Precisely constructing orbital coupling-modulated iron dinuclear site for enhanced catalytic ozonation performance.

The advancement of atomically precise dinuclear heterogeneous catalysts holds great potential in achieving efficient catalytic ozonation performance and contributes to the understanding of synergy mechanisms during reaction conditions. Herein, we demonstrate a "ship-in-a-bottle and pyrolysis" strategy that utilizes Fe2(CO)9 dinuclear-cluster to precisely construct Fe2 site, consisting of two Fe1-N3 units connected by Fe-Fe bonds and firmly bonded to N-doped carbon. Systematic characterizations and theoretical modeling reveal that the Fe-Fe coordination motif markedly reduced the devotion of the antibonding state in the Fe-O bond because of the strong orbital coupling interaction of dual Fe d-d orbitals. This facilitates O-O covalent bond cleavage of O3 and enhances binding strength with reaction intermediates (atomic oxygen species; *O and *OO), thus boosting catalytic ozonation performance. As a result, Fe dinuclear site catalyst exhibits 100% ozonation efficiency for CH3SH elimination, outperforming commercial MnO2 catalysts by 1,200-fold. This research provides insights into the atomic-level structure-activity relationship of ozonation catalysts and extends the use of dinuclear catalysts in catalytic ozonation and beyond.

In situ ligand-modulated activation of inert Ce(III/IV) into ozonation catalyst for efficient water treatment.

As a classic strategy to maximize catalytic activity, modulation of the electronic structure of central metal using organic ligands encounters great challenge in radical reactions exemplified by advanced oxidation processes (AOPs) due to operando destruction of employed ligands. Herein, we provide a paradigm achieving in situ ligand-modulated activation of the originally inert Ce(III/IV) for catalytic ozonation as a representative AOP widely applied in full-scale water treatment. Among the small-molecule carboxylates typically produced from pollutant degradation during ozonation, we find oxalate (OA) is a potent ligand to activate Ce(III/IV), inducing 11.5- and 5.8-fold elevation in rate constants of O3 decomposition and atrazine degradation, respectively. The Ce(III)-OA complex is proved the catalytic active species to boost pollutant degradation, while the catalytic ozonation unusually involves both •OH-dependent and •OH-independent pathways with comparable contributions. Both experiment and density functional theory calculation results show the pronounced electron donating effect of OA as evidenced by the substantial decreases in the charge residing on Ce, the ionization potential, and the Ce(III/IV) electrode potential, affords the activation of the Ce center for efficient ozonation. A comprehensive kinetic model involving 67 reactions is established to verify and elaborate the catalytic mechanism. Moreover, with in situ OA production, trace Ce3+ enables autocatalytic mineralization and codegradation of typical contaminants, which are not observed in case of Fe2+ or Cu2+. In addition, Ce3+ outperforms numerous state-of-the-art ozonation catalysts in terms of mass activity. This study sheds light on sustainable activation of the metal center harnessing operando ligands produced from the catalyzed reaction.

3D Carbon Microspheres with a Maze-Like Structure and Large Mesopore Tunnels Built From Rapid Aerosol-Confined Coherent Salt/Surfactant Templating.

Hierarchically porous carbons with tailor-made properties are essential for applications wherein rich active sites and fast mass transfer are required. Herein, a rapid aerosol-confined salt/surfactant templating approach is proposed for synthesizing hierarchically porous carbon microspheres (HPCMs) with a maze-like structure and large mesopore tunnels for high-performance tri-phase catalytic ozonation. The confined assembly in drying microdroplets is crucial for coherent salt (NaCl) and surfactant (F127) dual templating without macroscopic phase separation. The HPCMs possess tunable sizes, a maze-like structure with highly open macropores (0.3-30 µm) templated from NaCl crystal arrays, large intrawall mesopore tunnels (10-45 nm) templated from F127, and rich micropores (surface area >1000 m2 g-1 ) and oxygen heteroatoms originated from NaCl-confined carbonization of phenolic resin. The structure formation mechanism of the HPCMs and several influencing factors on properties are elaborated. The HPCMs exhibit superior performance in gas-liquid-solid tri-phase catalytic ozonation for oxalate degradation, owing to their hierarchical pore structure for fast mass transfer and rich defects and oxygen-containing groups (especially carbonyl) for efficient O3 activation. The reactive oxygen species responsible for oxalate degradation and the influences of several structure parameters on performance are discussed. This work may provide a platform for producing hierarchically porous materials for various applications.

