Magnetic Hollow Fibers of Covalent Organic Frameworks (COF) for Pollutant Degradation and Adsorptive Removal.

The shaping of covalent organic frameworks (COFs), requiring the conversion of non-processible COF powders into applicable architectures with additional functionality, remains a challenge. Using pre-electrospun polymer fibers as a sacrificial template, herein, we report a green synthesis of an architecture in the form of COF hollow fibers with an inner layer of peroxidase-like iron oxide nanoparticles as a catalytic material. When compared to peroxidase-like pristine iron oxide nanoparticles, these COF hollow fibers demonstrate higher catalytic breakdown of crystal violet due to their peroxidase-like activity via advanced oxidation process. Furthermore, as a potential adsorbent, hollow COF fibers exhibit significantly effective adsorption capacity and removal efficiency of organic solvent and oil from water. Because of their magnetic nature, COF hollow fibers can be easily recovered and have exhibited high recycling stability for both catalytic dye degradation and organic solvent removal from water.

Optimization and chemical free fabrication of green synthesized iron nanoparticles as potential MRI contrast agent.

The current research article has investigated the synthesis and characterization of novel iron nanoparticles (INPs) from neem and betel leaves extract combination using response surface methodology-central composite design and coated with chitosan-curcumin (CCINPs) as a biocompatible and contrast agent for magnetic resonance imaging (MRI). The coating of INPs with chitosan and curcumin (CCINPs) was carried out using a simple, easy, chemical-free ultrasonication method and characteristics were confirmed by UV-visible (Vis) spectrophotometer (UV-Vis), Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscope, atomic force microscopy, and vibrating sample magnetometer. The biocompatibility of the particles was ensured by conducting hemolytic and cell viability assays. The nanoparticle was found to be nonhemolytic (<5%) up to 150 µg/mL for both INPs and CCINPs. The cell viability was stable (peripheral blood mononuclear cells-PBMCs) till 48 h at 150 µg/mL of INPs and CCINPs. Both the test results produced were found to be biocompatible and additionally, an in vitro MRI study of INPs and CCINPs demonstrated the efficiency of the nanoparticle as a negative contrast agent with enhanced contrast nature in CCINPs. Thus, overall results indicate that the green synthesized chemical-free novel CCINPs could be a potential candidate for a wide range of applications such as MRI, drug delivery, and in magnetic fluid hyperthermia.

Pore-scale investigation of the use of reactive nanoparticles for in situ remediation of contaminated groundwater source.

Nanoscale zero-valent iron (nZVI) particles have excellent capacity for in situ remediation of groundwater resources contaminated by a range of organic and inorganic contaminants. Chlorinated solvents are by far the most treated compounds. Studies at column, pilot, and field scales have reported successful decrease in contaminant concentration upon injection of nZVI suspensions in the contaminated zones. However, the field application is far from optimized, particularly for treatments at-or close to-the source, in the presence of residual nonaqueous liquid (NAPL). The knowledge gaps surrounding the processes that occur within the pores of the sediments hosting those contaminants at microscale limit our ability to design nanoremediation processes that are optimized at larger scales. This contribution provides a pore-scale picture of the nanoremediation process. Our results reveal how the distribution of the trapped contaminant evolves as a result of contaminant degradation and generation of gaseous products. We have used state-of-the-art four-dimensional (4D) imaging (time-resolved three-dimensional [3D]) experiments to understand the details of this degradation reaction at the micrometer scale. This contribution shows that the gas released (from the reduction reaction) remobilizes the trapped contaminant by overcoming the capillary forces. Our results show that the secondary sources of NAPL contaminations can be effectively treated by nZVI, not only by in situ degradation, but also through pore-scale remobilization (induced by the evolved gas phase). The produced gas reduces the water relative permeability to less than 1% and, therefore, significantly limits the extent of plume migration in the short term.

Magnetic Particle Imaging of Magnetotactic Bacteria as Living Contrast Agents Is Improved by Altering Magnetosome Arrangement.

