From 3D printing to 3D bioprinting: the material properties of polymeric material and its derived bioink for achieving tissue specific architectures.

The application of 3D printing technologies fields for biological tissues, organs, and cells in the context of medical and biotechnology applications requires a significant amount of innovation in a narrow printability range. 3D bioprinting is one such way of addressing critical design challenges in tissue engineering. In a more general sense, 3D printing has become essential in customized implant designing, faithful reproduction of microenvironmental niches, sustainable development of implants, in the capacity to address issues of effective cellular integration, and long-term stability of the cellular constructs in tissue engineering. This review covers various aspects of 3D bioprinting, describes the current state-of-the-art solutions for all aforementioned critical issues, and includes various illustrative representations of technologies supporting the development of phases of 3D bioprinting. It also demonstrates several bio-inks and their properties crucial for being used for 3D printing applications. The review focus on bringing together different examples and current trends in tissue engineering applications, including bone, cartilage, muscles, neuron, skin, esophagus, trachea, tympanic membrane, cornea, blood vessel, immune system, and tumor models utilizing 3D printing technology and to provide an outlook of the future potentials and barriers.

Simulation of scalp cooling by external devices for prevention of chemotherapy-induced alopecia.

Hypothermia of the scalp tissue during chemotherapy treatment (scalp cooling) has been shown to reduce or prevent chemotherapy-induced hair loss. In this study, numerical models are developed to investigate the interaction between different types of external scalp cooling devices and the human scalp tissue. This work focuses on improving methods of modeling scalp cooling devices as it relates specifically to the prevention of chemotherapy-induced alopecia. First, the cooling power needed for any type of device to achieve therapeutic levels of scalp hypothermia is investigated. Subsequently, two types of scalp cooling devices are simulated: a pre-cooled/frozen cap design and a liquid-cooled cap design. For an average patient, simulations show that 38.5W of heat must be extracted from the scalp tissue for this therapy in order to cool the hair follicle to 22°C. In practice, the cooling power must be greater than this amount to account for thermal losses of the device. Simulations show that pre-cooled and liquid-cooled cap designs result in different tissue temperatures over the course of the procedure. However, it is the temperature of the coolant that largely determines the resulting tissue temperature. Simulations confirm that the thermal resistance of the hair/air layer has a large impact on the resulting tissue temperatures. The results should be correlated with experimental data as an effort to determine the optimal parameter choices for this model.

Model development and experimental validation for analyzing initial transients of irradiation of tissues during thermal therapy using short pulse lasers.

BACKGROUND AND OBJECTIVES: Short pulse lasers with pulse durations in the range of nanoseconds and shorter are effective in the targeted delivery of heat energy for precise tissue heating and ablation. This photothermal therapy is useful where the removal of cancerous tissue sections is required. The objective of this paper is to use finite element modeling to demonstrate the differences in the thermal response of skin tissue to short-pulse and continuous wave laser irradiation in the initial stages of the irradiation. Models have been developed to validate the temperature distribution and heat affected zone during laser irradiation of excised rat skin samples and live anesthetized mouse tissue. STUDY DESIGN/MATERIALS AND METHODS: Excised rat skin samples and live anesthetized mice were subjected to Nd:YAG pulsed laser (1,064 nm, 500 ns) irradiation of varying powers. A thermal camera was used to measure the rise in surface temperature as a result of the laser irradiation. Histological analyses of the heat affected zone created in the tissue samples due to the temperature rise were performed. The thermal interaction of the laser with the tissue was quantified by measuring the thermal dose delivered by the laser. Finite element geometries of three-dimensional tissue sections for continuum and vascular models were developed using COMSOL Multiphysics. Blood flow was incorporated into the vascular model to mimic the presence of discrete blood vessels and contrasted with the continuum model without blood perfusion. RESULTS: The temperature rises predicted by the continuum and the vascular models agreed with the temperature rises observed at the surface of the excised rat tissue samples and live anesthetized mice due to laser irradiation respectively. The vascular model developed was able to predict the cooling produced by the blood vessels in the region where the vessels were present. The temperature rise in the continuum model due to pulsed laser irradiation was higher than that due to continuous wave (CW) laser irradiation in the initial stages of the irradiation. The temperature rise due to pulsed and CW laser irradiation converged as the time of irradiation increased. A similar trend was observed when comparing the thermal dose for pulsed and CW laser irradiation in the vascular model. CONCLUSION: Finite element models (continuum and vascular) were developed that can be used to predict temperature rise and quantify the thermal dose resulting from laser irradiation of excised rat skin samples and live anesthetized mouse tissue. The vascular model incorporating blood perfusion effects predicted temperature rise better in the live animal tissue. The models developed demonstrated that pulsed lasers caused greater temperature rise and delivered a greater thermal dose than CW lasers of equal average power, especially during the initial transients of irradiation. This analysis will be beneficial for thermal therapy applications where maximum delivery of thermal dose over a short period of time is important.

