Administración de surfactante mediante técnica mínimamente invasiva en neonatos / Administration of Surfactants by Minimally Invasive Technique in Neonates

Introducción: La administración de surfactante pulmonar tradicionalmente se realiza mediante un tubo endotraqueal, pero desde hace años existen técnicas menos invasivas como la administración mediante másscara laríngea, aerosolización y cateterización traqueal. Objetivos: Demostrar la evolución de tres neonatos que recibieron surfactante pulmonar mediante una cateterización traqueal y describir la técnica empleada para su administración. Presentación de casos: Se atendieron tres recién nacidos de muy bajo peso al nacer, que ingresaron en la unidad de cuidados intensivos neonatales del Hospital General Docente Iván Portuondo, San Antonio de los Baños, con síndrome de dificultad respiratoria del prematuro. Todos se trataron con surfactante pulmonar exógeno, Surfacen®, el cual se administró mediante cateterización traqueal empleando un catéter umbilical. Se trata de una técnica mínimamente invasiva que se realizó sin dificultades y siempre en el primer intento. Los tres pacientes mostraron mejoría clínica, gasométrica y radiográfica con esta forma de administración y solo uno de ellos tuvo una complicación durante el proceder, que no constituyó una limitante para su realización. Este método permitió mantener una ventilación no invasiva, y fue innecesaria la intubación endotraqueal en los neonatos. Los profesionales encargados de la ejecución de esta técnica recibieron entrenamiento previo. Conclusiones: La administración mínimamente invasiva de surfactante pulmonar resultó un método eficaz con el que se consiguió la resolución total del cuadro de dificultad respiratoria en los neonatos. El procedimiento empleado permitió una administración rápida y segura del Surfacen®(AU)

Introduction: Pulmonary surfactant administration is traditionally performed by endotracheal tube, but for years there have been less invasive techniques such as administration by laryngeal mask, aerosolization and tracheal catheterization. Objectives: To demonstrate the evolution of three neonates who received pulmonary surfactant via tracheal catheterization and to describe the technique used for its administration. Case presentation: Three very low birth weight newborns were attended and admitted to the neonatal intensive care unit of Iván Portuondo General Teaching Hospital, at San Antonio de los Baños municipality, with preterm respiratory distress syndrome. All were treated with exogenous pulmonary surfactant, Surfacen®, which was administered by tracheal catheterization using an umbilical catheter. This is a minimally invasive technique that was performed without difficulty and always on the first attempt. The three patients showed clinical, gasometric and radiographic improvement with this form of administration and only one of them had a complication during the procedure, which did not constitute a limitation for its performance. This method allowed maintaining non-invasive ventilation, and endotracheal intubation was unnecessary in neonates. The professionals in charge of performing this technique received previous training. Conclusions: Minimally invasive administration of pulmonary surfactant was an effective method that achieved total resolution of respiratory distress in neonates. The procedure used allowed rapid and safe administration of Surfacen®(AU)

Anti-inflammatory effects and acute oral toxicity of Copaifera spp. essential oil-loaded nanoemulsion / Efectos antiinflamatorios y toxicidad oral aguda de nanoemulsión cargada de aceite esencial de Copaifera spp

Copaifera spp. essential oil (EOC) was extracted by hydrodistillation of Copaifera oleoresin (COR). The EOC was characterized by GC/MS and a novel EOC-loaded nanoemulsion was developed to enhance the EOC solubility and to evaluate its utility as antinflammatory. EOC contain 14 volatile compounds (including ß-caryophyllene: 51.52%) having a required HLB of 11. The Surfactant: EOC: Water ratio of 13:15:75 (%, w:w:w) produced the optimal formulation (particle size: 94.47 nm). The EOC-loaded nanoemulsion presented a pseudoplastic/thixotropic behavior with excellent shelf stability for 6 months. The anti-inflammatory effect of the nanoemulsion was more potent than that of the EOC, and statistically equal to diclofenac (50 mg/kg). The EOC-loaded nanoemulsion showed no oral acute toxicity (in mice) at 2000 mg/kg; hence, it is considered a nontoxic product. The development of the EOC-loaded nanoemulsion added value to both the COR and the EOC by providinga suitable formulation that could be used as an anti-inflammatory product.

