Exploring the innovative talents training mode in new era / 生物工程学报

Innovation is an important way to promote economic development and social progress. Recent years have seen rapid development of biological sciences. In response to social demands and the needs for developing an innovative country, fostering innovative talents in the field of biosciences has become a significant initiative supported by national policies and the needs from talent market. Taking the innovative talent training mode implemented by Zhejiang Normal University in the field of biological sciences as an example, this paper comprehensively introduces several key aspects of the mode. This includes establishing a mentorship system as the foundation, carrying out curriculum reform through project competitions and practical platforms, and promoting synergy among industry, academia, and research in talent training. This training mode has achieved positive results in practice, promoting the training of outstanding innovative talents in biological science majors, and may facilitate the reform of talent training in similar majors.

Psychosocial Risks and Mental Disorders among Mexican Oil Workers / Riesgos psicosociales y trastornos mentales en trabajadores petroleros mexicanos / Riscos psicossociais e transtornos mentais em trabalhadores petrolíferos mexicanos

The psychosocial risks faced by workers can influence their health as well as job performance and satisfaction. However, this phenomenon among Mexican workers in the oil industry has not been well studied. The purpose of this study was to analyze the association of stress and job-related burnout with mental disorders among oil workers in the southeastern region of Mexico. Materials and methods: This cross-sectional and analytical study included 501 workers from the onshore oil industry in the southeastern region of Mexico. The Work Burnout Inventory, the Symptoms of Stress Inventory, and the Goldberg General Health Questionnaire (ghq 28) were applied between October and November, 2016. Chi-square test was used to analyze the relationship between variables and the odds ratio was determined to establish the level of risk for mental disorders. Results: Moderate levels of stress (21.4l %), efficacy (41.5 %), cynicism (30.6 %), and exhaustion (39.7 %) were observed. Mental disorders were noted in 11.8 % of workers. Stress and burnout were associated with mental disorders (p < 0.05). Finally, workers who experienced stress and job burnout were more likely to have mental disorders (or = 12.96; 95 % ci [7.03­23.94]; p = 0.00). Conclusions:Stress and job burnout are risk factors for mental disorders among Mexican oil workers.

los riesgos psicosociales en los trabajadores tienen influencia en la salud, rendimiento del trabajo y satisfacción laboral; sin embargo, poco se ha estudiado este fenómeno en los trabajadores mexicanos de la industria petrolera. El objetivo fue analizar la asociación entre estrés y desgaste laboral y trastornos en los trabajadores de la industria petrolera terrestre de la región sureste de México. Materiales y métodos: diseño transversal y analítico. La muestra estuvo integrada por 501 trabajadores. Los instrumentos utilizados fueron el Inventario de Desgaste Laboral, el Inventario de Síntomas de Estrés y el Cuestionario de Salud General de Goldberg (ghq 28). Se aplicaron los instrumentos entre octu-bre y noviembre de 2016. Se utilizó la prueba de chi cuadrado para analizar la relación entre las variables, y se determinaron odds ratio para establecer el nivel de riesgo a trastornos mentales. Resultados: se encontraron niveles moderados de estrés (21.4l %), eficacia (41.5 %), cinismo (30.6 %) y agotamiento (39.7 %). Se encontró presencia de trastornos mentales en el 11.8 % de los trabajadores. El estrés y las dimensiones del desgaste laboral se asociaron con los trastornos mentales (p < 0.05). Finalmente, los tra-bajadores que presentaron estrés y desgaste laboral tuvieron mayor probabilidad de sufrir trastornos mentales (or= 12.96; ic 95 % [7.03-23.94]; p = 0.00). Conclusiones: el estrés y el desgaste laboral representan factores de riesgo para presentar trastornos mentales en los trabajadores petroleros mexicanos.