Influence of Non-Newtonian Viscosity on Flow Structures and Wall Deformation in Compliant Serpentine Microchannels: A Numerical Study.

The viscosity of fluid plays a major role in the flow dynamics of microchannels. Viscous drag and shear forces are the primary tractions for microfluidic fluid flow. Capillary blood vessels with a few microns diameter are impacted by the rheology of blood flowing through their conduits. Hence, regenerated capillaries should be able to withstand such impacts. Consequently, there is a need to understand the flow physics of culture media through the lumen of the substrate as it is one of the vital promoting factors for vasculogenesis under optimal shear conditions at the endothelial lining of the regenerated vessel. Simultaneously, considering the diffusive role of capillaries for ion exchange with the surrounding tissue, capillaries have been found to reorient themselves in serpentine form for modulating the flow conditions while developing sustainable shear stress. In the current study, S-shaped (S1) and delta-shaped (S2) serpentine models of capillaries were considered to evaluate the shear stress distribution and the oscillatory shear index (OSI) and relative residual time (RRT) of the derivatives throughout the channel (due to the phenomena of near-wall stress fluctuation), along with the influence of culture media rheology on wall stress parameters. The non-Newtonian power-law formulation was implemented for defining rheological viscosity of the culture media. The flow actuation of the media was considered to be sinusoidal and physiological, realizing the pulsatile blood flow behavior in the circulatory network. A distinct difference in shear stress distributions was observed in both the serpentine models. The S1 model showed higher change in shear stress in comparison to the S2 model. Furthermore, the non-Newtonian viscosity formulation was found to produce more sustainable shear stress near the serpentine walls compared to the Newtonian formulation fluid, emphasizing the influence of rheology on stress generation. Further, cell viability improved in the bending regions of serpentine channels compared to the long run section of the same channel.

Cytocentric measurement for regenerative medicine.

Any Regenerative Medicine (RM) business requires reliably predictable cell and tissue products. Regulatory agencies expect control and documentation. However, laboratory tissue production is currently not predictable or well-controlled. Before conditions can be controlled to meet the needs of cells and tissues in culture for RM, we have to know what those needs are and be able to quantify them. Therefore, identification and measurement of critical cell quality attributes at a cellular or pericellular level is essential to generating reproducible cell and tissue products. Here, we identify some of the critical cell and process parameters for cell and tissue products as well as technologies available for sensing them. We also discuss available and needed technologies for monitoring both 2D and 3D cultures to manufacture reliable cell and tissue products for clinical and non-clinical use. As any industry matures, it improves and standardizes the quality of its products. Cytocentric measurement of cell and tissue quality attributes are needed for RM.

Fibroblast Derived Skin Wound Healing Modeling on Chip under the Influence of Micro-Capillary Shear Stress.

Fibroblast cell migration plays a crucial role in the wound-healing process. Hence, its quantitative investigation is important to understand the mechanism of the wound-healing process. The dynamic nature of the wound-healing process can be easily implemented using a microfluidic-based wound-healing assay. This work presented the use of a microfluidics device to simulate traumatic wounds on fibroblast cell monolayers by utilizing trypsin flow and PDMS barrier. In this study, a microfluidic chip with a transparent silk film is reported. The placement of film provides 3D cell culture conditions that mimic a 3D extracellular matrix (ECM) like environment and allows real-time monitoring of cells. A numerical study was conducted to evaluate the influence of dynamic medium-induced shear stress on the base and wall of the microchannel. This could facilitate the optimization of the inlet flow conditions of the media in the channel. At the same time, it could help in identifying stress spots in the channel. The scaffolds were placed in those spots for evaluating the influence of shear forces on the migratory behavior of fibroblast cells. The in vitro microfluidic assembly was then evaluated for cell migration under the influence of external shear forces during the wound-healing phenomena. A faster wound healing was obtained at the end of 24 h of the creation of the wound in the presence of optimal shear stress. On increasing the shear stress beyond a threshold limit, it dissociates fibroblast cells from the surface of the substrate, thereby decelerating the wound-healing process. The above phenomena were transformed in both coplanar microfluidics surfaces (by realizing in the multichannel interlinked model) and transitional microfluidics channels (by realizing in the sandwich model).

