RESUMEN
Most vegetable crops are severely affected by the uptake of heavy metals from the soil. Heavy metals in vegetable bodies generate reactive oxygen species (ROS) that unbalance the antioxidant defense system. This study was initiated to determine the physiological and biochemical characteristics of spinach plants grown on soil contaminated with heavy metals and responding to Bacillus cereus and Bacillus aerius were isolated from soil contaminated with heavy metals. Heavy metal contamination led to a significant reduction in seed germination, seedling biomass, protein, and total nitrogen content of spinach plants grown in contaminated soils compared to control soils. In contrast, a significant increase in the content of metallothioneins and antioxidant enzymes was observed. Plants inoculated with B. cereus and B. aerius significantly reduced the oxidative stress induced by heavy metals by improving seed germination (%), seedling growth, nitrogen, and protein content. The content of metallothioneins and the activities of antioxidant enzymes were reduced in spinach plants grown from seeds inoculated with bacterial strains. In addition, plants inoculated with, B. cereus and B. aerius showed greater stomata opening than plants grown on soil contaminated with heavy metals, whose stomata were almost closed. These results suggested that both bacterial strains enhanced plant growth by reducing oxidative stress caused by metals.
Asunto(s)
Loratadina/análogos & derivados , Metales Pesados , Contaminantes del Suelo , Spinacia oleracea , Antioxidantes/metabolismo , Metales Pesados/toxicidad , Estrés Oxidativo , Bacterias/metabolismo , Suelo/química , Plantas/metabolismo , Nitrógeno/metabolismo , Contaminantes del Suelo/toxicidad , Contaminantes del Suelo/metabolismoRESUMEN
BACKGROUND INFORMATION: The advancement of biological-mediated nanoscience towards higher levels and novel benchmarks is readily apparent, owing to the use of non-toxic synthesis processes and the incorporation of various additional benefits. This study aimed to synthesize stable tin oxide nanoparticles (SnO2-NPs) using S. rhizophila as a mediator. METHODS: The nanoparticles that were created by biosynthesis was examined using several analytical techniques, including Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), UV-visible (UV-vis) spectroscopy, and energy dispersive X-ray spectroscopy (EDS). RESULTS: The results obtained from the characterization techniques suggest that S. rhizophila effectively catalyzed the reduction of SnCl2 to SnO2-NPs duration of 90 min at ambient temperature with the Æmax of 328 nm. The size of the nano crystallite formations was measured to be 23 nm. The present study investigates nanoscale applications' antibacterial efficacy against four bacterial strains, including Klebsiella Sp, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. The observed zone of inhibition for the nanoparticles (NPs) varied from 10 to 25 mm. The research findings demonstrate that the nanoparticles (NPs) are effective as antibacterial, phytotoxic, and cytotoxic agents.
Asunto(s)
Antibacterianos , Biopelículas , Pruebas de Sensibilidad Microbiana , Compuestos de Estaño , Difracción de Rayos X , Compuestos de Estaño/química , Compuestos de Estaño/farmacología , Biopelículas/efectos de los fármacos , Antibacterianos/farmacología , Antibacterianos/química , Animales , Staphylococcus aureus/efectos de los fármacos , Nanopartículas/química , Bacterias/efectos de los fármacos , Nanopartículas del Metal/química , Nanopartículas del Metal/toxicidad , Escherichia coli/efectos de los fármacos , Pseudomonas aeruginosa/efectos de los fármacos , Microscopía Electrónica de Transmisión , Microscopía Electrónica de Rastreo , Tamaño de la PartículaRESUMEN
Feather waste is a highly prevalent form of keratinous waste that is generated by the poultry industry. The global daily production of feather waste has been shown to approach 5 million tons, typically being disposed of through methods such as dumping, landfilling, or incineration which contribute significantly to environmental pollutions. The proper management of these keratinous wastes is crucial to avoid environmental contamination. The study was carried out to isolate the keratinolytic fungi from the poultry disposal sites of different region of North-East India to evaluate its potential in bioremediation of the feathers wastes. Out of 12 fungal strains isolated from the sites, the fungus showing the highest zone of hydrolysis on both the skim milk and keratin agar medium was selected for the study and the molecular identification of the isolate was performed through DNA sequence analysis by amplifying the internal transcribed spacer (ITS) region. The sequence results showed higher similarity (above 95%) with Aspergillus spp. and was named Aspergillus sp. Iro-1. The strain was further analyzed for its feather degrading potential which was performed in submerged conditions under optimized conditions. The study showed that the strain could effectively degrade the feathers validated through weight loss method, and the structural deformations in the feathers were visualized through scanning electron microscopy (SEM). Aspergillus sp. Iro-1 was obtained from the southern region of Assam. It would be of great importance as the implementation of this sp. can help in the bioremediation of feathers wastes in this region. This is the first study of identification of feather degrading fungus from southern part of Assam (Barak).
