A LaCl3-based lithium superionic conductor compatible with lithium metal.

Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.

Decoupling cell size homeostasis in diatoms from the geometrical constraints of the silica cell wall.

Unicellular organisms are known to exert tight control over their cell size. In the case of diatoms, abundant eukaryotic microalgae, two opposing notions are widely accepted. On the one hand, the rigid silica cell wall that forms inside the parental cell is thought to enforce geometrical reduction of the cell size. On the other hand, numerous exceptions cast doubt on the generality of this model. Here, we monitored clonal cultures of the diatom Stephanopyxis turris for up to 2 yr, recording the sizes of thousands of cells, in order to follow the distribution of cell sizes in the population. Our results show that S. turris cultures above a certain size threshold undergo a gradual size reduction, in accordance with the postulated geometrical driving force. However, once the cell size reaches a lower threshold, it fluctuates around a constant size using the inherent elasticity of cell wall elements. These results reconcile the disparate observations on cell size regulation in diatoms by showing two distinct behaviors, reduction and homeostasis. The geometrical size reduction is the dominant driving force for large cells, but smaller cells have the flexibility to re-adjust the size of their new cell walls.

MiR-320 inhibits PRRSV replication by targeting PRRSV ORF6 and porcine CEBPB.

Porcine reproductive and respiratory syndrome (PRRS), a highly contagious disease caused by Porcine reproductive and respiratory syndrome virus (PRRSV), results in huge economic losses to the world pig industry. MiRNAs have been reported to be involved in regulation of viral infection. In our study, miR-320 was one of 21 common differentially expressed miRNAs of Meishan, Pietrain, and Landrace pig breeds at 9-h post-infection (hpi). Bioinformatics and experiments found that PRRSV replication was inhibited by miR-320 through directly targeting PRRSV ORF6. In addition, the expression of CCAAT enhancer binding protein beta (CEBPB) was also inhibited by miR-320 by targeting the 3' UTR of CEBPB, which significantly promotes PRRSV replication. Intramuscular injection of pEGFP-N1-miR-320 verified that miR-320 significantly inhibited the replication of PRRSV and alleviated the symptoms caused by PRRSV in piglets. Taken together, miR-320 have significant roles in the infection and may be promising therapeutic target for PRRS.

Ambient Pressure Drying of Freeze-Cast Ceramics from Aqueous Suspension.

Freeze-casting has been wildly exploited to construct porous ceramics but usually requires costly and demanding freeze-drying (high vacuum, size limit, and supercooled chamber), which can be avoided by the ambient pressure drying (APD) technique. However, applying APD to freeze-cast ceramic based on an aqueous suspension is still challenging due to inert surface chemistry. Herein, a modified APD strategy is developed to improve the drying process of freeze-cast ceramics by exploiting the simultaneous ice etching, ionic cross-linking, and solvent exchange under mild conditions (-10-0 °C, ambient pressure). This versatile strategy is applicable to various ceramic species, metal ions, and freezing techniques. The incorporated metal ions not only enhance liquid-phase sintering, producing ceramics with higher density and mechanical properties than freeze-cast counterparts, but also render customizable coloration and antibacterial property. The cost-/time-efficient APD is promising for mass production and even successive production of large-size freeze-cast ceramics that exceed the size of commercial freeze-dryers.

Reduction-Controlled Atomic Migration for Single Atom Alloy Library.

Picturing the atomic migration pathways of catalysts in a reactive atmosphere is of central significance for uncovering the underlying catalytic mechanisms and directing the design of high-performance catalysts. Here, we describe a reduction-controlled atomic migration pathway that converts nanoparticles to single atom alloys (SAAs), which has remained synthetically challenging in prior attempts due to the elusive mechanism. We achieved this by thermally treating the noble-metal nanoparticles M (M = Ru, Rh, Pd, Ag, Ir, Pt, and Au) on metal oxide (CuO) supports with H2/Ar. Atomic-level characterization revealed such conversion as the synergistic consequence of noble metal-promoted H2 dissociation and concomitant CuO reduction. The observed atomic migration pathway offers an understanding of the dynamic mechanisms study of nanomaterials formation and catalyst design.

Stable All-Solid-State Lithium Metal Batteries Enabled by Machine Learning Simulation Designed Halide Electrolytes.

