High-performance monolayer MoS2nanosheet GAA transistor.

In this article, a 0.7 nm thick monolayer MoS2nanosheet gate-all-around field effect transistors (NS-GAAFETs) with conformal high-κmetal gate deposition are demonstrated. The device with 40 nm channel length exhibits a high on-state current density of ~410µAµm-1with a large on/off ratio of 6 × 108at drain voltage = 1 V. The extracted contact resistance is 0.48 ± 0.1 kΩµm in monolayer MoS2NS-GAAFETs, thereby showing the channel-dominated performance with the channel length scaling from 80 to 40 nm. The successful demonstration of device performance in this work verifies the integration potential of transition metal dichalcogenides for future logic transistor applications.

A Vertically Integrated Junctionless Nanowire Transistor.

A vertically integrated junctionless field-effect transistor (VJ-FET), which is composed of vertically stacked multiple silicon nanowires (SiNWs) with a gate-all-around (GAA) structure, is demonstrated on a bulk silicon wafer for the first time. The proposed VJ-FET mitigates the issues of variability and fabrication complexity that are encountered in the vertically integrated multi-NW FET (VM-FET) based on an identical structure in which the VM-FET, as recently reported, harnesses a source and drain (S/D) junction for its operation and is thus based on the inversion mode. Variability is alleviated by bulk conduction in a junctionless FET (JL-FET), where current flows through the core of the SiNW, whereas it is not mitigated by surface conduction in an inversion mode FET (IM-FET), where current flows via the surface of the SiNW. The fabrication complexity is reduced by the inherent JL structure of the JL-FET because S/D formation is not required. In contrast, it is very difficult to dope the S/D when it is positioned at each floor of a tall SiNW with greater uniformity and with less damage to the crystalline structure of the SiNW in a VM-FET. Moreover, when the proposed VJ-FET is used as nonvolatile flash memory, the endurance and retention characteristics are improved due to the above-mentioned bulk conduction.

Vertically Integrated Multiple Nanowire Field Effect Transistor.

A vertically integrated multiple channel-based field-effect transistor (FET) with the highest number of nanowires reported ever is demonstrated on a bulk silicon substrate without use of wet etching. The driving current is increased by 5-fold due to the inherent vertically stacked five-level nanowires, thus showing good feasibility of three-dimensional integration-based high performance transistor. The developed fabrication process, which is simple and reproducible, is used to create multiple stiction-free and uniformly sized nanowires with the aid of the one-route all-dry etching process (ORADEP). Furthermore, the proposed FET is revamped to create nonvolatile memory with the adoption of a charge trapping layer for enhanced practicality. Thus, this research suggests an ultimate design for the end-of-the-roadmap devices to overcome the limits of scaling.

Compact Modeling of Advanced Gate-All-Around Nanosheet FETs Using Artificial Neural Network.

As the architecture of logic devices is evolving towards gate-all-around (GAA) structure, research efforts on advanced transistors are increasingly desired. In order to rapidly perform accurate compact modeling for these ultra-scaled transistors with the capability to cover dimensional variations, neural networks are considered. In this paper, a compact model generation methodology based on artificial neural network (ANN) is developed for GAA nanosheet FETs (NSFETs) at advanced technology nodes. The DC and AC characteristics of GAA NSFETs with various physical gate lengths (Lg), nanosheet widths (Wsh) and thicknesses (Tsh), as well as different gate voltages (Vgs) and drain voltages (Vds) are obtained through TCAD simulations. Subsequently, a high-precision ANN model architecture is evaluated. A systematical study on the impacts of ANN size, activation function, learning rate, and epoch (the times of complete pass through the entire training dataset) on the accuracy of ANN models is conducted, and a shallow neural network configuration for generating optimal ANN models is proposed. The results clearly show that the optimized ANN model can reproduce the DC and AC characteristics of NSFETs very accurately with a fitting error (MSE) of 0.01.

Leakage and Thermal Reliability Optimization of Stacked Nanosheet Field-Effect Transistors with SiC Layers.

