Impact of sinonasal anatomic changes after endoscopic anterior skull base surgery on nasal airflow and air conditioning: a computational fluid dynamics study / 中华耳鼻咽喉头颈外科杂志

Objective: To analyze the impact of the sinonasal anatomic changes after endonasal endoscopic anterior skull base surgery on the nasal airflow and heating and humidification by computational fluid dynamics (CFD), and to explore the correlation between the postoperative CFD parameters and the subjective symptoms of the patients. Methods: The clinical data in the Rhinology Department of the First Affiliated Hospital of Zhengzhou University from 2016 to 2021 were retrospectively analyzed. The patients received the endoscopic resection of the anterior skull base tumor were selected as the case group, and the adults whose CT scans had no sinonasal abnormalities were chosen as the control group. The CFD simulation was performed on the sinonasal models after reconstructed from the patients' sinus CT images during the post-surgical follow-up. All the patients were asked to complete the Empty Nose Syndrome 6-Item Questionnaire (ENS6Q) to assess the subjective symptoms. The comparison between two independent groups and the correlation analysis were carried out by using the Mann-Whitney U test and the Spearman correlation test in the SPSS 26.0 software. Results: Nineteen patients (including 8 males and 11 females, from 22 to 67 years old) in the case group and 2 patients (a male of 38 years old and a female of 45 years old) in the control group were enrolled in this study. After the anterior skull base surgery, the high-speed airflow moved to the upper part of the nasal cavity, and the lowest temperature shifted upwards on the choana. Comparing with the control group, the ratio of nasal mucosal surface area to nasal ventilation volume in the case group decreased [0.41 (0.40, 0.41) mm-1 vs 0.32 (0.30, 0.38) mm-1; Z=-2.04, P=0.041], the air flow in the upper and middle part of the nasal cavity increased [61.14 (59.78, 62.51)% vs 78.07 (76.22, 94.43)%; Z=-2.28, P=0.023], the nasal resistance decreased [0.024 (0.022, 0.026) Pa·s/ml vs 0.016 (0.009, 0.018) Pa·s/ml; Z=-2.29, P=0.022], the lowest temperature in the middle of the nasal cavity decreased [28.29 (27.23, 29.35)℃ vs 25.06 (24.07, 25.50)℃; Z=-2.28, P=0.023], the nasal heating efficiency decreased [98.74 (97.95, 99.52)% vs 82.16 (80.24, 86.91)%; Z=-2.28, P=0.023], the lowest relative humidity decreased [(79.62 (76.55, 82.69)% vs 73.28 (71.27, 75.05)%; Z=-2.28, P=0.023], and the nasal humidification efficiency decreased [99.50 (97.69, 101.30)% vs 86.09 (79.33, 87.16)%; Z=-2.28, P=0.023]. The ENS6Q total scores of all patients in the case group were less than 11 points. There was a moderate negative correlation between the proportion of the inferior airflow in the post-surgical nasal cavity negatively and the ENS6Q total scores (rs=-0.50, P=0.029). Conclusions: The sinonasal anatomic changes after the endoscopic anterior skull base surgery alter the nasal airflow patterns, reducing the efficiency of nasal heating and humidification. However, the post-surgical occurrence tendency of the empty nose syndrome is weak.

Effect of nasal swell body on nasal airflow and Artemisia pollen deposition / 临床耳鼻咽喉头颈外科杂志

