Fate of Listeria monocytogenes during freezing, thawing and home storage of frankfurters.

Little information is available regarding the fate of Listeria monocytogenes during freezing, thawing and home storage of frankfurters even though recent surveys show that consumers regularly store unopened packages in home freezers. This study examined the effects of antimicrobials, refrigerated storage, freezing, thawing method, and post-thawing storage (7 degrees C) on L. monocytogenes on frankfurters. Inoculated (2.1 log CFU/cm(2)) frankfurters formulated without (control) or with antimicrobials (1.5% potassium lactate plus 0.1% sodium diacetate) were vacuum-packaged, stored at 4 degrees C for 6 or 30 d and then frozen (-15 degrees C) for 10, 30, or 50 d. Packages were thawed under refrigeration (7 degrees C, 24 h), on a countertop (23 +/- 2 degrees C, 8 h), or in a microwave oven (2450 MHz, 1100 watts, 220 s followed by 120 s holding), and then stored aerobically (7 degrees C) for 14 d. Bacterial populations were enumerated on PALCAM agar and tryptic soy agar plus 0.6% yeast extract. Antimicrobials completely inhibited (p < 0.05) growth of L. monocytogenes at 4 degrees C for 30 d under vacuum-packaged conditions, and during post-thawing aerobic storage at 7 degrees C for 14 d. Different intervals between inoculation and freezing (6 or 30 d) resulted in different pathogen levels on control frankfurters (2.1 or 3.9 log CFU/cm(2), respectively), while freezing reduced counts by <1.0 log CFU/cm(2). Thawing treatments had little effect on L. monocytogenes populations (<0.5 log CFU/cm(2)), and post-thawing fate of L. monocytogenes was not influenced by freezing or by thawing method. Pathogen counts on control samples increased by 1.5 log CFU/cm(2) at d-7 of aerobic storage, and reached 5.6 log CFU/cm(2) at d-14. As indicated by these results, consumers should freeze frankfurters immediately after purchase, and discard frankfurters formulated without antimicrobials within 3 d of thawing and/or opening.

Using reflectance spectroscopy to predict beef tenderness.

A study was conducted to determine if reflectance measurements made in the near-infrared region of the spectrum were additive to reflectance measurements made in the visible region of the spectrum for predicting Warner-Bratzler shear force (WBSF) values. Eighty seven strip loins were collected following fabrication over 3d at a commercial beef processing facility from heifer carcasses with Slight or Traces marbling scores. Spectroscopic measurements were made at approximately 50h postmortem using a Hunter-Lab UltraScan. Subsequently, all strip loins were aged for 14d, cooked to an internal temperature of 70°C, and sheared to obtain WBSF values. Reflectance measurements obtained in the near-infrared region of the spectrum were correlated with WBSF values, however, these measurements were not additive to the predictive ability of reflectance measurements (R(2) values did not differ) made in the visible portion of the spectrum when the use of broad-band wavelength filters were simulated. It was therefore determined, that both the visible and near-infrared spectra measure reflectance and that both methods are acceptable methods of tenderness prediction.

Special-Fed Veal: Separable components, proximate composition, and nutrient analysis of selected raw and cooked, wholesale and retail cuts.

Nutrition research continues to be important for consumers to make informed food purchasing decisions and is used in nutrition policy decisions. The objective of this study was to analyze the nutrient concentration of raw and cooked cuts from special-fed veal calves to update nutrient data in the USDA National Nutrient Database for Standard Reference (SR) Release 27. Packages of wholesale (whole loin roasts, center-cut hindshanks and ground veal) and retail veal cuts (osso buco foreshanks, loin chops, leg cutlets and shoulder blade chops) were randomly collected in original vacuum packaging from six U.S. suppliers. Packages were shipped to the Colorado State University Meat Laboratory for cut dissection, cooking, and nutrient analysis. Composites of lean, external fat and seam fat were formed for analysis of proximate, fatty acid, vitamin and mineral composition. Results from this study identified additional fatty acids, established choline concentration, and provided updated veal nutrient composition information for inclusion in USDA SR 27.