os riscos psicossociais nos trabalhadores influenciam a saúde, o desempenho no trabalho e a satisfação no trabalho, no entanto, esse fenômeno tem sido pouco estudado em trabalhadores mexi-canos da indústria petrolífera. O objetivo do estudo foi analisar a associação do estresse e desgaste no trabalho com transtornos em trabalhadores da indústria petrolífera terrestre da região sudeste do México. Materiais e métodos: desenho transversal e analítico. A amostra foi composta por 501 trabalha-dores. Os instrumentos utilizados foram o Inventário de Desgaste Laboral, o Inventário de Sintomas de Estresse e o Questionário de Saúde Geral de Goldberg (ghq 28). Os instrumentos foram aplicados entre outubro e novembro de 2016. O teste qui-quadrado foi utilizado para analisar a relação entre as variáveis e o odds ratio foi determinado para estabelecer o nível de risco para transtornos mentais. Resultados: foram encontrados níveis moderados de estresse (21,4l %), eficácia (41,5 %), cinismo (30,6 %) e exaustão (39,7 %). A presença de transtornos mentais foi encontrada em 11,8 % dos trabalhadores. O estresse e as dimensões de desgaste laboral foram associadas aos transtornos mentais (p < 0,05). Por fim, os trabalhadores que apresentavam estresse e desgaste laboral apresentaram maior probabilidade de apresentar transtornos mentais (or = 12,96; ic 95 % [7,03-23,94]; p = 0,00). Conclusões: o estresse e desgaste laboral representam fatores de risco para o desenvolvimento de transtornos mentais em trabalhadores petrolíferos mexicanos.

Medical Institution's Multiple Role in the Collaborative Innovation Transformation Mode of "Industry-University-Research-Medicine" on Domestic Surgical Robots / 中国医疗器械杂志

In recent years, with the rapid development of Chinese domestic surgical robot technology and the expansion of the application market, the "industry-university-research-medicine" collaborative innovation transformation mode has gradually developed and formed. Medical institutions play an important role in multi-party cooperation with enterprises, universities, and research institutes, as well as in product planning, technology research and development, achievement transformation, and personnel training. On the basis of reviewing the current situation of the development of the "industry-university-research-medicine" collaborative innovation transformation mode of domestic surgical robots, this study explores the multiple roles played by medical institutions in this mode and challenges, further putting forward corresponding recommendations.

Fostering talents in biotechnology major through the university-enterprise collaborative training mode / 生物工程学报

With the high-quality development of biotechnology-related industries in China, the demand for talents and training quality in this field have received extensive attention. Several universities in Nanjing have conducted in-depth analysis on the shortcomings of talent training that does not closely match the needs of industries and enterprises. These universities have since effectively leveraged its professional characteristics, deepened university-enterprise cooperation, and encouraged the alignment of professional development with industrial growth. Biotechnology major has always focused on nurturing individuals with "right conduct, good learning, and strong ability", and capitalized on its comparative disciplinary advantages. These universities vigorously promoted and continuously optimized the model of university-enterprise collaborative training, highlighted the integration of science, industry and education, focused on innovative education teaching methods, as well as practical engineering practice to enhance its quality. The preliminary training results show that this model has promoted students' engineering practical abilities and comprehensive qualities, garnering recognition from employers and students alike.

Biomanufacturing of bioactive compounds: current situation, challenges, and future perspectives / 生物工程学报

Biomanufacturing uses biological systems, including cells, microorganisms, and enzymes, to produce natural or synthetic molecules with biological activities for use in various industries, such as pharmaceuticals, cosmetics, and agriculture. These bioactive compounds are expected to play important roles in improving the quality of life and prolonging its length. Fortunately, recent advances in synthetic biology and automation technologies have accelerated the development of biomanufacturing, enabling us to create new products and replace conventional methods in a more sustainable manner. As of now, the role of biomanufacturing in the growth and innovation of bioeconomy is steadily increasing, and this techbology becomes a prevalent technology in global markets. To gain a comprehensive understanding of this field, this article presents a retrospective review of Bloomage Biotechnology's Research and Development and briefly reviews the developments of biomanufacturing and offers insights into the futre prospects. In conclusion, biomanufacturing will continue to be an important, environmentally friendly, and sustainable production mode in the ongoing development of bioeconomy.

