Optimization of lipid profile and hardness of low-fat mortadella following a sequential strategy of experimental design.

This study aims to optimize simultaneously the lipid profile and instrumental hardness of low-fat mortadella. For lipid mixture optimization, the overlapping of surface boundaries was used to select the quantities of canola, olive, and fish oils, in order to maximize PUFAs, specifically the long-chain n-3 fatty acids (eicosapentaenoic-EPA, docosahexaenoic acids-DHA) using the minimum content of fish oil. Increased quantities of canola oil were associated with higher PUFA/SFA ratios. The presence of fish oil, even in small amounts, was effective in improving the nutritional quality of the mixture, showing lower n-6/n-3 ratios and significant levels of EPA and DHA. Thus, the optimal lipid mixture comprised of 20, 30 and 50% fish, olive and canola oils, respectively, which present PUFA/SFA (2.28) and n-6/n-3 (2.30) ratios within the recommendations of a healthy diet. Once the lipid mixture was optimized, components of the pre-emulsion used as fat replacer in the mortadella, such as lipid mixture (LM), sodium alginate (SA), and milk protein concentrate (PC), were studied to optimize hardness and springiness to target ranges of 13-16 N and 0.86-0.87, respectively. Results showed that springiness was not significantly affected by these variables. However, as the concentration of the three components increased, hardness decreased. Through the desirability function, the optimal proportions were 30% LM, 0.5% SA, and 0.5% PC. This study showed that the pre-emulsion decreases hardness of mortadella. In addition, response surface methodology was efficient to model lipid mixture and hardness, resulting in a product with improved texture and lipid quality.

Amazon Fruits as Healthy Ingredients in Muscle Food Products: A Review.

When looking for new ingredients to process red meat, poultry, and fish products, it is essential to consider using vegetable resources that can replace traditional ingredients such as animal fat and synthetic antioxidants that may harm health. The Amazon, home to hundreds of edible fruit species, can be a viable alternative for new ingredients in processing muscle food products. These fruits have gained interest for their use as natural antioxidants, fat replacers, colorants, and extenders. Some of the fruits that have been tested include açai, guarana, annatto, cocoa bean shell, sacha inchi oil, and peach palm. Studies have shown that these fruits can be used as dehydrated products or as liquid or powder extracts in doses between 250 and 500 mg/kg as antioxidants. Fat replacers can be added directly as flour or used to prepare emulsion gels, reducing up to 50% of animal fat without any detrimental effects. However, oxidation problems of the gels suggest that further investigation is needed by incorporating adequate antioxidant levels. In low doses, Amazon fruit byproducts such as colorants and extenders have been shown to have positive technological and sensory effects on muscle food products. While evidence suggests that these fruits have beneficial health effects, their in vitro and in vivo nutritional effects should be evaluated in muscle food products containing these fruits. This evaluation needs to be intended to identify safe doses, delay the formation of key oxidation compounds that directly affect health, and investigate other factors related to health.

Fish Burgers Fortified with Microencapsulated Sacha Inchi Oil: Effects on Technological and Sensory Properties.

The long-chain omega-3 fatty acids alpha linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) have proven health benefits, but it is not common to find them together in a processed food product. This could lead to healthier and more functional food products, which may have positive implications for consumer health and well-being. This work aimed to fortify a model burger manufactured with fillets of an Amazonian fish (boquichico, Prochilodus nigricans) by adding microencapsulated sacha inchi oil (Plukenetia volubilis, rich in ALA) (MSIO) produced by spray-drying. MSIO was incorporated into the burgers at different levels (0, 3, 4, 5, and 6%). The burgers were characterized by their proximal composition, cooking losses, texture profile, lipid oxidation, sensory profile, overall liking, and fatty acid profile. The results showed that adding MSIO up to concentrations of 5% or 6% increased the instrumental hardness, chewiness, and lipid oxidation in the burgers. However, fortifying the burgers with 3% MSIO was possible without affecting the burgers' sensory properties and overall liking. Regarding the fatty acid profile, the burgers with 3% MSIO had a higher content of polyunsaturated fatty acids, with the ALA, EPA, and DHA types of fatty acids. Therefore, we recommend using this fortification concentration, but future studies should be carried out to improve the oxidative stability of MSIO and the burgers.

A Comparative Study of Freshwater Fish Burgers Made from Three Amazonian Species: Omega 3 Fortification and Sodium Reduction.