Solid electrolytes (SEs) with superionic conductivity and interfacial stability are highly desirable for stable all-solid-state Li-metal batteries (ASSLMBs). Here, we employ neural network potential to simulate materials composed of Li, Zr/Hf, and Cl using stochastic surface walking method and identify two potential unique layered halide SEs, named Li2ZrCl6 and Li2HfCl6, for stable ASSLMBs. The predicted halide SEs possess high Li+ conductivity and outstanding compatibility with Li metal anodes. We synthesize these SEs and demonstrate their superior stability against Li metal anodes with a record performance of 4000 h of steady lithium plating/stripping. We further fabricate the prototype stable ASSLMBs using these halide SEs without any interfacial modifications, showing small internal cathode/SE resistance (19.48 Ω cm2), high average Coulombic efficiency (∼99.48%), good rate capability (63 mAh g-1 at 1.5 C), and unprecedented cycling stability (87% capacity retention for 70 cycles at 0.5 C).

A Petrochemical-Free Route to Superelastic Hierarchical Cellulose Aerogel.

Cellulose aerogels are plagued by intermolecular hydrogen bond-induced structural plasticity, otherwise rely on chemicals modification to extend service life. Here, we demonstrate a petrochemical-free strategy to fabricate superelastic cellulose aerogels by designing hierarchical structures at multi scales. Oriented channels consolidate the whole architecture. Porous walls of dehydrated cellulose derived from thermal etching not only exhibit decreased rigidity and stickiness, but also guide the microscopic deformation and mitigate localized large strain, preventing structural collapse. The aerogels show exceptional stability, including temperature-invariant elasticity, fatigue resistance (∼5 % plastic deformation after 105  cycles), high angular recovery speed (1475.4° s-1 ), outperforming most cellulose-based aerogels. This benign strategy retains the biosafety of biomass and provides an alternative filter material for health-related applications, such as face masks and air purification.

Matrix-Directed Mineralization for Bulk Structural Materials.

Mineral-based bulk structural materials (MBSMs) are known for their long history and extensive range of usage. The inherent brittleness of minerals poses a major problem to the performance of MBSMs. To overcome this problem, design principles have been extracted from natural biominerals, in which the extraordinary mechanical performance is achieved via the hierarchical organization of minerals and organics. Nevertheless, precise and efficient fabrication of MBSMs with bioinspired hierarchical structures under mild conditions has long been a big challenge. This Perspective provides a panoramic view of an emerging fabrication strategy, matrix-directed mineralization, which imitates the in vivo growth of some biominerals. The advantages of the strategy are revealed by comparatively analyzing the conventional fabrication techniques of artificial hierarchically structured MBSMs and the biomineral growth processes. By introducing recent advances, we demonstrate that this strategy can be used to fabricate artificial MBSMs with hierarchical structures. Particular attention is paid to the mass transport and the precursors that are involved in the mineralization process. We hope this Perspective can provide some inspiring viewpoints on the importance of biomimetic mineralization in material fabrication and thereby spur the biomimetic fabrication of high-performance MBSMs.

Amorphous Calcium Carbonate Cluster Nanospheres in Water-Deficient Organic Solvents.

As the key intermediate phase of crystalline calcium carbonate biominerals, amorphous calcium carbonate (ACC) remains mysterious in its structures because of its long-range disorder and instability. We herein report the synthesis of ACC nanospheres in a water-deficient organic solvent system. The obtained ACC nanospheres are very stable under dry conditions. Cryo-TEM reveals that each nanospheres consists of smaller nanosized clusters. We further demonstrate that these clusters can precipitate on other substrates to form an ultrathin ACC coating, which should be an ACC cluster monolayer. The results demonstrate that the presence of small ACC clusters as the subunits of larger aggregates is inherent to ACC synthesized in water-alcohol system but not induced by polymer additives.

Assembly properties of the bacterial tubulin homolog FtsZ from the cyanobacterium Synechocystis sp. PCC 6803.