Objective:The nasal swell body（NSB） consists of the nasal septal cartilage, nasal bone, and swollen soft tissue, all of which are visible during endoscopic and imaging examinations. Although the function of the NSB remains uncertain, there is evidence to suggest that it plays a vital role in regulating nasal airflow and filtering inhaled air. Based on anatomical and histological evidence, it is hypothesized that the NSB is indispensable in these processes. This study aims to investigate the impact of NSB on nasal aerodynamics and the deposition of allergen particles under physiological conditions. Methods:The three-dimensional （3D） nasal models were reconstructed from computed tomography （CT） scans of the paranasal sinus and nasal cavity in 30 healthy adult volunteers from Northwest China, providing basis for the construction of models without NSB following virtual NSB-removal surgery. To analyze the distribution of airflow in the nasal cavity, nasal resistance, heating and humidification efficiency, and pollen particle deposition rate at various anatomical sites, we employed the computed fluid dynamics（CFD） method for numerical simulation and quantitative analysis. In addition, we created fully transparent segmented nasal cavity models through 3D printing, which were used to conduct bionic experiments to measure nasal resistance and allergen particle deposition. Results:①The average width and length of the NSB in healthy adults in Northwest China were （12.85±1.74） mm and （28.30±1.92） mm, respectively. ②After NSB removal, there was no significant change in total nasal resistance, and cross-sectional airflow velocity remained essentially unaltered except for a decrease in topical airflow velocity in the NSB plane. ③There was no discernible difference in the nasal heating and humidification function following the removal of the NSB; ④After NSB removal, the deposition fraction（DF） of Artemisia pollen in the nasal septum decreased, and the DFs post-and pre-NSB removal were（22.79±6.61）% vs （30.70±12.27）%, respectively; the DF in the lower airway increased, and the DFs post-and pre-NSB removal were（24.12±6.59）% vs （17.00±5.57）%, respectively. Conclusion:This study is the first to explore the effects of NSB on nasal airflow, heating and humidification, and allergen particle deposition in a healthy population. After NSB removal from the healthy nasal cavities: ①nasal airflow distribution was mildly altered while nasal resistance showed no significantly changed; ②nasal heating and humidification were not significantly changed; ③the nasal septum's ability to filter out Artemisia pollen was diminished, which could lead to increased deposition of Artemisia pollen in the lower airway.

Fluidodinâmica Computacional na Avaliação do Risco Futuro de Aneurismas de Aorta Ascendente / Computational Fluid Dynamics to Assess the Future Risk of Ascending Aortic Aneurysms

Resumo Fundamentos Uma metodologia para identificação de pacientes portadores de aneurisma de aorta ascendente (AAAs) sob alto risco de remodelamento aórtico não está completamente definida. Objetivo Esta pesquisa objetiva caracterizar numericamente o fluxo sanguíneo aórtico, relacionando a distribuição do estresse mecânico resultante com o crescimento de AAAs. Métodos Estudo analítico, observacional, unicêntrico, em que um protocolo de fluidodinâmica computacional (CFD - Computacional Fluid Dynamics) foi aplicado a imagens de angiotomografia computadorizada (ATC) de aorta de pacientes portadores de AAAs. Duas ATC de aorta com pelo menos um ano de intervalo foram obtidas. Dados clínicos dos pacientes foram registrados e, a partir das imagens de ATC, foram gerados modelos tridimensionais. Foram realizados estudos do campo de velocidade e estruturas coerentes (vórtices) com o objetivo de relacioná-los ao crescimento ou não do aneurisma e, posteriormente, compará-los com os dados clínicos dos pacientes. O teste de Kolmogorov-Smirnov foi utilizado para avaliar a normalidade da amostra e o teste não-paramétrico Wilcoxon signed-rank foi aplicado para comparações de dados pareados entre os ângulos aórticos. A significância estatística foi fixada em 5%. Resultados Para o grupo que apresentou crescimento do aneurisma, a incidência do jato na parede aórtica gerou áreas de recirculação posterior ao jato, induzindo à formação de vórtices complexos, ocasionando um incremento na pressão média no endotélio aórtico. O grupo sem crescimento do aneurisma apresentou diminuição na pressão média. Conclusão Este estudo piloto mostrou que a CFD baseada em ATC pode, em um futuro próximo, ser uma ferramenta auxiliar na identificação dos padrões de fluxo associados ao processo de remodelamento de AAAs.

Abstract Background A methodology to identify patients with ascending aortic aneurysm (AsAA) under high risk for aortic growth is not completely defined Objetive This research seeks to numerically characterize the aortic blood flow by relating the resulting mechanical stress distribution with AsAA growth. Methods Analytical, observational, single-center study in which a computational fluid dynamics (CFD) protocol was applied to aortic computed tomography angiogram (CTA) images of patients with AsAA. Two CTA exams taken at a minimum interval of one year were obtained. From the CTA-gathered images, three-dimensional models were built, and clinical data were registered. Study of velocity field and coherent structures (vortices) was performed aiming to relate them to the presence or absence of aneurysm growth, as well as comparing them to the patients' clinical data. The Kolmogorov-Smirnov test was used to evaluate the normality of the distribution, and the non-parametric Wilcoxon signed-rank test, for non-normal distribution, was used to compare the paired data of the aortic angles. Statistical significance was set at 5%. Results The incident jet in the aortic wall generated recirculation areas in the posterior region of the jet, inducing complex vortices formation in the group with aneurysm growth, leading to an average pressure increase in the ascending aortic wall between exams. In the group without aneurysm growth, the average pressure decreased. Conclusion This pilot study showed that CFD based on CTA may in the near future be a tool to help identify flow patterns associated with AsAA remodeling process.

