ABSTRACT
OBJECTIVE@#To investigate the effect of bone cement containing recombinant human basic fibroblast growth factor (rhbFGF) and recombinant human bone morphogenetic protein-2 (rhBMP-2) in percutaneous kyphoplasty(PKP)treatment of osteoporotic vertebral compression fracture(OVCF).@*METHODS@#A total of 103 OVCF patients who underwent PKP from January 2018 to January 2021 were retrospectively analyzed, including 40 males and 63 females, aged from 61 to 78 years old with an average of (65.72±3.29) years old. The injury mechanism included slipping 33 patients, falling 42 patients, and lifting injury 28 patients. The patients were divided into three groups according to the filling of bone cement. Calcium phosphate consisted of 34 patients, aged(65.1±3.3) years old, 14 males and 20 females, who were filled with calcium phosphate bone cement. rhBMP-2 consisted of 34 patients, aged (64.8±3.2) years old, 12 males and 22 females, who were filled with bone cement containing rhBMP-2. And rhbFGF+rhBMP-2 consisted of 35 patients, aged (65.1±3.6) years old, 14 males and 21 females, who were filled with bone cement containing rhbFGF and rhBMP-2. Oswestry disability index (ODI), bone mineral density, anterior edge loss height, anterior edge compression rate of injured vertebra, visual analog scale (VAS) of pain, and the incidence of refracture were compared between groups.@*RESULTS@#All patients were followed for 12 months. Postoperative ODI and VAS score of the three groups decreased (P<0.001), while bone mineral density increased (P<0.001), anterior edge loss height, anterior edge compression rate of injured vertebra decreased first and then slowly increased (P<0.001). ODI and VAS of group calcium phosphate after 1 months, 6 months, 12 months were lower than that of rhBMP-2 and group rhbFGF+rhBMP-2(P<0.05), bone mineral density after 6 months, 12 months was higher than that of rhBMP-2 and group calcium phosphate(P<0.05), and anterior edge loss height, anterior edge compression rate of injured vertebra of group rhbFGF+rhBMP-2 after 6 months and 12 months were lower than that of group rhBMP-2 and group calcium phosphate(P<0.05). There was no statistical difference in the incidence of re-fracture among the three groups (P>0.05).@*CONCLUSION@#Bone cement containing rhbFGF and rhBMP-2 could more effectively increase bone mineral density in patients with OVCF, obtain satisfactory clinical and radiological effects after operation, and significantly improve clinical symptoms.
Subject(s)
Male , Female , Humans , Middle Aged , Aged , Bone Cements/therapeutic use , Fractures, Compression/complications , Retrospective Studies , Spinal Fractures/complications , Osteoporotic Fractures/etiology , Kyphoplasty/adverse effects , Vertebroplasty/adverse effects , Calcium Phosphates/therapeutic use , Treatment Outcome , Recombinant Proteins , Transforming Growth Factor beta , Fibroblast Growth Factor 2 , Bone Morphogenetic Protein 2ABSTRACT
SUMMARY: The aim of this study was to characterize a commercial beta tricalcium phosphate (β-TCP) block allograft for use in maxillofacial reconstruction, evaluating its homogeneity, porosity and mineralization. Two commercial 5 x 5 x10 mm chronOS Vivify β-TCP blocks were used, which were evaluated by a STEM SU-3500 variable pressure scanning electron microscope (SEM-STEM) (Hitachi, Japan). For the semi-quantitative microanalysis of elements, the QUANTAX 100 energy dispersive x-ray spectrometer detector (EDX) (Bruker, Germany) was used. The homogeneity of the structural morphology, macropore and micropore size and component homogeneity were evaluated. The microscopic analysis showed micropores of 164.92 mm (± 35.032 mm) in diameter in the outer area and micropores in the inner area of 54.44 mm (± 17.676 mm). The formation of porosities and irregularities present in the block was heterogeneous between the outer and inner surfaces. The mineral content of the blocks presented homogeneity with the presence of carbon (2.02 %), oxygen (44.33 %), phosphate (16.62 %) and calcium (37.87 %). The β-TCP block can be used in bone reconstruction but the presence of reduced macropore and micropore sizes could limit efficiency in the substitution and bone regeneration phase.
RESUMEN: El objetivo de este estudio fue caracterizar un aloinjerto de bloqueo de fosfato tricálcico (β-TCP) comercial para su uso en la reconstrucción maxilofacial, evaluando su homogeneidad, porosidad y mineralización. Se utilizaron dos bloques comerciales de 5 x 5 x 10 mm de vivify β-TCP de chronOS, que se evaluaron mediante un microscopio electrónico de barrido de presión variable STEM SU-3500 (SEM-STEM) (Hitachi, Japón). Para el microanálisis de elementos semicuantitativo, se utilizó el detector de espectrómetro de rayos X de dispersión de energía QUANTAX 100 (EDX) (Bruker, Alemania). Se evaluó la homogeneidad de la morfología estructural, el tamaño del macroporo y microporo y la homogeneidad de los componentes. El análisis microscópico mostró microporos de 164,92 mm (± 35,032 mm) de diámetro en el área externa y microporos en el área interna de 54,44 mm (± 17,676 mm). La formación de porosidades e irregularidades presentes en el bloque fue heterogénea entre las superficies externas e internas. El contenido mineral de los bloques presentó homogeneidad con la presencia de carbono (2,02 %), oxígeno (44,33 %), fosfato (16,62 %) y calcio (37,87 %). El bloque β-TCP se puede utilizar en la reconstrucción ósea, pero la presencia de macroporos y tamaños de microporos reducidos podría limitar la eficacia en la fase de sustitución y regeneración ósea.
