Résumé
S-adenosyl-l-methionine (SAM) is ubiquitous in living organisms and plays important roles in transmethylation, transsulfuration and transamination in organisms. Due to its important physiological functions, production of SAM has attracted increasing attentions. Currently, researches on SAM production mainly focus on microbial fermentation, which is more cost-effective than that of the chemical synthesis and the enzyme catalysis, thus easier to achieve commercial production. With the rapid growth in SAM demand, interests in improving SAM production by developing SAM hyper-producing microorganisms aroused. The main strategies for improving SAM productivity of microorganisms include conventional breeding and metabolic engineering. This review summarizes the recent research progress in improving microbial SAM productivity to facilitate further improving SAM productivity. The bottlenecks in SAM biosynthesis and the solutions were also addressed.
Sujets)
Adémétionine/métabolisme , Amélioration des plantes , Fermentation , Génie métaboliqueRésumé
Tacrolimus (FK506) is a 23-membered macrolide with immunosuppressant activity that is widely used clinically for treating the rejection after organ transplantation. The research on tacrolimus production was mainly focused on biosynthesis methods, within which there are still some bottlenecks. This review summarizes the progress made in tacrolimus biosynthesis via modification of metabolic pathways and control of fermentation process, with the hope to address the technical bottlenecks for tacrolimus biosynthesis and improve tacrolimus production by fermentation engineering and metabolic engineering.
Sujets)
Tacrolimus , Immunosuppresseurs , Fermentation , Macrolides , AntibactériensRésumé
L-methionine, also known as L-aminomethane, is one of the eight essential amino acids required by the human body and has important applications in the fields of feed, medicine, and food. In this study, an L-methionine high-yielding strain was constructed using a modular metabolic engineering strategy based on the M2 strain (Escherichia coli W3110 ΔIJAHFEBC/PAM) previously constructed in our laboratory. Firstly, the production of one-carbon module methyl donors was enhanced by overexpression of methylenetetrahydrofolate reductase (methylenetetrahydrofolate reductase, MetF) and screening of hydroxymethyltransferase (GlyA) from different sources, optimizing the one-carbon module. Subsequently, cysteamine lyase (hydroxymethyltransferase, MalY) and cysteine internal transporter gene (fliY) were overexpressed to improve the supply of L-homocysteine and L-cysteine, two precursors of the one-carbon module. The production of L-methionine in shake flask fermentation was increased from 2.8 g/L to 4.05 g/L, and up to 18.26 g/L in a 5 L fermenter. The results indicate that the one carbon module has a significant impact on the biosynthesis of L-methionine, and efficient biosynthesis of L-methionine can be achieved through optimizing the one carbon module. This study may facilitate further improvement of microbial fermentation production of L-methionine.
Sujets)
Humains , Méthionine , Methylenetetrahydrofolate reductase (NADPH2) , Carbone , Cystéine , Escherichia coli/génétique , Hydroxymethyl et formyl transferases , Protéines de transport , Protéines Escherichia coliRésumé
Adenosine triphosphate (ATP) regeneration systems are essential for efficient biocatalytic phosphoryl transfer reactions. Polyphosphate kinase (PPK) is a versatile enzyme that can transfer phosphate groups among adenosine monophosphate (AMP), adenosine diphosphate (ADP), ATP, and polyphosphate (Poly P). Utilization of PPK is an attractive solution to address the problem of ATP regeneration due to its ability to use a variety of inexpensive and stable Poly P salts as phosphate group donors. This review comprehensively summarizes the structural characteristics and catalytic mechanisms of different types of PPKs, as well as the variations in enzyme activity, catalytic efficiency, stability, and coenzyme preference observed in PPKs from different sources. Moreover, recent advances in PPK-mediated ATP regeneration systems and protein engineering of wild-type PPK are summarized.
