Photoswitching in a Liquid Crystalline Pt(II) Coordination Complex.

Photoswitching of photoluminescence has sparked tremendous research interests for super-resolution imaging, high-security-level anti-counterfeiting, and other high-tech applications. However, the excitation of photoluminescence is usually ready to trigger the photoswitching process, making the photoluminescence readout unreliable. Herein, we report a new photoswitch by the marriage of spiropyran with platinum(II) coordination complex. Viable photoluminescence can be achieved upon excitation by 480 nm visible light while the photoswitching can be easily triggered by 365 nm UV light. The feasible photoswitching may be benefited from the formed liquid crystalline (LC) phase of the designed photoswitch as a crystalline spiropyran is normally unable to implement photoswitching. Compared to the counterparts, this LC photoswitch can show distinct and reliable apparent colors and emission colors before and after photoswitching, which may promise the utility in high-security-level anti-counterfeiting and other advanced information technologies.

Regulating Gelation and Luminescence Behaviors of Single Pyridine-Functionalized Cyanostilbene via Metal Ions.

Luminescent metal-organic gels (LMOGs) have gained much attention due to their crucial role in visual recognition and information encryption. However, it is still a challenge to simplify the design of ligands and enrich the stimuli responses in LMOGs simultaneously. Herein, although a single pyridine ligand cannot form gel alone, after coordination with metal ions, two kinds of LMOGs have been obtained with pyridine-metal complexes, where metal ions can act as cogelators and regulate luminescence of the pyridine-functionalized cyanostilbene ligand at the same time. The effects of metal types on the fluorescence emission color, the fluorescence quantum yield, the fibril network, and the assembly mode of the gel have been investigated systematically. In addition, two competitive ligands were used to regulate the fluorescence and phase transition of the gel. Finally, the logic gates and the information encryption and decryption have been successfully constructed. This kind of material is expected to be applied to fluorescence display, advanced information encryption, high-tech anticounterfeit, and so forth.

A quadruple-stimuli responsive supramolecular hydrogel constructed from a poly(acrylic acid) derivative and ß-cyclodextrin dimer.

The fabrication of stimulus-responsive supramolecular hydrogels as smart materials has attracted much attention in recent years. However, the multi-stimuli responsiveness often requires complicated chemical synthesis and rational molecular design. Herein, a quadruple-stimuli responsive supramolecular hydrogel was designed through the host-guest interaction between a ß-CD dimer and a methoxy-azobenzene (mAzo) and ferrocene (Fc) grafted poly(acrylic acid) derivative, as well as through the electrostatic interaction of negatively charged carboxyl side groups. Owing to the dynamic properties of the host-guest and electrostatic interactions, reversible sol-gel transition can be triggered by various stimuli, including temperature, light irradiations, pH changes and chemical redox reagents. As a result, the release of rhodamine B loaded in the hydrogel can be accelerated by green light irradiation, oxidizing agents and low pH, demonstrating potential applications in biomedical materials.

Effects and mechanism of Qingke Pingchuan granules against influenza virus infection.

Qingke Pingchuan granules (QPGs), which contain Houttuynia cordata Thunb, Fritillaria cirrhosa, fired licorice, and fired bitter almonds, among other components, can clear heat and ventilate the lungs, relieving cough and asthma. Clinically, QPGs are mainly used to treat cough, asthma, fever and other discomforts caused by acute or chronic bronchitis. In this study, the antiviral activity of QPGs against respiratory syncytial virus (RSV), influenza A virus A/FM/1/47 (H1N1), oseltamivir-resistant H1N1, A/Beijing/32/92 (H3N2), Sendai virus, and human adenovirus type 3 in Hep-2 or MDCK cells was evaluated using the CCK-8 method, and the cytotoxicity of QPGs to these two cell lines was tested. The effect of QPGs on mice infected with influenza A virus A/FM/1/47 (H1N1) was evaluated by measuring body weight, survival time, and survival rate, as well as virus titers and lesions in the lungs and levels of inflammatory factors in serum. In addition, the expression of TLR-7-My88-NF-κB signaling pathway-related proteins in lung tissues was analyzed by Western blotting and qRT-PCR. The results showed that QPGs had a potent inhibitory effect on the six viruses tested in vitro. Interestingly, QPGs also displayed particularly pronounced antiviral activity against H1N1-OC, similar to that of oseltamivir, a well-known antiviral drug. QPGs effectively protected mice from infection by H1N1, as indicated by significantly increased body weights, survival times, and survival rates and reduced lung virus titers of inflammatory factors and lung tissue injury. The levels of TLR-7-MyD88-NF-κB-pathway-related proteins in the lung tissue of infected mice were found to be decreased after QPG treatment, thereby alleviating lung injury caused by excessive release of inflammatory factors. Taken together, these findings indicate that QPGs have satisfactory activity against influenza virus infection.