Superparamagnetic iron oxide nanoparticles (SPIONs) can be used as imaging agents to differentiate between normal and diseased tissue or track cell movement. Magnetic particle imaging (MPI) detects the magnetic properties of SPIONs, providing quantitative and sensitive image data. MPI performance depends on the size, structure, and composition of nanoparticles. Magnetotactic bacteria produce magnetosomes with properties similar to those of synthetic nanoparticles, and these can be modified by mutating biosynthetic genes. The use of Magnetospirillum gryphiswaldense, MSR-1 with a mamJ deletion, containing clustered magnetosomes instead of typical linear chains, resulted in improved MPI signal and resolution. Bioluminescent MSR-1 with the mamJ deletion were administered into tumor-bearing and healthy mice. In vivo bioluminescence imaging revealed the viability of MSR-1, and MPI detected signals in livers and tumors. The development of living contrast agents offers opportunities for imaging and therapy with multimodality imaging guiding development of these agents by tracking the location, viability, and resulting biological effects.

Polyethylene glycol-modified mesoporous zerovalent iron nanoparticle as potential catalyst for improved reductive degradation of Congo red from wastewater.

In this study, bare zero-valent iron nanoparticles (nZVI) have been modified using polyethylene glycol (PEG) of various molecular weight in a facile technique. The synthesized nZVI modified with PEG, M.W. of 600 and 6000 was denoted by nZVI-PEG600 and nZVI-PEG6000, respectively, and compared their catalytic activity towards the reductive degradation of Congo red (CR) using NaBH4.The existence of PEG layer surrounds the nZVI core was confirmed by several characterization tools, such as XRD, FTIR, FESEM and TEM. Herein, both nZVI-PEG600 and nZVI-PEG6000 exhibited remarkable removal efficiencies of 89.6% and 99.2% within 14 min of reaction time. The optimum reaction parameters were found to be as follows: 0.2 g L-1 catalyst dose and initial dye concentration of 2 × 10-5 molL-1 etc. Kinetic studies of dye degradation were investigated which follow pseudo-1st-order kinetics. The TOC analysis confirmed the complete mineralization of CR dye by nZVI-PEG6000 nanocatalyst. GCMS analysis of plausible degraded products was performed to elucidate a probable mechanistic pathway of CR degradation. Further, we have investigated the degradation of two anionic dyes mixture, i.e., CR and methyl orange (MO) using best catalyst, i.e., nZVI-PEG6000.

Effect of Chemically Modified Carbon-Coated Iron Nanoparticles on the Structure of Human Atherosclerotic Plaques Ex Vivo and on Adipose Tissue in Chronic Experiment In Vivo.

The high mortality rate caused by atherosclerosis makes it necessary to constantly search for new and better treatments. In previous reports, chemically modified carbon-coated iron nanoparticles (Fe@C NPs) have been demonstrated a high biocompatibility and promising anti-plaque properties. To further investigate these effects, the interaction of these nanoparticles with the adipose tissue of Wistar rats (in vivo) and human atherosclerotic plaques (ex vivo) was studied. For the in vivo study, cobalt-chromium (CoCr) alloy tubes, which are used for coronary stent manufacturing, were prepared with a coating of polylactic acid (PLA) which contained either modified or non-modified Fe@C NPs in a 5% by weight concentration. The tubes were implanted into an area of subcutaneous fat in Wistar rats, where changes in the histological structure and functional properties of the surrounding tissue were observed in the case of coatings modified with Fe@C NPs. For the ex vivo study, freshly explanted human atherosclerotic plaques were treated in the physiological solution with doses of modified Fe@C NPs, with mass equal to 5% or 25% relative to the plaques. This treatment resulted in the release of cholesterol-like compounds from the surface of the plaques into the solution, thus proving a pronounced destructive effect on the plaque structure. Chemically modified Fe@C NPs, when used as an anti-atherosclerosis agent, were able to activate the activity of macrophages, which could lead to the destruction of atherosclerotic plaques structures. These findings could prove the fabrication of next-generation vascular stents with built-in anti-atherosclerotic agents.

