In-Brain Multiphoton Imaging of Vaterite Cargoes Loaded with Carbon Dots.

Biocompatible fluorescent agents are key contributors to the theranostic paradigm by enabling real-time in vivo imaging. This study explores the optical properties of phenylenediamine carbon dots (CDs) and demonstrates their potential for fluorescence imaging in cells and brain blood vessels. The nonlinear absorption cross-section of the CDs was measured and achieved values near 50 Goeppert-Mayer (GM) units with efficient excitation in the 775-895 nm spectral range. Mesoporous vaterite nanoparticles were loaded with CDs to examine the possibility of a biocompatible imaging platform. Efficient one- and two-photon imaging of the CD-vaterite composites uptaken by diverse cells was demonstrated. For an in vivo scenario, CD-vaterite composites were injected into the bloodstream of a mouse, and their flow was monitored within the blood vessels of the brain through a cranial window. These results show the potential of the platform for high-brightness biocompatible imaging with the potential for both sensing and simultaneous drug delivery.

Formation and Fluorescent Mechanism of Multiple Color Emissive Carbon Dots from o-Phenylenediamine.

Carbon dots (CDs) have received considerable attention in many application areas owing to their unique optical properties and potential applications; however, the fluorescent mechanism is an obstacle to their applications. Herein, three-color emissive CDs are prepared from single o-phenylenediamine (oPD) by regulating the ratio of ethanol and dimethylformamide (DMF). Fluorescent mechanism of these CDs is proposed as molecular state fluorescence. Reaction intermediates are identified using liquid chromatrography-mass spectroscopy (LC-MS) and 1H nuclear magnetic resonance (NMR) spectra. 1H-Benzo[d]imidazole (BI), 2,3-diaminophenazine (DAP), and 5,14-dihydroquinoxalino[2,3-b] phenazine (DHQP) are proposed to be the fluorophores of blue, green, and red emissive CDs by comparing their optical properties. As per the LC-MS and 1H-NMR analysis, DHQP with red emission tends to form from DAP and oPD in pure ethanol. By adding DMF, BI formation is enhanced and DHQP formation is suppressed. The prepared CDs exhibit green emission with DAP. When the DMF amount is >50%, BI formation is considerably promoted, resulting in DAP formation being suppressed. BI with blue emission then turns into the fluorophore of CDs. This result provides us an improved understanding of the fluorescent mechanism of oPD-based CDs, which guides us in designing the structure and optical properties of CDs.

A Facile One-Step Self-Assembly Strategy for Novel Carbon Dots Supramolecular Crystals with Ultralong Phosphorescence Controlled by NH4.

A new methodological design is proposed for carbon dots (CDs)-based crystallization-induced phosphorescence (CIP) materials via one-step self-assembled packaging controlled by NH4 +. O-phenylenediamine (o-PD) as a nitrogen/carbon source and the ammonium salts as oxidants are used to obtain CDs supramolecular crystals with a well-defined staircase-like morphology, pink fluorescence and ultralong green room-temperature phosphorescence (RTP) (733.56 ms) that is the first highest value for CDs-based CIP materials using pure nitrogen/carbon source by one-step packaging. Wherein, NH4 + and o-PD-derived oxidative polymers are prerequisites for self-assembled crystallization so as to receive the ultralong RTP. Density functional theory calculation indicates that NH4 + tends to anchor to the dimer on the surface state of CDs and guides CDs to cross-arrange in an X-type stacking mode, leading to the spatially separated frontier orbitals and the through-space charge transfer (TSCT) excited state in turn. Such a self-assembled mode contributes to both the small singlet-triplet energy gap (ΔEST) and the fast inter-system crossing (ISC) process that is directly related to ultralong RTP. This work not only proposes a new strategy to prepare CDs-based CIP materials in one step but also reveals the potential for the self-assembled behavior controlled by NH4 +.

An electrochemical sensor based on molecularly imprinted poly(o-phenylenediamine) for the detection of thymol.

A molecularly imprinted electrochemical sensor was facilely fabricated for the detection of thymol (THY). o-Phenylenediamine (oPD) was used as the functional monomer and electropolymerized on the surface of the glassy carbon electrode (GCE) by using THY as the templates. After the THY templates were removed with 50 % (v/v) ethanol, imprinted cavities complementary to the templates were formed within the poly(o-phenylenediamine) (PoPD) films. The resultant molecularly imprinted PoPD/GCE (MI-PoPD/GCE) was used for the detection of THY, and a wide linear range from 0.5 to 100 µM with a low limit of detection (LOD) of 0.084 µM were obtained under the optimal conditions. The developed MI-PoPD/GCE also displays high selectivity, reproducibility and stability for THY detection. Finally, the content of THY in the real samples was accurately determined by the as-fabricated MI-PoPD/GCE, demonstrating its high practicability and reliability.

