Synthesis and Characterization of 2,2'-Dinitramino-5,5'-bi(1-oxa-3,4-diazole) and Derivatives as Economic and Highly Dense Energetic Materials.

2,2'-Dinitramino-5,5'-bi(1-oxa-3,4-diazole) (2) is a new highly energetic material with superior calculated detonation performance in comparison to cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) and penta-erythritoltetranitrate (PETN) and can be prepared by an economical and practical two-step synthesis. The starting material 2,2'-diamino-5,5'-bi(1-oxa-3,4-diazole) (1) is synthesized by the reaction of oxalyl dihydrazide with cyanogen bromide. Nitration of 1 yields the title compound in perfect yield and purity. The combination of its high density of 1.986 g cm-3 , the positive heat of formation (+190 kJ mol-1 ), and a slightly positive oxygen balance (+6.2 %) results in ideal calculated detonation parameters (e.g. detonation velocity 9296 m s-1 ). The sensitivities toward impact and friction can be adjusted by deprotonation and formation of corresponding nitrogen-rich salts, for example, ammonium (3), hydroxylammonium (4), and guanidinium (5) salts.

Protonation of Nitramines: Where Does the Proton Go?

The reactions of nitramine, N-methyl nitramine, and N,N-dimethyl nitramine with anhydrous HF and the superacids HF/MF5 (M=As, Sb) were investigated at temperatures below -40 °C. In solution, exclusive O-protonation was observed by multinuclear NMR spectroscopy. Whereas no solid product could be isolated from the neat HF solutions even at -78 °C, in the HF/MF5 systems, protonated nitramine MF6- salts were isolated for the first time as moisture-sensitive solids that decompose at temperatures above -40 °C. In the solid state, depending on the counterion, O-protonated or N-protonated cations can be formed, in accord with theoretical calculations which show that the energy differences between O-protonation and N-protonation are very small. The salts [H2 N-NO2 H][AsF6 ], [H3 N-NO2 ][SbF6 ], [MeHNNO2 H][SbF6 ], and [Me2 NNO2 H][SbF6 ] were characterized by their X-ray crystal structures.

1,1'-Nitramino-5,5'-bitetrazoles.

1,1'-Dinitramino-5,5'-bitetrazole and 1,1'-dinitramino-5,5'-azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen-rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low-temperature X-ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS-4M) heats of formation and X-ray densities support the high performances of the 1,1'-dinitramino-5,5'-bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!

Small Cation-Based High-Performance Energetic Nitraminofurazanates.

Large nitramino-substituted furazan anions were combined with small cations (hydroxylammonium, hydrazinium, and ammonium) to form a series of energetic salts that was fully characterized. The structures of several of the compounds (1 a, 2 a, 3 a, and 4 a) were further confirmed by single-crystal X-ray diffraction. Based on their physiochemical properties, such as density, thermal stability, and sensitivity, together with the calculated detonation properties, it was found that they exhibit good detonation performance and have potential application as high-energy-density materials.

Solid-phase extraction of explosive nitramines on macroreticular polymers modified by freezing with water or acetone.

A novel approach is proposed to modify the porous structure and surface properties of the polymers used in solid-phase extraction. The approach involves soaking in water or acetone, followed by freezing in liquid nitrogen (77.4 K) and was employed for two polymeric materials: Amberlite XAD-7 and Amberlite XAD-16. Variations in the surface properties of the adsorbents were justified by the action of acetone and water as solvents affecting the textural and other characteristic of the materials. The initial and treated adsorbents were used in extraction of explosive nitramines from aqueous samples. The performed modifications of the polymer texture allow us to increase the recovery rate as compared with the initial adsorbents. The results were justified by the swelling of fragments of the polymers and by the additional process of sorption of nitramines. The results indicate that polymeric adsorbents can be easily modified by the soaking/freezing process and the materials can be achieved that prove usefulness for the effective separation of explosive nitramines from aqueous samples.

Safe Synthesis of Alkylhydroxy and Alkylamino Nitramines.

Three different protocols for the syntheses of hydroxyalkylnitramines are presented and compared. Safety issues regarding the synthesis of nitramines are also discussed.

3,6-Dinitropyrazolo[4,3-c]pyrazole-Based Multipurpose Energetic Materials through Versatile N-Functionalization Strategies.

