De novo Semi-Synthetic Platform for Monitoring Protein degradation in Live Cells.

We designed a platform for monitoring the degradation of exogenous proteins in live cells. We engineered a semi-synthetic platform, which consists of Enhanced Green Fluorescent Protein tagged with SpyCatcher to enable its conjugation to a SpyTag peptide bearing a Von Hippel-Lindau E3 ligand, which was delivered to live cells to promote its degradation. This platform lays the ground for studying the degradation of endogenous proteins equipped with SpyTag and for tracking the degradation of post-translationally modified proteins in live cells.

Enhancing the stress resistance of nitrile hydratase from Rhodococcus ruber via SpyTag/SpyCatcher-mediated α- and ß- subunits ligation.

BACKGROUND: Nitrile Hydratase (NHase) is one of the most important industrial enzyme widely used in the petroleum exploitation field. The enzyme, composed of two unrelated α- and ß-subunits, catalyzes the conversion of acrylonitrile to acrylamide, releasing a significant amount of heat and generating the organic solvent product, acrylamide. Both the heat and acrylamide solvent have an impact on the structural stability of NHase and its catalytic activity. Therefore, enhancing the stress resistance of NHase to toxic substances is meaningful for the petroleum industry. METHODS AND RESULTS: To improve the thermo-stability and acrylamide tolerance of NHase, the two subunits were fused in vivo using SpyTag and SpyCatcher, which were attached to the termini of each subunit in various combinations. Analysis of the engineered strains showed that the C-terminus of ß-NHase is a better fusion site than the N-terminus, while the C-terminus of α-NHase is the most suitable site for fusion with a larger protein. Fusion of SpyTag and SpyCatcher to the C-terminus of ß-NHase and α-NHase, respectively, led to improved acrylamide tolerance and a slight enhancement in the thermo-stability of one of the engineered strains, NBSt. CONCLUSION: These results indicate that in vivo ligation of different subunits using SpyTag/SpyCatcher is a valuable strategy for enhancing subunit interaction and improving stress tolerance.

Screening of inhibitors on successful covalent tyrosinase coupling with help from SpyBank.

Microbial metabolites are an important source of tyrosinase (TYR) inhibitors because of their rich chemical diversity. However, because of the complex metabolic environment of microbial products, it is difficult to rapidly locate and identify natural TYR inhibitors. Affinity-based ligand screening is an important method for capturing active ingredients in complex samples, but ligand immobilization is an important factor affecting the screening process. In this paper, TYR was used as ligand, and the SpyTag/SpyCatcher coupling system was used to rapidly construct affinity chromatography vectors for screening TYR inhibitors and separating active components from complex samples. We successfully expressed SpyTag-TYR fusion protein and SpyCatcher protein, and incubated SpyCatcher protein with epoxy-activated agarose. The SpyTag-TYR protein was spontaneously coupled with SpyCatcher to obtain an affinity chromatography filler for immobilization of TYR, and the performance of the packaging material was characterized. Finally, compound 1 with enzyme inhibitory activity was successfully obtained from the fermentation product of marine microorganism C. Through HPLC, MS, 1H NMR and 13C NMR analyses, its structure was deduced as azelaic acid, and its activity was analyzed. The results showed that this is a feasible method for screening TYR inhibitors in complex systems.

Evaluation of SARS-CoV-2-Specific IgY Antibodies: Production, Reactivity, and Neutralizing Capability against Virus Variants.

