Analysis of omarigliptin forced degradation products by ultra-fast liquid chromatography, mass spectrometry, and in vitro toxicity assay.

Omarigliptin (OMG) is an antidiabetic drug indicated for the treatment of type 2 diabetes mellitus. Forced degradation studies are practical experiments to evaluate the stability of drugs and to establish degradation profiles. Herein, we present the investigation of the degradation products (DPs) of OMG formed under various stress conditions. OMG was subjected to hydrolytic (alkaline and acidic), oxidative, thermal, and photolytic forced degradation. A stability-indicating ultra-fast liquid chromatography method was applied to separate and quantify OMG and its DPs. Five DPs were adequately separated and detected in less than 6 min, while other published methods detected four DPs. MS was applied to identify and obtain information on the structural elucidation of the DPs. Three m/z DPs confirmed previously published research, and two novel DPs were described in this paper. The toxicity of OMG and its DPs were investigated for the first time using in vitro cytotoxicity assays, and the sample under oxidative conditions presented significant cytotoxicity. Based on the results from forced degradation studies, OMG was found to be labile to hydrolysis, oxidation, photolytic, and thermal stress conditions. The results of this study contribute to the quality control and stability profile of OMG.

Development of stability-indicating assay method and liquid chromatography-quadrupole-time-of-flight mass spectrometry-based structural characterization of the forced degradation products of alpelisib.

The US Food and Drug Administration and the European Medicines Agency approved alpelisib in 2019 for the treatment of metastatic breast cancer. A thorough literature review revealed that a stability-indicating analytical method (SIAM) is not available for the quantification of alpelisib and its degradation products (DPs). In this study, per the comprehensive stress study recommended by the International Council for Harmonisation (ICH), alpelisib was exposed to hydrolysis, oxidation, photolysis, and thermal stress. Degradation of the drug was observed under hydrolysis, oxidative, and photolysis conditions, whereas the drug was stable under thermal stress condition. We developed a SIAM for the separation of alpelisib and its major DPs that were formed under different stress conditions. The validation of the developed method was performed per ICH Q2(R1) guidelines. Five DPs were identified and characterized. Structure elucidation of all DPs was performed with the modern characterization tool of liquid chromatography-quadrupole time-of-flight mass spectrometer (LC-Q-TOF-MS/MS). The degradation pathway of the drug and its mechanisms were outlined, and in silico toxicity prediction was performed using the ProTox-II tool.

Effect of ph on migration patterns and degradation pathways of sulfamethazine in soil systems.

Sulfonamide antibiotics (SAs) are widely used antimicrobial agents in livestock and aquaculture, and most of them entering the animal's body will be released into the environment as prodrugs or metabolites, which ultimately affect human health through the food chain. Both acid deposition and salinization of soil may have an impact on the migration and degradation of antibiotics. Sulfamethazine (SM2), a frequently detected compound in agricultural soils, has a migration and transformation process in the environment that is closely dependent on environmental pH. Nevertheless, scarcely any studies have been conducted on the effect of soil pH changes on the environmental behavior of sulfamethazine. We analyzed the migration and degradation mechanisms of SM2 using simulation experiments and ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS) techniques. The results showed that acidic conditions limited the vertical migration of sulfadimidine, and SM2 underwent different reaction processes under different pH conditions, including S-C bond breaking, S-N bond hydrolysis, demethylation, six-membered heterocyclic addition, methyl hydroxylation and ring opening. The study of the migration pattern and degradation mechanism of SM2 under different pH conditions can provide a solid theoretical basis for assessing the pollution risk of sulfamethazine degradation products under acid rain and saline conditions, and provide a guideline for remediation of antibiotic contamination, so as to better prevent, control and protect groundwater resources.

Predictive value of D-dimer and fibrinogen degradation product for splanchnic vein thrombosis in patients with severe acute pancreatitis: a single-center retrospective study.