Enhanced removal performance of zero-valent iron towards heavy metal ions by assembling Fe-tannin coating.

Heavy metals (HMs) pose serious threats to both human and environmental health and therefore, effective and low-cost techniques to remove HMs are urgently required. Here we report a facile Fe-tannin coating method for zero-valent iron (ZVI) including nanoparticles (nZVI) and foam (Fefoam), and demonstrate that the generated Fe-tannin coating would remove the inherent passive iron oxide shell of ZVI and provide channels for the galvanic replacement reaction between ZVI and HM ions. Electrochemical characterizations demonstrate that the Fe core of the modified ZVI materials could be easily oxidized and transfer electrons to HM ions owing to the facile mass transport and charge transfer. In 40 min, nZVI@Fe-TA exhibits excellent performances for Cd(II), Ni(II), Pb(II), Hg(II), Cu(II) and Cr(VI) removal, with the apparent removal rate constants of 0.083, 0.085, 0.083, 0.073, 0.092 and 0.078 min-1, respectively. It is found that the surface area normalized rate constants of nZVI@Fe-TA are 4-7 times higher than that of nZVI@Fe2O3 counterpart, suggesting that the improved HM removal reactivity of nZVI@Fe-TA is derived from the surface modification. Moreover, nZVI@Fe-TA has advantages in resisting interference and in the simultaneous removal of different HM ions. Under a 30 min hydraulic retention time, Fefoam@Fe-TA could remove 98% HMs in the successive process. For real electroplating wastewater, Fefoam@Fe-TA exhibits excellent performance for Cr(VI) and Ni(II) removal, producing effluent of stable quality that meets local emission regulation. This study provides a facile strategy to remove the inherent passive iron oxide shell and enhance the HM removal reactivity for ZVI materials.

Evaluation of the Physicochemical Properties of the Iron Nanoparticle Drug Products: Brand and Generic Sodium Ferric Gluconate.

Complex iron nanoparticle-based drugs are one of the oldest and most frequently administered classes of nanomedicines. In the US, there are seven FDA-approved iron nanoparticle reference drug products, of which one also has an approved generic drug product (i.e., sodium ferric gluconate (SFG)). These products are indicated for the treatment of iron deficiency anemia and are administered intravenously. On the molecular level, iron nanomedicines are colloids composed of an iron oxide core with a carbohydrate coating. This formulation makes nanomedicines more complex than conventional small molecule drugs. As such, these products are often referred to as nonbiological complex drugs (e.g., by the nonbiological complex drugs (NBCD) working group) or complex drug products (e.g., by the FDA). Herein, we report a comprehensive study of the physiochemical properties of the iron nanoparticle product SFG. SFG is the single drug for which both an innovator (Ferrlecit) and generic product are available in the US, allowing for comparative studies to be performed. Measurements focused on the iron core of SFG included optical spectroscopy, inductively coupled plasma mass spectrometry (ICP-MS), X-ray powder diffraction (XRPD), 57Fe Mössbauer spectroscopy, and X-ray absorbance spectroscopy (XAS). The analysis revealed similar ferric-iron-oxide structures. Measurements focused on the carbohydrate shell comprised of the gluconate ligands included forced acid degradation, dynamic light scattering (DLS), analytical ultracentrifugation (AUC), and gel permeation chromatography (GPC). Such analysis revealed differences in composition for the innovator versus the generic SFG. These studies have the potential to contribute to future quality assessment of iron complex products and will inform on a pharmacokinetic study of two therapeutically equivalent iron gluconate products.

Architectural Genesis of Metal(loid)s with Iron Nanoparticle in Water.

