[Nutritional components of 5 potatoes in Anqing City in 2021].

OBJECTIVE: To analyze the nutrient composition and nutritional value evaluation of 5 potatoes in Anqing City. METHODS: According to the requirements of the Technical Manual for Food Composition Monitoring Projects, 5 types of potato samples were collected from Anqing City, Anhui Province. National standard detection method were used to determine the nutritional components such as water, ash, protein, fat, dietary fiber, sugar, minerals, vitamins, and amino acids in the samples. The index of nutritional quality(INQ) method was used to evaluate proteins, vitamins, and minerals, and the amino acid scoring standard mode(FAO/WHO mode) was used to evaluate the nutritional value of amino acids. RESULTS: Among the 5 types of potatoes, purple potato had the highest protein(2.3 g/100 g) and dietary fiber content(3.6 g/100 g). Sweet potato(red) had the highest carotene content(4003 µg/100 g), sweet potato(white) had the highest content of vitamin C(15.4 mg/100 g). Sugar in potatoes mainly existed in three forms: fructose, glucose, and sucrose; Purple potatoes had the highest levels of calcium(47 mg/100 g) and phosphorus(74 mg/100 g), respectively. Potatoes(white) had the highest content of potassium(401 mg/100 g), while sweet potatoes(red) had the highest content of magnesium(31 mg/100 g). Sodium(104.0 mg/100 g), iron(0.9 mg/100 g), copper(0.17 mg/100 g), and manganese(0.40 mg/100 g) had the highest content in sweet potatoes(white). The Na/K ratio range of the 5 potato varieties was 0.003-0.456, and the INQ of phosphorus, potassium, magnesium, copper, and manganese were greater than 1. The detection result of 5 potatoes all contain 18 amino acids, and aspartic acid was the highest. The amino acid score(AAS) was 0.29-1.35, and the ratio coefficient(RC) was 0.47-1.69. CONCLUSION: The 5 types of potatoes are rich in dietary fiber, vitamin C and minerals, and belong to the high potassium and low sodium type of food. Potatoes can meet the daily needs of the human body for phosphorus, potassium, magnesium copper, and manganese elements. Lysine is rich in content and can be used as a nutritional supplement for grains. The AAS score and RC are close to 1, and the AAS evaluation mode is closer to the human amino acid composition mode, which can meet the daily needs of the human body for this essential amino acid.

Electrochemiluminescent properties of carbon nitride nanoflowers and their application to the detection of melatonin in foods.

Carbon nitride nanoflower materials (CNNFs) modified electrodes were prepared and used as electrochemiluminescence (ECL) sensors for the sensitive detection of melatonin (MT) in food. The luminescence intensity of CNNFs is increased by 4.6 times compared with bulk g-C3N4. In addition, the effect of dissolved oxygen on the material was eliminated, and the stability of ECL intensity of CNNFs was improved. Under the optimal experimental conditions, there is a good linear relationship between the ECL intensity ratio and logCMT in a concentration range of 2.0 × 10-11-1.0 × 10-6 mol/L, and the detection limit is 6.2 × 10-13 mol/L. This experiment has been successfully used for the detection of MT in rice, black rice, oats, apples, bananas, grapes, carrots, tomatoes, cucumbers, bread, and beers. The results are consistent with those obtained by high-performance liquid chromatography (HPLC). Therefore, this sensor is a sensitive and effective method for detecting MT content in food.

Advanced Dielectric Materials for Triboelectric Nanogenerators: Principles, Methods, and Applications.

