In situ spectroelectrochemical probing of CO redox landscape on copper single-crystal surfaces.

Electrochemical reduction of CO(2) to value-added chemicals and fuels is a promising strategy to sustain pressing renewable energy demands and to address climate change issues. Direct observation of reaction intermediates during the CO(2) reduction reaction will contribute to mechanistic understandings and thus promote the design of catalysts with the desired activity, selectivity, and stability. Herein, we combined in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy and ab initio molecular dynamics calculations to investigate the CORR process on Cu single-crystal surfaces in various electrolytes. Competing redox pathways and coexistent intermediates of CO adsorption (*COatop and *CObridge), dimerization (protonated dimer *HOCCOH and its dehydrated *CCO), oxidation (*CO2- and *CO32-), and hydrogenation (*CHO), as well as Cu-Oad/Cu-OHad species at Cu-electrolyte interfaces, were simultaneously identified using in situ spectroscopy and further confirmed with isotope-labeling experiments. With AIMD simulations, we report accurate vibrational frequency assignments of these intermediates based on the calculated vibrational density of states and reveal the corresponding species in the electrochemical CO redox landscape on Cu surfaces. Our findings provide direct insights into key intermediates during the CO(2)RR and offer a full-spectroscopic tool (40-4,000 cm-1) for future mechanistic studies.

Unveiling the Morphology of Carbon-Supported Ru Nanoparticles by Multiscale Modeling.

Simulating the behavior of metal nanoparticles on supports is crucial for boosting their catalytic performance and various nanotechnology applications; however, such simulations are limited by the conflicts between accuracy and efficiency. Herein, we introduce a multiscale modeling strategy to unveil the morphology of Ru supported on pristine and N-doped graphene. Our multiscale modeling started with the electronic structures of a supported Ru single atom, revealing the strong metal-support interaction around pyridinic nitrogen sites. To determine the stable configurations of Ru2-13 clusters on three different graphene supports, global energy minimum searches were performed. The sintering of the global minimum Ru13 clusters on supports was further simulated by ab initio molecular dynamics (AIMD). The AIMD data set was then collected for deep potential molecular dynamics to study the melting of Ru nanoparticles. This study presents comprehensive descriptions of carbon-supported Ru and develops modeling approaches that bridge different scales and can be applied to various supported nanoparticle systems.

Mechanisms of CH4 activation over oxygen-preadsorbed transition metals by ReaxFF and AIMD simulations.

The chemisorbed oxygen usually promotes the CH bond activation over less active metals like IB group metals but has no effect or even an inhibition effect over more active metals like Pd based on the static electronic structure study. However, the understanding in terms of dynamics knowledge is far from complete. In the present work, methane dissociation on the oxygen-preadsorbed transition metals including Au, Cu, Ni, Pt, and Pd is systemically studied by reactive force field (ReaxFF). The ReaxFF simulation results indicate that CH4 molecules mainly undergo the direct dissociation on Ni, Pt, and Pd surfaces, while undergo the oxygen-assisted dissociation on Au and Cu surfaces. Additionally, the ab initio molecular dynamics (AIMD) simulations with the umbrella sampling are employed to study the free-energy changes of CH4 dissociation, and the results further support the CH4 dissociation pathway during the ReaxFF simulations. The present results based on ReaxFF and AIMD will provide a deeper dynamic understanding of the effects of pre-adsorbed oxygen species on the CH bond activation compared to that of static DFT.

Perfluorinated Amines: Accelerating Lithium Electrodeposition by Tailoring Interfacial Structure and Modulated Solvation for High-Performance Batteries.

Modulating interfacial electrochemistry represents a prevalent approach for mitigating lithium dendrite growth and enhancing battery performance. Nevertheless, while most additives exhibit inhibitory characteristics, the accelerating effects on interfacial electrochemistry have garnered limited attention. In this work, perfluoromorpholine (PFM) with facilitated kinetics is utilized to preferentially adsorb on the lithium metal interface. The PFM molecules disrupt the solvation structure of Li+ and enhance the migration of Li+. Combined with the benzotrifluoride, a synergistic acceleration-inhibition system is formed. The ab initio molecular dynamics (AIMD) and density functional theory (DFT) calculation of the loose outer solvation clusters and the key adsorption-deposition step supports the fast diffusion and stable interface electrochemistry with an accelerated filling mode with C─F and C─H groups. The approach induces the uniform lithium deposition. Excellent cycling performance is achieved in Li||Li symmetric cells, and even after 200 cycles in Li||NCM811 full cells, 80% of the capacity is retained. This work elucidates the accelerated electrochemical processes at the interface and expands the design strategies of acceleration fluorinated additives for lithium metal batteries.