El aceite esencial (EOC) fue extraído por hidrodestilación de oleoresina de Copaifera spp. El EOC fue caracterizado químicamente por GC/MS. Se formuló una nanoemulsión con EOC para mejorar la solubilidad del EOC y evaluar su utilidad como antiinflamatorio. El EOC contiene 14 compuestos volátiles (incluido el ß-cariofileno: 51,52%) con un HLB requerido de 11. La relación Tensioactivo: EOC: Agua de 13:15:75 (%, p:p:p) produjo la formulación óptima (tamaño de partícula: 94,47 nm).. La nanoemulsión cargada con EOC presentó un comportamiento pseudoplástico/tixotrópico con una excelente estabilidad en almacenamiento durante 6 meses. El efecto antiinflamatorio de la nanoemulsión fue más potente que el del EOC y estadísticamente igual al diclofenaco (50 mg/kg). La nanoemulsión cargada con COE no mostró toxicidad aguda oral (en ratones) a 2000 mg/kg; por lo tanto, se considera un producto no tóxico. El desarrollo de la nanoemulsión cargada con EOC agregó valor tanto al COR como al EOC al proporcionar una formulación adecuada que podría usarse como un producto antiinflamatorio.

Compatibility and efficiency of preservatives in emulsive cosmetics containing high surfactant content

Abstract The objective of this study was to determine the influence of nonionic surfactants on the effectiveness of preservatives used in emulsions containing high surfactant content. Mixtures of different concentrations were prepared between polyethoxylated (40) hydrogenated castor oil (PHCO) and polyoxyethylene sorbitan monooleate (PSO), with methylparaben, phenoxyethanol, methylparaben, ethylparaben, propylparaben, and isobutylparaben (PMEPBI) blend, phenoxyethanol and benzoic acid (BP) blend, and phenoxyethanol and caprylyl glycol (PC) blend. Subsequently, the compatibility of the formulation ingredients and the effectiveness of the preservatives were evaluated by the challenge test. It was found that PHCO and PSO inactivated the antimicrobial action of methylparaben and PMEPBI. Paraben-free preservatives BP and PC had less influence on surfactants than systems containing parabens. When incorporated into microemulsions and nanoemulsions containing 40% and 20% surfactants, methylparaben and BP 0.2% and 0.5% were only effective against Aspergillus niger. The PMEPBI 0.2% was effective as a preservative in nanoemulsified formulations against A. niger, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. The results demonstrate that the efficacy of the preservative system in formulations containing nonionic surfactant excipients depends on the type of excipient, the components of the formulation, the preservative systems composition, the excipient to preservative ratio, and the availability in the formulation.

Disfunción del transportador del surfactante pulmonar ABCA3: reporte de un caso peruano / Surfactant ABCA3 transporter dysfunction: a case report from Peru

Resumen Introducción: Los trastornos genéticos que afectan la homeostasis del surfactante pulmonar son una causa importante del síndrome de dificultad respiratoria en el recién nacido a término y de enfermedad pulmonar intersticial difusa en niños. El transportador ABCA3 (ATP binding cassette A3) interviene en la producción normal del surfactante que recubre el interior de las paredes alveolares y funciona como agente tensioactivo. Caso clínico: Recién nacido a término que presentó dificultad respiratoria a los 3 días de vida y requirió ventilación mecánica. Los estudios para determinar otras causas de enfermedad pulmonar fueron negativos. Se realizó una biopsia de pulmón para realizar estudios de microscopía óptica y microscopía electrónica. Esta última mostró pequeños cuerpos lamelares anómalos, además de condensaciones electrodensas periféricas, características de las mutaciones del transportador ABCA3. Se inició tratamiento con pulsos de metilprednisolona, hidroxicloroquina, azitromicina y corticoides inhalados a dosis altas, y la respuesta clínica y radiológica fue favorable durante el seguimiento. Conclusiones: La correlación de las características clínicas y de las imágenes (tomografía y microscopía electrónica) puede ser útil para el diagnóstico de la disfunción del surfactante pulmonar, especialmente en los países de bajos y medianos recursos que no disponen de estudios genéticos para determinar las diferentes mutaciones del transportador ABCA3. Este es uno de los primeros casos reportados en Perú con respuesta adecuada al tratamiento y evolución favorable durante el seguimiento.

Abstract Background: Genetic disorders affecting pulmonary surfactant homeostasis are a major cause of respiratory distress syndrome in full-term newborn and childhood interstitial lung disease. The ABCA3 transporter (ATP binding cassette A3) intervenes in the normal production of surfactant that covers the interior of alveolar walls and plays a fundamental role as a surfactant. Case report: Male term newborn who presented respiratory distress 3 days after birth and required mechanical ventilation. Studies to determine other causes of lung disease were negative. Lung biopsy was performed for the study with light microscopy and electron microscopy. Electron microscopy showed small abnormal lamellar bodies in addition to peripheral electrodense condensations characteristic of ABCA3 transporter mutation. Treatment was started with pulses of methylprednisolone, hydroxychloroquine, azithromycin, and high-dose inhaled corticosteroids, finding a favorable clinical and radiological response to follow-up. Conclusions: Correlation of clinical characteristics and images (tomography and electron microscopy) can be useful for the diagnosis of lung surfactant dysfunction, especially in low and medium-income countries where genetic studies to determine the different ABCA3 transporter mutations are not available. This is one of the first cases reported in Peru with an adequate response to treatment and favorable evolution to follow-up.

