RESUMEN
Nanoparticles are promising mediators to enable nasal systemic and brain delivery of active compounds. However, the possibility of reaching therapeutically relevant levels of exogenous molecules in the body is strongly reliant on the ability of the nanoparticles to overcome biological barriers. In this work, three paradigmatic nanoformulations vehiculating the poorly soluble model drug simvastatin were addressed: (i) hybrid lecithin/chitosan nanoparticles (LCNs), (ii) polymeric poly-ε-caprolactone nanocapsules stabilized with the nonionic surfactant polysorbate 80 (PCL_P80), and (iii) polymeric poly-ε-caprolactone nanocapsules stabilized with a polysaccharide-based surfactant, i.e., sodium caproyl hyaluronate (PCL_SCH). The three nanosystems were investigated for their physicochemical and structural properties and for their impact on the biopharmaceutical aspects critical for nasal and nose-to-brain delivery: biocompatibility, drug release, mucoadhesion, and permeation across the nasal mucosa. All three nanoformulations were highly reproducible, with small particle size (â¼200 nm), narrow size distribution (polydispersity index (PI) < 0.2), and high drug encapsulation efficiency (>97%). Nanoparticle composition, surface charge, and internal structure (multilayered, core-shell or raspberry-like, as assessed by small-angle neutron scattering, SANS) were demonstrated to have an impact on both the drug-release profile and, strikingly, its behavior at the biological interface. The interaction with the mucus layer and the kinetics and extent of transport of the drug across the excised animal nasal epithelium were modulated by nanoparticle structure and surface. In fact, all of the produced nanoparticles improved simvastatin transport across the epithelial barrier of the nasal cavity as compared to a traditional formulation. Interestingly, however, the permeation enhancement was achieved via two distinct pathways: (a) enhanced mucoadhesion for hybrid LCN accompanied by fast mucosal permeation of the model drug, or (b) mucopenetration and an improved uptake and potential transport of whole PCL_P80 and PCL_SCH nanocapsules with delayed boost of permeation across the nasal mucosa. The correlation between nanoparticle structure and its biopharmaceutical properties appears to be a pivotal point for the development of novel platforms suitable for systemic and brain delivery of pharmaceutical compounds via intranasal administration.
Asunto(s)
Administración Intranasal/métodos , Materiales Biocompatibles/química , Nanocápsulas/química , Sistema de Administración de Fármacos con Nanopartículas/química , Mucosa Nasal/efectos de los fármacos , Simvastatina/administración & dosificación , Simvastatina/química , Animales , Transporte Biológico , Caproatos/química , Línea Celular , Supervivencia Celular/efectos de los fármacos , Quitosano/química , Liberación de Fármacos , Humanos , Ácido Hialurónico/análogos & derivados , Ácido Hialurónico/química , Lactonas/química , Lecitinas/química , Mucosa Nasal/metabolismo , Tamaño de la Partícula , Polisorbatos/química , Conejos , Solubilidad , Tensoactivos/química , PorcinosRESUMEN
(R)-Oxyphylla A, a natural product isolated from Alpinia oxyphylla Miquel as a food and medicinal plant, has been reported previously as a novel chiral compound that possesses a potential therapeutic value for Parkinson's disease (PD). A chiral high-performance liquid chromatography-multiple reaction monitoring-mass spectrometry method was developed to separate oxyphylla A enantiomers and to identify the presence of natural (S)-oxyphylla A for the first time. Twelve samples of dried A. oxyphylla fruits were analyzed in which a large variation in the abundance of enantiomers was observed. Moreover, (S)-oxyphylla A was less abundant in all tested samples, whereas fruits harvested from Hainan and Guangdong tended to have relatively higher total concentrations of enantiomers. Additionally, enantiomers exhibited comparable neuroprotective effects in the zebrafish model of PD without observed toxicity phenotype. The optimized enantioseparation method will be crucial for the quality control of A. oxyphylla and research on bioactivities facilitates the development of oxyphylla A as a potential therapeutic for neurodegenerative diseases.