Reactions of core-shell iron nanoparticles with metal(loid)s in water can form an array of nanostructures such as Ag-seed/dendrite, As-subshell, U-yolk, Co-hollowshell, and Cs-spot. Nonetheless, there is a lack of profound understanding in the genesis of these amazing geometries. Herein, we propose a concept to unravel the interdiffusion between the core-shell iron nanoparticle and metal(loid)s, where several key interactions including the Kirkendall effect, metal(loid) character effect, and reaction condition effect are involved in determining the structure of the final solid reaction products. Particularly, the architectural growths of metal(loid)s with iron nanoparticles in water can be manipulated mutually or singly by the following factors: standard redox potential difference, magnetic property, electrical charge and conductivity, as well as the iron (hydr)oxide shell structure under different solution chemistry and operation conditions. This contribution provides a theoretical basis to rationalize the architectural genesis of various metal(loid)s with iron nanoparticles, which will benefit the real practice for synthesizing functional iron-based nanoparticles and recovering the rare/precious metal(loid)s by iron nanoparticles from water.

Physiological effects of zero-valent iron nanoparticles in rhizosphere on edible crop, Medicago sativa (Alfalfa), grown in soil.

We investigated the effects of nanoscale zero-valent iron (nZVI) that has been widely used for groundwater remediation on a terrestrial crop, Medicago sativa (Alfalfa), and comprehensively addressed its development and growth in soil culture. Root lengths, chlorophyll, carbohydrate and lignin contents were compared, and no physiological phytotoxicity was observed in the plants. In the roots, using an omics-based analytical, we found evidence of OH radical-induced cell wall loosening from exposure to nZVI, resulting in increased root lengths that were approximately 1.5 times greater than those of the control. Moreover, germination index (GI) was employed to physiologically evaluate the impact of nZVI on germination and root length. In regard to chlorophyll concentration, nZVI-treated alfalfa exhibited a higher value in 20-day-old seedlings, whereas the carbohydrate and lignin contents were slightly decreased in nZVI-treated alfalfa. Additionally, evidence for translocation of nZVI into plant tissues was also found. Vibrating sample magnetometry on shoots revealed the translocation of nZVI from the root to shoot. In this study, using an edible crop as a representative model, the potential impact of reactive engineered nanomaterials that can be exposed to the ecosystem on plant is discussed.

Characterization, Quantification, and Determination of the Toxicity of Iron Oxide Nanoparticles to the Bone Marrow Cells.

Iron oxide nanoparticles (IONPs) have been used to develop iron supplements for improving the bioavailability of iron in patients with iron deficiency, which is one of the most serious nutritional deficiencies in the world. Accurate information about the characteristics, concentration, and cytotoxicity of IONPs to the developmental and reproductive cells enables safe use of IONPs in the supplement industry. The objective of this study was to analyze the physicochemical properties and cytotoxicity of IONPs in bone marrow cells. We prepared three different types of iron samples (surface-modified iron oxide nanoparticles (SMNPs), IONPs, and iron citrate) and analyzed their physicochemical properties such as particle size distribution, zeta potential, and morphology. In addition, we examined the cytotoxicity of the IONPs in various kinds of bone marrow cells. We analyzed particle size distribution, zeta potential, iron levels, and subcellular localization of the iron samples in bone marrow cells. Our results showed that the iron samples were not cytotoxic to the bone marrow cells and did not affect the expression of cell surface markers and lipopolysaccharide (LPS)-induced the secretion of cytokines by murine bone marrow-derived dendritic cells (BMDCs). Our results may be used to investigate the interactions between nanoparticles and cells and tissues and the developmental toxicity of nanoparticles.

Cross-Modal Imaging Reveals Nanoparticle Uptake Dynamics in Hematopoietic Bone Marrow during Inflammation.