The emergence of SARS-CoV-2 in late 2019 initiated a global pandemic, which led to a need for effective therapeutics and diagnostic tools, including virus-specific antibodies. Here, we investigate different antigen preparations to produce SARS-CoV-2-specific and virus-neutralizing antibodies in chickens (n = 3/antigen) and rabbits (n = 2/antigen), exploring, in particular, egg yolk for large-scale production of immunoglobulin Y (IgY). Reactivity profiles of IgY preparations from chicken sera and yolk and rabbit sera were tested in parallel. We compared three types of antigens based on ancestral SARS-CoV-2: an inactivated whole-virus preparation, an S1 spike-protein subunit (S1 antigen) and a receptor-binding domain (RBD antigen, amino acids 319-519) coated on lumazine synthase (LS) particles using SpyCather/SpyTag technology. The RBD antigen proved to be the most efficient immunogen, and the resulting chicken IgY antibodies derived from serum or yolk, displayed strong reactivity with ELISA and indirect immunofluorescence and broad neutralizing activity against SARS-CoV-2 variants, including Omicron BA.1 and BA.5. Preliminary in vivo studies using RBD-lumazine synthase yolk preparations in a hamster model showed that local application was well tolerated and not harmful. However, despite the in vitro neutralizing capacity, this antibody preparation did not show protective effect. Further studies on galenic properties seem to be necessary. The RBD-lumazine antigen proved to be suitable for producing SARS-CoV-2 specific antibodies that can be applied to such therapeutic approaches and as reference reagents for SARS-CoV-2 diagnostics, including virus neutralization assays.

Chemically cross-linked hydrogels from repetitive protein arrays.

Biomaterials for tissue regeneration must mimic the biophysical properties of the native physiological environment. A protein engineering approach allows the generation of protein hydrogels with specific and customised biophysical properties designed to suit a particular physiological environment. Herein, repetitive engineered proteins were successfully designed to form covalent molecular networks with defined physical characteristics able to sustain cell phenotype. Our hydrogel design was made possible by the incorporation of the SpyTag (ST) peptide and multiple repetitive units of the SpyCatcher (SC) protein that spontaneously formed covalent crosslinks upon mixing. Changing the ratios of the protein building blocks (ST:SC), allowed the viscoelastic properties and gelation speeds of the hydrogels to be altered and controlled. The physical properties of the hydrogels could readily be altered further to suit different environments by tuning the key features in the repetitive protein sequence. The resulting hydrogels were designed with a view to allow cell attachment and encapsulation of liver derived cells. Biocompatibility of the hydrogels was assayed using a HepG2 cell line constitutively expressing GFP. The cells remained viable and continued to express GFP whilst attached or encapsulated within the hydrogel. Our results demonstrate how this genetically encoded approach using repetitive proteins could be applied to bridge engineering biology with nanotechnology creating a level of biomaterial customisation previously inaccessible.

A Split-Cre system designed to detect simultaneous expression of two genes based on SpyTag/SpyCatcher conjugation and Split-GFP dimerization.

The Split-Cre system is a powerful tool for genetic manipulation and can be used to spatiotemporally control gene expression in vivo. However, the low activity of the reconstituted NCre/CCre recombinase in the Split-Cre system limits its application as an indicator of the simultaneous expression of a pair of genes of interest. Here, we describe two approaches for improving the activity of the Split-Cre system after Cre reconstitution based on self-associating split GFP (Split-GFP) and SpyTag/SpyCatcher conjugation. First, we created the Split-GFP-Cre system by constructing fusion proteins of NCre and CCre with the N-terminal and C-terminal subunits of GFP, respectively. Reconstitution of Cre by GFP-mediated dimerization of the two fusion proteins resulted in recombinase activity approaching that of full-length Cre in living cells. Second, to further increase recombinase activity at low levels of Split-Cre expression, the Split-Spy-GCre system was established by incorporating the sequences for SpyTag and SpyCatcher into the components of the Split-GFP-Cre system. As anticipated, covalent conjugation of the SpyTag and SpyCatcher segments improved Split-GFP dimerization to further increase Cre recombinase activity in living cells. The increased efficiency and robustness of this dual-split system (Split-Cre and Split-GFP) minimize the problems of incomplete double gene-specific KO or low labeling efficiency due to poor NCre/CCre recombinase activity. Thus, this Split-Spy-GCre system allows more precise gene manipulation of cell subpopulations, which will provide advanced analysis of genes and cell functions in complex tissue such as the immune system.

Development of a synthetic nanoparticle vaccine presenting the HIV-1 envelope glycoprotein.