Asunto(s)
Alpinia/química , Caproatos/administración & dosificación , Caproatos/química , Cresoles/administración & dosificación , Cresoles/química , Fármacos Neuroprotectores/administración & dosificación , Fármacos Neuroprotectores/química , Enfermedad de Parkinson/tratamiento farmacológico , Extractos Vegetales/administración & dosificación , Extractos Vegetales/química , Animales , Cromatografía Líquida de Alta Presión , Femenino , Frutas/química , Humanos , Masculino , Espectrometría de Masas , Pez CebraRESUMEN
In this study, we tested whether the extent of drug presence in the heart contributes to the elevated cardiovascular risk of nonsteroidal anti-inflammatory drugs (NSAIDs). A fluorescently tagged nanoformulation of an NSAID with high cardiovascular (CV) risk (diclofenac) was developed as diclofenac ethyl ester (DFEE) encapsulated in traceable (cyanine-5.5-labeled) polymeric micelles (DFEE-TM) based on methoxypoly(ethylene oxide)-block-poly(ε-caprolactone)(PEO-b-PCL) (MW, 5000:3500 g/mol). Diclofenac pharmacokinetics and tissue distribution, as well as ex vivo near-infrared images of organs and whole bodies, were compared between healthy rats and rats with adjuvant arthritis (AA) following the administration of a single intravenous (iv) dose of DFEE-TM. Moreover, the biodistribution and antiarthritic activity of DFEE-TM were compared with those of free diclofenac (once-daily intraperitoneal, ip, 10 mg/kg for 7 days). The concentration ratios of cytochrome-P450-mediated cardiotoxic (20-hydroxyeicosatetraenoic acid) over cardioprotective (epoxyeicosatrienoic acids) metabolites of arachidonic acid (ArA) in the heart, kidneys, and plasma were measured as markers of cardiotoxicity. The nanocarrier was found in the joints of AA, but not in those of healthy rats. Both free diclofenac and DFEE-TM comparably controlled AA. Diclofenac delivery via PEO-b-PCL micelles reduced the accumulation of diclofenac in the heart of AA rats. Despite similar antiarthritic activity, the polymeric micellar formulation showed a reduction in the ratio of cardiotoxic-over-cardioprotective eicosanoids of ArA in the heart and plasma of AA rats. The results showed the positive effect of diclofenac prodrug nanodelivery in changing the normal biodistribution of diclofenac away from the heart, leading to lowered diclofenac-induced biomarkers of cardiotoxicity in the heart and plasma of AA rats.
Asunto(s)
Ácido Araquidónico/metabolismo , Artritis Experimental/tratamiento farmacológico , Artritis Experimental/metabolismo , Sistema Enzimático del Citocromo P-450/metabolismo , Diclofenaco/efectos adversos , Diclofenaco/farmacología , Corazón/efectos de los fármacos , Animales , Antiinflamatorios no Esteroideos/efectos adversos , Antiinflamatorios no Esteroideos/farmacología , Caproatos/química , Portadores de Fármacos/química , Ácidos Hidroxieicosatetraenoicos/química , Lactonas/química , Masculino , Micelas , Nanopartículas/química , Poliésteres/química , Polímeros/química , Ratas , Ratas Sprague-Dawley , Distribución TisularRESUMEN
BACKGROUND AND OBJECTIVE: Encapsulation is an effective method to keep the quality of and avoid changes in flavors or essential oils due to oxidation, heating, volatilization, or chemical interactions. This study aims to microencapsulate key flavorings by traditional wall materials, namely, gum arabic (GA), maltodextrin (MD) and sodium caseinate (SC) and evaluate the effects of different wall materials on the properties of the flavor microcapsules. MATERIALS AND METHODS: The emulsions of flavor compounds (linalool, citral, orange oil, allyl caproate and isoamyl acetate) were prepared using GA, SC and MD as carriers with different concentrations and then encapsulated in powder form by a spray dryer. Physical properties, including encapsulation efficiency, viscosity, emulsion stability and moisture, were studied before and after the spray drying process. Moreover, the morphology and extent of the nonenzymatic browning (NEB) of powder particles were performed using a scanning electron microscope (SEM) and a chroma meter. The effect of encapsulation on flavor retention and chemical composition was evaluated using gas chromatography-mass spectrometry (GC-MS). RESULTS: Orange oil shows the maximum retention efficiency (84.5-97.9%), whereas isoamyl acetate is less retained during drying (44.4-72.5%) compared with other volatile compounds. Increasing the concentration of GA provides the highest retention for all aroma compounds and improves the viscosity and the emulsion stability of spray-dried powder. The presence of MD as the main encapsulating agent enables the formation of several homogeneous capsules with a good spherical shape and a smooth surface, according to SEM. The NEB is observed intensively in encapsulated samples containing citral and orange oils, whereas the least browning occurs in isoamyl acetate microcapsules. CONCLUSION: Wall material formulation affects the retention, morphology and physical properties of the encapsulated flavors, which can be used in food or nutraceutical powder premixes.