An evaluation of central nervous system cross-contamination due to carcass splitting in commercial beef-packing plants.

Four experiments were conducted in commercial beef-packing facilities The objectives of these experiments were to: (i) determine and validate a carcass sampling technique and location to determine if central nervous system (CNS) cross-contamination exists/occurs; (ii) determine if residual CNS tissue contamination remains on splitting saws after sanitation procedures; (iii) determine the prevalence of CNS cross-contamination in commercial slaughter facilities; (iv) determine whether washing treatments reduce or eliminate CNS tissue presence in carcass-splitting saws; (v) determine the effectiveness of commercial spray-washing systems in removing CNS tissue from beef carcasses; and (vi) compare residual CNS tissue levels on the blade and in the housings of the Jarvis Buster IX and Buster IV carcass-splitting saws. CNS tissue remained, albeit at very low levels, in the housings and on the blades of carcass-splitting saws after carcass splitting and operational sanitation. Additionally, after splitting carcasses, CNS tissue remaining in the splitting saw housings and on saw blades was found to cross-contaminate subsequent carcasses during splitting. Most splitting saw operational sanitation procedures reduced the amount of CNS tissue remaining in the splitting saw housings and on splitting saw blades, but no treatment eliminated CNS tissue from either to levels below the detection limit of the assay (6 ng/100 cm2). Washing in carcass spray-washing cabinets at three of the five commercial beef-packing facilities reduced, but did not eliminate, presence of CNS tissue in the aitch bone area of carcasses. Carcass spray washing in cabinets at three of the five facilities reduced (P < 0.05) the concentration of CNS tissue in the fourth thoracic vertebra area. While extremely low concentrations of CNS tissue remained in the splitting saw housings, on the splitting saw blades, and on carcasses, it is unknown whether these levels would pose a human food safety risk because the exact amount of bovine spongiform encephalopathy-infected spinal cord capable of transmitting the disease to humans is dependent on the infectivity titer, which is not readily known.

Estimated compliance for removal of specified risk materials from 18 U.S. beef packing plants.

The removal of 18,345 specified risk materials was observed during audits of 18 U.S. beef processing facilities that, in total, account for over 90% of total U.S. beef slaughtered. Audited plants varied in capacity (280 to 6,000 head per day) and processed both "fed (young cattle)" and "nonfed (mature cows/bulls)" cattle. When all observations for removal of specified risk materials were combined from plants and adjusted for type of cattle processed, overall compliance with specified risk material removal regulations was 98.08%. A 100% compliance rate for removal of brains and distal ileums was recorded based on a total of 600 observations for removal of brains and a total of 2,400 observations for removal of distal ileums. Observations for removal of dorsal root ganglia were collected from 16 of the 18 plants, and overall compliance for dorsal root ganglia removal was 99.6% (4,783 of 4,800). Fifteen of the 16 plants were 100% compliant. For tonsils, data from 18 plants were collected, and tonsils were correctly removed from 92.8% (4,777 of 5,145) of tongues and heads. Data for spinal cord removal were collected from 18 plants, and the spinal cord was removed completely in line with U.S. Department of Agriculture-Food Safety and Inspection Service regulations for 99.43% of the observations. Based on the results of this study, packing plants have demonstrated that they are complying with regulations for removal of specified risk materials from beef meat products intended for human consumption greater than 98% of the time. To continue to assure food safety and consumer confidence, continued vigilance and provision of training programs for plant workers are essential.

Risk associated with transportation and lairage on hide contamination with Salmonella enterica in finished beef cattle at slaughter.