BACKGROUND AND AIM: Early diagnosis of splanchnic vein thrombosis (SVT) after severe acute pancreatitis (SAP) remains difficult because of its insidious onset. Common serum markers for thrombosis such as D-dimer (D-D) have lost their diagnostic value due to their elevation in non-thrombotic patients with SAP. The aim of this study is to predict SVT after SAP using common serum indicators of thrombosis by establishing a new cut-off value. METHODS: 177 SAP patients were included in a retrospective cohort study from September 2019 to September 2021. Patient demographics, dynamic changes of coagulation and fibrinolysis indicators were collected. Univariate analyses and binary logistic regression analyses were applied to assess potential risk factors for the development of SVT in SAP patients. A receiver operating characteristic (ROC) curve was generated to assess the predictive value of independent risk factors. Moreover, clinical complications and outcomes were compared between two groups. RESULTS: Among 177 SAP patients, 32 (18.1%) developed SVT. The most common cause of SAP was biliary (49.8%), followed by hypertriglyceridemia (21.5%). Multivariate logistic regression analyses showed that D-D (OR, 1.135; 95%CI, 1.043-1.236; p = 0.003) and fibrinogen degradation product (FDP) (OR, 1.037; 95%CI, 1.015-1.060; p = 0.001) were independent risk factors for SVT development in patients with SAP. The area under ROC curve for D-D was 0.891 (p = 0.003, sensitivity= 95.3%, specificity = 74.1%) at a cut-off value of 6.475, and the area under ROC curve for FDP was 0.858 (p = 0.001, sensitivity = 89.4%, specificity = 72.4%) at a cut-off value of 23.155. CONCLUSION: D-D and FDP are significant independent risk factors with high predictive value for SVT in patients with SAP.

Determination of ivacaftor by liquid chromatography techniques in pharmaceutical formulation with interlaboratory comparison and characterization of five novel degradation products by high-performance liquid chromatography ion trap time-of-flight mass spectrometry.

Cystic fibrosis is a life-threatening genetic disease that causes damage to the lungs. Ivacaftor, the first drug to target the underlying defect of the disease caused by specific mutations, improves outcomes and reduces hospitalizations. In this study, quantitative determination of ivacaftor was performed by liquid chromatography, while high-resolution mass spectrometric analyses were performed for qualitative determination. The validation studies of the developed methods were performed according to International Conference on Harmonisation Q2(R1) guideline. Ivacaftor was separated from its degradation product by using Phenomenex Kinetex C18 (150 × 3 mm, 2.6 µm) column. The isocratic mobile phase for binary pump configuration was 0.1% (v/v) formic acid in water and 0.1% (v/v) formic acid in acetonitrile (27:63) (v/v), pH = 2.5; the flow rate of 0.25 mL/min was used in all methods. In the degradation studies, five degradation products were identified using high-performance liquid chromatography ion trap time-of-flight mass spectrometric analyses: three of them have never been reported up to date; whereas the other two were existing in the literature and they were having Chemical Abstracts Services registry numbers since they were synthesized before for various other purposes. Also, analysis of an in-lab prepared chemical equivalent of Kalydeco® and interlaboratory comparison were performed.

Toxicity and Environmental Risk Assessment of Polycarbamate and Its Main Components to Marine Algae and Crustaceans.

Polycarbamate is commonly used as an antifoulant coating on fishing nets in Japan. Although its toxicity to freshwater organisms has been reported, its toxicity to marine organisms is currently unknown. We conducted algal growth inhibition and crustacean immobilization tests to assess the effects of polycarbamate on marine organisms. We also evaluated the acute toxicity of the main components of polycarbamate, namely, dimethyldithiocarbamate and ethylenebisdithiocarbamate, to algae, which are the most sensitive tested organisms to polycarbamate. The toxicities of dimethyldithiocarbamate and ethylenebisdithiocarbamate partially explain that of polycarbamate. To assess the primary risk, we derived the predicted no-effect concentration (PNEC) for polycarbamate in a probabilistic manner using species sensitivity distributions. The 72 h no observed effect concentration (NOEC) of polycarbamate to the alga Skeletonema marinoi-dohrnii complex was 0.45 µg/L. The toxicity of dimethyldithiocarbamate may have contributed up to 72% of the toxicity observed for polycarbamate. The fifth percentile of hazardous concentration (HC5) derived from the acute toxicity values was 0.48 µg/L. Comparison of previously reported environmental polycarbamate concentrations in Hiroshima Bay, Japan, to the PNEC estimated using the minimum NOEC and HC5 suggest that polycarbamate currently poses a high ecological risk. Therefore, reducing the risk by restricting polycarbamate use is necessary.