Mitral valve-in-valve: defining the indication limits by in vitro hydrodynamic tests in a brazilian transcatheter prosthesis

Abstract Introduction: Reoperations in cardiac surgery represent a clinical challenge, particularly because of the higher rate of perioperative morbidity and mortality. Mitral valve reoperation owing to bioprosthesis dysfunction, transcatheter treatment with a prosthesis implantation over the prosthesis has emerged as an alternative, especially for patients with a previous approach. In this study, we analyzed the hydrodynamic behavior of transcatheter prosthesis implantation in conventional mitral bioprostheses through hydrodynamic tests and produced a recommendation for the size of transcatheter valve most adequate for valve-in-valve procedure. Methods: Mitral bioprostheses were attached to a flow duplicator and different combinations of transcatheter prostheses were implanted inside. The equipment simulates the hydrodynamic behavior of the valves submitted in vitro and determines transvalvular pressures and flow parameters. Results: All tests could be performed. Better hydrodynamic performance occurred for transcatheter prostheses 1 mm smaller than bioprostheses, except for the 27-mm bioprostheses. Effective valve areas (cm²) and transvalvular gradients (mmHg) were, respectively: Bioprosthesis × Inovare: 27 × 28 mm: 1.65 and 5.95/29 × 28 mm and 31 × 30 mm: 2.15 and 3.6. Conclusion: The mitral valve-in-valve implantation proved to be feasible in vitro. The use of 27-mm bioprostheses should be judicious, with preference for a 26-mm transcatheter valve. In the 29 and 31-mm bioprostheses, the implantation was very satisfactory, with good effective valve areas and transvalvular gradients, with preference for smaller transcatheter valves.

New opportunities and challenges for hybrid data and model driven bioprocess optimization and scale-up / 生物工程学报

Currently, biomanufacturing technology and industry are receiving worldwide attention. However, there are still great challenges on bioprocess optimization and scale-up, including: lacing the process detection methods, which makes it difficult to meet the requirement of monitoring of key indicators and parameters; poor understanding of cell metabolism, which arouses problems to rationally achieve process optimization and regulation; the reactor environment is very different across the scales, resulting in low efficiency of stepwise scale-up. Considering the above key issues that need to be resolved, here we summarize the key technological innovations of the whole chain of fermentation process, i.e., real-time detection-dynamic regulation-rational scale-up, through case analysis. In the future, bioprocess design will be guided by a full lifecycle in-silico model integrating cellular physiology (spatiotemporal multiscale metabolic models) and fluid dynamics (CFD models). This will promote computer-aided design and development, accelerate the realization of large-scale intelligent production and serve to open a new era of green biomanufacturing.

Clinical performance of fixed-pressure Sphera Duo® hydrocephalus shunt / Performance clínica da válvula de pressão fixa Sphera Duo®

Abstract Introduction: Cerebral hydrodynamics complications in shunted patients are due to the malfunction of the system. The objective of this retrospective, single-center, single-arm cohort study is to confirm the safety and performance of Sphera® Duo when used in adult patients suffering from hydrocephalus, pseudotumor cerebri or arachnoid cysts. Methods: Data were generated by reviewing 112 adult patient's charts, who were submitted to a ventriculoperitoneal shunt surgery and followed for one year after surgery. Results: The results show us that 76% of patients had their neurological symptoms improved and that the reoperation rate was 15% in the first year following surgery. Discussion: Sphera Duo® shunt system is an applicable shunt option in routine neurosurgical management of hydrocephalus by several causes. It has presented good results while mitigating effects of overdrainage. Overdrainage is especially important in adults with non-hypertensive hydrocephalus and can cause functional shunt failure, which causes subnormal ICP (particularly in the upright position) and is associated with characteristic neurological symptoms, such as postural headache and nausea. Conclusion: Sphera Duo® shunt system is safe when used in adult patients suffering from hydrocephalus, pseudotumor cerebri or arachnoid cyst.