Enhanced Uranium Extraction via Charge Dynamics and Interfacial Polarization in MoS2/GO Heterojunction Electrodes.

The removal of uranyl ions (UO2 2+) from water is challenging due to their chemical stability, low concentrations, complex water matrix, and technical limitations in extraction and separation. Herein, a novel molybdenum disulfide/graphene oxide heterojunction (MoS2/GO-H) is developed, serving as an effective electrode for capacitive deionization (CDI). By combining the inherent advantages of electroadsorption and electrocatalysis, an innovative electroadsorption-electrocatalysis system (EES) strategy is introduced. This system utilizes interface polarization at the MoS2 and GO interface, creating an additional electric field that significantly influences carrier behavior. The MoS2/GO-H electrode, with its extraordinary adsorption capacity of 805.57 mg g-1 under optimal conditions, effectively treated uranium-laden wastewater from a mine, achieving over 90% removal efficiency despite the presence of numerous competing ions at concentrations significantly higher than UO2 2+. Employing density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations, it is found that the MoS2/GO-H total charge density at the Fermi level, enhanced by interfacial polarization, surpasses that of separate MoS2 and GO, markedly boosting conductivity and electrocatalytic effectiveness.

Oxide Derivatives of Nb2CTx MXene and Their Application as Electron Transport Layers in Perovskite Solar Cells: Unraveling the Oxidation Process and Functionalization.

In the realm of photovoltaic research, 2D transition metal carbides (MXenes) have gained significant interest due to their exceptional photoelectric capabilities. However, the instability of MXenes due to oxidation has a direct impact on their practical applications. In this work, the oxidation process of Nb2CTx MXene in aqueous systems is methodically simulated at the atomic level and nanosecond timescales, which elucidates the structural variations influenced by the synergistic effects of water and dissolved oxygen, predicting a transition from metal to semiconductor with 44% C atoms replaced by O atoms in Nb2CTx. Moreover, Nb2CTx with varying oxidation degrees is utilized as electron transport layers (ETLs) in perovskite solar cells (PSCs). Favorable energy level alignments with superior electron transfer capability are achieved by controlled oxidation. By further exploring the composites of Nb2CTx to its derivatives, the strong interaction of the nano-composites is demonstrated to be more effective for electron transport, thus the corresponding PSC achieves a better performance with long-term stability compared with the widely used ETLs like SnO2. This work unravels the oxidation dynamics of Nb2CTx and provides a promising approach to designing ETL by exploiting MXenes to their derivatives for photovoltaic technologies.

Transitioning from 0.5 to 0.9 mT: Protecting against inadvertent activation of magnet mode in active implants.

The "5 gauss line" is a phrase that is likely to be familiar to everyone working with MRI, but what is its significance, how was it defined, and what changes are currently in progress? This review explores the history of 5 gauss (0.5 mT) as a threshold for protecting against inadvertently putting cardiac pacemakers, implantable cardioverter defibrillators, and other active implantable medical devices into a "magnet mode." Additionally, it describes the background to the recent change of this threshold to 9 gauss (0.9 mT) in the International Standard IEC 60601-2-33 edition 4.0 that defines basic safety requirements for MRI. Practical implications of this change and some ongoing and emerging issues are also discussed.

Ab initio molecular dynamics of solvation effects and reactivity at the interface between water and ascorbic acid covered anatase TiO2 (101).

In this work, we present a detailed study of the interaction between ascorbic acid (L-asc) and anatase TiO2 (101) surface both in gas phase and in contact with water by using density functional theory and ab initio molecular dynamics simulations. In gas phase, L-asc strongly binds the TiO2 (101) surface as a dianion (L-asc2- ), adopting a bridging bidentate coordination mode (BB), with the two acid protons transferred to two surface 2-fold bridging oxygens (O2c). AIMD simulations show that the interaction between the organic ligand and the anatase surface is stable and comparable to the vacuum one despite the possible solvent effects and/or possible structural distortions of the ligand. In addition, during the AIMD simulations hydroxylation phenomena occur forming transient H3 O+ ions at the solid-liquid interface. For the first time, our results provide insight into the role of the ascorbic acid on the electronic properties of the TiO2 (101), the influence of the water environment on the ligand-surface interaction and the nature of the solid-liquid interface.

X-ray Insights into Formation of -O Functional Groups on MXenes: Two-Step Dehydrogenation of Adsorbed Water.