Application of the pulmonary embolism rule-out criteria (PERC rule) and age-adjusted D-Dimer in patients undergoing computed tomography pulmonary angiography for diagnosis of pulmonary embolism.

Background: Diagnosis of pulmonary embolism (PE) constitutes a challenge for practitioners. Current practice involves use of pre-test probability prediction rules. Several strategies to optimize this process have been explored. Objectives: To explore whether application of the pulmonary embolism rule-out criteria (PERC rule) and age-adjusted D-dimer (DD) would have reduced the number of computed tomography pulmonary angiography (CTPA) examinations performed in patients with suspected PE. Methods: A retrospective cross-sectional study of adult patients taken for CTPA under suspicion of PE in 2018 and 2020. The PERC rule and age-adjusted DD were applied. The number of cases without indications for imaging studies was estimated and the operational characteristics for diagnosis of PE were calculated. Results: 302 patients were included. PE was diagnosed in 29.8%. Only 27.2% of 'not probable' cases according to the Wells criteria had D-dimer assays. Age adjustment would have reduced tomography use by 11.1%, with an AUC of 0.5. The PERC rule would have reduced use by 7%, with an AUC of 0.72. Conclusions: Application of age-adjusted D-dimer and the PERC rule to patients taken for CTPA because of suspected PE seems to reduce the number of indications for the procedure.

Contexto: O diagnóstico de embolia pulmonar (EP) representa um desafio para o profissional. A prática atual envolve o uso de modelos de previsão de probabilidade pré-teste e, para otimizar esse processo, várias estratégias têm sido exploradas. Objetivos: Investigar se a aplicação dos critérios de exclusão de EP (pulmonary embolism rule-out criteria, PERC) e do D-dímero (DD) ajustado para idade diminui o número de angiografias computadorizadas (ATCs) pulmonares realizadas em pacientes com suspeita de EP. Métodos: Estudo transversal retrospectivo com pacientes adultos submetidos a ATC pulmonar com suspeita de EP em 2018 e 2020. Foram aplicados os critérios PERC e o DD ajustado para idade. Foi estimado o número de casos não indicados para exames de imagem, e foram calculadas as características operacionais para o diagnóstico de EP. Resultados: Foram incluídos 302 pacientes, dos quais 29,8% apresentaram diagnóstico de EP. Apenas 27,2% dos casos não prováveis ​​de acordo com os critérios de Wells apresentaram DD; o ajuste implicou em uma diminuição de ACTs de 11,1%, com área sob a curva de 0,5. Os critérios PERC diminuiriam em 7%, com área sob a curva de 0,72. Conclusões: A aplicação do DD ajustado para idade e dos critérios PERC em pacientes submetidos a ATC pulmonar por suspeita de EP parece diminuir a indicação para tais exames.

Limited value of coagulation parameters in diagnosing periprosthetic joint infection.