Advances in enzymatic production of L-homophenylalanine / 生物工程学报

L-homophenylalanine (L-HPA) is an important non-natural amino acid that has been used as a key intermediate for the synthesis of Puli drugs for the treatment of hypertension. At present, L-HPA is synthesized using chemical methods, which has the disadvantages of expensive raw materials, tedious steps and serious pollution. Therefore, researchers have conducted in-depth research on the enzymatic production of L-HPA. This review summarizes the research progress on the enzymatic synthesis of L-HPA, including the dehydrogenase process, the transaminase process, the hydantoinase process, and the decarboxylase process, with the hope to facilitate the industrial production of L-HPA.

Overview of Chinese medicinal materials industry in 2021 and development suggestions / 中国中药杂志

This paper introduced the overview of the "eight trends" of Chinese medicinal materials(CMM) industry in 2021, analyzed the problems of CMM production, and put forward development suggestions. Specifically, "eight trends" could be summarized as follows.(1) The growing area of CMM tended to be stable, and some provinces began to release the local catalog of Dao-di herbs.(2) The protection process of new varieties accelerated, and a number of excellent varieties were bred.(3) The theory of ecological cultivation was further enriched, and the demonstration effect of ecological cultivation technology was prominent.(4) Some CMM realized complete mechanization and formed typical model cases.(5) The number of cultivation bases using the traceability platform increased, and provincial internet trading platforms were set up.(6) The construction of CMM industrial clusters accelerated, and the number of provincial-level regional brands increased rapidly.(7) Many new agricultural business entities were founded nationwide, and a variety of methods were used to drive the intensified development of CMM.(8) A number of local TCM laws were promulgated, and the management regulation of food and medicine homology substances catalogs was issued. On this basis, four suggestions for CMM production were proposed.(1) It is suggested to speed up the formulation of the national catalog of Dao-di herbs and carry out the certification of Dao-di herbs production bases.(2) Ecological planting of forest and grassland medicine should be further strengthened in terms of technical research and promotion based on the principle of ecological priority.(3) The basic work of disaster prevention should be paid more attention and technical measures for disaster mitigation should be developed.(4) The planted area of commonly used CMM should be incorporated into the national regular statistical system.

Adaptive evolution of microorganisms based on industrial environmental perturbations / 生物工程学报

The development of synthetic biology has greatly promoted the construction of microbial cell factories, providing an important strategy for green and efficient chemical production. However, the bottleneck of poor tolerance to harsh industrial environments has become the key factor hampering the productivity of microbial cells. Adaptive evolution is an important method to domesticate microorganisms for a certain period by applying targeted selection pressure to obtain desired phenotypic or physiological properties that are adapted to a specific environment. Recently, with the development of technologies such as microfluidics, biosensors, and omics analysis, adaptive evolution has laid the foundation for efficient productivity of microbial cell factories. Herein, we discuss the key technologies of adaptive evolution and their important applications in improvement of environmental tolerance and production efficiency of microbial cell factories. Moreover, we looked forward to the prospects of adaptive evolution to realize industrial production by microbial cell factories.

Explored the Function of Electromagnetic Compatibility (EMC) of Medical Devices from the Perspective of Test / 中国医疗器械杂志

OBJECTIVE@#To improve the electromagnetic compatibility (EMC) quality of medical devices, improve the efficiency of EMC testing, and promote the speed of market approval.@*METHODS@#The unqualified cases of EMC test items of medical devices in recent years were statistically analyzed, and the reasons of low EMC quality of medical devices were analyzed from the perspective of test.@*RESULTS@#Based on the analysis of the reasons, the suggestions were given from the perspectives of medical device manufacturers and testing organizations.@*CONCLUSIONS@#In order to ensure the quality of EMC of medical devices, medical device manufacturers, regulatory authorities and inspection and testing institutions should strengthen the monitoring and evaluation of medical device electromagnetic compatibility, to ensure the safety of products work together to promote the development of the medical device industry healthily and orderly.