GY-SLAM: A Dense Semantic SLAM System for Plant Factory Transport Robots.

Simultaneous Localization and Mapping (SLAM), as one of the core technologies in intelligent robotics, has gained substantial attention in recent years. Addressing the limitations of SLAM systems in dynamic environments, this research proposes a system specifically designed for plant factory transportation environments, named GY-SLAM. GY-SLAM incorporates a lightweight target detection network, GY, based on YOLOv5, which utilizes GhostNet as the backbone network. This integration is further enhanced with CoordConv coordinate convolution, CARAFE up-sampling operators, and the SE attention mechanism, leading to simultaneous improvements in detection accuracy and model complexity reduction. While mAP@0.5 increased by 0.514% to 95.364, the model simultaneously reduced the number of parameters by 43.976%, computational cost by 46.488%, and model size by 41.752%. Additionally, the system constructs pure static octree maps and grid maps. Tests conducted on the TUM dataset and a proprietary dataset demonstrate that GY-SLAM significantly outperforms ORB-SLAM3 in dynamic scenarios in terms of system localization accuracy and robustness. It shows a remarkable 92.59% improvement in RMSE for Absolute Trajectory Error (ATE), along with a 93.11% improvement in RMSE for the translational drift of Relative Pose Error (RPE) and a 92.89% improvement in RMSE for the rotational drift of RPE. Compared to YOLOv5s, the GY model brings a 41.5944% improvement in detection speed and a 17.7975% increase in SLAM operation speed to the system, indicating strong competitiveness and real-time capabilities. These results validate the effectiveness of GY-SLAM in dynamic environments and provide substantial support for the automation of logistics tasks by robots in specific contexts.

Layer-Controllable "2.5D" DNA Origami Crystals Synthesized by a Hierarchical Assembly Strategy.

The finite periodic arrangement of functional nanomaterials on the two-dimensional scale enables the integration and enhancement of individual properties, making them an important research topic in the field of tuneable nanodevices. Although layer-controllable lattices such as graphene have been successfully synthesized, achieving similar control over colloidal nanoparticles remains a challenge. DNA origami technology has achieved remarkable breakthroughs in programmed nanoparticle assembly. Based on this technology, we proposed a hierarchical assembly strategy to construct a universal DNA origami platform with customized layer properties, which we called 2.5-dimensional (2.5D) DNA origami crystals. Methodologically, this strategy divides the assembly procedure into two steps: 1) array synthesis, and 2) lattice synthesis, which means that the layer properties, including layer number, interlayer distance, and surface morphology, can be flexibly customized based on the independent designs in each step. In practice, these synthesized 2.5D crystals not only pioneer the expansion of the DNA origami crystal library to a wider range of dimensions, but also highlight the technological potential for templating 2.5D colloidal nanomaterial lattices.

Light-Responsive Supramolecular Liquid-Crystalline Metallacycle for Orthogonal Multimode Photopatterning.

