Effectiveness and safety of robot-assisted versus fluoroscopy-assisted pedicle screw implantation in scoliosis surgery: a systematic review and meta-analysis.

This study aimed to assess the effectiveness and safety of robot-assisted versus fluoroscopy-assisted pedicle screw implantation in scoliosis surgery. The study was registered in the PROSPERO (CRD42023471837). Two independent researchers searched PubMed, Web of Science, Cochrane Library, and China National Knowledge Infrastructure. The outcomes included operation time, pedicle screw implantation time, blood loss, number of fluoroscopic, accuracy of pedicle screw position, hospital stays, postoperative hospital stays, Visual Analog Scale (VAS), Japanese Orthopaedic Association (JOA) score, Scoliosis Research Society-22(SRS-22), cobb angle, cobb angle correction rate, sagittal vertical axis (SVA), and complications. Eight papers involving 473 patients met all the criteria. There was no significant difference between the two groups regarding the reduction in operation time. The effect of reducing the pedicle screw implantation time in the RA group was significant (WMD = -1.28; 95% CI: -1.76 to -0.80; P < 0.00001). The effect of reducing the blood loss in the RA group was significant (WMD=-105.57; 95% CI: -206.84 to -4.31; P = 0.04). The effect of reducing the number of fluoroscopic in the RA group was significant (WMD=-5.93; 95% CI: -8.24 to -3.62; P < ). The pedicle screw position of Grade A was significantly more in the RA group according to both the Gertzbein-Robbins scale and the Rampersaud scale. Compared with the FA group, the difference in the hospital stays in the RA group was not statistically significant, but the effect of reducing the postoperative hospital stays in the RA group was significant (WMD = -2.88; 95% CI: -4.13 to -1.63; P < 0.00001). The difference in the VAS, JOA, SRS-22, Cobb angle and Cobb angle correction rate, SVA, and complications between the two groups was not statistically significant. The robot-assisted technique achieved statistically significant results in terms of pedicle screw placement time, blood loss, number of fluoroscopies, accuracy of pedicle screw position, and postoperative hospital stay.

Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation.

PURPOSE: Preoperative computed tomography (CT)-based navigation is used for cervical pedicle screw (CPS) insertion to mitigate the risk of spinal cord and vertebral artery injury. In vertebrae with osteosclerosis due to degeneration or other factors, however, probing may not proceed easily, with difficulty creating the CPS insertion hole. This study investigated the impact of osteosclerosis on the accuracy of CPS insertion. METHODS: A total of 138 patients with CPS inserted at the C3-C7 level using preoperative CT navigation were retrospectively analyzed. Pre- and postoperative CT was employed to investigate screw position and Hounsfield unit (HU) values at the lateral mass to evaluate the degree of osteosclerosis in the CPS insertion pathway. RESULTS: Among 561 CPS insertions, the Grade 3 perforation rate was 1.8%, and the Grade 2 or higher perforation rate was 8.0%. When comparing insertions with and without CPS perforation, HU values were significantly higher in the perforation group (578 ± 191 vs. 318 ± 191, p < 0.01). The frequency of CPS insertion into the mid-cervical spine was also significantly greater in the perforation group (68.9% vs. 62.5%, p < 0.01). Logistic regression analysis revealed that a high HU value at the lateral mass (odds ratio 1.09, 95% confidence interval: 1.07-1.11, p < 0.01) was a significant independent factor associated with CPS deviation. CONCLUSIONS: The screw perforation rate of Grade 2 or higher in CPS insertion using preoperative CT-based navigation was 8.0%. Since osteosclerosis was an independent factor related to CPS deviation, additional care may be required during insertion into affected vertebrae.

Accuracy of augmented reality-assisted pedicle screw placement: a systematic review.

