Enhancing PET Degrading Enzymes: A Combinatory Approach.

Plastic waste has become a substantial environmental issue. A potential strategy to mitigate this problem is to use enzymatic hydrolysis of plastics to depolymerize post-consumer waste and allow it to be reused. Over the last few decades, the use of enzymatic PET-degrading enzymes has shown promise as a great solution for creating a circular plastic waste economy. PsPETase from Piscinibacter sakaiensis has been identified as an enzyme with tremendous potential for such applications. But to improve its efficiency, enzyme engineering has been applied aiming at enhancing its thermal stability, enzymatic activity, and ease of production. Here, we combine different strategies such as structure-based rational design, ancestral sequence reconstruction and machine learning to engineer a more highly active Combi-PETase variant with a melting temperature of 70 °C and optimal performance at 60 °C. Furthermore, this study demonstrates that these approaches, commonly used in other works of enzyme engineering, are most effective when utilized in combination, enabling the improvement of enzymes for industrial applications.

The unique salt bridge network in GlacPETase: a key to its stability.

The extensive accumulation of polyethylene terephthalate (PET) has become a critical environmental issue. PET hydrolases can break down PET into its building blocks. Recently, we identified a glacial PET hydrolase GlacPETase sharing less than 31% amino acid identity with any known PET hydrolases. In this study, the crystal structure of GlacPETase was determined at 1.8 Å resolution, revealing unique structural features including a distinctive N-terminal disulfide bond and a specific salt bridge network. Site-directed mutagenesis demonstrated that the disruption of the N-terminal disulfide bond did not reduce GlacPETase's thermostability or its catalytic activity on PET. However, mutations in the salt bridges resulted in changes in melting temperature ranging from -8°C to +2°C and the activity on PET ranging from 17.5% to 145.5% compared to the wild type. Molecular dynamics simulations revealed that these salt bridges stabilized the GlacPETase's structure by maintaining their surrounding structure. Phylogenetic analysis indicated that GlacPETase represented a distinct branch within PET hydrolases-like proteins, with the salt bridges and disulfide bonds in this branch being relatively conserved. This research contributed to the improvement of our comprehension of the structural mechanisms that dictate the thermostability of PET hydrolases, highlighting the diverse characteristics and adaptability observed within PET hydrolases.IMPORTANCEThe pervasive problem of polyethylene terephthalate (PET) pollution in various terrestrial and marine environments is widely acknowledged and continues to escalate. PET hydrolases, such as GlacPETase in this study, offered a solution for breaking down PET. Its unique origin and less than 31% identity with any known PET hydrolases have driven us to resolve its structure. Here, we report the correlation between its unique structure and biochemical properties, focusing on an N-terminal disulfide bond and specific salt bridges. Through site-directed mutagenesis experiments and molecular dynamics simulations, the roles of the N-terminal disulfide bond and salt bridges were elucidated in GlacPETase. This research enhanced our understanding of the role of salt bridges in the thermostability of PET hydrolases, providing a valuable reference for the future engineering of PET hydrolases.

Engineered polyethylene terephthalate hydrolases: perspectives and limits.

Polyethylene terephthalate (PET) is a major component of plastic waste. Enzymatic PET hydrolysis is the most ecofriendly recycling technology. The biorecycling of PET waste requires the complete depolymerization of PET to terephthalate and ethylene glycol. The history of enzymatic PET depolymerization has revealed two critical issues for the industrial depolymerization of PET: industrially available PET hydrolases and pretreatment of PET waste to make it susceptible to full enzymatic hydrolysis. As none of the wild-type enzymes can satisfy the requirements for industrialization, various mutational improvements have been performed, through classical technology to state-of-the-art computational/machine-learning technology. Recent engineering studies on PET hydrolases have brought a new insight that flexibility of the substrate-binding groove may improve the efficiency of PET hydrolysis while maintaining sufficient thermostability, although the previous studies focused only on enzymatic thermostability above the glass transition temperature of PET. Industrial biorecycling of PET waste is scheduled to be implemented, using micronized amorphous PET. Next stage must be the development of PET hydrolases that can efficiently degrade crystalline parts of PET and expansion of target PET materials, not only bottles but also textiles, packages, and microplastics. This review discusses the current status of PET hydrolases, their potential applications, and their profespectal goals. KEY POINTS: • PET hydrolases must be thermophilic, but their operation must be below 70 °C • Classical and state-of-the-art engineering approaches are useful for PET hydrolases • Enzyme activity on crystalline PET is most expected for future PET biorecycling.