PURPOSE: Exploring biomarkers for easy and reliable diagnosis of periprosthetic joint infection (PJI) has attracted an increasing attention. Coagulation parameters have been found to be associated with infections, but their role in diagnosing PJI is not well understood. The aim of this study was to explore the diagnostic value of coagulation parameters in PJI. METHODS: We retrospectively recruited patients who underwent revision total hip arthroplasty (THA) and total knee arthroplasty (TKA) from January 2014 to December 2020. Patients were grouped into PJIs or non-PJIs, and PJIs were further divided into culture positive and culture negative groups. The diagnostic value of coagulation parameters including fibrin degradation product (FDP), D-dimer, platelet count (PC), and platelet count to mean platelet volume ratio (PVR) was evaluated by using receiver operating characteristic curve, in comparison with traditional biomarkers C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR). RESULTS: A total of 186 patients including 136 THA and 50 TKA were studied. There were 105 PJI and 81 non-PJI patients. The coagulation parameters showed an inferior performance to CRP and ESR, with the area under the curve (AUC) of FDP, D-dimer, PC, PVR, CRP, and ESR being 0.805, 0.571, 0.703, 0.704, 0.882, and 0.824, respectively. The diagnostic performance of those coagulation parameters was similar in THA and TKA PJIs and was not superior to ESR or CRP in either culture-positive or culture-negative PJIs. CONCLUSION: Coagulation parameters FDP, D-dimer, PC, and PVR are of limited value for the diagnosis of periprosthetic joint infection in both THA and TKA patients.

In Vitro Reactivity of the Glucose Degradation Product 3,4-Dideoxyglucosone-3-ene (3,4-DGE) towards Abundant Components of the Human Blood Circulatory System.

3,4-Dideoxyglucosone-3-ene (3,4-DGE) is a glucose degradation product present in processed foods and medicinal products. Additionally, its constant formation from 3-deoxyglucosone in plasma has been suggested. Due to its α,ß-unsaturated dicarbonyl moiety, 3,4-DGE is highly reactive and has shown harmful effects in vitro. Here, we investigated the impact of major components of the human blood circulatory system on 3,4-DGE in vitro. Under physiological conditions, plasma concentrations of human serum albumin (HSA) reacted efficiently with 3,4-DGE, resulting in only 8.5% of the initial 3,4-DGE concentration after seven hours (vs. 83.4% without HSA, p < 0.001). Thereby, accessible thiol groups were reduced from 0.121 to 0.064 mol/mol HSA, whereas ketoprofen binding and esterase-like activity of HSA were not affected. Plasma concentrations of glutathione (GSH) reacted immediately and completely with 3,4-DGE, leading to two stereoisomeric adducts. Plasma concentrations of immunoglobulin G (IgG) bound to 3,4-DGE to a lower extent, resulting in 62.6% 3,4-DGE after seven hours (vs. 82.2% in the control, p < 0.01). Immobilized human collagen type IV did not alter 3,4-DGE concentrations. The results indicated that particularly HSA, GSH, and IgG readily scavenge 3,4-DGE after its appearance in the blood stream, which may be associated with a reduced antioxidative and cytoprotective activity for the living cells and, thus, the human organism by blocking free thiol groups.

Application of Hi-throat/Hi-volume SPE technique in assessing organophosphorus pesticides and their degradation products in surface water from Tai Lake, east China.

Organophosphorus pesticides (OPPs) are among the most commonly used pesticides worldwide. However, these compounds pose a serious threat to aquatic environments. Here, thirty-seven pesticides and eight degradation products were determined in surface water samples from Tai Lake, East China, using a high-volume solid phase extraction technique (Hi-throat/Hi-volume SPE). Surface water was pumped in-situ through a portable sampler, and OPPs in the water retained on the Hi-volume SPE adsorption column, finally extracted for analysis. This technique efficiently reduced the detection limits to below 0.3 ng/L. In total, 40 out of 45 OPP congeners were detected, which far exceeded the amount of OPPs in previous studies. The total concentration of OPPs ranged between 101.4 and 1530 ng/L (median: 378.9 ng/L). Parathion exhibited the highest concentration (median: 112.0 ng/L), followed by paraoxon-methyl (median: 90.3 ng/L), as well as carbophenothion, fenthion, and mevinphos. Agricultural areas were more polluted than residential and industrial regions. However, degradation products persisted in residential and industrial waters. The ecological risks of OPPs in these areas were estimated based on the risk quotient index (RQ). Parathion, fenthion, carbophenothion, and tolclofos-methyl occurred at high-risk levels, and the levels of degradation products were also non-trivial. Our findings thus indicated that OPP degradation products pose a potential threat to natural environments and should therefore be closely monitored.