Two-component self-assembling virus-like particles (VLPs) are promising scaffolds for achieving high-density display of HIV-1 envelope (gp140) trimers, which can improve the induction of neutralising antibodies (NAbs). In this study gp140 was displayed on the surface of VLPs formed by the AP205 phage coat protein. The CAP256 SU gp140 antigen was selected as the patient who this virus was isolated from developed broadly neutralising antibodies (bNAbs) shortly after superinfection with this virus. The CAP256 SU envelope is also sensitive to several bNAbs and has shown enhanced reactivity for certain bNAb precursors. A fusion protein comprising the HIV-1 CAP256 SU gp140 and the SpyTag (ST) (gp140-ST) was produced in HEK293 cells, and trimers were purified to homogeneity using gel filtration. SpyCatcher (SC)-AP205 VLPs were produced inEscherichia coliand purified by ultracentrifugation. The gp140-ST trimers and the SC-AP205 VLPs were mixed in varying molar ratios to generate VLPs displaying the glycoprotein (AP205-gp140-ST particles). Dynamic light scattering, negative stain electron microscopy and 2D classification indicated that gp140-ST was successfully bound to the VLPs, although not all potential binding sites were occupied. The immunogenicity of the coupled VLPs was evaluated in a pilot study in rabbits. One group was injected four times with coupled VLPs, and the second group was primed with DNA vaccines expressing Env and a mosaic Gag, followed by modified vaccinia Ankara expressing the same antigens. The animals were then boosted twice with coupled VLPs. Encouragingly, gp140-ST displayed on SC-AP205 VLPs was an effective boost to heterologously primed rabbits, leading to induction of autologous Tier 2 neutralising antibodies in 2/5 rabbits. However, four inoculations of coupled VLPs alone failed to elicit any Tier 2 antibodies. These results demonstrate that the native-like structure of HIV-1 envelope trimers and selection of a geometrically-suitable nanoparticle scaffold to achieve a high-density display of the trimers are important considerations that could improve the effect of nanoparticle-displayed gp140.

Molecular super-gluing: a straightforward tool for antibody labelling and its application to mycotoxin biosensing.

Mycotoxins are low molecular weight toxic compounds, which can cause severe health problems in animals and humans. Immunoassays allow rapid, simple and cost-effective screening of mycotoxins. Sandwich assays with a direct readout provide great improvement in terms of selectivity and sensitivity, compared to the widely used competitive assay formats, for the analysis of low molecular weight molecules. In this work, we report a non-competitive fluorescence anti-immune complex (IC) immunoassay, based on the specific recognition of HT-2 toxin with a pair of recombinant antibody fragments, namely antigen-binding fragment (Fab) (anti-HT-2 (10) Fab) and single-chain variable fragment (scFv) (anti-IC HT-2 (10) scFv). The SpyTag and SpyCatcher glue proteins were applied for the first time as a bioconjugation tool for the analysis of mycotoxins. To this aim, a SpyTag-mScarlet-I (fluorescent protein) and scFv-SpyCatcher fusion proteins were constructed, produced and fused in situ during the assay by spontaneous Tag-Catcher binding. The assay showed an excellent sensitivity with an EC50 of 4.8 ± 0.4 ng mL-1 and a dynamic range from 1.7 ± 0.3 to 13 ± 2 ng mL-1, an inter-day reproducibility of 8.5% and a high selectivity towards HT-2 toxin without cross-reactivity with other Fusarium toxins. The bioassay was applied to the analysis of the toxin in an oat reference material and in oat samples, with a LOD of 0.6 µg kg-1, and the results were validated by analysing a certificate reference material and by HPLC-MS/MS.

A modular and self-adjuvanted multivalent vaccine platform based on porcine circovirus virus-like nanoparticles.