Insights into molecular mechanism of plasticizer biodegradation in Dietzia kunjamensis IITR165 and Brucella intermedia IITR166 isolated from a solid waste dumpsite.

AIMS: Isolation of phthalate esters (PAEs) degrading bacteria from a solid waste dumpsite could degrade many plasticizers efficiently and to investigate their degrading kinetics, pathways, and genes. METHODS AND RESULTS: Based on their 16S rRNA gene sequence the strains were identified as Dietzia kunjamensis IITR165 and Brucella intermedia IITR166, which showed a first-order degradation kinetic model under lab conditions. The quantification of phthalates and their intermediate metabolites identification were done by using ultra-high-performance liquid chromatography (UHPLC) and gas chromatography-tandem mass-spectrometry (GC-MS/MS), respectively. Both the bacteria utilized >99% dibutyl phthalate at a high concentration of 100-400 mg L-1 within 192 h as monitored by UHPLC. GC-MS/MS revealed the presence of metabolites dimethyl phthalate (DMP), phthalic acid (PA), and benzoic acid (BA) during DBP degradation by IITR165 while monobutyl phthalate (MBP) and PA were identified in IITR166. Phthalate esters degrading gene cluster in IITR165 comprised two novel genes coding for carboxylesterase (dkca1) and mono-alkyl phthalate hydrolase (maph), having only 37.47% and 47.74% homology, respectively, with reported phthalate degradation genes, along with the terephthalate dioxygenase system (tphA1, A2, A3, and B). However, IITR166 harbored different gene clusters comprising di-alkyl phthalate hydrolase (dph_bi), and phthalate dioxygenase (ophA, B, and C) genes. CONCLUSIONS: Two novel bacterial strains, Dietzia kunjamensis IITR165 and Brucella intermedia IITR166, were isolated and found to efficiently degrade DBP at high concentrations. The degradation followed first-order kinetics, and both strains exhibited a removal efficiency of over 99%. Metabolite analysis revealed that both bacteria utilized de-methylation, de-esterification, and decarboxylation steps during degradation.

Structure-function analysis of two closely related cutinases from Thermobifida cellulosilytica.

Cutinases can play a significant role in a biotechnology-based circular economy. However, relatively little is known about the structure-function relationship of these enzymes, knowledge that is vital to advance optimized, engineered enzyme candidates. Here, two almost identical cutinases from Thermobifida cellulosilytica DSM44535 (Thc_Cut1 and Thc_Cut2) with only 18 amino acids difference were used for a rigorous biochemical characterization of their ability to hydrolyze poly(ethylene terephthalate) (PET), PET-model substrates, and cutin-model substrates. Kinetic parameters were compared with detailed in silico docking studies of enzyme-ligand interactions. The two enzymes interacted with, and hydrolyzed PET differently, with Thc_Cut1 generating smaller PET-degradation products. Thc_Cut1 also showed higher catalytic efficiency on long-chain aliphatic substrates, an effect likely caused by small changes in the binding architecture. Thc_Cut2, in contrast, showed improved binding and catalytic efficiency when approaching the glass transition temperature of PET, an effect likely caused by longer amino acid residues in one area at the enzyme's surface. Finally, the position of the single residue Q93 close to the active site, rotated out in Thc_Cut2, influenced the ligand position of a trimeric PET-model substrate. In conclusion, we illustrate that even minor sequence differences in cutinases can affect their substrate binding, substrate specificity, and catalytic efficiency drastically.

Towards synthetic PETtrophy: Engineering Pseudomonas putida for concurrent polyethylene terephthalate (PET) monomer metabolism and PET hydrolase expression.