Sujets)
Adénosine triphosphate/métabolisme , AMP , Polyphosphates/métabolisme , Catalyse , RégénérationRésumé
The development of synthetic biology has greatly promoted the construction of microbial cell factories, providing an important strategy for green and efficient chemical production. However, the bottleneck of poor tolerance to harsh industrial environments has become the key factor hampering the productivity of microbial cells. Adaptive evolution is an important method to domesticate microorganisms for a certain period by applying targeted selection pressure to obtain desired phenotypic or physiological properties that are adapted to a specific environment. Recently, with the development of technologies such as microfluidics, biosensors, and omics analysis, adaptive evolution has laid the foundation for efficient productivity of microbial cell factories. Herein, we discuss the key technologies of adaptive evolution and their important applications in improvement of environmental tolerance and production efficiency of microbial cell factories. Moreover, we looked forward to the prospects of adaptive evolution to realize industrial production by microbial cell factories.
Sujets)
Génie métabolique , Microbiologie industrielle/méthodes , Biologie synthétique , Environnement , IndustrieRésumé
L-homoserine and its derivatives (O-succinyl-L-homoserine and O-acetyl-L-homoserine) are precursors for the biosynthesis of L-methionine, and various C4 compounds (isobutanol, γ-butyrolactone, 1, 4-butanediol, 2, 4-dihydroxybutyric acid) and L-phosphinothricin. Therefore, the fermentative production of L-homoserine and its derivatives became the research hotspot in recent years. However, the low fermentation yield and conversion rate, and the unclear regulation mechanism for the biosynthesis of L-homoserine and its derivatives, hamper the development of an efficient production process for L-homoserine and its derivatives. This review summarized the advances in the biosynthesis of L-homoserine and its derivatives by metabolic engineering of Escherichia coli from the aspects of substrate uptake, redirection of carbon flow at the key nodes, recycle of NADPH and export of target products. This review may facilitate subsequent metabolic engineering and biotechnological production of L-homoserine and its derivatives.
Sujets)
Escherichia coli/métabolisme , Génie métabolique , Homosérine/métabolisme , Protéines Escherichia coli/métabolisme , FermentationRésumé
l-cysteine is an important sulfur-containing α-amino acid. It exhibits multiple physiological functions with diverse applications in pharmaceutical cosmetics and food industry. Here, a strategy of coordinated gene expression between carbon and sulfur modules in Escherichia coli was proposed and conducted for the production of l-cysteine. Initially, the titer of l-cysteine was improved to (0.38±0.02) g/L from zero by enhancing the biosynthesis of l-serine module (serAf, serB and serCCg) and overexpression of CysB. Then, promotion of l-cysteine transporter, increased assimilation of sulfur, reduction or deletion of l-cysteine and l-serine degradation pathway and enhanced expression of cysEf (encoding serine acetyltransferase) and cysBSt (encoding transcriptional dual regulator CysB) were achieved, resulting in an improved l-cysteine titer (3.82±0.01) g/L. Subsequently, expressions of cysM, nrdH, cysK and cysIJ genes that were involved in sulfur module were regulated synergistically with carbon module combined with utilization of sulfate and thiosulfate, resulting in a strain producing (4.17±0.07) g/L l-cysteine in flask shake and (11.94±0.1) g/L l-cysteine in 2 L bioreactor. Our results indicated that efficient biosynthesis of l-cysteine could be achieved by a proportional supply of sulfur and carbon in vivo. This study would facilitate the commercial bioproduction of l-cysteine.
Sujets)
Escherichia coli/métabolisme , Cystéine/métabolisme , Bioréacteurs , Soufre/métabolisme , Sérine/métabolismeRésumé
As a strategic emerging industry of China, the biotechnology industry develops rapidly in recent years, which significantly increased the demand for creative and capable talents. As a core curriculum of bioengineering specialty, biotechnology equipment plays an important role in fostering such talents. To address the problems in biotechnology equipment course teaching such as limited equipment availability, limited engineering practice, and lack of learning motivations, curriculum reform and optimization were performed based on curriculum resource development, virtual reality-physical combined engineering training, and boosting learning motivations. The optimized teaching contents focus on fostering morality, intelligence, and creative practice abilities by connecting new requirements of social development, introducing new progress in biotechnology research, as well as new practices in research and development (R & D). Measures such as teaching methods innovation, assessment and evaluation methods optimization, cutting-edge R & D progress, diverse resources integration, and online-offline combined teaching, were developed to boost the learning motivation and foster the innovation competence of students. By above exploration and practice, the practice and innovation competence of students were significantly enhanced.