BACKGROUND: Virus-like particles (VLPs) are supramolecular structures composed of multiple protein subunits and resemble natural virus particles in structure and size, making them highly immunogenic materials for the development of next-generation subunit vaccines. The orderly and repetitive display of antigenic epitopes on particle surface allows efficient recognition and cross-link by B cell receptors (BCRs), thereby inducing higher levels of neutralizing antibodies and cellular immune responses than regular subunit vaccines. Here, we present a novel multiple antigen delivery system using SpyCatcher/Spytag strategy and self-assembled VLPs formed by porcine circovirus type 2 (PCV2) Cap, a widely used swine vaccine in solo. RESULTS: Cap-SC, recombinant Cap with a truncated SpyCatcher polypeptide at its C-terminal, self-assembled into 26-nm VLPs. Based on isopeptide bonds formed between SpyCatcher and SpyTag, classical swine fever virus (CSFV) E2, the antigen of interest, was linked to SpyTag and readily surface-displayed on SpyCatcher decorated Cap-SC via in vitro covalent conjugation. E2-conjugated Cap VLPs (Cap-E2 NPs) could be preferentially captured by antigen presenting cells (APCs) and effectively stimulate APC maturation and cytokine production. In vivo studies confirmed that Cap-E2 NPs elicited an enhanced E2 specific IgG response, which was significantly higher than soluble E2, or the admixture of Cap VLPs and E2. Moreover, E2 displayed on the surface did not mask the immunodominant epitopes of Cap-SC VLPs, and Cap-E2 NPs induced Cap-specific antibody levels and neutralizing antibody levels comparable to native Cap VLPs. CONCLUSION: These results demonstrate that this modularly assembled Cap-E2 NPs retains the immune potential of Cap VLP backbone, while the surface-displayed antigen significantly elevated E2-induced immune potency. This immune strategy provides distinctly improved efficacy than conventional vaccine combination. It can be further applied to the development of dual or multiple nanoparticle vaccines to prevent co-infection of PCV2 and other swine pathogens.

Effect of SpyTag/SpyCatcher cyclization on stability and refolding of green fluorescent protein.

To study the effect of SpyTag/SpyCatcher cyclization on stability and refolding of protein, we constructed a cyclized green fluorescent protein (SRGFP) and its derivative to act as a linear structure control (L-SRGFP). SRGFP and L-SRGFP showed similar fluorescence characteristics to the wild-type GFP, while compared with GFP and L-SRGFP, the thermal stability and denaturation resistance of SRGFP were improved. The refolding efficiencies of these three denatured proteins were investigated under different pH, temperature and initial protein concentration conditions, and it was found that SRGFP was superior to GFP and L-SRGFP in terms of refolding yield and refolding speed. In the pH range of 8.0-8.5, SRGFP could basically recover all fluorescence, while GFP and L-SRGFP recovered only about 87.52% and 88.58%. When refolded at a high temperature (37 °C), SRGFP still recovered 85.27% of the fluorescence, whereas GFP and L-SRGFP recovered only around 69.43% and 68.45%. At a high initial protein concentration (5 mg/mL), the refolding yield of SRGFP was about 15% higher than that of both GFP and L-SRGFP. These results suggest that the introduction of SpyRing structure (head-to-tail cyclization via SpyTag and SpyCatcher) improved the protein's stability and facilitated the refolding of denatured protein.

Efficient biosynthesis of (2S, 3R)-4-methylsulfonylphenylserine by artificial self-assembly of enzyme complex combined with an intensified acetaldehyde elimination system.