BACKGROUND: Biocatalysis offers a promising path for plastic waste management and valorization, especially for hydrolysable plastics such as polyethylene terephthalate (PET). Microbial whole-cell biocatalysts for simultaneous PET degradation and growth on PET monomers would offer a one-step solution toward PET recycling or upcycling. We set out to engineer the industry-proven bacterium Pseudomonas putida for (i) metabolism of PET monomers as sole carbon sources, and (ii) efficient extracellular expression of PET hydrolases. We pursued this approach for both PET and the related polyester polybutylene adipate co-terephthalate (PBAT), aiming to learn about the determinants and potential applications of bacterial polyester-degrading biocatalysts. RESULTS: P. putida was engineered to metabolize the PET and PBAT monomer terephthalic acid (TA) through genomic integration of four tphII operon genes from Comamonas sp. E6. Efficient cellular TA uptake was enabled by a point mutation in the native P. putida membrane transporter MhpT. Metabolism of the PET and PBAT monomers ethylene glycol and 1,4-butanediol was achieved through adaptive laboratory evolution. We then used fast design-build-test-learn cycles to engineer extracellular PET hydrolase expression, including tests of (i) the three PET hydrolases LCC, HiC, and IsPETase; (ii) genomic versus plasmid-based expression, using expression plasmids with high, medium, and low cellular copy number; (iii) three different promoter systems; (iv) three membrane anchor proteins for PET hydrolase cell surface display; and (v) a 30-mer signal peptide library for PET hydrolase secretion. PET hydrolase surface display and secretion was successfully engineered but often resulted in host cell fitness costs, which could be mitigated by promoter choice and altering construct copy number. Plastic biodegradation assays with the best PET hydrolase expression constructs genomically integrated into our monomer-metabolizing P. putida strains resulted in various degrees of plastic depolymerization, although self-sustaining bacterial growth remained elusive. CONCLUSION: Our results show that balancing extracellular PET hydrolase expression with cellular fitness under nutrient-limiting conditions is a challenge. The precise knowledge of such bottlenecks, together with the vast array of PET hydrolase expression tools generated and tested here, may serve as a baseline for future efforts to engineer P. putida or other bacterial hosts towards becoming efficient whole-cell polyester-degrading biocatalysts.

Comparative Biochemistry of Four Polyester (PET) Hydrolases*.

The potential of bioprocessing in a circular plastic economy has strongly stimulated research into the enzymatic degradation of different synthetic polymers. Particular interest has been devoted to the commonly used polyester, poly(ethylene terephthalate) (PET), and a number of PET hydrolases have been described. However, a kinetic framework for comparisons of PET hydrolases (or other plastic-degrading enzymes) acting on the insoluble substrate has not been established. Herein, we propose such a framework, which we have tested against kinetic measurements for four PET hydrolases. The analysis provided values of kcat and KM , as well as an apparent specificity constant in the conventional units of M-1 s-1 . These parameters, together with experimental values for the number of enzyme attack sites on the PET surface, enabled comparative analyses. A variant of the PET hydrolase from Ideonella sakaiensis was the most efficient enzyme at ambient conditions; it relied on a high kcat rather than a low KM . Moreover, both soluble and insoluble PET fragments were consistently hydrolyzed much faster than intact PET. This suggests that interactions between polymer strands slow down PET degradation, whereas the chemical steps of catalysis and the low accessibility associated with solid substrate were less important for the overall rate. Finally, the investigated enzymes showed a remarkable substrate affinity, and reached half the saturation rate on PET when the concentration of attack sites in the suspension was only about 50 nM. We propose that this is linked to nonspecific adsorption, which promotes the nearness of enzyme and attack sites.

Development of a Targeted Gene Disruption System in the Poly(Ethylene Terephthalate)-Degrading Bacterium Ideonella sakaiensis and Its Applications to PETase and MHETase Genes.