Transportation of cattle to the slaughter plant could influence hide contamination with Salmonella enterica. Fecal and hide samples were obtained from 40 lots of cattle at the feedlot and again at the slaughter plant. Potential risk factors for hide contamination were evaluated. A multilevel Poisson regression model was used to determine whether transportation and lairage were associated with hide contamination by Salmonella. Cattle with hide samples positive for Salmonella at the feedlot had twice the risk of having positive slaughter hide samples compared with cattle without positive feedlot hide samples (relative risk [RR], 1.9). Cattle transported in trailers from which samples positive for Salmonella were collected had twice the risk of having positive slaughter hide samples compared with cattle transported in culture-negative trailers (RR, 2.3). Cattle transported for long distances had twice the risk of having positive hide samples at slaughter compared with cattle transported shorter distances (RR, 2.3). Cattle held in lairage pens contaminated with feces had twice the risk of having positive slaughter hide samples compared with cattle held in clean pens (RR, 1.8). Cattle held off feed longer than 18 h before loading had twice the risk of having positive slaughter hide samples compared with cattle held off feed for shorter times (RR, 1.7). Cattle that were agitated during loading had twice the risk of having positive slaughter hide samples compared with cattle that were calm (RR, 2.2). These findings suggest that variables associated with transportation and lairage can impact the presence of Salmonella on the hides of cattle at slaughter.

Impact of transportation and lairage on hide contamination with Escherichia coli O157 in finished beef cattle.

Transportation of cattle from the feedlot to the slaughter plant could influence hide contamination of Escherichia coli O157. A study was initiated to investigate the influence of transportation and lairage on shedding and hide contamination of E. coli O157. Fecal and hide samples were obtained from 40 pens of harvest-ready beef cattle at the feedlot prior to transport and again at the slaughter plant immediately after slaughter. Potential risk factors for hide contamination at the feedlot, during transport, and at slaughter were evaluated. A multilevel Poisson regression model was used to evaluate if transportation and lairage were associated with hide contamination by E. coli O157 in finished beef cattle. Lots of cattle held in E. coli O157-positive lairage pens had eight times greater risk of having positive slaughter hide samples compared with cattle held in culture-negative pens (relative risk, 8.0; 95% confidence interval, 1.6 to 38.8). Lots of cattle that were held in lairage pens contaminated with feces had three times greater risk for positive slaughter hide samples compared with cattle held in clean pens (relative risk, 3.1; 95% confidence interval, 1.2 to 7.9). Lots of cattle that were transported for long distances (> 160.9 km) had twice the risk of having positive hide samples at slaughter compared with cattle transported a shorter distance (relative risk, 2.4; 95% confidence interval, 1.1 to 5.1). These findings suggest that transportation and lairage should be considered in E. coli O157 control strategies.

Post-slaughter traceability.

Traceability programs can cover the whole of life, or parts of it, for individual animals or groups/lots of animals. Of 13 country or community traceability programs for cattle/beef, 11 are mandatory (4 encompass, or are scheduled to encompass, birth to retail; 7 cover birth to slaughter) while 2 are voluntary and encompass birth to slaughter. Of 10 country or community traceability programs for swine/pork, 2 are mandatory (1 covers birth to retail; 1 covers birth to slaughter) while 8 are voluntary. Of 6 country or community traceability programs for sheep/sheep-meat, 3 are mandatory (1 encompasses birth to retail; 2 encompass birth to slaughter) while 3 are voluntary. Mandatory birth to retail programs that include "post-slaughter individual animal identification (IAID) traceability" have been implemented for cattle/beef, swine/pork and sheep/sheep-meat by the European Union and for cattle/beef by Japan. Many of the voluntary as well as mandatory, birth to slaughter traceability programs for all three species are presumed (though that is not specified) to include "post-slaughter group/lot identification (GLID) traceability" - e.g., those qualifying products for shipment to the European Union. "Post-slaughter IAID traceability" can be accomplished in very-small, small, medium, large and very-large packing plants using single-carcass processing units, tagging and separation/segregation, and/or deoxyribonucleic acid (DNA) fingerprinting technology but all of these approaches are time-consuming and costly; and, to-date, in most countries, there has been no reason compelling enough to cause industry to adopt such protocols or technology.