Triboelectric nanogenerator (TENG) manifests distinct advantages such as multiple structural selectivity, diverse selection of materials, environmental adaptability, low cost, and remarkable conversion efficiency, which becomes a promising technology for micro-nano energy harvesting and self-powered sensing. Tribo-dielectric materials are the fundamental and core components for high-performance TENGs. In particular, the charge generation, dissipation, storage, migration of the dielectrics, and dynamic equilibrium behaviors determine the overall performance. Herein, a comprehensive summary is presented to elucidate the dielectric charge transport mechanism and tribo-dielectric material modification principle toward high-performance TENGs. The contact electrification and charge transport mechanism of dielectric materials is started first, followed by introducing the basic principle and dielectric materials of TENGs. Subsequently, modification mechanisms and strategies for high-performance tribo-dielectric materials are highlighted regarding physical/chemical, surface/bulk, dielectric coupling, and structure optimization. Furthermore, representative applications of dielectric materials based TENGs as power sources, self-powered sensors are demonstrated. The existing challenges and promising potential opportunities for advanced tribo-dielectric materials are outlined, guiding the design, fabrication, and applications of tribo-dielectric materials.

Inorganic perovskite-based active multifunctional integrated photonic devices.

The development of highly efficient active integrated photonic circuits is crucial for advancing information and computing science. Lead halide perovskite semiconductors, with their exceptional optoelectronic properties, offer a promising platform for such devices. In this study, active micro multifunctional photonic devices were fabricated on monocrystalline CsPbBr3 perovskite thin films using a top-down etching technique with focused ion beams. The etched microwire exhibited a high-quality micro laser that could serve as a light source for integrated devices, facilitating angle-dependent effective propagation between coupled perovskite-microwire waveguides. Employing this strategy, multiple perovskite-based active integrated photonic devices were realized for the first time. These devices included a micro beam splitter that coherently separated lasing signals, an X-coupler performing transfer matrix functions with two distinguishable light sources, and a Mach-Zehnder interferometer manipulating the splitting and coalescence of coherent light beams. These results provide a proof-of-concept for active integrated functionalized photonic devices based on perovskite semiconductors, representing a promising avenue for practical applications in integrated optical chips.

High Q-Factor Single-Mode Lasing in Inorganic Perovskite Microcavities with Microfocusing Field Confinement.

The realization of high-Q single-mode lasing on the microscale is significant for the advancement of on-chip integrated light sources. It remains a challenging trade-off between Q-factor enhancement and light-field localization to raise the lasing emission rate. Here, we fabricated a zero-dimensional perovskite microcavity integrated with a nondamage pressed microlens to three-dimensionally tailor the intracavity light field and demonstrated linearly and nonlinearly (two-photon) pumped lasing by this microfocusing configuration. Notably, the microlensing microcavity experimentally achieves a high Q-factor (16700), high polarization (99.6%), and high Purcell factor (11.40) single-mode lasing under high-repetition pulse pumping. Three-dimensional light-field confinement formed by the microlens and plate microcavity simultaneously reduces the mode volume (∼3.66 µm3) and suppresses diffraction and transverse walk-off loss, which induces discretization on energy-momentum dispersions and spatial electromagnetic-field distributions. The Q factor and Purcell factor of our lasing come out on top among most of the reported perovskite microcavities, paving a promising avenue toward further studying electrically driven on-chip microlasers.

Mechanistic study of C5F10O-induced lung toxicity in rats: An eco-friendly insulating gas alternative to SF6.

The global warming and other environmental problems caused by SF6 emissions can be reduced due to the widespread use of eco-friendly insulating gas, perfluoropentanone (C5F10O). However, there is an exposure risk to populations in areas near C5F10O equipment, so it is important to clarify its biosafety and pathogenesis before large-scale application. In this paper, histopathology, transcriptomics, 4D-DIA proteomics, and LC-MS metabolomics of rats exposed to 2000 ppm and 6000 ppm C5F10O are analyzed to reveal the mechanisms of toxicity and health risks. Histopathological shows that inflammatory cell infiltration, epithelial cell hyperplasia, and alveolar atrophy accompanied by alveolar wall thickening are present in both low-dose and high-dose groups. Analysis of transcriptomic and 4D-DIA proteomic show that Cell cycle and DNA replication can be activated by both 2000 ppm and 6000 ppm C5F10O to induce cell proliferation. In addition, it also leads to the activation of pathways such as Antigen processing and presentation, Cell adhesion molecules and Complement and coagulation cascades, T cell receptor signal path, Th1 and T cell receptor signal path, Th1 and Th2 cell differentiation, complement and coagulation cascades. Finally, LC-MS metabolomics analysis confirms that the metabolic pathways associated with glycerophospholipids, arachidonic acid, and linoleic acid are disrupted and become more severe with increasing doses. The mechanism of lung toxicity caused by C5F10O is systematically expounded based on the multi-omics analysis and provided biosafety references for further promotion and application of C5F10O.