The tubulin homolog FtsZ is the major cytoskeletal protein in the bacterial cell division machinery, conserved in almost all bacteria, archaea, and chloroplasts. Bacterial FtsZ assembles spontaneously into single protofilaments, sheets, and bundles in vitro, and it also accumulates at the site of division early during cell division, where it forms a dynamic protein complex, the contractile ring or Z-ring. The biochemical properties of FtsZ proteins from many bacteria have been studied, but comparable insights into FtsZs from cyanobacteria are limited. Here, using EM and light-scattering assays, we studied the biochemical and assembly properties of SyFtsZ, the FtsZ protein from the cyanobacterial strain Synechocystis sp. PCC 6803. SyFtsZ had a slow GTPase activity of ∼0.4 GTP/FtsZ molecule/min and assembled into thick, straight protofilament bundles and curved bundles, designated toroids. The assembly of SyFtsZ in the presence of GTP occurred in two stages. The first stage consisted of the assembly of single-stranded straight protofilaments and opened circles; in the second stage, the protofilaments associated into straight protofilament bundles and toroids. In addition to these assemblies, we also observed highly curved oligomers and minirings after GTP hydrolysis or in the presence of excess GDP. The three types of protofilaments of SyFtsZ observed here provide support for the hypothesis that a constriction force due to curved protofilaments bends the membrane. In summary, our findings indicate that, unlike other bacterial FtsZ, SyFtsZ assembles into thick protofilament bundles. This bundling is similar to that of chloroplast FtsZ, consistent with its origin in cyanobacteria.

Comparative transcriptomic analysis and endocuticular protein gene expression of alate adults, workers and soldiers of the termite Reticulitermes aculabialis.

BACKGROUND: The insect cuticle is mainly composed of exocuticle and endocuticle layers that consist of a large number of structural proteins. The thickness and synthesis of the exocuticle depend on different castes that perform various functions in alates, workers and soldiers. However, it is not clear whether the soft endocuticle is involved in the division of labour in termite colonies. To reveal the structural characteristics of the endocuticle in different castes, we investigated the thickness of endocuticle layers in alates, workers and soldiers of the termite Reticulitermes aculabialis, and then we sequenced their transcriptome and detected the endocuticle protein genes. The differential expression levels of the endocuticular protein genes were confirmed in the three castes. RESULTS: We found that there was a great difference in the thickness of the endocuticle among the alates, soldiers and workers. The thickest endocuticle layers were found in the heads of the workers 7.88 ± 1.67 µm. The endocuticle layer in the head of the workers was approximately three-fold and nine-fold thicker than that in the heads of soldiers and alates, respectively. The thinnest endocuticle layers occurred in the head, thorax and abdomen of alates, which were 0.86 ± 0.15, 0.76 ± 0.24 and 0.52 ± 0.17 µm thick, respectively, and had no significant differences. A total of 43,531,650 clean sequencing reads was obtained, and 89,475 unigenes were assembled. Of the 70 identified cuticular protein genes, 10 endocuticular genes that belong to the RR-1 family were selected. qRT-PCR analysis of the five endocuticular genes (SgAbd-2, SgAbd-9, Abd-5, SgAbd-2-like and Abd-4-like) revealed that the endocuticle genes were more highly expressed in workers than in soldiers and alates. CONCLUSION: These results suggest that SgAbd and Abd are the key components of the endocuticle. We infer that the thicker endocuticle in workers is helpful for them to perform their functions against environmental stress.

Synthesis and anti-tyrosinase mechanism of the substituted vanillyl cinnamate analogues.

This study aimed to synthesize and screen tyrosinase inhibitors for delay fruit browning. A series of vanillyl cinnamate analogues were designed and synthesized by simple processes, and the inhibitory effects of all the synthesized derivatives on mushroom tyrosinase were evaluated. In the enzymatic activity test, compounds 21, 22, and 26 had significant (P < 0.05) effect on mushroom tyrosinase at a preliminary screening dose (1 mg/mL in vitro). IC50 analysis showed that the IC50 values of compounds 21, 22 and 26 were 268.5 µM, 213.2 µM and 413.5 µM, respectively. In the cytotoxicity evaluation, Cell Counting Kit-8 (CCK-8) assay showed that compounds 21, 22 and 26 had no significant effect on the proliferation of hepatocyte L02 and B16 melanoma cells at the dosage of 25-200 µM. Inhibition of tyrosinase activity and melanin content in B16 melanoma cells investigations indicated that compounds 21, 22 and 26 inhibited both cellular tyrosinase activity and melanin content dose-dependently and more strongly than the reference standard arbutin. The UV-visible spectra showed compound 22 inhibits the formation of dopamine quinone, further the molecular docking analysis of compound 22 with tyrosinase (PDB: 2Y9X) indicated that compound 22 interacted with the amino acid residues of tyrosinase. The results of anti-browning test showed that compounds 21, 22 and 26 had significant tyrosinase inhibition and anti-browning effects on fresh-cut apple slices at 4 °C in 48 h. Compound 22 could be used as novel tyrosinase inhibitor to delay fruit browning.