Nanoparticles have been employed to elucidate the innate immune cell biology and trace cells accumulating at inflammation sites. Inflammation prompts innate immune cells, the initial responders, to undergo rapid turnover and replenishment within the hematopoietic bone marrow. Yet, we currently lack a precise understanding of how inflammation affects cellular nanoparticle uptake at the level of progenitors of innate immune cells in the hematopoietic marrow. To bridge this gap, we aimed to develop imaging tools to explore the uptake dynamics of fluorescently labeled cross-linked iron oxide nanoparticles in the bone marrow niche under varying degrees of inflammation. The inflammatory models included mice that received intramuscular lipopolysaccharide injections to induce moderate inflammation and streptozotocin-induced diabetic mice with additional intramuscular lipopolysaccharide injections to intensify inflammation. In vivo magnetic resonance imaging (MRI) and fluorescence imaging revealed an elevated level of nanoparticle uptake at the bone marrow as the levels of inflammation increased. The heightened uptake of nanoparticles within the inflamed marrow was attributed to enhanced permeability and retention with increased nanoparticle intake by hematopoietic progenitor cells. Moreover, intravital microscopy showed increased colocalization of nanoparticles within slowly patrolling monocytes in these inflamed hematopoietic marrow niches. Our discoveries unveil a previously unknown role of the inflamed hematopoietic marrow in enhanced storage and rapid deployment of nanoparticles, which can specifically target innate immune cells at their production site during inflammation. These insights underscore the critical function of the hematopoietic bone marrow in distributing iron nanoparticles to innate immune cells during inflammation. Our findings offer diagnostic and prognostic value, identifying the hematopoietic bone marrow as an imaging biomarker for early detection in inflammation imaging, advancing personalized clinical care.

Continuous gas-phase synthesis of iron nanoparticles at ambient conditions with controllable size and polydispersity.

HYPOTHESIS: By altering aerosol growth dynamics with unipolar charges, one can obtain aerosols with narrow particles size distributions, a highly desirable feature in applications of functional nanoparticles. EXPERIMENTS: Unlike liquid colloid systems, aerosol particles in the free molecular regime undergo coarsening due to Brownian coagulation and will eventually attain a self-preserving size distribution with a typical geometric standard deviation of 1.46 - 1.48. We developed a novel continuous one-step aerosol synthesis reactor that produces iron nanoparticles from ferrocene at ambient conditions, which confines the site of precursor breakdown and particle formation in the downstream vicinity of a positive corona discharge. FINDINGS: We demonstrated that the particle size could be controlled within 3 - 10 nm with a suppressed geometric standard deviation (1.15 - 1.35). The as-produced iron nanoparticles were successfully used as catalyst for the growth of single-walled carbon nanotubes with a narrow diameter range. With a transient aerosol dynamics model, we showed that a fraction (as small as 0.1%) of unipolar-charged particles could have a significant impact on the aerosol growth dynamics, which eventually results in a narrower particle size distribution with smaller size and higher number concentrations.

Highly efficient catalytic degradation of organic dyes using iron nanoparticles synthesized with Vernonia Amygdalina leaf extract.

Today, nanoscience explores the potential of nanoparticles due to their extraordinary properties compared to bulk materials. The synthesis of metal nanoparticles using plant extracts is a very promising method for environmental remediation, which gets global attention due to pollution-led global warming. In the present study, iron nanoparticles (FeNPs) were successfully synthesized by the green method using Vernonia amygdalina plant leaf extract as a natural reducing and capping agent. Biosynthesized FeNPs were characterized with different analytical techniques such as UV-visible, FT-IR, XRD, and SEM. The analysis revealed the formation of amorphous FeNPs with an irregular morphology and non-uniform distribution in size and shape. The average particle size was approximately 2.31 µm. According to the catalytic degradation investigation, the FeNPs produced via the green approach are highly effective in breaking down both CV and MB into non-toxic products, with a maximum degradation efficiency of 97.47% and 94.22%, respectively, when the right conditions are met. The kinetics study exhibited a high correlation coefficient close to unity (0.999) and (0.995) for the degradation of MB and CV, respectively, for the zero-order pseudo-kinetics model, which describes the model as highly suitable for the degradation of both dyes by FeNPs compared to other models. The reusability and stability of biosynthesized nano-catalysts were studied and successfully used as efficient catalysts with a slight decrease in the degradation rate more than four times. The results from this study illustrate that green synthesized FeNPs offer a cost-effective, environmentally friendly, and efficient means for the catalytic degradation of organic dyes.