Poly(ethylene terephthalate) (PET) is a commonly used synthetic plastic; however, its nonbiodegradability results in a large amount of waste accumulation that has a negative impact on the environment. Recently, a PET-degrading bacterium, Ideonella sakaiensis 201-F6 strain, was isolated, and the enzymes involved in PET digestion, PET hydrolase (PETase), and mono(2-hydroxyethyl) terephthalic acid (MHET) hydrolase (MHETase) were identified. Despite the great potentials of I. sakaiensis in bioremediation and biorecycling, approaches to studying this bacterium remain limited. In this study, to enable the functional analysis of PETase and MHETase genes in vivo, we have developed a gene disruption system in I. sakaiensis. The pT18mobsacB-based disruption vector harboring directly connected 5'- and 3'-flanking regions of the target gene for homologous recombination was introduced into I. sakaiensis cells via conjugation. First, we deleted the orotidine 5'-phosphate decarboxylase gene (pyrF) from the genome of the wild-type strain, producing the ΔpyrF strain with 5-fluoroorotic acid (5-FOA) resistance. Next, using the ΔpyrF strain as a parent strain and pyrF as a counterselection marker, we disrupted the genes for PETase and MHETase. The growth of both Δpetase and Δmhetase strains on terephthalic acid (TPA; one of the PET hydrolytic products) was comparable to that of the parent strain. However, these mutant strains dramatically decreased the growth level on PET to that on a no-carbon source. Moreover, the Δpetase strain completely abolished PET degradation capacity. These results demonstrate that PETase and MHETase are essential for I. sakaiensis metabolism of PET. IMPORTANCE The poly(ethylene terephthalate) (PET)-degrading bacterium Ideonella sakaiensis possesses two unique enzymes able to serve in PET hydrolysis. PET hydrolase (PETase) hydrolyzes PET into mono(2-hydroxyethyl) terephthalic acid (MHET), and MHET hydrolase (MHETase) hydrolyzes MHET into terephthalic acid (TPA) and ethylene glycol (EG). These enzymes have attracted global attention, as they have potential to be used for bioconversion of PET. Compared to many in vitro studies, including biochemical and crystal structure analyses, few in vivo studies have been reported. Here, we developed a targeted gene disruption system in I. sakaiensis, which was then applied for constructing Δpetase and Δmhetase strains. Growth of these disruptants revealed that PETase is the sole enzyme responsible for PET degradation in I. sakaiensis, while PETase and MHETase play essential roles in its PET assimilation.

A suspension-based assay and comparative detection methods for characterization of polyethylene terephthalate hydrolases.

Enzymatic breakdown of plastic has emerged as a promising green technology, and its implementation will require assays that are accurate, reliable and convenient. Here, we assess two principles to monitor the hydrolysis of the common polyester, polyethylene terephthalate (PET). Hydrolysis of PET gives rise to heterogeneous products of different sizes and solubility, and as a result, specific experimental methods detect different activity levels. To avoid errors and to get a thorough picture of enzyme reactions, it is beneficial to combine several detection techniques. The two methods described herein are quantitative and complementary, and detect respectively the amount of soluble aromatic products and the formation of the constitutive aromatic monomers. A combined quantification approach identifies pitfalls in the characterization of these enzymes and provides mechanistic insight, but for screening and/or comparative studies of PET hydrolases we recommend a plate reader-based assay with suspended PET powder. This assay is rapid and simple, but still provides a good measure of the initial rates, which may be used in comparative biochemical analyses of these enzymes.

Functional expression of polyethylene terephthalate-degrading enzyme (PETase) in green microalgae.

BACKGROUND: For decades, plastic has been a valuable global product due to its convenience and low price. For example, polyethylene terephthalate (PET) was one of the most popular materials for disposable bottles due to its beneficial properties, namely impact resistance, high clarity, and light weight. Increasing demand of plastic resulted in indiscriminate disposal by consumers, causing severe accumulation of plastic wastes. Because of this, scientists have made great efforts to find a way to biologically treat plastic wastes. As a result, a novel plastic degradation enzyme, PETase, which can hydrolyze PET, was discovered in Ideonella sakaiensis 201-F6 in 2016. RESULTS: A green algae, Chlamydomonas reinhardtii, which produces PETase, was developed for this study. Two representative strains (C. reinhardtii CC-124 and CC-503) were examined, and we found that CC-124 could express PETase well. To verify the catalytic activity of PETase produced by C. reinhardtii, cell lysate of the transformant and PET samples were co-incubated at 30 °C for up to 4 weeks. After incubation, terephthalic acid (TPA), i.e. the fully-degraded form of PET, was detected by high performance liquid chromatography analysis. Additionally, morphological changes, such as holes and dents on the surface of PET film, were observed using scanning electron microscopy. CONCLUSIONS: A PET hydrolyzing enzyme, PETase, was successfully expressed in C. reinhardtii, and its catalytic activity was demonstrated. To the best of our knowledge, this is the first case of PETase expression in green algae.

Current knowledge on enzymatic PET degradation and its possible application to waste stream management and other fields.