Optimization of Carbon-Defect Engineering to Boost Catalytic Ozonation Efficiency of Single Fe─N4 Coordination Motif.

Carbon-defect engineering in single-atom metal-nitrogen-carbon (M─N─C) catalysts by straightforward and robust strategy, enhancing their catalytic activity for volatile organic compounds, and uncovering the carbon vacancy-catalytic activity relationship are meaningful but challenging. In this study, an iron-nitrogen-carbon (Fe─N─C) catalyst is intentionally designed through a carbon-thermal-diffusion strategy, exposing extensively the carbon-defective Fe─N4 sites within a micro-mesoporous carbon matrix. The optimization of Fe─N4 sites results in exceptional catalytic ozonation efficiency, surpassing that of intact Fe─N4 sites and commercial MnO2 by 10 and 312 times, respectively. Theoretical calculations and experimental data demonstrated that carbon-defect engineering induces selective cleavage of C─N bond neighboring the Fe─N4 motif. This induces an increase in non-uniform charges and Fermi density, leading to elevated energy levels at the center of Fe d-band. Compared to the intact atomic configuration, carbon-defective Fe─N4 site is more activated to strengthen the interaction with O3 and weaken the O─O bond, thereby reducing the barriers for highly active surface atomic oxygen (*O/*OO), ultimately achieving efficient oxidation of CH3SH and its intermediates. This research not only offers a viable approach to enhance the catalytic ozonation activity of M─N─C but also advances the fundamental comprehension of how periphery carbon environment influences the characteristics and efficacy of M─N4 sites.

Immobilizing Bimetallic RuCo Nanoalloys on Few-Layered MXene as a Robust Bifunctional Electrocatalyst for Overall Water Splitting.

Doping Co atoms into Ru lattices can tune the electronic structure of active sites, and the conductive MXene can adjust the electrical conductivity of catalysts, which are both favorable for improving the electrocatalytic activity of the catalyst for water splitting. Here, ruthenium-cobalt bimetallic nanoalloys coupled with exfoliated Ti3 C2 Tx MXene (RuCo-Ti3 C2 Tx ) have been constructed by ice-templated and thermal activation. Due to the strong interaction between the RuCo nanoalloys and conductive MXene, RuCo-Ti3 C2 Tx not only exhibits an excellent hydrogen evolution reaction (HER) performance with a low overpotential and Tafel slope (60 mV, 34.8 mV dec-1 in 0.5 M H2 SO4 and 52 mV, 38.7 mV dec-1 in 1 M KOH), but also good oxygen evolution reaction (OER) performance in an alkaline electrolyte (266 mV, 111.1 mV dec-1 in 1 M KOH). The assembled RuCo-Ti3 C2 Tx ||RuCo-Ti3 C2 Tx electrolyzer requires a lower potential (1.56 V) than does the Pt/C||RuO2 electrolyzer at 10 mA cm-2 . A boosted catalytic HER activity from immobilizing the RuCo nanoalloys on MXene was unveiled by density functional theory calculations. This study provides a feasible and efficient strategy for developing MXene-based catalysts for overall water splitting.

Enhanced Photocatalytic Ozonation Using Modified TiO2 With Designed Nucleophilic and Electrophilic Sites.

Photocatalytic ozonation is considered to be a promising approach for the treatment of refractory organic pollutants, but the design of efficient catalyst remains a challenge. Surface modification provides a potential strategy to improve the activity of photocatalytic ozonation. In this work, density functional theory (DFT) calculations were first performed to check the interaction between O3 and TiO2-OH (surface hydroxylated TiO2) or TiO2-F (surface fluorinated TiO2), and the results suggest that TiO2-OH displays better O3 adsorption and activation than does TiO2-F, which is confirmed by experimental results. The surface hydroxyl groups greatly promote the O3 activation, which is beneficial for the generation of reactive oxygen species (ROS). Importantly, TiO2-OH displays better performance towards pollutants (such as berberine hydrochloride) removal than does TiO2-F and most reported ozonation photocatalysts. The total organic carbon (TOC) removal efficiency reaches 84.4 % within two hours. This work highlights the effect of surface hydroxylation on photocatalytic ozonation and provides ideas for the design of efficient photocatalytic ozonation catalysts.