Enhanced anaerobic digestion performance of food waste by zero-valent iron and iron oxides nanoparticles: Comparative analyses of microbial community and metabolism.

The effects of zero-valent iron (ZVI) and iron oxides nanoparticles on anaerobic digestion (AD) performance of food waste (FW) were comparably clarified in this study. Results indicated that the nanoparticles supplement effectively enhanced the methane yields. As observed, these nanoparticles accelerated organics transformation and alleviated acidification process. Also, the enriched total methanogens and functional bacteria (e.g., Proteiniphilum) were consistent with the promotion of oxidative phosphorylation, citrate cycle, coenzymes biosynthesis and the metabolisms of amino acid, carbohydrate, methane. Additionally, these nanoparticles stimulated electron transfer potential via enriching syntrophic genera (e.g., Geobacter, Syntrophomonas), primary acetate-dependent methanogens (Methanosaeta, Methanosarcina) and related functions (pilus assembly protein, ferredoxins). By comparison, ZVI nanoparticle presented the excellent performance on methanogenesis. This study provides comprehensive understanding of the methanogenesis facilitated by ZVI and iron oxides nanoparticles through the enhancement of key microbes and microbial metabolisms, while ZVI is an excellent option for promoting the methane production.

α-Hydroxy acids modified ß-cyclodextrin capped iron nanocatalyst for rapid reduction of nitroaromatics: A sonochemical approach.

This study reports a sonochemical approach for the synthesis and catalytic performance of zerovalent iron nanoparticles (nZVI) capped with two cyclodextrin (CD) crosslinked polymers derived from Lactic acid and Citric acid (CDLA and CDCA respectively). The polymers and the catalysts were characterized by NMR, FTIR, HRTEM, DLS, Zeta potential, FESEM, EDAX, VSM, XRD, XPS, TGA analysis. The catalysts proved to be sustainable and recyclable for rapid sonochemical reduction of nitroaromatics under ambient conditions. The isolated yield of the derivatives was found to be greater than 90%. The results suggest excellent dispersibility, stability, high iron content and smaller size of CDLA polymer capped nZVI compared to CDCA capped nZVI, leading to two-fold higher catalytic activity. The effect of various crucial catalysis parameters was investigated and optimized. The scope of the reaction was extended to other nitroaromatics under the optimized conditions. Being magnetically separable, the cost effective and non-toxic catalysts exhibited high recycling efficiency (~13 cycles), high turnover number (TON) and turnover frequency (TOF). The recyclable catalysts could be low-cost and sustainable options for organic transformation in water via sonochemical approach in aqueous medium.

Characterization of iron reducibility of soy protein amyloid fibrils and their applications in iron fortification.

Iron deficiency is a common nutritional disorder worldwide. Iron fortification of food is an effective strategy to control iron deficiency anemia (IDA), however, traditional iron fortificants usually provoke undesirable organoleptic changes or have limited colloid stability. In this research, we investigated iron reducibility of soy protein amyloid fibrils made from soy protein isolates (SPI), soy ß-conglycinin (7S) and soy glycinin (11S), and explored their applications in iron fortification. All three protein fibrils showed iron reducibility. The reducibility was utilized to generate fibril-iron nanoparticle composites. The iron reducibility was affected by fibril concentration, degree of fibrillation and reducing amino acid composition. We identified 11S had the most significant effect on reducing Fe (III) to more bioavailable Fe (II) state, whereas 7S showed the optimal result for generation of iron nanoparticle on fibrils in situ. The resulted fibril-iron nanoparticle hybrids showed high dispersibility in various liquid foods, without distinct color change.

