Cultivation of Pichia pastoris carrying the scFv anti LDL (-) antibody fragment. Effect of preculture carbon source

Antibodies and antibody fragments are nowadays among the most important biotechnological products, and Pichia pastoris is one of the most important vectors to produce them as well as other recombinant proteins. The conditions to effectively cultivate a P. pastoris strain previously genetically modified to produce the single-chain variable fragment anti low density lipoprotein (-) under the control of the alcohol oxidase promoter have been investigated in this study. In particular, it was evaluated if, and eventually how, the carbon source (glucose or glycerol) used in the preculture preceding cryopreservation in 20% glycerol influences both cell and antibody fragment productions either in flasks or in bioreactor. Although in flasks the volumetric productivity of the antibody fragment secreted by cells precultured, cryopreserved and reactivated in glycerol was 42.9% higher compared with cells precultured in glucose, the use of glycerol in bioreactor led to a remarkable shortening of the lag phase, thereby increasing it by no less than thrice compared to flasks. These results are quite promising in comparison with those reported in the literature for possible future industrial applications of this cultivation, taking into account that the overall process time was reduced by around 8h.(AU)

Screening of wild type Streptomyces isolates able to overproduce clavulanic acid

The selection of new microorganisms able to produce antimicrobial compounds is hoped for to reduce their production costs and the side effects caused by synthetic drugs. Clavulanic acid is a β-lactam antibiotic produced by submerged culture, which is widely used in medicine as a powerful inhibitor of β-lactamases, enzymes produced by bacteria resistant to antibiotics such penicillin and cephalosporin. The purpose of this work was to select the best clavulanic acid producer among strains of Streptomyces belonging to the Microorganism Collection of the Department of Antibiotics of the Federal University of Pernambuco (DAUFPE). Initially, the strains were studied for their capacity to inhibit the action of β-lactamases produced by Klebsiella aerogenes ATCC 15380. From these results, five strains were selected to investigate the batch kinetics of growth and clavulanic acid production in submerged culture carried out in flasks. The results were compared with the ones obtained by Streptomyces clavuligerus ATCC 27064 selected as a control strain. The best clavulanic acid producer was Streptomyces DAUFPE 3060, molecularly identified as Streptomyces variabilis, which increased the clavulanic acid production by 28% compared to the control strain. This work contributes to the enlargement of knowledge on new Streptomyces wild strains able to produce clavulanic acid by submerged culture.

Antifungal activity of topical microemulsion containing a thiophene derivative

Fungal infections have become a major problem of worldwide concern. Yeasts belonging to the Candida genus and the pathogenic fungus Cryptococcus neoformans are responsible for different clinical manifestations, especially in immunocompromised patients. Antifungal therapies are currently based on a few chemotherapeutic agents that have problems related to effectiveness and resistance profiles. Microemulsions are isotropic, thermodynamically stable transparent systems of oil, water and surfactant that can improve the solubilization of lipophilic drugs. Taking into account the need for more effective and less toxic drugs along with the potential of thiophene derivatives as inhibitors of pathogenic fungi growth, this study aimed to evaluate the antifungal activity of a thiophene derivative (5CN05) embedded in a microemulsion (ME). The minimum inhibitory concentration (MIC) was determined using the microdilution method using amphotericin B as a control. The formulations tested (ME- blank and ME-5CN05) showed physico-chemical properties that would allow their use by the topical route. 5CN05 as such exhibited moderate or weak antifungal activity against Candida species (MIC = 270-540 µg.mL-1) and good activity against C. neoformans (MIC = 17 µg.mL-1). Candida species were susceptible to ME-5CN05 (70-140 µg.mL-1), but C. neoformans was much more, presenting a MIC value of 2.2 µg.mL-1. The results of this work proved promising for the pharmaceutical industry, because they suggest an alternative therapy against C. neoformans.

Influence of fructooligosaccharides on the fermentation profile and viable counts in a symbiotic low fat milk

This study evaluated the effects of prebiotics on fermentation profile and growth of Lactobacillus acidophilus, Lactobacillus bulgaricus, Lactobacillus rhamnosus, and Bifidobacterium lactis in co-cultures with Streptococcus thermophilus. Acidification rate and viability were positively influenced by the co-culture with B. lactis and by both inulin or oligofructose in low fat milk.