Production of green surfactants: market prospects

Science has greatly contributed to the advancement of technology and to the innovation of production processes and their applications. Cleaning products have become indispensable in today's world, as personal and environmental hygiene is important to all societies worldwide. Such products are used in the home, in most work environments and in the industrial sectors. Most of the detergents on the market are synthesised from petrochemical products. However, the interest in reducing the use of products harmful to human health and the environment has led to the search for detergents formulated with natural, biodegradable surfactant components of biological (plant or microbiological) origin or chemically synthesised from natural raw materials usually referred to as green surfactants. This review addresses the different types, properties, and uses of surfactants, with a focus on green surfactants, and describes the current scenario as well as the projections for the future market economy related to the production of the different types of green surfactants marketed in the world.

Biosurfactant and bioemulsifier as promising molecules produced by Mucor hiemalis isolated from Caatinga soil

BACKGROUND: The present study describes the production of biosurfactant (BS) and emulsifier (BE) by the filamentous fungus Mucor hiemalis UCP 0039, as well as the characterization and stability of the both biomolecules for environmental or industrial applications. RESULTS: Biosurfactants and bioemulsifiers are amphiphilic compounds and are produced as extracellular molecules. The results showed that bioproduct obtained by shaker condition reduced the water surface tension of 72 to 32 mN/m and reached an emulsification index of 96%, while the static cultivation resulted in a biomolecule with a surface tension of 40 mN/m and an emulsification index of 96%, suggesting the production of a biosurfactant and bioemulsifier, respectively. The compounds showed glycolipid nature but the biosurfactant presented cationic charge, while the bioemulsifier, anionic charge. Thus, the results confirmed that M. hiemalis produced two distinct biomolecules under different parameters and in the same culture medium. CONCLUSIONS: It is the first time that biosurfactant and emulsifier production has been described in the same medium and under different physical conditions by Mucor hiemalis. Both biomolecules showed thermal stability, as well as have significant effect on the viscosity of hydrophobic compounds, indicating the excellent potential for environmental safety or industrial applications to improve the efficiency of sustainable and economic technologies.

A green approach for the treatment of dye and surfactant contaminated industrial wastewater / Uma abordagem verde para o tratamento de águas residuais industriais contaminadas por tintas e surfactantes

Abstract Synthetic dyes, particularly reactive and acid dyes, are commonly used in the textile industry because of their advantages as excellent color fastness and brightness. Also, surfactants are used for an increment of coloring success in the textile industry. One of the major problems concerning textile wastewater is the treatment of the effluents containing both dyes and surfactants. Biological treatment systems are recommended as useful, economic and eco-friendly methods for treatment of industrial wastewater. The purpose of this study was to investigate the binary removal of a textile dye and a surfactant by growing Aspergillus versicolor culture in molasses medium. The effect of dye and surfactant concentration on the removal of dye and surfactant was determined. This study resulted that 100% of the surfactant and dye molecules removed together with the formation of a dye-surfactant complex by fungus. It is concluded that binary removal systems are very efficient for industrial wastewater treatment.

Resumo Os corantes sintéticos, particularmente corantes reativos e ácidos, são comumente usados ​​na indústria têxtil devido às suas vantagens como excelente solidez da cor e brilho. Além disso, os surfactantes são usados ​​para incrementar o sucesso da coloração na indústria têxtil. Um dos principais problemas relativos às águas residuais têxteis são o tratamento dos efluentes contendo corantes e surfactantes. Os sistemas de tratamento biológico são recomendados como métodos úteis, econômicos e ecológicos para o tratamento de efluentes industriais. O objetivo deste estudo foi investigar a remoção binária de um corante têxtil e um surfactante, cultivando a cultura Aspergillus versicolor em meio de melaço. O efeito das concentrações de corante e surfactante nas remoções de corante e surfactante foi determinado. Este estudo resultou na remoção de 100% das moléculas de surfactante e corante juntamente com a formação de um complexo corante-surfactante por fungos. Conclui-se que os sistemas de remoção binária são muito eficientes no tratamento de efluentes industriais.