Modified Guo-Min decoction ameliorates PM2.5-induced lung injury by inhibition of PI3K-AKT and MAPK signaling pathways.

BACKGROUND/PURPOSE: Exposure to particles with an aerodynamic diameter of ≤2.5 µm (PM2.5) increased various lung diseases, which lack effective treatment. Massive evidence links PM2.5 to the development of allergic lung diseases like asthma. Modified Guo-Min Decoction (MGMD) is a traditional Chinese formula for allergic diseases. However, whether MGMD could improve PM2.5-induced lung injury and the underlying mechanism remain unclear and we aimed to explore. STUDY DESIGN/METHODS: Male Wistar rats (200-220 g) were intratracheally instilled of PM2.5 suspension daily for 4 weeks to establish PM2.5-induced lung injury model. MGMD (2.1 g/kg) treatment by gavage was started 1 week before, at the same time or 1 week after the instillation of PM2.5 suspension, namely the pre-, sync- or post-administration groups. HE and Masson staining were used to observe morphological changes. Immunohistochemistry staining was used to detect macrophage and neutrophil infiltration. The levels of inflammatory cytokines in the bronchoalveolar lavage fluid were detected by ELISA. The main components of MGMD were detected by UHPLC-LTQ-Orbitrap MSn. Network pharmacology was used to identify the key targets mediating the effect of MGMD in treating PM2.5-induced lung injury. Changes in the expression of target proteins were examined by western blot. In-vitro experiments were carried out in Beas2b cells to evaluate the protective effect and mechanism of MGMD against PM2.5 induced injury. RESULTS: Exposure to PM2.5 suspension resulted in disarrangement of tracheal epithelium, neutrophil and M1 macrophage infiltration and collagen deposition, and significantly increased IgE, IL-1ß and IL-17 secretion and NLRP3 expression, which were inhibited by MDMD treatment and pre-MGMD treatment showed the best effect. By UHPLC-LTQ-Orbitrap MSn, 46 main compounds were identified in MGMD. Using network pharmacology approach, we found MGMD attenuate PM2.5-induced lung damage by targeting 216 genes, and PPI network, GO and KEGG analysis all indicated that PI3K-AKT and MAPK pathways were important. Western blot showed that PM2.5 suspension exposure increased PI3K, AKT, ERK and JNK phosphorylation, which were reversed by MGMD intervention significantly. In vitro, the viability of Beas2b cells was significantly decreased after PM2.5 suspension exposure, and was obviously upregulated after MGMD-containing serum or LY294002 treatment. CONCLUSION: The present study demonstrated that MGMD could improve PM2.5-induced lung injury through reducing inflammation and pulmonary fibrosis, which was probably mediated by inhibition of the PI3K-AKT and MAPK signaling pathways, and NLRP3 inflammasome. The results of this study support and provide scientific evidence for the clinical application of MGMD on PM2.5-induced lung injury. Pre-treatment, sync-treatment, and post-treatment is the highlight of this study.

The Mechanism of Inhomogeneous Mass Transfer Process of Separators in Lithium-Ion Batteries.

The liquid-phase mass transport is the key factor affecting battery stability. The influencing mechanism of liquid-phase mass transport in the separators is still not clear, the internal environment being a complex multi-field during the service life of lithium-ion batteries. The liquid-phase mass transport in the separators is related to the microstructure of the separator and the physicochemical properties of electrolytes. Here, in-situ local electrochemical impedance spectra were developed to investigate local inhomogeneities in the mass transfer process of lithium-ion batteries. The geometric microstructure of the separator significantly impacts the mass transfer process, with a reduction in porosity leading to increased overpotentials. A competitive relationship among porosity, tortuosity, and membrane thickness in the geometric parameters of the separator were established, resulting in a peak of polarization. The resistance of the liquid-phase mass transfer process is positively correlated with the viscosity of the electrolyte, hindering ion migration due to high viscosity. Polarization is closely related to the electrochemical performance, so a phase diagram of battery performance and inhomogeneous mass transfer was developed to guide the design of the battery. This study provides a foundation for the development of high stability lithium-ion batteries.

