A comparative study on the rheological properties of concentrated xanthan gum in combination with gum arabic or gum arabic-based emulsion.

A goal of this study is to explore the difference in rheological properties of xanthan gum (XG)-based mixtures with gum arabic (GA) or GA-based emulsion (GAE). The stability of GAE was improved by thickening with XG. The intrinsic viscosity of all mixtures decreased as GA concentration increased, implying an XG conformational transition from the disordered to the ordered form. All mixtures except for an XG-GA mixture at 6.0 % GA attained a higher consistency index value than XG alone, indicating synergistic interactions between the components. At a high GA concentration (>3.0 %), the XG-GAE mixture showed higher relative apparent viscosity values than the XG-GA mixture. All mixtures except for an XG-GA mixture at 6.0 % GA showed higher elastic modulus and lower viscous modulus values than XG alone. Consequently, all mixtures showed lower tan δ values (0.26-0.30) than XG alone (0.31). Moreover, with a high GA concentration (>1.5 %), the XG-GAE mixtures achieved lower relative tan δ values than XG-GA mixture. These results indicate that XG formed a higher weak gel-like network with GAE than GA. Overall, the findings demonstrate that the interaction between XG and GA is influenced by conformational changes in the latter in both aqueous and emulsion systems.

Dietary fiber guar gum-induced shift in gut microbiota metabolism and intestinal immune activity enhances susceptibility to colonic inflammation.

With an increasing interest in dietary fibers (DFs) to promote intestinal health and the growth of beneficial gut bacteria, there is a continued rise in the incorporation of refined DFs in processed foods. It is still unclear how refined fibers, such as guar gum, affect the gut microbiota activity and pathogenesis of inflammatory bowel disease (IBD). Our study elucidated the effect and underlying mechanisms of guar gum, a fermentable DF (FDF) commonly present in a wide range of processed foods, on colitis development. We report that guar gum containing diet (GuD) increased the susceptibility to colonic inflammation. Specifically, GuD-fed group exhibited severe colitis upon dextran sulfate sodium (DSS) administration, as evidenced by reduced body weight, diarrhea, rectal bleeding, and shortening of colon length compared to cellulose-fed control mice. Elevated levels of pro-inflammatory markers in both serum [serum amyloid A (SAA), lipocalin 2 (Lcn2)] and colon (Lcn2) and extensive disruption of colonic architecture further affirmed that GuD-fed group exhibited more severe colitis than control group upon DSS intervention. Amelioration of colitis in GuD-fed group pre-treated with antibiotics suggest a vital role of intestinal microbiota in GuD-mediated exacerbation of intestinal inflammation. Gut microbiota composition and metabolite analysis in fecal and cecal contents, respectively, revealed that guar gum primarily enriches Actinobacteriota, specifically Bifidobacterium. Guar gum also altered multiple genera belonging to phyla Bacteroidota and Firmicutes. Such shift in gut microbiota composition favored luminal accumulation of intermediary metabolites succinate and lactate in the GuD-fed mice. Colonic IL-18 and tight junction markers were also decreased in the GuD-fed group. Importantly, GuD-fed mice pre-treated with recombinant IL-18 displayed attenuated colitis. Collectively, unfavorable changes in gut microbiota activity leading to luminal accumulation of lactate and succinate, reduced colonic IL-18, and compromised gut barrier function following guar gum feeding contributed to increased colitis susceptibility.

Guar gum increased susceptibility to colitisGuar gum-induced exacerbation of colitis is gut microbiota dependentGuar gum-induced shift in microbiota composition favored the accumulation of luminal intermediate metabolites succinate and lactateGuar gum-fed mice exhibited reduced colonic level of IL-18 and tight junction molecules.Exogenous IL-18 administration partly rescued mice from guar gum-induced colitis susceptibility.

Tolerance and Safety of an Anti-Regurgitation Formula Containing Locust Bean Gum, Pre-, and Postbiotics: A Multi-Country Multi-Center Prospective Randomized Controlled Study in Infants with Regurgitation.