Biosurfactant produced by Candida utilis UFPEDA1009 with potential application in cookie formulation

BACKGROUND: Biosurfactants are biomolecules that have the potential to be applied in food formulations due to their low toxicity and ability to improve sensory parameters. Considering the ability of yeasts to produce biosurfactants with food-friendly properties, the aim of the present study was to apply a biosurfactant produced by Candida utilis in the formulation of cookies. RESULTS: The biosurfactant was obtained with a yield of 24.22 ± 0.23 g/L. The characterization analysis revealed that the structure of a metabolized fatty acid with high oleic acid content (68.63 ± 0.61%), and the thermogravimetric analysis demonstrated good stability at temperatures lower than 200°C, potential for food applications. The biosurfactant also exhibited satisfactory antioxidant activity at concentrations evaluated, without cytotoxic potential for cell strains, L929 and RAW 264.7, according to the (3-(4,5-dimethylthiazol-2- yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The incorporation of the surfactant into the dough of a standard cookie formulation to replace animal fat was carried out, achieving a softer, spongier product without significantly altering the physical and physicochemical properties or energy value. CONCLUSION: The thermal stability and antioxidant activity of the biosurfactant produced by C. utilis were verified, besides the positive contribution in the texture analysis of the cookies. Therefore, this biomolecule presents itself as a potential ingredient in flour-based sweet food formulations.

Snappe ii: analysis of accuracy and determination of the cutoff point as a death predictor in a brazilian neonatal intensive care unit / Snappe ii: análise da acurácia e determinação do ponto de corte como preditor de óbito em uma unidade de terapia inensiva neonatal brasileira

ABSTRACT Objective: To analyze the accuracy of the Score for Neonatal Acute Physiology Perinatal Extension (SNAPPE II) as a death predictor, to determine the cutoff point for mortality, and to analyze the association of independent variables with death. Methods: Prospective, longitudinal, hospital-based study on newborns admitted to the Neonatal Intensive Care Unit (NICU) for the first time from November 1, 2016 to April 30, 2017. Newborns with less than 12 hours of length of stay at the NICU, out-of-hospital births, major congenital malformations, and inter-hospital transfer were excluded. Variables were grouped according to hierarchical framework, related to maternal characteristics (distal level), prenatal and childbirth care (intermediate level), and birth conditions (proximal level). Descriptive analyses of SNAPPE II score ranges, Receiver Operating Characteristics Curve (ROC curve) to define the cutoff point for mortality, and bivariate analysis by the Wald test and multiple logistic regression were conducted. Results: After selection, the sample consisted of 247 newborns. In this study, the SNAPPE II cutoff point for mortality was 27, with sensitivity of 84.1% and specificity of 82.4%. 61% of those with a score ≥27 died. Multiple logistic regression showed an association between death and proximal-level variables: sepsis (Odds Ratio [OR] 10.68; 95% confidence interval [95%CI] 2.82-40.48; p<0.001); SNAPPE II ≥27 (OR 5.85; 95%CI 1.90-18.05; p=0.002); birth weight 750-999 g (OR 4.15; 95%CI 1.06-16.14; p=0.040); and nonuse of surfactant (OR 0.159; 95%CI 0.04-0.53; p=0.003). Conclusions: Neonatal mortality was directly proportional to increase in SNAPPE II. Score≥27 increased the odds of dying by six times compared with neonates with lower scores. The proximal variables related to health conditions and neonatal care were associated with death.

RESUMO Objetivo: Analisar a acurácia do Score for Neonatal Acute Physiology Perinatal Extension (SNAPPE II) como preditor de óbito, determinar o ponto de corte para mortalidade e analisar a associação das variáveis independentes com óbito. Métodos: Estudo prospectivo, longitudinal, de base hospitalar com recém-nascidos admitidos pela primeira vez na Unidade de Terapia Intensiva Neonatal (UTIN) entre 1° de novembro de 2016 e 30 de abril de 2017. Foram excluídos recém-nascidos com permanência menor que 12 horas na UTIN, nascimento extra-hospitalar, malformações congênitas maiores e transferência inter-hospitalar. As variáveis foram agrupadas sob determinação hierarquizada, relacionadas a características maternas (nível distal), assistência ao pré-natal e parto (nível intermediário) e condições do nascimento (nível proximal). Foram conduzidas análises descritivas dos graus de pontuação do SNAPPE II, Receiver Operating Characteristics Curve (curva ROC) para definição do ponto de corte para mortalidade e análise bivariada pelo teste de Wald e regressão logística múltipla. Resultados: Após seleção, a amostra constituiu-se de 247 recém-nascidos. Neste estudo, o ponto de corte do SNAPPE II para mortalidade foi 27, com sensibilidade de 84,1% e especificidade de 82,4%. Evoluíram a óbito 61% daqueles com pontuação ≥27. A regressão logística múltipla mostrou associação entre óbito e variáveis de nível proximal: sepse (Odds Ratio [OR] 10,68; intervalo de confiança de 95% [IC95%] 2,82-40,48; p<0,001); pontuação ≥27 (OR 5,85; IC95% 1,90-18,05; p=0,002); peso ao nascer entre 750 e 999 g (OR 4,15; IC95% 1,06-16,14; p=0,040); e não uso de surfactante (OR 0,159; IC95% 0,04-0,53; p=0,003). Conclusões: A mortalidade neonatal foi diretamente proporcional ao aumento do SNAPPE II. Escore≥27 aumentou seis vezes a chance de óbito em relação aos neonatos com escore inferior. As variáveis proximais relacionadas às condições de saúde e da atenção neonatal associaram-se ao óbito.