OBJECTIVE: Conventional freehand methods of pedicle screw placement are associated with significant complications due to close proximity to neural and vascular structures. Recent advances in augmented reality surgical navigation (ARSN) have led to its adoption into spine surgery. However, little is known regarding its overall accuracy. The purpose of this study is to delineate the overall accuracy of ARSN pedicle screw placement across various models. METHODS: A systematic review was conducted of Medline/PubMed, Cochrane and Embase Library databases according to the PRISMA guidelines. Relevant data extracted included reports of pedicle screw placement accuracy and breaches, as defined by the Gertzbein-Robbins classification, in addition to deviation from pre-planned trajectory and entry point. Accuracy was defined as the summation of grade 0 and grade 1 events per the Gertzbein-Robbins classification. RESULTS: Twenty studies reported clinically accurate placed screws. The range of clinically accurate placed screws was 26.3-100%, with 2095 screws (93.1%) being deemed clinically accurate. Furthermore, 5.4% (112/2088) of screws were reported as grade two breaches, 1.6% (33/2088) grade 3 breaches, 3.1% (29/926) medial breaches and 2.3% (21/926) lateral breaches. Mean linear deviation ranged from 1.3 to 5.99 mm, while mean angular/trajectory deviation ranged 1.6°-5.88°. CONCLUSION: The results of this study highlight the overall accuracy of ARSN pedicle screw placement. However, further robust prospective studies are needed to accurately compare to conventional methods of pedicle screw placement.

Comparison of the clinical and radiographic outcomes of cortical bone trajectory and traditional trajectory pedicle screw fixation in transforaminal lumbar interbody fusion: a randomized controlled trial.

PURPOSE: To compare the clinical outcomes and radiographic outcomes of cortical bone trajectory (CBT) and traditional trajectory (TT) pedicle screw fixation in patients treated with single-level transforaminal lumbar interbody fusion (TLIF). METHODS: This trial included a total of 224 patients with lumbar spine disease who required single-level TLIF surgery. Patients were randomly assigned to the CBT and TT groups at a 1:1 ratio. Demographics and clinical and radiographic data were collected to evaluate the efficacy and safety of CBT and TT screw fixation in TLIF. RESULTS: The baseline characteristic data were similar between the CBT and TT groups. Back and leg pain for both the CBT and TT groups improved significantly from baseline to 24 months postoperatively. The CBT group experienced less pain than the TT group at one week postoperatively. The postoperative radiographic results showed that the accuracy of screw placement was significantly increased in the CBT group compared with the TT group (P < 0.05). The CBT group had a significantly lower rate of FJV than the TT group (P < 0.05). In addition, the rate of fusion and the rate of screw loosening were similar between the CBT and TT groups according to screw loosening criteria. CONCLUSION: This prospective, randomized controlled analysis suggests that clinical outcomes and radiographic characteristics, including fusion rates and caudal screw loosening rates, were comparable between CBT and TT screw fixation. Compared with the TT group, the CBT group showed advantages in the accuracy of screw placement and the FJV rate. CLINICAL TRIALS REGISTRATION: This trial has been registered at the US National Institutes of Health Clinical Trials Registry: NCT03105167.

Deep-learning reconstructed lumbar spine 3D MRI for surgical planning: pedicle screw placement and geometric measurements compared to CT.

PURPOSE: To test equivalency of deep-learning 3D lumbar spine MRI with "CT-like" contrast to CT for virtual pedicle screw planning and geometric measurements in robotic-navigated spinal surgery. METHODS: Between December 2021 and June 2022, 16 patients referred for spinal fusion and decompression surgery with pre-operative CT and 3D MRI were retrospectively assessed. Pedicle screws were virtually placed on lumbar (L1-L5) and sacral (S1) vertebrae by three spine surgeons, and metrics (lateral deviation, axial/sagittal angles) were collected. Vertebral body length/width (VL/VW) and pedicle height/width (PH/PW) were measured at L1-L5 by three radiologists. Analysis included equivalency testing using the 95% confidence interval (CI), a margin of ± 1 mm (± 2.08° for angles), and intra-class correlation coefficients (ICCs). RESULTS: Across all vertebral levels, both combined and separately, equivalency between CT and MRI was proven for all pedicle screw metrics and geometric measurements, except for VL at L1 (mean difference: - 0.64 mm; [95%CI - 1.05, - 0.24]), L2 (- 0.65 mm; [95%CI - 1.11, - 0.20]), and L4 (- 0.78 mm; [95%CI - 1.11, - 0.46]). Inter- and intra-rater ICC for screw metrics across all vertebral levels combined ranged from 0.68 to 0.91 and 0.89-0.98 for CT, and from 0.62 to 0.92 and 0.81-0.97 for MRI, respectively. Inter- and intra-rater ICC for geometric measurements ranged from 0.60 to 0.95 and 0.84-0.97 for CT, and 0.61-0.95 and 0.93-0.98 for MRI, respectively. CONCLUSION: Deep-learning 3D MRI facilitates equivalent virtual pedicle screw placements and geometric assessments for most lumbar vertebrae, with the exception of vertebral body length at L1, L2, and L4, compared to CT for pre-operative planning in patients considered for robotic-navigated spine surgery.