Subject(s)
Humans , Calcium Phosphates/therapeutic use , Bone Transplantation/methods , Bone Substitutes/therapeutic use , Plastic Surgery Procedures/methods , Bone Regeneration , Microscopy, Electron, Scanning , Face/surgery , Tissue Scaffolds , Allografts , Maxilla/surgeryABSTRACT
Purpose: to compare the healing process of a defect of compact bone tissue after the implantation of osteoplastic materials based on ß-tricalcium phosphate ("ChronOS™" and "Calc-i-oss®"), which differ by manufacturer, geometrical shape and microscopic structure. Methods: the experiment was performed on 48 white male Wistar rats. In the middle third of the diaphysis of the femur we produced a perforated defect of 2.5 mm diameter in the medullary canal, which in the animals of the first group was filled with the osteoplastic material "ChronOS™" (block, Synthes, Switzerland), and in the animals of the second group with "Calc-i-oss®" (granules, «Degradable Solutions Dental¼, Switzerland). Fragments of the injured bones were studied on the 60th and 120th day by light microscopy with morphometry and by scanning electron microscopy. Results: it was found that regardless the geometric shape and the microscopic structure, both osteoplastic materials show high biocompatibility, osteoconductive properties, good integration with bone tissue of the regenerate, and that the microscopic structure of ß-tricalcium phosphate ("ChronOS™") may significantly affect the microscopic structure of bone tissue of the regenerate, which manifests itself in the specificity of its geometric shape. It was noticed that osteoplastic materials "ChronOS™" and "Calc-i-oss®" almost at the same rate were subjected to resorption and replacement by the bone tissue, the ratio of which was 22.55±1.25 to 77.45±1.25 and 25.72±2.06% to 74.28±2.06% on the 60th day of the experiment, and 17.65±1.09 to 82.35±1.09 and 18.31±1.54% to 81.69±1.54% on the 120th day. (AU)
Objetivo: Comparar el proceso de cicatrización de un defecto del tejido óseo compacto tras la implantación de materiales osteoplásticos a base de fosfato ß-tricálcico («ChronOS™¼ and «Calc-i-oss®¼) que difieren según el fabricante en la forma geométrica y estructura microscópica. El estudio fue realizado en 48 ratas Wistar machos en los cuales se produjo, en el tercio medio de la diáfisis del fémur, un defecto perforado de 2,5 mm de diámetro, el cual fue llenado con el material «ChronOS™¼ (block, Synthes, Switzerland) en un grupo y con «Calc-i-oss®¼ (granules, «Degradable Solutions Dental¼, Switzerland) en el segundo grupo. El sector del defecto fue evaluado en los días 60 y 120 por microscopía óptica y por microscopía electrónica de barrido. Resultados: independientemente de la forma geométrica y la estructura microscópica, ambos materiales osteoplásticos mostraron alta biocompatibilidad, propiedades osteoconductivas y buena integración con el tejido óseo regenerado. La estructura microscópica del fosfato ß-tricálcico («ChronOS™¼) puede afectar significativamente a la estructura microscópica del tejido óseo regenerado, que se manifiesta en su forma geométrica. Adicionalmente, se observó que ambos materiales osteoplásticos «ChronOS™¼ y «Calc-i-oss®¼ mostraron valores similares de resorción y reemplazo por tejido óseo, cuya relación al 60º día del experimento fue de 22,55±1,25 a 77,45±1,25 y 25,72±2,06% a 74,28±2,06%, y a los 120 días de 17,65±1,09 a 82,35±1,09 y de 18,31±1,54% a 81,69±1,54% respectivamente. (AU)
Subject(s)
Animals , Rats , Calcium Phosphates/therapeutic use , Bone Substitutes/therapeutic use , Femur/injuries , Osteogenesis , Prostheses and Implants , Biocompatible Materials , Bone Resorption , Materials Testing , Calcium Phosphates/chemistry , Rats, Wistar , Bone Substitutes/chemistry , Femur/surgery , Femur/pathology , Femur/ultrastructure , Ketamine/administration & dosage , Acepromazine/administration & dosageABSTRACT
Abstract Objectives This study aimed to evaluate the potential of adipose-derived stem cells (ASCs) combined with a modified α-tricalcium phosphate (α-TCP) or gelatin sponge (GS) scaffolds for bone healing in a rat model. Material and Methods Bone defects were surgically created in the femur of adult SHR rats and filled with the scaffolds, empty or combined with ASCs. The results were analyzed by histology and histomorphometry on days seven, 14, 30, and 60. Results Significantly increased bone repair was observed on days seven and 60 in animals treated with α-TCP/ASCs, and on day 14 in the group treated with GS/ASCs, when compared with the groups treated with the biomaterials alone. Intense fibroplasia was observed in the group treated with GS alone, on days 14 and 30. Conclusions Our results showed that the use of ASCs combined with α-TCP or GS scaffolds resulted in increased bone repair. The higher efficacy of the α-TCP scaffold suggests osteoconductive property that results in a biological support to the cells, whereas the GS scaffold functions just as a carrier. These results confirm the potential of ASCs in accelerating bone repair in in vivo experimental rat models. These results suggest a new alternative for treating bone defects.
Subject(s)
Animals , Male , Biocompatible Materials/pharmacology , Bone Regeneration/drug effects , Calcium Phosphates/pharmacology , Adipose Tissue/cytology , Stem Cell Transplantation/methods , Tissue Scaffolds , Gelatin Sponge, Absorbable/pharmacology , Osteogenesis/drug effects , Rats, Inbred SHR , Tetrazolium Salts , Time Factors , Wound Healing/drug effects , Biocompatible Materials/therapeutic use , Calcium Phosphates/therapeutic use , Cell Adhesion/drug effects , Cells, Cultured , Reproducibility of Results , Treatment Outcome , Models, Animal , Cell Proliferation/drug effects , Femur/surgery , Femur/pathology , Fibroblasts/drug effects , Formazans , Gelatin Sponge, Absorbable/therapeutic useABSTRACT
El presente estudio evalúa los resultados de la utilización del fosfato tricálcico beta en la preservación de alvéolos postextracción al emplearlo solo o en conjunto con membranas no reabsorbibles. Se seleccionaron 18 dientes con indicación de extracción y con condiciones favorables para la preservación del alvéolo y posterior colocación de un implante oseointegrado. En 10 alvéolos se utilizó como relleno fosfato tricálcico beta en conjunto con membrana no reabsorbible, y 8 alvéolos fueron tratados solamente con fosfato tricálcico beta. Previo a la cirugía se evaluó el ancho y alto de cada alvéolo, mediante una tomografía computarizada de alta resolución, evaluación que fue repetida 6 meses después de realizada la intervención quirúrgica. Al momento de efectuar la técnica quirúrgica para la instalación de los implantes se tomaron muestras histológicas del sitio de colocación del implante para estudiar las características histológicas del sitio injertado después de 6 meses de realizada la cirugía de extracción dentaria y preservación de alvéolo. El uso de fosfato tricálcico beta, independiente o no del uso de membrana, mantuvo la altura del alvéolo transcurridos 6 meses desde su colocación, mientras que el ancho del alvéolo se mantuvo solo en el grupo sin membrana. Los resultados histológicos demostraron cantidades variables de regeneración ósea.