Distinct Species-Specific and Toxigenic Metabolic Profiles for 6PPD and 6PPD Quinone by P450 Enzymes: Insights from In Vitro and In Silico Studies.

The tire rubber antioxidant N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) and its quinone product (6PPDQ) are prevalent emerging contaminants, yet their biotransformation profiles remain poorly understood, hampering the assessment of environmental and health risks. This study investigated the phase-I metabolism of 6PPD and 6PPDQ across aquatic and mammalian species through in vitro liver microsome (LM) incubations and in silico simulations. A total of 40 metabolites from seven pathways were identified using the highly sensitive nano-electrospray ionization mass spectrometry. Notably, 6PPDQ was consistently detected as a 6PPD metabolite with an approximate 2% yield, highlighting biotransformation as a neglected indirect exposure pathway for 6PPDQ in organisms. 6PPDQ was calculated to form through a facile two-step phenyl hydroxylation of 6PPD, catalyzed by cytochrome P450 enzymes. Distinct species-specific metabolic kinetics were observed, with fish LM demonstrating retarded biotransformation rates for 6PPD and 6PPDQ compared to mammalian LM, suggesting the vulnerability of aquatic vertebrates to these contaminants. Intriguingly, two novel coupled metabolites were identified for 6PPD, which were predicted to exhibit elevated toxicity compared to 6PPDQ and result from C-N oxidative coupling by P450s. These unveiled metabolic profiles offer valuable insights for the risk assessment of 6PPD and 6PPDQ, which may inform future studies and regulatory actions.

Tissue Accumulation and Biotransformation of 6PPD-Quinone in Adult Zebrafish and Its Effects on the Intestinal Microbial Community.

The pronounced lethality of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-quinone or 6PPDQ) toward specific salmonids, while sparing other fish species, has received considerable attention. However, the underlying cause of this species-specific toxicity remains unresolved. This study explored 6PPDQ toxicokinetics and intestinal microbiota composition in adult zebrafish during a 14-day exposure to environmentally realistic concentrations, followed by a 7-day recovery phase. Predominant accumulation occurred in the brain, intestine, and eyes, with the lowest levels in the liver. Six metabolites were found to undergo hydroxylation, with two additionally undergoing O-sulfonation. Semiquantitative analyses revealed that the predominant metabolite featured a hydroxy group situated on the phenyl ring adjacent to the quinone. This was further validated by assessing enzyme activity and determining in silico binding interactions. Notably, the binding affinity between 6PPDQ and zebrafish phase I and II enzymes exceeded that with the corresponding coho salmon enzymes by 1.04-1.53 times, suggesting a higher potential for 6PPDQ detoxification in tolerant species. Whole-genome sequencing revealed significant increases in the genera Nocardioides and Rhodococcus after exposure to 6PPDQ. Functional annotation and pathway enrichment analyses predicted that these two genera would be responsible for the biodegradation and metabolism of xenobiotics. These findings offer crucial data for comprehending 6PPDQ-induced species-specific toxicity.

Fragmentation Pattern-Based Screening Strategy Combining Diagnostic Ion and Neutral Loss Uncovered Novel para-Phenylenediamine Quinone Contaminants in the Environment.

Identifying transformed emerging contaminants in complex environmental compartments is a challenging but meaningful task. Substituted para-phenylenediamine quinones (PPD-quinones) are emerging contaminants originating from rubber antioxidants and have been proven to be toxic to the aquatic species, especially salmonids. The emergence of multiple PPD-quinones in various environmental matrices and evidence of their specific hazards underscore the need to understand their environmental occurrences. Here, we introduce a fragmentation pattern-based nontargeted screening strategy combining full MS/All ion fragmentation/neutral loss-ddMS2 scans to identify potential unknown PPD-quinones in different environmental matrices. Using diagnostic fragments of m/z 170.0600, 139.0502, and characteristic neutral losses of 199.0633, 138.0429 Da, six known and three novel PPD-quinones were recognized in air particulates, surface soil, and tire tissue. Their specific structures were confirmed, and their environmental concentration and composition profiles were clarified with self-synthesized standards. N-(1-methylheptyl)-N'-phenyl-1,4-benzenediamine quinone (8PPD-Q) and N,N'-di(1,3-dimethylbutyl)-p-phenylenediamine quinone (66PD-Q) were identified and quantified for the first time, with their median concentrations found to be 0.02-0.21 µg·g-1 in tire tissue, 0.40-2.76 pg·m-3 in air particles, and 0.23-1.02 ng·g-1 in surface soil. This work provides new evidence for the presence of unknown PPD-quinones in the environment, showcasing a potential strategy for screening emerging transformed contaminants in the environment.