Nomogram for the prediction of tigecycline-induced hypofibrinogenaemia in a Chinese population.

BACKGROUND: Tigecycline has been widely used for multi-drug-resistant bacterial infections in China. Although many studies have reported the risk factors for tigecycline-induced hypofibrinogenaemia, it remains unknown whether valproic acid or voriconazole in combination with tigecycline is associated with the decrease in fibrinogen, as both drugs could lead to coagulation disorders. The aim of this study was to develop a nomogram for the prediction of tigecycline-induced hypofibrinogenaemia. METHODS: This was a multi-centre retrospective case-control study. The primary outcome was the accurate prediction of tigecycline-induced hypofibrinogenaemia. Nomograms were developed from logistic regression models with least absolute shrinkage and selection operator regression for variable selection. Model performance was assessed via calibration plots, and models were validated internally using bootstrapping on a validation cohort. RESULTS: In total, 2362 patients were screened, of which 611 were eligible for inclusion in this study. These 611 patients were divided into the training cohort (n=488) and the validation cohort (n=123). Predictors included in the nomogram for the total population were total dose, age, fibrinogen, prothrombin time (PT), comorbidity, and concomitant use of voriconazole. Total dose, fibrinogen, PT, activated partial thromboplastin time, white blood cell count, and concomitant use of voriconazole were selected to predict hypofibrinogenaemia in patients with malignant haematologic diseases. Both models were calibrated adequately, and their predictions were correlated with the observed outcome. The cut-offs for treatment duration in the total population and the subgroup were 10 and 6 days, respectively. CONCLUSIONS: Tigecycline in combination with voriconazole could increase the risk of hypofibrinogenaemia, and tigecycline-induced hypofibrinogenaemia is more likely to occur in patients with malignant haematologic diseases.

Adsorption and Sensing of SF6 Decomposition Products by a Pd-Doped MoTe2 Monolayer: A First-Principles Study.

The detection of sulfur hexafluoride (SF6) decomposition components has become one of the best ways to diagnose early latent insulation faults in gas-insulated equipment, which can effectively prevent sudden accidents by identifying such faults. In this paper, we by first-principles theory investigated the adsorption and sensing behaviors of four typical SF6 decomposition components (H2S, SO2, SOF2, and SO2F2) on the pristine Pd-doped MoTe2 monolayer. The adsorption energy, work function, recovery time, charge density difference, density of state, and band structure of the adsorption structures are obtained as well as analyzed. The results indicate that the Pd dopant prefers to be trapped at the TMo site, with a binding energy of -2.25 eV. The Pd-MoTe2 chemisorbs the remaining gases except SO2xF2, with the adsorption capacity ranking as SOF2 > SO2 > H2S. The adsorption of gas molecules reduces the bandgap of Pd-MoTe2, thereby increasing conductivity. On the other hand, the recovery time of the Pd-MoTe2 monolayer material at a temperature of 398 K demonstrates its excellent gas desorption performance toward four decomposition gases. The research results provide a theoretical basis for Pd-MoTe2 to detect SF6 decomposition components, thus, promoting the stable operation of the power system.

Comparison of bleeding risk and hypofibrinogenemia-associated risk factors between tigecycline with cefoperazone/sulbactam therapy and other tigecycline-based combination therapies.