Asunto(s)
Caseínas/química , Aromatizantes/química , Goma Arábiga/química , Polisacáridos/química , Monoterpenos Acíclicos/química , Caproatos/química , Cápsulas , Desecación , Emulsiones , Cromatografía de Gases y Espectrometría de Masas , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Pentanoles/química , Aceites de Plantas/química , Polvos , ViscosidadRESUMEN
The increasing prevalence of end-stage renal disease and persistent shortage of donor organs call for alternative therapies for kidney patients. Dialysis remains an inferior treatment as clearance of large and protein-bound waste products depends on active tubular secretion. Biofabricated tissues could make a valuable contribution, but kidneys are highly intricate and multifunctional organs. Depending on the therapeutic objective, suitable cell sources and scaffolds must be selected. This study provides a proof-of-concept for stand-alone kidney tubule grafts with suitable mechanical properties for future implantation purposes. Porous tubular nanofiber scaffolds are fabricated by electrospinning 12%, 16%, and 20% poly-ε-caprolactone (PCL) v/w (chloroform and dimethylformamide, 1:3) around 0.7 mm needle templates. The resulting scaffolds consist of 92%, 69%, and 54% nanofibers compared to microfibers, respectively. After biofunctionalization with L-3,4-dihydroxyphenylalanine and collagen IV, 10 × 106 proximal tubule cells per mL are injected and cultured until experimental readout. A human-derived cell model can bridge all fiber-to-fiber distances to form a monolayer, whereas small-sized murine cells form monolayers on dense nanofiber meshes only. Fabricated constructs remain viable for at least 3 weeks and maintain functionality as shown by inhibitor-sensitive transport activity, which suggests clearance capacity for both negatively and positively charged solutes.
Asunto(s)
Células Epiteliales/citología , Túbulos Renales Proximales/citología , Túbulos Renales Proximales/cirugía , Ingeniería de Tejidos/métodos , Andamios del Tejido , Trasplantes/crecimiento & desarrollo , Materiales Biocompatibles/uso terapéutico , Caproatos/química , Proliferación Celular , Células Cultivadas , Humanos , Fallo Renal Crónico/cirugía , Lactonas/química , PolímerosRESUMEN
In this study, chlorhexidine-loaded poly(ε-caprolactone) nanospheres (CHX-NS) were prepared and successfully coated on the urinary catheters. Properties of CHX-NS were evaluated including drug loading content and the nanosphere size. Effects of different lyoprotectants for long-term storage of CHX-NS were also investigated. In vitro release study and antibacterial activity were also conducted using 20 cycles coated-urinary catheters. Results showed that the high-pressure emulsification-solvent evaporation technique provided the drug loading content at 1.14 ± 0.16% and the size of nanospheres was 152 ± 37 nm. The suitable lyoprotectant for long-term storage of CHX-NS was sucrose which provided noticeably no aggregation at the degree of reconstitution at 89.95%. The amount of CHX loading on coated catheters was at 4.55 ± 0.31 mg. Drug release from the coated catheters in artificial urine could be prolonged up to 2 weeks and bacteria proliferation was inhibited up to 14 days. These results suggest that the antimicrobial activity of CHX-NS reduces the adherence of the uropathogens to the catheter surface. Chlorhexidine-loaded polymeric nanospheres were fabricated which can be successfully coated on urinary catheters. These systems have potential use for prolonged antimicrobial applications.
Asunto(s)
Antibacterianos/química , Antiinfecciosos Locales/química , Caproatos/química , Clorhexidina/química , Lactonas/química , Nanosferas/química , Catéteres Urinarios , Antibacterianos/administración & dosificación , Antiinfecciosos Locales/administración & dosificación , Caproatos/administración & dosificación , Clorhexidina/administración & dosificación , Evaluación Preclínica de Medicamentos/métodos , Escherichia coli/efectos de los fármacos , Escherichia coli/fisiología , Liofilización/métodos , Lactonas/administración & dosificación , Pruebas de Sensibilidad Microbiana/métodos , Nanosferas/administración & dosificación , Catéteres Urinarios/microbiologíaRESUMEN
Biodegradable polymers with antibacterial properties are highly desirable materials for active food packaging applications. Thymol, a dietary monoterpene phenol with a strong antibacterial activity is abundant in plants belonging to the genus Thymus. This study presents two approaches for supercritical CO2 impregnation of poly(lactic acid)(PLA)/poly(ε-caprolactone)(PCL) blended films to induce antibacterial properties of the material: (i) a batch impregnation process for loading pure thymol, and (ii) an integrated supercritical extraction-impregnation process for isolation of thyme extract and its incorporation into the films, operated in both batch or semi-continuous modes with supercritical solution circulation. The PCL content in films, impregnation time and CO2 flow regime were varied to maximize loading of the films with thymol or thyme extract with preserving films' structure and thermal stability. Representative film samples impregnated with thymol and thyme extract were tested against Gram (-) (Escherichia coli) and Gram(+) (Bacillus subtilis) model strains, by measuring their metabolic activity and re-cultivation after exposure to the films. The film containing thymol (35.8â¯wt%) showed a strong antibacterial activity leading to a total reduction of bacterial cell viability. Proposed processes enable fast, controlled and organic solvent-free fabrication of the PLA/PCL films containing natural antibacterial substances at moderately low temperature, with a compact structure and a good thermal stability, for potential use as active food packaging materials.
