A molecularly imprinting photoelectrochemical sensor based on Bi2O2S-sensitized perovskite Cs2AgBiBr6 for sarcosine determination.

An original molecular imprinting photoelectrochemical (PEC) sensor for sarcosine detection based on stable lead-free inorganic halide double perovskite Cs2AgBiBr6 is proposed. Cs2AgBiBr6 as a lead-free halide perovskite material possesses several positive optoelectronic properties for PEC analysis, such as long-lived component to the charge-carrier lifetime, and strong absorption of visible light. At the same time, two-dimensional materials also offer excellent electronic and mechanical properties; thus, Bi2O2S was used and combined with Cs2AgBiBr6 to provide a stable and large photocurrent, which also benefits from the  stability of perovskite Cs2AgBiBr6. Based on this novel PEC assay, the detection range for sarcosine was between 0.005 and 5000 ng/mL with a low detection limit of 0.002 ng/mL. This work also improved the adhibition of metal halide perovskite in analytical chemistry field, providing a novel way for other small molecule detection.

Polyvinylidene Fluoride-Based Nanowire-Imprinted Membranes with High Flux for Efficient and Selective Separation of Artemisinin/Artemether.

A traditional phase transformation method is commonly used to prepare molecular imprinting membranes for selective separation. However, traditional molecularly imprinted polymers are mostly micron-sized particles, and the imprinting sites in their membrane are easily embedded, leading to a reduced adsorption capacity and decreased selectivity. In this study, an ultra-long nanowire with a diameter of about 15 nm was synthesized for the separation of artemisinin (ART), and its adsorption capacity was as high as 198.29 mg g-1 after imprinting polymerization. Molecular imprinting membranes were prepared, using polyvinylidene fluoride (PVDF), polyethersulfone (PES), and polysulfone (PSF) as the membrane matrix, for comparison. The average membrane pore size of PVDF-MIM was about 480 nm, and PVDF-MIM had the highest adsorption capacity (69 mg g-1) for ART. The optimal flow rate for PVDF-MIM's dynamic adsorption of ART was 7 mL min-1. Under this optimal flow rate, selectivity experiments were carried out to obtain the separation factor of PVDF-MIM (α = 8.37), which was much higher than the corresponding values of PES-MIM and PSF-MIM. In addition, the hydrophobicity and low flux of PES-MIM and PSF-MIM lead to higher non-specific adsorption. The hydrophobicity of PVDF-MIM is lower than that of PES-MIM and PSF-MIM, which greatly reduces the non-specific adsorption of the membrane, thus increasing the selectivity of the membranes. Therefore, the effective density of the imprinting sites in the pores and the membrane structure are the main factors determining the efficient separation of molecularly imprinted membranes.

Photonic crystal sensor for melamine based on magnetic molecularly imprinted nanoparticles self-assembled with an amphiphilic random copolymer.

Magnetic molecularly imprinted nanoparticles (MMINPs) were obtained with a one-step process through miniemulsion self-assembly using an amphiphilic random copolymer as both an emulsifier and MMINP coating, oleic acid-modified magnetite nanoparticles as magnetic cores, and melamine (MEL) as the template molecule. MMINPs were assembled under an external magnetic field to construct photonic crystal (PC) sensor for naked-eye detection of MEL. The MMINPs were characterized by FT-IR, TEM, TGA, and VSM. The analytical performances of the magnetic molecularly imprinted PC sensor for MEL (MEL-MMIPCs) were investigated with respect to sensitivity, response time, selectivity, and stability. As the MEL concentration increases from 1.0 to 1.0 × 106 µg/l, the reflection wavelength of MEL-MMIPCs shifted from 497 to 709 nm, and was linear with the logarithm of MEL concentration in this range. The detection limit was 0.21 µg/l (S/N = 3) and response time was within 30 s. The MEL-MMIPC sensor had an imprinting factor of 5.09, and selectivity factors for the analogs cyanuric acid and atrazine were 8.76 and 5.75, respectively, indicating the high sensitivity and selectivity. After 10 cycles of elution/response, MEL-MMIPCs still had a good ability to recognize MEL.

A Capillary Electrophoresis Method Based on Molecularly Imprinted Solid-Phase Extraction for Selective and Sensitive Detection of Histamine in Foods.