Background: Tigecycline and cefoperazone/sulbactam can cause coagulation disorders; tigecycline may also lead to hypofibrinogenemia, raising safety concerns. This study aimed to investigate whether tigecycline plus cefoperazone/sulbactam increases the risk of bleeding compared with other tigecycline-based combination therapies and identify risk factors for tigecycline-associated hypofibrinogenemia. Methods: In this multi-method, multicenter, retrospective study, coagulation and other baseline variables were compared using a cohort study, and risk factors for hypofibrinogenemia using a case-control study. Results: The 451 enrolled participants were divided into three group: tigecycline plus cefoperazone/sulbactam (Group A, 193 patients), tigecycline plus carbapenems (Group B, 200 patients) and tigecycline plus ß-lactams without N-methylthio-tetrazole (NMTT) side chains (Group C, 58 patients). Activated partial thromboplastin time and prothrombin time were prolonged, and fibrinogen declined for all patients after tigecycline-based medication (all p < 0.05). Prothrombin time in Group B was significantly longer than in other groups (p < 0.05), but there were no significant differences in bleeding events between the three groups (p = 0.845). Age greater than 80 years (OR: 2.85, 95% CI: 1.07-7.60), treatment duration (OR: 1.29, 95% CI: 1.19-1.41), daily dose (OR: 2.6, 95% CI: 1.29-5.25), total bilirubin (OR: 1.01, 95% CI: 1.01-1.02) and basal fibrinogen (OR: 1.32, 95% CI: 1.14-1.63) were independent risk factors of hypofibrinogenemia. The optimal cut-off for treatment course was 6 days for high-dose and 11 days for low-dose. Conclusion: Tigecycline plus cefoperazone/sulbactam did not increase the risk of bleeding compared with tigecycline plus carbapenem, or tigecycline plus ß-lactam antibiotics without NMTT-side-chains. Coagulation function should be closely monitored in patients receiving tigecycline treatment.

Optoelectronic Devices of Large-Scale Transferred All-Inorganic Lead Halide Perovskite Thin Films.

We report the large-scale transfer process for monocrystalline CsPbBr3 thin films prepared by chemical vapor deposition (CVD) with excellent optical properties and stability. The transfer process is robust, simple, and effective, in which CsPbBr3 thin films could be transferred to several substrates and effectively avoid chemical or physical fabrication processes to damage the perovskite surface. Moreover, the transfer process endows CsPbBr3 and substrates with atomically clean and electronically flat interfaces. We utilize this transfer process to realize several optoelectronic devices, including a photonic laser with a threshold of 61 µJ/cm2, a photodetector with a responsivity of 2.4 A/W, and a transistor with a hole mobility of 11.47 cm2 V-1 s-1. High device performances mainly originate from low defects of high-quality single-crystal perovskite and seamless contact between CsPbBr3 and target substrates. The large-scale nondestructive transfer process provides promising opportunities for optoelectronic applications based on monocrystalline perovskites.

Electrostatic Epitaxy of Orientational Perovskites for Microlasers.

Orientational growth of single-crystalline structures is pivotal in the semiconductor industry, which is achievable by epitaxy for producing thin films, heterostructures, quantum wells, and superlattices. Beyond silicon and III-V semiconductors, solution-processible semiconductors, such as metal-halide perovskites, are emerging for scalable and cost-effective manufacture of optoelectronic devices, whereas the polycrystalline nature of fabricated structures restricts their application toward integrated devices. Here, electrostatic epitaxy, a process sustained by strong electrostatic interactions between self-assembled surfactants (octanoate anions) and Pb2+ , is developed to realize orientational growth of single-crystalline CsPbBr3 microwires. Strong electrostatic interactions localized at the air-liquid interface not only support preferential nucleation for single crystallinity, but also select the crystal facet with the highest Pb2+ areal density for pure crystallographic orientation. Due to the epitaxy at the air-liquid interface, direct growth of oriented single-crystalline microwires onto different substrates without the processes of lift-off and transfer is realized. Photonic lasing emission, waveguide coupling, and on-chip propagation of coherent light are demonstrated based on these single-crystalline microwires. These findings open an avenue for on-chip integration of single-crystalline materials.

A Multifactorial Risk Score System for the Prediction of Diabetic Kidney Disease in Patients with Type 2 Diabetes Mellitus.