Numerical and Experimental Analysis of Shear Stress Influence on Cellular Viability in Serpentine Vascular Channels.

3D bioprinting has emerged as a tool for developing in vitro tissue models for studying disease progression and drug development. The objective of the current study was to evaluate the influence of flow driven shear stress on the viability of cultured cells inside the luminal wall of a serpentine network. Fluid-structure interaction was modeled using COMSOL Multiphysics for representing the elasticity of the serpentine wall. Experimental analysis of the serpentine model was performed on the basis of a desirable inlet flow boundary condition for which the most homogeneously distributed wall shear stress had been obtained from numerical study. A blend of Gelatin-methacryloyl (GelMA) and PEGDA200 PhotoInk was used as a bioink for printing the serpentine network, while facilitating cell growth within the pores of the gelatin substrate. Human umbilical vein endothelial cells were seeded into the channels of the network to simulate the blood vessels. A Live-Dead assay was performed over a period of 14 days to observe the cellular viability in the printed vascular channels. It was observed that cell viability increases when the seeded cells were exposed to the evenly distributed shear stresses at an input flow rate of 4.62 mm/min of the culture media, similar to that predicted in the numerical model with the same inlet boundary condition. It leads to recruitment of a large number of focal adhesion point nodes on cellular membrane, emphasizing the influence of such phenomena on promoting cellular morphologies.

Three-dimensional printing of cell-laden microporous constructs using blended bioinks.

Hydrogels such as alginate and gelatin have shown potential as biomaterials in various three-dimensional (3D) bioprinting applications. However, parameters such as viscosity, porosity, and printability influence the performance of hydrogel-based biomaterials, and there are limited characterization studies conducted on the behavior of these constructs. In this work, a syringe-based extrusion bioprinter was used to print 3D constructs with bioink composed of various concentrations of alginate and gelatin along with fibrinogen and human umbilical vein endothelial cells. Instead of crosslinking the gelatin, the gelatin was left uncrosslinked to provide microporosity within the system that can impact the cellular response. Mechanical and biochemical characterization was performed to evaluate the structural stability and integrity of the printed constructs along with viability of embedded cells. Bioprinted constructs of a higher total concentration of alginate and gelatin yielded better stability and structural integrity after culture. More importantly, higher amounts of gelatin (i.e., 1:9 instead of 2:3 alginate:gelatin) were shown to improve printability, which is different than most studies that instead use alginate to improve printability. In addition, higher amounts of gelatin impacted the changes in surface morphological features of the constructs after incubation, and ultimately improved biocompatibility with our system. Overall, this study demonstrated that an uncrosslinked gelatin system can provide flexible printing parameters and surface morphologies, but careful control over the printing parameters may be required. The bioink concentration of 10% (w/v) with minimum alginate and higher gelatin concentration exhibited the best printability, cell survival, and viability.

miR-146a-5p modulates cellular senescence and apoptosis in visceral adipose tissue of long-lived Ames dwarf mice and in cultured pre-adipocytes.

MicroRNAs (miRNAs) are potent regulators of multiple biological processes. Previous studies have demonstrated that miR-146a-5p increases in normal mice during aging, while long-living Ames dwarf (df/df) mice maintain youthful levels of this miRNA. The aim of this study was to elucidate the involvement of miR-146a-5p in modulating cellular senescence and apoptosis in visceral adipose tissue of df/df mice and cultured pre-adipocytes. To test the effects of miR-146a-5p overexpression on visceral adipose tissue, wild-type, and df/df mice, were treated with miRNA-negative control-base and df/df were transfected with 4 or 8 µg/g of a miR-146a-5p mimetic, respectively. Effects of miR-146a-5p overexpression were also evaluated in 3T3-L1 cells cultured under high and normal glucose conditions. Treatment with miR-146a-5p mimetic increased cellular senescence and inflammation and decreased pro-apoptotic factors in visceral adipose tissue of df/df mice. The miR-146a-5p mimetic induced similar effects in 3T3-L1 cells cultivated at normal but not high glucose levels. Importantly, 3T3-L1 HG cells in high glucose conditions showed significantly higher expression of miR-146a-5p than 3T3-L1 grown in normal glucose conditions. These results indicate that miR-146a-5p can be a marker for cellular senescence. This miRNA represents one of the significant SASP factors that if not precisely regulated, can accentuate inflammatory responses and stimulate senescence in surrounding non-senescent cells. The role of miR-146a-5p is different in healthy versus stressed cells, suggesting potential effects of this miRNA depend on overall organismal health, aging, and metabolic state.