(2S, 3R)-4-methylsulfonylphenylserine [(2S, 3R)-MPS], a key chiral precursor for antibiotics florfenicol and thiamphenicol, could be asymmetrically synthesized by l-threonine transaldolase (LTTA) coupled with an acetaldehyde elimination system. The low efficiency of acetaldehyde elimination system blocked further accumulation of (2S, 3R)-MPS. To address this issue, strengthening acetaldehyde elimination system and enzyme self-assembly strategy were combined to accelerate biosynthesis of (2S, 3R)-MPS. The new multi-enzyme cascade with intensified acetaldehyde elimination system BL21 (PsLTTAD2/ScADH/BtGDH) could produce (2S, 3R)-MPS with a titer of 157.6 mM, 1.7-folds than that produced by the original system BL21 (PsLTTAD2/ApADH/CbFDH). Moreover, self-assembly of PsLTTAD2 and ScADH by respective fusion of SpyTag and SpyCatcher were carried out to develop a self-assembled multi-enzyme cascade BL21 (ST-PsLTTAD2/SC-ScADH/BtGDH). As a result, the yield of (2S, 3R)-MPS was up to 248.1 mM with 95% de. As far as we knew, that represented the highest yield of (2S, 3R)-MPS by enzymatic synthesis, and therefore was a promising and green route for industrial production of this valuable compound.

Influence of Fluorination on Single-Molecule Unfolding and Rupture Pathways of a Mechanostable Protein Adhesion Complex.

We investigated the influence of fluorination on unfolding and unbinding reaction pathways of a mechanostable protein complex comprising the tandem dyad XModule-Dockerin bound to Cohesin. Using single-molecule atomic force spectroscopy, we mapped the energy landscapes governing the unfolding and unbinding reactions. We then used sense codon suppression to substitute trifluoroleucine in place of canonical leucine globally in XMod-Doc. Although TFL substitution thermally destabilized XMod-Doc, it had little effect on XMod-Doc:Coh binding affinity at equilibrium. When we mechanically dissociated global TFL-substituted XMod-Doc from Coh, we observed the emergence of a new unbinding pathway with a lower energy barrier. Counterintuitively, when fluorination was restricted to Doc, we observed mechano-stabilization of the non-fluorinated neighboring XMod domain. This suggests that intramolecular deformation is modulated by fluorination and highlights the differences between equilibrium thermostability and non-equilibrium mechanostability. Future work is poised to investigate fluorination as a means to modulate mechanical properties of synthetic proteins and hydrogels.

Cefoperazone induces esterase B expression by EstR and esterase B enhances cefoperazone activity at the periplasm.

The occurrence of antibiotic resistance bacteria has become a major threat to public health. We have recently discovered a transcriptional activator that belongs to MarR family, EstR, and an esterase B (EstB) with a newly proposed de-arenethiolase activity from Sphingobium sp. SM42. De-arenethiolase activity involves the removal of the small aromatic side chain of cephalosporin antibiotics as an excellent leaving group by the enzymatic CS bond cleavage. Here, we report the regulation of estB through EstR as an activator in response to a third generation cephalosporin, cefoperazone, antibiotic. Cefoperazone induced the expression of estB in wild type Sphingobium sp., but not in the estR knockout strain, and the induction was restored in the complemented strain. Moreover, we revealed the importance of EstB localization in periplasm. Since EsB has the ability to inactivate selected ß-lactam antibiotics in vitro, it is possible that the enzyme works at the periplasmic space of Gram negative bacteria similar to ß-lactamases. EstB was genetically engineered by incorporating NlpA binding motif, or OmpA signal sequence, or SpyTag-SpyCatcher to the estB gene to mobilize it to different compartments of periplasm; inner membrane, outer membrane, and periplasmic space, respectively. Surprisingly, we found that Sphingobium sp. SM42 and E. coli expressing EstB at the periplasm were more sensitive to cefoperazone. The possible drug enhancement mechanism by enzyme was proposed. This work might lead to a novel strategy to tackle antibiotic resistance problem.

Spy chemistry-enabled protein directional immobilization and protein purification.

Site-directed protein immobilization allows the homogeneous orientation of proteins with high retention of activity, which is advantageous for many applications. Here, we report a facile, specific, and efficient strategy based on the SpyTag-SpyCatcher chemistry. Two SpyTag-fused model proteins, that is, the monomeric red fluorescent protein (RFP) and the oligomeric glutaryl-7-aminocephalosporanic acid acylase, were easily immobilized onto a SpyCatcher-modified resin directly from cell lysates, with activity recoveries in the range of 85-91%. This strategy was further adapted to protein purification, which proceeded through the selective capture of the SpyCatcher-fused target proteins by a SpyTag-modified resin, with the aid of an intein to generate authentic N-termini. For two model proteins, that is, RFP and a variable domain of a heavy chain antibody, the yields were ∼3-7 mg/L culture with >90% purities. This approach could provide a versatile tool for producing high-performance immobilized protein devices and proteins for industrial and therapeutic uses.