In this study, a sensitive capillary electrophoresis (CE) method based on molecularly imprinted solid-phase extraction (MISPE) was proposed to determine histamine in foods. A molecularly imprinted polymer (MIP) synthesized by bulk polymerization was used as the MISPE adsorbent for the selective extraction of histamine. Under the optimal conditions, the MISPE-CE method possessed good linearity for histamine detection in the concentration range of 0.1-100.0 µg/L. The limit of detection and limit of quantification of the method were calculated to be 0.087 µg/L and 0.29 µg/L, respectively. The histamine in spiked rice vinegar and liquor samples were detected by the developed method with recoveries of 92.63-111.00%. The histamine contents in fish, prawn, pork, chicken breast and soy sauce samples were determined using the developed method and a high-performance liquid chromatography method, with no significant difference found between the two methods.

Applications of Molecular Imprinting Technology in the Study of Traditional Chinese Medicine.

Traditional Chinese medicine (TCM) is one of the most internationally competitive industries. In the context of TCM modernization and internationalization, TCM-related research studies have entered a fast track of development. At the same time, research of TCM is also faced with challenges, such as matrix complexity, component diversity and low level of active components. As an interdisciplinary technology, molecular imprinting technology (MIT) has gained popularity in TCM study, owing to the produced molecularly imprinted polymers (MIPs) possessing the unique features of structure predictability, recognition specificity and application universality, as well as physical robustness, thermal stability, low cost and easy preparation. Herein, we comprehensively review the recent advances of MIT for TCM studies since 2017, focusing on two main aspects including extraction/separation and purification and detection of active components, and identification analysis of hazardous components. The fundamentals of MIT are briefly outlined and emerging preparation techniques for MIPs applied in TCM are highlighted, such as surface imprinting, nanoimprinting and multitemplate and multifunctional monomer imprinting. Then, applications of MIPs in common active components research including flavonoids, alkaloids, terpenoids, glycosides and polyphenols, etc. are respectively summarized, followed by screening and enantioseparation. Related identification detection of hazardous components from TCM itself, illegal addition, or pollution residues (e.g., heavy metals, pesticides) are discussed. Moreover, the applications of MIT in new formulation of TCM, chiral drug resolution and detection of growing environment are summarized. Finally, we propose some issues still to be solved and future research directions to be expected of MIT for TCM studies.

A photoelectrochemical sensor based on Z-Scheme TiO2@Au@CdS and molecularly imprinted polymer for uric acid detection.

A novel photoelectrochemical (PEC) sensor based on "Z-scheme" TiO2@Au@CdS and molecularly imprinted polymer (MIP) was developed for the non-invasive detection of uric acid (UA). The "Z-scheme" material, consisting of an electron-transfer system (Au) and two isolated photochemical systems (CdS, TiO2), was synthesized by chemical deposition method and it worked as a substrate for electro-polymerization of MIP. Due to the high photoelectric conversion efficiency provided by TiO2@Au@CdS and specific imprinting effect afforded by MIP, the sensor displayed desirable sensing performance with the merits of sensitivity, selectivity, repeatability, and stability. The linear range for UA detection is from 1 nM to 9 µM with the detection limit of 0.3 nM (S/N = 3). Moreover, the assay was successfully utilized to measure UA in human tears and offered a reliable result. The incorporation of MIP and "Z-scheme" material into a PEC sensor system is expected to provide a promising strategy for detecting other small molecules.

Molecularly imprinted photoelectrochemical sensor for detecting tetrabromobisphenol A in indoor dust and water.

The gradual emissions of tetrabromobisphenol A (TBBPA) from the primitive recycling of E-waste create human health threats, which urgently require to develop an efficient, rapid yet simple detection method. The present study conducts a highly sensitive molecularly imprinted photoelectrochemical sensor (MIPES) containing molecularly imprinted (MI)-TiO2, Au, and reduced graphene oxide for the trace detection of TBBPA in indoor dust and surface water from an E-waste recycling area. The photocurrent response is used to evaluate the sensing performance of the MIPES toward TBBPA detection. The working potential for amperometry is 0.48 V. The wavelength range for photoelectrochemical detection is 320-780 nm. The sensor shows a detection range of 1.68 to 100 nM with a low limit of detection of 0.51 nM (LOD = 3 sb/S) and a limit of quantification of 1.68 nM (LOQ = 3.3 LOD). In addition, the MIPES sensor exhibits rapid, excellent reproducibility, selectivity, and long-term stability toward TBBPA detection. The relative standard deviation of three measurements for real samples is less than 7.0%, and the recovery range is 90.0-115%. The surface of molecular imprinting contributes to the high charge separation and sensing photocurrent response of TBBPA, which is confirmed by single-particle photoluminescence spectroscopy. The present study provides a new facile sensor with highly sensitive yet rapid response to detect environmental pollutants in E-waste by using the MIPES.