Characterization of Decellularized Human Pericardium for Tissue Engineering and Regenerative Medicine Applications / Caracterização do Pericárdio Humano Descelularizado para Engenharia de Tecidos e Aplicações de Medicina Regenerativa

Abstract Background: Pericardium tissue allograft can be used for surgical repair in several procedures. One of the tissue engineering strategies is the process of decellularization. This process decreases immunogenic response, but it may modify the natural extracellular matrix composition and behavior. Objective: The aim of this study was to evaluate the effectiveness of cell removal, maintenance of extracellular matrix properties and mechanical integrity of decellularized human pericardium using a low concentration solution of sodium dodecyl sulfate. Methods: Decellularization was performed with sodium dodecyl sulfate and ethylenediaminetetraacetic acid. Histological analysis, DNA quantification, evaluation of glycosaminoglycans and collagen were performed. Biomechanical assay was performed using tensile test to compare the decellularization effects on tissue properties of tensile strength, elongation and elastic modulus. P < 0.05 was considered significant. Results: There was reduction in visible nuclei present in pericardium tissue after decellularization, but it retained collagen and elastin bundles similar to fresh pericardium. The DNA contents of the decellularized pericardium were significantly reduced to less than 511.23 ± 120.4 ng per mg of dry weight (p < 0.001). The biomechanical assay showed no significant difference for fresh or decellularized tissue. Conclusion: The decellularization process reduces cell content as well as extracellular matrix components without changing its biomechanical properties.

Resumo Fundameto: O enxerto de pericárdio pode ser usado em muitos procedimentos de correção cirúrgica. Uma das estratégias da engenharia tecidual é o processo de descelularização. No entanto, embora esse processo diminua a resposta imunogênica, a descelularização pode modificar tanto o comportamento como a composição da matriz extracelular natural. Objetivos: Avaliar a eficácia da descelularização usando baixa concentração de dodecil sulfato de sódio na remoção celular, na manutenção das propriedades da matriz extracelular e na integridade mecânica do pericárdio humano descelularizado. Métodos: A descelularização foi realizada com dodecil sulfato de sódio e ácido etilenodiamino tetra-acético. Foi realizada análise histológica, quantificação de DNA, e avaliação de glicosaminoglicanos e colágeno. O estudo biomecânico foi conduzido pelo teste de tração para comparar os efeitos da descelularização sobre as propriedades teciduais de resistência à tração, alongamento e módulo de elasticidade. Foi considerado um valor de p < 0,05 como estatisticamente significativo. Resultados: Observou-se uma redução na quantidade de núcleos presentes no pericárdio após a descelularização, apesar de manter quantidades similares de feixes de elastina e de colágeno. As concentrações de DNA do pericárdio descelularizado foram significativamente reduzidas para menos que 511,23 ± 120,4 ng por mg de peso seco (p < 0,001). O teste biomecânico não apontou diferenças entre os tecidos fresco e descelularizado. Conclusão: A descelularização reduziu a concentração de células bem como os componentes da matriz extracelular sem afetar suas propriedades biomecânicas.

Composição de ácidos graxos de biossurfactantes produzidos por fungos filamentosos / Composition of fatty acids of biosurfactant produced by filamental fungi

Biossurfactantes são compostos com características tensoativas, produzidos por diversas espécies de microrganismos. Nesse estudo, a composição de ácidos graxos de biossurfactantes produzidos por fungos filamentosos endofíticos foram analisados. Para a produção dos biossurfactantes, empregou-se fontes de carbono (óleo vegetal de milho) e nitrogênio (ureia) de baixo custo no meio de cultivo. A composição de ácidos graxos foi determinada a partir da cromatografia gasosa. Foram identificados seis picos de ésteres metílicos de ácidos graxos, com predominância do ácido linoleico (C18:2n-6c) e ácido oleico (C18:1n-9c). Tanto os ácidos graxos saturados quanto os insaturados foram encontrados na estrutura dos biossurfactantes. Estes resultados demonstraram a importância destes compostos para potenciais aplicações em várias áreas industriais.