Resumo Introdução: As complicações da hidrodinâmica cerebral em pacientes com derivação ventriculoperitoneal são frequentemente relacionadas ao malfuncionamento do sistema. O objetivo deste estudo retrospectivo de coorte de centro único é avaliar a segurança e performance clínica do Sistema Sphera® Duo quando utilizado em adultos com hidrocefalia, pseudotumor cerebral ou cistos aracnoides. Métodos: Avaliamos os prontuários de 112 pacientes adultos submetidos a cirurgia de derivação ventriculoperitoneal e acompanhados por 1 ano após a cirurgia. Resultados: O resultado mostra que 76% dos pacientes melhoraram dos sintomas neurológicos e a taxa de reoperação foi de 15% no primeiro ano após a cirurgia. Discussão: O sistema de derivação Sphera Duo® é uma opção de shunt adequada a ser usada no tratamento neurocirúrgico da hidrocefalia por causas diversas. Ele demonstrou bons resultados clínicos enquanto reduziu riscos de hiperdrenagem. A hiperdrenagem é especialmente preocupante e mórbida em pacientes adultos com hidrocefalia não hipertensiva e pode levar a prejuízo clínico e disfunção da válvula, com sintomas de hipotensão craniana, como cefaléia ortostática e náuseas. Conclusão: O sistema de derivação Sphera Duo® é seguro para tratamento da hidrocefalia, pseudotumor cerebri ou cistos aracnóides em adultos.

Future Directions in Coronary CT Angiography: CT-Fractional Flow Reserve, Plaque Vulnerability, and Quantitative Plaque Assessment

Coronary computed tomography angiography (CCTA) is a well-validated and noninvasive imaging modality for the assessment of coronary artery disease (CAD) in patients with stable ischemic heart disease and acute coronary syndromes (ACSs). CCTA not only delineates the anatomy of the heart and coronary arteries in detail, but also allows for intra- and extraluminal imaging of coronary arteries. Emerging technologies have promoted new CCTA applications, resulting in a comprehensive assessment of coronary plaques and their clinical significance. The application of computational fluid dynamics to CCTA resulted in a robust tool for noninvasive assessment of coronary blood flow hemodynamics and determination of hemodynamically significant stenosis. Detailed evaluation of plaque morphology and identification of high-risk plaque features by CCTA have been confirmed as predictors of future outcomes, identifying patients at risk for ACSs. With quantitative coronary plaque assessment, the progression of the CAD or the response to therapy could be monitored by CCTA. The aim of this article is to review the future directions of emerging applications in CCTA, such as computed tomography (CT)-fractional flow reserve, imaging of vulnerable plaque features, and quantitative plaque imaging. We will also briefly discuss novel methods appearing in the coronary imaging scenario, such as machine learning, radiomics, and spectral CT.

Patient-Specific Computational Fluid Dynamics in Ruptured Posterior Communicating Aneurysms Using Measured Non-Newtonian Viscosity : A Preliminary Study

OBJECTIVE: The objective of this study was to analyze patient-specific blood flow in ruptured aneurysms using obtained non-Newtonian viscosity and to observe associated hemodynamic features and morphological effects.METHODS: Five patients with acute subarachnoid hemorrhage caused by ruptured posterior communicating artery aneurysms were included in the study. Patients’ blood samples were measured immediately after enrollment. Computational fluid dynamics (CFD) was conducted to evaluate viscosity distributions and wall shear stress (WSS) distributions using a patient-specific geometric model and shear-thinning viscosity properties.RESULTS: Substantial viscosity change was found at the dome of the aneurysms studied when applying non-Newtonian blood viscosity measured at peak-systole and end-diastole. The maximal WSS of the non-Newtonian model on an aneurysm at peaksystole was approximately 16% lower compared to Newtonian fluid, and most of the hemodynamic features of Newtonian flow at the aneurysms were higher, except for minimal WSS value. However, the differences between the Newtonian and non-Newtonian flow were not statistically significant. Rupture point of an aneurysm showed low WSS regardless of Newtonian or non-Newtonian CFD analyses.CONCLUSION: By using measured non-Newtonian viscosity and geometry on patient-specific CFD analysis, morphologic differences in hemodynamic features, such as changes in whole blood viscosity and WSS, were observed. Therefore, measured non-Newtonian viscosity might be possibly useful to obtain patient-specific hemodynamic and morphologic result.