A family of 3,6-dinitropyrazolo[4,3-c]pyrazole-based energetic compounds was synthesized by using versatile N-functionalization strategies. Subsequently, nine ionic derivatives of the N,N'-(3,6-dinitropyrazolo[4,3-c]pyrazole-1,4-diyl)dinitramidate anion were prepared by acid-base reactions and fully characterized by infrared, multinuclear NMR spectra, and elemental analysis. The structures of four of these compounds were further confirmed by single-crystal X-ray diffraction. Based on their different physical and detonation properties, these compounds exhibit promising potential as modern energetic materials and can be variously classified as green primary explosives, high-performance secondary explosives, fuel-rich propellants, and propellant oxidizers.

New energetic polynitrotetrazoles.

This combined experimental, theoretical and comparative study details the syntheses and chemical characterisation of two new energetic polynitromethyl tetrazole derivatives, namely, 2-(2-nitro-2-azapropyl)-5-(trinitromethyl)-2 H-tetrazole and its fluorine-containing analogue 2-(2-nitro-2-azapropyl)-5-(fluorodinitromethyl)-2 H-tetrazole. Their crystal structures and energetic behaviour are compared to those of their starting materials, the ammonium salts of the corresponding 5-(polynitromethyl)-2 H-tetrazoles. Additionally, the crystal structures of two further related polynitrotetrazoles are presented.

Hazard assessment of nitrosamine and nitramine by-products of amine-based CCS: alternative approaches.

Carbon capture and storage (CCS) technologies are considered vital and economic elements for achieving global CO2 reduction targets, and is currently introduced worldwide (for more information on CCS, consult for example the websites of the International Energy Agency (http://www.iea.org/topics/ccs/) and the Global CCS Institute (http://www.globalccsinstitute.com/)). One prominent CCS technology, the amine-based post-combustion process, may generate nitrosamines and their related nitramines as by-products, the former well known for their potential mutagenic and carcinogenic properties. In order to efficiently assess the carcinogenic potency of any of these by-products this paper reviews and discusses novel prediction approaches consuming less time, money and animals than the traditionally applied 2-year rodent assay. For this, available animal carcinogenicity studies with N-nitroso compounds and nitramines have been used to derive carcinogenic potency values, that were subsequently used to assess the predictive performance of alternative prediction approaches for these chemicals. Promising cancer prediction models are the QSARs developed by the Helguera group, in vitro transformation assays, and the in vivo initiation-promotion, and transgenic animal assays. All these models, however, have not been adequately explored for this purpose, as the number of N-nitroso compounds investigated is yet too limited, and therefore further testing with relevant N-nitroso compounds is needed.

1,5-Di(nitramino)tetrazole: High Sensitivity and Superior Explosive Performance.

Highly energetic 1,5-di(nitramino)tetrazole and its salts were synthesized. The neutral compound is very sensitive and one of the most powerful non-nuclear explosives to date. Selected nitrogen-rich and metal salts were prepared. The potassium salt can be used as a sensitizer in place of tetracene. The obtained compounds were characterized by low-temperature X-ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS-4M) heats of formation and X-ray densities support the high energetic performances of the 1,5-dinitraminotetrazolates as energetic materials. The sensitivities towards impact, friction, and electrostatic discharge were also explored.

Dense energetic nitraminofurazanes.

3,3'-Diamino-4,4'-bifurazane (1), 3,3'-diaminoazo-4,4'-furazane (2), and 3,3'-diaminoazoxy-4,4'-furazane (3) were nitrated in 100 % HNO3 to give corresponding 3,3'-dinitramino-4,4'-bifurazane (4), 3,3'-dinitramino-4,4'-azofurazane (5) and 3,3'-dinitramino-4,4'-azoxyfurazane (6), respectively. The neutral compounds show very imposing explosive performance but possess lower thermal stability and higher sensitivity than hexogen (RDX). More than 40 nitrogen-rich compounds and metal salts were prepared. Most compounds were characterized by low-temperature X-ray diffraction, all of them by infrared and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and by differential scanning calorimetry (DSC). Calculated energetic performances using the EXPLO5 code based on calculated (CBS-4M) heats of formation and X-ray densities support the high energetic performances of the nitraminofurazanes as energetic materials. The sensitivities towards impact, friction, and electrostatic discharge were also explored. Additionally the general toxicity of the anions against vibrio fischeri, representative for an aquatic microorganism, was determined.

Genotoxic and mutagenic potential of nitramines.