This multi-center prospective randomized controlled trial was a tolerance and safety study investigating the thickener locust bean gum (LBG) in infants with regurgitation, to support the re-evaluation of the safety of LBG in infant formula. The primary objective was to demonstrate that after an 8-week intervention, stool consistency was not inferior (i.e., was not looser or more watery) in infants fed an anti-regurgitation (AR) formula containing LBG vs. the stool consistency of infants fed with an unthickened control formula. A total of 103 full-term infants with regurgitation were randomized to the test or control formula. The test formula contained LBG (0.4 g/100 mL), short-chain galacto-oligosaccharides, and long-chain fructo-oligosaccharides (scGOS/lcFOS; 9:1; 0.4 g/100 mL) and postbiotics and the control formula contained scGOS/lcFOS (0.8 g/100 mL), the same amount of postbiotics, and did not contain LBG. The average stool consistency score at the 8th intervention week was the primary outcome parameter. Secondary outcome parameters were stool consistency at other timepoints, stool frequency, Infant Gastrointestinal Symptom Questionnaire (IGSQ) score, growth, (serious) adverse events ([S]AEs), regurgitation severity, and infant well-being. Overall, the infants were 36.9 ± 12.9 [mean ± SD] days old, 62.7% girls in the test, and 50.0% girls in the control group. The primary analysis showed that the test group did not have looser or more watery stools than the control group. IGSQ sum scores decreased comparably in both groups. The frequency of regurgitation was significantly lower in the test group compared to the control group (mixed model repeated measurement, p ≤ 0.028) and parent-reported well-being scores were favorable. Adequate growth was observed in both groups. Both products were well-tolerated and safe and the AR formula with LBG was efficacious in reducing regurgitation frequency. This study provides further evidence for the dietary management of regurgitation by LBG-containing formulae in infants who are not exclusively breastfed, and the reassurance it can bring to parents.

Assessment and Optimization of the Insecticidal Properties of γ-Al2O3 Nanoparticles Derived from Mentha pulegium By-Products to Xylosandrus crassiusculus (Carob Beetle).

This study concentrates on assessing the insecticidal attributes of the γ-Al2O3 nanoparticles derived from the remnants of Mentha pulegium, which include essential oil, ethanolic extract, and plant waste. The synthesis of the γ-Al2O3 nanoparticles was executed using a direct sol-gel procedure, affirming the crystal structure according to extensive physicochemical analyses such as UV-Vis, XRD, FTIR, and SEM. Evaluation of the insecticidal activity in vitro was conducted against Xylosandrus crassiusculus, a pest that infests carob wood, utilizing strains from diverse forests in the Khenifra region, situated in the Moroccan Middle Atlas. The lethal doses 50 ranged from 40 mg/g to 68 mg/g, indicating moderate effectiveness compared to the commercial insecticide Permethrin. Optimization of the conditions for the efficiency of the γ-Al2O3 nanoparticles was determined using experimental plans, revealing that time, humidity, and temperature were influential factors in the lethal dose 50 of these nanomaterials. Moreover, this study encompasses the establishment of correlations using Principal Component Analysis (PCA) and Ascending Hierarchical Classification (AHC) among various geographic, biological, and physical data, amalgamating geographic altitude and γ-Al2O3 nanoparticle insecticide parameters, as well as the attributes of the mechanical tests conducted on the carob wood affected by insects. The correlations highlight the close connections between the effectiveness of the insecticide, mountain altitude, and the mechanical parameters that were examined. Ultimately, these nanoparticles demonstrate promising potential as alternative insecticides, thus opening up encouraging prospects for safeguarding against carob wood pests.

Starch microsphere silicon-boron crosslinker for low concentration hydroxypropyl guar gum based fracturing fluid.

