Phonon signatures for polaron formation in an anharmonic semiconductor.

Mechanistic studies on lead halide perovskites (LHPs) in recent years have suggested charge carrier screening as partially responsible for long carrier diffusion lengths and lifetimes that are key to superior optoelectronic properties. These findings have led to the ferroelectric large polaron proposal, which attributes efficient charge carrier screening to the extended ordering of dipoles from symmetry-breaking unit cells that undergo local structural distortion and break inversion symmetry. It remains an open question whether this proposal applies in general to semiconductors with LHP-like anharmonic and dynamically disordered phonons. Here, we study electron-phonon coupling in Bi2O2Se, a semiconductor which bears resemblance to LHPs in ionic bonding, spin-orbit coupling, band transport with long carrier diffusion lengths and lifetimes, and phonon disorder as revealed by temperature-dependent Raman spectroscopy. Using coherent phonon spectroscopy, we show the strong coupling of an anharmonic phonon mode at 1.50 THz to photo-excited charge carriers, while the Raman excitation of this mode is symmetry-forbidden in the ground-state. Density functional theory calculations show that this mode, originating from the A1g phonon of out-of-plane Bi/Se motion, gains oscillator strength from symmetry-lowering in polaron formation. Specifically, lattice distortion upon ultrafast charge localization results in extended ordering of symmetry-breaking unit cells and a planar polaron wavefunction, namely a two-dimensional polaron in a three-dimensional lattice. This study provides experimental and theoretical insights into charge interaction with anharmonic phonons in Bi2O2Se and suggests ferroelectric polaron formation may be a general principle for efficient charge carrier screening and for defect-tolerant semiconductors.

Strain-Free Layered Semiconductors for 2D Transistors with On-State Current Density Exceeding 1.3 mA µm-1.

High-mobility and air-stable two-dimensional (2D) Bi2O2Se semiconductor holds promise as an alternative fast channel material for next-generation transistors. However, one of the key challenges remaining in 2D Bi2O2Se is to prepare high-quality crystals to fabricate the high-performance transistors with a high on-state current density. Here, we present the free-standing growth of strain-free 2D Bi2O2Se crystals. An ultrahigh Hall mobility of 160 000 cm2 V-1 s-1 is measured in strain-free Bi2O2Se crystals at 2 K, which enables the observation of Shubnikov-de Haas quantum oscillations and shows substantially higher (>4 times) mobility over previous in-plane 2D crystals. The fabricated 2D transistors feature an on-off current ratio of ∼106 and a record-high on-state current density of ∼1.33 mA µm-1, which is comparable to that of commercial Si and Ge n-type field-effect transistors (FETs) for similar channel length. Strain-free 2D Bi2O2Se provides a promising material platform for studying novel quantum phenomena and exploration of high-performance low-power electronics.

Ultrathin Free-Standing Nanosheets of Bi2O2Se: Room Temperature Ferroelectricity in Self-Assembled Charged Layered Heterostructure.

Ultrathin ferroelectric semiconductors with high charge carrier mobility are much coveted systems for the advancement of various electronic and optoelectronic devices. However, in traditional oxide ferroelectric insulators, the ferroelectric transition temperature decreases drastically with decreasing material thickness and ceases to exist below certain critical thickness owing to depolarizing fields. Herein, we show the emergence of an ordered ferroelectric ground state in ultrathin (∼2 nm) single crystalline nanosheets of Bi2O2Se at room temperature. Free-standing ferroelectric nanosheets, in which oppositely charged alternating layers are self-assembled together by electrostatic interactions, are synthesized by a simple, rapid, and scalable wet chemical procedure at room temperature. The existence of ferroelectricity in Bi2O2Se nanosheets is confirmed by dielectric measurements and piezoresponse force spectroscopy. The spontaneous orthorhombic distortion in the ultrathin nanosheets breaks the local inversion symmetry, thereby resulting in ferroelectricity. The local structural distortion and the formation of spontaneous dipole moment were directly probed by atomic resolution scanning transmission electron microscopy and density functional theory calculations.