Nanoscale Sequential Reactor Design Achieves Effective Removal of Disinfection Byproduct Precursors in Catalytic Ozonation.

Transforming dissolved organic matter (DOM) is a crucial approach to alleviating the formation of disinfection byproducts (DBPs) in water treatment. Although catalytic ozonation effectively transforms DOM, increases in DBP formation potential are often observed due to the accumulation of aldehydes, ketones, and nitro compound intermediates during DOM transformation. In this study, we propose a novel strategy for the sequential oxidation of DOM, effectively reducing the levels of accumulation of these intermediates. This is achieved through the development of a catalyst with a tailored surface and nanoconfined active sites for catalytic ozonation. The catalyst features a unique confinement structure, wherein Mn-N4 moieties are uniformly anchored on the catalyst surface and within nanopores (5-20 Å). This design enables the degradation of the large molecular weight fraction of DOM on the catalyst surface, while the transformed smaller molecular weight fraction enters the nanopores and undergoes rapid degradation due to the confinement effect. The generation of *Oad as the dominant reactive species is essential for effectively reducing these ozone refractory intermediates. This resulted in over 70% removal of carbonaceous and nitrogenous DBP precursors as well as brominated DBP precursors. This study highlights the importance of the nanoscale sequential reactor design and provides new insights into eliminating DBP precursors by the catalytic ozonation process.

Catalytic Ozonation of Low Concentration Toluene over MnFeOx-USY Catalyst: Effects of Interactions between Catalytic Components and Introduction of Gas Phase NOx.

A series of Mn and Fe metal oxide catalysts loaded onto USY, as well as single metal oxides, were prepared and characterized. The effects of interactions between the catalytic components and the introduction of gas phase NO on the catalytic ozonation of toluene were investigated. Characterization showed that there existed strong interactions between MnOx, FeOx, and USY, which enhanced the content of oxygen vacancies and acid sites of the catalysts and thus boosted the generation of reactive oxygen species and the adsorption of toluene. The MnFeOx-USY catalyst with MnOx and FeOx dimetallic oxides exhibited the most excellent performance of catalytic ozonation of toluene. On the other hand, the presence of NOx in reaction gas mixtures significantly promoted both toluene conversion and mineralization, which was attributed to the formation of nitrate species on the catalysts surface and thus the increase of both acid sites and toluene oxidation sites. Meanwhile, the reaction mechanism between O3 and C7H8 was modified in which the strong interactions between MnOx, FeOx, and USY accelerated the reaction progress based on the L-H route. In addition, the formation of the surface nitrate species not only promoted reaction progress following the L-H route but also resulted in the occurrence of the reaction via the E-R route.

Transforming Plain LaMnO3 Perovskite into a Powerful Ozonation Catalyst: Elucidating the Mechanisms of Simultaneous A and B Sites Modulation for Enhanced Toluene Degradation.

Herein, we propose preferential dissolution paired with Cu-doping as an effective method for synergistically modulating the A- and B-sites of LaMnO3 perovskite. Through Cu-doping into the B-sites of LaMnO3, specifically modifying the B-sites, the double perovskite La2CuMnO6 was created. Subsequently, partial La from the A-sites of La2CuMnO6 was etched using HNO3, forming novel La2CuMnO6/MnO2 (LCMO/MnO2) catalysts. The optimized catalyst, featuring an ideal Mn:Cu ratio of 4.5:1 (LCMO/MnO2-4.5), exhibited exceptional catalytic ozonation performance. It achieved approximately 90% toluene degradation with 56% selectivity toward CO2, even under ambient temperature (35 °C) and a relatively humid environment (45%). Modulation of A-sites induced the elongation of Mn-O bonds and decrease in the coordination number of Mn-O (from 6 to 4.3) in LCMO/MnO2-4.5, resulting in the creation of abundant multivalent Mn and oxygen vacancies. Doping Cu into B-sites led to the preferential chemisorption of toluene on multivalent Cu (Cu(I)/Cu(II)), consistent with theoretical predictions. Effective electronic supplementary interactions enabled the cycling of multiple oxidation states of Mn for ozone decomposition, facilitating the production of reactive oxygen species and the regeneration of oxygen vacancies. This study establishes high-performance perovskites for the synergistic regulation of O3 and toluene, contributing to cleaner and safer industrial activities.