Usefulness of the spectral shaping dual-source computed tomography imaging technique in posterior corrective fusion for adolescent idiopathic scoliosis.

PURPOSE: Since childhood exposure to radiation has been demonstrated to increase cancer risk with increase in radiation dose, reduced radiation exposure during computed tomography (CT) evaluation is desired for adolescent idiopathic scoliosis (AIS). Therefore, this retrospective study aimed to investigate the radiation dose of dual-source CT using a spectral shaping technique and the accuracy of the thoracic pedicle screw (TPS) placement for posterior spinal fusion (PSF) in patients with AIS. METHODS: Fifty-nine female patients with thoracic AIS who underwent PSF using CT-guided TPSs were included and divided into two groups comprised of 23 patients who underwent dual-source CT (DSCT) with a tin filter (DSCT group) and 36 who underwent conventional multislice CT (MSCT group). We assessed the CT radiation dose using the CT dose index (CTDIvol), effective dose (ED), and accuracy of TPS insertion according to the established Neo's classification. RESULTS: The DSCT and MSCT groups differed significantly (p < 0.001) in the mean CTDIvol (0.76 vs. 3.31 mGy, respectively) and ED (0.77 vs. 3.47 mSv, respectively). Although the correction rate of the main thoracic curve in the DSCT group was lower (65.7% vs. 71.2%) (p = 0.0126), the TPS accuracy (Grades 0-1) was similar in both groups (381 screws [88.8%] vs. 600 screws [88.4%], respectively) (p = 0.8133). No patient required replacement of malpositioned screws. CONCLUSION: Spectral shaping DSCT with a tube-based tin filter allowed a 75% radiation dose reduction while achieving TPS insertion accuracy similar to procedures based on conventional CT without spectral shaping.

Impact of intraoperative imaging on decision-making during spine surgery: a survey among spine surgeons using simulated intraoperative images.

PURPOSE: To assess whether the intention to intraoperatively reposition pedicle screws differs when spine surgeons evaluate the same screws with 2D imaging or 3D imaging. METHODS: In this online survey study, 21 spine surgeons evaluated eight pedicle screws from patients who had undergone posterior spinal fixation. In a simulated intraoperative setting, surgeons had to decide if they would reposition a marked pedicle screw based on its position in the provided radiologic imaging. The eight assessed pedicle screws varied in radiologic position, including two screws positioned within the pedicle, two breaching the pedicle cortex < 2 mm, two breaching the pedicle cortex 2-4 mm, and two positioned completely outside the pedicle. Surgeons assessed each pedicle screw twice without knowing and in random order: once with a scrollable three-dimensional (3D) image and once with two oblique fluoroscopic two-dimensional (2D) images. RESULTS: Almost all surgeons (19/21) intended to reposition more pedicle screws based on 3D imaging than on 2D imaging, with a mean number of pedicle screws to be repositioned of, respectively, 4.1 (± 1.3) and 2.0 (± 1.3; p < 0.001). Surgeons intended to reposition two screws placed completely outside the pedicle, one breaching 2-4mm, and one breaching < 2 mm more often based on 3D imaging. CONCLUSION: When provided with 3D imaging, spine surgeons not only intend to intraoperatively reposition pedicle screws at risk of causing postoperative complications more often but also screws with acceptable positions. This study highlights the potential of intraoperative 3D imaging as well as the need for consensus on how to act on intraoperative 3D information.

Analysis of duration of different stages of surgery in posterior spinal fusion (PSF) for adolescent idiopathic scoliosis (AIS) patients: comparison between severe versus non-severe AIS.