Analysis and Reflection on Drafting Units of Medical Device Industry Standards in China / 中国医疗器械杂志

Standard drafting is an important part in the process of standard formulation and revision. By analyzing the status of the medical device industry standards drafting, thoughts and suggestions were proposed to further promote all relevant parties to actively participate in the standard drafting, effectively improve the quality of the standards, strengthen the technical support and promote the high-quality development of the industry. The statistical data of the participation of social organizations in the drafting and as the first unit drafting medical devices standards from 2017 to 2021 was researched, and the problems in the drafting of standards at this stage were analyzed. Based on the research and analyses, some thoughts and suggestions were proposed to strengthen the management of standard drafting units and promote the participation of all relevant parties in standard drafting. It is necessary to expand and enhance social participation in standard drafting further by innovating incentives, refining and strengthening normative requirements, and creating a positive social atmosphere.

Concerns of Technical Evaluation on Registration of Disposable Endoscopic Injection Needle / 中国医疗器械杂志

From the point of the technical evaluation of the registration of medical devices, the technical evaluation focus of the disposable endoscopic injection needle registration are briefly described in the chapters of the application overview documents, risk management data, product technical requirements, research data, toxic substance residues, biocompatibility evaluation, clinical evaluation data, et al. The common terms of technical requirements are specified, risk management and research materials list the project requirements for product characteristics. So as to accurately judge the product quality, improve the review efficiency, promote the development of the industry.

Progress on the mechanism of n-hexane induced toxic effects in vitro and in vivo / 中华劳动卫生职业病杂志

Hexane is a widely used organic solvent in industry, and chronic hexane poisoning is the main occupational toxic lesion in China. In particular, axonal and myelin lesions in the distal thick fibers of the peripheral nervous system may be caused by 2, 5-hexanedione (2, 5-HD), an intermediate metabolite of n-hexane in humans. Hexane has toxic effects not only on the nervous system but also on the liver, kidneys, and reproductive organs. In this paper, we review the progress of research on the mechanism of n-hexane toxic neuropathy.

Analysis of noise reduction measures in a noise workshop handover control room / 中华劳动卫生职业病杂志

Objective: To explore the sound insulation, sound absorption and other noise reduction transformation methods in a noise workshop handover control room. Methods: In December 2021, through the occupational health investigation and on-site testing of the handover control room of a noise workshop, the causes of excessive noise were analyzed, and the transformation design scheme to reduce noise was proposed and the effect was analyzed. Results: Before the transformation, the peak frequency band noise intensity of the noise workshop handover control room was 112.8 dB (A), and the peak frequency was 1000 Hz. After noise reduction, the theoretical calculated control value was 61.0 dB (A), and the measured noise intensity was 59.8 dB (A) . Conclusion: The noise intensity of the handover control room is reduced after noise reduction, which is in line with the contact limit requirements of the control room in GBZ 1-2010 "Hygienic Standards for the Design of Industrial Enterprises", and has reference significance for noise control engineering.

High-value utilization technology and approach of Chinese medicinal residues under background of "Dual Carbon" / 中国中药杂志

In recent years, the traditional Chinese medicine(TCM)industry has experienced rapid development, resulting in a significant amount of Chinese medicinal residues generated during the industrial manufacturing process. Currently, the main methods of handling Chinese medicinal residues include stacking, landfilling, and incineration, which lead to substantial resource waste and potential environmental pollution. With "carbon peak" and "carbon neutrality"( "Dual Carbon")becoming national strategic goals, the TCM industry is ushering in a new wave of "low-carbon" trends, and the high-value utilization of Chinese medicinal residues has become a breakthrough for implementing a low-carbon economy in the TCM sector. From the perspective of a low-carbon economy, this article reviewed literature in China and abroad to summarize the microbial transformation technology, enzymatic conversion technology, biomass pyrolysis, gasification, hydrothermal liquefaction, and other high-value utilization technologies for Chinese medicinal residues. It also overviewed the applications of Chinese medicinal residue in feed additives, organic fertilizers, edible mushroom cultivation substrates, preparation of activated carbon for wastewater treatment, and new energy batteries. Considering the current status of resource utilization of Chinese medicinal residues, feasible strategies and suggestions for resource development and utilization were proposed to improve the quality and efficiency of the Chinese medicinal resource industry chain and promote green development, thereby providing research ideas and theoretical basis for achieving carbon peak and carbon neutrality goals.