The present study evaluated the results of the post-extraction socket preservation technique using Beta-Tricalcium Phosphate with and without the use of a non-resorbable membrane. A total of 18 teeth with indication of extraction and socket preservation were selected, with 10 alveoli being treated with Beta-Tricalcium Phosphate combined with a non-resorbable membrane, and the other 8 with Beta-Tricalcium Phosphate only. The width and height of each socket was evaluated using computed tomography, prior to the extraction, and 6 months after the surgery. At the time of performing the surgical technique for installing the implants, histological specimens were taken from the implant site in order to study the graft site 6 months after the dental extraction surgery and alveoli preservation.The use of Beta-Tricalcium Phosphate, whether a membrane is used or not, maintained the alveolar height 6 months after the extraction, while the width of the alveolus only remained in the group without membrane. Histological results showed varying amounts of bone regeneration.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Bone Regeneration , Bone Resorption/prevention & control , Calcium Phosphates/therapeutic use , Dental Implantation, Endosseous , Alveolar Process/anatomy & histology , Tooth Extraction , Biocompatible Materials , Membranes, ArtificialABSTRACT
PURPOSE: To evaluate experimental cranial vault reconstructions, by combining bone morphogenetic protein type 2 (BMP-2) and different matrices. METHODS: Fourty-nine animals were initially included (seven per group). We designed an experimental, open, prospective and comparative study, divided in seven groups: 1 - BMP-2+calcium phosphate (BT); 2 - BMP-2+acellular dermal matrix (BM); 3 - BMP-2+calcium alginate (BA); 4 - TCP; 5 - MDM; 6 - ALG; 7 - Bone autograft (BAG). A bone failure was created in left parietal bone of adult male mice. At the same procedure reconstruction was performed. After five weeks, animals were sacrificed, and reconstruction area was removed to histological analysis. After exclusion due to death or infection, thirty-eight animals were evaluated (BT=5; BM=6; BA=6; TCP=7; MDM=3; ALG=6; BAG=5). RESULTS: A higher incidence of infection has occurred in MDM group (57%, P=0.037). In cortical fusion, groups BAG, TCP, and BMP-2+TCP (BT) obtained the best scores, comparing to the others (P=0.00846). In new bone formation, groups BT, BAG, and TCP have presented the best scores (P=0.00835). When neovascularization was considered, best groups were BMP-2+MDM (BM), BMP-2+ALG (BA), TCP, and MDM (P=0.001695). BAG group was the best in bone marrow formation, followed by groups BT and TCP (P=0.008317). CONCLUSIONS: Bone morphogenetic protein type 2 increased bone regeneration in experimental skull reconstruction, especially when combined to calcium phosphate. Such association was even comparable to bone autograft, the gold-standard treatment, in some histological criteria. .
Subject(s)
Animals , Male , Acellular Dermis , Alginates/therapeutic use , /therapeutic use , Bone Regeneration/drug effects , Calcium Phosphates/therapeutic use , Skull/surgery , Biocompatible Materials/therapeutic use , Bone Regeneration/physiology , Bone Substitutes/therapeutic use , Bone Transplantation/methods , Disease Models, Animal , Glucuronic Acid/therapeutic use , Hexuronic Acids/therapeutic use , Neovascularization, Physiologic/drug effects , Neovascularization, Physiologic/physiology , Reference Values , Reproducibility of Results , Skull/pathology , Time Factors , Treatment OutcomeABSTRACT
Aim: The aim of this study was to evaluate the effectiveness of dentifrices containing high concentrations of sodium fluoride (NaF) and casein phosphopeptide‑amorphous calcium phosphate cream plus fluoride (CPP‑ACPF) in prevention of the erosion in a simulated oral environment study model. Subjects and Methods: Fifteen flat human enamel specimens were polished and half of the surfaces were protected with adhesive tape. Initial Knoop microhardness (KHN) and surface roughness (SR) were measured, and specimens were assigned to four groups: Control (placebo toothpaste – G1); CPP‑ACPF (G2), NaF 1450 ppm (G3), and NaF 5000 ppm (G4). Enamel surfaces were brushed 3 times daily in association with demineralization‑remineralization cycles (5s in cola drink + 5s in artificial saliva/10 cycles/twice daily) and the specimens were maintained in a salivary flow simulator apparatus. After 14 days, KHN and SR were measured again, and the enamel surfaces were analyzed by scanning electronic microscopy (SEM). Statistical Analysis Used: Data were analyzed using the two‑way ANOVA and Student–Newman– Keuls multiple range test (α =0.05). Results: All the tested groups presented a decrease in KHN after 14 days (P < 0.05). There was no statistical significance among materials tested. Significant increase in SR was observed for all groups. SEM analysis showed morphological alterations with honeycomb structures in enamel surfaces in the four experimental groups. Conclusions: It was concluded that tooth brushing with dentifrices with high concentration of NaF and CPP‑ACPF cream was not able to prevent enamel erosion in simulated oral environment.