Asunto(s)
Antibacterianos/farmacología , Dióxido de Carbono , Embalaje de Alimentos/métodos , Extractos Vegetales/farmacología , Poliésteres/química , Timol/farmacología , Bacillus subtilis/efectos de los fármacos , Caproatos/química , Escherichia coli/efectos de los fármacos , Lactonas/química , Aceites Volátiles/farmacología , Polímeros/química , Thymus (Planta) , Factores de TiempoRESUMEN
The propolis produced by bees are used in alternative medicine for treating inflammation, and infections, presumably due to its antioxidant properties. In this context, five propolis from México were investigated to determine their inhibitory lipid peroxidation properties. The ethyl acetate extract from a red propolis from Chiapas State (4-EAEP) was the most potent (IC50 = 1.42 ± 0.07 µg/mL) in the TBARS assay, and selected for further studies. This extract afforded two new compounds, epoxypinocembrin chalcone (6), and an ε-caprolactone derivative (10), as well as pinostrobin (1), izalpinin (2), cinnamic acid (3), pinocembrin (4), kaempherol (5), 3,3-dimethylallyl caffeate in mixture with isopent-3-enyl caffeate (7a + 7b), 3,4-dimethoxycinnamic acid (8), rhamnetin (9) and caffeic acid (11). The HPLC profile, anti-mycobacterial, and antioxidant properties of this extract was also determined. Most of the isolated compounds were also tested by inhibition of reactive oxygen species (ROS) in challenged mouse bone marrow-derived mast cells (BMMCs), and DPPH. Their anti-inflammatory activity was evaluated by TPA, and MPO (myeloperoxidase) activity by ear edema test in mice. The most potent compounds were 7a + 7b in the TBARS assay (IC50 = 0.49 ± 0.06 µM), and 2 which restored the ROS baseline (3.5 µM). Our results indicate that 4-EAEP has anti-oxidant, and anti-inflammatory properties due to its active compounds, suggesting it has anti-allergy and anti-asthma potential.
Asunto(s)
Antiinflamatorios/química , Antiinflamatorios/farmacología , Antioxidantes/química , Antioxidantes/farmacología , Caproatos/química , Chalconas/química , Lactonas/química , Própolis/química , Animales , Antibacterianos/química , Antibacterianos/farmacología , Degranulación de la Célula/efectos de los fármacos , Degranulación de la Célula/inmunología , Chlorocebus aethiops , Cromatografía Líquida de Alta Presión , Espectroscopía de Resonancia Magnética , Mastocitos/efectos de los fármacos , Mastocitos/inmunología , Mastocitos/metabolismo , México , Ratones , Estructura Molecular , Peroxidasa/antagonistas & inhibidores , Peroxidasa/metabolismo , Extractos Vegetales/química , Extractos Vegetales/farmacología , Própolis/metabolismo , Especies Reactivas de Oxígeno , Espectrometría de Masa por Ionización de Electrospray , Células VeroRESUMEN
A new ferulic acid ester, 6-feruloyloxyhexanoic acid (1), was isolated along with 10 known ones (2-11), from the concentrated water extract of Rhodiola wallichiana var. cholaensis. Their chemical structures were elucidated on the basis of extensive spectroscopic methods including Two-dimensional nuclear magnetic resonance (2D NMR) experiments. Compound 3 was isolated from this plant for the first time. The protective effects against H2O2-induced myocardial cell injury in cultured H9c2 cells were also evaluated. Compounds 1, 5 and 7-11 provided significant protective effects on H2O2-induced H9c2 cells injury at the concentration of 25 µg/mL. And the protective effects of compound 1 was also investigated by the oxygen-glucose deprivation/reperfusion (OGD/R) tests.