Enzymatic hydrolysis of polyethylene terephthalate (PET) has been the subject of extensive previous research that can be grouped into two categories, viz. enzymatic surface modification of polyester fibers and management of PET waste by enzymatic hydrolysis. Different enzymes with rather specific properties are required for these two processes. Enzymatic surface modification is possible with several hydrolases, such as lipases, carboxylesterases, cutinases, and proteases. These enzymes should be designated as PET surface-modifying enzymes and should not degrade the building blocks of PET but should hydrolyze the surface polymer chain so that the intensity of PET is not weakened. Conversely, management of PET waste requires substantial degradation of the building blocks of PET; therefore, only a limited number of cutinases have been recognized as PET hydrolases since the first PET hydrolase was discovered by Müller et al. (Macromol Rapid Commun 26:1400-1405, 2005). Here, we introduce current knowledge on enzymatic degradation of PET with a focus on the key class of enzymes, PET hydrolases, pertaining to the definition of enzymatic requirements for PET hydrolysis, structural analyses of PET hydrolases, and the reaction mechanisms. This review gives a deep insight into the structural basis and dynamics of PET hydrolases based on the recent progress in X-ray crystallography. Based on the knowledge accumulated to date, we discuss the potential for PET hydrolysis applications, such as in designing waste stream management.

Enzymatic hydrolysis of PET: functional roles of three Ca2+ ions bound to a cutinase-like enzyme, Cut190*, and its engineering for improved activity.

Cut190 from Saccharomonospora viridis AHK190 (Cut190) is the only cutinase that exhibits inactive (Ca2+-free) and active (Ca2+-bound) states, although other homologous cutinases always maintain the active states (Ca2+-free and bound). The X-ray crystallography of the S176A mutant of Cut190* (Cut190_S226P/R228S) showed that three Ca2+ ions were bound at sites 1-3 of the mutant. We analyzed the roles of three Ca2+ ions by mutation and concluded that they play different roles in Cut190* for activation (sites 1 and 3) and structural and thermal stabilization (sites 2 and 3). Based on these analyses, we elucidated the mechanism for the conformational change from the Ca2+-free inactive state to the Ca2+-bound active state, proposing the novel Ca2+ effect on structural dynamics of protein. The introduction of a disulfide bond at Asp250 and Glu296 in site 2 remarkably increased the melting temperatures of the mutant enzymes by more than 20-30 °C (while Ca2+-bound) and 4-14 °C (while Ca2+-free), indicating that a disulfide bond mimics the Ca2+ effect. Replacement of surface asparagine and glutamine with aspartic acid, glutamic acid, or histidine increased the melting temperatures. Engineered mutant enzymes were evaluated by an increase in melting temperatures and kinetic values, based on the hydrolysis of poly(butylene succinate-co-adipate) and microfiber polyethylene terephthalate (PET). A combined mutation, Q138A/D250C-E296C/Q123H/N202H, resulted in the highest thermostability, leading to the maximum degradation of PET film (more than 30%; approximately threefold at 70 °C, compared with that of Cut190* at 63 °C).

Discovery and characterization of two novel polyethylene terephthalate hydrolases: One from a bacterium identified in human feces and one from the Streptomyces genus.

Polyethylene terephthalate (PET) is widely used for various industrial applications. However, owing to its extremely slow breakdown rate, PET accumulates as plastic trash, which negatively affects the environment and human health. Here, we report two novel PET hydrolases: PpPETase from Pseudomonas paralcaligenes MRCP1333, identified in human feces, and ScPETase from Streptomyces calvus DSM 41452. These two enzymes can decompose various PET materials, including semicrystalline PET powders (Cry-PET) and low-crystallinity PET films (gf-PET). By structure-guided engineering, two variants, PpPETaseY239R/F244G/Y250G and ScPETaseA212C/T249C/N195H/N243K were obtained that decompose Cry-PET 3.1- and 1.9-fold faster than their wild-type enzymes, respectively. The co-expression of ScPETase and mono-(2-hydroxyethyl) terephthalate hydrolase from Ideonella sakaiensis (IsMHETase) resulted in 1.4-fold more degradation than the single enzyme system. This engineered strain degraded Cry-PET and gf-PET by more than 40% and 6%, respectively, after 30 d. The concentrations of terephthalic acid (TPA) in the Cry-PET and gf-PET degradation products were 37.7% and 25.6%, respectively. The discovery of these two novel PET hydrolases provides opportunities to create more powerful biocatalysts for PET biodegradation.