Efeito da adição de óleo de licuri (Syagrus coronata) e Tween 80 em filme de amido de araruta (Maranta arundinacea L. ) / Effect of the addition of licuri oil (Syagrus coronata) and Tween 80 in a film of araruta starch (Maranta arundinacea L. )

O objetivo de trabalho foi avaliar o efeito da adição de óleo de licuri nas propriedades do filme a base de amido de araruta (bioplástico). Foram elaborados dois filmes, um conteúdo óleo de licuri e outro sem o óleo na formulação. Os filmes foram caraterizados através de analises de espessura, solubilidade, atividade de água, permeabilidade a vapor de água, ensaios de tração e analise de cor. Os resultados apontaram que o óleo de licuri reduziu a resistência á tração, o modulo de Young, a atividade de água, a solubilidade e a luminosidade dos filmes de amido de araruta. Além disso, a adição do óleo levou à um aumento da espessura e permeabilidade ao vapor de água. A adição de óleo de licuri influenciou de forma favorável algumas propriedades do filme a base de amido de araruta.

Conversion of renewable substrates for biosurfactant production by Rhizopus arrhizus UCP 1607 and enhancing the removal of diesel oil from marine soil

BACKGROUND: The use of agro-industrial wastes to produce high value-added biomolecules such as biosurfactants is a promising approach for lowering the total costs of production. This study aimed to produce biosurfactants using Rhizopus arrhizus UCP 1607, with crude glycerol (CG) and corn steep liquor (CSL) as substrates. In addition, the biomolecule was characterized, and its efficiency in removing petroderivatives from marine soil was investigated. RESULTS: A 22 factorial design was applied, and the best condition for producing the biosurfactant was determined in assay 4 (3% CG and 5% CSL). The biosurfactant reduced the surface tension of water from 72 to 28.8 mN/m and produced a yield of 1.74 g/L. The preliminary biochemical characterization showed that the biosurfactant consisted of proteins (38.0%), carbohydrates (35.4%), and lipids (5.5%). The compounds presented an anionic character, nontoxicity, and great stability for all conditions tested. The biomolecule displayed great ability in dispersing hydrophobic substrates in water, thereby resulting in 53.4 cm2 ODA. The best efficiency of the biosurfactant in removing the pollutant diesel oil from marine soil was 79.4%. CONCLUSIONS: This study demonstrated the ability of R. arrhizus UCP1607 to produce a low-cost biosurfactant characterized as a glycoprotein and its potential use in the bioremediation of the hydrophobic diesel oil pollutant in marine soil

Influence of dexamethasone and surfactant in the vitality and lung function of preterm lambs born by cesarean section / Influência da dexametasona e do surfactante na vitalidade e na função pulmonar de cordeiros prematuros nascidos por cesariana eletiva

The aim of this study was to assess the vitality and lung function of preterm lambs. Twenty seven preterm lambs were divided in four groups. Group I (n=6) preterm lambs/ control; group II (n=9) lambs born to mothers that were treated with dexamethasone antepartum; group III (n=6) lambs treated with surfactant; and group IV (n=6) lambs treated with surfactant and born to mothers that were treated with dexamethasone antepartum. The APGAR score was performed after birth (T0) and 15 minutes later (T1/4) to assess vitality. The vital signs, blood gas analysis, spirometry and capnometry were assessed immediately after birth and continued until 48 hours. Chest radiographs were performed at T0, T24 and T48. Significant rectal temperature interactions occurred at T1 and T6 depending on the type of treatment used. All animals showed low pH values, which were associated with high pCO2 values and HCO3 -values that increased over time from immediately after birth to two days of age. Higher tidal volume values were observed at T1/4, T1 and T24 when the animals were not treated with surfactant. Capnometry showed significant interactions between treatments at T0. Premature animals showed low vitality and impaired pulmonary function.(AU)

O objetivo do presente trabalho foi avaliar a vitalidade e a função pulmonar de cordeiros prematuros. Vinte e sete cordeiros foram divididos em quatro grupos: grupo I (n= 6), cordeiros prematuros/controle; grupo II (n= 9), cordeiros prematuros nascidos de mães tratadas com dexametasona antes do parto; grupo III (n= 6), cordeiros prematuros tratados com surfactante; e grupo IV (n= 6), cordeiros prematuros tratados com surfactante e nascidos de mães tratadas com dexametasona antes do parto. O escore APGAR foi realizado após o nascimento (T0) e 15 minutos depois (T1/4). Os parâmetros vitais, hemogasometria, espirometria e capnometria foram avaliados após o nascimento até 48 horas. As radiografias torácicas foram realizadas em T0, T24 e T48. Interações significativas de temperatura retal ocorreram em T1 e T6, dependendo do tipo de tratamento utilizado. Todos os animais apresentaram valores de pH baixos, que foram associados com altos valores de pCO2 e valores de HCO3 que aumentaram ao longo do tempo. Os maiores valores de volume corrente foram observados em T1/4, T1 e T24, quando os animais não foram tratados com surfactante. A capnometria mostrou interações significativas entre tratamentos em T0. Os animais prematuros apresentaram pouca vitalidade e deficiência da função pulmonar.(AU)