Purpose: In-depth investigations of risk factors for the identification of diabetic kidney disease (DKD) in type 2 diabetes mellitus (T2DM) are rare. We aimed to investigate the risk factors for developing DKD from multiple types of clinical data and conduct a comprehensive risk assessment for individuals with diabetes. Methods: We carried out a case-control study, enrolling 958 patients to identify the risk factors for developing DKD in T2DM patients from a database established from inpatient electronic medical records. Multivariable logistic regression was applied to develop a prediction model and the performance of the model was evaluated using the area under the curve (AUC) and calibration curve. A multifactorial risk score system was established according to the Framingham Study risk score. Results: DKD accounted for 34.03% of eligible patients in total. Twelve risk factors were selected in the final prediction model, including age, duration of diabetes, duration of hypertension, fasting blood glucose, fasting C-peptide, insulin use, systolic blood pressure, low-density lipoprotein, γ-glutamyl transpeptidase, platelet, uric acid, and thyroid stimulating hormone; and one protective factor, serum albumin. The prediction model showed an AUC of 0.862 (95% Confidence Interval (CI) 0.834-0.890) with an accuracy of 81.5% in the derivation dataset and an AUC of 0.876 (95% CI 0.825-0.928) in the validation dataset. The calibration curves were excellent and the estimated probability of DKD was more than 80% when the cumulative score for risk factors reached 17 points. Conclusion: Newly recognized risk factors were applied to assess the development of DKD in T2DM patients and the established risk score system was a reliable and feasible tool for assisting clinicians to identify patients at high risk of DKD.

Physical Activity, Obesity, and Hypertension among Adults in a Rapidly Urbanised City.

BACKGROUND: Few studies have explored the relationship between the level of physical activity and the occurrence or prevalence of obesity and hypertension among people residing in urbanised areas. METHOD: A cross-sectional study involving a sample of 1,001 adults was conducted. Descriptive statistics were used to describe sociodemographic variables, physical activity levels, body mass index (BMI), and prevalence of hypertension. Logistic regression models were adopted to investigate the relationship between these factors. RESULTS: A total of 939 respondents who provided valid responses were included. Among them, 56.5% of the participants reported engaging in high levels of physical activity. However, 40.4% of the respondents were classified as overweight or obese, and 31.9% had diagnosed hypertension. After adjusting for sociodemographic factors, logistic regression analysis revealed that physical activity levels were negatively correlated with the prevalence of BMI (OR = 0.564, 95% CI: 0.352-0.905; OR = 0.583, 95% CI: 0.375-0.907) and hypertension (OR = 0.556, 95% CI: 0.348-0.888). CONCLUSIONS: Our study confirms recent evidence regarding the amount of physical activity that is associated with lower prevalence of obesity and hypertension in Pingshan District. Furthermore, different physical activities of various intensity levels had different effects on hypertension. Residents should be encouraged to engage in physical activities and maintain a healthy weight to improve their quality of life.

Automatic Registration of the Mass Spectrometry Imaging Data of Sagittal Brain Slices to the Reference Atlas.

The registration of the mass spectrometry imaging (MSI) data with mouse brain tissue slices from the atlases could perform automatic anatomical interpretation, and the comparison of MSI data in particular brain regions from different mice could be accelerated. However, the current registration of MSI data with mouse brain tissue slices is mainly focused on the coronal. Although the sagittal plane is able to provide more information about brain regions on a single histological slice than the coronal, it is difficult to directly register the complete sagittal brain slices of a mouse as a result of the more significant individualized differences and more positional shifts of brain regions. Herein, by adding the auxiliary line on the two brain regions of central canal (CC) and cerebral peduncle (CP), the registration accuracy of the MSI data with sagittal brain slices has been improved (∼2-5-folds for different brain regions). Moreover, the histological sections with different degrees deformation and different dyeing effects have been used to verify that this pipeline has a certain universality. Our method facilitates the rapid comparison of sagittal plane MSI data from different animals and accelerates the application in the discovery of disease markers.