Biochar immobilized hydrolase degrades PET microplastics and alleviates the disturbance of soil microbial function via modulating nitrogen and phosphorus cycles.

Microplastics (MPs) pose an emerging threat to soil ecological function, yet effective solutions remain limited. This study introduces a novel approach using magnetic biochar immobilized PET hydrolase (MB-LCC-FDS) to degrade soil polyethylene terephthalate microplastics (PET-MPs). MB-LCC-FDS exhibited a 1.68-fold increase in relative activity in aquatic solutions and maintained 58.5 % residual activity after five consecutive cycles. Soil microcosm experiment amended with MB-LCC-FDS observed a 29.6 % weight loss of PET-MPs, converting PET into mono(2-hydroxyethyl) terephthalate (MHET). The generated MHET can subsequently be metabolized by soil microbiota to release terephthalic acid. The introduction of MB-LCC-FDS shifted the functional composition of soil microbiota, increasing the relative abundances of Microbacteriaceae and Skermanella while reducing Arthobacter and Vicinamibacteraceae. Metagenomic analysis revealed that MB-LCC-FDS enhanced nitrogen fixation, P-uptake and transport, and organic-P mineralization in PET-MPs contaminated soil, while weakening the denitrification and nitrification. Structural equation model indicated that changes in soil total carbon and Simpson index, induced by MB-LCC-FDS, were the driving factors for soil carbon and nitrogen transformation. Overall, this study highlights the synergistic role of magnetic biochar-immobilized PET hydrolase and soil microbiota in degrading soil PET-MPs, and enhances our understanding of the microbiome and functional gene responses to PET-MPs and MB-LCC-FDS in soil systems.

Comparative biochemistry of PET hydrolase-carbohydrate-binding module fusion enzymes on a variety of PET substrates.

Enzyme-driven recycling of PET has now become a fully developed industrial process. With the right pre-treatment, PET can be completely depolymerized within workable timeframes. This has been realized due to extensive research conducted over the past decade, resulting in a large set of engineered PET hydrolases. Among various engineering strategies to enhance PET hydrolases, fusion with binding domains has been used to tune affinity and boost activity of the enzymes. While fusion enzymes have demonstrated higher activity in many cases, these results are primarily observed under conditions that would not be economically viable at scale. Furthermore, the wide variation in PET substrates, conditions, and combinations of PET hydrolases and binding domains complicates direct comparisons. Here, we present a self-consistent and thorough analysis of two leading PET hydrolases, LCCICCG and PHL7. Both enzymes were evaluated both without and with a substrate-binding domain across a range of industrially relevant PET substrates. We demonstrate that the presence of a substrate-binding module does not significantly affect the affinity of LCCICCG and PHL7 for PET. However, significant differences exist in how the fusion enzymes act on different PET substrates and solid substrate loading, ranging from a 3-fold increase in activity to a 6-fold decrease. These findings could inform the tailoring of enzyme choice to different industrial scenarios.

Relationships of crystallinity and reaction rates for enzymatic degradation of poly (ethylene terephthalate), PET.

Biocatalytic degradation of plastic waste is anticipated to play an important role in future recycling systems. However, enzymatic degradation of crystalline poly (ethylene terephthalate) (PET) remains consistently poor. Herein, we employed functional assays to elucidate the molecular underpinnings of this limitation. This included utilizing complementary activity assays to monitor the degradation of PET disks with varying crystallinity (XC), as well as determining enzymatic kinetic parameters for soluble PET fragments. The results indicate that an efficient PET-hydrolase, LCCICCG, operates through an endolytic mode of action, and that its activity is limited by conformational constraints in the PET polymer. Such constraints become more pronounced at high XC values, and this limits the density of productive sites on the PET surface. Endolytic chain-scissions are the dominant reaction type in the initial stage, and this means that little or no soluble organic product are released. However, endolytic cuts gradually and locally promote chain mobility and hence the density of attack sites on the surface. This leads to an upward concave progress curve; a behavior sometimes termed lag-phase kinetics.

[Detection methods for polyethylene terephthalate degrading enzymes: a review].