Hydroxypropyl guar gum (HPG) is a critical thickener to increase viscosity and lubrication to improve the water-based hydraulic fracturing efficiency. However, current crosslinkers require a large amount of HPG (>0.3 wt%) to form gel with sufficient viscosity, and high concentrations of HPG may cause adverse effects to the production and the environment. In this study, a novel starch microsphere silica­boron crosslinker (SMSB) was developed using starch microspheres as a carrier and γ-aminopropyl triethoxy silane (KH550) as a modifier with an in-house method. Both the rheology and surface reactions of the SMSB-HPG crosslinking system were studied using multiple laboratory experiments and molecular dynamics simulation. The results showed that SMSB crosslinker caused multi-site cross-linking with low concentration (only 0.2 wt%) of HPG molecules, reducing the twisting of single molecular chain in the crosslinking system, enhancing the cross-linking strength between molecular chains, and making HPG molecular chains stretcher in the aqueous solution. The apparent viscosity and viscoelasticity of the HPG system were substantially higher than the organoboron crosslinker, and the temperature resistance of the SMSB-HPG crosslinking system was up to 140 °C. This study provides an alternative green crosslinker for more sustainable industrial applications and provides theoretical basis for the modification of biomaterials.

Recent updates on guar gum derivatives in colon specific drug delivery.

Colon specific delivery of therapeutics have gained much attention of pharmaceutical researchers in the recent past. Colonic specific targeting of drugs is used not only for facilitating absorption of protein or peptide drugs, but also localization of therapeutic agents in colon to treat several colonic disorders. Among various biopolymers, guar gum (GG) exhibits pH dependent swelling, which allows colon specific release of drug. GG also shows microbial degradation in the colonic environment which makes it a suitable excipient for developing colon specific drug delivery systems. The uncontrolled swelling and hydration of GG can be controlled by structural modification or by grafting with another polymeric moiety. Several graft copolymerized guar gum derivatives are investigated for colon targeting of drugs. The efficacy of various guar gum derivatives are evaluated for colon specific delivery of drugs. The reviewed literature evidenced the potentiality of guar gum in localizing drugs in the colonic environment. This review focuses on the synthesis of several guar gum derivatives and their application in developing various colon specific drug delivery systems including matrix tablets, coated formulations, nano or microparticulate delivery systems and hydrogels.

Pimobendan controlled release guar gum printlets: Tailoring drug doses for personalised veterinary medicines.

Treating chronic heart diseases in dogs is challenging due to variations in mass within and between species. Pimobendan (PBD), a veterinary drug only, is prescribed in specific cases of chronic heart disease in dogs and is available on the market in only a few different doses. Furthermore, the therapy itself is challenging due to the large size of the chewable tablets and the requirement for twice-daily administration. The development of customised and on-demand PBD medicines by three-dimensional (3D) printing has been proposed to circumvent these disadvantages. In this study, we designed controlled-release flavoured printlets containing PBD. We evaluated the use of two natural polymers, guar or xanthan gums, as the main component of the printing inks. Guar gum showed the better rheological behavior and printability by semisolid extrusion. The printlets were produced in three different shapes and sizes to allow dose customisation. Guar gum printlets showed a PBD controlled release profile, regardless of their shape or size. Therefore, we have demonstrated a novel approach for controlling PBD drug release and tailoring the dose by employing a natural polymer to produce 3D-printed tablets. This study represents a significant step towards the development of 3D-printed guar gum controlled-release formulations for veterinary applications.

Plant gums in Pickering emulsions: A review of sources, properties, applications, and future perspectives.

Recently, there has been an increasing research interest in the development of Pickering emulsions stabilized with naturally derived biopolymeric particles. In this regard, plant gums, obtained as plant exudates or from plant seeds, are considered promising candidates for the development of non-toxic, biocompatible, biodegradable and eco-friendly Pickering stabilizers. The main objective of this review article is to provide a detailed overview and assess the latest advances in the formulation of Pickering emulsions stabilized with plant gum-based particles. The plant gum sources, types and properties are outlined. Besides, the current methodologies used in the production of plant gum particles formed solely of plant gums, or through interactions of plant gums with proteins or other polysaccharides are highlighted and discussed. Furthermore, the work compiles and assesses the innovative applications of plant gum-based Pickering emulsions in areas such as encapsulation and delivery of drugs and active agents, along with the utilization of these Pickering emulsions in the development of active packaging films, plant-based products and low-fat food formulations. The last part of the review presents potential future research trends that are expected to motivate and direct research to areas related to other novel food applications, as well as tissue engineering and environmental applications.