The development of multimode photopatterning systems based on supramolecular coordination complexes (SCCs) is considerably attractive in supramolecular chemistry and materials science, because SCCs can serve as promising platforms for the incorporation of multiple functional building blocks. Herein, we report a light-responsive liquid-crystalline metallacycle that is constructed by coordination-driven self-assembly. By exploiting its fascinating liquid crystal features, bright emission properties, and facile photocyclization capability, a unique system with spatially-controlled fluorescence-resonance energy transfer (FRET) is built through the introduction of a photochromic spiropyran derivative, which led to the realization of the first example of a liquid-crystalline metallacycle for orthogonal photopatterning in three-modes, namely holography, fluorescence, and photochromism.

Compound Qiying Granules alleviates diabetic peripheral neuropathy by inhibiting endoplasmic reticulum stress and apoptosis.

BACKGROUND: Diabetic peripheral neuropathy (DPN) is a major complication of diabetes. This study aimed to investigate the therapeutic effects and molecular mechanisms of Compound Qiying Granules (CQYG) for DPN. METHODS: Rats and RSC96 cells of DPN models were established to evaluate the therapeutic effects of CQYG. Then the morphology and apoptotic changes of sciatic nerves were detected. Further, tandem mass tag based quantitative proteomics technology was used to identify differentially expressed proteins (DEPs) and the underlying molecular mechanisms. Protein expression of key signaling pathways was also detected. RESULTS: CQYG treatment significantly improved blood glucose and oxidative stress levels, and further reduced nerve fiber myelination lesions, denervation, and apoptosis in DPN rats. Further, 2176 DEPs were found in CQYG treated DPN rats. Enrichment analysis showed that protein processing in the endoplasmic reticulum (ER), and apoptosis were all inhibited after CQYG treatment. Next, CQYG treatment reduced inflammatory factor expression, mitochondrial damage, and apoptosis in RSC96 cells which induced by high glucose. Transmission electron microscopy results found that CQYG treatment improved the morphology of nerve myelin, mitochondria, and ER. CQYG treatment decreased ER stress and apoptosis pathway proteins that were highly expressed in DPN models. In addition, we also predicted the potential targets of CQYG in DEPs. CONCLUSIONS: CQYG exerts neuroprotective effects in experimental diabetic neuropathy through anti-ER stress and anti-apoptosis.

Visual Assay for Methicillin-Resistant Staphylococcus aureus Based on Rolling Circular Amplification Triggering G-Quadruplex/Hemin DNAzyme Proximity Assembly.

Nowadays, infections caused by methicillin-resistant Staphylococcus aureus (MRSA) have constituted a new challenge for anti-infective treatment. Precise identification and rapid clinical diagnostics of MRSA from other methicillin-sensitive strains entail assays with robust diagnostic efficiency and simple operation steps. Sensitive detection of MecA gene is promising to indicate MRSA infection, but it is challenged by the lack of isothermal and simple strategies. A visual assay based on isothermal rolling circular amplification and G-quadruplex/hemin (G4/hemin) DNAzyme proximity assembly was proposed for the immediate, efficient, and cost-effective detection of MecA in simple operation steps and in a single tube. The presence of MecA specifically drove the formation of circular templates, which further triggered isothermal amplification. The amplified product offered abundant binding sites for DNA-grafted hemin probes to form a novel proximity-assembled G4/hemin DNAzyme structure for colorimetric changing diagnosis. This tandem-repeated novel DNAzyme possessed higher catalytic activity and a lower background signal than traditional G4/hemin DNAzyme, ensuring sensitive discrimination of MRSA (limit of detection: 9.6 pM). Assay stability and antimatrix interference capability enable clinical application, which shows compared diagnostic ability with classic methods (100% sensitivity and 100% specificity) but possesses more simplified procedures and shorter turnaround time (<6 h). This colorimetric strategy in a nonsite-specific and hypersensitive manner holds foreseeable prospects in clinical diagnostic and research applications.

Balancing Compatibility and Gelability for High-Performance Cholesteric Liquid Crystalline Physical Gels.