Reactivity of Cyanobacteria Metabolites with Ozone: Multicompound Competition Kinetics.

Cyanobacterial blooms occur at increasing frequency and intensity, notably in freshwater. This leads to the introduction of complex mixtures of their products, i.e., cyano-metabolites, to drinking water treatment plants. To assess the fate of cyano-metabolite mixtures during ozonation, a novel multicompound ozone (O3) competition kinetics method was developed. Sixteen competitors with known second-order rate constants for their reaction with O3 ranging between 1 and 108 M-1 s-1 were applied to cover a wide range of the O3 reactivity. The apparent second-order rate constants (kapp,O3) at pH 7 were simultaneously determined for 31 cyano-metabolites. kapp,O3 for olefin- and phenol-containing cyano-metabolites were consistent with their expected reactivity (0.4-1.7 × 106 M-1 s-1) while kapp,O3 for tryptophan- and thioether-containing cyano-metabolites were significantly higher than expected (3.4-7.3 × 107 M-1 s-1). Cyano-metabolites containing these moieties are predicted to be well abated during ozonation. For cyano-metabolites containing heterocycles, kapp,O3 varied from <102 to 5.0 × 103 M-1 s-1, giving first insights into the O3 reactivity of this class of compounds. Due to lower O3 reactivities, heterocycle- and aliphatic amine-containing cyano-metabolites may be only partially degraded by a direct O3 reaction near circumneutral pH. Hydroxyl radicals, which are formed during ozonation, may be more important for their abatement. This novel multicompound kinetic method allows a high-throughput screening of ozonation kinetics.

Phototransformation of Brominated Disinfection Byproducts and Toxicity Elimination in Sunlit-Ozonated Reclaimed Water.

Ozonation is universally used during water treatment but can form hazardous brominated disinfection byproducts (Br-DBPs). While sunlight exposure is advised to reduce the risk of Br-DBPs, their phototransformation pathways remain insufficiently understood. Here, sunlight irradiation was found to reduce adsorbable organic bromine by 63%. Applying high-resolution mass spectrometry, the study investigated transformations of dissolved organic matter in sunlit-ozonated reclaimed water, revealing the number and abundance of assigned formulas decreased after irradiation. The Br-DBPs with O/C < 0.6 and MW > 400 Da were decreased or removed after irradiation, with the majority being CHOBr compounds. The peak intensity reduction ratio of CHOBr compounds correlated positively with double bound equivalent minus oxygen ratios but negatively with O/C, suggesting that photo-susceptible CHOBr compounds were highly unsaturated. Mass difference analysis revealed that the photodegradation pathways were mainly oxidation aligned with debromination. Three typical CHOBr molecular structures were resolved, and their photoproducts were proposed. Toxicity estimates indicated decreased toxicity in these photoproducts compared to their parent compounds, in line with experimentally determined values. Our proposed phototransformation pathways for Br-DBPs enhance our comprehension of their degradation and irradiation-induced toxicity reduction in reclaimed water, further illuminating their transformation under sunlight in widespread environmental scenarios.

Enhancement Effect Induced by the Second Metal to Promote Ozone Catalytic Oxidation of VOCs.