Sujets)
Humains , Étudiants , Apprentissage , Programme d'études , Bioingénierie , Génie biomédicalRésumé
The redox biosynthesis system has important applications in green biomanufacturing of chiral compounds. Formate dehydrogenase (FDH) catalyzes the oxidation of formate into carbon dioxide, which is associated with the reduction of NAD(P)+ into NAD(P)H. Due to this property, FDH is used as a crucial enzyme in the redox biosynthesis system for cofactor regeneration. Nevertheless, the application of natural FDH in industrial production is hampered by low catalytic efficiency, poor stability, and inefficient coenzyme utilization. This review summarized the structural characteristics and catalytic mechanism of FDH, as well as the advances in protein engineering of FDHs toward improved enzyme activity, catalytic efficiency, stability and coenzyme preference. The applications of using FDH as a coenzyme regeneration system for green biomanufacturing of chiral compounds were summarized.
Sujets)
Catalyse , Coenzymes/métabolisme , Formate dehydrogenases/métabolisme , NAD/métabolisme , Ingénierie des protéinesRésumé
Unnatural amino acids are widely used in medicine, pesticide, material, and other industries and the green and efficient synthesis has attracted a lot of attention. In recent years, with the rapid development of synthetic biology, microbial cell factories have become a promising means for biosynthesis of unnatural amino acids. This study reviewed the construction and application of microbial cell factories for unnatural amino acid, including the synthetic pathway reconstruction, design/modification of key enzymes and their coordinated regulation with precursors, blocking of competitive alternative pathways, and construction of cofactor circulation systems. Meanwhile, on the basis of the new principles for designing the microbial cell factories, new biosynthetic pathways adapted to cells and the production environment, as well as new biomanufacturing system established based on cell adaptive evolution and intelligent fermentation regulation, we looked forward to the further construction and application of microbial cell factories for industrial bio-production.
Sujets)
Acides aminés/génétique , Voies de biosynthèse , Fermentation , Génie métabolique , Biologie synthétiqueRésumé
A stable Zr-based metal-organic framework (MOF, UiO-66-NH2) synthesized via micro-water solvothermal method was used to immobilize amidase by using the glutaraldehyde crosslinking method. The effect of immoblization conditions on enzyme immoblization efficiency was studied. An activity recovery rate of 86.4% and an enzyme loading of 115.3 mg/g were achieved under the optimal conditions: glutaraldehyde concentration of 1.0%, cross-linking time of 180 min, and the weight ratio of MOF to enzyme of 8:1. The optimal temperature and optimal pH of the immobilized amidase were determined to be 40 °C and 9.0, respectively, and the Km, Vmax and kcat of the immoblized amidase were 58.32 mmol/L, 16.23 μmol/(min·mg), and 1 670 s⁻¹, respectively. The immobilized enzyme was used for (S)-4-fluorophenylglycine synthesis and the optimal reaction conditions were 300 mmol/L of N-phenylacetyl-4-fluorophenylglycine, 10 g/L of immobilized enzyme loading, and reacting for 180 min at pH 9.0 and 40 °C. A conversion rate of 49.9% was achieved under the optimal conditions, and the conversion rate can be increased to 99.9% under the conditions of enantiomeric excess. The immobilized enzyme can be repeatedly used, 95.8% of its original activity can be retained after 20 cycles.