Prediction of portal vein thrombosis after hepatectomy for hepatocellular carcinoma.

PURPOSE: Portal vein thrombosis (PVT) following hepatectomy is potentially life-threatening. We aimed to evaluate the incidence of PVT after hepatectomy for hepatocellular carcinoma and identify coagulation and fibrinolytic factors that could predict early-stage postoperative PVT. METHODS: A retrospective analysis was conducted on 65 hepatocellular carcinoma patients who underwent radical hepatectomy. The risk factors for postoperative PVT were identified based on univariate and multivariate analyses, and the levels of coagulation and fibrinolytic factors were measured during the perioperative period. RESULTS: The incidence of PVT after hepatectomy was 20.0%. The patients were divided into two groups: those with PVT (n=13; PVT group) and those without PVT (n=52; no-PVT group). The frequency of the use of the Pringle maneuver during surgery was higher in the PVT group than in the no-PVT group, and the postoperative/preoperative ratios of thrombin-antithrombin III complex (TAT) and of D-dimer were significantly higher in the PVT group. CONCLUSION: A high incidence of PVT was found in hepatocellular carcinoma patients after hepatectomy. The frequency of the Pringle maneuver is a potential risk factor for postoperative PVT, and the postoperative/preoperative TAT and D-dimer ratios may be used as early predictors of PVT after hepatectomy for hepatocellular carcinoma.

Oxidative degradation profile studies of tavaborole by a validated stability indicating RP-UPLC method: Isolation and characterization of novel degradant using 2D-NMR and HRMS.

The current research work reports a study on the degradation profile of tavaborole, which is an oxaborole antifungal drug used to treat infections in the toenails. This work also reports the chemical stability of tavaborole in different stress conditions along with the isolation and characterization of degradation products by high-resolution mass spectrometry and two-dimensional nuclear magnetic resonance techniques. A sensitive and reproducible stability-indicating ultra-performance liquid chromatography method was developed and validated for quantification of tavaborole bulk drug in the presence of degradation products. Significant degradation was observed during oxidative stress conditions using H2 O2 . It was observed that the drug was highly unstable under oxidation stress conditions and thus degradation profiles with various oxidizing reagents were studied. One unknown impurity (DP-1) was formed during peroxide degradation, which was isolated by reverse-phase preparative chromatography. The structure of this degradant was characterized by high-resolution mass spectrometry and multidimensional nuclear magnetic resonance techniques. The structure of this novel impurity DP-1 was identified as [4-fluoro-2-(hydroxymethyl)phenol], which was not reported as a degradant in the literature. An Acquity BEH C18 , 100 × 2.1 mm, 1.7 µm column was used to achieve the desired separation within a shorter runtime of 4.0 min. The method was validated for specificity, precision, linearity and accuracy over the concentration range of 5.0-400 µg ml-1 (r2 -0.9999) and limit of quantitation 5.0 µg ml-1 . This method is compatible with LCMS analysis which enables to identify the unknown impurities formed in the process.

Impurity profiling and stability-indicating method development and validation for the estimation of assay and degradation impurities of midostaurin in softgel capsules using HPLC and LC-MS.

Midostaurin (MDS) is used for the treatment of acute myeloid leukemia, myelodysplastic syndrome, and advanced systemic mastocytosis. MDS softgel capsule samples were subjected to stress testing per International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use guidelines for impurity profiling study. MDS underwent extensive degradation under stress testing (acid, alkaline, oxidative, photolytic, thermolytic, and hydrolysis conditions) and formed four degradation products (DPs). MDS and its DPs were separated well from one another with good resolution using reserved-phase HPLC using an Inertsil ODS-3V column (250 × 4.6 mm, 5 µm) and a mobile phase of ammonium formate (40 mM) and acetonitrile. The stability-indicating characteristic of the newly developed method was proven for the estimation of MDS assay, and its organic impurities were free from interference. The validated method exhibited excellent linearity, accuracy, precision, specificity, detection limit, and quantitation limit within 25 min run time. Stress testing, robustness, and solution stability were performed to ensure the continuous performance of the developed method. The peak fractions of DPs formed under stress testing were isolated and characterized using LC-MS, 1 H and 13 C NMR, IR, and UV-Vis. The structure of the major DPs was predicted as DP1 based on the spectral data. The proposed method is effectively used for MDS in bulk drug and finished formulations in the pharmaceutical industry.