It is a promising research direction to develop catalysts with high stability and ozone utilization for low-temperature ozone catalytic oxidation of VOCs. While bimetallic catalysts exhibit excellent catalytic activity compared with conventional single noble metal catalysts, limited success has been achieved in the influence of the bimetallic effect on the stability and ozone utilization of metal catalysts. Herein, it is necessary to systematically study the enhancement effect in the ozone catalytic reaction induced by the second metal. With a simple continuous impregnation method, a platinum-cerium bimetallic catalyst is prepared. Also highlighted are studies from several aspects of the contribution of the second metal (Ce) to the stability and ozone utilization of the catalysts, including the "electronic effect" and "geometric effect". The synergistic removal rate of toluene and ozone is nearly 100% at 30 °C, and it still shows positive stability after high humidity and a long reaction time. More importantly, the instructive significance, which is the in-depth knowledge of enhanced catalytic mechanism of bimetallic catalysts resulting from a second metal, is provided by this work.

A Detailed Reaction Mechanism for Thiosulfate Oxidation by Ozone in Aqueous Environments.

The ozone oxidation, or ozonation, of thiosulfate is an important reaction for wastewater processing, where it is used for remediation of mining effluents, and for studying aerosol chemistry, where its fast reaction rate makes it an excellent model reaction. Although thiosulfate ozonation has been studied since the 1950s, challenges remain in developing a realistic reaction mechanism that can satisfactorily account for all observed products with a sequence of elementary reaction steps. Here, we present novel measurements using trapped microdroplets to study the pH-dependent thiosulfate ozonation kinetics. We detect known products and intermediates, including SO32-, SO42-, S3O62-, and S4O62-, establishing agreement with the literature. However, we identify S2O42- as a new reaction intermediate and find that the currently accepted mechanism does not directly explain observed pH effects. Thus, we develop a new mechanism, which incorporates S2O42- as an intermediate and uses elementary steps to explain the pH dependence of thiosulfate ozonation. The proposed mechanism is tested using a kinetic model benchmarked to the experiments presented here, then compared to literature data. We demonstrate good agreement between the proposed thiosulfate ozonation mechanism and experiments, suggesting that the insights in this paper can be leveraged in wastewater treatment and in understanding potential climate impacts.

Synergetic Manipulation Mechanism of Single-Atom M-N4 and M-OH (M = Mn, Fe, Co, Ni) Sites for Ozone Activation: Theoretical Prediction and Experimental Verification.

Carbon-based single-atom catalysts (SACs) have been gradually introduced in heterogeneous catalytic ozonation (HCO), but the interface mechanism of O3 activation on the catalyst surface is still ambiguous, especially the effect of a surface hydroxyl group (M-OH) at metal sites. Herein, we combined theoretical calculations with experimental verifications to comprehensively investigate the O3 activation mechanisms on a series of conventional SAC structures with N-doped nanocarbon substrates (MN4-NCs, where M = Mn, Fe, Co, Ni). The synergetic manipulation effect of the metal atom and M-OH on O3 activation pathways was paid particular attention. O3 tends to directly interact with the metal atom on MnN4-NC, FeN4-NC, and NiN4-NC catalysts, among which MnN4-NC has the best catalytic activity for its relatively lower activation energy barrier of O3 (0.62 eV) and more active surface-adsorbed oxygen species (Oads). On the CoN4-NC catalyst, direct interaction of O3 with the metal site is energetically infeasible, but O3 can be activated to generate Oads or HO2 species from direct or indirect participation of M-OH sites. The experimental results showed that 90.7 and 82.3% of total organic carbon (TOC) was removed within 40 min during catalytic ozonation of p-hydroxybenzoic acid with MnN4-NC and CoN4-NC catalysts, respectively. Phosphate quenching, catalyst characterization, and EPR measurement further supported the theoretical prediction. This contribution provides fundamental insights into the O3 activation mechanism on SACs, and the methods and ideals could be helpful for future studies of environmental catalysis.

Tailored Metal-Organic Frameworks for Water Purification: Perfluorinated Fe-MOFs for Enhanced Heterogeneous Catalytic Ozonation.