Asunto(s)
Péptido Hidrolasas , Aves de Corral , Animales , Aves de Corral/microbiología , Péptido Hidrolasas/metabolismo , Hongos/genética , Hongos/metabolismo , Hidrólisis , Biodegradación Ambiental , Queratinas/metabolismo , Concentración de Iones de Hidrógeno , Pollos , TemperaturaRESUMEN
BACKGROUND: To evaluate visual performance after implantation of the TFNT (Acrysof Panoptix, Alcon, Fort Worth, Texas, USA) and CNWT (Clareon Panoptix, Alcon, Fort Worth, Texas, USA) intraocular lens (IOL), and compare the lens shape observed by scanning electron microscope (SEM). METHODS: Eighteen patients (18 eyes) received implantation of the CNWT and Twenty patients (20 eyes) received implantation of the TFNT. Exclusion criteria were previous ocular surgeries, ocular pathologies, or corneal abnormalities. Intervention or Observational Procedure(s): Postoperative examination at 1 months including manifest refraction; evaluation of refractive error, distance-corrected visual acuity (DCVA) at 5 m, 1 m, 70 cm, 50 cm, 40 cm, and 30 cm, slit-lamp examination; defocus curve testing; contrast sensitivity (CS) was performed. The lens shape of the TFNT and the CNWT was examined under SEM. RESULTS: Mean spherical equivalent was 0.11 ± 0.41 D (CNWT group) and 0.12 ± 0.34 D (TFNT group) 1 month postoperation. DCVA and defocus curve showed no significant difference between the two groups. CS was significantly higher in CNWT group than TFNT group at spatial frequencies of 6 cycles per degree (cpd). Observation of the IOL with a scanning electron microscope (SEM) revealed that CNWT group had improved diffraction structure and edge processing accuracy compared to TFNT group. CONCLUSION: There was no significant difference between the two groups in the defocus curve and visual acuity at all distances. CS was better in the CNWT group than in the TFNT group. IOL surface features may affect CS.
Asunto(s)
Lentes Intraoculares , Facoemulsificación , Humanos , Microscopía Electrónica de Rastreo , Implantación de Lentes Intraoculares , Seudofaquia/cirugía , Visión Binocular , Refracción Ocular , Diseño de PrótesisRESUMEN
OBJECTIVE: Age-related changes in the fiber structure around adipocytes were investigated via scanning electron microscopy (SEM) of excised skin tissues. In addition, the viscoelasticity of the subcutaneous fat layer was evaluated via elastography, and the association between the fiber structure and the viscoelastic properties was assessed. METHODS: Skin tissues excised from the facial cheek area were used. Then, SEM images of these tissues were obtained. The thickness and quantity of the fibers around adipocytes were assessed using a 5-point scale. The score was used to grade 18 tissue samples. Moreover, the viscoelasticity of the subcutaneous fat layer in the same samples was evaluated via ultrasound elastography. RESULTS: Based on the SEM image score, an association was observed between the fiber status score and age, thereby indicating a tendency toward age-related fibrosis. Fiber structures with high scores, which indicate fibrosis, had a significantly lower viscoelasticity based on ultrasound elastography. CONCLUSION: The thickness and quantity of fibrous structures around adipocytes in the subcutaneous fat layer increase with age, and these changes can be associated with decreased viscoelasticity in the subcutaneous fat layer.