Molecular Imprinting Technology for Determination of Uric Acid.

The review focuses on the overview of electrochemical sensors based on molecularly imprinted polymers (MIPs) for the determination of uric acid. The importance of robust and precise determination of uric acid is highlighted, a short description of the principles of molecular imprinting technology is presented, and advantages over the others affinity-based analytical methods are discussed. The review is mainly concerned with the electro-analytical methods like cyclic voltammetry, electrochemical impedance spectroscopy, amperometry, etc. Moreover, there are some scattered notes to the other electrochemistry-related analytical methods, which are capable of providing additional information and to solve some challenges that are not achievable using standard electrochemical methods. The significance of these overviewed methods is highlighted. The overview of the research that is employing MIPs imprinted with uric acid is mainly targeted to address these topics: (i) type of polymers, which are used to design uric acid imprint structures; (ii) types of working electrodes and/or other parts of signal transducing systems applied for the registration of analytical signal; (iii) the description of the uric acid extraction procedures applied for the design of final MIP-structure; (iv) advantages and disadvantages of electrochemical methods and other signal transducing methods used for the registration of the analytical signal; (vi) overview of types of interfering molecules, which were analyzed to evaluate the selectivity; (vi) comparison of analytical characteristics such as linear range, limits of detection and quantification, reusability, reproducibility, repeatability, and stability. Some insights in future development of uric acid sensors are discussed in this review.

Molecularly imprinted polymers-A closer look at the control polymer used in determining the imprinting effect: A mini review.

Molecular recognition displayed by naturally occurring receptors has continued to inspire new innovations aimed at developing systems that can mimic this natural phenomenon. Since 1930s, a technology called molecular imprinting for producing biomimetic receptors has been in place. In this technology, tailor made binding sites that selectively bind a given target analyte (also called template) are incorporated in a polymer matrix by polymerizing functional monomers and cross-linking monomers around a target analyte followed by removal of the analyte to leave behind cavities specific to the analyte. The success of the imprinting process is defined by two main figures of merit, that is, the imprinting factor, and selectivity, which are determined by comparing the amount of target analyte or structural analogue bound by the molecularly imprinted polymer (MIP) and the nonimprinted polymer (NIP). NIP is a control synthesized alongside the MIP but in the absence of the template. However, questions arise on whether these figures of merit are reliable measures of the imprinting effect because of the significant differences between the MIP and the NIP in terms of their physical and chemical characteristics. Therefore, this review critically looks into this subject, with a view of defining the best approaches for determining the imprinting effect.

Multiplexed derivatization strategy-based dummy molecularly imprinted polymers as sorbents for magnetic dispersive solid phase extraction of globotriaosylsphingosine prior to UHPLC-MS/MS quantitation.

A new series of 9-plex chemical isotope-labeling reagents, levofloxacin-based mass tags (LMTs) named as LMT359, 360, 361, 362, 363, 373, 375, 376, and 378, was firstly designed and synthesized for the high-throughput labeling of globotriaosylsphingosine (lyso-Gb3), a disease biomarker of Fabry disease. Creatively based on derivatization strategy-dummy template technique, dummy magnetic molecularly imprinted polymers (DMMIPs) were designed and prepared using LMT387-labeled lyso-Gb3 as a dummy template. The novel DMMIP material was used as sorbents for magnetic dispersive solid-phase extraction of 9-plexed LMT derivatives of lyso-Gb3 from equally mixed derivatization solutions. The enriched 8-plexed lyso-Gb3 derivatives from 8 real samples were quantified by ultra-high-performance liquid chromatography tandem mass spectrometry in a single run using simultaneously extracted LMT359-labeled standard lyso-Gb3 as internal standards. DMMIPs were characterized by using the transmission electron microscope (TEM), Fourier transform infrared, X-ray photoelectron spectroscopy, and some other characterization techniques. TEM micrograph showed that the prepared DMMIPs had an apparent imprinting layer. Triple-recognition abilities of DMMIPs towards LMT-lyso-Gb3 mainly rely on the hydrogen bonding, electrostatic attraction, hydrophobic interaction, and boronate affinity. The imprinting factor of DMMIPs towards LMT-lyso-Gb3 was 5.1. This method shows the advantages of high selectivity (triple recognition), high sensitivity, high accuracy (recovery 93.5-108.8%), and high throughput (8 samples in a single run). The proposed method was successfully applied to the determination of lyso-Gb3 in plasma samples with spiked recoveries in the range of 95.0-102.4%. This indicates that the method is promising in bioanalysis and medical testing of lyso-Gb3 in the future. Graphical abstract Synthesis of multiplexed derivatization reagents and its correlative molecularly imprinted polymers for magnetic extraction of globotriaosylsphingosine.