Urinary C3d is elevated in patients with active Lupus nephritis and a fall in its level after 3 months predicts response at 6 months on follow up.

INTRODUCTION: Complement activation is central to the pathogenesis of lupus nephritis (LN). Low serum complement C3 and C4, are traditionally used as markers of lupus disease activity in general and LN in particular. In this study we prospectively measured plasma and urine C3d and C4d, degradation products of C3 and C4 corrected to creatinine in a cohort of biopsy proven LN in a longitudinal fashion for its correlation with disease activity. METHODS: Twenty eight biopsy proven active lupus nephritis (AN) were recruited along with four inactive nephritis (IN) and 10 healthy controls (HC). Plasma and urine were collected at baseline, prior to induction treatment and 3 months later. Clinical measures of disease activity, Systemic lupus erythematosus disease activity index 2000 (SLEDAI 2K), renal SLEDAI, serum C3, C4 and antibodies to ds DNA, urine protein and creatinine excretion (UP/UC) were collected. Plasma and urine C3d and C4d were measured using ELISA and normalized to spot urine creatinine value. RESULTS: Twenty eight AN of median age of 26.5 (20-31.50) years and disease duration of 3 (0.7-5) years were enrolled. The median urinary C3d/creatinine before treatment was 388.20 (48.98-1296) ng/mg which fell significantly to 62.69 (28.04-502.4) ng/mg at 3 months followup (p-0.01). The baseline values for the active renal disease was significantly different from IN group (9.9 (4.5-46.53 ng/mg) p-0.00). Treatment responders (partial and complete) at 6 months showed a significant fall in urinary C3d at 3 months whereas non responders had a non significant change in value. There was a significant correlation of urine C3d/creatinine with SLEDAI2K (r-0.433, p-0.00), renal SLEDAI (r-0.356, p-0.00), UP/UC ratio (r-0.489, p-<0.0001) but no significant correlation with C3 or C4. There was a significant fall in the median values of plasma C3d from 791.1 (516.0.00-1550.43) µg/ml to 338.52 (211.35-525.82) (p-0.00) µg/ml at the end of 3 months. The values showed a significant correlation with SLEDAI 2K, renal SLEDAI, UP/UC along with a significant negative correlation with C3 and C4. CONCLUSION: Urinary C3d/creatinine levels and plasma C3d levels can be used as biomarker of disease activity and treatment response.

Qualification of impurities based on metabolite data.

Regulatory Guidance documents ICH Q3A (R2) and ICH Q3B (R2) state that "impurities that are also significant metabolites present in animal and/or human studies are generally considered qualified". However, no guidance is provided regarding data requirements for qualification, nor is a definition of the term "significant metabolite" provided. An opportunity is provided to define those categories and potentially avoid separate toxicity studies to qualify impurities. This can reduce cost, animal use and time, and avoid delays in drug development progression. If the concentration or amount of a metabolite, in animals or human, is similar to that of the known, structurally identical impurity (arising from the administered test material), the qualification of the impurity on the grounds of it also being a metabolite is justified. We propose two complementary approaches to support conclusions to this effect: 1) demonstrate that the impurity is formed by metabolism in animals and/or man, based preferably on plasma exposures or, alternatively, amounts excreted in urine, and, where appropriate, 2) show that animal exposure to (or amount of) the impurity/metabolite is equal or greater in animals than in humans. An important factor of both assessments is the maximum theoretical concentration (or amount) (MTC or MTA) of the impurity/metabolite achievable from the administered dose and recommendations on the estimation of the MTC and MTA are presented.