This study aimed to formulate burgers made from three Amazonian fish species: pacu (Pyaractus brachypomus), boquichico (Prochilodus nigricans), and bujurqui (Chaetobranchus flavescens), focusing on sodium reduction and fortification with fish oil microparticles (FOM) rich in eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). The proximal composition, sodium and calcium content, instrumental texture profile, fatty acid profile, sensory profile, and overall liking were evaluated. Differences in proximal composition and fatty acid profiles between the fillets were reflected in the burgers. Fortification with FOM increased EPA and DHA in the burgers; thus, they can be considered "high in omega-3 fatty acids" and reduced the n-6/n-3 ratio below 4. There were sensory attributes that could be related to lipid oxidation but reduced overall liking for less than 10% of consumers. Nevertheless, certain sensory attributes (grilled, characteristic, aromatic, tasty, tender, and juicy) had a positive impact on the overall liking of more than 20% of consumers, yielding adequate scores (between 5.60 and 5.71) on the 9-point hedonic scale. The production process must be optimized by knowing the fish fillet quality in depth, improving the FOM and burgers' oxidative stability, and achieving an adequate sensory and hedonic profile by employing consumers' vocabulary to characterize new products.

Exploring Pijuayo (Bactris gasipaes) Pulp and Peel Flours as Fat Replacers in Burgers: A Multivariate Study on Physicochemical and Sensory Traits.

Meat products are known for their lipid profile rich in saturated fats and cholesterol, and also for the formation of oxidation compounds; therefore, a reduction in animal fat may result in a product less harmful to health. Pijuayo is an Amazon fruit known for its nutritional properties, such as its fiber and lipid content. For these reasons, it is an attractive fruit to replace animal fat in meat products. The present work used pijuayo pulp and peel flours to partially replace animal fat in beef-based burgers at 25% and 50% levels, considering sensory and physicochemical outcomes evaluated by Principal Component Analysis (PCA), Correspondence Analysis (CA) and Multiple Factor Analysis (MFA). Pijuayo flour affected the physicochemical characteristics evaluated by PCA, where the samples with greater fat replacement were characterized by a high carbohydrate content and instrumental yellowness. The minimal fat replacement did not abruptly affect the PCA's instrumental texture and color, proximal composition, yield properties, and lipid oxidation. The overall liking was greater in the 25% fat reduction treatments, even greater than the control, in which positive sensory attributes for liking were highlighted for those treatments. A small segment of consumers (11% of total consumers) preferred the treatment with greater replacement of fat with pijuayo peel flour, which these consumers tended to characterize as seasoned. However, this treatment had the lowest liking. The MFA showed that the sensory characteristics tender and tasty were strongly correlated with overall liking and were highlighted in the samples of 25% fat reduction, suggesting that the pijuayo improves the tenderness and flavor of reduced-fat burgers. Other inclusion levels between 25% and 50% of fat replacement could be explored, and optimization studies are needed. In addition, the sensory characteristics and flavor-enhancing compounds of the fruit, as well as the nutritional aspects of the inclusion of pijuayo, should be studied, such as the fatty acid profile. These characteristics will be informative to explore pijuayo as a fat replacer at a pilot scale and industrial scale.

Impact of Micronized Salt in Reducing the Sodium Content in Fresh Sausages.

This study aimed to investigate the incorporation of micronized salt (MS) to reduce sodium content in fresh sausages while preserving technological, chemical, textural, and sensory characteristics. Four treatments were prepared: control (C) with 2.0% regular salt; M2.0% with 2.0% micronized salt; M1.5% with 1.5% micronized salt; and M1.0% with 1.0% micronized salt, containing 1004, 1133, 860, and 525 mg of sodium/100 g of product, respectively. To characterize the samples, analyses of sodium content, cooking loss, relative myoglobin content, and instrumental color were carried out. The sensory analysis was performed using the Temporal-Check-All-That-Apply (TCATA) method. Half of the micronized salt treatment was mixed with the fat during the processing of the fresh sausages. It was possible to achieve a 50% reduction in sodium (M1.0%) in the fresh sausages without negative effects on most technological, chemical, and textural parameters, which did not differ from the control treatment (C). Conversely, "chewiness" decreased in M2.0% compared to the control (C) due to mixing micronized salt with the fat. The sodium reduction did not impact the temporal sensory profile and overall liking. Therefore, using micronized salt in fresh sausages reduces sodium content without affecting sensory traits and product stability.

High-power ultrasound, micronized salt, and low KCl level: An effective strategy to reduce the NaCl content of Bologna-type sausages by 50.