Sujets)
Amidohydrolases , Stabilité enzymatique , Enzymes immobilisées/métabolisme , Glycine/analogues et dérivés , Concentration en ions d'hydrogène , Réseaux organométalliques , TempératureRésumé
L-Homoserine is a non-essential amino acid that is often used as an important platform compound and additive in industrial production. To improve the production efficiency, a previously constructed L-homoserine producing strain E. coli H0-0 was used as a chassis for further metabolic modification. Firstly, the ppc and pyccgP458S genes were overexpressed to optimize the Kreb's cycle. Subsequently, thrAC1034T and lysCcgC932T were overexpressed to improve the product synthesis, followed by inactivation of iclR gene to reduce the accumulation of by-products. The introduction of three sucrose metabolism genes, scrA, scrB and scrK, enabled E. coli to ferment sucrose. The titer of L-homoserine increased from 3.2 g/L to 11.1 g/L.
Sujets)
Escherichia coli/génétique , Homosérine , Génie métabolique , SérineRésumé
Enzymes have a wide range of applications and great industrial potential. However, large-scale applications of enzymes are restricted by the harsh industrial environment, such as high temperature, strong acid/alkali, high salt, organic solvents, and high substrate concentration. Adaptive modification (such as rational or semi-rational design, directed evolution and immobilization) is the most common strategy to improve the catalysis of enzymes under industrial conditions. Here, we review the catalysis of enzymes in the industrial environment and various methods adopted for the adaptive modifications in recent years, to provide reference for the adaptive modifications of enzymes.
Sujets)
Biocatalyse , Biotechnologie , Enzymes , Chimie , Métabolisme , Température élevée , Concentration en ions d'hydrogène , Ingénierie des protéines , Solvants , Chimie , PharmacologieRésumé
Objective To investigate the effect of insulin-like growth factor 1 antibody (IGF-1Ab) on motor endplate function after injection ofbotulinum toxin A (Btx-A).Methods The total 90 male SD rats were randomly divided into 4 groups:control group,Btx-A group and 2 ug and 20 ug IGF-1Ab groups.In Btx-A and IGF-1Ab groups,a volume of 0.5 U (0.1 mL) Btx-A was intramuscularly injected into a site in the fight gastrocnemius muscle;on day 3,equal volumes (0.1 mL) of IGF-1Ab with a dosage of 2 ug and 20 ug were injected to the 2 ug and 20 ug IGF-1Ab groups respectively at the same site.The gastrocnemius muscle strength and the mean optical density (MOI) value of the positive reaction zone of acetylcholine esterase staining were evaluated at different time points.Results The gastrocnemius muscle strength increased from 12.34±0.16 g before injection to 7.70±0.90 g after injection in the Btx-A group;the gastrocnemius muscle strength decreased in other groups after injection of Btx-A;on day 14,28,42,56 and 70,the muscle strength oflGF-1Ab groups was significantly lower than that of Btx-A group (P<0.05),and on day 42-70,the value of muscle strength of 20 ug IGF-1Ab group was signficantly lower than that of 2 μg IGF-1Ab group (P<0.05).The MOI values of the positive reaction zone changed with the same trend.Conclusion IGF-1Ab can suppress the restore of motor endplate function after injection of Btx-A.
Résumé
Anidulafungin is an effective antifungal medicine, which can inhibit activities of candida in vitro and in vivo. Echinocandin B (ECB) is the key precursor of Anidulafungin, thus the price and market prospect of Anidulafungin is directly due to the fermentation titer of ECB. In this study, Aspergillus nidulans was used for ECB fermentation, and the influence of adding microparticles on ECB fermentation was studied, such as talcum powder, Al2O3, and glass beads. The particle size and concentration were the key factors for mycelium morphology and ECB production, and ECB production could reach 1 262.9 mg/L and 1 344.1 mg/L by adding talcum powder of 20 g/L (d50 = 14.2 μm) and 7 glass beads (6 mm), an increase by 33.2% and 41.7%, respectively. The results indicated that the mycelium morphology of filamentous microorganisms and the product yield of fermentation could be improved by adding microparticles remarkably, and it provide an important method for the fermentative optimization of filamentous microorganisms.