An industrially viable catalyst for heterogeneous catalytic ozonation (HCO) in water purification requires the characteristics of good dispersion of active species on its surface, efficient electron transfer for ozone decay, and maximum active species utilization. While metal-organic frameworks (MOFs) represent an attractive platform for HCO, the metal nodes in the unmodified MOFs exhibit low catalytic activity. Herein, we present a perfluorinated Fe-MOF catalyst by substituting H atoms on the metalated ligands with F atoms (termed 4F-MIL-88B) to induce structure evolution. The Lewis acidity of 4F-MIL-88B was enhanced via the formation of Fe nodes, tailoring the electron distribution on the catalyst surface. As a result of catalyst modification, the rate constant for degradation of the target compounds examined increased by ∼700% compared with that observed for the unmodified catalyst. Experimental evidence and theoretical calculations showed that the modulated polarity and the enhanced electron transfer between the catalyst and ozone molecules contributed to the adsorption and transformation of O3 to •OH on the catalyst surface. Overall, the results of this study highlight the significance of tailoring the metalated ligands to develop highly efficient and stable MOF catalysts for HCO and provide an in-depth mechanistic understanding of their structure-function evolution, which is expected to facilitate the applications of nanomaterial-based processes in water purification.

2D-Like Catalyst with a Micro-nanolinked Functional Surface for Water Purification.

In water purification, the performance of heterogeneous advanced oxidation processes significantly relies upon the utilization of the catalyst's specific surface area (SSA). However, the presence of the structural "dead volume" and pore-size-induced diffusion-reaction trade-off limitation restricts the functioning of the SSA. Here, we reported an effective approach to make the best SSA by changing the traditional 3D spherule catalyst into a 2D-like form and creating an in situ micro-nanolinked structure. Thus, a 2D-like catalyst was obtained which was characterized by a mini "paddy field" surface, and it exhibited a sharply decreased dead volume, a highly available SSA and oriented flexibility. Given its paddy-field-like mass-transfer routine, the organic capture capability was 7.5-fold higher than that of the catalyst with mesopores only. Moreover, such a catalyst exhibited a record-high O3-to-·OH transition rate of 2.86 × 10-8 compared with reported millimetric catalysts (metal base), which contributed to a 6.12-fold higher total organic removal per catalyst mass than traditional 3D catalysts. The facile scale preparation, performance stability, and significant material savings with the 2D-like catalyst were also beneficial for practical applications. Our findings provide a unique and general approach for designing potential catalysts with excellent performance in water purification.

Preparation of ceramsite using solid residue from anaerobic digestion of waste activated sludge and its enhancing effect on catalytic ozonation.

Anaerobic digestion is an environmentally friendly method for reclaiming waste activated sludge. However, it cannot be overlooked that the solid residue generated from this process can still pose environmental risks and impose economic pressure on society. To mitigate and recycle the solid residue, this study utilized it as a primary raw material for manufacturing ceramsite with potential applications in wastewater treatment. The optimal ratio of solid residue to fly ash was demonstrated to be 6:4 with an additional 15% of clay supplementing the raw ceramsite materials. Furthermore, the optimal sintering process was established as preheating at 300 °C for 25 min followed by sintering at 1085 °C for 10 min, as determined through an L16 (44) Orthogonal test. The prepared ceramsite demonstrated advantageous performance parameters that exceeded the standards outlined in the Chinese industry standard CJ/T 299-2008 for water treatment artificial ceramsite. When utilized in an ozonation system, the ceramsite exhibited remarkable catalytic activity for phenol degradation by promoting the decomposition of molecular O3 into hydroxyl radicals. Additionally, it displayed minimal leaching of heavy metals and lower application costs. These findings emphasize its attractiveness in water and wastewater treatment processes and present a practical strategy for reclaiming this solid residue.

Using green nanocomposite containing eggshell in the electroperoxone process in a baffled reactor to remove the emerging tetracycline pollutant.