o-phenylenediamine Derived Fluorescent Carbon Quantum dots for Detection of Hg(II) in Environmental Water.

With the expansion of human activities, the consequent influx of mercury (Hg) into the food chain and the environment is seriously threatening human life. Herein, nitrogen and sulfur co-doped fluorescent carbon quantum dots (yCQDs) were prepared via a hydrothermal method using o-phenylenediamine (OPD) and taurine as precursors. The morphological characteristics as well as spectral features of yCQDs indicated that the photoluminescence mechanism should be the molecular state fluorophores of 2, 3-diaminophenothiazine (oxOPD), which is the oxide of OPD. The as-synthesized yCQDs exhibited sensitive recognition of Hg2+. According to the investigation in combination of UV-Vis absorption spectra, time-resolved fluorescence spectra and quantum chemical calculations, the abundant functional groups on the surface of yCQDs allowed Hg2+ to bind with yCQDs through various interactions, and the formed complexes significantly inhibited the absorption of excitation light, resulting in the static fluorescence quenching of yCQDs. The proposed yCQDs was utilized for Hg2+ sensing with the limit of detection calculated to be 4.50 × 10- 8 M. Furthermore, the recognition ability of yCQDs for Hg2+ was estimated in tap water, lake water and bottled water, and the results indicated that yCQDs have potential applications in monitoring Hg2+.

Determination of Acetylcholinesterase Activity Based on Ratiometric Fluorescence Signal Sensing.

Acetylcholinesterase (AChE) plays an important role in the treatment of human diseases, environmental security and global food supply. In this study, the simple fluorescent indicators and MnO2 nanosheets were developed and integrated to establish a ratiometric fluorescence sensing system for the detection of AChE activity. Two fluorescence signals could be recorded independently at the same excitation wavelength, which extended the detection range and enhanced the visibility of results. Fluorescence of F-PDA was quenched by MnO2 nanosheets on account of inner filtering effect. Meanwhile, the nonfluorescent OPD was catalytically oxidized to 2,3-diaminophenazine by MnO2 nanosheets. The acetylcholine (ATCh) was catalytically hydrolyzed by AChE to enzymatic thiocholine, which decomposed MnO2 to Mn2+, recovered the fluorescence of F-PDA and reduced the emission of ox-OPD. Utilizing the fluorescence intensity ratio F468/F558 as the signal readout, the ratiometric fluorescence method was established to detect AChE activity. Under the excitation wavelength of 410 nm, the ratio F460/F558 against the AChE concentration demonstrated two linear relationships in the range 0.05 -1.0 and 1.0-50 U·L- 1 with a limit of detection (LOD) of 0.073 U·L- 1. The method was applied to the detection of AChE activity and the analysis of the inhibitor Huperzine-A. Due to the advantages of high sensitivity and favorable selectivity, the method possesses an application prospect in the activity deteceion of AChE and the screening of inhibitors.

One-pot Synthesis of High-performance Green-emitting Carbon Dots for Cd2+ Sensing and Anti-counterfeiting Applications.

This study presents a facile one-pot solvothermal synthesis of high-performance green fluorescent carbon dots (G-CDs) using o-phenylenediamine and ethylenediamine as precursors. The G-CDs show excellent optical, temporal, and chemical stability. Notably, they exhibit the highest quantum yield of 24.2% in ethanol and a strong green emission peaking at 546 nm under 440-490 nm excitation. In addition, G-CDs have outstanding salt resistance and multi-solvent compatibility. Due to its bright photoluminescence, G-CDs can be used as a secure ink for anti-counterfeiting. More remarkably, Cd2+ ions can efficiently quench the fluorescence of G-CDs with a detection limit of 0.152 µmol/L, enabling accurate quantification of Cd2+ in water systems. The simple synthesis of high-performance G-CDs expands their applicability in sensing and bioimaging.