Subject(s)
Caseins/therapeutic use , Calcium Phosphates/therapeutic use , Dental Enamel , Sodium Fluoride/therapeutic use , Toothpastes/therapeutic use , Tooth Erosion/prevention & controlABSTRACT
O objetivo deste estudo foi avaliar in vitro por meio da Fluorescência de Raios X por Dispersão de Energia (XRF), Microdureza Vickers (MV) e Microscopia Eletrônica de Varredura (MEV) o efeito remineralizante de diferentes princípios bioativos, tais quais, nanopartículas de hidroxiapatita de cálcio (nanoHAp) associadas ou não a fluoreto, fosfopeptídeos de caseína do leite e fosfato de cálcio amorfo (CPP-ACP) associados ou não a fluoreto, fluoreto de sódio e saliva no esmalte dental bovino submetido a ciclagem des-remineralizante simulando lesão erosiva por alto desafio ácido. Foram obtidos 58 corpos de prova (CP) a partir de 58 incisivos bovinos que foram divididos aleatoriamente em 8 grupos, com 7 CP cada um e 2 CP para obtenção de imagem em MEV do esmalte hígido. Cada grupo foi denominado conforme os respectivos tratamentos a serem utilizados. Grupo 1 (G1) Controle; Grupo 2 (G2) Desensibilize Nano P experimental (nanopartículas de hidroxiapatita de cálcio); Grupo 3 (G3) Desensibilize Nano P (nanopartículas de hidroxiapatita de cálcio e flúor); Grupo4 (G4) GC Tooth Mousse (CPP-ACP, fosfopeptídios de caseína e fosfato de cálcio amorfo Recaldent ); Grupo 5 (G5) GC Tooth Mousse Plus (CPP-ACP, fosfopeptídios de caseína e fosfato de cálcio amorfo Recaldent + 900 ppm de flúor); Grupo 6 (G6) solução aquosa de fluoreto de sódio (0,05%); Grupo 7 (G7) solução aquosa de nanopartículas de hidroxiapatita de cálcio (0,375%) e Grupo 8 (G8) solução aquosa de nanopartículas de hidroxiapatita de cálcio (0,375%) + flúor (0,05%). Foram obtidos os valores de XRF e MV antes e depois do tratamento. Durante um período experimental de 10 dias, os CPs foram submetidos a um processo cíclico de des-remineralização incluindo vários ataques diários com ácido cítrico 0,05M (pH 2,3), 6 vezes de 2 minutos ao dia, bem como as aplicações das soluções teste e períodos de remineralização em saliva artificial. O tempo entre os ciclos ...
The aim of this study was to evaluate in vitro by X-ray fluorescence technique (XRF), surface microhardness (SMH) and SEM the remineralizing effect of different bioactive principles.We used 58bovine incisors that were sectioned into fragments (CP) and randomly divided into 8 groups. All teeth were initially evaluated to obtain the count of elements phosphorus (P) and calcium (Ca) interpreted from a range of X-Ray Fluorescence obtained by Artax 200 and to obtain the initial SMH. Over a 10-day experimental period, the enamel samples weresubjected to erosive demineralization that was performed by immersion in 250 ml 0.05 M citric acid (pH 2.3) for 6 X 2 min per day. Subsequently, the samples were rinsed with distilled water for 1 min and afterwards received the corresponding treatments Group 1 (G1) Positive control; Group 2 (G2) Experimental Desensibilize Nano P (nanoparticles of calcium hydroxyapatite); Group 3 (G3) Desensibilize Nano P (nanoparticles of calcium hydroxyapatite and Fluor); Group 4 (G4) Recaldent: GC Tooth Mousse (CPP-ACP fosfopeptídios casein and amorphous calcium phosphate-Recaldent ), Group 5 (G5) GC Tooth Mousse (CPP-ACP fosfopeptides casein and amorphous calcium phosphate-Recaldent and 900 ppm Fluor); Group 6 (G6) NaF aqueous solution; (G7) nanoHAp aqueous solution and Group 8 (G8) nanoHAp + NaF aqueous solution. The samples were rinsed again with distilled water for 1 min and stored in artificial saliva. The time between cycles was 1.5 h. In the control group, the samples were eroded 6 X 2 min per day and stored in artificial saliva. All CP were evaluated again. SEM images for surface analysis were obtained after treatment. Through statistical analysis by Student t test ( p = 0.05 ) , the following results were found: control group had a severe demineralization, there was an increase in the count of P in all treated groups except G1 , that was an increase in Ca count in all treated ...
Subject(s)
Animals , Cattle , Dental Enamel , Tooth Erosion/therapy , Tooth Remineralization , Caseins/therapeutic use , Durapatite/therapeutic use , Fluorescence , Sodium Fluoride/therapeutic use , Fluorides/therapeutic use , Calcium Phosphates/therapeutic use , Hardness Tests , Materials Testing , Microscopy, Electron, Scanning , SalivaABSTRACT
O objetivo deste estudo foi avaliar in vitro por meio da Fluorescência de Raios X por Dispersão de Energia (XRF), Microdureza Vickers (MV) e Microscopia Eletrônica de Varredura (MEV) o efeito remineralizante de diferentes princípios bioativos, tais quais, nanopartículas de hidroxiapatita de cálcio (nanoHAp) associadas ou não a fluoreto, fosfopeptídeos de caseína do leite e fosfato de cálcio amorfo (CPP-ACP) associados ou não a fluoreto, fluoreto de sódio e saliva no esmalte dental bovino submetido a ciclagem des-remineralizante simulando lesão erosiva por alto desafio ácido. Foram obtidos 58 corpos de prova (CP) a partir de 58 incisivos bovinos que foram divididos aleatoriamente em 8 grupos, com 7 CP cada um e 2 CP para obtenção de imagem em MEV do esmalte hígido. Cada grupo foi denominado conforme os respectivos tratamentos a serem utilizados. Grupo 1 (G1) Controle; Grupo 2 (G2) Desensibilize Nano P experimental (nanopartículas de hidroxiapatita de cálcio); Grupo 3 (G3) Desensibilize Nano P (nanopartículas de hidroxiapatita de cálcio e flúor); Grupo4 (G4) GC Tooth Mousse (CPP-ACP, fosfopeptídios de caseína e fosfato de cálcio amorfo Recaldent ); Grupo 5 (G5) GC Tooth Mousse Plus (CPP-ACP, fosfopeptídios de caseína e fosfato de cálcio amorfo Recaldent + 900 ppm de flúor); Grupo 6 (G6) solução aquosa de fluoreto de sódio (0,05%); Grupo 7 (G7) solução aquosa de nanopartículas de hidroxiapatita de cálcio (0,375%) e Grupo 8 (G8) solução aquosa de nanopartículas de hidroxiapatita de cálcio (0,375%) + flúor (0,05%). Foram obtidos os valores de XRF e MV antes e depois do tratamento. Durante um período experimental de 10 dias, os CPs foram submetidos a um processo cíclico de des-remineralização incluindo vários ataques diários com ácido cítrico 0,05M (pH 2,3), 6 vezes de 2 minutos ao dia, bem como as aplicações das soluções teste e períodos de remineralização em saliva artificial. O tempo entre os ciclos ...