Surface display of classical swine fever virus E2 glycoprotein on gram-positive enhancer matrix (GEM) particles via the SpyTag/SpyCatcher system.

The E2 envelope protein is the main protective antigen of classical swine fever virus (CSFV). Importantly, gram-positive enhancer matrix (GEM) particles can work as an immunostimulant and/or carrier system to improve the immune effect of antigens. In this study, the artificially designed E2-Spy was expressed and glycosylated in Pichia pastoris, and subsequently conjugated with SpyCatcher-PA which was expressed in Escherichia coli. The conjugated E2-Spy-PA was displayed on the surface of GEM particles, generating the E2-Spy-PA-GEM complex. Blocking ELISA analysis and neutralization assays showed that both E2-Spy and E2-Spy-PA-GEM complexes induced high levels of anti-CSFV antibodies in mice. Furthermore, statistical analyses indicated that the E2-Spy-PA-GEM complex exhibited enhanced immunogenicity compared with E2-Spy alone.

Post-translational Assembly of Protein Parts into Complex Devices by Using SpyTag/SpyCatcher Protein Ligase.

Exploiting the innate modularity of proteins has allowed advances across the fields of synthetic biology and biotechnology. By using standardized protein components as building blocks, complex, multiprotein assemblies with sophisticated functions can be generated; feats previously not possible with strictly genetic-engineering approaches. The development of strategies for protein assembly is accelerating, pushing the boundaries of protein architecture. SpyTag and SpyCatcher protein ligase is a recent advance in this field that allows plug-and-play modularity by harnessing post-translational protein assembly. Herein, we review the latest applications of this powerful tool including novel enzyme assemblies, modularizing protein display, and the generation of antibody and antibody-like "devices" by using SpyTag/SpyCatcher technology.

SpyTag/SpyCatcher cyclization enhances the thermostability and organic solvent tolerance of L-phenylalanine aldolase.

OBJECTIVES: To improve the thermostability and organic solvent tolerance of L-phenylserine aldolase, the in vivo SpyTag/SpyCatcher cyclization strategy was applied in this work. RESULTS: The in vivo cyclization of L-phenylserine aldolase was achieved by fusing the tags of SpyCatcher and SpyTag to the N- and C-termini of the enzyme, respectively. The kcat values and the circular dichroism spectra of the linear and cyclized LPAs are very similar, indicating that the cyclized LPA can be folded appropriately like the wild type. The cyclized enzyme has better thermostability and organic solvent tolerance than does the wild type. The half-life of L-phenylserine aldolase after cyclization was increased by 8.3 times at 70 °C, and the T50 also increased from 56.8 to 67.1 °C. The cyclized enzyme showed a remarkably higher tolerance to organic solvents (e.g., methanol, ethanol and acetone). CONCLUSIONS: These results suggest that the in vivo cyclization using SpyTag/SpyCatcher is an effective strategy to improve the stability of enzymes, which potentially could be applied in industrial bioconversion.

Ferritin nanoparticle-based SpyTag/SpyCatcher-enabled click vaccine for tumor immunotherapy.