This study evaluated the combination of high-power ultrasound (HPU), micronized salt (MS), and low KCl levels as a strategy to produce reduced sodium Bologna-type sausages. Samples with 50% NaCl reduction were produced with regular salt (RS) or MS and 0.5% KCl. The sausages were sonicated for 0 or 27 min in an ultrasonic bath (25 kHz, 60% amplitude, normal mode, 20 °C) immediately after filling. The sodium reformulation strategy was effective in compensating for the defects in the emulsion stability and texture profile caused by the NaCl reduction. Besides, the combination of HPU, MS, and KCl did not cause major impacts on the evolution of pH, Eh, and TBARS values of the sausages during storage (21 days at 4 °C). The use of MS and KCl also allowed a reduction by 50% of the NaCl content (< 42% Na; Na/K ratio: 1.2 to 1.3) of the samples without affecting the salty taste, which was enhanced by the HPU treatment.

Modification of NaCl structure as a sodium reduction strategy in meat products: An overview.

Sodium chloride (NaCl) is an indispensable ingredient in meat products, but the consumption of high doses of sodium contained in their formulations may bring about negative health implications. The replacement of NaCl by other salts in meat products has been a technological challenge. Accordingly, this review highlights the importance of NaCl over other sodium and non­sodium salts in the saltiness perception and proposes the use of reduced-size and shapes of NaCl to maximize saltiness perception, while using less NaCl dosages in meat products. However, the effect of matrix components (water, proteins and fats) on the final salty taste is of special consideration. To counteract the effect of the matrix components, two main routes of incorporation of different NaCl types in meat products are discussed: encapsulation and protection of NaCl by the hydrophobic component of the meat product. Given the limited number of publications using this potential strategy, more studies on the application of these technological strategies are required.

Enrichment of NaCl-reduced burger with long-chain polyunsaturated fatty acids: Effects on physicochemical, technological, nutritional, and sensory characteristics.

This study aimed to determine the effect of NaCl reduction and addition of long-chain polyunsaturated fatty acids (PUFA) on the quality traits of burgers. Fish oil was either directly incorporated or added as encapsulated by freeze-dried microparticles (complex coacervates) composed of soy protein isolate and inulin. Despite the differences in some parameters associated with NaCl reduction (e.g., instrumental hardness), the quality of the burgers was mainly affected by the microparticles. Thus, a decrease in pH and increase in hardness and chewiness were observed, and a higher exposure of fish oil to oxidation was observed thus increasing volatile oxidation compounds and negatively impacting on the sensory profile and overall liking of the burgers. However, the encapsulation of the fish oil helped to retain EPA and DHA after cooking. The results of the NaCl-reduced burger with unencapsulated fish oil suggest the possibility of incorporating PUFAs, but only containing EPA after cooking.

Agaricus bisporus mushroom as partial fat replacer improves the sensory quality maintaining the instrumental characteristics of beef burger.

The effect of Agaricus bisporus (AB) mushroom as a fat replacer in beef burgers was evaluated. Four treatments were compared: control (0% AB, 20% fat) and 3 treatments with partial fat replacement: AB 5% (5% AB, 15% fat); AB 10% (10% AB, 10% fat); AB 15% (AB 15%, 5% fat). Mushroom addition increased moisture content and yield and decreased cooking loss and diameter reduction of the burgers. Formulations with the highest AB concentrations were lighter and redder than the control. AB incorporation affected texture, resulting in less hard and less chewy products. In general, lipid oxidation increased during the storage time, however the lowest values were observed in AB 15%, i.e. the lowest fat content and the presence of AB increased the oxidative stability. AB 10% and AB 15% had good overall liking and were sensorially characterized as juicy, tender and flavorsome burgers. The partial replacement of animal fat by AB is a promising strategy for developing a low-fat burger.

Original burger (traditional) or burger with mushroom addition? A social representation approach to novel foods.

Currently, consumers' interest in healthy products has attracted the attention of academia and the meat industry, which has focused mainly on incorporating ingredients with healthier properties. In this context, the aim of this study was to investigate the social representation of original burgers and burgers with mushroom addition considering different sexes and body mass indexes (BMIs) of individuals. Thus, 209 Brazilians answered a word association task followed by a word classification based on their importance and valence for original burgers and burgers with the addition of mushrooms. To obtain the structure of social representation, the words were positioned into four distinct zones based on their frequency of elicitation and importance. Also, the polarity index was used to give a connotation to the words. Three groups of consumers were identified. The first group (consumers with class-1 obesity of both sexes) associated the original burger with positive categories (cheese, juicy, seasoned, food, tasty, joy, salad and delicious). The second one (female consumers with pre-obesity and class-1 obesity) associated the burger with the addition of mushrooms with the elements price, different, vegetarian, flavor, gourmet and healthy. Finally, the third group (men and women for both stimuli and with a wide range of BMI) characterized burgers with sensory attributes, feelings and moments of consumption. In conclusion, the social representation of the original burger and the burger with the addition of mushrooms differed among consumers, suggesting that the main associations can be the main motivations for the consumption of a certain product.