Sujets)
Antifongiques , Métabolisme , Aspergillus nidulans , Métabolisme , Échinocandines , Fermentation , Protéines fongiques , Microbiologie industrielle , MéthodesRésumé
Enantioselective hydrolysis of 2-carboxyethyl-3-cyano-5-methylhexanoic acid (CNDE) is the key step in chemoenzymatic synthesis of pregabalin. We purified an intracellular carboxyl esterase from Morganella morganii ZJB-09203, which exhibited high enantioselectivity and activity towards CNDE. The carboxyl esterase was purified to electrophoretic homogeneity by ammonium sulfate fraction precipitation, Phenyl Sepharose 6 FF hydrophobic interaction chromatography, anion exchange with DEAE Sephadex A-50 and Bio-Scale CHT column. The purified enzyme was a monomer with molecular mass of 68 kDa determined by SDS-PAGE and gel chromatography. Substrate specificity of the enzyme towards p-nitrophenyl esters suggested that the purified enzyme was an esterase. The optimal reaction pH for CNDE hydrolysis was 9.0, and optimal temperature was 45 degrees C. The esterase was stable between pH 7.0 and 9.0, and at 40 degrees C. The enzyme activity was enhanced by Ca2+, Cu2+ and Mn2+, whereas strongly inhibited by Co2+, Fe3+, Ni2+ and EDTA. Meanwhile, we investigated the kinetic parameters of the esterase towards p-nitrophenyl esters and effect of CNDE concentration on conversion. The present study reported the esterase capable of stereospecific hydrolysis of CNDE for the first time. Our research will provide foundations for industrial production of Pregabalin using the new biocatalyst.
Sujets)
Chromatographie sur gel , Électrophorèse sur gel de polyacrylamide , Esterases , Métabolisme , Concentration en ions d'hydrogène , Cinétique , Masse moléculaire , Morganella morganii , Spécificité du substrat , TempératureRésumé
Objective To investigate the impact of polyclonal neural cell adhesion molecule antibody (P-NCAM-Ab) on the potency of botulinum toxin A (BTX-A).Methods Ninety male Sprague-Dawley rats were randomly divided into 3 equal groups:a normal control group,a BTX-A group and a P-NCAM-Ab group.The rats in the normal control group were injected with 100 μl of saline solution in their right gastrocnemius,while those in the BTX-A and P-NCAM-Ab groups were injected with 100 μl of BTX-A (0.5 U).In addition,the rats in the P-NCAM-Ab group were also injected with 100 μl of P-NCAM-Ab (the dosage was 20 U) at the same site on the 3rd day after the BTX-A injection.The rats' gastrocnemius muscle strength was evaluated with a self-made system for evaluating neuromuscular function before and after the toxin injection,on the 3rd day,as well as 1,2,4,6,8,10 and 12 weeks after the BTX-A injection.Any wet weight changes in the muscles were observed,and immunochemistry methods were employed to observe any structural changes in the motor endplates and nerve fibers at the different time points.Results After the saline injection,the average gastrocnemius muscle strength of the control group increased with time,while strength in the BTX-A and P-NCAM-Ab groups demonstrated a decrease in strength followed by a gradual increase.The average gastrocnemius muscle strength of the rats in the BTX-A and P-NCAM-Ab groups was significantly lower than that of the control group at all time points.Compared with the BTX-A group,the muscle strength of the P-NCAM-Ab group rats decreased further.Strength recovery in the BTX-A and P-NCAM-Ab groups was significantly slower than in the control group.The wet weight percentage in the BTX-A and P-NCAM-Ab groups at first decreased and then recovered with time.After the BTX-A injection,the average wet weight percentage of the P-NCAM-Ab group rats was significantly lower than that of the BTX-A group after 3 days,and 1,2 and 4 weeks.Karnovsky-Roots AchE staining showed that the motor endplates' color in the BTX-A and P-NCAM-Ab groups deepened gradually,though the color of the P-NCAM-Ab group was lighter than that of the BTX-A group at each time point.The mean optical density of the motor endplates' positive reaction area increased with time in both groups,but the P-NCAM-Ab group was lower than that of the BTX-A group at 1,2,4,8 and 12 weeks.Counting the nerve fibers dyed by gold chloride showed similar trends with both experimental groups significantly different from the control group.Conclusion P-NCAM-Ab can increase the potency of BTX-A and prolong its action.