Acute toxicity and health effect of perfluoroisobutyronitrile on mice: a promising substitute gas-insulating medium to SF6.

Perfluoroisobutyronitrile (C4F7N) is a new eco-friendly gas insulation medium that has potential to replace the most greenhouse gas sulfur hexafluoride (SF6) used in power industry. In order to ensure the engineering application safety, an in-depth assessment of the acute inhalation toxicity of C4F7N gas mixture is required. This article revealed gender differences in male and female mice after exposure to C4F7N and the physiological recovery characteristics of surviving mice by means of 4 h acute inhalation toxicity tests, hematological determinations and histopathological examination. Comparative analysis on the toxicity of C4F7N on mice and rats is also evaluated. We find that the LC50 of C4F7N for male and female mice is 1175 ppm (4 h), 1380 ppm (4 h) and female ones are more tolerant to C4F7N. Mice that exposed to 1000 ppm C4F7N for 4 h could survive and return to their normal state after the 14-day observation period without irreversible damage. The toxic effect duration of C4F7N on rats is longer than that of mice. Relevant results revealed the acute inhalation toxicity of C4F7N systematically and provided fundamental reference for inhalation safety protection and engineering application.

First-Principles Insight into Pd-Doped ZnO Monolayers as a Promising Scavenger for Dissolved Gas Analysis in Transformer Oil.

ZnO monolayers with desirable n-type semiconducting properties are full of potential for sensing applications. In this work, we investigate using first-principles theory the adsorption and sensing behaviors of Pd-doped ZnO (Pd-ZnO) monolayers with two typical dissolved gases, namely, H2 and C2H2, to explore their sensing use for dissolved gas analysis in transformer oil. For Pd doping on the pristine ZnO monolayer, the TO site is identified as the most stable configuration with an E b of -1.44 eV. For the adsorption of H2 and C2H2, chemisorption is determined given the large adsorption energy (E ad) and formation of new bonds. Analyses of the charge density difference and density of state provide evidence of the strong binding force of Pd-H and Pd-C bonds, while band structure analysis provides the sensing mechanism of the Pd-ZnO monolayer as a resistance-type sensor for H2 and C2H2 detection with high electrical responses. Also, analysis of the work function (WF) provides the possibility of selective detection of H2 and C2H2 using a Pd-ZnO monolayer-based field-effect transistor sensor given the opposite changing trend of the WF after their adsorption. Our work may broaden the application of ZnO-based gas sensors for application in the field of electrical engineering.

[Regional differences analysis of Alismatis Rhizoma based on UPLC characteristic chromatogram and determination of eight terpenoids].

An ultra-performance liquid chromatography(UPLC) method integrating characteristic chromatogram and eight terpenoids determination has been established for comparing the differences of Alismatis Rhizoma(Zexie) from different product areas. Thirty-seven batches of crude drugs and thirty batches of prepared slices of Alismatis Rhizoma were analyzed. The obtained data were analyzed by similarity evaluation, principal components analysis(PCA) and partial least squares discriminant analysis(PLS-DA). There were three main characteristic peaks in the characteristic chromatograms, and alisol B 23-acetate(S) was selected as the reference. Compared with the S peak, the relative retention times of the other two characteristic peaks were 0.55(alisol) and 0.77(alisol B), respectively. Peak areas and the ratio of alisol B to alisol B 23-acetate could be used to distinguish Alismatis Rhizoma from different geographical origins. The samples were divided into three groups by PCA and PLS-DA based on the content determination results, and they were "Jian Zexie"(Fujian and Jiangxi provinces), "Chuan Zexie"(Sichuan and Hubei provinces), and "Guang Zexie"(Guangxi province). The contents of chemical components in samples from different producing areas were notably different. For example, the contents of alisol A and alisol A 24-acetate were significantly higher in "Guang Zexie" compared with "Jian Zexie" and "Chuan Zexie"(P<0.000 1). The contents of alisol B and alisol C were significantly higher in "Chuan Zexie" compared with "Jian Zexie"(P<0.000 1). Combining the characteristic chromatograms and quantitative analysis of eight terpenoids, this study showed that the relative contents of components and their ratios were notable different in samples from different regions, but types and numbers of chemical compositions were basically similar. The results of this study illustrated the regional differences of Alismatis Rhizoma and their components characteristics, and provided references for authentication and quality control of Alismatis Rhizoma.