The aim of this study was to evaluate in vitro by X-ray fluorescence technique (XRF), surface microhardness (SMH) and SEM the remineralizing effect of different bioactive principles.We used 58bovine incisors that were sectioned into fragments (CP) and randomly divided into 8 groups. All teeth were initially evaluated to obtain the count of elements phosphorus (P) and calcium (Ca) interpreted from a range of X-Ray Fluorescence obtained by Artax 200 and to obtain the initial SMH. Over a 10-day experimental period, the enamel samples weresubjected to erosive demineralization that was performed by immersion in 250 ml 0.05 M citric acid (pH 2.3) for 6 X 2 min per day. Subsequently, the samples were rinsed with distilled water for 1 min and afterwards received the corresponding treatments Group 1 (G1) Positive control; Group 2 (G2) Experimental Desensibilize Nano P (nanoparticles of calcium hydroxyapatite); Group 3 (G3) Desensibilize Nano P (nanoparticles of calcium hydroxyapatite and Fluor); Group 4 (G4) Recaldent: GC Tooth Mousse (CPP-ACP fosfopeptídios casein and amorphous calcium phosphate-Recaldent ), Group 5 (G5) GC Tooth Mousse (CPP-ACP fosfopeptides casein and amorphous calcium phosphate-Recaldent and 900 ppm Fluor); Group 6 (G6) NaF aqueous solution; (G7) nanoHAp aqueous solution and Group 8 (G8) nanoHAp + NaF aqueous solution. The samples were rinsed again with distilled water for 1 min and stored in artificial saliva. The time between cycles was 1.5 h. In the control group, the samples were eroded 6 X 2 min per day and stored in artificial saliva. All CP were evaluated again. SEM images for surface analysis were obtained after treatment. Through statistical analysis by Student t test ( p = 0.05 ) , the following results were found: control group had a severe demineralization, there was an increase in the count of P in all treated groups except G1 , that was an increase in Ca count in all treated ...
Subject(s)
Animals , Cattle , Dental Enamel , Tooth Erosion/therapy , Tooth Remineralization , Caseins/therapeutic use , Durapatite/therapeutic use , Fluorescence , Sodium Fluoride/therapeutic use , Fluorides/therapeutic use , Calcium Phosphates/therapeutic use , Hardness Tests , Materials Testing , Microscopy, Electron, Scanning , SalivaABSTRACT
The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h. Four daily erosive cycles of 5 minutes of immersion in a cola drink and 2 h in artificial saliva were conducted for 5 days. KHN readings were performed at baseline and after 5 days. The percentage of enamel hardness change (%KHN) was obtained after erosion. The surface topography was evaluated by atomic force microscopy (AFM). The data were tested using ANOVA, Tukey's and paired-T tests (p < 0.05). After an erosive challenge, there was no statistically significant difference between the control (96.8 ± 11.4 KHN / 72.4 ± 3.0 %KHN) and the varnish (91.7 ± 14.1 KHN / 73.4 ± 5.5 %KHN) groups. The nanophosphate group showed lower enamel hardness loss (187.2 ± 27.9 / 49.0 ± 7.9 %KHN), compared with the CPP-ACP group (141.8 ± 16.5 / 60.6 ± 4.0 %KHN), and both were statistically different from the varnish and the control groups. AFM images showed a rough surface for the control and the varnish groups, a non-homogeneous layer with globular irregularities for CPP-ACP, and a thick homogeneous layer for the nanophosphate group. None of the agents provided protection against the development of erosion; however, nanophosphate paste was able to reduce enamel surface softening after the erosive challenge.
Subject(s)
Humans , Calcium Phosphates/therapeutic use , Caseins/therapeutic use , Dental Enamel/drug effects , Tooth Erosion/prevention & control , Tooth Remineralization/methods , Analysis of Variance , Carbonated Beverages , Dental Enamel/chemistry , Hardness Tests , Microscopy, Atomic Force , Nanoparticles , Random Allocation , Reproducibility of Results , Saliva, Artificial/chemistry , Surface Properties/drug effects , Time FactorsABSTRACT
OBJECTIVE: To evaluate in vitro the effects of tooth whitening using gel with Amorphous Calcium Phosphate (ACP) on the bond strength of metal brackets. METHODS: Thirty-six bovine incisors were sectioned at the crown-root interface, and the crowns were then placed in PVC cylinders. The specimens were divided into 3 groups (n = 12) according to whitening treatment and type of gel used, as follows: G1 (control) = no whitening; G2 = whitening with gel not containing ACP (Whiteness Perfect - FGM), G3 = whitening with gel containing ACP (Nite White ACP - Discus Dental). Groups G2 and G3 were subjected to 14 cycles of whitening followed by an interval of 15 days before the bonding of metal brackets. Shear bond strength testing was performed on a Kratos universal test machine at a speed of 0.5 mm/min. After the mechanical test, the specimens were assessed to determine the adhesive remnant index (ARI). The results were subjected to ANOVA, Tukey's test and Kruskal-Wallis test (5%). RESULTS: Significant differences were noted between the groups. Control group (G1 = 11.10 MPa) showed a statistically higher shear bond strength than the groups that underwent whitening (G2 = 5.40 Mpa, G3 = 3.73 MPa), which did not differ from each other. There were no significant differences between the groups in terms of ARI. CONCLUSION: Tooth whitening reduces the bond strength of metal brackets, whereas the presence of ACP in the whitening gel has no bearing on the results.