Wafer-Scale Growth of Single-Crystal 2D Semiconductor on Perovskite Oxides for High-Performance Transistors.

Emerging two-dimensional (2D) semiconducting materials serve as promising alternatives for next-generation digital electronics and optoelectronics. However, large-scale 2D semiconductor films synthesized so far are typically polycrystalline with defective grain boundaries that could degrade their performance. Here, for the first time, wafer-size growth of a single-crystal Bi2O2Se film, which is a novel air-stable 2D semiconductor with high mobility, was achieved on insulating perovskite oxide substrates [SrTiO3, LaAlO3, (La, Sr)(Al, Ta)O3]. The layered Bi2O2Se epilayer exhibits perfect lattice matching and strong interaction with perovskite oxide substrates, which enable unidirectional alignment and seamless mergence of multiple seeds into single-crystal continuous films free of detrimental grain boundaries. The single-crystal Bi2O2Se thin films show excellent spatial homogeneity over the entire wafer and allow for the batch fabrication of high-performance field-effect devices with high mobilities of ∼150 cm2 V-1 s-1 at room temperature, excellent switching behavior with large on/off ratio of >105, and high drive current of ∼45 µA µm-1 at a channel length of ∼5 µm. Our work makes a step toward the practical applications of high-mobility semiconducting 2D layered materials and provides an alternative platform of oxide heterostructure to investigate novel physical phenomena.

Controlled Synthesis of High-Mobility Atomically Thin Bismuth Oxyselenide Crystals.

Non-neutral layered crystals, another group of two-dimensional (2D) materials that lack a well-defined van der Waals (vdWs) gap, are those that form strong chemical bonds in-plane but display weak out-of-plane electrostatic interactions, exhibiting intriguing properties for the bulk counterpart. However, investigation of the properties of their atomically thin counterpart are very rare presumably due to the absence of efficient ways to achieve large-area high-quality 2D crystals. Here, high-mobility atomically thin Bi2O2Se, a typical non-neutral layered crystal without a standard vdWs gap, was synthesized via a facial chemical vapor deposition (CVD) method, showing excellent controllability for thickness, domain size, nucleation site, and crystal-phase evolution. Atomically thin, large single crystals of Bi2O2Se with lateral size up to ∼200 µm and thickness down to a bilayer were obtained. Moreover, optical and electrical properties of the CVD-grown 2D Bi2O2Se crystals were investigated, displaying a size-tunable band gap upon thinning and an ultrahigh Hall mobility of >20000 cm2 V-1 s-1 at 2 K. Our results on the high-mobility 2D Bi2O2Se semiconductor may activate the synthesis and related fundamental research of other non-neutral 2D materials.

Layer-Controlled Growth of Single-Crystalline 2D Bi2O2Se Film Driven by Interfacial Reconstruction.

As semiconductor scaling continues to reach sub-nanometer levels, two-dimensional (2D) semiconductors are emerging as a promising candidate for the post-silicon material. Among these alternatives, Bi2O2Se has risen as an exceptionally promising 2D semiconductor thanks to its excellent electrical properties, attributed to its appropriate bandgap and small effective mass. However, unlike other 2D materials, growth of large-scale Bi2O2Se films with precise layer control is still challenging due to its large surface energy caused by relatively strong interlayer electrostatic interactions. Here, we present the successful growth of a wafer-scale (∼3 cm) Bi2O2Se film with precise thickness control down to the monolayer level on TiO2-terminated SrTiO3 using metal-organic chemical vapor deposition (MOCVD). Scanning transmission electron microscopy (STEM) analysis confirmed the formation of a [BiTiO4]1- interfacial structure, and density functional theory (DFT) calculations revealed that the formation of [BiTiO4]1- significantly reduced the interfacial energy between Bi2O2Se and SrTiO3, thereby promoting 2D growth. Additionally, spectral responsivity measurements of two-terminal devices confirmed a bandgap increase of up to 1.9 eV in monolayer Bi2O2Se, which is consistent with our DFT calculations. Finally, we demonstrated high-performance Bi2O2Se field-effect transistor (FET) arrays, exhibiting an excellent average electron mobility of 56.29 cm2/(V·s). This process is anticipated to enable wafer-scale applications of 2D Bi2O2Se and facilitate exploration of intriguing physical phenomena in confined 2D systems.