Asunto(s)
Caproatos/farmacología , Cardiotónicos/farmacología , Ácidos Cumáricos/farmacología , Rhodiola/química , Animales , Antioxidantes/química , Antioxidantes/farmacología , Caproatos/administración & dosificación , Caproatos/química , Cardiotónicos/administración & dosificación , Cardiotónicos/química , Células Cultivadas , Ácidos Cumáricos/administración & dosificación , Ácidos Cumáricos/química , Relación Dosis-Respuesta a Droga , Ésteres/administración & dosificación , Ésteres/química , Ésteres/farmacología , Peróxido de Hidrógeno/toxicidad , Espectroscopía de Resonancia Magnética , Estructura Molecular , Miocitos Cardíacos/citología , Miocitos Cardíacos/efectos de los fármacos , Extractos Vegetales/química , RatasRESUMEN
Phosphonium ionic liquid (IL) combined with 2-ethylhexanoate counter anion has been used as interfacial agent of layered double hydroxide (LDH). First, the intercalation of hexanoate anion between the LDH layers was confirmed by thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Then, this thermally stable organophilic LDH was introduced at different amount (1, 3 and 5wt%) into pectin matrix leading to an increase of the thermal stability of the resulting nanocomposites (+35-40°C). In addition, the good distribution of the modified LDH led to an increase of the mechanical performances through the elastic moduli (+60%) as well as a significant increase of the water barrier properties of two orders of magnitude for the pectin containing 5wt% of LDH-Ionic Liquid.
Asunto(s)
Hidróxidos/química , Líquidos Iónicos/química , Compuestos Organofosforados/química , Pectinas/química , Caproatos/química , Estructura Molecular , Nanocompuestos/química , TemperaturaRESUMEN
Ferulic, caffeic, sinapic, and coumaric acids, belonging to the class of hydroxycinnamic acids (HAs), are bioactive polyphenols widespread in the plant kingdom and present in the human diet. Due to their biological properties and effects in the prevention of various diseases associated with oxidative stress, HAs can be exploited for attractive nutraceutical applications. Starting from this and in order to increase bioaccessibility, we encapsulated HAs in lipid-core nanocapsules (NCs) based on a biodegradable and biocompatible poly(ε-caprolactone) polymer. The results showed that nanoparticles loaded with hydroxycinnamic acids (HA-NCs) have diameter of 224-253â¯nm, encapsulation efficiency of 53-78%, and are stable over time (30â¯days). In vitro tests evidenced that NCs are able to preserve HAs in the gastric simulated fluid and release them in the intestinal simulated fluid. The delivery system developed could be employed to create novel functional foods.
Asunto(s)
Ácidos Cumáricos/química , Lípidos/química , Nanocápsulas/química , Caproatos/química , Suplementos Dietéticos/análisis , Alimentos Funcionales/análisis , Lactonas/química , Polímeros/químicaRESUMEN
We elucidate the effects of incorporating surfactants into electrospun poly (É-caprolactone) (PCL) scaffolds on network homogeneity, cellular adherence and osteogenic differentiation. Lecithin was added with a range of concentrations to PCL solutions, which were electrospun to yield functionalized scaffolds. Addition of lecithin yielded a dose-dependent reduction in scaffold hydrophobicity, whilst reducing fiber width and hence increasing specific surface area. These changes in scaffold morphology were associated with increased cellular attachment of Saos-2 osteoblasts 3-h postseeding. Furthermore, cells on scaffolds showed comparable proliferation over 14 days of incubation to TCP controls. Through model-based interpretation of image analysis combined with gravimetric estimates of porosity, lecithin is shown to reduce scaffold porosity and mean pore size. Additionally, lecithin incorporation is found to reduce fiber curvature, resulting in increased scaffold specific elastic modulus. Low concentrations of lecithin were found to induce upregulation of several genes associated with osteogenesis in primary mesenchymal stem cells. The results demonstrate that functionalization of electrospun PCL scaffolds with lecithin can increase the biocompatibility and regenerative potential of these networks for bone tissue engineering applications. © 2017 The Authors Journal of Biomedical Materials Research Part A Published by Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2865-2874, 2017.