Exposición intrauterina a disruptores endocrinos (ftalatos): fuentes de exposición y cuantificación de metabolitos urinarios / Intrauterine exposure to endocrine disruptors (phthalates): sources of exposure and quantification of urinary metabolites

Introducción: Los ftalatos son disruptores endocrinos usados en la fabricación de múltiples productos de la industria, principalmente plásticos. El periodo fetal representa la principal ventana de vulnerabilidad, y la exposición a ftalatos en esta etapa de vida genera efectos adversos fetales y postnatales. El biomarcador más fiable para medición de ftalatos es la orina. Objetivo: Caracterizar las diferentes fuentes de exposición a disruptores endocrinos y cuantificar la concentración urinaria de ftalatos en gestantes. Materiales y métodos: Estudio transversal, observacional y descriptivo que incluye 400 gestantes que asistieron a control prenatal en las instituciones de salud Génesis y Metrosalud (Medellín-Colombia). Se caracterizaron fuentes de exposición, se recolectó muestras de orina de todas las gestantes, y cuantificó la concentración de ftalatos de 38 mujeres. Resultados: Las medias geométricas de ftalato Di(2-ethylhexyl)phthalate(DEHP), Mono-n-butyl phthalate(MnBP), Mono-2-ethyl-5-hydroxyhexyl phthalate(MEHHP) y Mono-2-ethyl-5-oxohexyl phthalate(MEOHP) fueron 162,72µg/L, 58,5 µg/L, 33,93µg/L y 31,63µg/L respectivamente. Conclusiones: La mayoría de las gestantes evaluadas han estado expuestas a lo largo de su vida a fuentes potenciales de disruptores endocrinos, presentes en químicos domésticos, tabaco y uso frecuente de cosméticos faciales y corporales. Las concentraciones de MnBP, MEHHP y MEOHP en orina de las participantes, fueron superiores a los hallazgos a nivel mundial.

Introduction: Phthalates are endocrine disruptors used in the manufacture of various industrial products, mainly plastics. The fetal period represents the principal window of vulnerability, and the exposure to Phthalates in this stage of life generates adverse fetal and post-natal effects. The most reliable biomarker for the assessment of Phthalates is urine. Objective: To characterize the different exposure sources of endocrine disruptors and quantify the urinary concentration of Phthalates in pregnant women. Materials and methods: A cross-sectional, observational, and descriptive study which included 400 pregnant women who received prenatal care in the Genesis and Metrosalud health institutions (Medellín-Colombia). Exposure sources were characterized and urine samples were collected from all pregnant women and the Phthalate concentration was quantified in 38 women. Results: The geometric measures of Phthalate Di(2-ethylhexyl)phthalate(DEHP), Mono-n-butyl phthalate(MnBP), Mono-2-ethyl-5-hydroxyhexyl phthalate(MEHHP) and Mono-2-ethyl-5-oxohexyl phthalate(MEOHP) were 162.72µg/L, 58.5 µg/L, 33.93µg/L and 31.63µg/L respectively. Conclusions: The majority of pregnant women that were evaluated were exposed to potential sources of endocrine disruptors throughout their life, which are present in household chemicals, tobacco, and frequent use of facial and body cosmetics. The concentrations of MnBP, MEHHP y MEOHP in urine of participants were higher than those found worldwide.