OBJETIVO: avaliar, in vitro, a influência do clareamento dentário com gel contendo fosfato de cálcio amorfo (ACP) na resistência da união adesiva de braquetes metálicos. MÉTODOS: trinta e seis dentes incisivos bovinos foram seccionados no limite coronorradicular e tiveram suas coroas incluídas em cilindros de PVC. Os corpos de prova foram divididos em três grupos (n = 12), de acordo com a realização do tratamento clareador e tipo de gel utilizado, sendo: G1 (controle) - sem clareamento; G2 - clareamento com gel sem ACP (Whiteness Perfect, FGM); G3 - clareamento com gel contendo ACP (Nite White ACP, Discus Dental). Os grupos G2 e G3 foram submetidos a 14 ciclos de clareamento, seguidos de intervalo de espera de 15 dias para a fixação adesiva dos braquetes metálicos. O ensaio mecânico de cisalhamento foi realizado em máquina universal Kratos, com velocidade de 0,5mm/min. Após o teste mecânico, os corpos de prova foram avaliados quanto ao índice de remanescente adesivo (ARI). Os resultados foram submetidos à ANOVA, ao teste de Tukey e ao de Kruskall-Wallis (α = 5%). RESULTADOS: diferenças significativas foram observadas entre os grupos testados. O grupo controle G1 (11,1MPa) mostrou uma resistência ao cisalhamento estatisticamente superior aos grupos submetidos ao clareamento (G2 = 5,40MPa; G3 = 3,73MPa), os quais não diferiram entre si. Não se observou diferença significativa para o ARI entre os grupos estudados. CONCLUSÃO: o clareamento dentário reduz a resistência da união adesiva de braquetes metálicos, enquanto a presença de ACP no gel clareador não influencia os resultados encontrados.
Subject(s)
Animals , Cattle , Calcium Phosphates/therapeutic use , Dental Bonding , Orthodontic Brackets , Tooth Bleaching Agents , Adhesiveness , Analysis of Variance , Dental Enamel , Dental Stress Analysis , Gels , Shear Strength , Statistics, NonparametricABSTRACT
Las posibilidades de remineralizar la mancha blanca fueron evaluadas en un estudio clínico que involucró el uso de barnices fluorados y una pasta a base de fosfato de calcio amorfo (FCA), complementada con el uso de una goma de mascar a base de FCA. En una población de niños asistidos en un hospital odontopediátrico, se evaluaron los protocolos establecidos para cada tratamiento comparativo, determinándose la validez del procedimiento con FCA como agente remineralizador.
Subject(s)
Humans , Male , Female , Child , Dental Care for Children/methods , Dental Caries/therapy , Dental Enamel , Calcium Phosphates/therapeutic use , Tooth Remineralization/instrumentation , Argentina , Cariostatic Agents , Chewing Gum , Clinical ProtocolsABSTRACT
Aim: To evaluate the remineralization potential of Amorphous Calcium Phosphate (ACP) and Fluoride containing pit and Fissure Sealants using Scanning Electron Microscopy. Materials and Methods: Thirty maxillary first premolars were divided into three groups of ten each and were randomly selected for ACP containing (Aegis- Opaque White, Bosworth Co. Ltd.), Fluoride containing (Teethmate F1 Natural Clear, Kuraray Co. Ltd.), resin based (Concise- Opaque White, 3M ESPE Co. Ltd.) pit and fissure sealant applications. The Concise group served as a control. The teeth weresubjected to the pH-cycling regimen for a period of two weeks. After two weeks, the teeth were sectioned bucco-lingually into 4mm sections and were observed under Scanning Electron Microscope at 50X, 250X, 500X, 1000X and 1500X magnifications. The qualitative changes at the tooth surface and sealant interface were examined and presence of white zone at the interface was considered positive for remineralization. Results: Both ACP containing (Aegis) and Fluoride containing (Teethmate F1) group showed white zone at the tooth surface-sealant interface. The resin based group (Concise) showed regular interface between the sealant and the tooth structure, but no clear cut white zone was observed. Conclusion: Both, Aegis and Teethmate F1 have the potential to remineralize. Release of Amorphous Calcium Phosphate molecules in Aegis group and formation of Fluoroapetite in Teethmate F1 group, were probably responsible for the remineralization.
Subject(s)
Bisphenol A-Glycidyl Methacrylate/therapeutic use , Calcium Phosphates/therapeutic use , Cariostatic Agents/therapeutic use , Dental Cements/therapeutic use , Dental Enamel/drug effects , Dental Enamel/ultrastructure , Fluorides/therapeutic use , Humans , Hydrogen-Ion Concentration , Materials Testing , Microscopy, Electron, Scanning , Pit and Fissure Sealants/therapeutic use , Saliva, Artificial/chemistry , Surface Properties , Time Factors , Tooth/drug effects , Tooth/ultrastructure , Tooth Demineralization/physiopathology , Tooth Remineralization/methodsABSTRACT
A presença do biofilme bacteriano é o principal fator etiológico envolvido na iniciação e no desenvolvimento das enfermidades que acometem a cavidade bucal. A remoção mecânica é um método capaz de controlar os patógenos periodontais. No entanto, muitos pacientes apresentam uma deficiência nos métodos de higiene diária habitual. Neste sentido, surgem agentes antimicrobianos capazes de agir de modo a auxiliar na prevenção e no tratamento destas doenças e diversos estudos na literatura têm mostrado a eficácia no emprego de tais substâncias antimicrobianas no controle do biofilme. Este artigo visou apresentar uma revisão da literatura sobre a utilização do agente antimicrobiano triclosan, possibilitando que os cirurgiões-dentistas conheçam melhor suas propriedades, seu mecanismo de ação e sua eficácia.