Asunto(s)
Caproatos/química , Lactonas/química , Lecitinas/química , Osteoblastos/citología , Andamios del Tejido/química , Adhesión Celular , Línea Celular , Proliferación Celular , Células Cultivadas , Módulo de Elasticidad , Humanos , Células Madre Mesenquimatosas/citología , Nanofibras/química , Osteogénesis , Porosidad , Resistencia a la Tracción , Ingeniería de Tejidos/métodosRESUMEN
A combination of palm olein (POl) and fructose was used as carbon source for the biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] by recombinant Cupriavidus necator Re2058/pCB113. Cultures grown using 5g/L PO alone as carbon source produced cell dry weight (CDW) of 5.13g/L, 67% PHA/CDW and accumulated a copolymer containing 27mol% 3HHx in shake flask cultures. When cultures were grown in 5g/L fructose alone as the carbon source they produced CDW of 2.32g/L, 11% PHA/CDW and accumulated only poly(3-hydroxybutyrate) [P(3HB)] homopolymer. When the cells were cultured in 5g/L POl in combination with 7g/L fructose, CDW of 7.41g/L and 80% PHA/CDW was obtained with 17mol% 3HHx monomer fraction. Biosynthesis was carried out using a 13L fermenter to study the accumulation of 3HHx monomer fraction in the bacterial cells at different time point. The molecular weights of P(3HB-co-3HHx) with 4-15mol% 3HHx monomer were in the range between 5.47-6.85×105Da, which were at least two fold higher than previously reported values. Interestingly, the increase in Mw of the copolymer along with the increase in 3HHx molar fraction was observed. The viscoelastic property of the copolymer further confirmed the increase in Mw.
Asunto(s)
Ácido 3-Hidroxibutírico/biosíntesis , Ácido 3-Hidroxibutírico/química , Caproatos/química , Cupriavidus necator/metabolismo , Fructosa/metabolismo , Aceite de Palma/metabolismo , Aciltransferasas/metabolismo , Biotecnología , Cupriavidus necator/enzimología , Peso MolecularRESUMEN
Thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) in the presence of an organic alkali was validated for the compositional analysis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] accumulated in whole bacterial cells. Recombinant Cupriavidus necator Re2058/pCB113 was grown in a batch fermentation with different concentration of palm oil and fructose in order to control the molar fraction of 3HHx in P(3HB-co-3HHx) produced in the cells. Trace amounts (30µg) of freeze-dried cells were directly subjected to THM-GC in the presence of tetramethylammonium hydroxide (TMAH) at 400°C. The obtained chromatograms clearly showed nine characteristic peaks, attributed to the THM products from 3HB and 3HHx units in the polymer chains, without any appreciable interference by the bacterial matrix components. Based on these peak intensities, the copolymer compositions were determined rapidly without using any cumbersome and lengthy sample pretreatment as in conventional GC method. Moreover, the compositions thus obtained were strongly correlated with those by NMR and conventional GC involving solvent extraction.
Asunto(s)
Caproatos/análisis , Técnicas de Química Analítica/métodos , Cromatografía de Gases , Cupriavidus necator/química , Calor , Ácido 3-Hidroxibutírico/química , Caproatos/química , Técnicas de Química Analítica/instrumentación , Fermentación , Hidrólisis , Espectroscopía de Resonancia Magnética , Metilación , Aceite de Palma , Aceites de Plantas/metabolismo , PolímerosRESUMEN
The aim of this study was to evaluate therapeutic potential of curcumin-loaded poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) PHBHHx nanoparticles (CUR-NPs) and concanavaline A conjugated curcumin-loaded NPs (ConA-CUR-NPs) for breast cancer treatment. The size and zeta potential of prepared NPs were about 228 ± 5 nm and -23.3 mV, respectively. The entrapment efficiencies of polymer/drug weight ratios, 1.25CUR-NPs, 2.5CUR-NPs, 5CUR-NPs, ConA-1.25CUR-NPs, ConA-2.5CUR-NPs and ConA-5CUR-NPs were found to be ≈68, 55, 45, 70, 60 and 51%, respectively. Optimized NPs formulations in the freeze-dried form were assessed with their short-term stability for 30 days of storage at 4 °C and 25 °C. Anticancer activity of ConA-CUR-NPs was proved by MTT assay and reconfirmed by double staining and flow cytometry results. The anticancer activity of ConA-CUR-NPs was measured in human breast cancer cells (MDA-MB 231) in vitro, and the results revealed that the ConA-CUR-NPs had better tumor cells decline activity.