Identification of and solution for false D-dimer results.

BACKGROUND: Clinically, D-dimer (DD) levels are mainly used to exclude diseases such as deep venous thrombosis (DVT). In clinical testing, DD assays can be subjected to interference that may cause false results, which directly affect the clinical diagnosis. Our hypothesis was that the 95% confidence intervals (CIs) of the fibrin degradation product (FDP)/DD and fibrinogen (Fib)/DD ratios were used to identify these false results and corrected via multiple dilutions. METHODS: In total, 16 776 samples were divided into three groups according to the DD levels detected by Sysmex CS5100 and CA7000: Group A, DD ≥ 2.0 µg/mL fibrinogen equivalent unit (FEU); group B, 0.5 < DD < 2.0 µg/mL FEU; and group C, DD ≤ 0.5 µg/mL FEU. The 95% CIs of the FDP/DD and Fib/DD ratios were calculated. Six abnormal DD results were found according to the 95% CIs. For verification, we performed multiple dilutions, compared the results with those of other instruments, and tested the addition of heterophilic blocking reagent (HBR). RESULTS: The median and 95% CI of the FDP/DD ratio were 3.76 and 2.25-8.15 in group A, 5.63 and 2.86-10.58 in group B, 10.23 and 0.91-47.71 in groups C, respectively. For the Fib/DD ratio, the 95% CIs was 0.02-2.21 in group A, 0.68-8.15 in group B, and 3.82-55.27 in groups C. Six abnormal results were identified after multiple dilutions, by comparison with other detection systems, and after HBR addition. CONCLUSIONS: The FDP/DD ratio is more reliable for identifying false results. If the FDP/DD ratio falls outside the 95% CI, it should be verified by different methods.

New method for determining fibrinogen and FDP threshold criteria by artificial intelligence in cases of massive hemorrhage during delivery.

AIM: To investigate the feasibility of a novel method using artificial intelligence (AI), in which the fibrinogen criterion was determined by the quantitative relation between the distributions of fibrin/fibrinogen degradation products (FDPs) and fibrinogen. METHODS: A dataset of 154 deliveries comprising more than 2000 g of blood lost due to hemorrhage, excluding disseminated intravascular coagulation (DIC), among patients from eight national perinatal centers in Japan from 2011 to 2015 were obtained. The fibrinogen threshold criterion was identified by using the function that best fit the distributions of FDP as determined by AI. FDP production was described by differential equations using a dataset containing fibrinogen levels less than the fibrinogen criterion and solved numerically. RESULTS: A fibrinogen level of 237 mg/dL as the threshold criterion was obtained. The FDP threshold criteria were 2.0 and 8.5 mg/dL for no coagulopathy and a failed coagulation system, respectively. CONCLUSION: The fibrinogen threshold criterion for patients with massive hemorrhage excluding DIC at delivery were obtained by selecting the functions that best fit the distributions of FDP data by using AI.

Plasma Fibrinogen Performs Better Than Plasma d-Dimer and Fibrin Degradation Product in the Diagnosis of Periprosthetic Joint Infection and Determination of Reimplantation Timing.