Film-Forming, Moisturizing, and Sensory Properties of a Cosmetic Formulation Containing Tara Gum and Brazilian Berry Extracts.

The development of cosmetic formulations with moisturizing and film-forming properties has been very important to help keep skin physiology and protection. In this context, this study aimed to develop a cosmetic formulation containing Tara gum and Brazilian berry extract and evaluate its physical-mechanical, film-forming, and sensory properties. A gel formulation was developed based on Tara gum added to Plinia cauliflora extract and was characterized by its spreadability profile and sensory properties. A clinical study was carried out with ten participants to evaluate the skin microrelief, stratum corneum water content, transepidermal water loss (TEWL), and skin morphological characteristics by reflectance confocal microscopy (RCM) before and after 2 h of application of the formulations. The formulation with Brazilian berry significantly decreased the work of shear parameter, which can be correlated with improved spreadability in the sensory analysis. The clinical study showed that both formulations improved skin hydration and reduced the TEWL. The RCM imaging analysis showed the visible film on the skin surface, a decrease in the size of furrows, an increase in the reflectance of the interkeratinocytes, and reflectance of the stratum corneum for both formulations. These results were more pronounced for the formulation containing Brazilian berry. The Tara gum in the gel formulation promoted the formation and visualization of a polymeric net on the stratum corneum surface, demonstrated by the images obtained from RCM. However, the formulation added with the Brazilian berry extract improved the skin microrelief, honeycomb pattern of the epidermis, and skin hydration in deeper layers of the epidermis.

Synergistic impact of natural gums and crosslinkers on the properties of oilseed meals based biopolymeric films.

The waste material utilization from available agricultural resources can be beneficial in the field of economic, social, and environmental well-being. One of the main industrial crops used to manufacture oil from oilseeds worldwide is agricultural waste, such as the cake made from oilseeds. In this study, de-oiled cakes are used to create biopolymeric films. Three widely accessible oilseed meals viz. flaxseed, soybean, and mustard were gathered, ground, and sieved. A film forming suspension of defatted meals along with natural gums (acacia and xanthan gum) and crosslinkers (citric acid and glutaraldehyde) were formed. The suspension was cast into petri dishes and dried to produce smooth and even films. The physical, functional, color, thermal and morphological properties of the oilseed meals-gums crosslinked biopolymeric film were evaluated and statistical analysis was performed. The solubility was found to be decreased and tensile strength was increased with the addition of citric acid and increase in tensile strength. There was significant difference observed in the values of elongation at break after addition of citric acid as crosslinker. The research shows how oilseed meals enriched with natural gum and crosslinkers may be converted into biopolymeric films, which can then be used in food packaging to lessen reliance on petroleum-based, non-biodegradable plastics.

Effects of synergistic modification using alkalis and guar gum on the pasting, rheological, and microstructural properties of germinated highland barley starch gels.

Germination treatment of highland barley enhances its nutritional value while weakening the starch gel properties. This study aims to enhance the characteristics of germinated highland barley starch (GBS) by exploring the synergistic effects of two alkalis (Na2CO3 and NaHCO3) and guar gum (GG) on GBS gel properties. The combined action of alkalis and GG significantly improved the peak viscosity, setback viscosity, and hardness compared with GG alone. The highest G' and G" reached 998 and 204 Pa at 0.4% Na2CO3 addition, which were increased by nearly 44% and 50%, respectively. Fourier-transform infrared spectral analysis revealed that the alkalis strengthened interaction forces, particularly with intensified absorption peaks at 3200-3700 cm-1 and 1550-1750 cm-1. The Na2CO3 and NaHCO3 reduced the spin-spin relaxation time (T2), resulting in a dense starch gel network. This study contributes to enhancing the market application of GBS and offers innovative insights for modifying other starches.