Combined protein A imprinting and cryogelation for production of spherical affinity material.

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle-containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein-imprinted cryogel beads. The protein-imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A-imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.

Advances in Molecularly Imprinting Technology for Bioanalytical Applications.

In recent years, along with the rapid development of relevant biological fields, there has been a tremendous motivation to combine molecular imprinting technology (MIT) with biosensing. In this situation, bioprobes and biosensors based on molecularly imprinted polymers (MIPs) have emerged as a reliable candidate for a comprehensive range of applications, from biomolecule detection to drug tracking. Unlike their precursors such as classic immunosensors based on antibody binding and natural receptor elements, MIPs create complementary cavities with stronger binding affinity, while their intrinsic artificial polymers facilitate their use in harsh environments. The major objective of this work is to review recent MIP bioprobes and biosensors, especially those used for biomolecules and drugs. In this review, MIP bioprobes and biosensors are categorized by sensing method, including optical sensing, electrochemical sensing, gravimetric sensing and magnetic sensing, respectively. The working mechanism(s) of each sensing method are thoroughly discussed. Moreover, this work aims to present the cutting-edge structures and modifiers offering higher properties and performances, and clearly point out recent efforts dedicated to introduce multi-sensing and multi-functional MIP bioprobes and biosensors applicable to interdisciplinary fields.

[Molecular imprinting technology and its application in terpenoids].

Molecular imprinting technology is widely used in the separation and analysis of compounds such as flavonoids, alkaloids and polyphenols, due to its high selectivity and specific recognition and so on. However, no much of attention has been paid to the terpenoids. This paper is aimed to not only review the effects of common synthetic elements such as functional monomers, cross-linking agents and porogens on the polymer properties, but also highlight the application of terpene molecular imprinting in solid phase extraction, sensor, membrane separation and chromatographic separation by means of statistical analysis of literature. Furthermore, the shortcomings and improvement directions are discussed.We believed that this paper could provide references for better applications of molecular imprinting techniques to the analysis of terpenoid compounds.

Gas Sensors Based on Molecular Imprinting Technology.

Molecular imprinting technology (MIT); often described as a method of designing a material to remember a target molecular structure (template); is a technique for the creation of molecularly imprinted polymers (MIPs) with custom-made binding sites complementary to the target molecules in shape; size and functional groups. MIT has been successfully applied to analyze; separate and detect macromolecular organic compounds. Furthermore; it has been increasingly applied in assays of biological macromolecules. Owing to its unique features of structure specificity; predictability; recognition and universal application; there has been exploration of the possible application of MIPs in the field of highly selective gas sensors. In this present study; we outline the recent advances in gas sensors based on MIT; classify and introduce the existing molecularly imprinted gas sensors; summarize their advantages and disadvantages; and analyze further research directions.

Synthesis and characterization of a molecularly imprinted polymer for the isolation of the 16 US-EPA priority polycyclic aromatic hydrocarbons (PAHs) in solution.