Climate change is one of the major challenges in the world today. To reduce the amount of CO2 released into the atmosphere, CO2 at major sources, such as power plants, can be captured. Use of aqueous amine solutions is one of the most promising methods for this purpose. However, concerns have been raised regarding its impacts on human health and the environment due to the degradation products, such as nitrosamines and nitramines that may be produced during the CO2 capture process. While several toxicity studies have been performed investigating nitrosamines, little is known about the toxic potential of nitramines. In this study a preliminary screening was performed of the genotoxic and mutagenic potential of nitramines most likely produced during amine based CO2 capture; dimethylnitramine (DMA-NO2), methylnitramine (MA-NO2), ethanolnitramine (MEA-NO2), 2-methyl-2-(nitramino)-1-propanol (AMP-NO2) and piperazine nitramine (PZ-NO2), by the Bacterial Reverse Mutation (Ames) Test, the Cytokinesis Block Micronucleus (CBMN) Assay and the in vitro Single-Cell Gel Electrophoresis (Comet) Assay. MA-NO2 and MEA-NO2 showed mutagenic potential in the Ames test and a weak genotoxic response in the CBMN Assay. AMP-NO2 and PZ-NO2 significantly increased the amount of DNA strand breaks; however, the level of breaks was below background. Most previous studies on nitramines have been performed on DMA-NO2, which in this study appeared to be the least potent nitramine. Our results indicate that it is important to investigate other nitramines that are more likely to be produced during CO2 capture, to ensure that the risk is realistically evaluated.

Human health risk assessment of nitrosamines and nitramines for potential application in CO2 capture.

Emission and accumulation of carbon dioxide (CO2) in the atmosphere exert an environmental and climate change challenge. An attempt to deal with this challenge is made at Mongstad by application of amines for CO2 capture and storage (CO2 capture Mongstad (CCM) project). As part of the CO2 capture process, nitrosamines and nitramines may be emitted. Toxicological testing of nitrosamines and nitramines indicate a genotoxic potential of these substances. Here we present a risk characterization and assessment for five nitrosamines (N-Nitrosodi-methylamine (NDMA) N-Nitrosodi-ethylamine (NDEA), N-Nitroso-morpholine (NNM), N-Nitroso-piperidine (NPIP), and Dinitroso-piperazine (DNP)) and two nitramines (N-Methyl-nitramine (NTMA), Dimethyl-nitramine (NDTMA)), which are potentially emitted from the CO2 capture plant (CCP). Human health risk assessment of genotoxic non-threshold substances is a heavily debated topic, and no consensus methodology exists internationally. Extrapolation modeling from high-dose animal exposures to low-dose human exposures can be crucial for the final risk calculation. In the work presented here, different extrapolation models are discussed, and suggestions on applications are given. Then, preferred methods for calculating derived minimal effect level (DMEL) are presented with the selected nitrosamines and nitramines.

Contribution of liquid water content enhancing aqueous phase reaction forming ambient particulate nitrosamines.

Contribution of liquid water content (LWC) to the levels of the carcinogenic particulate nitro(so) compounds and the chemistry affecting LWC were investigated based on the observation of seven nitrosamines and two nitramines in rural (Seosan) and urban (Seoul) area in South Korea during October 2019 and a model simulation. The concentrations of both the total nitrosamines and nitramines were higher in Seosan (12.48 ± 16.12 ng/m3 and 0.65 ± 0.71 ng/m3, respectively) than Seoul (7.41 ± 13.59 ng/m3 and 0.24 ± 0.15 ng/m3, respectively). The estimated LWC using a thermodynamic model in Seosan (12.92 ± 9.77 µg/m3) was higher than that in Seoul (6.20 ± 5.35 µg/m3) mainly due to higher relative humidity (75 ± 9% (Seosan); 62 ± 10% (Seoul)) and higher concentrations of free ammonia (0.13 ± 0.09 µmol/m3 (Seosan); 0.08 ± 0.01 µmol/m3 (Seoul)) and total nitric acid (0.09 ± 0.07 µmol/m3 (Seosan); 0.04 ± 0.02 µmol/m3 (Seoul)) in Seosan while neither fog nor rain occurred during the sampling period. The relatively high concentrations of the particulate nitrosamines (>30 ng/m3) only observed probably due to the higher LWC (>10 µg/m3) in Seosan. It implies that aqueous phase reactions involving NO2 and/or uptake from the gas phase enhanced by LWC could be promoted in Seosan. Strong correlation between the concentrations of nitrosodi-methylamine (NDMA), an example of nitrosamines, simulated by a kinetic box model including the aqueous phase reactions and the measured concentration of NDMA in Seosan (R = 0.77; 0.37 (Seoul)) indicates that the aqueous phase reactions dominantly enhanced the NDMA concentrations in Seosan. On the other hand, it is estimated that the formation of nitrosamines by aqueous phase reaction was not significant due to the relatively lower LWC in Seoul compared to that in Seosan. Furthermore, it is presumed that nitramines are mostly emitted from the primary emission sources. This study implies that the concentration of the particulate nitrosamines can be promoted by aqueous phase reaction enhanced by LWC.