Seed gum-based polysaccharides hydrogels for sustainable agriculture: A review.

Globally, water scarcity in arid and semiarid regions has become one of the critical issues that hinder sustainable agriculture. Agriculture, being a major water consumer, presents several challenges that affect water availability. Hydrogels derived from polysaccharides seed gums are hydrophilic polymers capable of retaining substantial moisture in their three-dimensional network and releasing it back into the soil during drought conditions. Implementation of hydrogels in the agricultural sectors enhances soil health, plant growth, and crop yield. Furthermore, the soil permeability, density, structure, texture, and rate of evaporation and percolation of water are modified by hydrogel. In this review, hydrogels based on natural plant seed gum like guar, fenugreek, Tara and locust beans have been discussed in terms of their occurrence, properties, chemical structure, method of synthesis, and swelling behavior. The focus extends to recent applications of modified seed gum-based natural hydrogels in agriculture, serving as soil conditioners and facilitating nutrient delivery to growing plants. The swelling behavior and inherent structure of these hydrogels can help researchers unravel their maximum possibilities to promote sustainable agriculture and attenuate the obstacles propounded by our dynamic nature. The current review also examines market growth, prospects, and challenges of eco-friendly hydrogels in recent times.

Ag Nanoparticle Incorporated Guar Gum-Sodium Alginate-I-Carrageenan Tribiopolymer Blended Cloth Waste Lint Extracted Cellulose Nanocrystal Antimicrobial Composite Film.

A biopolymer-based formulation for robust and active food packaging material was developed. This material consisted of a blend of three biopolymers (guar gum-sodium alginate-i-carrageenan) reinforced by cellulose nanocrystals (CNC) alongside the integration of silver nanoparticles (AgNPs) with varying sizes. The CNC utilized in this process was derived from cloth waste lint (CWL) generated from a household cloth dryer machine. This CNC synthesis underwent a series of solvent treatments to yield the CNC used in the composite. CNC and AgNPs were incorporated into the tribiopolymeric blend matrix to construct a nanocomposite film that showed excellent tensile strength (∼90 MPa). The nanocomposite film also exhibited antimicrobial activity against Escherichia coli ATCC 25922 and Bacillus cereus MTCC 1272. In this report, it was demonstrated that the zone of inhibition against E. coli and B. cereus depends on the variation of size and amount of AgNPs inside the polymeric matrix. The practical applicability of such a film was also demonstrated by applying it to sliced bread and the enhancement of the shelf life of the raped bread was compared with a control. Thus, the guar gum-sodium alginate-i-carrageenan tribiopolymer blend with a cloth waste lint extracted cellulose nanocrystal composite film is antimicrobial, hence, an excellent candidate as an active packaging film.

Formulization and characterization of guar gum and almond gum based composite coating and their application for shelf-life extension of okra (Hibiscus esculentus).

