RESUMEN
Transition metal dichalcogenides is an emerging 2D semiconducting material group which has excellent physical properties in the ultimately scaled thickness dimension. Specifically, van der Waals heterostructures hold the great promise in further advancing both the fundamental scientific knowledge and practical technological applications of 2D materials. Although 2D materials have been extensively studied for various sensing applications, temperature sensing still remains relatively unexplored. In this work, we experimentally study the temperature-dependent Raman spectroscopy and electrical conductivity of molybdenum disulfide (MoS2) and its heterostructures with platinum dichalcogenides (PtSe2and PtTe2) to explore their potential to become the next-generation temperature sensor. It is found that the MoS2-PtX2heterostructure shows the great promise as the high-sensitivity temperature sensor.
RESUMEN
We report a novel strategy to assemble wafer-scale two-dimensional (2D) transition metal dichalcogenide (TMD) layers of well-defined components and orientations. We directly grew a variety of 2D TMD layers on "water-dissoluble" single-crystalline salt wafers and precisely delaminated them inside water in a chemically benign manner. This manufacturing strategy enables the automated integration of vertically aligned 2D TMD layers as well as 2D/2D heterolayers of arbitrary stacking orders on exotic substrates insensitive to their kind and shape. Furthermore, the original salt wafers can be recycled for additional growths, confirming high process sustainability and scalability. The generality and versatility of this approach have been demonstrated by developing proof-of-concept "all 2D" devices for diverse yet unconventional applications. This study is believed to shed a light on leveraging opportunities of 2D TMD layers toward achieving large-area mechanically reconfigurable devices of various form factors at the industrially demanded scale.
RESUMEN
A globally imminent shortage of freshwater has been demanding viable strategies for improving desalination efficiencies with the adoption of cost- and energy-efficient membrane materials. The recently explored 2D transition metal dichalcogenides (2D TMDs) of near atomic thickness have been envisioned to offer notable advantages as high-efficiency membranes owing to their structural uniqueness; that is, extremely small thickness and intrinsic atomic porosity. Despite theoretically projected advantages, experimental realization of near atom-thickness 2D TMD-based membranes and their desalination efficiency assessments have remained largely unexplored mainly due to the technical difficulty associated with their seamless large-scale integration. Herein, we report the experimental demonstration of high-efficiency water desalination membranes based on few-layer 2D molybdenum disulfide (MoS2) of only â¼7 nm thickness. Chemical vapor deposition (CVD)-grown centimeter-scale 2D MoS2 layers were integrated onto porous polymeric supports with well-preserved structural integrity enabled by a water-assisted 2D layer transfer method. These 2D MoS2 membranes of near atomic thickness exhibit an excellent combination of high water permeability (>322 L m-2 h-1 bar-1) and high ionic sieving capability (>99%) for various seawater salts including Na+, K+, Ca2+, and Mg2+ with a range of concentrations. Moreover, they present near 100% salt ion rejection rates for actual seawater obtained from the Atlantic coast, significantly outperforming the previously developed 2D MoS2 layer membranes of micrometer thickness as well as conventional reverse osmosis (RO) membranes. Underlying principles behind such remarkably excellent desalination performances are attributed to the intrinsic atomic vacancies inherent to the CVD-grown 2D MoS2 layers as verified by aberration-corrected electron microscopy characterization.