Achieving Ferroelectricity in a Centrosymmetric High-Performance Semiconductor by Strain Engineering.

Phase engineering by strain in 2D semiconductors is of great importance for a variety of applications. Here, a study of the strain-induced ferroelectric (FE) transition in bismuth oxyselenide (Bi2 O2 Se) films, a high-performance (HP) semiconductor for next-generation electronics, is presented. Bi2 O2 Se is not FE at ambient pressure. At a loading force of ≳400 nN, the piezoelectric force responses exhibit butterfly loops in magnitude and 180° phase switching. By carefully ruling out extrinsic factors, these features are attributed to a transition to the FE phase. The transition is further supported by the appearance of a sharp peak in optical second-harmonic generation under uniaxial strain. In general, solids with paraelectrics at ambient pressure and FE under strain are rare. The FE transition is discussed using first-principles calculations and theoretical simulations. The switching of FE polarization acts as a knob for Schottky barrier engineering at contacts and serves as the basis for a memristor with a huge on/off current ratio of 106 . This work adds a new degree of freedom to HP electronic/optoelectronic semiconductors, and the integration of FE and HP semiconductivity paves the way for many exciting functionalities, including HP neuromorphic computing and bulk piezophotovoltaics.

Self-Powered and Broadband Bismuth Oxyselenide/p-Silicon Heterojunction Photodetectors with Low Dark Current and Fast Response.

Inorganic nanomaterials such as graphene, black phosphorus, and transition metal dichalcogenides have attracted great interest in developing optoelectronic devices due to their efficient conversion between light and electric signals. However, the zero band gap nature, the unstable chemical properties, and the low electron mobility constrained their wide applications. Bismuth oxyselenide (Bi2O2Se) is gradually showing great research significance in the optoelectronic field. Here, we develop a bismuth oxyselenide/p-silicon (Bi2O2Se/p-Si) heterojunction and design a self-powered and broadband Bi2O2Se/p-Si heterojunction photodetector with an ultrafast response (2.6 µs) and low dark current (10-10 A without gate voltage regulation). It possesses a remarkable detectivity of 4.43 × 1012 cm Hz1/2 W-1 and a self-powered photoresponse characteristic at 365-1550 nm (ultraviolet-near-infrared). Meanwhile, the Bi2O2Se/p-Si heterojunction photodetector also shows high stability and repeatability. It is expected that the proposed Bi2O2Se/p-Si heterojunction photodetector will expand the applications of Bi2O2Se in practical integrated circuits in the field of material science, energy development, optical imaging, biomedicine, and other applications.

Excimer Formation in the Non-Van-Der-Waals 2D Semiconductor Bi2 O2 Se.

The layered semiconductor Bi2 O2 Se is a promising new-type 2D material that holds layered structure via electrostatic forces instead of van der Waals (vdW) attractions. Aside from the huge success in device performance, the non-vdW nature in Bi2 O2 Se with a built-in interlayer electric field has also provided an appealing platform for investigating unique photoexcited carrier dynamics. Here, experimental evidence for the observation of excimers in multilayer Bi2 O2 Se nanosheets via transient absorption spectroscopy is presented. It is found that the excimer formation is the primary decay pathway of photoexcited excitons and three-stage excimer dynamics with corresponding time scales are established. Excitation-fluence-dependent excimer dynamics further suggest that the excimer is diffusive and its formation can be simply described as excitons relaxed to an excimer geometry. This work indicates the outstanding promise of unique excitonic processes in Bi2 O2 Se, which may motivate novel device designs.