Investigation of 1,4-Substituted 1,2,3-Triazole Derivatives as Antiarrhythmics: Synthesis, Structure, and Properties.

Here, we investigated the reaction of 1,3-dipolar cycloaddition of 1,3-diazido-2-nitro-2- azapropane (DANP) to propargyl alcohol over a copper-based catalyst and identified the optimum reaction conditions that enable the synthesis of 2-nitro-1,3-bis(4,4'-dihydroxymethyl)-1,2,3-triazolyl-2-azapropane (1) in more than 84% yield. The reaction between DANP, 1,5-diazido-3-nitrazapentane, and phenylacetylene produced the respective 1,2,3-triazole derivatives in 83% and 71% yields, respectively. The structures of the resultant compounds were validated by infrared and NMR spectroscopies and elemental analysis. The structure of 1 was proved by single-crystal X-ray diffraction. This study demonstrated that 1 exhibits a dose-dependent antiarrhythmic activity towards calcium-chloride-induced arrhythmia and refers to Class III: moderately hazardous substances.

An Efficient Synthesis and Preliminary Investigation of Novel 1,3-Dihydro-2H-benzimidazol-2-one Nitro and Nitramino Derivatives.

The preparation and properties of a series of novel 1,3-dihydro-2H-benzimidazol-2-one nitro and nitramino derivatives are described. A detailed crystal structure of one of the obtained compounds, 4,5,6-trinitro-1,3-dihydro-2H-benzimidazol-2-one (TriNBO), was characterized using low temperature single crystal X-ray diffraction, namely an orthorhombic yellow prism, space group 'P 2 21 21', experimental crystal density 1.767 g/cm3 (at 173 K). Methyl analog, 5-Me-TriNBO-monoclinic red plates, space group, P 21/c, crystal density 1.82 g/cm3. TriNBO contains one activated nitro group at the fifth position, which was used for the nucleophilic substitution in the aminolysis reactions with three monoalkylamines (R=CH3, C2H5, (CH2)2CH3) and ethanolamine. The 5-R-aminoderivatives were further nitrated with N2O5/ HNO3 and resulted in a new group of appropriate nitramines: 1,3-dihydro-2H-5-R-N(NO2)-4,6-dinitrobenzimidazol-2-ones. Thermal analysis (TGA) of three selected representatives was performed. The new compounds possess a high melting point (200-315 °C) and thermal stability and can find a potential application as new thermostable energetic materials. Some calculated preliminary energetic characteristics show that TriNBO, 5-Me-TriNBO, 5-methylnitramino-1,3-dihydro-2H-4,6-dinitrobenzimidazol-2-one, and 5-nitratoethylnitramino-1,3-dihydro-2H-4,6-dinitrobenzimidazol-2-one possess increased energetic characteristics in comparison with TNT and tetryl. The proposed nitrocompounds may find potential applications as thermostable high-energy materials.

A theoretical investigation on the degradation reactions of CH3CH2CH2NH and (CH3CH2CH2)2N radicals in the presence of NO, NO2 and O2.

The degradation reactions of propylamino and dipropylamino radicals in the presence of NO, NO2 and O2 were investigated at the CCSD(T)/6-311++G (2d, 2p)//B3LYP/6-311++G (d,p) levels of theory. Result indicates that nitrosamines, nitramines, nitroso-oxy compounds and imines can be formed at atmosphere. Time dependent density functional theory (TDDFT) calculation shows that nitrosamines and nitroso-oxy compounds can photolyze under sunlight, while nitramines cannot undergo photolysis in the daytime. Moreover, the ecotoxicity assessment result implies that the degradation of propyl-substituted amines by OH radicals, NO and NO2 will reduce their toxicity to fish, daphnia and green algae in the aquatic environment.