Liquid crystalline physical gels (LCPGs) have attracted increasing interest because of their mechanical properties and stimulus-response behaviors. However, due to their gelator properties such as thermal stability, gelation capability, and compatibility in liquid crystals, development of LCPGs with high performances still remains a huge challenging task. Herein, four novel gelators ((l)-PH, (d)-PH, (l)-P2H, and (d)-P2H) based on 1,4-benzenedicarboxamide phenylalanine derivatives containing one or two ethylene glycol groups have been designed and synthesized. It is found that the ethylene glycol group plays a significant role in improving the compatibility between the gelator and the liquid crystal. All of the prepared compounds can form stable LCPGs in P0616A. In particular, the storage modulus of LCPG with 9.0 wt % of (l)-PH with one ethylene glycol unit is higher than 106 Pa, which is similar to SmC gels and advantageous over previously reported nematic LCPGs. Furthermore, the prepared gels display a strong Cotton effect with hand-preferred twisted fiber networks and the self-assembled aggregates of (l)-PH can induce P0616A to form a cholesteric fingerprint structure. Thus, these low molecular weight gelators provide a strategy to construct high-performance cholesteric LCPGs for the realization of LC device applications.

Extending Conjugation of Linear Cyanostilbene Derivatives via a Pyridine Moiety for Multi-Stimuli-Responsive Fluorescence Organogels.

In the design of effective gelators with aggregation-induced emission behavior, amide and cholesterol moieties are generally used to provide multiple driving forces for gelation. In this work, a series of linear cyanostilbene gelators with a pyridine moiety and different lengths of the alkoxyl group, i.e., CSpy-Cn, have been synthesized through nucleophilic substitution and Knoevenagel reaction. The direct connection of pyridine extends the conjugation of the cyanostilbene moiety, while the alkoxyl group can regulate the solubility of the compounds so that the compounds can serve as gelators for common solvents such as acetonitrile, dimethyl sulfoxide, and ethanol at ultra-low concentrations. At the same time, the cyanostilbene group makes the compounds undergo photoisomerization and emit fluorescence under UV light, while the pyridine group can serve as an acid-base responsive group due to easy protonation. The gels can respond to temperature, light, and organic acid/base. The fluorescence intensity and color can reversibly change during the gel-sol transitions. Finally, a thin film based on the CSpy-C8 xerogel has been prepared and utilized as a multi-stimuli-responsive fluorescence display for information storage and anti-counterfeiting.

Two-Color Cholesteric Liquid Crystalline Gels for Reversible Writing and Erasing Information Encryption.

Bright structural color derived from the unique helical superstructure of cholesteric liquid crystals (CLCs) has attracted much attention. In addition, fluorescence color is an intrinsic emission upon excitation, which can be observed often under UV light. However, it is a challenge to combine the fluorescence and structural colors to construct a self-supporting system at the same time. In this work, a photoresponsive cyanostilbene-based gelator (CSpy-C10) is synthesized, which emits blue fluorescence in LC. CSpy-C10 can gel LCs and further construct thermo-/photoresponsive CLC physical gels. The structural color of the CLCs, fluorescence, and mechanical properties of the gels can be independently regulated due to the separation of the chiral unit and photoresponsive unit with aggregation-induced emission behavior. Finally, the reversible information encryption including writing and erasing based on the changes in fluorescence are explored. This kind of two-color material can be applied in the fields ranging from information encryption, fluorescent display to high-tech anticounterfeiting.

One-Step In Situ Polymerization: A Facile Design Strategy for Block Copolymer Electrolytes.

To optimize the rapid transport of lithium ions (Li+ ) inside lithium metal batteries (LMBs), block copolymer electrolytes (BCPEs) have been fabricated in situ in LMBs via a one-step method combining reversible addition-fragmentation chain transfer (RAFT) polymerization and carboxylic acid-catalyzed ring-opening polymerization (ROP). The BCPEs balanced the Li+ coordination characteristics of the polyether- and polyester-based electrolytes to achieve a rapid Li+ migration in the SPEs. The carboxylic acid played a dual role since it both catalyzed the ROP and stabilized the interface. Furthermore, the in situ assembly of LMBs did effectively enable an efficient intercalation/de-intercalation of Li+ at the electrode/electrolyte interface. The in situ assembled Li/BCPE4/LFP exhibited high-capacity retention of 92 % after 400 cycles at 1 C. The one-step in situ fabrication of BCPEs provides a new direction for the design of polymer electrolytes.