Modeling the effect of inoculum size and acid adaptation on growth/no growth interface of Escherichia coli O157:H7.

The objective of this study was to model with logistic regression the growth/no growth interface of different initial inoculation levels (10(1), 10(3) and 10(5) CFU/ml; study 1), or nonadapted vs acid-adapted (study 2) Escherichia coli O157:H7 as influenced by pH, NaCl concentration and incubation temperature. Study 1 was conducted with a mixture of four E. coli O157:H7 strains grown (35 degrees C, 24 h) in tryptic soy broth (TSB). Study 2 was conducted with the same mixture of four E. coli O157:H7 strains grown (35 degrees C, 24 h) in glucose-free TSB with 1% added glucose (final pH 4.83), or in diluted lactic acid meat decontamination runoff fluids (washings; final pH 4.92), or nonadapted cultures prepared in glucose-free TSB (final pH 6.45), or in water washings (final pH 6.87). Parameters included incubation temperature (10-35 degrees C), pH (3.52-7.32), and NaCl concentration (0-10% w/v). Growth responses were evaluated for 60 days turbidimetrically (610 nm) every 5 days in 160 (study 1) and 360 (study 2) combinations in quadruplicate samples, with a microplate reader. The lower the initial inoculum the higher were the minimum pH and a(w) values permitting growth. Differences in the pH and a(w) growth limits among inoculum concentrations increased at 15 and 10 degrees C. Acid-adapted cultures were able to grow at lower pH than nonadapted cultures, while at temperatures below 25 degrees C, growth initiation of nonadapted cultures stopped at higher a(w) compared to acid-adapted cultures for the whole pH range of 3.52 to 7.32. A comparison with available data indicated that our model for acid-adapted E. coli O157:H7 in different environments may provide representative growth probabilities covering both nonadapted and stress-adapted contaminants.

Decontamination of beef subprimal cuts intended for blade tenderization or moisture enhancement.

The prevalence of Escherichia coli O157:H7 on beef subprimal cuts intended for mechanical tenderization was evaluated. This evaluation was followed by the assessment of five antimicrobial interventions at minimizing the risk of transferring E. coli O157:H7 to the interior of inoculated subprimal cuts during blade tenderization (BT) or moisture enhancement (ME). Prevalence of E. coli O157:H7 on 1,014 uninoculated beef subprimals collected from six packing facilities was 0.2%. Outside round pieces inoculated with E. coli O157:H7 at 10(4) CFU/100 cm2 were treated with (i) no intervention, (ii) surface trimming, (iii) hot water (82 degrees C), (iv) warm 2.5% lactic acid (55 degrees C), (v) warm 5.0% lactic acid (55 degrees C), or (vi) 2% activated lactoferrin followed by warm 5.0% lactic acid (55 degrees C) and then submitted to BT or ME. Prevalence (n=196) of internalized (BT and ME) E. coli O157:H7 was 99%. Enumeration of E. coli 0157:H7 (n=192) revealed mean surface reductions of 0.93 to 1.10 log CFU/100 cm2 for all antimicrobial interventions. E. coli O157:H7 was detected on 3 of the 76 internal BT samples and 73 of the 76 internal ME samples. Internal ME samples with no intervention had significantly higher mean E. coli O157:H7 populations than did those internal samples treated with an intervention, but there were no significant differences in E. coli O157:H7 populations among internal BT samples. Results of this study demonstrate that the incidence of E. coli O157:H7 on the surface of beef subprimal cuts is low and that interventions applied before mechanical tenderization can effectively reduce the transfer of low concentrations of E. coli O157:H7 to the interior of beef subprimal cuts.

Rapid Communication: 16S ribosomal ribonucleic acid characterization of liver abscesses in feedlot cattle from three states in the United States.