Impact of the content and size of NaCl on dynamic sensory profile and instrumental texture of beef burgers.

The objectives of this study were to determine the effect of reducing the content and size of NaCl on the instrumental texture and dynamic sensory profile, and to determine the temporal drivers of liking (TDL). The reduction of the NaCl content decreased the hardness and chewiness parameters, and affected the dynamic sensory profile of the product. The NaCl reduction (<1.0% NaCl) was related to a higher incidence of the attributes off-flavor and dry. In general, the overall liking was driven by the juicy and tasty attributes, the latter being associated with the presence of the sensory attributes salty and seasoned and the texture parameters hardness and chewiness. According to the results, among the treatments with NaCl reduction, the beef burger added with 1.0% micronized salt stood out, since it did not affect considerably the texture parameters, the dynamic sensory profile during chewing and the consumers' liking.

Descriptive and hedonic sensory perception of Brazilian consumers for smoked bacon.

The descriptive and hedonic sensory perception of bacon manufactured using different smoking processes was studied. Six bacon samples were evaluated: three manufactured with woods, two with liquid smokes, and a commercial bacon. Consumers rated their overall liking (OL) and responded the check-all-that-apply (CATA) questions coupled with ideal profile method (IPM).1 The preliminary result showed that LS2 and Bamboo were the best-rated bacons. However, data analysis indicated two segments of consumers (both n = 50), with significant differences in the OL. The first segment liked fatty and smoked bacons, while the second valued the texture and appearance. The drivers of liking in both segments were the attributes related to texture, juiciness and the smoky aroma. The use of different woods in the bacon smoking process modified the descriptive and hedonic sensory perception of consumers.

Reducing the sodium content without modifying the quality of beef burgers by adding micronized salt.

This study determined the effect of the incorporation of micronized salt on physicochemical, yield and consumer's sensory characteristics of beef burger. The micronized salt was obtained by sieving the commercial salt in a 60-mesh stainless steel sieve. The commercial (regular salt) and micronized salt presented differences in the mean size, size distribution and bulk density. Half of the amount of the micronized salt was mixed with pork back fat, and the other half was added to the meat batter in the beef burger manufacture. A Pivot profile method was used with consumers to describe the sensory properties of the burger samples (ranging from 0.5% to 1.5% NaCl). The Pivot profile data revealed that treatments with 0.75% and 0.5% micronized salt were mainly characterized as dry, besides showing the highest cooking loss and diameter reduction. However, beef burgers with 1.0% micronized salt and 1.5% regular salt had similar perceived salty taste. In terms of salt reduction, the results indicated that it would be possible to reduce salt from 1.5% to 1.0% when using micronized salt, without affecting the pH, color parameters, yield properties and some sensory characteristics of the burger, such as salty, tasty, juicy, fatty, and spicy. Therefore, this strategy promises great potential for industrial application in products that contain lipids in their composition, such as meat products.

Chitosan active films containing agro-industrial residue extracts for shelf life extension of chicken restructured product.

This study aimed to develop chitosan films incorporating natural antioxidants from peanut skin (EPS) and pink pepper residue (EPP) extracts, as well as to evaluate their effects on lipid oxidation, pH, color, and microbial counts of a restructured chicken product. EPS had higher phenolic content and antioxidant activity compared to EPP. When both extracts were applied to chicken meat and the chitosan films, there were no differences for color, pH and total mesophilic counts compared to control at the end of the storage period. For lipid oxidation (peroxide value and thiobarbituric acid reactive substances), both extracts proved to be as effective as butylated hydroxytoluene to maintain the oxidative stability of the chicken product. The microbial counts of psychrotrophic microorganisms were significantly lower for treatments with active films. Chitosan active films with residue extracts may maintain the quality of chicken products due to their antioxidant and antimicrobial potential.

Effect of ultimate pH and ageing on thermal denaturation of bovine muscle proteins.

The thermal denaturation of proteins was evaluated in the natural state of bovine muscle using differential scanning calorimetry (DSC). The Longissimus lumborum muscle was selected according to ultimate pH (pHu) values classified into two groups: low pHu with values between 5.4 and 5.8, and intermediate pHu with values between 5.81 and 6.19. The muscles were cut and aged at 2°C up to 21d post mortem. The three maximum temperatures of denaturation (Tmax1, Tmax2, Tmax3) found in muscle were evaluated, showing higher thermal stability in the intermediate pHu group, which could be an indicator of protection of proteins against aggregation or enzymatic activity. The thermal behavior of muscle proteins could be defined by biochemical factors that are affected by pHu of the muscle, however, further studies are necessary to explain this process, which could have a great impact on the understanding of the final tenderness achieved in meat.