Biosurfactant production by Phialemonium sp. using agroindustrial wastes: influence of culture conditions

Biosurfactant are surface active compounds with emulsifying capacity and are produced by microorganisms, and they may be affected by factors related to microbial cultivation, such as pH, salinity, incubation time, carbon and nitrogen sources. The aim of this work was to study the influence of the culture conditions on the production of biosurfactants by Phialemonium sp using agroindustrial wastes. The processing parameters of temperature, humidity and pH produced the most significant effects on the production of biosurfactant and emulsifying activity. The maximum concentration of biosurfactant obtained in this study was equivalent to a surface tension reduction of 8.5 mg L-1 surfactin commercial solution using wheat bran, pH of 4.5, and 0.5% of soybean oil added at 30°C. Under these conditions, 83.4 EU g-1 of emulsifying activity, 16.4 g L-1 of emulsifier index and 18.3 U g-1 lipolytic capacity were obtained.

Influence of surfactants addition on the properties of calcium hypochlorite solutions

Abstract Objectives The aim of this study was to evaluate the influence of surfactants 0.2% or 0.1% cetrimide (Cet) or 0.008% benzalkonium chloride (BAK) on 2.5% calcium hypochlorite (Ca(OCl)2), and compare to sodium hypochlorite (NaOCl), regarding the properties of pH, free chlorine content, surface tension, contact angle, pulp dissolution and antimicrobial activity. Material and Methods The pH and free chlorine content were evaluated by digital pHmeter and by titration, respectively. Surface tension was measured by the platinum ring technique with a Du Noüy tensiometer. The solution's contact angle in human dentin surfaces was checked by Drop Shape Analyzer software. Bovine pulps were used for pulp dissolution analysis and the dissolving capacity was expressed by percent weight loss. Antimicrobial activity over Enterococcus faecalis was evaluated by the agar diffusion method. Results Surfactants addition to Ca(OCl)2 and NaOCl did not alter the pH, free chlorine content and pulp dissolution properties. Ca(OCl)2 had the highest surface tension among all tested solutions. When surfactants were added to Ca(OCl)2 and NaOCl, there was a significant reduction of surface tension and contact angle values. The addition of 0.2% or 0.1% Cet enhanced antimicrobial activity of both Ca(OCl)2 and NaOCl. Conclusion Surfactant addition to 2.5% Ca(OCl)2 has shown acceptable outcomes for pH, free chlorine content, surface tension, contact angle, pulp dissolution and antimicrobial activity. Furthermore, the addition of 0.2% Cet showed better results for all tested properties.

Study on influence of polymer and surfactant on in vitro performance of biodegradable aqueous-core nanocapsules of tenofovirdisoproxil fumarate by response surface methodology

The major objective of this study was to investigate the effect of biodegradable polymer type and surfactant concentration on various characteristics viz. particle size, entrapment efficiency and drug release rate constant of aqueous core nanocapsules (ACNs) containing tenofovirdisoproxil fumarate. In this study, the nanocapsules were prepared by modified multiple emulsion technique with biodegradable polymers viz. poly(lactide-co-glycolide) of two different grades (PLGA RG502H and PLGA RG503H) and poly lactic acid (PLA R203H); and the surfactant employed was span 80. The experiments were designed under response surface methodology by employing the Design Expert software. Entrapment efficiency, particle size and drug release rate constant were taken as response variables. The prepared nanocapsules were subjected to characterization studies and the obtained results were statistically analyzed by Analysis of Variance (ANOVA) for response surface 2-Factorial Interaction model. ANOVA studies showed that the influence of both factors on all the response variables were significant at p<0.05. The optimized formulation was found to have the entrapment efficiency of 71.58%, particle size of 252.41 nm and the drug release rate constant of 0.045 h-1; thus, indicating that the ACNs were obtained with finest characteristics. SEM studies showed that the particles were spherical.