PURPOSE: Prolonged surgical duration in severe adolescent idiopathic scoliosis (AIS) patients is associated with increased blood loss and perioperative complications. The aim of this study was to compare the duration of each stage of posterior spinal fusion (PSF) in severe AIS (Cobb angle ≥ 90°) with non-severe AIS patients. This analysis will identify the most time-consuming stage of PSF and help surgeons formulate strategies to shorten operative time. METHODS: Retrospective study whereby 90 AIS patients (Lenke type 2, 3, 4, and 6) who underwent PSF from 2019 to 2023 were recruited. Twenty-five severe AIS patients were categorized in Gp1 and 65 non-severe AIS patients in Gp2. Propensity score matching (PSM) with one-to-one with nearest neighbor matching (match tolerance 0.05) was performed. Outcomes measured via operation duration of each stage of surgery, blood loss, number of screws, fusion levels and screw density. RESULTS: Twenty-five patients from each group were matched. Total operative time was significantly higher in Gp1 (168.2 ± 30.8 vs. 133.3 ± 24.0 min, p < 0.001). The lengthiest stage was screw insertion which took 58.5 ± 13.4 min in Gp1 and 44.7 ± 13.7 min in Gp2 (p = 0.001). Screw insertion contributed 39.5% of the overall increased surgical duration in Gp1. Intraoperative blood loss (1022.2 ± 412.5 vs. 714.2 ± 206.7 mL, p = 0.002), number of screws (17.1 ± 1.5 vs. 15.5 ± 1.1, p < 0.001) and fusion level (13.1 ± 0.9 vs. 12.5 ± 1.0, p = 0.026) were significantly higher in Gp1. CONCLUSION: Screw insertion was the most time-consuming stage of PSF and was significantly longer in severe AIS. Adjunct technologies such as CT-guided navigation and robotic-assisted navigation should be considered to reduce screw insertion time in severe AIS.

Thoracolumbar fractures patients undergoing posterior pedicle screw fixation can benefit from drainage.

PURPOSE: To explore whether it is necessary to put drain tubes after posterior pedicle screw fixation of thoracolumbar fractures. METHODS: From April 2020 to January 2023, a total of 291 patients with recent thoracolumbar fractures (AO type-A or type-B) who received the pedicle screw fixation operation were enrolled retrospectively. In 77 patients, drain tubes were used in the pedicle screw fixation surgery, while no drain tubes were placed in the other group. After gleaning demographic information and results of lab examination and imageology examination, all data were put into a database. Independent-sample t-tests, Pearson Chi-Square tests, Linear regression analysis, and correlation analysis were then performed. RESULTS: Compared to the control group, the drainage group had significantly lower postoperative CRP levels (P = 0.047), less use of antipyretics (P = 0.035), higher ADL scores (P = 0.001), and lower NRS scores (P < 0.001) on the 6th day after surgery. Other investigation items, such as demographic information, operation time, intraoperative blood loss, body temperature, and other preoperative and postoperative lab results, showed no significant differences. CONCLUSIONS: The use of a drain tube in the pedicle screw fixation of thoracolumbar fractures is correlated with the improvement of patients' living and activity ability and the reduction of inflammation, postoperative fever and pain.

Analysis of factors influencing the intravertebral shell phenomenon after posterior reduction internal fixation of thoracolumbar fracture: a retrospective study.

STUDY DESIGN: A retrospective study. PURPOSE: The study objectives were as follows: 1) to analyze the factors influencing the occurrence of the intravertebral shell phenomenon (ISP) after thoracolumbar spinal fracture surgery and the evolutionary outcome of this phenomenon; and 2) to make recommendations for the clinical prevention and treatment of ISP. METHODS: We retrospectively analyzed 331 patients with single-segment fractures of the thoracolumbar spine treated with internal fixation via a pedicle screw-rod system. Univariate and multivariate logistic regression were used to analyze factors influencing ISP. RESULTS: A total of 260 patients (78.5%) developed ISP after surgery. Reduced bone mineral density, screw insertion depth, degree of vertebral body injury, and excessive vertebral body spreading were significantly associated with the occurrence of ISP (P < 0.05). A total of 166 of the 260 patients were reviewed via CT at 1 year postoperatively. Among them, 104 patients (62.6%) showed shrinkage or healed vertebral cavities, and 62 patients (37.4%) showed enlarged vertebral cavities or collapsed endplates. CONCLUSION: In clinical management, surgeons need to focus on risk factors for ISP, which include decreased bone density, preoperative vertebral overcompression, intraoperative vertebral overextension, screw insertion depth, and the degree of vertebral repositioning. At the 1-year postoperative follow-up, some of the vertebrae with ISP failed to heal or even showed vertebral cleft enlargement, which would affect the stability of the internal fracture fixation device and the quality of the patient's daily life.

Factors associated with non-fusion after direct pars repair of lumbar spondylolysis with pedicle screw and lamina hook: a clinical and CT-assessed study.