Step-Climbing Epitaxy of Layered Materials with Giant Out-of-Plane Lattice Mismatch.

Heteroepitaxy with large lattice mismatch remains a great challenge for high-quality epifilm growth. Although great efforts have been devoted to epifilm growth with an in-plane lattice mismatch, the epitaxy of 2D layered crystals on stepped substrates with a giant out-of-plane lattice mismatch is seldom reported. Here, taking the molecular-beam epitaxy of 2D semiconducting Bi2 O2 Se on 3D SrTiO3 substrates as an example, a step-climbing epitaxy growth strategy is proposed, in which the n-th (n = 1, 2, 3…) epilayer climbs the step with height difference from out-of-plane lattice mismatch and continues to grow the n+1-th epilayer. Step-climbing epitaxy can spontaneously relax and release the strain from the out-of-plane lattice mismatch, which ensures the high quality of large-area epitaxial films. Wafer-scale uniform 2D Bi2 O2 Se single-crystal films with controllable thickness can be obtained via step-climbing epitaxy. Most notably, one-unit-cell Bi2 O2 Se films (1.2 nm thick) exhibit a high Hall mobility of 180 cm2 V-1 s-1 at room temperature, which exceeds that of silicon and other 2D semiconductors with comparable thickness. As an out-of-plane lattice mismatch is generally present in the epitaxy of layered materials, the step-climbing epitaxy strategy expands the existing epitaxial growth theory and provides guidance toward the high-quality synthesis of layered materials.

Ultrasensitive 2D Bi2 O2 Se Phototransistors on Silicon Substrates.

2D materials are considered as intriguing building blocks for next-generation optoelectronic devices. However, their photoresponse performance still needs to be improved for practical applications. Here, ultrasensitive 2D phototransistors are reported employing chemical vapor deposition (CVD)-grown 2D Bi2 O2 Se transferred onto silicon substrates with a noncorrosive transfer method. The as-transferred Bi2 O2 Se preserves high quality in contrast to the serious quality degradation in hydrofluoric-acid-assisted transfer. The phototransistors show a responsivity of 3.5 × 104 A W-1 , a photoconductive gain of more than 104 , and a time response in the order of sub-millisecond. With back gating of the silicon substrate, the dark current can be reduced to several pA. This yields an ultrahigh sensitivity with a specific detectivity of 9.0 × 1013 Jones, which is one of the highest values among 2D material photodetectors and two orders of magnitude higher than that of other CVD-grown 2D materials. The high performance of the phototransistor shown here together with the developed unique transfer technique are promising for the development of novel 2D-material-based optoelectronic applications as well as integrating with state-of-the-art silicon photonic and electronic technologies.

Bismuth Oxysulfide and Its Polymer Nanocomposites for Efficient Purification.

The danger of toxic organic pollutants in both aquatic and air environments calls for high-efficiency purification material. Herein, layered bismuth copper oxychalcogenides, BiCuSO, nanosheets of high photocatalytic activity were introduced to the PVDF (Polyvinylidene Fluoride). The fibrous membranes provide an easy, efficient, and recyclable way to purify organic pollutant. The physical and photophysical properties of the BiCuSO and its polymer composite were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), ultraviolet-visible diffuse reflection spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), electron spin resonance (EPR). Photocatalysis of Congo Red reveals that the BiCuSO/PVDF shows a superior photocatalytic activity of a 55% degradation rate in 70 min at visible light. The high photocatalytic activity is attributed to the exposed active {101} facets and the triple vacant associates V B i ‴ V O • • V B i ‴ . By engineering the intrinsic defects on the surface of bismuth oxysulfide, high solar-driven photocatalytic activity can be approached. The successful fabrication of the bismuth oxysulfide and its polymer nanocomposites provides an easy and general approach for high-performance purification materials for various applications.