Liver abscesses are a major economic burden to beef producers. Although a few causative organisms have been cultured from purulent material, the full polymicrobial diversity of liver abscesses has not been reported. The objective of this study was to characterize purulent material collected from liver abscess in beef cattle produced in different production systems in 3 cattle producing states in the United States using 16S rRNA gene sequencing. Differences between purulent material microbial communities among geographic region of feeding and application of a common antimicrobial were also investigated. Cattle included in the study were fed in California (dairy type) and Colorado and Texas (both beef type). Liver abscesses from a cross section of feedlots, geographic areas, and tylosin phosphate-administered groups were collected at harvest; DNA from 34 liver abscess samples was extracted; and the V4 region of the 16S rRNA gene was amplified and sequenced. Sequences were classified into 5 phyla, 13 classes, and 17 orders in the domain Bacteria. The phyla identified included Bacteroidetes (35.2% of reads), Proteobacteria (28.6%), Fusobacteria (18.2%), Firmicutes (12.4%), and Actinobacteria (5.5%). Sequences matching the genera and , which have previously been identified as causative agents in liver abscesses, were both present in the abscess bacterial communities at a relative abundance of 15.1 and 3.2%, respectively, of the overall relative abundance. Furthermore, 3 of the most common phyla were Gram-negative bacteria. An analysis-of-similarities test was conducted on Euclidean distances to assess differences between cattle treated and not treated with tylosin as well as to assess differences between geographic regions. Geographical region and treatment with tylosin did affect the microbiome ( = 0.002 and = 0.026 respectively); however, a more robust sample scheme is needed to explore these differences. To our knowledge, this is the first publication describing the complex community of liver purulent material using next generation sequencing in cattle. These data provide a framework for research on a more targeted approach to liver abscess prevention and treatment.

National Beef Quality Audit-2016: Phase 1, Face-to-face interviews.

The National Beef Quality Audit (NBQA) is conducted every 5 yr and was most recently again conducted in 2016. Face-to-face interviews gauged progress in quality associated with live cattle production using procedures first utilized in NBQA 2011. The 2016 NBQA was the first in which interviews concerning fed steers and heifers were combined with an audit of market cow and bull beef. Face-to-face interviews were designed to illicit definitions for beef quality, estimate willingness to pay (WTP) for quality attributes, establish relative importance rankings for important quality factors, and assess images, strengths, weaknesses, potential threats, and shifting trends in the beef industry since the 2011 audit. Individuals making purchasing decisions in 5 market sectors of the steer/heifer and cow/bull beef supply chain were interviewed, including packers (n = 36), retailers (including large and small supermarket companies and warehouse food sales companies; n = 35), food service operators (including quick-serve, full-service, and institutional establishments; n = 29), further processors (n = 64), and peripherally-related government and trade organizations (GTO; n = 30). Face-to-face interviews were conducted between January and November of 2016 using a designed dynamic routing system. Definitions (as described by interviewees) for 7 pre-determined quality factors, including: (1) How and where the cattle were raised, (2) Lean, fat, and bone, (3) Weight and size, (4) Visual characteristics, (5) Food safety, (6) Eating satisfaction, and (7) Cattle genetics were recorded verbatim and categorized into similar responses for analysis. Compared to NBQA-2011, a higher percentage of companies were willing to pay premiums for guaranteed quality attributes, but overall were willing to pay lower average premiums than the companies interviewed in 2011. Food safety had the highest share of preference among all interviewees, generating a double-digit advantage over any other quality factor. The 2 beef industries have an overall positive image among interviewees, and despite lingering weaknesses, product quality continued to be at the forefront of the strengths category for both steer and heifer beef and market cow and bull beef.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products.

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products.

The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments.

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers.

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

Determining the prevalence of Escherichia coli O157 in cattle and beef from the feedlot to the cooler.