RESUMEN
Two-dimensional transition-metal dichalcogenide (2D TMD) layers are highly attractive for emerging stretchable and foldable electronics owing to their extremely small thickness coupled with extraordinary electrical and optical properties. Although intrinsically large strain limits are projected in them (i.e., several times greater than silicon), integrating 2D TMDs in their pristine forms does not realize superior mechanical tolerance greatly demanded in high-end stretchable and foldable devices of unconventional form factors. In this article, we report a versatile and rational strategy to convert 2D TMDs of limited mechanical tolerance to tailored 3D structures with extremely large mechanical stretchability accompanying well-preserved electrical integrity and modulated transport properties. We employed a concept of strain engineering inspired by an ancient paper-cutting art, known as kirigami patterning, and developed 2D TMD-based kirigami electrical conductors. Specifically, we directly integrated 2D platinum diselenide (2D PtSe2) layers of controlled carrier transport characteristics on mechanically flexible polyimide (PI) substrates by taking advantage of their low synthesis temperature. The metallic 2D PtSe2/PI kirigami patterns of optimized dimensions exhibit an extremely large stretchability of â¼2000% without compromising their intrinsic electrical conductance. They also present strain-tunable and reversible photoresponsiveness when interfaced with semiconducting carbon nanotubes (CNTs), benefiting from the formation of 2D PtSe2/CNT Schottky junctions. Moreover, kirigami field-effect transistors (FETs) employing semiconducting 2D PtSe2 layers exhibit tunable gate responses coupled with mechanical stretching upon electrolyte gating. The exclusive role of the kirigami pattern parameters in the resulting mechanoelectrical responses was also verified by a finite-element modeling (FEM) simulation. These multifunctional 2D materials in unconventional yet tailored 3D forms are believed to offer vast opportunities for emerging electronics and optoelectronics.
RESUMEN
Recent advancements in MoS2 nanofilms have aided in the development for important water-related environmental applications. However, a MoS2 nanofilm-coated sensor has yet to have been applied for heavy metal detection in water-related environmental samples. In this study, a novel vertically aligned two-dimensional (2D) MoS2 (edge exposed) nanofilm was applied for in situ lead ion (Pb2+) detection. The developed sensor showed an excellent linear relationship toward Pb2+ between 0 and 20 ppb at -0.45 V vs Ag/AgCl using square wave anodic stripping voltammetry (SWASV) with the improved limit of detection (LOD) of 0.3 ppb in a tap water environment. The vertically aligned 2D MoS2 sensor exhibited improved detection sensitivity (2.8 folds greater than a previous metallic [Bi] composite electrode) with lower relative standard deviation for repetitive measurements (n = 11), indicating enhanced reproducibility for Pb2+ detection. The vertically aligned 2D MoS2 layers exhibited 2.6 times higher sensitivity than horizontally aligned 2D MoS2 (basal plane exposed). Density functional theory calculations demonstrated that adsorption energy of Pb on the MoS2 side edge was much higher (4.11 eV) than those on the basal plane (0.36 and 0.07 eV). In addition, the band gap center of vertical MoS2 was found to be higher than the Pb2+ â Pb reduction potential level and capable of reducing Pb2+. Overall, the newly developed vertically aligned 2D MoS2 sensor showed excellent performance for detecting Pb2+ in a real drinking water environment with good reliability.
Asunto(s)
Agua Potable/análisis , Técnicas Electroquímicas/instrumentación , Técnicas Electroquímicas/métodos , Plomo/análisis , Nanoestructuras/química , Calibración , Teoría Funcional de la Densidad , Disulfuros/química , Electrodos , Diseño de Equipo , Límite de Detección , Metales Pesados/química , Molibdeno/química , Contaminantes Químicos del Agua/análisisRESUMEN
Many electronic cigarette manufacturers have offered different types of "high-end mods" that allow for controlled heating of the e-liquid. However, the controlled heating condition can drastically alter the inhaled aerosols' physical properties and chemical substances, causing potential health risks. To investigate the contribution of heating on aerosol properties, we used four common power settings in the mods to conduct a physicochemical analysis. Our data showed that the aerosol mass and nicotine content in the aerosols increased at high power. Additionally, high power led to aerosolization of a viscous component in the e-liquid, increasing the viscosity of aerosol. However, the pH of the aerosol was constant regardless of the applied power. In addition, high-power operation made nicotine prone to oxidation, resulting in the color of the aerosol turning yellow. Lastly, we demonstrated that e-cigarette aerosol could contain various metals, including aluminum, arsenic, cadmium, chromium, copper, iron, magnesium, nickel, lead, and zinc. Even though these metal contents proportionally increased with the power setting, they remained far below the recommended exposure limits. Our finding demonstrates that the heating conditions of the e-cigarette change the physicochemical properties of the aerosols and their metal contents, thereby possibly affecting users' oral and respiratory systems.