Engineered MXene surfaces with more -O functional groups are feasible for realizing higher energy density due to their higher theoretical capacitance. However, there have been only a few explorations of this regulation mechanism. Investigating the formation source and mechanism is conducive to expanding the adjustment method from the top-down perspective. Herein, for the first time, the formation dynamics of -O functional groups on Mo2CTx are discovered as a two-step dehydrogenation of adsorbed water through in situ near-ambient-pressure X-ray photoelectron spectroscopy, further confirmed by ab initio molecular dynamics simulations. From this, the controllable substitution of -F functional groups with -O functional groups is achieved on Mo2CTx during electrochemical cycling in an aqueous electrolyte. The obtained Mo2CTx with rich -O groups exhibits a high capacitance of 163.2 F g -1 at 50 mV s -1, together with excellent stability. These results offer new insights toward engineering surface functional groups of MXenes for many specific applications.

Quantum Size-Driven Spectral Variations in Pillar[n]arene Systems: A Density Functional Theory and Wave Function Assessment.

This study explores the quantum size effects on the optical properties of pillar[n]arene (n = 5, 6, 7, 8) utilizing density functional theory (DFT) and wave function analysis. The mechanisms of electron transitions in one-photon absorption (OPA) and two-photon absorption (TPA) spectra are investigated, alongside the calculation of electron circular dichroism (ECD) for these systems. Transition Density Matrix (TDM) and electron-hole pair density maps are employed to study the electron excitation characteristics, unveiling a notable size dependency. Analysis of the transition electric dipole moment (TEDM) and the transition magnetic dipole moment (TMDM) reveals the electromagnetic interaction mechanism within pillar[n]arene. Raman spectra computations further elucidate vibrational modes, while interactions with external environments are studied using electrostatic potential (ESP) analysis, and electron delocalization is assessed under an external magnetic field, providing insights into the magnetically induced current phenomena within these supramolecular structures. The thermal stability of pillar[n]arene was investigated by ab initio molecular dynamics (AIMD).

Room-Temperature Solid-State Transformation of Na4 SnS4 ⋠14H2 O into Na4 Sn2 S6 ⋠5H2 O: An Unusual Epitaxial Reaction Including Bond Formation, Mass Transport, and Ionic Conductivity.

A highly unusual solid-state epitaxy-induced phase transformation of Na4 SnS4 ⋅ 14H2 O (I) into Na4 Sn2 S6 ⋅ 5H2 O (II) occurs at room temperature. Ab initio molecular dynamics (AIMD) simulations indicate an internal acid-base reaction to form [SnS3 SH]3- which condensates to [Sn2 S6 ]4- . The reaction involves a complex sequence of O-H bond cleavage, S2- protonation, Sn-S bond formation and diffusion of various species while preserving the crystal morphology. In situ Raman and IR spectroscopy evidence the formation of [Sn2 S6 ]4- . DFT calculations allowed assignment of all bands appearing during the transformation. X-ray diffraction and in situ 1 H NMR demonstrate a transformation within several days and yield a reaction turnover of ≈0.38 %/h. AIMD and experimental ionic conductivity data closely follow a Vogel-Fulcher-Tammann type T dependence with D(Na)=6×10-14  m2 s-1 at T=300 K with values increasing by three orders of magnitude from -20 to +25 °C.

Ab Initio Metadynamics Simulations of Hexafluoroisopropanol Solvent Effects: Synergistic Role of Solvent H-Bonding Networks and Solvent-Solute C-H/π Interactions.

The solvent effects in Friedel-Crafts cycloalkylation of epoxides and Cope rearrangement of aldimines were investigated by using ab initio molecular dynamics simulations. Explicit molecular treatments were applied for both reactants and solvents. The reaction mechanisms were elucidated via free energy calculations based on metadynamics simulations. The results reveal that both reactions proceed in a concerted fashion. Key solvent-substrate interactions are identified from the structures of transition states with explicit solvent molecules. The remarkable promotion effect of hexafluoroisopropanol solvent is ascribed to the synergistic effect of H-bonding networks and C-H/π interactions with substrates.

High-Fidelity 3D Stray Magnetic Field Mapping of Smartphones to Address Safety Considerations with Active Implantable Electronic Medical Devices.