Recently, tumor neoantigens have been attractive for development of personal therapeutic vaccines. However, how to instantly deliver multiple neoantigens for efficient anti-tumor immunity is still challenging. Here, we established a SpyCatcher-modified ferritin nanoparticle platform, which permits convenient and stable covalent conjugation with tumor specific antigens containing SpyTag in a click-link manner. These ferritin nanoparticles are rapidly drained to lymph nodes and target dendritic cells, especially CD8α+ population, upon subcutaneous immunization. Ferritin nanoparticles carrying HPV16 oncogene E7 peptide antigen or MC38 tumor derived mutant neoantigens elicit about 2-3 folds enhanced antigen-specific cytotoxic T lymphocyte (CTL) response than soluble peptide antigens and significantly suppress the growth of E7-related or MC38 tumors. The anti-tumor effect was further enhanced in combination with PD-1 checkpoint blockade. Together, our study provides a ferritin nanoparticle-based, SpyTag/SpyCatcher-enabled click vaccine platform, especially for personalized tumor immunotherapy.

Development of SpyTag/SpyCatcher-Bacmid Expression Vector System (SpyBEVS) for Protein Bioconjugations Inside of Silkworms.

Protein conjugations at post-translational levels are known to be essential to protein stability and function. Recently, it has been proven that the split protein CnaB2 (SpyTag/SpyCatcher, ST/SC) from Streptococcus pyogenes can induce covalent conjugation rapidly and efficiently under various conditions. The protein of interest fused with the split protein SC/ST could be assembled spontaneously. In light of this finding, we introduced the ST/SC protein coupling concept into the silkworm-bacmid protein expression system (SpyBEVS). As a proof of concept, we first examined and confirmed that a competent ligation occurred between ST/SC-fused protein partners in vitro in cultured silkworm cells and in vivo in silkworm larvae by co-infection of several recombinant baculoviruses. The protein conjugation could be also achieved sufficiently by a simple one-step mixture of purified ST/SC-tagged peptide-protein pairs in vitro. Given the flexibility and robustness of silkworm-BEVS, our results on SpyBEVS show an alternative method for enabling the production of protein decorations in vitro and inside of silkworms.

A novel synthetic trivalent single chain variable fragment (tri-scFv) construction platform based on the SpyTag/SpyCatcher protein ligase system.

BACKGROUND: Advances in antibody engineering provide strategies to construct recombinant antibody-like molecules with modified pharmacokinetic properties. Multermerization is one strategy that has been used to produce antibody-like molecules with two or more antigen binding sites. Multimerization enhances the functional affinity (avidity) and can be used to optimize size and pharmacokinetic properties. Most multimerization strategies involve genetically fusing or non-covalently linking antibody fragments using oligomerization domains. Recent studies have defined guidelines for producing antibody-like molecules with optimal tumor targeting properties, which require intermediates size (70-120 kDa) and bi- or tri-valency. RESULTS: We described a highly modular antibody-engineering platform for rapidly constructing synthetic, trivalent single chain variable fragments (Tri-scFv) using the SpyCatcher/SpyTag protein ligase system. We used this platform to construct an anti-human epidermal growth factor receptor 3 (HER3) Tri-scFv. We generated the anti-HER3 Tri-scFv by genetically fusing a SpyCatcher to the C-terminus of an anti-HER3 scFv and ligating it to a synthetic Tri-SpyTag peptide. The anti-HER3 Tri-scFv bound recombinant HER3 with an apparent KD of 2.67 nM, which is approximately 12 times lower than the KD of monomeric anti-HER3 scFv (31.2 nM). Anti-HER3 Tri-scFv also bound endogenous cell surface expressed HER3 stronger than the monomer anti-HER3 scFv. CONCLUSION: We used the SpyTag/SpyCatcher protein ligase system to ligate anti-HER3 scFv fused to a SpyCatcher at its C-termini to a Tri-SpyTag to construct Tr-scFv. This system allowed the construction of a Tri-scFv with all the scFv antigen-binding sites pointed outwards. The anti-HER3 Tri-scFv bound recombinant and endogenously expressed HER3 with higher functional affinity (avidity) than the monomeric anti-HER3 scFv. The Tri-scFv had the size, valency, and functional affinity that are desired for therapeutic and imaging applications. Use of the SpyTag/SpyCatcher protein ligase system allows Tri-scFvs to be rapidly constructed in a simple, modular manner, which can be easily applied to scFvs or other antibody fragments targeting other antigens.