BACKGROUND: Pedicle screw and lamina hook (PSLH) technique is an effective and popular method for direct pars repair of lumbar spondylolysis. There is a lack of studies to explore factors that may influence the healing of spondylolysis after direct pars repair surgery. The present study aimed to investigate the factors associated with non-fusion after direct pars repair of lumbar spondylolysis with PSLH technique. METHODS: A total of 55 subjects (average age 21.1 ± 6.3 years, a total of 120 pars defects) diagnosed with symptomatic spondylolysis and underwent pars repair surgery with PSLH were followed up and their clinical data were analyzed. Subjects were divided into a non-fusion group and fusion group according to whether the pars defect had bony fusion at last follow-up assessed by CT. Radiographic data, data related to spondylolysis and clinical outcomes were collected and compared between groups. RESULTS: The mean follow-up time of the 55 patients was 24.8 ± 12.0 (12-64) months. Among the 120 pars defects, 101 defects were successfully fused and 19 were not fused according to CT. The fusion rate was 84.2%. Multivariable logistic regression analysis showed the factors correlated with non-fusion after pars repair surgery: whether the spondylolysis segment was associated with spina bifida occulta (SBO) (P = 0.001), stage of the defect (P = 0.047), width of the defect (P = 0.002), and disc degeneration (P = 0.014). CONCLUSION: Direct pars repair by PSHL is a reliable treatment for lumbar spondylolysis with a fusion rate of 84.2%. Association with SBO of the spondylolysis segment, a terminal stage of the defect, a wider defect gap, and grade III disc degeneration may be factors associated with non-fusion after direct pars repair of lumbar spondylolysis with PLSH. Non-fusion patients after pars repair appear to have worse clinical results compared to fusion patients.

Preoperative and follow-up variations of psoas major muscle are related to S1 screw loosening in patients with degenerative lumbar spinal stenosis.

BACKGROUND: It was reported the paraspinal muscle played an important role in spinal stability. The preoperative paraspinal muscle was related to S1 screw loosening. But the relationship between preoperative and postoperative change of psoas major muscle (PS) and S1 pedicle screw loosening in degenerative lumbar spinal stenosis (DLSS) patients has not been reported. This study investigated the effects of preoperative and follow-up variations in the psoas major muscle (PS) on the first sacral vertebra (S1) screw loosening in patients with DLSS. METHODS: 212 patients with DLSS who underwent lumbar surgery were included. The patients were divided into the S1 screw loosening group and the S1 screw non-loosening group. Muscle parameters were measured preoperatively and at last follow-up magnetic resonance imaging. A logistic regression analysis was performed to investigate the risk factors for S1 screw loosening. RESULTS: The S1 screw loosening rate was 36.32% (77/212). The relative total cross-sectional areas and relative functional cross-sectional areas (rfCSAs) of the PS at L2-S1 were significantly higher after surgery. The increased rfCSA values of the PS at L3-S1 in the S1 screw non-loosening group were significantly higher than those in the S1 screw loosening group. The regression analysis showed male, lower CT value of L1 and longer segment fusion were independent risk factors for S1 screw loosening, and postoperative hypertrophy of the PS was a protective factor for S1 screw loosening. CONCLUSIONS: Compared to the preoperative muscle, the PS size increased and fatty infiltration decreased after surgery from L2-3 to L5-S1 in patients with DLSS after short-segment lumbar fusion surgery. Postoperative hypertrophy of the PS might be considered as a protective factor for S1 screw loosening. MRI morphometric parameters and postoperative selected exercise of PS for DLSS patients after posterior lumbar fusion surgery might contribute to improvement of surgical outcome.

Biportal endoscopic-assisted cortical bone trajectory screw placement and lumbar interbody fusion.

BACKGROUND: Endoscopically assisted screw fixation with lumbar interbody fusion is rarely performed. We succeeded in implanting the cortical bone trajectory (CBT) screws under the guidance of unilateral biportal endoscopy (UBE). METHOD: We attempted endoscopically assisted screw fixation in a patient with degenerative spondylolisthesis. Through a third portal, ipsilateral CBT screws were implanted without complications. CONCLUSIONS: We successfully performed unilateral biportal endoscopic lumbar interbody fusion (ULIF) with CBT and reversed CBT screws. Compared with percutaneous pedicle screw (PPS) placement, this procedure is a minimally invasive, endoscopic alternative that allows precise screw placement.