A smart sorbent consisting of benzo[k]fluoranthene-imprinted and indeno[1 2 3-cd]pyrene-imprinted polymers mixed at 1:1 (w/w) was successfully screened from several cavity-tuning experiments and used in the isolation of polycyclic aromatic hydrocarbons from spiked solution. The polymer mixture showed high cross selectivity and affinity towards all the 16 US-EPA priority polycyclic aromatic hydrocarbons. The average extraction efficiency from a cyclohexane solution was 65 ± 13.3% (n = 16, SD). Batch adsorption and kinetic studies confirmed that the binding of polycyclic aromatic hydrocarbons onto the polymer particles resulted in formation of a monolayer and that the binding process was the rate limiting step. The imprinted polymer performance studies confirmed that the synthesized polymer had an imprinting efficiency of 103.9 ± 3.91% (n = 3, SD). A comparison of the theoretical number of cavities and the experimental binding capacity showed that the overall extent of occupation of the imprinted cavities in the presence of excess polycyclic aromatic hydrocarbons was 128 ± 6.45% (n = 3, SD). The loss of selectivity was estimated at 2.9% with every elution cycle indicating that the polymer can be re-used several times with limited loss of selectivity and sensitivity. The polymer combination has shown to be an effective adsorbent that can be used to isolate all the 16 US-EPA priority polycyclic aromatic hydrocarbons in solution.

Selective removal of oxytetracycline by molecularly imprinted magnetic biochar.

Molecularly imprinted magnetic biochar (MBC@MIPs) was synthesized through molecular imprinting precipitation polymerization. This material demonstrated a selective adsorption capacity of oxytetracycline (OTC) from water samples. Upon characterization of MBC@MIPs, results revealed the formation of a memory cavity shell layer on the magnetic biochar's surface, exhibiting a distinctive recognition effect alongside commendable magnetic and thermal stability. Analysis of the adsorption kinetics indicated that the OTC adsorption process aligned well with the pseudo-second-order rate equation, with chemisorption acting as the predominant mechanism for antibiotic adsorption onto MBC@MIPs. The data could be well described by the Langmuir isotherm model. At 299 K, MBC@MIPs showed a maximum binding capacity of 67.89 mg·g-1, surpassing that of MBC (38.84 mg·g-1) by 1.77 times. MBC@MIPs exhibited the highest selectivity towards OTC, with an imprinting factor (IF) of 5.64. Even amidst interference from antibiotics, MBC@MIPs maintained a significant adsorption capacity for OTC (6.10 mg·g-1), with IF of 6.70.

Functionalized nano cellulose double-template imprinted aerogel microsphere for the targeted enrichment of taxanes.

Paclitaxel, a diterpenoid isolated from the bark of Taxus wallichiana var. chinensis (Pilger) Florin, is currently showing significant therapeutic effects against a variety of cancers. Baccatin III (Bac) and 10-Deacetylbaccatin III (10-DAB) are in great demand as important precursors for the synthesis of paclitaxel. This work aims to develop a simple, rapid and highly selective, safe, and non-polluting molecularly imprinted material for 10-DAB and Bac enrichment. In this study, we innovatively prepared molecularly imprinted materials with nanocellulose aerogel microspheres and 2-vinylpyridine (2-VP) as a bifunctional monomer, and 10-DAB and Bac as bis-template molecules. In particular, functionalized nanocellulose dual-template molecularly imprinted aerogel microsphere (FNCAG-DMIM) were successfully synthesized by the bifunctional introduction of functional nanocellulose aerogel microsphere (FNCAG) modified with Polyethyleneimine (PEI) as a carrier and functional monomer, which provided a large number of recognition sites for bimodal molecules. FNCAG-DMIM showed high specificity for 10-DAB and Bac specific assays. Under the optimal experimental conditions, the adsorption capacities of FNCAG-DMIM for 10-DAB and Bac reached 52.27 mg g-1 and 53.81 mg g-1, respectively. In addition, it showed good reliability and practicality in the determination of real samples. The present study extends the research on the synthesis of natural functional monomers by molecularly imprinted materials and opens up new horizons for the targeted isolation of plant compounds by dual-template molecularly imprinted materials.

A SERS-assisted 3D organotypic microfluidic chip for in-situ visualization and monitoring breast cancer extravasation process.

Extravasation, as one of the key steps in cancer metastasis, refers to the process where tumor cells escape the bloodstream by crossing the vascular endothelium and invade the targeted tissue, which accounts for the low five-year survival rate of cancer patients. Understanding the mechanism of cancer metastasis and inhibiting extravasation are crucial to improve patient prognosis. Here, a 3D organotypic microfluidic chip combined with SERS-based protein imprinted nanomaterials (SPINs) was proposed to study the extravasation process in vitro. The chip consists of a collagen gel channel and a vascular channel where human vein endothelial cells (HUVECs) and breast cancer cells are injected sequentially to induce extravasation. By comparing two subtypes of breast cancer cells (MCF-7 and MDA-MB-231), we successfully observed the difference in extravasation capabilities between two kinds of cells through fluorescence imaging. Meanwhile, thanks to the high specificity of molecular imprinting technology and the high sensitivity of surface enhanced Raman scattering (SERS), SPINs were utilized to analyze the concentration of several cancer secretions (interleukin-6 and interleukin-8) in complex biological fluid in real-time. Further, our model showed that downregulation of secretions by therapeutic drugs can inhibit the extravasation of breast cancers. This microfluidic model may pave the way for the fundamental research of the cancer metastasis and evaluating the therapeutic efficacy of potential drugs.