Impact of treated sewage on meiobenthic nematodes: a case study from the Tunisian Refining Industries Company / Impacto de esgoto tratado em nematoides meiobentônicos: um estudo de caso da Tunisian Refining Industries Company

The organization of the roots, ganglia and the peripheral distribution of the cranial nerves of the fully formed embryos of Oreochromis niloticus are examined in the transverse serial sections. These nerves carry fibers, which were also analyzed. The results of this study demonstrated that the glossopharyngeal nerve originates by means of only one root, which leaves the cranium through the glossopharyngeal foramen. This nerve gives fibers (visceromotor) to the first internal and external levator arcus branchialis muscles. There is a single epibranchial (petrosal) ganglion located extracranially. Nervus glossopharyngeus has three rami; pharyngeus, pretramticus and posttrematicus. The ramus pharyngeus carries only viscerosensory fibers; general for the pharyngeal epithelium and special ones for the pseudobranch. General viscerosensory fibers are also carried by rami pretrematicus and posttrematicus for the pharyngeal epithelial lining. The special sensory fibers are carried by the ramus pretrematicus for the taste buds and by ramus posttrematicus for the gill filaments. The ramus pretrematicus also carries visceromotor fibers for the first adductor arcus branchialis and to the first obliquus ventralis muscles.

A organização das raízes, gânglios e a distribuição periférica dos nervos cranianos dos embriões totalmente formados de Oreochromis niloticus são examinados nas seções transversais seriais. Esses nervos carregam fibras, que também foram analisadas. Os resultados deste estudo demonstraram que o nervo glossofaríngeo se origina por meio de apenas uma raiz, que sai do crânio pelo forame glossofaríngeo. Este nervo fornece fibras (visceromotoras) para os primeiros músculos levantadores do arco branquial interno e externo. Existe um único gânglio epibranquial (petroso) localizado extracranialmente. Nervus glossopharyngeus tem três ramos; faríngeo, pretramticus e póstrematicus. O ramo faríngeo contém apenas fibras viscerossensoriais ­ gerais para o epitélio faríngeo e especiais para o pseudobrânquio. Fibras viscerossensoriais gerais também são transportadas por ramos pretrematicus e posttrematicus para o revestimento epitelial da faringe. As fibras sensoriais especiais são transportadas pelo ramus pretrematicus para as papilas gustativas e pelo ramus posttrematicus para os filamentos branquiais. O ramo pretrematicus também carrega fibras visceromotoras para o primeiro adutor arcus branchialis e para o primeiro músculo oblíquo ventral.

Analysis on the detection of suspected occupational diseases and occupational contraindications for benzene workers in Tianjin / 中华劳动卫生职业病杂志

Objective: To investigate the detection of suspected occupational diseases and occupational contraindications for benzene workers in Tianjin. Methods: In June 2020, the occupational health inspection data of 16113 benzene workers in 514 enterprises with benzene hazards in 16 municipal districts in Tianjin from January to December 2019 were included in the analysis. Enterprise information included the employer's region, economic type, industry classification and enterprise scale. Occupational health inspection data for benzene workers during their on-the-job period included routine inspection indicators and benzene special inspection indicators. Multivariate unconditional logistic regression was used to analyze the relationship between personal general information, occupational history, enterprise information and suspected benzene poisoning and occupational contraindications of benzene workers. Results: There were 16073 benzene workers in the normal group and 24 in the suspected benzene poisoning group. The detection rate of suspected benzene poisoning in females was higher than that in males (χ(2)=8.26, P=0.004) . There was no significant difference in the detection rates of suspected benzene poisoning among different dimensions such as age, length of service, occupational health inspection institution location, employer location, industry classification, economic type, and enterprise scale (P>0.05) . There were 16073 benzene workers in the normal group and 16 in the benzene contraindication group. The detection rate of benzene contraindications for workers in suburban areas where occupational health inspection institutions were located was higher than that in urban areas (χ(2)=9.71, P=0.002) , and there was no significant difference in the detection rates of contraindications for benzene in other dimensions (P>0.05) . Multivariate logistic regression analysis showed that female benzene workers were more likely to detect suspected benzene poisoning (OR=3.53, 95%CI: 1.57-7.94, P=0.002) ; benzene workers who received physical examination in suburban occupational health inspection institutions (OR=5.81, 95%CI: 1.94-17.42, P=0.002) , the employer's area was in the suburbs (OR=9.68, 95%CI: 1.23-76.07, P=0.031) , and female workers (OR=3.07, 95%CI: 1.13-8.37, P=0.028) , it was easier to detect occupational contraindications. Conclusion: Female benzene workers with employers located in the suburbs have a higher risk of detecting occupational contraindications, and women are more likely to detect suspected benzene poisoning. The management of benzene operations in the production environment of enterprises in the suburbs of Tianjin and the occupational health monitoring of female workers should be strengthened.