Free-hand technique of C7 pedicle screw insertion using a simply defined entry point without fluoroscopic guidance for cervical spondylotic myelopathy patients with C3 to C6 instrumented by lateral mass screws: a retrospective cohort study.

BACKGROUND: Nowadays, both lateral mass screw (LMS) and pedicle screw were effective instrumentation for posterior stabilization of cervical spine. This study aims to evaluate the feasibility of a new free-hand technique of C7 pedicle screw insertion without fluoroscopic guidance for cervical spondylotic myelopathy (CSM) patients with C3 to C6 instrumented by lateral mass screws. METHODS: A total of 53 CSM patients underwent lateral mass screws instrumentation at C3 to C6 levels and pedicle screw instrumentation at C7 level were included. The preoperative 3-dimenional computed tomography (CT) reconstruction images of cervical spine were used to determine 2 different C7 pedicle screw trajectories. Trajectory A passed through the axis of the C7 pedicle while trajectory B selected the midpoint of the base of C7 superior facet as the entry point. All these 53 patients had the C7 pedicle screw inserted through trajectory B by free-hand without fluoroscopic guidance and the postoperative CT images were obtained to evaluate the accuracy of C7 pedicle screw insertion. RESULTS: Trajectory B had smaller transverse angle, smaller screw length, and smaller screw width but both similar sagittal angle and similar pedicle height when compared with trajectory A. A total of 106 pedicle screws were inserted at C7 through trajectory B and only 8 screws were displaced with the accuracy of screw placement as high as 92.5%. CONCLUSION: In CSM patients with C3 to C6 instrumented by LMS, using trajectory B for C7 pedicle screw insertion is easy to both identify the entry point and facilitate the rod insertion.

The optimal introversion angle and length of pedicle screw to avoid L1-S1 vascular damage.

BACKGROUND: posterior pedicle screw fixation is common method, one of the most severe complications is iatrogenic vascular damage, no report investigated association of different introversion angles (INTAs) and length of pedicle screw. The aims were to investigate the optimal introversion angle and length of pedicle screw for improving the safety of the operation, and to analyze the differences of vascular damage types at L1-S1. METHODS: Lumbar CT imaging data from110 patients were analyzed by DICOM software, and all parameters were measured by new Cartesian coordinate system, INTAs (L1-L5:5°,10°,15°,S1: 0°, 5°,10°,15°), DO-AVC (the distance between the origin (O) with anterior vertebral cortex (AVC)), DAVC-PGVs (the distance between AVC and the prevertebral great vessels (PGVs)), DO-PGVs (the distance between the O and PGVs). At different INTAs, DAVC-PGVs were divided into four grades: Grade III: DAVC-PGVs ≤ 3 mm, Grade II: 3 mm < DAVC-PGVs ≤ 5 mm, Grade I: DAVC-PGVs > 5 mm, and N: the not touching PGVs. RESULTS: The optimal INTA was 5° at L1-L3, the left was 5° and the right was 15° at L4, and screw length was less than 50 mm at L1-L4. At L5, the left optimal INTA was 5° and the right was 10°, and screw length was less than 45 mm. The optimal INTA was 15° at S1, and screw length was less than 50 mm. However, screw length was less than 40 mm when the INTA was 0° or 5° at S1. CONCLUSIONS: At L5-S1, the risk of vascular injury is the highest. INTA and length of the pedicle screw in lumbar operation are closely related. 3 mm interval of screw length may be more preferable to reduce vascular damage.

Can We Rely on Prophylactic Two-Level Vertebral Cement Augmentation in Long-Segment Adult Spinal Deformity Surgery to Reduce the Incidence of Proximal Junctional Complications?