Subject(s)
Humans , Furcation Defects , Calcium Phosphates/therapeutic use , Gingival Recession , Guided Tissue Regeneration, Periodontal , Periodontal DiseasesABSTRACT
Because of its biocompatibility and osteoconductive properties, calcium-phosphate cement has been used as bone surrogate. OBJECTIVE: The purpose of this study was to do a histomorphometric comparison of bone regeneration using hydroxyapatite biphasic ceramic, calcium-phosphate cement and autogenous bone graft. STUDY DESIGN: Prospective and laboratorial experiment. MATERIALS AND METHODS: Two 5mm in diameter cavities (left and right - test and control) were made in the parietal bone of 72 rats. The GI, GII, GIII and GIV test cavities were filled with calcium-phosphate cement, biphasic ceramic hydroxyapatite, autogenous bone graft and blood. The animals were killed at 30, 60 and 90 days and the specimens underwent histomorphometric analysis. RESULTS: The results showed that autogenous bone graft treated defects had significantly more new bone at 30 days compared to other test groups. Within 60 and 90 days, bone formation was more significant in the test groups GI, GII and GIII; GI and GII encompassed larger areas. Throughout the evaluation periods, GII tests showed more bone formation when compared to GI. CONCLUSIONS: Biomaterials depicted a significantly increase in bone content, when compared to autogenous bone graft, concerning bone regeneration.
Os materiais de fosfato de cálcio, pelas características de biocompatibilidade e osteocondução, estão sendo estudados como substitutos ósseos. OBJETIVO: Comparar histomorfometricamente o reparo ósseo promovido pela cerâmica bifásica de hidroxiapatita, cimento fosfato de cálcio e enxerto ósseo autógeno. FORMA DE ESTUDO: Prospectivo e experimental em laboratório. MATERIAL E MÉTODO: Foram criadas duas cavidades (esquerda e direita - teste e controle) de 5mm de diâmetro nos ossos parietais de 72 ratos Wistar. As cavidades testes GI, GII, GIII e GIV foram preenchidas com cimento fosfato de cálcio, cerâmica bifásica de hidroxiapatita, enxerto ósseo autógeno e coágulo sanguíneo. Os animais foram sacrificados aos 30, 60 e 90 dias e os espécimes avaliados histomorfometricamente. RESULTADOS: Os resultados mostraram maior formação óssea no período de 30 dias para o GIII quando comparado aos outros grupos testes. Nos períodos de 60 e 90 dias, a neoformação óssea foi mais acentuada nos grupos testes GI, GII e GIII, alcançando maiores áreas em GI e GII. Em todos os períodos de avaliação, as cavidades testes GII apresentaram maiores áreas frente às GI. CONCLUSÃO: Os biomateriais foram superiores ao enxerto autógeno no reparo ósseo.
Subject(s)
Animals , Male , Rats , Bone Regeneration , Biocompatible Materials/therapeutic use , Bone Cements/therapeutic use , Bone Substitutes/therapeutic use , Calcium Phosphates/therapeutic use , Durapatite/therapeutic use , Bone Transplantation , Ceramics/therapeutic use , Prospective Studies , Parietal Bone/surgery , Rats, Wistar , Time FactorsABSTRACT
Aims: The purpose of the present study was to evaluate and compare the clinical outcome of infrabony defects following reconstructive surgery with the use of tricalcium phosphate (TCP) alone; TCP and citric acid (CA) root conditioning; and TCP, CA, and oxidized regenerated cellulose (ORC) membrane. Materials and Methods: Thirty-nine systemically healthy subjects with vertical infrabony defect were initially selected based on intraoral periapical radiographs and clinical examination to record probing pocket depth (PPD) and clinical attachment level (CAL). Only 21 defects revealed two-walled configuration on surgical debridement. These defects were selected and randomly allotted to the study groups. Group 1 defects were treated with TCP, group 2 with TCP+CA, and group 3 with TCP+CA+ORC. PPD, CAL, defect depth (DD), and level of alveolar crest (AC) were evaluated at the time of initial surgery and after 6 months at surgical re-entry. These measurements were utilized to calculate PPD reduction, CAL gain, defect fill (DF), %defect fill (%DF), and crestal resorption (CR). Statistical Analysis: A paired t-test was used for assessing changes in each group. Unpaired t-test was used for intergroup comparisons. Results: All three groups showed statistically significant PPD reduction, CAL gain, DF, and %DF, but insignificant CR at the end of 6 months. On intergroup comparison, no statistically significant differences were noted between the groups for all the parameters. Conclusion: Efficacy of combination techniques using TCP+CA; TCP+CA+ORC in treatment of periodontal infrabony defects is at least equal to that of TCP alone.
Subject(s)
Adult , Alveolar Bone Loss/therapy , Biocompatible Materials/therapeutic use , Bone Regeneration/drug effects , Bone Substitutes/therapeutic use , Calcium Phosphates/therapeutic use , Cellulose, Oxidized/therapeutic use , Citric Acid/therapeutic use , Combined Modality Therapy , Follow-Up Studies , Guided Tissue Regeneration, Periodontal/methods , Humans , Membranes, Artificial , Middle Aged , Osseointegration/drug effects , Periodontal Index , Tissue Conditioning, Dental/methods , Treatment Outcome , Young AdultABSTRACT
Purpose: To evaluate new bone formation, by the analysis of optical density, in rat femoral defects filled with calcium phosphate cement (CPC) and bioactive glass (BG). Methods: Twenty-one rats were divided into three groups, Group I (CPC), Group II (BG), and Group III (control), and assessed after 7, 15, and 30 days. Three bone cavities were made in the left femur and filled with CPC, BG, and no material (control). Digital images were obtained and the results were subjected to statistical analysis of variance (ANOVA), complemented by the Friedman and Kruskal-Wallis nonparametric tests, with a significance level of 5 percent. Results: Regarding optical density, Group I showed statistical values significantly higher than Group III and also higher, although not statistically significant, than Group II, in all observation periods. When Groups II and III were compared, Group II showed higher optical density values, without statistically significant differences, in all periods. Conclusion: The biomaterials analyzed showed higher optical density in relation to the control group in all observation periods, calcium phosphate cement being the best option in the repair of bone defects, but without statistically significant differences in relation to bioactive glass.