Asunto(s)
Sistemas Electrónicos de Liberación de Nicotina , Vapeo , Aerosoles/análisis , Calefacción , Nicotina/análisisRESUMEN
Various near-atom-thickness two-dimensional (2D) van der Waals (vdW) crystals with unparalleled electromechanical properties have been explored for transformative devices. Currently, the availability of 2D vdW crystals is rather limited in nature as they are only obtained from certain mother crystals with intrinsically possessed layered crystallinity and anisotropic molecular bonding. Recent efforts to transform conventionally non-vdW three-dimensional (3D) crystals into ultrathin 2D-like structures have seen rapid developments to explore device building blocks of unique form factors. Herein, we explore a "peel-and-stick" approach, where a nonlayered 3D platinum sulfide (PtS) crystal, traditionally known as a cooperate mineral material, is transformed into a freestanding 2D-like membrane for electromechanical applications. The ultrathin (â¼10 nm) 3D PtS films grown on large-area (>cm2) silicon dioxide/silicon (SiO2/Si) wafers are precisely "peeled" inside water retaining desired geometries via a capillary-force-driven surface wettability control. Subsequently, they are "sticked" on strain-engineered patterned substrates presenting prominent semiconducting properties, i.e., p-type transport with an optical band gap of â¼1.24 eV. A variety of mechanically deformable strain-invariant electronic devices have been demonstrated by this peel-and-stick method, including biaxially stretchable photodetectors and respiratory sensing face masks. This study offers new opportunities of 2D-like nonlayered semiconducting crystals for emerging mechanically reconfigurable and stretchable device technologies.
RESUMEN
Periodontal diseases comprise a group of globally prevalent, chronic oral inflammatory conditions caused by microbial dysbiosis and the host immune response. These diseases specifically affect the tooth-supporting tissues (i.e., the periodontium) but are also known to contribute to systemic inflammation. If left untreated, periodontal diseases can ultimately progress to tooth loss, lead to compromised oral function, and negatively impact the overall quality of life. Therefore, it is important for the clinician to accurately diagnose these diseases both early and accurately chairside. Currently, the staging and grading of periodontal diseases are based on recording medical and dental histories, thorough oral examination, and multiple clinical and radiographic analyses of the periodontium. There have been numerous attempts to improve, automate, and digitize the collection of this information with varied success. Recent studies focused on the subgingival microbiome and the host immune response suggest there is an untapped potential for non-invasive oral sampling to assist clinicians in the chairside diagnosis and, potentially, prognosis. Here, we review the available toolkit available for diagnosing periodontal diseases, discuss commercially available options, and highlight the need for collaborative research initiatives and state-of-the-art technology development across disciplines to overcome the challenges of rapid periodontal disease diagnosis.
RESUMEN
Wearable bioelectronics with emphasis on the research and development of advanced person-oriented biomedical devices have attracted immense interest in the past decade. Scientists and clinicians find it essential to utilize skin-worn smart tattoos for on-demand and ambulatory monitoring of an individual's vital signs. Here, we report on the development of ultrathin platinum-based two-dimensional dichalcogenide (Pt-TMDs)-based electronic tattoos as advanced building blocks of future wearable bioelectronics. We made these ultrathin electronic tattoos out of large-scale synthesized platinum diselenide (PtSe2) and platinum ditelluride (PtTe2) layered materials and used them for monitoring human physiological vital signs, such as the electrical activity of the heart and the brain, muscle contractions, eye movements, and temperature. We show that both materials can be used for these applications; yet, PtTe2 was found to be the most suitable choice due to its metallic structure. In terms of sheet resistance, skin contact, and electrochemical impedance, PtTe2 outperforms state-of-the-art gold and graphene electronic tattoos and performs on par with medical-grade Ag/AgCl gel electrodes. The PtTe2 tattoos show 4 times lower impedance and almost 100 times lower sheet resistance compared to monolayer graphene tattoos. One of the possible prompt implications of this work is perhaps in the development of advanced human-machine interfaces. To display the application, we built a multi-tattoo system that can easily distinguish eye movement and identify the direction of an individual's sight.