Background and Objectives: Proximal junctional kyphosis (PJK) and failure (PJF), the most prevalent complications following long-segment thoracolumbar fusions for adult spinal deformity (ASD), remain lacking in defined preventive measures. We studied whether one of the previously reported strategies with successful results-a prophylactic augmentation of the uppermost instrumented vertebra (UIV) and supra-adjacent vertebra to the UIV (UIV + 1) with polymethylmethacrylate (PMMA)-could also serve as a preventive measure of PJK/PJF in minimally invasive surgery (MIS). Materials and Methods: The study included 29 ASD patients who underwent a combination of minimally invasive lateral lumbar interbody fusion (MIS-LLIF) at L1-2 through L4-5, all-pedicle-screw instrumentation from the lower thoracic spine to the sacrum, S2-alar-iliac fixation, and two-level balloon-assisted PMMA vertebroplasty at the UIV and UIV + 1. Results: With a minimum 3-year follow-up, non-PJK/PJF group accounted for fifteen patients (52%), PJK for eight patients (28%), and PJF requiring surgical revision for six patients (21%). We had a total of seven patients with proximal junctional fracture, even though no patients showed implant/bone interface failure with screw pullout, probably through the effect of PMMA. In contrast to the PJK cohort, six PJF patients all had varying degrees of neurologic deficits from modified Frankel grade C to D3, which recovered to grades D3 and to grade D2 in three patients each, after a revision operation of proximal extension of instrumented fusion with or without neural decompression. None of the possible demographic and radiologic risk factors showed statistical differences between the non-PJK/PJF, PJK, and PJF groups. Conclusions: Compared with the traditional open surgical approach used in the previous studies with a positive result for the prophylactic two-level cement augmentation, the MIS procedures with substantial benefits to patients in terms of less access-related morbidity and less blood loss also provide a greater segmental stability, which, however, may have a negative effect on the development of PJK/PJF.

[Oblique Lumbar Interbody Fusion Combined With 4-Screw Fixation for Treating Two-Level Degenerative Lumbar Diseases:A Finite Element Study].

Objective To demonstrate the feasibility of oblique lumbar interbody fusion (OLIF) combined with 4-screw fixation for treating two-level lumbar degenerative diseases.Methods An intact finite element model of L3-S1 (M0) was constructed and validated.Then,we constructed the M1 model by simulating OLIF surgery at L3/4 and L4/5 segments on the M0 model.By attachment of posterior 4-screw or 6-screw fixation to the M1 model,three 4-screw fixation models (M2-M4) and one 6-screw fixation model (M5) were established.The segmental and overall range of motion (ROM) and the peak von Mises stresses of superior endplate,cage,and posterior screw-rod were investigated under each implanted condition.Results Under the motion modes of forward flexion,backward extension,bilateral (left and right) flexion,and left and right rotation,the L3/4 ROM of M2 model and L4/5 ROM of M3 model increased,while the L3/4 and L4/5 ROM of M4 and M5 models significantly decreased compared with those of M1 model.Under all motion modes,the L4 superior endplate in M2 model and the L5 superior endplate in M3 model showed the maximum peak von Mises stress,and the peak von Mises stresses of L4 and L5 superior endplates in M4 and M5 models were close.The L3/4 cage in M2 model and the L4/5 cage in M3 model showcased the largest peak von Mises stress,and the peak von Mises stresses of cages in M4 and M5 models were close.The peak stresses of internal fixation in M2-M5 models were close.Conclusion Four-screw fixation can replace 6-screw fixation in the OLIF surgery for treating two-level degenerative lumbar diseases.

[Comparison of Clinical Effects of Cortical Bone Trajectory Screws and Traditional Pedicle Screws in Posterior Lumbar Fusion]. / è °æ¤ŽåŽè·¯èžåˆæœ¯ä¸­çš®è´¨éª¨è½¨è¿¹èžºé’‰å’Œä¼ ç»Ÿæ¤Žå¼“æ ¹èžºé’‰çš„ä¸´åºŠæ•ˆæžœæ¯”è¾ƒ.

Objective: To compare the clinical effects of cortical bone trajectory screws and traditional pedicle screws in posterior lumbar fusion. Methods: A retrospective study was conducted to analyze lumbar degeneration patients who underwent surgical treatment at our hospital between January 2016 and January 2019. A total of 123 patients who met the inclusion criteria were enrolled. The subjects were divided into two groups according to their surgical procedures and the members of the two groups were matched by age, sex, and the number of fusion segments. There were 63 patients in the traditional pedicle screws (PS) group and 60 in the cortical bone trajectory screws (CBTS) group. The outcomes of the two groups were compared. The primary outcome measures were perioperative conditions, including operation duration, estimated intraoperative blood loss (EBL), and length-of-stay (LOS), visual analog scale (VAS) score, Oswestry Disability Index (ODI) score, and interbody fusion rate. The secondary outcome measures were the time to postoperative ambulation and the incidence of complications. VAS scores and ODI scores were assessed before operation, 1 week, 1 month, 3 months, and 12 months after operation, and at the final follow-up. The interbody fusion rate was assessed in 1 year and 2 years after the operation and at the final follow-up. Results: The CBTS group showed a reduction in operation duration ([142.8±13.1] min vs. [174.7±15.4] min, P<0.001), LOS ([9.5±1.5] d vs. [12.0±2.0] d, P<0.001), and EBL ([194.2±38.3] mL vs. [377.5±33.1] mL, P<0.001) in comparison with the PS group. The VAS score for back pain in the CBTS group was lower than that in the PS group at 1 week and 1 month after operation and the ODI score in the CBTS group was lower than that in the PS group at 1 month after operation, with the differences being statistically significant (P<0.05). At each postoperative time point, the VAS score for leg pain and the interbody fusion rate did not show significant difference between the two groups. The VAS score for back and leg pain and the ODI score at each time point after operation in both the CBTS group and the PS group were significantly lower than those before operation (P<0.05). No significant difference was found in the time to postoperative ambulation or the overall complication incidence between the two groups. Conclusion: The CBTS technique could significantly shorten the operation duration and LOS, reduce EBL, and achieve the same effect as the PS technique does in terms of intervertebral fusion rate, pain relief, functional improvement, and complication incidence in patients undergoing posterior lumbar fusion.