Résumé
3-Hydroxypropionic acid is an important building block to synthesize lots of industrially valuable chemicals. In this study, we firstly investigated the effects of cell, substrate and product concentrations on biosynthesis of 3-hydroxypropionic acid from 1,3-propanediol by Gluconobacter oxydans ZJB09112 in 50-mL shake flask containing 10 mL transformation liquid. To avoid the inhibition of substrate and product, we adopted fed-batch biotransformation and fed-batch biotransformation coupled with in situ product removal in 2-L bubble column reactor containing 1 L transformation liquid. The results show that high concentrations of substrate and product could inhibit the biotransformation by decreasing the initial reaction rate, and the optimal reaction conditions were as follows: cell concentration 6 g/L, pH 5.5. Fed-batch biotransformation in which the substrate concentration was maintained at 15-20 g/L could obtain product concentration of 60.8 g/L after 60 h, which gave a productivity of 1.0 g/(Lh) and a yield of 84.3%. Furthermore, fed-batch biotransformation coupled with in situ product removal could achieve the total product concentration of 76.3 g/L after 50 h, which gave a productivity of 1.5 g/(L x h) and a yield of 83.7%. The results obtained here may be useful for the application of G. oxydans in biocatalysis industry by using its characteristic of incomplete oxidation of alcohols.
Sujets)
Techniques de culture cellulaire en batch , Biotransformation , Gluconobacter oxydans , Métabolisme , Acide lactique , Oxydoréduction , Propylène glycols , MétabolismeRésumé
1,3-Dihydroxyacetone is widely used in cosmetics, medicines and food products. We reviewed the recent progress in metabolic pathways, key enzymes, as well as metabolic engineering for microbial production of 1,3-dihydroxyacetone. We addressed the research trend to increase yield of 1,3-dihydroxyacetone by improving the activity of glycerol dehydrogenase with genetic engineering, and regulating of fermentation process based on metabolic characteristic of the strain.
Sujets)
Dihydroxyacétone , Fermentation , Génie génétique , Méthodes , Gluconobacter oxydans , Génétique , Métabolisme , Microbiologie industrielle , Méthodes , Génie métabolique , Méthodes , Sugar alcohol dehydrogenases , MétabolismeRésumé
There is growing interest in biodiesel and this results in the accumulation of glycerol. The exploitation and application of glycerol has attracted more and more attention. In the current study, glycerol was biotransformed to produce 3-hydroxypropionaldehyde by genetic engineering bacteria. It is known that 3-hydroxypopionaldehyde has been widely used as an important intermediate for chemicals, effective antimicrobial agent, and fix agent for tissues. A pair of primers was designed on the basis of the sequence of both NH2-terminus and the amino acid sequence of glycerol dehydratase reported by NCBI, and a fragment about 1.6 kb was obtained by PCR amplification using the total genome DNA of Lactobacillus reuteri as template, then the fragment was cloned to the pMD18-T vector and sequenced. Two specific primers were designed according to the obtained sequence, and a fragment with length of 1674 bp was amplified using PCR with these two specific primers. Consequently, the resulting products were digested with EcoR I and Hind III and ligated using T4 DNA ligase to the pET28b vector digested with the same enzymes. The recombinant plasmid, named pET28b-dhaB, was transformed into E. coli BL21. The positive clones were induced with IPTG and the expression products were further analyzed by SDS-PAGE, indicating that protein with a molecule weight of around 65 kD was obtained. Furthermore, the glycerol dehydratase activity was evaluated and compared with the wild type strain as well.