The mechanism changes during bisphenol A degradation in three iron functionalized biochar/peroxymonosulfate systems: The crucial roles of iron contents and graphitized carbon layers.

Three magnetic biochar nanocomposites named as C800-1, C800-2 and C800-3 with increased iron deposition amount, decreased graphitized degree and gradually destroyed graphitized carbon layers, respectively, were prepared using potassium ferrate as activator and corn straw as biomass. C800-1, C800-2 and C800-3 exhibited much different bisphenol A degradation effect in presence of peroxymonosulfate among which C800-3 owned the best catalytic performance. For the degradation mechanism, the dominant role of electron transfer pathway was gradually replaced by the SO4•- pathway with the increase of iron amount and the destruction of graphitized carbon layers. This work would provide a simple and feasible method, namely changing the ratio of potassium ferrate and biochar, to manipulate the radical and nonradical degradation pathway in PMS-based organic wastewater purification.

Chemically Modified Biomimetic Carbon-Coated Iron Nanoparticles for Stent Coatings: In Vitro Cytocompatibility and In Vivo Structural Changes in Human Atherosclerotic Plaques.

Atherosclerosis, a systematic degenerative disease related to the buildup of plaques in human vessels, remains the major cause of morbidity in the field of cardiovascular health problems, which are the number one cause of death globally. Novel atheroprotective HDL-mimicking chemically modified carbon-coated iron nanoparticles (Fe@C NPs) were produced by gas-phase synthesis and modified with organic functional groups of a lipophilic nature. Modified and non-modified Fe@C NPs, immobilized with polycaprolactone on stainless steel, showed high cytocompatibility in human endothelial cell culture. Furthermore, after ex vivo treatment of native atherosclerotic plaques obtained during open carotid endarterectomy surgery, Fe@C NPs penetrated the inner structures and caused structural changes of atherosclerotic plaques, depending on the period of implantation in Wistar rats, serving as a natural bioreactor. The high biocompatibility of the Fe@C NPs shows great potential in the treatment of atherosclerosis disease as an active substance of stent coatings to prevent restenosis and the formation of atherosclerotic plaques.

Aging of zero-valent iron-based nanoparticles in aqueous environment and the consequent effects on their reactivity and toxicity.

A fundamental understanding of the long-term fate of nanoscale zero-valent iron (nZVI)-based particles in aqueous environment and the corresponding impacts on their reactivity and toxicity is essential for the responsible use and management of the nanoparticles in environmental applications. This paper comprehensively reviews the physicochemical transformations of nZVI-based particles and the consequent effects on the particle's reactivity and toxicity. The corrosions of nZVI in water under both anaerobic and aerobic conditions are summarized. The transformation of contaminant-bearing nZVI is also discussed. Besides, the factors influencing the transformation of nZVI (i.e., pH, typical anions and cations, natural organic matter, surface stabilizers, bimetal decoration, and sulfidation treatment) are summarized and discussed. In addition, the effects of particle aging on its reactivity and toxicity are discussed. Generally, the aging of nZVI-based particles would have negative impact on the removal of contaminants, especially for the degradation of organic pollutants. However, the aging process of nZVI-based particles would cause a significant reduction in their toxicity. It is suggested that the nZVI-based particles would finally transform to less toxic or benign materials (i.e., iron (oxyhydr)oxides) over time. Finally, future perspectives are proposed to better quantify and predict the transformation of nZVI-based particles in aqueous environment. PRACTITIONER POINTS: The corrosion rates and products of nZVI in water varied much under anaerobic and aerobic conditions. Typical anions and cations, natural organic matter, and iron types are critical factors influencing the physicochemical transformation of nZVI. The aging of nZVI would have negative impact its reactivity, especially for the degradation of organic pollutants. Although the fresh nZVI exhibits obvious toxicity, the aging process would cause a significant reduction in its toxicity.