The current novel study aims was to development and characterization of gum based (guar gum: almond gum) composite formulations with or without addition of oregano essential oils to extend the shelf life of okra at ambient condition. In this study, the optimized composite of guar gum: almond gum (75:25 V/V) prepared with addition of different concentrations (0.05, 0.1 and 0.15 % (V/V) of oregano essential oils to study their physicochemical, rheological, antimicrobial and particle size & zeta potential distribution. In addition, the effects of prepared edible coatings on shelf-life of okra vegetables were also investigated by assessing their postharvest quality attributes at ambient (23 °C) storage up to 7 days storage. The results revealed, increasing concentration of essential oils in composite coating significantly increased in pH, TSS, particle size, antimicrobial (Apergillus. niger, Escherichia coli, Staphylococcus aureus) activity respectively. Furthermore, the increasing EOs improved viscosity (n) and stability of the coatings matrix. In addition, the applications of guar gum (0.25 %): almond gum (0.5 %) composite ratio (75,25) with oregano essential oils exhibited excellent properties and potential to maintain the postharvest characteristics of okra throughout the storage period. The results of this study revealed that the addition of higher concentration (0.15 %) of essential oils in composite formulation of 75 % guar gum +25 % almond gum (03) showed higher value of pH (5.45), antioxidant activity (20.87 %), particle size (899.1 nm), zeta potential (-8.6 mV), polydispersity index (50.6 %) and higher antimicrobial activity against E.coli (19 mm), S. aureus (29 mm) and A. niger (35 mm) as compared to other formulations. Therefore, the lower composite formulation (01) with lower concentration (0.05 %) of oregano essential oil was found most effective formulation to maintain the shelf life of okra for up to 4 days as compared to other treated and control okra samples at ambient temperature by retarded the weight loss (12.74 %), maintained higher firmness (0.998 N), lower respiration rate (484.32 ml Co2/kg/h) respectively on 7 days of storage. The microbial load in the okra samples treated with different guar gum: almond gum composite showed lower microbial load in terms of total plate count and yeast & mold counts as compared to control samples. Samples treated with O3 coating showed lowest TPC (0.1 × 108 cfu/g) and YMC (6.63 × 106 cfu/g) followed by O2 (0.48 × 108 cfu/g, 7.9 × 106 cfu/g) and O1 (0.78 × 108 cfu/g, 9.45 × 106 cfu/g) respectively on 6rd day of storage, overall results indicated that the application of composite coating with different concentrations of oregano essential oils were effective to maintained postharvest shelf life of okra up to 4 days at ambient condition.

Carboxymethyl hydroxypropyl guar gum physicochemical properties in dilute aqueous media.

We investigate carboxymethyl hydroxypropyl guar gum (CMHPG) solution properties in water and NaCl, KCl, and CaCl2 aqueous solutions. The Huggins, Kraemer, and Rao models were applied by fitting specific and relative viscosity of CMHPG/water and CMHPG/salt/water to determine the intrinsic viscosity [η]. The Rao models yielded better results (R2 = 0.779-0.999) than Huggins and Kraemer equations. [η] decreased up to 84% in salt solution over the range 0.9-100 mM compared to water. Salt effects screened the CMHPG charged side groups chains leading to a compacted structure. In 0.9 mM NaCl(aq), the hydrodynamic coil radius (Rcoil) was 28% smaller and 45% smaller in 100 mM NaCl solution relative to water. Similar decreases were seen in KCl and CaCl2 solutions. KCl and CaCl2 were more effective than NaCl. CMHPG is salt-tolerant and shows comparatively less viscosity change than native guar gum, with modest reduced viscosity increases with CMHPG dilution at all salt concentrations. The electrostatic interactions were effective up to 100 mM salt. The activation energy of viscous flow for CMHPG solutions was computed and compared to measured xanthan gum and several literature values. These data show that the barrier to CMHPG flow is higher than for xanthan gum.

Tamarind seed polysaccharide-guar gum buccal films loaded with resveratrol-bovine serum albumin nanoparticles: Preparation, characterization, and mucoadhesiveness assessment.

Mucoadhesive films based on tamarind seed polysaccharide and guar gum (TSP-GG) were formulated for buccal delivery of resveratrol. Resveratrol-bovine serum albumin nanoparticles (Res-BSA) were prepared and dispersed in TSP-GG to improve its buccal mucoadhesiveness. The impregnation of Res-BSA induced the dense internal structures of TSP-GG and improved its strength and rigidity. Structural characterization showed that resveratrol existed in an amorphous state in the films containing Res-BSA, and hydrogen bonding was formed between Res-BSA and the film matrices. The films containing Res-BSA exhibited good uniformity in thickness, weight, and resveratrol content, and their surface pH was near neutral, ranging between 6.78 and 7.09. Increasing Res-BSA content reduced the water contact angle of TSP-GG (from 75.9° to 59.6°). The swelling and erosion studies indicated the favorable hydration capacity and erosion resistance of the films containing Res-BSA. Additionally, the addition of Res-BSA imparted enhanced ex vivo mucoadhesive force, in the range of 1.53 N to 1.98 N, and extended ex vivo residence time, between 17.9 h and 18.9 h, to TSP-GG. The current study implied that the composite systems of TSP-GG and Res-BSA may be a novel platform for buccal mucosal delivery of resveratrol.