In this work, we propose a SiC-NSFET structure that uses a PTS scheme only under the gate, with SiC layers under the source and drain, to improve the leakage current and thermal reliability. Punch-through stopper (PTS) doping is widely used to suppress the leakage current, but aggressively high PTS doping will cause additional band-to-band (BTBT) current. Therefore, the bottom oxide isolation nanosheet field-effect transistor (BOX-NSFET) can further reduce the leakage current and become an alternative to conventional structures with PTS. However, thermal reliability issues, like bias temperature instability (BTI), hot carrier injection (HCI), and time-dependent dielectric breakdown (TDDB), induced by the self-heating effect (SHE) of BOX-NSFET, become more profound due to the lower thermal conductivity of SiO2 than silicon. Moreover, the bottom oxide will reduce the stress along the channel due to the challenges associated with growing high-quality SiGe material on SiO2. Therefore, this method faces difficulties in enhancing the mobility of p-type devices. The comprehensive TCAD simulation results show that SiC-NSFET significantly suppresses the substrate leakage current compared to the conventional structure with PTS. In addition, compared to the BOX-NSFET, the stress reduction caused by the bottom oxide is avoided, and the SHE is mitigated. This work provides significant design guidelines for leakage and thermal reliability optimization of next-generation advanced nodes.

FS-iTFET: advancing tunnel FET technology with Schottky-inductive source and GAA design.

In this paper, we introduce a novel Forkshape nanosheet Inductive Tunnel Field-Effect Transistor (FS-iTFET) featuring a Gate-All-Around structure and a full-line tunneling heterojunction channel. The overlapping gate and source contact regions create a strong and uniform electric field in the channel. Furthermore, the metal-semiconductor Schottky junction in the intrinsic source region induces the required carriers without the need for doping. This innovative design achieves both a steeper subthreshold swing (SS) and a higher ON-state current (ION). Using calibration-based simulations with Sentaurus TCAD, we compare the performance of three newly designed device structures: the conventional Nanosheet Tunnel Field-Effect Transistor (NS-TFET), the Nanosheet Line-tunneling TFET (NS-LTFET), and the proposed FS-iTFET. Simulation results show that, compared to the traditional NS-TFET, the NS-LTFET with its full line-tunneling structure improves the average subthreshold swing (SSAVG) by 19.2%. More significantly, the FS-iTFET, utilizing the Schottky-inductive source, further improves the SSAVG by 49% and achieves a superior ION/IOFF ratio. Additionally, we explore the impact of Trap-Assisted Tunneling on the performance of the three different integrations. The FS-iTFET consistently demonstrates superior performance across various metrics, highlighting its potential in advancing tunnel field-effect transistor technology.

Impact of Stress and Dimension on Nanosheet Deformation during Channel Release of Gate-All-Around Device.

In this paper, nanosheet deformation during channel release has been investigated and discussed in Gate-All-Around (GAA) transistors. Structures with different source/drain size and stacked Si nanosheet lengths were designed and fabricated. The experiment of channel release showed that the stress caused serious deformation to suspended nanosheets. With the guidance of the experiment result, based on simulation studies using the COMSOL Multiphysics and Sentaurus tools, it is confirmed that the stress applied on the channel from source/drain plays an important role in nanosheet deformation during the fabrication process. The deformation of Si nanosheets would cause a serious degradation of the device performance due to an inability to control the work function of the metal gate. This study proposed that the uniformly stacked GAA nanosheets structure could be successfully demonstrated with suitable channel stress engineering provided by fitting S/D size and an appropriate channel length. The conclusions provide useful guidelines for future stacked GAA transistors' design and fabrication.

Interface Investigation on SiGe/Si Multilayer Structures: Influence of Different Epitaxial Process Conditions.

SiGe/Si multilayer is the core structure of the active area of gate-all-around field-effect transistors and semiconductor quantum computing devices. In this paper, high-quality SiGe/Si multilayers have been grown by a reduced-pressure chemical vapor deposition system. The effects of temperature, pressure, interface processing (dichlorosilane (SiH2Cl2, DCS) and hydrogen chloride (HCl)) on improving the transition thickness of SiGe to Si interfaces were investigated. The interface quality was characterized by transmission electron microscopy/atomic force microscopy/high-resolution X-ray diffraction methods. It was observed that limiting the migration of Ge atoms in the interface was critical for optimizing a sharp interface, and the addition of DCS was found to decrease the interface transition thickness. The change of the interfacial transition layer is not significant in the short treatment time of HCl. When the processing time of HCl is increased, the internal interface is optimized to a certain extent but the corresponding film thickness is also reduced. This study provides technical support for the acquisition of an abrupt interface and will have a very favorable influence on the performance improvement of miniaturized devices in the future.

Source/Drain Trimming Process to Improve Gate-All-Around Nanosheet Transistors Switching Performance and Enable More Stacks of Nanosheets.