Naphthyl Substituted Impurities Induce Efficient Room Temperature Phosphorescence.

Accidentally, it was found that triphenylamine (TPA) from commercial sources shows ultralong yellow-green room temperature phosphorescence (RTP) like commercial carbazole, which however disappears for lab-synthesized TPA with high purity. Herein, we for the first time identify the impurity types that cause RTP of commercial TPA, which are two N, N-diphenyl-naphthylamine isomers. Due to similar molecular polarity and very trace amount (≈0.8 ‰, molar ratio), these naphthyl substituted impurities can be easily overlooked. We further show that even at an extremely low amount (1000000 : 1, mass ratio) of impurities, RTP emission is still generated, attributed to the triplet-to-triplet energy transfer mechanism. Notably, this doping strategy is also applicable to the triphenylphosphine and benzophenone host systems, of which strong RTP emission can be activated by simply doping the corresponding naphthyl substituted analogues into them. This work therefore provides a general and efficient host/guest strategy toward high performance and diverse organic RTP materials.

Deep-Red Emissive Squaraine-AIEgen in Elastomer Enabling High Contrast and Fast Thermoresponse for Anti-Counterfeiting and Temperature Sensing.

Two challenges remain for organic thermoresponsive materials; one is to develop high-performance red-emissive thermoresponsive materials, while another is to simultaneously achieve high contrast ratio (CR), fast and reversible thermoresponse in a single element. Herein, we not only develop a new deep-red emissive squaraine-based AIEgen (TPE-SQ12) based on a pyrylium end group, which is suitable for fabricating high-performance thermoresponsive materials, but also show an effective approach to improve both CR (∼ten times increase) and response time (less than 3 seconds), that is, molecularly dispersing AIEgen into an elastomer, attributed to the significantly expanded free volume of elastomer upon increasing the temperature that can activate the AIEgen intramolecular movements more pronouncedly. Double encryption and temperature mapping systems have been separately established by using our designed elastomer/TPE-SQ12 film, showing the great potential for anti-counterfeiting and temperature sensing. Finally, white emission is further achieved by co-doping TPE-SQ12 with cyan dye into elastomer, which enables fluorescent thermochromism for improving the temperature mapping ability.

Photopatterning of Carbon Dots in Poly(vinyl alcohol) with Photoacid Generators.

Carbon dots (CDs) have drawn considerable attention owing to their attractive photoluminescence, advantageous chemical tolerance, good biocompatibility, and so on. However, it remains challenging to tune their photoluminescence spatially and temporally due to their high photostability. Herein, a viable approach to in-situ dialing the photoluminescence of CDs by using light in the presence of a photoacid generator (PAG, e.g., diphenyliodonium hexafluorophosphate) is demonstrated. Fluorescence quenching occurs upon light irradiation due to the protonation of pyridine and amino nitrogen atoms of CDs according to X-ray photoelectron spectroscopy and cyclic voltammetry. As such, blue, green, and red color fluorescent patterns of CDs are ready to form in poly(vinyl alcohol) by light irradiation under photomask. These patterns not only show a controlled preservation time under room light, but also can be erased on demand by flood UV irradiation, which are promising for advanced anti-counterfeiting such as shelf-life based security and erasable encryption.

A Porphyrinic Donor-Acceptor Conjugated Porous Polymer as Highly Efficient Photocatalyst for PET-RAFT Polymerization.

