RESUMEN
Fluorosilicone rubber (F-LSR) is a promising material that can be applied in various cutting-edge industries. However, the slightly lower thermal resistance of F-LSR compared with that of conventional PDMS is difficult to overcome by applying nonreactive conventional fillers that readily agglomerate owing to their incompatible structure. Polyhedral oligomeric silsesquioxane with vinyl groups (POSS-V) is a suitable material that may satisfy this requirement. Herein, F-LSR-POSS was prepared using POSS-V as a chemical crosslinking agent chemically bonded with F-LSR through hydrosilylation. All F-LSR-POSSs were successfully prepared and most of the POSS-Vs were uniformly dispersed in the F-LSR-POSSs, as confirmed by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H-NMR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) measurements. The mechanical strength and crosslinking density of the F-LSR-POSSs were determined using a universal testing machine (UTM) and dynamic mechanical analysis (DMA), respectively. Finally, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) measurements confirmed that the low-temperature thermal properties were maintained, and the heat resistance was significantly improved compared with conventional F-LSR. Eventually, the poor heat resistance of the F-LSR was overcome with three-dimensional high-density crosslinking by introducing POSS-V as a chemical crosslinking agent, thereby expanding the potential fluorosilicone applications.
RESUMEN
Due to the growing demand for versatile hybrid materials that can withstand harsh conditions (below -40 °C), fluorosilicone copolymers are becoming promising materials that can overcome the limited operating temperature of conventional rubber. In order to synthesize a fluorosilicone copolymer, a potent initiator capable of simultaneously initiating various siloxane monomers in anionic ring-opening polymerization (AROP) is required. In this study, tetramethyl ammonium silanolate (TMAS), a quaternary ammonium (QA) anion, was employed as an initiator for AROP, thereby fluoro-methyl-vinyl-silicone (FVMQ) and fluoro-hydrido-methyl-silicone (FHMQ) were successfully synthesized under optimized conditions. FT-IR, NMR, and GPC analyses confirmed that the chain length and functional group content of FVMQ and FHMQ are controlled by changing the ratio of the components. Moreover, fluorine-involved liquid silicone rubber (F-LSR) was prepared with FVMQ as the main chain and FHMQ as a crosslinker. The tensile strength, elongation, and hardness of each F-LSR sample were measured. Finally, it was confirmed through TGA, DSC, TR-test, and embrittlement testing that elastic retention at low temperatures improved even though the heat resistance slightly decreased as the trifluoropropyl group increased in F-LSR. We anticipate that the optimization of fluorosilicone synthesis initiated by QA and the comprehensive characterization of F-LSRs with different fluorine content and chain lengths will be pivotal to academia and industry.
RESUMEN
Pollution emitted from power plants, including a considerable amount of fly ash (FA) and carbon dioxide (CO2), annually increases and is challenging from an environmentally friendly and sustainable point of view. To date, laboratory-scaled approaches cannot efficiently replace the FA-landfilling and mitigate the stress from CO2 emission. Here, a practically operatable fundamental work by combining carbonated FA (C-FA)-immobilizing CO2 in FA-and polypropylene (PP) matrix is reported and reveals abnormal mechanical and thermal features clarified by calculating van der Waals (vdW) interaction from an atomic scale. This is the first study wherein the interaction between instantaneous dipole moment-induced PP and fillers is simulated and examined. The vdW interactions at the (hetero)interfaces are -59.66, -82.30, and -224.39 kJ mol-1 Å-2 for PP, calcium oxide (CaO; before carbonation), and calcium carbonate (CaCO3; after carbonation), respectively, which provides concrete theoretical support for interesting findings such as the independence of tensile strength on filler loadings and "well-grown" interface-induced higher conductivity characteristics of the composites. Therefore, this work can offer practical solutions to mitigate pollution, provide a new perspective on fundamental physical interactions, and guide the development of practical next-generation composite materials.