Asunto(s)
Grafito , Tatuaje , Dispositivos Electrónicos Vestibles , Electrodos , Electrónica , HumanosRESUMEN
Two-dimensional (2D) molybdenum disulfide (MoS2) layers are suitable for visible-to-near infrared photodetection owing to their tunable optical bandgaps. Also, their superior mechanical deformability enabled by an extremely small thickness and van der Waals (vdW) assembly allows them to be structured into unconventional physical forms, unattainable with any other materials. Herein, we demonstrate a new type of 2D MoS2 layer-based rollable photodetector that can be mechanically reconfigured while maintaining excellent geometry-invariant photo-responsiveness. Large-area (>a few cm2) 2D MoS2 layers grown by chemical vapor deposition (CVD) were integrated on transparent and flexible substrates composed of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNs) by a direct solution casting method. These composite materials in three-dimensionally rollable forms exhibited a large set of intriguing photo-responsiveness, well preserving intrinsic opto-electrical characteristics of the integrated 2D MoS2 layers; i.e., light intensity-dependent photocurrents insensitive to illumination angles as well as highly tunable photocurrents varying with the rolling number of 2D MoS2 layers, which were impossible to achieve with conventional photodetectors. This study provides a new design principle for converting 2D materials to three-dimensional (3D) objects of tailored functionalities and structures, significantly broadening their potential and versatility in futuristic devices.
RESUMEN
The pitcher plant has evolved its hierarchically grooved peristome to enhance a water-based slippery system for capturing insects with oil-covered footpads. Based on this, we proposed a hierarchically porous oil scoop (HPOS) with capillary-induced oil peel-off ability for repeatable spilled oil recovery. As the HPOS scoops oil-water mixture, water passes through the hole while the oil is confined within a curved geometry. The filter in HPOS has three levels of porous structures; (1) 3D-printed mesh structure with sub-millimeter scale hole to filter out oil from an oil-water mixture, (2) internal micropore in fibers enhancing capillarity and water transport, (3) O2 plasma-induced high-aspect-ratio nanopillar structures imposing anti-oil-fouling property with capillary-induced oil peeling. As the oil-contaminated HPOS makes contact with water, water meniscus rises and peels off the oil immediately at the air-water interface. The oil-peel-off ability of the HPOS would prevent pores from clogging by oils for reuse. The study demonstrated that the HPOS recovers highly viscous oil (up to 5000 mm2·s-1) with a high recovery rate (>95%), leaving the filtered water with low oil content (<10 ppm), which satisfies the discharge criterion of 15 ppm.
RESUMEN
In recent years, there has been increasing interest in leveraging two-dimensional (2D) van der Waals (vdW) crystals for infrared (IR) photodetection, exploiting their unusual optoelectrical properties. Some 2D vdW materials with small band gap energies such as graphene and black phosphorus have been explored as stand-alone IR responsive layers in photodetectors. However, the devices incorporating these IR-sensitive 2D layers often exhibited poor performances owing to their preparation issues such as limited scalability and air instability. Herein, we explored wafer-scale 2D platinum ditelluride (PtTe2) layers for near-to-mid IR photodetection by directly growing them onto silicon (Si) wafers. 2D PtTe2/Si heterojunctions exhibited wavelength- and intensity-dependent high photocurrents in a spectral range of â¼1-7 µm, significantly outperforming stand-alone 2D PtTe2 layers. The observed superiority is attributed to their excellent Schottky junction characteristics accompanying suppressed carrier recombination as well as optical absorbance competition between 2D PtTe2 layers and Si. The direct and scalable growth of 2D PtTe2 layers was further extended to demonstrate mechanically flexible IR photodetectors.