A Dual-Signal Sensing for the Visual and Luminescent Detection of p-Phenylenediamine Based on Cerium-Nitrogen-Co-Doped Carbon Dots.

Herein, a visual and luminescent dual-mode (colorimetric and fluorometric) method for the detection of P-phenylenediamine (PPD) in hair dye was successfully established based on cerium-nitrogen co-doped carbon dots (Ce, N-CDs) that displayed remarkable luminescence and peroxidase activity. Ce, N-CDs catalyzed H2O2 to produce superoxide anion, which then oxidized the colorless 3,3,5,5-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB), capable of quenching the fluorescence through fluorescence resonance energy transfer (FRET) between Ce, N-CDs and oxTMB. The reducing properties of PPD could reduce oxTMB back to TMB, leading to a decrease in the absorption intensity of oxTMB and a fluorescence recovery of Ce, N-CDs. As a result, the quantitative detection of PPD could be achieved by measuring the absorption values of oxTMB and the fluorescence signal of Ce, N-CDs. The detection limits for PPD were calculated as 0.36 µM and 0.10 µM for colorimetry and fluorimetry, respectively. Furthermore, smartphone application (ColorPicker) capable of measuring the RGB value of the color was utilized in the detection system, facilitating on-site quantitative detection. This approach effectively shortens the detection time and simplifies the operation, offering a powerful and convenient tool for real-time monitoring of PPD.

Method for highly selective, ultrasensitive fluorimetric detection of Cu2+ and Al3+ by Schiff bases containing o-phenylenediamine and o-aminophenol.

Schiff base probes (1 and 2) made from o-phenylenediamine and o-aminophenol were appeared as highly selective fluorimetric chemosensor of Cu2+ and Al3+ ions respectively. Strong fluorescence emission of probe 1 at 415 nm (excitation at 350 nm) was instantly turned off on addition of Cu2+. Very weak fluorescence of probe 2 at 506 nm (excitation at 400 nm) was immediately turned on specifically by Al3+. Job's plot and ESI-MS results suggested 1:1 molar stoichiometric ratio of metal ion and probe in their respective complexes. Probe 1 and 2 had demonstrated very low detection limit (9.9 and 2.5 nM respectively). Binding of Cu2+ with probe 1 was found chemically reversible on addition of EDTA, while complexation between Al3+ and probe 2 was not reversible. On the basis of density functional theory (DFT) and spectroscopic results, probable mode of sensing of the metal ions by the probes were proposed. Quenching of the fluorescence of probe 1 by Cu2+ was attributed to the extensive transfer of charge from the probe molecule to paramagnetic copper ion. Whereas, in the Al3+-complex of probe 2, photo-induced electron transfer (PET) process from the imine nitrogen to salicylaldehyde moiety was restricted and thereby the weak emission intensity of probe 2 was enhanced significantly. Effective pH range of sensing the metal ions by probe 1 and 2 were 4 to 8 and 6 to 10 respectively. Probe 1 was also applied in the design of a logic gate for Cu2+ detection. Moreover, probe 1 and 2 was also used in water sample analysis for quantitative estimation of Cu2+ and Al3+ respectively.

Need for new strategies to improve the recall and avoidance rates of contact allergens: A retrospective cohort study from Turkey.

BACKGROUND: Previous studies reported a low-to-moderate benefit from patch testing regarding allergen recall and avoidance. OBJECTIVES: To determine the allergen recall and avoidance rates of patients with allergic contact dermatitis (ACD) in Turkey. METHODS: This was a retrospective cohort study based on a phone questionnaire of 465 patients diagnosed with ACD from major allergen groups, that is, metals, preservatives, rubber, fragrances (ubiquitous allergens) and hair dye/black henna, topical drug and resins (nonubiquitous allergens), at our tertiary referral centre between 1996 and 2018. RESULTS: Among 176 responders, allergen groups were remembered better (53.4%) than the individual allergens (36.9%). Age <40 years and keeping the allergy pass had a significantly positive impact on the recall rate of methylchloroisothiazolinone/methylisothiazolinone and nickel, particularly non-occupational nickel allergy from metal jewellery in females, respectively. Exacerbations of ACD (56.3%) were mainly due to reexposures to ubiquitous allergens. 42.9% of patients with occupational ACD changed or quit their job, most of them being construction workers and hairdressers, showing a high share (83.3%) of benefit. CONCLUSIONS: The overall rates of allergen recall and avoidance were moderate. New strategies are needed to improve the recall and avoidance rates of contact allergens, such as increased use of allergy pass, smartphone applications and legal precautions.