Case reports indicate that magnets in smartphones could be a source of electromagnetic interference (EMI) for active implantable medical devices (AIMD), which could lead to device malfunction, compromising patient safety. Recognizing this challenge, we implemented a high-fidelity 3D magnetic field mapping (spatial resolution 1 mm) setup using a three-axis Hall probe and teslameter, controlled by a robot (COSI Measure). With this setup, we examined the stray magnetic field of an iPhone 13 Pro, iPhone 12, and MagSafe charger to identify sources of magnetic fields for the accurate risk assessment of potential interferences with AIMDs. Our measurements revealed that the stray fields of the annular array of magnets, the wide-angle camera, and the speaker of the smartphones exceeded the 1 mT limit defined by ISO 14117:2019. Our data-driven safety recommendation is that an iPhone 13 Pro should be kept at least 25 mm away from an AIMD to protect it from unwanted EMI interactions. Our study addresses safety concerns due to potential device-device interactions between smartphones and AIMDs and will help to define data-driven safety guidelines. We encourage vendors of electronic consumer products (ECP) to provide information on the magnetic fields of their products and advocate for the inclusion of smartphones in the risk assessment of EMI with AIMDs.

Alcohol-Induced Strong Metal-Support Interactions in a Supported Copper/ZnO Catalyst.

Tuning the strong metal-support interaction (SMSI) in metal catalysts is a promising strategy to improve their catalytic performance. In this article, we systematically investigated the influences of different alcohol/water mixtures on the evolution of the interfacial structure of Cu/ZnO catalysts in the reduction stage. A series of in situ characterization and theoretical simulation studies were performed to elucidate the various mechanisms of alcohol induced SMSI. It was found that when methanol/water is added to H2 during the reduction pretreatment, more oxygen vacancies are formed on the ZnO support, which facilitates the dissociation of H2 O and the hydroxylation of ZnO species. Such promotion eventually favors the SMSI between Cu and ZnO and increases the catalytic activity for the methanol steam reforming reaction. In contrast, the addition of ethanol/water and 1-propanol/water during reduction leads to a physical blockage of the catalyst by alcohol molecules, poisoning the active Cu sites and limiting the migration of ZnO species.

Molecular mechanisms from reaction coordinate graph enabled multidimensional free energies illustrated on water dimer hydrogen bonding.

Computing the free energies of molecular mechanisms in multidimensional space relies on combinations of geometrically complex reaction coordinates. We show how a graph theory implementation reduces complexity, and illustrate this on the arrangements of hydrogen bonding of a water dimer. The reaction coordinates and forces are computed using graphs that define the dependencies on the atoms in the Free Energy from Adaptive Reaction Coordinate Forces (FEARCF) library. The library can be interfaced with classical molecular dynamics as well as quantum molecular dynamics packages. Multidimensional interdependent reaction coordinates are constructed to produce complex free energy hypersurfaces. The reaction coordinates are graphed from atomic and molecular components to define points, distances, vectors, angles, planes and combinations thereof. The resultant free energy surfaces that are a function of the distance, angles, planes, and so on, can represent molecular mechanisms in reduced dimensions from the component atomic Cartesian coordinate degrees of freedom. The FEARCF library can be interfaced with any molecular package. Here, we demonstrate the link to NWChem to compute a hyperdimensional DFT (aug-cc-pVDZ basis set and X3LYP exchange correlation functionals) free energy space of a water dimer. Analysis of the water dimer free energy hypervolume reveals that while the chain and cyclic hydrogen bonding configurations are located in stable minimum energy wells, the bifurcated hydrogen bond configuration is a gateway to instability and dimer dissociation.

Discovery of Complex Binding and Reaction Mechanisms from Ternary Gases in Rare Earth Metal-Organic Frameworks.

Understanding the selectivity of metal-organic frameworks (MOFs) to complex acid gas streams will enable their use in industrial applications. Herein, ab initio molecular dynamic simulations (AIMD) were used to simulate ternary gas mixtures (H2 O-NO2 -SO2 ) in rare earth 2,5-dihydroxyterephthalic acid (RE-DOBDC) MOFs. Stronger H2 O gas-metal binding arose from thermal vibrations in the MOF sterically hindering access of SO2 and NO2 molecules to the metal sites. Gas-gas and gas-linker interactions within the MOF framework resulted in the formation of multiple secondary gas species including HONO, HNO2 , NOSO, and HNO3 - . Four gas adsorption sites were identified along with a new de-protonation reaction mechanism not observable through experiment. This study not only provides valuable information on competitive gas binding energies in the MOF, it also provides important chemical insights into transient chemical reactions and mechanisms.

Elucidating the Germanium Distribution in ITQ-13 Zeolites by Density Functional Theory.