Influence of fructooligosaccharides on the fermentation profile and viable counts in a symbiotic low fat milk

This study evaluated the effects of prebiotics on fermentation profile and growth of Lactobacillus acidophilus, Lactobacillus bulgaricus, Lactobacillus rhamnosus, and Bifidobacterium lactis in co-cultures with Streptococcus thermophilus. Acidification rate and viability were positively influenced by the co-culture with B. lactis and by both inulin or oligofructose in low fat milk.(AU)

Statistical investigation of Kluyveromyces lactis cells permeabilization with ethanol by response surface methodology

The aim of our study was to select the optimal operating conditions to permeabilize Kluyveromyces lactis cells using ethanol as a solvent as an alternative to cell disruption and extraction. Cell permeabilization was carried out by a non-mechanical method consisting of chemical treatment with ethanol, and the results were expressed as -galactosidase activity. Experiments were conducted under different conditions of ethanol concentration, treatment time and temperature according to a central composite rotatable design (CCRD), and the collected results were then worked out by response surface methodology (RSM). Cell permeabilization was improved by an increase in ethanol concentration and simultaneous decreases in the incubation temperature and treatment time. Such an approach allowed us to identify an optimal range of the independent variables within which the -galactosidase activity was optimized. A maximum permeabilization of 2,816 mmol L-1 oNP min-1 g-1 was obtained by treating cells with 75.0% v/v of ethanol at 20.0 °C for 15.0 min. The proposed methodology resulted to be effective and suited for K. lactis cells permeabilization at a lab-scale and promises to be of possible interest for future applications mainly in the food industry.

Kinetic analysis of batch ethanol acetylation in isothermal non-stationary multiphase systems by lyophilized mycelium of Aspergillus oryzae

A relatively complex network of reactions has been investigated, using as a network model the isothermal batch esterification of acetic acid with ethanol in n-heptane catalyzed by lyophilized mycelium of Aspergillus oryzae. The kinetic analysis was firstly carried out on the whole system, without any simplification, by means of the well-known integral method. Owing to the poor results obtained by this way, we developed an alternative approach, combining initial rates and integral analysis and reducing the number of empirical parameters to be determined by the use of equilibrium data. All the values of the parameters calculated according to this "composite" approach to kinetic analysis well correlate with experimental data.

Citric acid production from orange peel wastes by solid-state fermentation

Valencia orange (Citrus sinensis) peel was employed in this work as raw material for the production of citric acid (CA) by solid-state fermentation (SSF) of Aspergillus niger CECT-2090 (ATCC 9142, NRRL 599) in Erlenmeyer flasks. To investigate the effects of the main operating variables, the inoculum concentration was varied in the range 0.5·10³ to 0.7·10(8) spores/g dry orange peel, the bed loading from 1.0 to 4.8 g of dry orange peel (corresponding to 35-80 % of the total volume), and the moisture content between 50 and 100 % of the maximum water retention capacity (MWRC) of the material. Moreover, additional experiments were done adding methanol or water in different proportions and ways. The optimal conditions for CA production revealed to be an inoculum of 0.5·10(6) spores/g dry orange peel, a bed loading of 1.0 g of dry orange peel, and a humidification pattern of 70 % MWRC at the beginning of the incubation with posterior addition of 0.12 mL H2O/g dry orange peel (corresponding to 3.3 % of the MWRC) every 12 h starting from 62 h. The addition of methanol was detrimental for the CA production. Under these conditions, the SSF ensured an effective specific production of CA (193 mg CA/g dry orange peel), corresponding to yields of product on total initial and consumed sugars (glucose, fructose and sucrose) of 376 and 383 mg CA/g, respectively. These results, which demonstrate the viability of the CA production by SSF from orange peel without addition of other nutrients, could be of interest to possible, future industrial applications.

Optimization of clavulanic acid production by Streptomyces daufpe 3060 by response surface methodology

Clavulanic acid is a -lactam antibiotic which has a potent -lactamase inhibiting activity. In order to optimize its production by the new isolate Streptomyces DAUFPE 3060, the influence of two independent variables, temperature and soybean flour concentration, on clavulanic acid and biomass concentrations was investigated in 250 mL-Erlenmeyers according to a 2² central composite design. To this purpose, temperature and soybean flour (SF) concentration were varied in the ranges 26-34°C and 10-50 g/L, respectively, and the results evaluated utilizing the Response Surface Methodology. The experimental maximum production of clavulanic acid (629 mg/L) was obtained at 32°C and 40 g/L SF after 48 h, while the maximum biomass concentration (3.9 g/L) at 30°C and 50 g/L soybean flour, respectively. These values are satisfactorily close to those (640 mg/L and 3.75 g/L, respectively) predicted by the model, thereby demonstrating the validity of the mathematical approach adopted in this study.