Asunto(s)
Ácido 3-Hidroxibutírico/química , Antineoplásicos/administración & dosificación , Caproatos/química , Concanavalina A/química , Curcumina/administración & dosificación , Nanopartículas/química , Antineoplásicos/farmacología , Mama/efectos de los fármacos , Neoplasias de la Mama/tratamiento farmacológico , Canavalia/química , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Curcumina/farmacología , Preparaciones de Acción Retardada/química , Portadores de Fármacos/química , Femenino , HumanosRESUMEN
BACKGROUND: In this study, soy protein isolate/sugar beet pectin (SPI/SBP) emulsion gels were prepared through an enzymatic gelation process. The effects of emulsifier (SBP, SPI or SPI/SBP complex) and emulsification process on the microstructure, texture, breakdown properties and aroma release behavior of resulting emulsion gels were investigated. RESULTS: Oil emulsification by SBP/SPI complex resulted in a higher amount of emulsifier absorbing on the oil-water interface than by SBP and SPI alone, indicating that a more compact interfacial network was formed. Flocculation of oil droplets was observed and corresponding emulsion gels exhibited lower fracture force and strain when the oil was emulsified by SPI and SBP/SPI complex. Moreover, emulsion gels with small droplets produced a greater quantity of small fragments after mastication. However, microstructure did not have a significant effect on breakdown properties of emulsion gels. Headspace gas chromatography analysis showed that the release rate of ethyl butyrate before and after mastication was significantly lower in emulsion gel with more compact network, but the release of aroma compounds with higher hydrophobicity did not show a significant influence of the microstructure and texture of emulsion gel. CONCLUSION: This finding provides a useful application for designing semi-solid foods with desirable flavor perception. © 2016 Society of Chemical Industry.
Asunto(s)
Beta vulgaris/química , Emulsionantes/química , Aditivos Alimentarios/química , Masticación , Pectinas/química , Raíces de Plantas/química , Proteínas de Soja/química , Butiratos/análisis , Butiratos/química , Caproatos/análisis , Caproatos/química , Caprilatos/análisis , Caprilatos/química , Fenómenos Químicos , Aceite de Maíz/química , Emulsionantes/análisis , Emulsiones , Aditivos Alimentarios/análisis , Geles , Calor , Humanos , Fenómenos Mecánicos , Odorantes , Tamaño de la Partícula , Pectinas/análisis , Sensación , Proteínas de Soja/análisis , Propiedades de Superficie , VolatilizaciónRESUMEN
Incorporation of bioactive glass (BG) particles to synthetic polymer scaffolds is a promising strategy to improve the bioactivity of bioinert materials and to stimulate specific cell responses. In this study, the influence of incorporating BG particles to lactide and caprolactone based porous scaffolds on osteogenic differentiation of adipose-derived stem cells (ASCs) was analyzed. Accordingly, ASCs were seeded on poly(L-lactide) (PLLA), poly(ε-caprolactone) (PCL), or poly(L-lactide-co-ε-caprolactone) (PLCL) scaffolds containing 15 vol % of BG particles in two culture conditions: standard versus osteogenic culture medium. In standard culture medium, incorporation of BG to a PLLA scaffold increased the ALP activity with respect to its unfilled counterpart (ca. 1.2- and a 1.6-fold increase over 7 and 14 days, respectively). Moreover, in all the studied polymers the incorporation of BG induced a slightly higher production of mineralized matrix by ASCs, but the differences observed were not statistically significant. In the osteogenic medium, the effect of BG was masked by the effect of osteogenic supplements in the long-term. However, in the short-term (day 7), BG particles induced an early ALP activity of predifferentiated osteoblasts on PLLA and PCL scaffolds and higher matrix mineralization on PCL scaffolds. In summary, the addition of BG particles to PLLA and PCL scaffolds sustains ASC osteogenic differentiation, facilitates mineralization and induces the formation of a hydroxyapatite layer on the surface of the polymer scaffolds.
Asunto(s)
Caproatos/química , Dioxanos/química , Vidrio/química , Lactonas/química , Células Madre Mesenquimatosas/citología , Osteoblastos/citología , Andamios del Tejido/química , Tejido Adiposo/citología , Técnicas de Cultivo de Célula , Diferenciación Celular , Proliferación Celular , Células Cultivadas , Humanos , Osteogénesis , Tamaño de la PartículaRESUMEN
The treatment of an injured central nervous system using stem-cell-based regenerative medicine still faces considerable hurdles that need to be overcome. Chief among which is the lack of efficient strategies to generate functional neurons from stem cells. The sustained delivery of biochemical cues and synergistic topographical signaling from electrospun nanofibrous scaffolds may be a potential strategy to enhance neuronal differentiation of stem cells for therapeutic purposes. In this study, retinoic acid (RA) and brain-derived neurotrophic factor (BDNF) were encapsulated into a copolymer of ε-caprolactone and ethyl ethylene phosphate to form a multifunctional, electrospun nanofibrous scaffold. Sustained release of RA and BDNF was achieved for at least 7 and 14 days, respectively. Despite lower cumulative release of drugs as compared to bolus delivery to plain nanofibers (at least 2× and 50× lower for RA and BDNF, respectively), nanofiber-mediated delivery of RA and/or BDNF resulted in similar capacity for neuronal differentiation of mouse neural progenitor cells (NPCs). In addition, nanofiber topography significantly increased neuronal differentiation (with BDNF, 47.4% Map2(+) cells on 2D vs. 53.4 to 56.5% on nanofibers, p < 0.05) and reduced glial cell differentiation. BDNF was a more potent inducer of neuronal differentiation than RA. RA supplementation alone resulted in minimal effect on NPC differentiation, and dual supplementation of RA and BDNF did not further enhance the neuronal differentiation of NPCs. Collectively, the results suggest that synergistic effects of nanofiber topography and sustained delivery of RA and/or BDNF may contribute towards the design of a multifunctional artificial stem cell niche for NPC neuronal differentiation.