A new S/D trimming process was proposed to significantly reduce the parasitic RC of gate-all-around (GAA) nanosheet transistors (NS-FETs) while retaining the channel stress from epitaxy S/D stressors at most. With optimized S/D trimming, the 7-stage ring oscillator (RO) gained up to 27.8% improvement of delay with the same power consumption, for a 3-layer stacked GAA NS-FETs. Furthermore, the proposed S/D trimming technology could enable more than 4-layer vertical stacking of nanosheets for GAA technology extension beyond 3 nm CMOS technology.

Power Reduction in Punch-Through Current-Based Electro-Thermal Annealing in Gate-All-Around FETs.

Device guidelines for reducing power with punch-through current annealing in gate-all-around (GAA) FETs were investigated based on three-dimensional (3D) simulations. We studied and compared how different geometric dimensions and materials of GAA FETs impact heat management when down-scaling. In order to maximize power efficiency during electro-thermal annealing (ETA), applying gate module engineering was more suitable than engineering the isolation or source drain modules.

Optimization of Structure and Electrical Characteristics for Four-Layer Vertically-Stacked Horizontal Gate-All-Around Si Nanosheets Devices.

In this paper, the optimizations of vertically-stacked horizontal gate-all-around (GAA) Si nanosheet (NS) transistors on bulk Si substrate are systemically investigated. The release process of NS channels was firstly optimized to achieve uniform device structures. An over 100:1 selective wet-etch ratio of GeSi to Si layer was achieved for GeSi/Si stacks samples with different GeSi thickness (5 nm, 10 nm, and 20 nm) or annealing temperatures (≤900 °C). Furthermore, the influence of ground-plane (GP) doping in Si sub-fin region to improve electrical characteristics of devices was carefully investigated by experiment and simulations. The subthreshold characteristics of n-type devices were greatly improved with the increase of GP doping doses. However, the p-type devices initially were improved and then deteriorated with the increase of GP doping doses, and they demonstrated the best electrical characteristics with the GP doping concentrations of about 1 × 1018 cm-3, which was also confirmed by technical computer aided design (TCAD) simulation results. Finally, 4 stacked GAA Si NS channels with 6 nm in thickness and 30 nm in width were firstly fabricated on bulk substrate, and the performance of the stacked GAA Si NS devices achieved a larger ION/IOFF ratio (3.15 × 105) and smaller values of Subthreshold swings (SSs) (71.2 (N)/78.7 (P) mV/dec) and drain-induced barrier lowering (DIBLs) (9 (N)/22 (P) mV/V) by the optimization of suppression of parasitic channels and device's structure.

Study of Silicon Nitride Inner Spacer Formation in Process of Gate-all-around Nano-Transistors.

Stacked SiGe/Si structures are widely used as the units for gate-all-around nanowire transistors (GAA NWTs) which are a promising candidate beyond fin field effective transistors (FinFETs) technologies in near future. These structures deal with a several challenges brought by the shrinking of device dimensions. The preparation of inner spacers is one of the most critical processes for GAA nano-scale transistors. This study focuses on two key processes: inner spacer film conformal deposition and accurate etching. The results show that low pressure chemical vapor deposition (LPCVD) silicon nitride has a good film filling effect; a precise and controllable silicon nitride inner spacer structure is prepared by using an inductively coupled plasma (ICP) tool and a new gas mixtures of CH2F2/CH4/O2/Ar. Silicon nitride inner spacer etch has a high etch selectivity ratio, exceeding 100:1 to Si and more than 30:1 to SiO2. High anisotropy with an excellent vertical/lateral etch ratio exceeding 80:1 is successfully demonstrated. It also provides a solution to the key process challenges of nano-transistors beyond 5 nm node.

Temperature dependence of electronic behaviors in quantum dimension junctionless thin-film transistor.

The high temperature dependence of junctionless (JL) gate-all-around (GAA) poly-Si thin-film transistors (TFTs) with 2-nm-thick nanosheet channel is compared with that of JL planar TFTs. The variation of SS with temperature for JL GAA TFTs is close to the theoretical value (0.2 mV/dec/K), owing to the oxidation process to form a 2-nm-thick channel. The bandgap of 1.35 eV in JL GAA TFTs by fitting experimental data exhibits the quantum confinement effect, indicating greater suppression of Ioff than that in JL planar TFTs. The measured [Formula: see text] of -1.34 mV/°C in JL GAA nanosheet TFTs has smaller temperature dependence than that of -5.01 mV/°C in JL planar TFTs.