BACKGROUND: The accurate and timely diagnosis of periprosthetic joint infection (PJI) is challenging, and no single biomarker can definitively confirm infection before revision arthroplasty. The coagulation cascade has been linked closely to infection. This study was performed to determine the value of plasma d-dimer, plasma fibrinogen, and plasma fibrin degradation product (FDP) for the diagnosis of PJI and timing of reimplantation. METHODS: We retrospectively enrolled 136 patients who underwent revision surgery from January 2008 to December 2019. They were assigned to 3 groups: aseptic failure (group A), PJI (group B), and reimplantation (group C). Receiver operating characteristic curves were constructed to estimate the value of plasma fibrinogen, plasma d-dimer, plasma FDP, erythrocyte sedimentation rate (ESR), and serum C-reactive protein (CRP) for PJI diagnosis and reimplantation timing. RESULTS: All biomarker levels were significantly higher in group B than in group A (P < .05), and plasma fibrinogen, CRP, and ESR values were significantly higher in group B than in group C (all P < .05). The receiver operating characteristic curves showed that the areas under the curve of plasma fibrinogen, plasma d-dimer, plasma FDP, CRP, and ESR were 0.848, 0.914, 0.728, 0.737, and 0.868, respectively, and the threshold values for plasma fibrinogen, plasma d-dimer, and plasma FDP were 3.61 g/L, 0.41 mg/L, and 3.55 mg/L, respectively. CONCLUSION: Plasma fibrinogen exhibits good value for the diagnosis of PJI and can be an indicator of residual infection before reimplantation in 2-stage arthroplasty. Plasma d-dimer and FDP are of limited value for PJI diagnosis and cannot be used to determine the timing of reimplantation.

Comparison of a Comprehensive Set of Fibrinolytic Markers With C-Reactive Protein and Erythrocyte Sedimentation Rate for the Diagnosis of Periprosthetic Joint Infection.

BACKGROUND: The diagnosis of periprosthetic joint infection (PJI), a serious complication after primary total joint arthroplasty, remains challenging. Recently, fibrinolytic activities have been shown to be closely related to infections and inflammation. However, data assessing the value of fibrinolytic markers for the diagnosis of PJI have been sparse until now. METHODS: We retrospectively enrolled 157 patients undergoing revision for aseptic loosening (n = 106, group A) or revision for chronic PJI (n = 51, group B) from January 2014 to August 2019. PJI was defined using the Musculoskeletal Infection Society criteria. Erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), D-dimer, fibrin degradation product (FDP), and fibrinogen were measured preoperatively. The diagnostic values of each biomarker were analyzed and compared using receiver operating characteristic curves, sensitivity, and specificity. RESULTS: Compared with group A, group B had significantly higher levels of CRP, ESR, D-dimer, FDP, and fibrinogen (P < .001). The area under the curve of fibrinogen was 0.914, which was slightly lower than that of CRP (0.924). FDP and D-dimer had area under the curve values of 0.808 and 0.784, respectively. The optimal threshold, sensitivity, and specificity were 3.56 g/L, 86.27%, and 83.96% for fibrinogen; 1.22 mg/L, 66.67%, and 85.85% for D-dimer; and 3.98 µg/mL, 72.55%, and 80.19% for FDP, respectively. CONCLUSION: Fibrinolytic markers provided promising diagnostic support for PJI, especially fibrinogen, which had a diagnostic efficiency similar to that of CRP and ESR.

Different stability-indicating chromatographic methods for specific determination of paracetamol, dantrolene sodium, their toxic impurities and degradation products.

A well-known analgesic (paracetamol, PAR) and skeletal muscle relaxant [dantrolene sodium (DNS)] have been analyzed without interference from their toxic impurities and degradation products. The studied PAR impurities are the genotoxic and nephrotoxic p-amino phenol (PAP) and the hepatotoxic and nephrotoxic chloroacetanilide, while 5-(4-nitrophenyl)-2-furaldehyde is reported to be a mutagenic and carcinogenic degradation product of DNS. The five studied components were determined and quantified by TLC-densitometric and RP-HPLC methods. TLC-densitometry (method 1) used TLC silica gel and chloroform-ethyl acetate-acetic acid-triethylamine (7:3:0.5:0.05, by volume) as the mobile phase with UV scanning at 230 nm, while RP-HPLC (method 2) was based on separation on a C18 column using methanol-water (55:45, v/v pH 3 with aqueous formic acid) as mobile phase at 1 mL/min and detection at 230 nm. The developed methods were used for determination and quantification of the five studied components in different laboratory-prepared mixtures. The were also applied for analysis of Dantrelax® compound capsules where no interference among the studied components with each other or from excipients was observed. The methods were validated as per International Conference on Harmonization guidelines, and they compared favorably with the reported ones.