[Qualitative and quantitative research on nucleosides of Alismatis Rhizoma from different regions].

Ten compounds, including nucleosides and amino acids were identified by UPLC-Q-TOF-MS. HPLC fingerprints on these compounds in Alismatis Rhizoma were established for the first time. The comparisons of Alismatis Rhizoma from different regions were conducted by the similarity evaluation and hierarchical cluster analysis(HCA). Meanwhile, the HPLC-DAD method for the content determination of five nucleosides was also established. The results showed that the similarities of Alismatis Rhizoma collected from Sichuan and Fujian provinces were above 0.96, whereas they were less than 0.87 in those from Guangxi province. The results of HCA showed the samples from Sichuan and Fujian were gathered in the same group, all samples from Guangxi in another group, which indicated the similarities between samples from Sichuan and Fujian in nucleosides and they were different from the samples from Guangxi. The total contents of five nucleosides were revealed, of which samples from Sichuan and Fujian were 0.81-1.30 mg·g~(-1) followed a descending order of vernine>cytidine>uridine>adenine>adenosine, and from Guangxi were 0.35-0.50 mg·g~(-1) with the sequences of uridine>adenine>vernine>cytidine>adenosine. The nucleosides contents of samples from Sichuan and Fujian were both higher than that from Guangxi. For samples from Sichuan and Fujian, the former was slightly higher, except for adenine. These results would be helpful to reveal the bioactive constituents in aqueous extract and provided important evidences for the quality control of Alismatis Rhizoma.

[Recommendations on quality standards of Alismatis Rhizoma in Chinese Pharmacopoeia(2020 edition)].

The present research was launched to improve the quality standards of Alismatis Rhizoma and supply scientific evidence and recommendations for the quality control of Alismatis Rhizoma in Chinese Pharmacopoeia(Ch. P) 2020 edition. The contents of water, total ash, heavy metals and deleterious element, pesticide residues and alcohol-soluble extract were analyzed according to the methods listed in the volume Ⅳ of Ch. P 2015 edition. Alisol B 23-acetate, alisol C 23-acetate and reference herbs were used to identify Alismatis Rhizoma by TLC method, which was developed by using a mixture of dichloromethane-methanol(15∶1) as developing solvent on silica gel GF_(254 )precoated plates. In HPLC method, alisol B 23-acetate and alisol C 23-acetate were separated with acetonitrile-water as the mobile phase and detected at 208 nm and 246 nm, respectively. Thirty-seven batches of crude drugs, thirty batches of prepared slices and nineteen batches of salt prepared slices of Alismatis Rhizoma were determined according to the methods established. The quality standards established based on the research results were specific and repeatable, and suitable for the quality evaluation of Alismatis Rhizoma. We recommended that the botanical sources, TLC examination, alcohol-soluble extract of salt prepared slices and content determination should be revised in the Ch. P 2020 edition.

[Advances in studies on chemical compositions of Alismatis Rhizoma and their biological activities].

Alismatis Rhizoma is a traditional Chinese medicine, which was widely used in clinical prescriptions and proprietary Chinese medicine. Over 220 compounds have been isolated from it, including triterpenoids, sesquiterpenoids, diterpenoids, polysaccharides, nitrogen compounds, phenylpropanoids, flavones and sterides. The pharmacological studies show that Alismatis Rhizoma exhibits diuretic, anti-urolithiatic, anti-hyperlipidemia, antidiabetics, antitumor, antioxidative, anti-inflammatory, anti-complementary activities, etc. In this review, the chemical compositions and its pharmacological activities of Alismatis Rhizoma in recent 50 years were summarized. The authors hope to provide references for further study, development and utilization of Alismatis Rhizoma.