Analysis on the incidence of new occupational diseases in Weihai City from 2009 to 2020 / 中华劳动卫生职业病杂志

Objective: To analyze the pattern and characteristics of occupational diseases in Weihai City from 2009 to 2020, and to provide scientific basis for the formulation of occupational disease prevention. Methods: In February 2021, retrospective analysis was performed on the cases of occupational diseases diagnosed from 2009 to 2020 in Weihai City. The relevant information and data were collected to analyze the types of occupational diseases, onset age, working age, diagnosis time, industry distribution, economic type and enterprise size distribution. Results: From 2009 to 2020, a total of 453 cases of new occupational diseases were reported in Weihai City. There were 431 males (95.14%) and 22 females (4.86%) . The average onset age was (49.16±8.51) years, and the average working age was (17.89±9.30) years. The incidence of pneumoconiosis and other respiratory diseases (322 cases, 71.08%) , occupational otolaryngology and oral diseases (71 cases, 15.67%) and occupational chemical poisoning (36 cases, 7.95%) were the top 3 cases, of which 313 cases were pneumoconiosis and 69 cases were noise deafness. The cases were mainly concentrated in the 40-59 years age group (357 cases, 78.81%) and the 10-19 years working age group (175 cases, 38.63%) . There were significant differences in the incidence of occupational diseases in different ages and different working ages (χ(2)=97.64, 80.74, P<0.001) . The new cases were mainly in mining industry (134 cases, 29.58%) , shipbuilding or maintenance industry (97 cases, 21.41%) , and private enterprises (350 cases, 77.26%) . Conclusion: Pneumoconiosis and noise deafness are the main emerging occupational diseases in Weihai City. Occupational disease prevention and control in private enterprises such as mining and shipbuilding or maintenance industry should be strengthened.

Research on the Necessity and Feasibility of Current Medical Device Supervision Legislation / 中国医疗器械杂志

This paper studies the necessity of the current legislation on the supervision of medical devices in China from the perspectives of strengthening administration according to law, protecting public health, perfecting the legal system of medicine and promoting the development of the medical device industry. This study analyzes and summarizes the legislative experiences and forms in the field of medical device regulation in the United States, the European Union, Japan and other countries and regions, at present, the conditions of carrying out the legislation of medical device supervision in China are quite mature, and some policy suggestions are put forward for the enactment of the law of medical device management in China.

Chinese medicinal materials industry during the 14th Five-Year Plan period: trends and development suggestions / 中国中药杂志

This study steps through the future perspectives and gives the development suggestions of Chinese medicinal materials(CMM) industry by presenting the characteristics and open problems during the 13 th Five-Year Plan period. The development of CMM industry presents the following trends:(1)the development of Dao-di herbs speeds up with the increasing demand for high-quality CMM;(2)the mismatch between supply and demand is aggravating, which presses for supply-side structural reform;(3)ecological planting will become the core mode of production and bolster rural revitalization;(4)the demand for CMM with both medical and edible values keeps growing, and the antibiotic-free feed policy brings significant opportunities;(5)the "Internet Plus CMM" wave emerges, which promotes the construction of traceability system. Finally, we put forward the following suggestions for the sustainable development of CMM industry:(1)optimizing the layout for the production of Dao-di herbs according to local conditions;(2)strengthening the commercialization of the seeds and the breeding, multiplication, and extension of CMM to accelerate the realization of specialized seed production, mechanized seed processing, localized variety layout, and county-based unified seed supply;(3)ensuring the safety of pesticide use and accelerating the registration of special pesticides;(4)promoting both theoretical and practical research on ecological production of CMM;(5)publicizing the demonstration and popularization of CMM traceability system. Overall, significant progress has been achieved in the CMM industry during the 13 th Five-Year Plan period, and this industry is in a critical stage of high-quality development, facing both challenges and opportunities.