RESUMEN
Two-dimensional (2D) transition metal dichalcogenide (TMD) layers have gained increasing attention for a variety of emerging electrical, thermal, and optical applications. Recently developed metallic 2D TMD layers have been projected to exhibit unique attributes unattainable in their semiconducting counterparts; e.g., much higher electrical and thermal conductivities coupled with mechanical flexibility. In this work, we explored 2D platinum ditelluride (2D PtTe2) layers - a relatively new class of metallic 2D TMDs - by studying their previously unexplored electro-thermal properties for unconventional window applications. We prepared wafer-scale 2D PtTe2 layer-coated optically transparent and mechanically flexible willow glasses via a thermally-assisted tellurization of Pt films at a low temperature of 400 °C. The 2D PtTe2 layer-coated windows exhibited a thickness-dependent optical transparency and electrical conductivity of >106 S m-1 - higher than most of the previously explored 2D TMDs. Upon the application of electrical bias, these windows displayed a significant increase in temperature driven by Joule heating as confirmed by the infrared (IR) imaging characterization. Such superior electro-thermal conversion efficiencies inherent to 2D PtTe2 layers were utilized to demonstrate various applications, including thermochromic displays and electrically-driven defogging windows accompanying mechanical flexibility. Comparisons of these performances confirm the superiority of the wafer-scale 2D PtTe2 layers over other nanomaterials explored for such applications.
RESUMEN
2D PtTe2 layers, a relatively new class of 2D crystals, have unique band structure and remarkably high electrical conductivity promising for emergent opto-electronics. This intrinsic superiority can be further leveraged toward practical device applications by merging them with mature 3D semiconductors, which has remained largely unexplored. Herein, we explored 2D/3D heterojunction devices by directly growing large-area (>cm2) 2D PtTe2 layers on Si wafers using a low-temperature CVD method and unveiled their superior opto-electrical characteristics. The devices exhibited excellent Schottky transport characteristics essential for high-performance photovoltaics and photodetection, i.e., well-balanced combination of high photodetectivity (>1013 Jones), small photo-responsiveness time (â¼1 µs), high current rectification ratio (>105), and water super-hydrophobicity driven photovoltaic improvement (>300%). These performances were identified to be superior to those of previously explored 2D/3D or 2D layer-based devices with much smaller junction areas, and their underlying principles were confirmed by DFT calculations.
RESUMEN
Smart surfaces in nature have been extensively studied to identify their hierarchical structures in micro-/nanoscale to elucidate their superhydrophobicity with varying water adhesion. However, mimicking hybrid features in multiscale requires complex, multi-step processes. Here, we proposed a one-step process for the fabrication of hierarchical structures composed in micro-/nanoscales for superhydrophobic surfaces with tunable water adhesion. Hierarchical patterns were fabricated using a plasma-based selective etching process assisted by a dual scale etching mask. As the metallic mesh is placed above the substrate, it serves the role of dual scale etching masks on the substrate: microscale masks to form the micro-wall network and nanoscale masks to form high-aspect-ratio nanostructures. The micro-walls and nanostructures can be selectively hybridized by adjusting the gap distance between the mesh and the target surface: single nanostructures on a large area for a larger gap distance and hybrid/hierarchical structures with nanostructures nested on micro-walls for a shorter gap distance. The hierarchically nanostructured surface shows superhydrophobicity with low water adhesion, while the hybrid structured surface becomes become superhydrophobic with high adhesion. These water adhesion tunable surfaces were explored for water transport and evaporation. Additionally, we demonstrated a robust superhydrophobic surface with anti-reflectance over a large area.