This study examined the eradication of Tetracycline hydrochloride (TCH) antibiotic, an emerging pollutant, by utilizing eggshell membrane activated carbon (EMAC) and magnetite (Fe3O4) nanocomposite in conjunction with the electroperoxone process employing the One Factor at a Time method (OFAT) in a baffled reactor. The nanocomposite was synthesized through the hydrothermal method using an autoclave, and its properties were assessed via XRD, FTIR, FESEM, EDAX Mapping, BET, and VSM analyses. The findings revealed that under optimal conditions (including a pollutant concentration of 300 mg/L, a natural pH of 6.2, an ozone consumption rate of 0.28 g/h, a nanocomposite concentration of 0.2 g/L, a flow intensity of 0.5 A, a wastewater recirculation flow rate of 8 L/h, and a 0.1 M Na2SO4 electrolyte concentration), 95.9%, 76.4%, and 53.4% of pollutants, COD, and TOC were respectively eliminated after 90 min. Additionally, the reusability of the nanocomposite was evaluated over five usage periods, during which the process efficiency decreased from 95.9% to 83.1%. In short, this study proved that EMAC/Fe3O4 nanocomposites are promising electroperoxone catalysts due to their low cost, excellent stability and reusability, environmental compatibility, and superior catalytic activity for TCH antibiotics removal.

Novel cow dung-doped sludge biochar as an efficient ozone catalyst: Synergy between graphitic structure and defects induces free radical pathways.

A composite material, cow dung-doped sludge biochar (Zn@SBC-CD), was synthesized by one-step pyrolysis using ZnCl2 as an activating agent and applied to a catalytic ozonation process (COP) for methylene blue (MB) removal. SEM, XRD, FTIR, XPS and BET analyses were performed to characterize the biochar (BC) catalysts. Zn@SBC-CD had high graphitization degree, abundant active sites and uniform distribution of Zn on its surface. Complete removal of MB was achieved within 10 min, with a removal rate much higher than that of ozone alone (32.4%), implying the excellent ozone activation performance of Zn@SBC-CD. The influence of experimental parameters on MB removal efficiency was examined. Under the optimum conditions in terms of ozone dose 0.04 mg/mL, catalyst dose 400 mg/L and pH 6.0, COD was completely removed after 20 min. Electron paramagnetic resonance (EPR) analysis revealed radical and non-radical pathways were involved in MB degradation. The Zn@SBC-CD/O3 system generated superoxide anion radicals (•O2-), which were the main active species for MB removal, through adsorption, transformation, and transfer, Furthermore, Zn@SBC-CD exhibited good reusability and stability in cycling experiments. This study provides a novel approach for the utilization of cow dung and sludge in synthesis of functional biocatalysts and application in organic wastewater treatment.

Synthesis of surficial-modified green biochar catalyst generated by biogas residue biochar and potential application for catalytic ozonation degradation of ciprofloxacin.

This study synthesized novel, green, and easily recoverable surface-modified economical catalysts via hydrothermal treatment (HT) successfully, utilizing biogas residue biochar (BRB), a food waste product from anaerobic fermentation, pyrolyzed at 500 °C for 50 min. Using autoclaves, a total of six solutions were prepared, each having 1 g fine-grinded BRB, surficial modified by adding glycerol (GL) (10 or 20 mL) and SDI water (70 or 60 mL), and heated in an oven at 240 °C, 180 °C, and 120 °C for 24 h. Afterward, the catalysts showed the potential for degradation of widely used emerging pollutants like ciprofloxacin. Taking advantage of catalytic surface modification, the catalytic ozonation degradation was more effective than that of a single ozonation. However, under similar conditions, catalyst amount 0.20 g, ozone dose 15 mg L-1, and ciprofloxacin 80 mg L-1, the performance of the 10 mL GL-180 °C catalyst was excellent. It showed a 92.45%-94.41% optimum removal rate in the 8-10 min interval. After five continuous cycles, the 10 mL GL-180 °C catalyst exhibited excellent stability and reusability. XPS, FT-IR, BET, XRD, and SEM before and after the reaction confirmed the successful synthesis and degradation mechanism. A possible degradation pathway was unrevealed based on a liquid chromatography-mass spectrometer (LC-MS) and scavenger test, proving the significant roles of superoxide radicals (O2•-), hydroxyl radicals (•OH), and singlet oxygen (1O2). Further, Electron paramagnetic resonance (EPR) analysis confirmed the presence of active oxygen species. Subsequently, 10 mL GL-180 °C showed promising degradation for the actual water environment, such as groundwater (73.55%) and river water (64.74%). This work provides a valuable economic strategy to convert biogas residue biochar into a low-cost catalyst for organic pollutant decomposition.