Nanograded artificial nacre with efficient energy dissipation.

The renowned mechanical performance of biological ceramics can be attributed to their hierarchical structures, wherein structural features at the nanoscale play a crucial role. However, nanoscale features, such as nanogradients, have rarely been incorporated in biomimetic ceramics because of the challenges in simultaneously controlling the material structure at multiple length scales. Here, we report the fabrication of artificial nacre with graphene oxide nanogradients in its aragonite platelets through a matrix-directed mineralization method. The gradients are formed via the spontaneous accumulation of graphene oxide nanosheets on the surface of the platelets during the mineralization process, which then induces a lateral residual stress field in the platelets. Nanoindentation tests and mercury intrusion porosimetry demonstrate that the material's energy dissipation is enhanced both intrinsically and extrinsically through the compressive stress near the platelet surface. The energy dissipation density reaches 0.159 ± 0.007 nJ/µm3, and the toughness amplification is superior to that of the most advanced ceramics. Numerical simulations also agree with the finding that the stress field notably contributes to the overall energy dissipation. This work demonstrates that the energy dissipation of biomimetic ceramics can be further increased by integrating design principles spanning multiple scales. This strategy can be readily extended to the combinations of other structural models for the design and fabrication of structural ceramics with customized and optimized performance.

Deformable hard tissue with high fatigue resistance in the hinge of bivalve Cristaria plicata.

The hinge of bivalve shells can sustain hundreds of thousands of repeating opening-and-closing valve motions throughout their lifetime. We studied the hierarchical design of the mineralized tissue in the hinge of the bivalve Cristaria plicata, which endows the tissue with deformability and fatigue resistance and consequently underlies the repeating motion capability. This folding fan-shaped tissue consists of radially aligned, brittle aragonite nanowires embedded in a resilient matrix and can translate external radial loads to circumferential deformation. The hard-soft complex microstructure can suppress stress concentration within the tissue. Coherent nanotwin boundaries along the longitudinal direction of the nanowires increase their resistance to bending fracture. The unusual biomineral, which exploits the inherent properties of each component through multiscale structural design, provides insights into the evolution of antifatigue structural materials.

Systematic Pharmacology-Based Strategy to Explore the Mechanism of Bufei Huoxue Capsule in the Treatment of Chronic Obstructive Pulmonary Disease.

Objective: To explore the effects and mechanisms of Bufei Huoxue Capsule (BHC) on chronic obstructive pulmonary disease (COPD) based on network pharmacology. Methods: The effective components and related targets of BHC were collected by searching TCMSP, HERB, and ETCM databases, after which the related targets of COPD were obtained on GeneCards and OMIM databases. The common targets were imported into the STRING database and Cytoscape database to construct a target interaction network and screen core targets. Next, Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses were performed on the Metascape platform. According to the prediction results of network pharmacology, the action mechanism was further examined in an animal model of COPD. The pathological changes of lung tissue were observed by HE staining; goblet cells and mucus secretion in lung tissue were observed by AB-PAS staining, airway collagen deposition was observed by Masson staining, and the expression of NE, TGF-ß1, P-EGFR/EGFR, P-ERK1/2/ERK1/2, P-JNK/JNK, and P-P38/P38MAPK protein was detected by Western blot analysis. Results: A total of 379 targets related to BHC and 7391 targets related to COPD were obtained, including 313 potential targets of BHC in treating chronic obstructive pulmonary disease, with JUN, AKT1, TNF, IL6, EGFR, MAPK1, and MAPK14 as the core targets. Through enrichment analysis, BHC may interfere with COPD by regulating the MAPK signal pathway, HIF-1 signal pathway, NF-κB signal pathway, cAMP signal pathway, cGMP-PKG signal pathway, and so on. Animal experiments showed that the BHC could reduce airway inflammatory cell infiltration, inhibit airway epithelial goblet cell proliferation, reduce mucus secretion, and improve small airway collagen fiber deposition in COPD model rats. Besides, BHC could downregulate the protein expression of NE, TGF-ß1, P-EGFR, P-ERK1/2, and P-P38MAPK. Conclusion: BHC can reduce airway inflammation, inhibit mucus hypersecretion, and improve airway remodeling by regulating the MAPK signal transduction pathway.