Applying the Cytocentric Principles to Regenerative Medicine for Reproducibility.

Purpose of Review: Cell and tissue products do not just reflect their present conditions; they are the culmination of all they have encountered over time. Currently, routine cell culture practices subject cell and tissue products to highly variable and non-physiologic conditions. This article defines five cytocentric principles that place the conditions for cells at the core of what we do for better reproducibility in Regenerative Medicine. Recent Findings: There is a rising awareness of the cell environment as a neglected, but critical variable. Recent publications have called for controlling culture conditions for better, more reproducible cell products. Summary: Every industry has basic quality principles for reproducibility. Cytocentric principles focus on the fundamental needs of cells: protection from contamination, physiologic simulation, and full-time conditions for cultures that are optimal, individualized, and dynamic. Here, we outline the physiologic needs, the technologies, the education, and the regulatory support for the cytocentric principles in regenerative medicine.

Effect of low intensity laser interaction with human skin fibroblast cells using fiber-optic nano-probes.

Over the past forty years, many efforts have been devoted to study low power laser light interactions with biological systems. Some of the investigations were performed in-vitro, on bulk cell populations. Our present work was undertaken to apply specially engineered fiber-optic based nano-probes for the precise delivery of laser light on to a single cell and to observe production of low power laser light induced reactive oxygen species (ROS). A normal human skin fibroblast (NHF) cell line was utilized in this investigation and the cells were irradiated under two different schemes of exposure: (1) an entire NHF cell population within a Petri dish using a fan beam methodology, and (2) through the precise delivery of laser energy on to a single NHF cell using fiber-optic nano-probe. Photobiostimulative studies were conducted through variation of laser intensity, exposure time, and the energy dose of exposure. Laser irradiation induced enhancement in the rate of cell proliferation was observed to be dependent on laser exposure parameters and the method of laser delivery. The total energy dose (fluence) had a greater influence on the enhancement in the rate of cellular proliferation than compared to laser intensity. The enhancement in the growth rate was observed to have a finite life-time of several days after the initial laser exposure. Fluorescent life-time imaging of ROS was performed during the nano-based single cell exposure method. The kinetics of ROS generation was found to depend strongly on the laser fluence and not on the laser intensity.

NIRS-based cerebrovascular regulation assessment: exercise and cerebrovascular reactivity.

Alterations to cerebral blood flow (CBF) have been implicated in diverse neurological conditions. Near-infrared spectroscopy (NIRS)-measured regional cerebral tissue oxygen saturation ([Formula: see text]) provides an estimate of oxygenation of interrogated cerebral volume useful in identifying variations in oxygen supply to cerebral tissue and in monitoring cerebrovascular function. [Formula: see text]-inhalation-based hypercapnic breathing challenges were used to simulate CBF dysregulation, utilizing NIRS to monitor the CBF autoregulatory response. A breathing circuit was designed to administer [Formula: see text]-compressed air mixtures and assess CBF regulatory responses to hypercapnia in 26 healthy young adults. One to three hypercapnic challenges of 5 or 10 min duration were delivered to each subject while continuously monitoring [Formula: see text], partial pressure of end tidal [Formula: see text] ([Formula: see text]), and vital signs. Change in [Formula: see text] ([Formula: see text]) during [Formula: see text] inhalation positively correlated to [Formula: see text] ([Formula: see text]). Grouping subjects into three exercise factor levels (h/week), (1) 0, (2) [Formula: see text] and [Formula: see text], and (3) [Formula: see text] showed significantly greater [Formula: see text] responses to [Formula: see text] challenges for level 3 subjects but similar [Formula: see text] responses for the three groups. Exercising greater than 10 h/week may produce a higher resting cerebrovascular reactivity (CVR) to [Formula: see text] inhalation. Establishing baseline values of [Formula: see text] and CVR to [Formula: see text] may aid in early detection of CBF changes.