Comparison of cement-augmented pedicle screw and conventional pedicle screw for the treatment of lumbar degenerative patients with osteoporosis.

STUDY DESIGN: A retrospective cohort study. OBJECTIVE: To compare the safety and clinical efficacy between using cement-augmented pedicle screws (CAPS) and conventional pedicle screws (CPS) for the treatment of lumbar degenerative patients with osteoporosis. Management of lumbar degenerative patients with osteoporosis undergoing spine surgery is challenging. The clinical efficacy and potential complications of the mid-term performance of the CAPS technique in the treatment of lumbar degenerative patients with osteoporosis remain to be evaluated. PATIENTS AND METHODS: The data of 131 lumbar degenerative patients with osteoporosis who were treated with screw fixation from May 2016 to December 2019 were retrospectively analyzed in this study. The patients were divided into the following two groups according to the type of screw used: (I) the CAPS group (n = 85); and (II) the CPS group (n = 46). Relevant data were compared between two groups, including the demographics data, clinical results and complications. RESULTS: The difference in the VAS, ODI and JOA scores at three and 6 months after the operation between the two groups was statistically significant (P < 0.05). At 12 months after surgery and the final follow-up, a significant difference in the fusion rate was found between the two groups (P < 0.05). Four cemented screws loosening were observed in the CAPS group (loosening rate 4/384, 1.04%) and 15 screws loosening were observed in the CPS group (loosening rate 15/214, 7.01%). In the CAPS group, a total of 384 augmented screws were used, and cement leakage was observed in 25 screws (25/384, 6.51%), but no obvious clinical symptoms or serious complications were observed. Adjacent vertebral fractures occurred in six patients in the CAPS group and one in the CPS group. CONCLUSIONS: CAPS technique is an effective strategy for the treatment of lumbar degenerative patients with osteoporosis, with a higher fusion rate and lower screw loosening rate than CPS.

Pedicle Screw Placement Aided by C-Arm Fluoroscopy: A "Nevermore without" Technology to Pursue Optimal Spine Fixation.

The surgical technique and the intraoperative technology that support spinal pedicle screw placement have consistently evolved over the past decades to decrease the misplacement rate of pedicle screws. We retrospectively evaluated our case series by analyzing the period 2016-2020. Patients undergoing pedicle screw fixation for cervical, thoracic, or lumbar spine degenerative diseases have been included. Surgery was carried out with the aid of intraoperative 3D C-arm fluoroscopy to assess and optimize screw placement and/or correct possible mispositioning. Each patient underwent a postoperative CT scan. Our aim was to evaluate the safety and accuracy of pedicle screw placement and estimate the variation in mispositioning rates. We carried out 329 surgical procedures, as follows: 70 cervical, 78 thoracic spine, and 181 lumbar spine surgeries. An excellent overall pedicle screw positioning was obtained, with slight differences between the cervical (98.6%), thoracic (100%), and lumbar (98.9%) tracts. Accordingly, only three patients required a revision surgery owing to mispositioning (0.91%). In particular, intraoperative C-arm fluoroscopy significatively improved the accuracy of thoracic screw positioning, as shown by postoperative CT scans. Our experience proves the crucial role of intraoperative C-arm fluoroscopy in pursuing optimal technical results and improving patient outcomes at follow-up.