Development of guar gum reinforced calcium magnesium phosphate-based bone biocement.

This study aims at developing a calcium magnesium phosphate-based bone biocement that combines a natural polymer and regenerative properties of bone bonding materials. The formulation of this biocement consists of oxidized guar gum, polydopamine, and calcium magnesium phosphate. The oxidized guar gum is easily soluble in water and has a slightly basic pH, unlike unmodified guar gum, thus allowing a homogenous paste to form in the alkaline environment of calcium magnesium phosphate. Three different oxidized degrees of guar gum were made, and the impact on the biocement properties was studied. The modified guar gum-reinforced biocement (OGG C2) displayed higher mechanical strength and lower degradation rates than OGG B1 and OGG A0. Furthermore, samples with polydopamine exhibited better results, thus, improving the already reinforced biocement. Morphological studies of the biocement displayed a highly porous structure with porosity varying among biocement containing different oxidized guar gum and polydopamine levels.

Banana fibre-chitosan-guar gum composite as an alternative wound healing material.

Bio-composites, which can be obtained from the renewable natural resources, are fascinating material for use as sustainable biomaterials with essential properties like biodegradable, bio-compatibility as well cyto-compatibility etc. These properties are useful for bio-medical including wound healing applications. In this study, fibre obtained banana pseudo stem of banana plant, which is otherwise wasted, was used as a material along with chitosan and guar gum to fabricate a banana fibre-biopolymer composite patch. The physiochemical properties of the patches were examined using Fourier Transformed Infra-red spectrophotometer (FT-IR), tensile tester, Scanning Electron Microscope (SEM), contact angle tester, swelling and degradation studies. We further demonstrated that a herbal drug, Nirgundi could be loaded to the patch showed controlled its release at different pHs. The patch had good antibacterial property and supported proliferation of mouse fibroblast cells. The study thus indicates that banana fibre-chitosan-guar gum composite can be developed into an alternative wound healing material.

Tannic acid crosslinked chitosan-guar gum composite films for packaging application.

Chitosan (CH)-guar gum (GG) composite films crosslinked with tannic acid (TnA) were prepared by solution casting method. The films were then immersed in 5 % aqueous NH3 and dried again. They were characterized by IR spectroscopy, wide angle x-ray diffraction and thermogravimetric analysis. All the films were studied for physicochemical properties such as moisture content, swelling, solubility in water, water contact angle, water vapor permeability, opacity, tensile strength and antioxidant activity. The physicochemical and mechanical properties of films changed significantly when compared to CH as reflected by an increase in the amorphous domains of the films, a decrease in moisture content, swelling and solubility in water. The films turned hydrophobic with concomitant decrease in moisture content, swelling, water-solubility and exhibited improved UV absorption as well as mechanical strength, which in turn was dependent on the tannic acid concentration. These results along with enhanced antioxidant properties, UV absorption with no significant change in water vapor permeation compared to CH suggested that the films could find application in packaging applications.

Isolation, structural characterization and biological activity evaluation of melanoidins from thermally processed cocoa beans, carob kibbles and acorns as potential cytotoxic agents.

The aim of this study was to determine the chemical structure and biological activity of melanoidin fractions derived from cocoa beans, carob kibbles, and acorns roasted at different temperature-time conditions. The results showed that plant origin and roasting conditions had significant effects on the chemical composition, structural features, and morphology of melanoidins. All tested melanoidins exhibited significant antioxidant properties in three in vitro assays. In addition, they show significant in vitro anti-inflammatory activity by reducing lipoxygenase. The results from MTT assay showed that the all studied melanoidins had a cytotoxic effect against SW-480 cells in a dose- and time-dependent manner. Furthermore, the most pronounced activity was observed for acorn melanoidins. This is a unique finding, as the specific cytotoxic effect has not been reported for cocoa, carob and acorn melanoidins, and opens up a great opportunity to develop a potential novel cytotoxic agent against deadly colon cancer in the future.