Objetivo: Avaliar a neoformação óssea, por meio da análise de densidade óptica, em cavidades em ratos preenchidas com cimento de fosfato de cálcio (CFC) e vidro bioativo (VB). Métodos: Utilizou-se 21 ratos distribuídos em três grupos, sendo Grupo I (CFC), Grupo II (VB) e Grupo III (controle) avaliados em 07, 15 e 30 dias. Foram realizadas três cavidades, junto ao fêmur esquerdo e preenchidas com CFC, VB e sem material (controle). Realizaram-se radiografias digitais e os resultados foram submetidos à análise estatística de variância (ANOVA), complementada através dos testes não-paramétricos de Friedman e Kruskal-Wallis, com níveis de significância de 5 por cento. Resultados: Comparando a densidade óptica o Grupo I apresentou valores estatísticos significativamente maiores que o Grupo III, e também apresenta valores maiores, sem diferença estatística significativa, em todos os períodos, quando comparado ao Grupo II. Quando comparamos o Grupo II com o Grupo III, o Grupo II apresenta valores maiores de densidade óptica, sem diferença estatística significativa, em todos os períodos. Conclusão: Observou-se maior densidade óptica dos biomateriais em relação ao grupo controle em todos os períodos avaliados, sendo o cimento de fosfato de cálcio a melhor opção para restauração de cavidades ósseas, porém sem diferenças estatisticamente significantes em relação ao vidro bioativo.
Subject(s)
Animals , Male , Rats , Bone Cements/therapeutic use , Bone Regeneration/physiology , Bone Substitutes/therapeutic use , Calcium Phosphates/therapeutic use , Femur/injuries , Glass , Bone Density , Bone Cements/chemistry , Bone Substitutes/chemistry , Calcium Phosphates/chemistry , Femur , Glass/chemistry , Random Allocation , Rats, Wistar , Statistics, NonparametricABSTRACT
Background: Platelet-rich plasma (PRP) contains high levels of polypeptide growth factors that may enhance periodontal regeneration when combined with graft materials. Aim: The purpose of this study was to compare the efficacy of autologous PRP in combination with β-tricalcium phosphate (β-TCP) versus β-TCP alone in the treatment of human infrabony defects. Materials and Methods: Using a split-mouth design, 20 patients showing clinical evidence of almost identical bilateral infrabony defects were randomly selected. The right infrabony defects of the patient were designated as Group A and treated by the placement of β-TCP alone. The left infrabony defects of the same patient were designated as Group B and treated by the placement of PRP mixed with β-TCP. Clinical assessment of probing pocket depth and attachment level and radiographic evaluation of the defect depth were done preoperatively and at 12, 24 and 36 weeks postoperatively. The relative efficacy of two treatment modalities was evaluated using paired Student's t-test and the comparative evaluation between the two groups was done using independent Student's t-test. Results: Both the groups exhibited a highly significant reduction in probing pocket depth, gain in clinical attachment level and linear bone fill at the end of 36 weeks postoperatively. Comparative evaluation between the two study groups revealed a significant reduction in probing pocket depth (P = 0.036*), mean gain in clinical attachment level (P = 0.042*) and linear bone fill (P = 0.014*) in Group B as compared to Group A. Conclusions: Combination of PRP and β-TCP led to a significantly more favorable clinical and radiographic improvement in infrabony periodontal defects.
Subject(s)
Absorbable Implants , Adult , Alveolar Bone Loss/complications , Alveolar Bone Loss/diagnostic imaging , Alveolar Bone Loss/surgery , Biocompatible Materials/therapeutic use , Bone Regeneration/drug effects , Bone Substitutes/therapeutic use , Calcium Phosphates/therapeutic use , Drug Combinations , Female , Guided Tissue Regeneration, Periodontal/methods , Humans , Male , Middle Aged , Periodontal Diseases/complications , Periodontal Diseases/diagnostic imaging , Periodontal Diseases/surgery , Platelet-Rich Plasma , Treatment Outcome , Young AdultABSTRACT
Human adipose tissue-derived mesenchymal stem cell (hATMSC) have emerged as a potentially powerful tool for bone repair, but an appropriate evaluation system has not been established. The purpose of this study was to establish a preclinical assessment system to evaluate the efficacy and safety of cell therapies in a nude rat bone defect model. Segmental defects (5 mm) were created in the femoral diaphyses and transplanted with cell media (control), hydroxyapatite/tricalcium phosphate scaffolds (HA/TCP, Group I), hATMSCs (Group II), or three cell-loading density of hATMSC-loaded HA/TCP (Group III-V). Healing response was evaluated by serial radiography, micro-computed tomography and histology at 16 weeks. To address safety-concerns, we conducted a GLP-compliant toxicity study. Scanning electron microscopy studies showed that hATMSCs filled the pores/surfaces of scaffolds in a cell-loading density-dependent manner. We detected significant increases in bone formation in the hATMSC-loaded HA/TCP groups compared with other groups. The amount of new bone formation increased with increases in loaded cell number. In a toxicity study, no significant hATMSC-related changes were found in body weights, clinical signs, hematological/biochemical values, organ weights, or histopathological findings. In conclusion, hATMSCs loaded on HA/TCP enhance the repair of bone defects and was found to be safe under our preclinical efficacy/safety hybrid assessment system.