Construction of a Colorimetric and Fluorescence Dual-Mode Immunoassay Detection of Alpha-Hemolysin in Milk.

Alpha-hemolysin (Hla) is a major virulence factor secreted by Staphylococcus aureus (S. aureus), which can lyse a variety of mammalian cells and help bacteria evade the host immune system or antibiotics, posing a safety hazard to human health. Therefore, it is critical to establish a quick-responsive and sensitive method for Hla detection to ensure food safety. In this work, a dual-mode immunoassay was developed with both colorimetric and fluorescent readouts for discriminative detection of Hla. The proposed sensing system consists of p-phenylenediamine (PPD) and fluorescein, where fluorescein functions as a fluorescent reporter, and PPD serves a dual function as a colorimetric reporter and fluorescence quencher. Subsequently, the reaction system of this method was optimized, and the detection limit, sensitivity, and specificity were evaluated. Under optimal conditions, the proposed method possesses excellent analytical performance in the range from 0.5 to 500 ng/mL with a limit of detection as low as 0.5 ng/mL. Noteworthy, this method was successfully employed for the detection of Hla in milk with good selectivity and high accuracy. Overall, the dual-mode immunoassay provides a superior platform for the on-site, quantitative, and accurate detection of Hla in food samples.

Ratiometric fluorescence probe based on carbon dots and p-phenylenediamine-derived nanoparticles for the sensitive detection of manganese ions.

A ratiometric fluorescence probe based on carbon quantum dots with 420 nm emission (bCQDs) and a p-phenylenediamine-derived fluorescence probe with 550 nm emission (yprobe) is constructed for the detection of Mn2+. The presence of Mn2+ results in the enhanced absorption band at 400 nm of yprobe, and the fluorescence of yprobe is significantly enhanced based on the chelation-enhanced fluorescence mechanism. The fluorescence of bCQDs is then quenched based on the inner filtration effect. The ratio (I550/I420) linearly increases with the increase of Mn2+ concentration within 2.00 × 10-7-1.50 × 10-6 M, and the limit of detection is 1.76 × 10-9 M. Given the fluorescence color changing from blue to yellow, the visual sensing of Mn2+ is feasible based on bCQDs/yprobe coupled with RGB value analysis. The practicability of the proposed method has been verified in tap water, lake water, and sparkling water beverage, indicating that bCQDs/yprobe has promising application in Mn2+ monitoring.

An Optimized Method for LC-MS-Based Quantification of Endogenous Organic Acids: Metabolic Perturbations in Pancreatic Cancer.

Accurate and reliable quantification of organic acids with carboxylic acid functional groups in complex biological samples remains a major analytical challenge in clinical chemistry. Issues such as spontaneous decarboxylation during ionization, poor chromatographic resolution, and retention on a reverse-phase column hinder sensitivity, specificity, and reproducibility in multiple-reaction monitoring (MRM)-based LC-MS assays. We report a targeted metabolomics method using phenylenediamine derivatization for quantifying carboxylic acid-containing metabolites (CCMs). This method achieves accurate and sensitive quantification in various biological matrices, with recovery rates from 90% to 105% and CVs ≤ 10%. It shows linearity from 0.1 ng/mL to 10 µg/mL with linear regression coefficients of 0.99 and LODs as low as 0.01 ng/mL. The library included a wide variety of structurally variant CCMs such as amino acids/conjugates, short- to medium-chain organic acids, di/tri-carboxylic acids/conjugates, fatty acids, and some ring-containing CCMs. Comparing CCM profiles of pancreatic cancer cells to normal pancreatic cells identified potential biomarkers and their correlation with key metabolic pathways. This method enables sensitive, specific, and high-throughput quantification of CCMs from small samples, supporting a wide range of applications in basic, clinical, and translational research.

Synthesis of 1,3,5-Triazepines and Benzo[f][1,3,5]triazepines and Their Biological Activity: Recent Advances and New Approaches.

This review article discusses the recent progress in synthesizing seven-membered ring 1,3,5-triazepine and benzo[f][1,3,5]triazepine derivatives. These derivatives can be either unsaturated, saturated, fused, or separated. This review covers strategies and procedures developed over the past two decades, including cyclo-condensation, cyclization, methylation, chlorination, alkylation, addition, cross-coupling, ring expansions, and ring-closing metathesis. This review discusses the synthesis of 1,3,5-triazepine derivatives using nucleophilic or electrophilic substitution reactions with various reagents such as o-phenylenediamine, 2-aminobenzamide, isothiocyanates, pyrazoles, thiazoles, oxadiazoles, oxadiazepines, and hydrazonoyl chloride. This article systematically presents new approaches and techniques for preparing these compounds. It also highlights the biological importance of benzo[f][1,3,5]triazepine derivatives, which have been used as drugs for treating nervous system diseases. This review aims to provide researchers with the necessary information to create and develop new derivatives of these compounds as quickly as possible.