Prevalence of Escherichia coli O157 on cattle entering the slaughter floor may range from 10 to > 70%. This study was conducted to determine the effect of E. coli O157 prevalence in fecal pats collected from feedlot pen floors on subsequent E. coli O157 prevalence on carcasses at various points in the slaughter process. Fecal pats from the feedlot pen floor were collected within 3 days before slaughter. During cattle processing at the slaughter facility, additional samples were collected from the hide, from the colon, and from the carcasses before and after evisceration and after final decontamination. Of 15 lots (a group of cattle from the same pen from a feedlot) sampled, 87% had at least one positive fecal pat from the feedlot floor, 47% had a positive hide sample, 73% had a positive colon/fecal sample, and 47% had a positive carcass sample preevisceration; however, only 8% of lots had a positive carcass sample postevisceration or after final intervention. Of the total samples tested (n = 1,328), 24.7, 14.7, 27.6, 10.1, 1.4, and 0.3% of fecal pats from the feedlot floor, hide, colon, preevisceration, postevisceration, and final intervention samples, respectively, were positive for E. coli O157. Pens with greater than 20% positive fecal pats from the feedlot floor had 25.5% hide, 51.4% colon, and 14.3, 2.9, and 0.7% carcass samples positive at preevisceration, at postevisceration, and after final intervention, respectively. However, fecal pats from feedlot floor samples that contained less than 20% positive fecal samples showed lower pathogen prevalence, with 5.0% hide, 7.5% colon, and 6.3, 0, and 0% carcass positive samples at preevisceration, postevisceration, and post-final intervention, respectively. Data from this study can be used as part of risk assessment processes in order to identify mitigation strategies to minimize prevalence of E. coli O157 on fresh beef carcasses.

Molecular characterization of Escherichia coli O157:H7 hide contamination routes: feedlot to harvest.

This study was conducted to identify the origin of Escherichia coli O157:H7 contamination on steer hides at the time of harvest. Samples were collected from the feedlot, transport trailers, and packing plant holding pens and from the colons and hides of feedlot steers. A total of 50 hide samples were positive for E. coli O157:H7 in two geographical locations: the Midwest (25 positive hides) and Southwest (25 positive hides). Hide samples were screened, and the presence of E. coli O157: H7 was confirmed. E. coli O157:H7 isolates were fingerprinted by pulsed-field gel electrophoresis and subjected to multiplex PCR procedures for amplification of E. coli O157:H7 genes stx1, stx2, eaeA, fliC, rfbEO157, and hlyA. Feedlot water trough, pen floor, feed bunk, loading chute, truck trailer side wall and floor, packing plant holding pen floor and side rail, and packing plant cattle drinking water samples were positive for E. coli O157:H7. Pulsed-field gel electrophoresis banding patterns were analyzed after classifying isolates according to the marker genes present and according to packing plant. In this study, hide samples positive for E. coli O157:H7 were traced to other E. coli O157:H7-positive hide, colon, feedlot pen floor fecal, packing plant holding pen drinking water, and transport trailer side wall samples. Links were found between packing plant side rails, feedlot loading chutes, and feedlot pens and between truck trailer, different feedlots, and colons of multiple cattle. This study is the first in which genotypic matches have been made between E. coli O157:H7 isolates obtained from transport trailer side walls and those from cattle hide samples within the packing plant.

Effects of United States Department of Agriculture carcass maturity on sensory attributes of steaks produced by cattle representing two dental age classes.