Asunto(s)
Factor Neurotrófico Derivado del Encéfalo/administración & dosificación , Nanofibras/administración & dosificación , Células-Madre Neurales/efectos de los fármacos , Tretinoina/administración & dosificación , Animales , Caproatos/química , Diferenciación Celular/efectos de los fármacos , Células Cultivadas , Lactonas/química , Ratones Endogámicos C57BL , Microscopía Electrónica de Rastreo , Nanofibras/ultraestructura , Células-Madre Neurales/citología , Neuronas/citologíaRESUMEN
A (R)-3-hydroxyhexanoate (3HH) composition-regulating technology for poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) production was developed using recombinant Cupriavidus necator H16 with butyrate as a co-substrate. A new (R)-3-hydroxyhexanoyl-CoA ((R)-3HH-CoA) synthesis pathway was designed and enhanced by replacing the PHA synthase gene (phaC1) of C. necator by the phaCAcNSDG (encoding the N149S and D171G mutant of PHA synthase from Aeromonas caviae) and deactivation of the phaA gene (encoding (ß-ketothiolase) from C. necator H16 chromosome). The effect of butyrate as co-substrate was assessed in high-cell-density fed-batch cultures of several C. necator mutants, and the 3HH fraction was successfully increased by adding butyrate to the culture. Moreover, overexpression of BktB (encoding the second ß-ketothiolase with broad substrate specificity) enhanced the (R)-3HH-CoA synthesis pathway in the phaA deactivated mutant of C. necator by promoting the condensation of acetyl-CoA and butyryl-CoA into 3-ketohexanoyl-CoA. Consequently, PHBH containing 4.2-13.0 mol% 3HH was produced from butyrate and palm kernel oil by the genetically modified C. necator H16 strains.
Asunto(s)
Ácido 3-Hidroxibutírico/biosíntesis , Ácido 3-Hidroxibutírico/química , Butiratos/metabolismo , Caproatos/química , Caproatos/metabolismo , Cupriavidus necator/metabolismo , Aceites de Plantas/metabolismo , Acetilcoenzima A/metabolismo , Acetil-CoA C-Aciltransferasa/metabolismo , Acilcoenzima A/metabolismo , Aciltransferasas/genética , Aciltransferasas/metabolismo , Aeromonas caviae/enzimología , Técnicas de Cultivo Celular por Lotes , Butiratos/farmacología , Cupriavidus necator/genética , Especificidad por SustratoRESUMEN
Lopinavir (LPV)-loaded poly-ε-caprolactone (PCL) nanoparticles (NPs) were prepared by emulsion solvent evaporation technique. Effects of various critical factors in preparation of loaded NPs were investigated. Box-Behnken design (BBD) was employed to optimize particle size and entrapment efficiency (EE) of loaded NPs. Optimized LPV NPs exhibited nanometeric size (195.3 nm) with high EE (93.9%). In vitro drug release study showed bi-phasic sustained release behavior of LPV from NPs. Pharmacokinetic study results in male Wistar rats indicated an increase in oral bioavailability of LPV by 4-folds after incorporation into PCL NPs. From tissue distribution studies, significant accumulation of loaded NPs in tissues like liver and spleen indicated possible involvement of lymphatic route in absorption of NPs. Mechanistic studies using rat everted gut sac model revealed endocytosis as a principal mechanism of NPs uptake. In vitro rat microsomal metabolism studies demonstrated noticeable advantage of LPV NPs by affording metabolic protection to LPV. These studies indicate usefulness of PCL NPs in enhancing oral bioavailability and improving pharmacokinetic profile of LPV.