Modelling atmospheric oxidation of 2-aminoethanol (MEA) emitted from post-combustion capture using WRF-Chem.

Carbon capture and storage (CCS) is a technological solution that can reduce the amount of carbon dioxide (CO2) emissions from the use of fossil fuel in power plants and other industries. A leading method today is amine based post-combustion capture, in which 2-aminoethanol (MEA) is one of the most studied absorption solvents. In this process, amines are released to the atmosphere through evaporation and entrainment from the CO2 absorber column. Modelling is a key instrument for simulating the atmospheric dispersion and chemical transformation of MEA, and for projections of ground-level air concentrations and deposition rates. In this study, the Weather Research and Forecasting model inline coupled with chemistry, WRF-Chem, was applied to quantify the impact of using a comprehensive MEA photo-oxidation sequence compared to using a simplified MEA scheme. Main discrepancies were found for iminoethanol (roughly doubled in the detailed scheme) and 2-nitro aminoethanol, short MEA-nitramine (reduced by factor of two in the detailed scheme). The study indicates that MEA emissions from a full-scale capture plant can modify regional background levels of isocyanic acid. Predicted atmospheric concentrations of isocyanic acid were however below the limit value of 1 ppbv for ambient exposure. The dependence of the formation of hazardous compounds in the OH-initiated oxidation of MEA on ambient level of nitrogen oxides (NOx) was studied in a scenario without NOx emissions from a refinery area in the vicinity of the capture plant. Hourly MEA-nitramine peak concentrations higher than 40 pg m(-3) did only occur when NOx mixing ratios were above 2 ppbv. Therefore, the spatial variability and temporal variability of levels of OH and NOx need to be taken into account in the health risk assessment. The health risk due to direct emissions of nitrosamines and nitramines from full-scale CO2 capture should be investigated in future studies.

Amines and amine-related compounds in surface waters: a review of sources, concentrations and aquatic toxicity.

This review compiles available information on the concentrations, sources, fate and toxicity of amines and amine-related compounds in surface waters, including rivers, lakes, reservoirs, wetlands and seawater. There is a strong need for this information, especially given the emergence of amine-based post-combustion CO2 capture technologies, which may represent a new and significant source of amines to the environment. We identify a broad range of anthropogenic and natural sources of amines, nitrosamines and nitramines to the aquatic environment, and identify some key fate and degradation pathways of these compounds. There were very few data available on amines in surface waters, with reported concentrations often below detection and only rarely exceeding 10 µg/L. Reported concentrations for seawater and reservoirs were below detection or very low, while for lakes and rivers, concentrations spanned several orders of magnitude. The most prevalent and commonly detected amines were methylamine (MA), dimethylamine (DMA), ethylamine (EA), diethylamine (DEA) and monoethanolamine (MEAT). The paucity of data may reflect the analytical challenges posed by determination of amines in complex environmental matrices at ambient levels. We provide an overview of available aquatic toxicological data for amines and conclude that at current environmental concentrations, amines are not likely to be of toxicological concern to the aquatic environment, however, the potential for amines to act as precursors in the formation of nitrosamines and nitramines may represent a risk of contamination of drinking water supplies by these often carcinogenic compounds. More research on the prevalence and toxicity of amines, nitrosamines and nitramines in natural waters is necessary before the environmental impact of new point sources from carbon capture facilities can be adequately quantified.

Surface-Accelerated Decomposition of δ-HMX.

Despite extensive efforts to study the explosive decomposition of HMX, a cyclic nitramine widely used as a solid fuel, explosive, and propellant, an understanding of the physicochemical processes, governing the sensitivity of condensed HMX to detonation initiation is not yet achieved. Experimental and theoretical explorations of the initiation of chemistry are equally challenging because of many complex parallel processes, including the ß-δ phase transition and the decomposition from both phases. Among four known polymorphs, HMX is produced in the most stable ß-phase, which transforms into the most reactive δ-phase under heat or pressure. In this study, the homolytic NO2 loss and HONO elimination precursor reactions of the gas-phase, ideal crystal, and the (100) surface of δ-HMX are explored by first principles modeling. Our calculations revealed that the high sensitivity of δ-HMX is attributed to interactions of surfaces and molecular dipole moments. While both decomposition reactions coexist, the exothermic HONO-isomer formation catalyzes the N-NO2 homolysis, leading to fast violent explosions.