Heterogeneous catalysts offer a highly desirable platform for exploring environmental-benign transformation systems, yet, they typically suffer from significant loss of catalytic efficiency compared with their homogeneous counterparts. Here, the facile synthesis of a porphyrinic conjugated porous polymer incorporated with imidazolium bromide moieties by taking advantage of the Debus-Radziszewski reaction is reported. Owing to the unique donor-acceptor structure, this heterogeneous and metal-free photocatalyst exhibits much improved catalytic activity compared with its small molecular analogs in photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, producing polymers with narrow distribution (D = 1.06-1.18) and high degree of chain-end fidelity. Moreover, the heterogeneous catalyst can be easily separated at the end of polymerization by centrifugation and recycled for five independent PET-RAFT polymerizations without obvious decreases in catalytic efficiency.

MoS2 Decorated Silver Nanowire-Reduced Graphene Oxide Aerogel Micro-Particle for Thermally Conductive Polymer Composites with Enhanced Flame Retardancy.

Multifunctional polymer composites with efficient heat dissipation and flame retardancy are highly desirable in the electronic industry. Here, by the combination of hydrothermal reaction and in situ fragmentation, molybdenum disulfide (MoS2 ) decorated silver nanowires (AgNWs) and 3D reduced graphene oxide (RGO) (AgNW-RGO@MoS2 ) aerogel micro-particles (AMPs) are successfully prepared. When the above AMP is introduced to epoxy (EP) resin by the simple blending method, a polymer composite with continuous thermally conductive pathways and flame barrier layers is achieved. With an AMP loading of 4.0 vol.%, the polymer composite displays superior enhancement in thermal conductivity up to 420%. Compared to neat EP, the peak heat release rate and total heat release decreases by 61.1% and 58.8%, respectively. This work provides new insights into the design and large-scale fabrication of multifunctional polymer composites for efficient thermal management materials.

Helix Induction and Inversion of Polymeric Foldamer Regulated by the Single Enantiomers.

Generally, a single enantiomer can induce a foldamer into a preferred-handed helix, while another condition is required for the helical inversion. Herein, it is found that the helix induction and subsequent inversion of poly(m-phenylene diethynylene)-based foldamer bearing aza-18-crown-6 pendants (Poly-1) can be realized by increasing the concentration of sterically hindered l-amino acid perchlorate salts. When the amount of chiral enantiomers is small, one enantiomer tends to complex with two non-adjacent aza-18-crown-6 rings via three N+ H···O hydrogen bonds in a sandwich mode. Notably, the transition dipole moment is perpendicular to the aza-18-crown-6 ring, so that the induced helical chirality in Poly-1 backbone is opposite to the chirality of enantiomers. When the amount of chiral enantiomers is large enough, each aza-18-crown-6 is occupied by one enantiomer, which causes the transition dipole moment in a parallel direction to aza-18-crown-6 ring. In this case, the increased steric hindrance can facilitate the inversion of screw sense of Poly-1 backbone, which is directed by chiral center of enantiomers. As a result, a helix inversion has been achieved successfully. This work not only provides a novel strategy for regulating the two-stage folded helical conformations by the single enantiomers, but opens a window to develop chiral recognition materials.

Configuration-Dependent Liquid Crystal and Gel Behaviors of Tetraphenylethene-Containing Main-Chain Copolyesters.

The construction of aggregation-induced emission-active (AIE-active) gelators with liquid crystal properties remains a challenge. Moreover, the effects of AIE configuration on liquid crystal, gel and AIE behaviors in one system are unclear. Herein, two main-chain liquid crystalline copolyester gelators with a single configuration of AIEgen TPE, mesogen biphenyl, and pendent amide groups are synthesized through melt polycondensation. Both copolyesters display smectic phase, while E-P20 possesses a wider temperature range of liquid crystal and a narrower layer distance owing to the more serious nonlinear "defect" of Z-TPE than E-TPE units. In addition, E-P20 and Z-P20 can form AIE-active gels with the minimum gelation concentration (MGC) values of 10 and 4 wt% in ethyl acetate mainly via hydrogen bonds between the pendent amide groups, respectively. These AIE-active gels show potential applications in temperature sensor, information storage, and so on.