RESUMEN
Two-dimensional (2D) molybdenum disulfide (MoS2) with vertically aligned (VA) layers exhibits significantly enriched surface-exposed edge sites with an abundance of dangling bonds owing to its intrinsic crystallographic anisotropy. Such structural variation renders the material with exceptionally high chemical reactivity and chemisorption ability, making it particularly attractive for high-performance electrochemical sensing. This superior property can be further promoted as far as it is integrated on mechanically stretchable substrates well retaining its surface-exposed defective edges, projecting opportunities for a wide range of applications utilizing its structural uniqueness and mechanical flexibility. In this work, we explored VA-2D MoS2 layers configured in laterally stretchable forms for multifunctional nitrogen dioxide (NO2) gas sensors. Large-area (>cm2) VA-2D MoS2 layers grown by a chemical vapor deposition (CVD) method were directly integrated onto a variety of flexible substrates with serpentine patterns judiciously designed to accommodate a large degree of tensile strain. These uniquely structured VA-2D MoS2 layers were demonstrated to be highly sensitive to NO2 gas of controlled concentration preserving their intrinsic structural and chemical integrity, e.g., significant current response ratios of â¼160-380% upon the introduction of NO2 at a level of 5-30 ppm. Remarkably, they exhibited such a high sensitivity even under lateral stretching up to 40% strain, significantly outperforming previously reported 2D MoS2 layer-based NO2 gas sensors of any structural forms. Underlying principles for the experimentally observed superiority were theoretically unveiled by density functional theory (DFT) calculation and finite element method (FEM) analysis. The intrinsic high sensitivity and large stretchability of VA-2D MoS2 layers confirmed in this study are believed to be applicable in sensing diverse gas species, greatly broadening their versatility in stretchable and wearable technologies.
RESUMEN
We explored the feasibility of wafer-scale two-dimensional (2D) molybdenum disulfide (MoS2) layers toward futuristic environmentally friendly electronics that adopt biodegradable substrates. Large-area (> a few cm2) 2D MoS2 layers grown on silicon dioxide/silicon (SiO2/Si) wafers were delaminated and integrated onto a variety of cellulose-based substrates of various components and shapes in a controlled manner; examples of the substrates include planar papers, cylindrical natural rubbers, and 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibers. The integrated 2D layers were confirmed to well preserve their intrinsic structural and chemical integrity even on such exotic substrates. Proof-of-concept devices employing large-area 2D MoS2 layers/cellulose substrates were demonstrated for a variety of applications, including photodetectors, pressure sensors, and field-effect transistors. Furthermore, we demonstrated the complete "dissolution" of the integrated 2D MoS2 layers in a buffer solution composed of baking soda and deionized water, confirming their environmentally friendly transient characteristics. Moreover, the approaches to delaminate and integrate them do not demand any chemicals except for water, and their original substrates can be recycled for subsequent growths, ensuring excellent chemical benignity and process sustainability.