Amorphous Precursor-Mediated Calcium Phosphate Coatings with Tunable Microstructures for Customized Bone Implants.

Calcium phosphate (CaP) is frequently used as coating for bone implants to promote osseointegration. However, commercial CaP coatings via plasma spraying display similar microstructures, and thus fail to provide specific implants according to different surgical conditions or skeletal bone sites. Herein, inspired by the formation of natural biominerals with various morphologies mediated by amorphous precursors, CaP coatings with tunable microstructures mediated by an amorphous metastable phase are fabricated. The microstructures of the coatings are precisely controlled by both polyaspartic acid and Mg2+ . The cell biological behaviors, including alkaline phosphatase activity, mineralization, and osteogenesis-related genes expression, on the CaP coatings with different microstructures, exhibit significant differences. Furthermore, in vivo experiments demonstrate the osseointegration in different types of rats and bones indeed favors different CaP coatings. This biomimetic strategy can be used to fabricate customized bone implants that can meet the specific requirements of various surgery conditions.

P-Doped NiTe2 with Te-Vacancies in Lithium-Sulfur Batteries Prevents Shuttling and Promotes Polysulfide Conversion.

Lithium-sulfur (Li-S) batteries have been hindered by the shuttle effect and sluggish polysulfide conversion kinetics. Here, a P-doped nickel tellurium electrocatalyst with Te-vacancies (P⊂NiTe2- x ) anchored on maize-straw carbon (MSC) nanosheets, served as a functional layer (MSC/P⊂NiTe2- x ) on the separator of high-performance Li-S batteries. The P⊂NiTe2- x electrocatalyst enhanced the intrinsic conductivity, strengthened the chemical affinity for polysulfides, and accelerated sulfur redox conversion. The MSC nanosheets enabled NiTe2 nanoparticle dispersion and Li+ diffusion. In situ Raman and ex situ X-ray absorption spectra confirmed that the MSC/P⊂NiTe2- x restrained the shuttle effect and accelerated the redox conversion. The MSC/P⊂NiTe2- x -based cell has a cyclability of 637 mAh g-1 at 4 C over 1800 cycles with a degradation rate of 0.0139% per cycle, high rate performance of 726 mAh g-1 at 6 C, and a high areal capacity of 8.47 mAh cm-2 under a sulfur configuration of 10.2 mg cm-2 , and a low electrolyte/sulfur usage ratio of 3.9. This work demonstrates that vacancy-induced doping of heterogeneous atoms enables durable sulfur electrochemistry and can impact future electrocatalytic designs related to various energy-storage applications.

Artificial Nacre with High Toughness Amplification Factor: Residual Stress-Engineering Sparks Enhanced Extrinsic Toughening Mechanisms.

The high fracture toughness of mollusk nacre is predominantly attributed to the structure-associated extrinsic mechanisms such as platelet sliding and crack deflection. While the nacre-mimetic structures are widely adopted in artificial ceramics, the extrinsic mechanisms are often weakened by the relatively low tensile strength of the platelets with a large aspect ratio, which makes the fracture toughness of these materials much lower than expected. Here, it is demonstrated that the fracture toughness of artificial nacre materials with high inorganic contents can be improved by residual stress-induced platelet strengthening, which can catalyze more effective extrinsic toughening mechanisms that are specific to the nacre-mimetic structures. Thereby, while the absolute fracture toughness of the materials is not comparable with advanced ceramic-based composites, the toughness amplification factor of the material reaches 16.1 ± 1.1, outperforming the state-of-the-art biomimetic ceramics. The results reveal that, with the merit of nacre-mimetic structural designs, the overall fracture toughness of the artificial nacre can be improved by the platelet strengthening through extrinsic toughening mechanisms, although the intrinsic fracture toughness may decrease at platelet level due to the strengthening. It is anticipated that advanced structural ceramics with exceeding performance can be fabricated through these unconventional strategies.