Expression of heat shock proteins 70 and 47 in tissues following short-pulse laser irradiation: assessment of thermal damage and healing.

In order to develop effective laser-based therapeutics, the extent of laser-induced damage must be quantified for given laser parameters. Therefore, we want to determine the spatiotemporal expression patterns of heat shock proteins, both to understand the roles of heat shock proteins in laser-induced tissue damage and repair and to develop heat shock proteins as tools to illustrate the extent of laser-induced damage and wound healing following irradiation. We exposed anesthetized mice to the focused beam of a short-pulse Nd:YAG laser (1064 nm; 200 ns pulsewidth) for 15s, while measuring temperature distribution in the skin using an infrared thermal camera. Following irradiation, we examined expression of HSP47 and HSP70 over time (0-24h) as indicators of the heat shock response and recovery from damage in the laser-irradiated region. Expression patterns of HSP70 and HSP47 as detected by immunohistochemistry and confocal microscopy delineate the extent of damage and the process of healing in tissue. Both HSP70 and HSP47 were expressed in dermis and epidermis following laser irradiation, and the spatial and temporal changes in HSP expression patterns define the laser-induced thermal damage zone and the process of healing in tissues. HSP70 may define biochemically the thermal damage zone in which cells are targeted for destruction, and HSP47 may illustrate the process of recovery from thermally induced damage. Studying the effects of different laser parameters on the expression of HSPs will allow development of effective laser therapies that provide accurate and precise tissue ablation and may promote rapid wound healing following laser-based surgery.

Time-resolved optical tomography using short-pulse laser for tumor detection.

Our objective is to perform a comprehensive experimental and numerical analysis of the short-pulse laser interaction with a tissue medium with the goal of tumor-cancer diagnostics. For a short-pulse laser source, the shape of the output signal is a function of the optical properties of the medium, and hence the scattered temporal optical signal helps in understanding the medium characteristics. Initially experiments are performed on tissue phantoms embedded with inhomogeneities to optimize the time-resolved optical detection scheme. Both the temporal and the spatial profiles of the scattered reflected and transmitted optical signals are compared with the numerical modeling results obtained by solving the transient radiative transport equation using the discrete ordinates technique. Next experiments are performed on in vitro rat tissue samples to characterize the interaction of light with skin layers and to validate the time-varying optical signatures with the numerical model. The numerical modeling results and the experimental measurements are in excellent agreement for the different parameters studied. The final step is to perform in vivo imaging of anesthetized rats with tumor-promoting agents injected inside skin tissues and of an anesthetized mouse with mammary tumors to demonstrate the feasibility of the technique for detecting tumors in an animal model.

Experimental and numerical analysis of short-pulse laser interaction with tissue phantoms containing inhomogeneities.

The objective is to perform an experimental and numerical study to analyze short-pulse laser propagation through tissue phantoms without and with inhomogeneities embedded in them. For a short-pulse laser the observed optical signal has a distinct temporal shape, and the shape is a function of the medium properties. The scattered temporal transmitted and reflected optical signals are measured experimentally with a streak camera for tissue phantoms irradiated with a short-pulse laser source. A parametric study involving different scattering and absorption coefficients of tissue phantoms and inhomogeneities, as well as the detector positions and orientations, is performed. The temporal and spatial profiles of the scattered optical signals are compared with the numerical modeling results obtained by solving the transient radiative transport equation by using the discrete ordinates technique.

Analysis of short-pulse laser photon transport through tissues for optical tomography.

We describe a method for analyzing short-pulse laser propagation through tissues for the detection of tumors and inhomogeneities in tissues with the goal of developing a time-resolved optical tomography system. Traditional methods for analyzing photon transport in tissues usually involve the parabolic or diffusion approximation, which implies infinite speed of propagation of the optical signal. To overcome such limitations we calculate the transmitted and reflected intensity distributions, using the damped-wave hyperbolic P(1) and the discrete-ordinates methods, for a wide range of laser, tissue, and tumor parameters. The results are compared with the parabolic diffusion P(1) approximation.