Highly Sensitive Measurement of Horseradish Peroxidase Using Surface-Enhanced Raman Scattering of 2,3-Diaminophenazine.

The development of various enzyme-linked immunosorbent assays (ELISAs) coupled with surface-enhanced Raman scattering (SERS) detection is a growing area in analytical chemistry due to their potentially high sensitivity. A SERS-based ELISA with horseradish peroxidase (HRP) as an enzymatic label, an o-phenylenediamine (oPD) substrate, and a 2,3-diaminophenazine (DAP) enzymatic product was one of the first examples of such a system. However, the full capabilities of this long-known approach have yet to be revealed. The current study addresses a previously unrecognized problem of SERS detection stage performance. Using silver nanoparticles and model mixtures of oPD and DAP, the effects of the pH, the concentration of the aggregating agent, and the particle surface chloride stabilizer were extensively evaluated. At the optimal mildly acidic pH of 3, a 0.93 to 1 M citrate buffer, and AgNPs stabilized with 20 mM chloride, a two orders of magnitude advantage in the limits of detection (LODs) for SERS compared to colorimetry was demonstrated for both DAP and HRP. The resulting LOD for HRP of 0.067 pmol/L (1.3 amol per assay) underscores that the developed approach is a highly sensitive technique. We suppose that this improved detection system could become a useful tool for the development of SERS-based ELISA protocols.

Overall analyses of the reactions catalyzed by acetohydroxyacid synthase/acetolactate synthase using a precolumn derivatization-HPLC method.

A precolumn derivatization-HPLC method using 2,4-dinitrophenylhydrazine and 4-nitro-o-phenylenediamine as respective labeling reagents for comprehensive analyses of the reactions catalyzed by acetohydroxyacid synthase (AHAS)/acetolactate synthase (ALS) is developed and evaluated in this research. Comparison with the classic Bauerle' UV assay which can analyze the enzymes only through measurement of acetoin production, the HPLC method shows advantages because it can analyze the enzymes not only via determination of consumption of the substrate pyruvate, but also via measurement of formation of the products including acetoin, 2,3-butanedione, and acetaldehyde in the enzymatic reactions. Thus the results deduced from the HPLC method can reflect the trait of each enzyme in a more precise manner. As far as we know, this is the first time that the reactions mediated by AHAS/ALS using pyruvate as a single substrate are globally analyzed and the features of the enzymes are properly discussed.

Dermal exposure and hair dye: Assessing potential bladder cancer risk from permanent hair dye.

Hair dye products include a range of chemicals, depending on the type and color. A common primary intermediate compound used to achieve the permanent effect of hair dye is para-phenylenediamine (PPD). 4-aminobiphenyl (4-ABP) has reportedly been found as a trace contaminant (presumably from the para-phenylenediamine [PPD] ingredient) in consumer permanent hair dye. While several regulatory agencies have designated 4-ABP as a human bladder carcinogen based on evidence in humans and experimental animals, only the Office of Environmental Health Hazard Assessment (OEHHA) have established a cancer risk value for 4-ABP of 0.03 µg/day based on liver tumors developed in mice. A hypothetical dermal risk assessment was performed to estimate the bladder cancer risk associated with exposure to 4-ABP from personal use of permanent hair dye potentially containing incidental 4-ABP. Previously published laboratory analyses characterizing 4-ABP concentrations in consumer hair dyes indicate the concentrations can range from below the limit of detection to 8120 ppb. Precautionary estimates of human scalp surface area, maximum skin adherence, hair dye retention factor, and percent dermal absorption were used to estimate the daily systemic exposure doses (SEDs) from dermal application of hair dye. The estimated SEDs ranged from 0.05 to 3000 pg/day. A margin of safety (MOS) was calculated as the ratio of the NSRL to the SED and ranged from 10 to 570,000. The results of this study suggest that there is no indication of increased risk of bladder cancer in humans from exposure to 4-ABP in consumer hair dye, especially as it is extremely unlikely that a consumer would use permanent hair dye on a daily basis (as this assessment models).