Understanding Vulnerable Plaques: Current Status and Future Directions

The main cause of acute myocardial infarction is plaque rupture accompanied by superimposed coronary thrombosis. Thin-cap fibroatheromas (TCFAs) have been suggested as a type of lesion with a vulnerability that can cause plaque rupture. However, not only the existence of a TCFA but also the fine and complex interactions of other anatomical and hemodynamic factors, such as microcalcification in the fibrous cap, cholesterol crystal-induced inflammasome activation, the apoptosis of intraplaque macrophages, and endothelial shear stress distribution should precede a clinical event caused by plaque rupture. Recent studies are being conducted to identify these mechanisms through molecular imaging and hemodynamic assessment using computational fluid dynamics, which will result in better clinical results through selective coronary interventions.

Fluid Dynamics of Small Diameter Tubes Used in Membrane-tube Type Glaucoma Shunt Devices

PURPOSE: To investigate the outflow characteristics of silicone tubes with intraluminal stents used in membrane-tube (MT) type glaucoma shunt devices. METHODS: The silicone tubes used in MicroMT (internal diameter of 100 µm with a 7-0 nylon intraluminal stent) and Finetube MT (internal diameter of 200 µm with a 5-0 nylon intraluminal stent) were connected to a syringe-pump that delivered a continuous flow of distilled water at flow rates of 2, 5, 10, and 25 µL/min. The pressures and resistances of tubes were measured at a steady flow rate with full-length, half-length, and absence of intraluminal stents. RESULTS: The mean outflow resistance of the two types of tubes ranged from 3.0 ± 1.9 to 3.8 ± 1.7 mmHg/µL/min with a full-length intraluminal stent, 1.8 ± 1.1 to 2.2 ± 1.1 mmHg/µL/min with a half-length intraluminal stent, and 0.1 ± 0.0 to 0.2 ± 0.0 mmHg/µL/min without an intraluminal stent. Theoretically, for a physiologic state with a flow rate of 2 µL/min and episcleral venous pressure of 6 mmHg, the mean pressures of tubes were expected to be 13.2 ± 3.0, 10.5 ± 2.4, and 6.4 ± 0.2 mmHg in MicroMT with full-length, half-length, and absence of intraluminal stents, respectively, and 12.5 ± 3.9, 9.6 ± 2.4, and 6.2 ± 0.2 mmHg in Finetube MT with full-length, half-length, and absence of intraluminal stents, respectively. The pressure variance also decreased with intraluminal stent retraction (p < 0.01). CONCLUSIONS: The small diameter tubes of 100 and 200 µm internal diameters, with 7-0 and 5-0 nylon intraluminal stents, respectively, used in the MT-type glaucoma shunt device showed safe and effective outflow characteristics.

Preparation and characterization of rutile phase TiO₂ nanoparticles and their cytocompatibility with oral cancer cells

In the present study, rutile phase titanium dioxide nanoparticles (R-TiO₂ NPs) were prepared by hydrolysis of titanium tetrachloride in an aqueous solution followed by calcination at 900℃. The composition of R-TiO₂ NPs was determined by the analysis of X-ray diffraction data, and the characteristic features of R-TiO₂ NPs such as the surface functional group, particle size, shape, surface topography, and morphological behavior were analyzed by Fourier-transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy, transmission electron microscopy, dynamic light scattering, and zeta potential measurements. The average size of the prepared R-TiO₂ NPs was 76 nm, the surface area was 19 m²/g, zeta potential was −20.8 mV, and average hydrodynamic diameter in dimethyl sulfoxide (DMSO)–H₂O solution was 550 nm. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and morphological observations revealed that R-TiO₂ NPs were cytocompatible with oral cancer cells, with no inhibition of cell growth and proliferation. This suggests the efficacy of R-TiO₂ NPs for the aesthetic white pigmentation of teeth.