ITQ-13 is a medium-pore zeolite that can be prepared in all-silica form and as silicogermanate with Si/Ge ratios as low as 3. Usually synthesised in the presence of fluoride, ITQ-13 is among the very few systems containing fluoride anions in two distinct cage types, cube-like d4r units and [4 ⋅ 56 ] cages. Here, dispersion-corrected density functional theory (DFT) calculations are used to investigate the energetically most favourable Ge distributions for Si/Ge ratios between 55 and 6. The calculations show Ge atoms are incorporated at both the corners of d4r cages and at the basal plane of the [4 ⋅ 56 ] cages, in accordance with 19 F NMR spectroscopy. Two Ge atoms at adjacent corners of [4 ⋅ 56 ] cages are stable at the highest Ge content considered (Si/Ge=6). Such a local environment has not yet been considered in the experimental literature. A calculation of the corresponding 19 F NMR resonance points to overlap with other resonances, which might preclude its clear identification. Additional calculations investigate the variation of the dynamic behaviour of the fluoride anions as a function of the local environment as well as the selective defluorination of the [4 ⋅ 56 ] cages.

A Machine Learning Model to Classify Dynamic Processes in Liquid Water.

The dynamics of water molecules plays a vital role in understanding water. We combined computer simulation and deep learning to study the dynamics of H-bonds between water molecules. Based on ab initio molecular dynamics simulations and a newly defined directed Hydrogen (H-) bond population operator, we studied a typical dynamic process in bulk water: interchange, in which the H-bond donor reverses roles with the acceptor. By designing a recurrent neural network-based model, we have successfully classified the interchange and breakage processes in water. We have found that the ratio between them is approximately 1 : 4, and it hardly depends on temperatures from 280 to 360 K. This work implies that deep learning has the great potential to help distinguish complex dynamic processes containing H-bonds in other systems.

A perspective on thermal stability and mechanical properties of 2D Indium Bismide fromab initiomolecular dynamics.

Identification and synthesis of 2D topological insulators is particularly elusive. According to previousab initiopredictions 2D InBi (Indium Bismide) is a material exhibiting topological properties which are combined with a band gap suitable for practical applications. We employab initiomolecular dynamics (AIMD) simulations to assess the thermal stability as well as the mechanical properties such as elastic modulus and stress-strain curves of 2D InBi. The obtained new knowledge adds further characteristics appealing to the feasibility of its synthesis and its potential applications. We find that pristine 2D InBi, H-InBi (hydrogenated 2D InBi) as well as 2D InBi heterostructures with graphene are all stable well above room temperature, being the calculated thermal stability for pristine 2D InBi 850 K and for H-InBi in the range above 500 K. The heterostructures of 2D InBi with graphene exhibit thermal stability exceeding 1000 K. In terms of mechanical properties, pristine 2D InBi exhibits similarities with another 2D material, stanene. The fracture stress for 2D InBi is estimated to be ∼3.3 GPa (∼3.6 GPa for stanene) while elastic modulus of 2D InBi reads ∼34 GPa (to compare with ∼23 GPa for stanene). Overall, the thermal stability, elastic, and fracture resistant properties of 2D InBi and its heterostructures with graphene appear as high enough to motivate future attempts directed to its synthesis and characterization.

Radiofrequency-induced heating of broken and abandoned implant leads during magnetic resonance examinations.

PURPOSE: The risks of RF-induced heating of active implantable medical device (AIMD) leads during MR examinations must be well understood and realistically assessed. In this study, we evaluate the potential additional risks of broken and abandoned (cut) leads. METHODS: First, we defined a generic AIMD with a metallic implantable pulse generator (IPG) and a 100-cm long lead containing 1 or 2 wires. Next, we numerically estimated the deposited in vitro lead-tip power for an intact lead, as well as with wire breaks placed at 10 cm intervals. We studied the effect of the break size (wire gap width), as well as the presence of an intact wire parallel to the broken wire, and experimentally validated the numeric results for the configurations with maximum deposited in vitro lead-tip power. Finally, we performed a Tier 3 assessment of the deposited in vivo lead-tip power for the intact and broken lead in 4 high resolution virtual population anatomic models for over 54,000 MR examination scenarios. RESULTS: The enhancement of the deposited lead-tip power for the broken leads, compared to the intact lead, reached 30-fold in isoelectric exposure, and 16-fold in realistic clinical exposures. The presence of a nearby intact wire, or even a nearby broken wire, reduced this enhancement factor to <7-fold over the intact lead. CONCLUSION: Broken and abandoned leads can pose increased risk of RF-induced lead-tip heating to patients undergoing MR examinations. The potential enhancement of deposited in vivo lead-tip power depends on location and type of the wire break, lead design, and clinical routing of the lead, and should be carefully considered when performing risk assessment for MR examinations and MR conditional labeling.