This study examined the effects of USDA carcass maturity on sensory properties of LM steaks produced by cattle representing 2 dental age classes. Carcasses identified for use in the experiment were produced by steers and heifers classified as either <30 mo of age (MOA) or ≥30 MOA at the time of slaughter using dentition. Within each dental age class, carcasses were selected to represent 2 maturity groups and 3 marbling categories, resulting in 12 dental age × maturity × marbling subclasses, each consisting of 50 carcasses. Maturity groups consisted of carcasses classified by USDA graders as either A to A (A) overall maturity or B to D (B-D) overall maturity; marbling categories consisted of carcasses with instrument marbling scores of Slight to Slight (SL), Small to Small (SM), or Modest to Moderate (MT-MD). Carcasses were selected in pairs so that each carcass chosen to represent the B-D-maturity group was paired with an A-maturity carcass of the same sex and marbling score (±50 marbling units). Strip loin (LM) steaks were obtained from both sides of each carcass. After a 14-d aging period, 1 LM steak was measured for Warner-Bratzler shear force (WBSF) and slice shear force (SSF), whereas the other LM steak was used for sensory analysis by a trained descriptive attribute panel. No differences ( > 0.05) in LM tenderness, juiciness, or flavor were detected between carcass maturity groups in either dental age class. Advanced dental age (≥30 MOA), however, was associated with more intense ( < 0.05) grassy and bloody/serumy flavors and decreased ( < 0.05) tenderness within the SL marbling group. Marbling score effectively stratified carcasses (MT-MD > SM > SL) according to differences ( < 0.0001) in LM tenderness, juiciness, beefy/brothy flavor, and buttery/beef fat flavor. In addition, increased marbling was associated with lesser ( < 0.01) intensities of bloody/serumy, livery/organy, and grassy flavors as well as smaller ( < 0.0001) values for WBSF and SSF. Results of this study suggest that USDA carcass maturity does not effectively identify differences in LM sensory attributes in the population of beef carcasses routinely offered for grading in today's U.S. commercial beef processing facilities.

Effect of packaging during storage time on retail display microbial population of beef strip loins from two different production systems.

Two studies were conducted to evaluate the influence of packaging during storage of strip loins (to simulate export shipment) from steers fattened on intensive grazing systems (Uruguay; UR) or on a high-concentrate diet (United States; US) on retail display life microbial growth. Four or 3 different packaging treatments were applied to UR and US strip loin roasts or steaks during 35 d of storage; treatments were applied 7 d following slaughter. After 35 d of storage, the samples were evaluated during simulated retail display for up to 6 d. In Exp. 1, the treatments were vacuum packaging (VP), low-oxygen modified atmosphere packaging (MAP) with N and CO (MAP/CO), low-oxygen MAP with N plus CO and CO, and VP plus an application of peroxyacetic acid (VP/PAA). In Exp. 2, block 1, the treatments were VP, MAP/CO, and VP with ethyl--lauroyl--arginate HCl incorporated into the film as an antimicrobial agent (VP/AM). In Exp. 2, block 2, the treatments were VP, MAP/CO, MAP/CO, and VP/AM. For retail display, VP treatments were sliced and repackaged in PVC overwrap, and MAP treatments were actually PVC overwrap trays that were removed from a master bag with the prescribed gas treatment. Regardless of production system and packaging treatment, mesophilic and psychrotrophic counts of 6.9 to 7.8 and 6.7 to 7.7 log10 CFU/cm, respectively, were obtained at the end of retail display, except for US samples in Exp. 2 (5.5 to 6.3 log CFU/cm). No differences ( > 0.05) were detected for spp. counts among packaging treatments in US steaks at the end of the display time in Exp.1, whereas, for UR steaks, both MAP treatments had lower ( < 0.05) spp. counts than VP treatments. spp. counts were lower ( < 0.05) in the MAP/CO treatment than in the other 3 treatments in US samples on d 6 of retail display for Exp. 2. At the end of display time and for Exp. 1, US steaks under MAP/CO had greater ( < 0.05) lactic acid bacteria (LAB) counts than samples in both VP treatments; no differences ( > 0.05) among packaging were detected for UR steaks. Both MAP and VP/AM treatments in the US samples for Exp. 2 had lower ( < 0.05) LAB counts on d 6 of display than the VP treatment, but no differences ( > 0.05) were found among packaging treatments for the UR samples. To maximize shelf life (storage and display life) of exported fresh beef, it is critical to minimize bacterial populations during processing and storage.