Update on dentin hypersensitivity: with the focus on hydrodynamic theory and mechanosensitive ion channels

Dentin hypersensitivity is an abrupt intense pain caused by innocuous stimuli to exposed dentinal tubules. Mechanosensitive ion channels have been assessed in dental primary afferent neurons and odontoblasts to explain dentin hypersensitivity. Dentinal fluid dynamics evoked by various stimuli to exposed dentin cause mechanical stress to the structures underlying dentin. This review briefly discusses three hypotheses regarding dentin hypersensitivity and introduces recent findings on mechanosensitive ion channels expressed in the dental sensory system and discusses how the activation of these ion channels is involved in dentin hypersensitivity.

Patient-Specific Computational Fluid Dynamics in Ruptured Posterior Communicating Aneurysms Using Measured Non-Newtonian Viscosity : A Preliminary Study

OBJECTIVE: The objective of this study was to analyze patient-specific blood flow in ruptured aneurysms using obtained non-Newtonian viscosity and to observe associated hemodynamic features and morphological effects. METHODS: Five patients with acute subarachnoid hemorrhage caused by ruptured posterior communicating artery aneurysms were included in the study. Patients’ blood samples were measured immediately after enrollment. Computational fluid dynamics (CFD) was conducted to evaluate viscosity distributions and wall shear stress (WSS) distributions using a patient-specific geometric model and shear-thinning viscosity properties. RESULTS: Substantial viscosity change was found at the dome of the aneurysms studied when applying non-Newtonian blood viscosity measured at peak-systole and end-diastole. The maximal WSS of the non-Newtonian model on an aneurysm at peaksystole was approximately 16% lower compared to Newtonian fluid, and most of the hemodynamic features of Newtonian flow at the aneurysms were higher, except for minimal WSS value. However, the differences between the Newtonian and non-Newtonian flow were not statistically significant. Rupture point of an aneurysm showed low WSS regardless of Newtonian or non-Newtonian CFD analyses. CONCLUSION: By using measured non-Newtonian viscosity and geometry on patient-specific CFD analysis, morphologic differences in hemodynamic features, such as changes in whole blood viscosity and WSS, were observed. Therefore, measured non-Newtonian viscosity might be possibly useful to obtain patient-specific hemodynamic and morphologic result.

Mouse models for hepatitis B virus research / 한국실험동물학회지

Hepatitis B virus (HBV) infection remains a major global health problem; indeed, there are 250 million carriers worldwide. The host range of HBV is narrow; therefore, few primates are susceptible to HBV infection. However, ethical constraints, high cost, and large size limit the use of primates as suitable animal models. Thus, in vivo testing of therapies that target HBV has been hampered by the lack of an appropriate in vivo research model. To address this, mouse model systems of HBV are being developed and several are used for studying HBV in vivo. In this review, we summarize the currently available mouse models, including HBV transgenic mice, hydrodynamic injection-mediated HBV replicon delivery systems, adeno-associated virus-mediated HBV replicon delivery systems, and human liver chimeric mouse models. These developed (or being developed) mouse model systems are promising and should be useful tools for studying HBV.

Wall Shear Stress and Flow Patterns in Unruptured and Ruptured Anterior Communicating Artery Aneurysms Using Computational Fluid Dynamics

OBJECTIVE: The goal of this study was to compare several parameters, including wall shear stress (WSS) and flow pattern, between unruptured and ruptured anterior communicating artery (ACoA) aneurysms using patient-specific aneurysm geometry.METHODS: In total, 18 unruptured and 24 ruptured aneurysms were analyzed using computational fluid dynamics (CFD) models. Minimal, average, and maximal wall shear stress were calculated based on CFD simulations. Aneurysm height, ostium diameter, aspect ratio, and area of aneurysm were measured. Aneurysms were classified according to flow complexity (simple or complex) and inflow jet (concentrated or diffused). Statistical analyses were performed to ascertain differences between the aneurysm groups.RESULTS: Average wall shear stress of the ruptured group was greater than that of the unruptured group (9.42% for aneurysm and 10.38% for ostium). The average area of ruptured aneurysms was 31.22% larger than unruptured aneurysms. Simple flow was observed in 14 of 18 (78%) unruptured aneurysms, while all ruptured aneurysms had complex flow (p < 0.001). Ruptured aneurysms were more likely to have a concentrated inflow jet (63%), while unruptured aneurysms predominantly had a diffused inflow jet (83%, p=0.004).CONCLUSION: Ruptured aneurysms tended to have a larger geometric size and greater WSS compared to unruptured aneurysms, but the difference was not statistically significant. Flow complexity and inflow jet were significantly different between unruptured and ruptured ACoA aneurysms.