Biosurfactant production by fungi as a sustainable alternative / Produção de biossurfactantes por fungos como uma alternativa sustentável

A wide variety of bacteria is far more exploited than fungi as biosurfactants (BS) or bioemulsifiers (BE), using renewable sources. BS are considered to be environmentally safe and offer advantages over synthetic surfactants. However, the BS yield depends largely on the metabolic pathways of the microorganisms and the nutritional medium. The production of BS or BE uses several cultural conditions, in which a small change in carbon and nitrogen sources affects the quantity of BS or BE produced. The type and quantity of microbial BS or BE produced depend mainly on the producer organism, and factors such as carbon and nitrogen sources, trace elements, temperature and aeration. The diversity of BS or BE makes it interesting to apply them in the pharmaceutical and cosmetics industries, agriculture, public health, food processes, detergents, when treating oily residues, environmental pollution control and bioremediation. Thus, this paper reviews and addresses the biotechnological potential of yeasts and filamentous fungi for producing, characterizing and applying BS or BE.(AU)

Uma grande variedade de espécies bacterianas é bem mais explorada que os fungos como agentes biossurfactantes (BS) ou bioemulsificantes (BE), usando fontes renováveis. Os BS são considerados ecologicamente seguros e oferecem vantagens sobre os surfactantes sintéticos. Entretanto o rendimento de BS depende grandemente das vias metabólicas dos micro-organismos e do meio nutricional. A produção de BS ou BE utiliza várias condições culturais, em que uma pequena alteração nas fontes de carbono e nitrogênio afeta a produção de BS. O tipo e a quantidade de BS ou BE microbianos produzidos dependem principalmente do organismo produtor e de fatores como fontes de carbono e nitrogênio, oligoelementos, temperatura e aeração. A diversidade de BS ou BE torna-os interessantes para aplicação nos campos farmacêutico, cosmético, da agricultura, da saúde pública, em processos alimentares, detergentes, no tratamento de resíduos oleosos, no controle de poluição ambiental e na biorremediação. Assim, a presente revisão aborda o potencial biotecnológico de leveduras e fungos filamentosos para produção, caracterização e aplicações de BS ou BE.(AU)

First report of the production of a potent biosurfactant with α, ß-trehalose by Fusarium fujikuroi under optimized conditions of submerged fermentation

Abstract Biosurfactants have many advantages over synthetic surfactants but have higher production costs. Identifying microorganisms with high production capacities for these molecules and optimizing their growth conditions can reduce cost. The present work aimed to isolate and identify a fungus with high biosurfactant production capacity, optimize its growth conditions in a low cost culture medium, and characterize the chemical structure of the biosurfactant molecule. The fungal strain UFSM-BAS-01 was isolated from soil contaminated with hydrocarbons and identified as Fusarium fujikuroi. To optimize biosurfactant production, a Plackett-Burman design and a central composite rotational design were used. The variables evaluated were pH, incubation period, temperature, agitation and amount of inoculum in a liquid medium containing glucose. The partial structure of the biosurfactant molecule was identified by nuclear magnetic resonance spectrometry. F. fujikuroi reduced surface tension from 72 to 20 mN m−1 under the optimized conditions of pH 5.0, 37 °C and 7 days of incubation with 190 rpm agitation. The partial identification of the structure of the biosurfactant demonstrated the presence of an α,β-trehalose. The present study is the first report of the biosynthesis of this compound by F. fujikuroi, suggesting that the biosurfactant produced belongs to the class of trehalolipids.

Production and characterization of a biosurfactant produced by Streptomyces sp. DPUA 1559 isolated from lichens of the Amazon region

Surfactants are amphipathic compounds containing both hydrophilic and hydrophobic groups, capable to lower the surface or interfacial tension. Considering the advantages of the use of biosurfactants produced by microorganisms, the aim of this paper was to develop and characterize a biosurfactant produced by Streptomyces sp. DPUA1559 isolated from lichens of the Amazon region. The microorganism was cultured in a mineral medium containing 1% residual frying soybean oil as the carbon source. The kinetics of biosurfactant production was accompanied by reducing the surface tension of the culture medium from 60 to values around 27.14 mN/m, and by the emulsification index, which showed the efficiency of the biosurfactant as an emulsifier of hydrophobic compounds. The yield of the isolated biosurfactant was 1.74 g/L, in addition to the excellent capability of reducing the surface tension (25.34 mN/m), as observed from the central composite rotational design when the biosurfactant was produced at pH 8.5 at 28°C. The critical micelle concentration of the biosurfactant was determined as 0.01 g/mL. The biosurfactant showed thermal and pH stability regarding the surface tension reduction, and tolerance under high salt concentrations. The isolated biosurfactant showed no toxicity to the micro-crustacean Artemia salina, and to the seeds of lettuce (Lactuca sativa L.) and cabbage (Brassica oleracea L.). The biochemistry characterization of the biosurfactant showed a single protein band, an acid character and a molecular weight around 14.3 kDa, suggesting its glycoproteic nature. The results are promising for the industrial application of this new biosurfactant.