[Recent advances of molecular imprinting technology for the separation and recognition of complex biological sample systems].

Given continuous improvements in industrial production and living standards, the analysis and detection of complex biological sample systems has become increasingly important. Common complex biological samples include blood, serum, saliva, and urine. At present, the main methods used to separate and recognize target analytes in complex biological systems are electrophoresis, spectroscopy, and chromatography. However, because biological samples consist of complex components, they suffer from the matrix effect, which seriously affects the accuracy, sensitivity, and reliability of the selected separation analysis technique. In addition to the matrix effect, the detection of trace components is challenging because the content of the analyte in the sample is usually very low. Moreover, reasonable strategies for sample enrichment and signal amplification for easy analysis are lacking. In response to the various issues described above, researchers have focused their attention on immuno-affinity technology with the aim of achieving efficient sample separation based on the specific recognition effect between antigens and antibodies. Following a long period of development, this technology is now widely used in fields such as disease diagnosis, bioimaging, food testing, and recombinant protein purification. Common immuno-affinity technologies include solid-phase extraction (SPE) magnetic beads, affinity chromatography columns, and enzyme linked immunosorbent assay (ELISA) kits. Immuno-affinity techniques can successfully reduce or eliminate the matrix effect; however, their applications are limited by a number of disadvantages, such as high costs, tedious fabrication procedures, harsh operating conditions, and ligand leakage. Thus, developing an effective and reliable method that can address the matrix effect remains a challenging endeavor. Similar to the interactions between antigens and antibodies as well as enzymes and substrates, biomimetic molecularly imprinted polymers (MIPs) exhibit high specificity and affinity. Furthermore, compared with many other biomacromolecules such as antigens and aptamers, MIPs demonstrate higher stability, lower cost, and easier fabrication strategies, all of which are advantageous to their application. Therefore, molecular imprinting technology (MIT) is frequently used in SPE, chromatographic separation, and many other fields. With the development of MIT, researchers have engineered different types of imprinting strategies that can specifically extract the target analyte in complex biological samples while simultaneously avoiding the matrix effect. Some traditional separation technologies based on MIP technology have also been studied in depth; the most common of these technologies include stationary phases used for chromatography and adsorbents for SPE. Analytical methods that combine MIT with highly sensitive detection technologies have received wide interest in fields such as disease diagnosis and bioimaging. In this review, we highlight the new MIP strategies developed in recent years, and describe the applications of MIT-based separation analysis methods in fields including chromatographic separation, SPE, diagnosis, bioimaging, and proteomics. The drawbacks of these techniques as well as their future development prospects are also discussed.

Research progress of sensors based on molecularly imprinted polymers in analytical and biomedical analysis.

Molecularly imprinted polymers (MIPs) have had tremendous impact on biomimetic recognition due to their precise specificity and high affinity comparable to that of antibodies, which has shown the great advantages of easy preparation, good stability and low cost. The combination of MIPs with other analytical technologies can not only achieve rapid extraction and sensitive detection of target compounds, improving the level of analysis, but also achieve precise targeted delivery, in-vivo imaging and other applications. Among them, the recognition mechanism plays a vital role in chemical and biological sensing, while the improvement of the recognition element, such as the addition of new nanomaterials, can greatly improve the analytical performance of the sensor, especially in terms of selectivity. Currently, due to the need for rapid diagnosis and improved sensing properties (such as selectivity, stability, and cost-effectiveness), researchers are investigating new recognition elements and their combinations to improve the recognition capabilities of chemical sensing and bio-sensing. Therefore, this review mainly discusses the design strategies of optical sensors, electrochemical sensors and photoelectric sensors with molecular imprinting technology and their applications in environmental systems, food fields, drug detection and biology including bacteria and viruses.