Biotechnological production of citric acid

This work provides a review about the biotechnological production of citric acid starting from the physicochemical properties and industrial applications, mainly in the food and pharmaceutical sectors. Several factors affecting citric acid fermentation are discussed, including carbon source, nitrogen and phosphate limitations, pH of culture medium, aeration, trace elements and morphology of the fungus. Special attention is paid to the fundamentals of biochemistry and accumulation of citric acid. Technologies employed at industrial scale such as surface or submerged cultures, mainly employing Aspergillus niger, and processes carried out with Yarrowia lipolytica, as well as the technology for recovering the product are also described. Finally, this review summarizes the use of orange peels and other by-products as feedstocks for the bioproduction of citric acid.

Vanillin production by recombinant strains of Escherichia coli

Vanillin production from ferulate was studied using different recombinant strains of Escherichia coli. To prevent the occurrence of aerobic conditions and then possible product oxidation, tests were performed in Erlenmeyer flasks under mild mixing (150 rpm). Among other transformants, E. coli JM109(pBB1) appeared to be the best vanillin producer, being able to convert no less than 95% of starting ferulate to the product within 1h. This yield decreased down to 72% after 72h, likely because of a non-specific oxidase activity responsible for vanillin oxidation to vanillate.

A produção de vanilina a partir de ácido ferúlico foi estudada utilizando-se diferentes linhagens recombinantes de Escherichia coli. Para prevenir a ocorrência de condições de aerobiose e a possível oxidação do produto, os ensaios foram realizados em frascos Erlenmeyer sob agitação moderada (150 rpm). E. coli JM109 (pBBI) mostrou-se o melhor produtor de vanilina entre os demais agentes transformantes, sendo capaz de converter 95% do ácido ferúlico inicial em produto após 1h, rendimento este que decresceu para 72% após 72h, provavelmente devido à atividade de uma oxidase não-específica responsável pela oxidação de vanilina a ácido vanílico.

Vanillin production by recombinant strains of Escherichia coli

Vanillin production from ferulate was studied using different recombinant strains of Escherichia coli. To prevent the occurrence of aerobic conditions and then possible product oxidation, tests were performed in Erlenmeyer flasks under mild mixing (150 rpm). Among other transformants, E. coli JM109(pBB1) appeared to be the best vanillin producer, being able to convert no less than 95% of starting ferulate to the product within 1h. This yield decreased down to 72% after 72h, likely because of a non-specific oxidase activity responsible for vanillin oxidation to vanillate.

A produção de vanilina a partir de ácido ferúlico foi estudada utilizando-se diferentes linhagens recombinantes de Escherichia coli. Para prevenir a ocorrência de condições de aerobiose e a possível oxidação do produto, os ensaios foram realizados em frascos Erlenmeyer sob agitação moderada (150 rpm). E. coli JM109 (pBBI) mostrou-se o melhor produtor de vanilina entre os demais agentes transformantes, sendo capaz de converter 95% do ácido ferúlico inicial em produto após 1h, rendimento este que decresceu para 72% após 72h, provavelmente devido à atividade de uma oxidase não-específica responsável pela oxidação de vanilina a ácido vanílico.

Vanillin production by recombinant strains of Escherichia coli

Vanillin production from ferulate was studied using different recombinant strains of Escherichia coli. To prevent the occurrence of aerobic conditions and then possible product oxidation, tests were performed in Erlenmeyer flasks under mild mixing (150 rpm). Among other transformants, E. coli JM109(pBB1) appeared to be the best vanillin producer, being able to convert no less than 95% of starting ferulate to the product within 1h. This yield decreased down to 72% after 72h, likely because of a non-specific oxidase activity responsible for vanillin oxidation to vanillate.

A produção de vanilina a partir de ácido ferúlico foi estudada utilizando-se diferentes linhagens recombinantes de Escherichia coli. Para prevenir a ocorrência de condições de aerobiose e a possível oxidação do produto, os ensaios foram realizados em frascos Erlenmeyer sob agitação moderada (150 rpm). E. coli JM109 (pBBI) mostrou-se o melhor produtor de vanilina entre os demais agentes transformantes, sendo capaz de converter 95% do ácido ferúlico inicial em produto após 1h, rendimento este que decresceu para 72% após 72h, provavelmente devido à atividade de uma oxidase não-específica responsável pela oxidação de vanilina a ácido vanílico.