Effect of Blood Donation on the Donor's Hemorheological Properties / 대한수혈학회지

The circulatory system is closely related to the inter-relationship between the anatomy of the heart and blood vessels, and the fluid dynamic properties of blood. The physical properties of blood, which affect blood flow, are called hemorheologic factors. Hemorheologic factors, such as blood viscosity and erythrocyte aggregation, are influenced mainly by hematocrit. A higher hematocrit level results in an increase in blood viscosity, erythrocyte aggregation, which impedes the circulation itself, and tissue oxygenation. An excess of serum ferritin causes injury to vascular endothelial cells and erythrocytes via oxygen free radicals. In addition, an excess of blood can aggravatee the adverse effects of the hemorheologic parameters and induce atherogenesis, microcirculatory disturbances, and major cardiovascular events. A preventive and therapeutic approach with a phlebotomy or blood donation has been stimulated by the knowledge that blood loss, such as regular donations, is associated with significant decreases in key hemorheologic variables, including blood viscosity, erythrocyte aggregation, hematocrit, and fibrinogen. Major cardiovascular events have been improved in regular blood donors by improving blood flow and microcirculation by decreasing the level of oxidative stress, improving the hemorheologic parameters, and reducing the serum ferritin level. Confirmation of the positive preventive and therapeutic effects of blood donations on cardiovascular disease by a well-designed and well-controlled Cohort study may be good news to patients with cardiovascular disease or at risk of these diseases, as well as patients who require a transfusion.

Wall Shear Stress and Flow Patterns in Unruptured and Ruptured Anterior Communicating Artery Aneurysms Using Computational Fluid Dynamics

OBJECTIVE: The goal of this study was to compare several parameters, including wall shear stress (WSS) and flow pattern, between unruptured and ruptured anterior communicating artery (ACoA) aneurysms using patient-specific aneurysm geometry. METHODS: In total, 18 unruptured and 24 ruptured aneurysms were analyzed using computational fluid dynamics (CFD) models. Minimal, average, and maximal wall shear stress were calculated based on CFD simulations. Aneurysm height, ostium diameter, aspect ratio, and area of aneurysm were measured. Aneurysms were classified according to flow complexity (simple or complex) and inflow jet (concentrated or diffused). Statistical analyses were performed to ascertain differences between the aneurysm groups. RESULTS: Average wall shear stress of the ruptured group was greater than that of the unruptured group (9.42% for aneurysm and 10.38% for ostium). The average area of ruptured aneurysms was 31.22% larger than unruptured aneurysms. Simple flow was observed in 14 of 18 (78%) unruptured aneurysms, while all ruptured aneurysms had complex flow (p < 0.001). Ruptured aneurysms were more likely to have a concentrated inflow jet (63%), while unruptured aneurysms predominantly had a diffused inflow jet (83%, p=0.004). CONCLUSION: Ruptured aneurysms tended to have a larger geometric size and greater WSS compared to unruptured aneurysms, but the difference was not statistically significant. Flow complexity and inflow jet were significantly different between unruptured and ruptured ACoA aneurysms.

Simulation and Damage Analysis of an Accidental Jet Fire in a High-Pressure Compressed Pump Shelter

BACKGROUND: As one of the most frequently occurring accidents in a chemical plant, a fire accident may occur at any place where transfer or handling of combustible materials is routinely performed. METHODS: In particular, a jet fire incident in a chemical plant operated under high pressure may bring severe damage. To review this event numerically, Computational Fluid Dynamics methodology was used to simulate a jet fire at a pipe of a compressor under high pressure. RESULTS: For jet fire simulation, the Kemeleon FireEx Code was used, and results of this simulation showed that a structure and installations located within the shelter of a compressor received serious damage. CONCLUSION: The results confirmed that a jet fire may create a domino effect that could cause an accident aside from the secondary chemical accident.