Polyethylene terephthalate (PET) is one of the most widely used synthetic polyester. It poses serious threat to terrestrial, aquatic ecosystems and human health since it is difficult to be broken down and deposited in the environment. The biodegradation based on enzymatic catalysis offers a sustainable method for recycling PET. A number of PET hydrolases have been discovered in the last 20 years, and protein engineering has increased their degradation capabilities. However, no PET hydrolases that are practical for widespread industrial use have been identified. Screening of PET hydrolase using conventional detection techniques is laborious and inefficient process. Effective detection techniques are required to promote the commercialization of PET hydrolases. Using efficient detection techniques to screen potent industrial enzymes is essential for supporting the widespread industrial implementation of PET hydrolases. To define PET hydrolase, scientists have created a number of analytical techniques recently. The detection techniques that can be used to screen PET hydrolase, including high performance liquid chromatography, ultraviolet absorption spectrometric, and fluorescence activated droplet sorting method, are summarized in this study along with their potential applications.

Three-directional engineering of IsPETase with enhanced protein yield, activity, and durability.

The mesophilic PETase from Ideonella sakaiensis (IsPETase) has been shown to exhibit high PET hydrolysis activity, but its low stability limits its industrial applications. Here, we developed a variant, Z1-PETase, with enhanced soluble protein yield and durability while maintaining or improving activity at lower temperatures. The selected Z1-PETase not only exhibited a 20-fold improvement in soluble protein yield compared to the previously engineered IsPETaseS121E/D186H/S242T/N246D (4p) variant, but also demonstrated a 30% increase in low-temperature activity at 40 °C, along with an 11 °C increase in its TmD value. The PET depolymerization test across a temperature range low to high (30-70 °C) confirmed that Z1-PETase exhibits high accessibility of mesophilic PET hydrolase and rapid depolymerizing rate at higher temperature in accordance with the thermal behaviors of polymer and enzyme. Additionally, structural interpretation indicated that the stabilization of specific active site loops in Z1-PETase contributes to enhanced thermostability without adversely impacting enzymatic activity. In a pH-stat bioreactor, Z1-PETase depolymerized > 90% of both transparent and colored post-consumer PET powders within 24 and 8 h at 40 °C and 55 °C, respectively, demonstrating that the utility of this IsPETase variant in the bio-recycling of PET.

A Dual Fluorescence Assay Enables High-Throughput Screening for Poly(ethylene terephthalate) Hydrolases.

The drastically increasing consumption of petroleum-derived plastics hasserious environmental impacts and raises public concerns. Poly(ethylene terephthalate) (PET) is amongst the most extensively produced synthetic polymers. Enzymatic hydrolysis of PET recently emerged as an enticing path for plastic degradation and recycling. In-lab directed evolution has revealed the great potential of PET hydrolases (PETases). However, the time-consuming and laborious PETase assays hinder the identification of effective variants in large mutant libraries. Herein, we devise and validate a dual fluorescence-based high-throughput screening (HTS) assay for a representative IsPETase. The two-round HTS of a pilot library consisting of 2850 IsPETase variants yields six mutant IsPETases with 1.3-4.9 folds improved activities. Compared to the currently used structure- or computational redesign-based PETase engineering, this HTS approach provides a new strategy for discovery of new beneficial mutation patterns of PETases.

A new continuous assay for quantitative assessment of enzymatic degradation of poly(ethylene terephthalate) (PET).

Enzymatic degradation of poly(ethylene terephthalate) (PET) has emerged as a promising route for ecofriendly biodegradation of plastic waste. Several discontinuous activity assays have been developed for assessing PET hydrolyzing enzymes, usually involving manual sampling at different time points during the course of the enzymatic reaction. In this work, we present a novel, compartmentalized UV absorbance assay for continuous detection of soluble hydrolysis products released during enzymatic degradation of PET. The methodology is based on removal of the walls separating two diagonally adjacent wells in UV-transparent microplates, to ensure passage of soluble enzymatic hydrolysis products between the two adjacent wells: One well holds an insoluble PET disk of defined dimensions and the other is used for continuous reading of the enzymatic product formation (at 240 nm). The assay was validated by quantifying the rate of mixing of the soluble PET degradation product BHET (bis(2-hydroxyethyl) terephthalate) between the two adjacent wells. The assay validation also involved a simple adjustment for water evaporation during prolonged assays. With this new assay, we determined the kinetic parameters for two PET hydrolases, DuraPETase and LCCICCG, and verified the underlying assumption of steady-state reaction rates. This new continuous assay enables fast exploration and robust kinetic characterization of PET degrading enzymes.