RESUMEN
Platinum diselenide (PtSe2) is an emerging class of two-dimensional (2D) transition-metal dichalcogenide (TMD) crystals recently gaining substantial interest, owing to its extraordinary properties absent in conventional 2D TMD layers. Most interestingly, it exhibits a thickness-dependent semiconducting-to-metallic transition, i.e., thick 2D PtSe2 layers, which are intrinsically metallic, become semiconducting with their thickness reduced below a certain point. Realizing both semiconducting and metallic phases within identical 2D PtSe2 layers in a spatially well-controlled manner offers unprecedented opportunities toward atomically thin tailored electronic junctions, unattainable with conventional materials. In this study, beyond this thickness-dependent intrinsic semiconducting-to-metallic transition of 2D PtSe2 layers, we demonstrate that controlled plasma irradiation can "externally" achieve such tunable carrier transports. We grew wafer-scale very thin (a few nm) 2D PtSe2 layers by a chemical vapor deposition (CVD) method and confirmed their intrinsic semiconducting properties. We then irradiated the material with argon (Ar) plasma, which was intended to make it more semiconducting by thickness reduction. Surprisingly, we discovered a reversed transition of semiconducting to metallic, which is opposite to the prediction concerning their intrinsic thickness-dependent carrier transports. Through extensive structural and chemical characterization, we identified that the plasma irradiation introduces a large concentration of near-atomic defects and selenium (Se) vacancies in initially stoichiometric 2D PtSe2 layers. Furthermore, we performed density functional theory (DFT) calculations and clarified that the band-gap energy of such defective 2D PtSe2 layers gradually decreases with increasing defect concentration and dimensions, accompanying a large number of midgap energy states. This corroborative experimental and theoretical study decisively verifies the fundamental mechanism for this externally controlled semiconducting-to-metallic transition in large-area CVD-grown 2D PtSe2 layers, greatly broadening their versatility for futuristic electronics.
RESUMEN
Platinum ditelluride (PtTe2) is an emerging semimetallic two-dimensional (2D) transition-metal dichalcogenide (TMDC) crystal with intriguing band structures and unusual topological properties. Despite much devoted efforts, scalable and controllable synthesis of large-area 2D PtTe2 with well-defined layer orientation has not been established, leaving its projected structure-property relationship largely unclarified. Herein, we report a scalable low-temperature growth of 2D PtTe2 layers on an area greater than a few square centimeters by reacting Pt thin films of controlled thickness with vaporized tellurium at 400 °C. We systematically investigated their thickness-dependent 2D layer orientation as well as its correlated electrical conductivity and surface property. We unveil that 2D PtTe2 layers undergo three distinct growth mode transitions, i.e., horizontally aligned holey layers, continuous layer-by-layer lateral growth, and horizontal-to-vertical layer transition. This growth transition is a consequence of competing thermodynamic and kinetic factors dictated by accumulating internal strain, analogous to the transition of Frank-van der Merwe (FM) to Stranski-Krastanov (SK) growth in epitaxial thin-film models. The exclusive role of the strain on dictating 2D layer orientation has been quantitatively verified by the transmission electron microscopy (TEM) strain mapping analysis. These centimeter-scale 2D PtTe2 layers exhibit layer orientation tunable metallic transports yielding the highest value of â¼1.7 × 106 S/m at a certain critical thickness, supported by a combined verification of density functional theory (DFT) and electrical measurements. Moreover, they show intrinsically high hydrophobicity manifested by the water contact angle (WCA) value up to â¼117°, which is the highest among all reported 2D TMDCs of comparable dimensions and geometries. Accordingly, this study confirms the high material quality of these emerging large-area 2D PtTe2 layers, projecting vast opportunities employing their tunable layer morphology and semimetallic properties from investigations of novel quantum phenomena to applications in electrocatalysis.
RESUMEN
Two-dimensional (2D) layered materials and their heterostructures have recently been recognized as promising building blocks for futuristic brain-like neuromorphic computing devices. They exhibit unique properties such as near-atomic thickness, dangling-bond-free surfaces, high mechanical robustness, and electrical/optical tunability. Such attributes unattainable with traditional electronic materials are particularly promising for high-performance artificial neurons and synapses, enabling energy-efficient operation, high integration density, and excellent scalability. In this review, diverse 2D materials explored for neuromorphic applications, including graphene, transition metal dichalcogenides, hexagonal boron nitride, and black phosphorous, are comprehensively overviewed. Their promise for neuromorphic applications are fully discussed in terms of material property suitability and device operation principles. Furthermore, up-to-date demonstrations of neuromorphic devices based on 2D materials or their heterostructures are presented. Lastly, the challenges associated with the successful implementation of 2D materials into large-scale devices and their material quality control will be outlined along with the future prospect of these emergent materials.