Asunto(s)
Adipocitos , Piel , Humanos , Piel/diagnóstico por imagen , Mejilla/diagnóstico por imagen , Grasa Subcutánea/diagnóstico por imagen , FibrosisRESUMEN
Syzgium cumini (L.) Skeels powder (S. cumini powder), also known as Jamun, is well-known for its various medical and health benefits. It is especially recognized for its antidiabetic and antioxidant properties. Thus, S. cumini powder is used in various industries, such as the food and cosmetic industries. In this work, the fruit of S. cumini was utilized; its seeds were extracted, dried, and ground into powder. The ground powders were subjected to various techniques such as physicochemical tests, Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), particle size analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and antioxidant analysis. From the physicochemical tests, it was revealed that the jamun seed filler contained cellulose (43.28%), hemicellulose (19.88%), lignin (23.28%), pectin (12.58%), and wax (0.98%). The FTIR analysis supported these results. For instance, a peak at 2889 cm-1 was observed and associated with CH stretching, typically found in methyl and methylene groups, characteristic of cellulose and hemicellulose structures. The XRD results demonstrated that the crystallinity index of the jamun seed filler was 42.63%. The particle analysis indicated that the mean (average) particle size was 25.34 µm. This observation was ensured with SEM results. The EDX spectrum results showed the elemental composition of the fillers. Regarding thermal degradation, the jamun seed filler had the ability to withstand temperatures of up to 316.5 °C. Furthermore, endothermic and exothermic peaks were observed at 305 °C and 400 °C, respectively. Furthermore, the antioxidant property of the powder displayed a peak scavenging activity of 91.4%. This comprehensive study not only underscores the viability of S. cumini powder as a sustainable and effective particulate filler in polymer composites but also demonstrates its potential to enhance the mechanical properties of composites, thereby offering significant implications for the development of eco-friendly materials in various industrial applications.
RESUMEN
Invasive fungal infections including invasive pulmonary aspergillosis (IPA) generally have a poor prognosis, because the fungi spread throughout various organs. Therefore, it is important to accurately identify the fungal species for treatment. In this article, we present the results of pathological and molecular morphological analyses that were performed to elucidate the cause of respiratory failure in a patient who died despite suspicion of IPA and treatment with micafungin (MCFG). Pathological analysis revealed the existence of cystic and linear fungi in lung tissue. The fungi were identified as Aspergillus fumigatus (A. fumigatus) by partial sequencing of genomic DNA. Correlative light microscopy and electron microscopy (CLEM) analysis confirmed that fungi observed with light microscopy can also be observed with scanning electron microscopy (SEM) using formalin-fixed paraffin-embedded tissue sections. SEM revealed an atypical ultrastructure of the fungi including inhomogeneous widths, rough surfaces, and numerous cyst-like structures of various sizes. The fungi showed several morphological changes of cultured A. fumigatus treated with MCFG that were previously reported. Our results indicate that integrated analysis of ultrastructural observation by SEM and DNA sequencing may be an effective tool for analyzing fungi that are difficult to identify by conventional pathological analysis.
RESUMEN
BACKGROUND: Once bioceramic sealer (BCS) enters the dentinal tubules, it cannot be reliably removed. BCS-occupied dentinal tubules reduce fibre post retention strength. Coating gutta-percha with BCS only on the apical portion may improve post retention strength due to increased retention strength between the dentin and resin cement interface. The aim of the study was to test this hypothesis. METHODS: Root canals of 27 extracted human mandibular premolars were instrumented and randomly assigned to three obturation methods: conventional coating (CC), non-coating (NC), and apical coating (AC). The root canals were obturated with gutta-percha to 4 mm from the working length under an operating microscope. After the BCS was completely set, post spaces were prepared, and quartz fibre posts were cemented. The apical 4.5 mm of the roots were removed. Two samples were prepared at the apical, middle, and coronal root levels (one for scanning electron microscope (SEM) study and another for the push out bond strength (PBS) test). After the PBS test, the samples were examined with a stereo microscope to determine the failure mode: dentine-cement (DC), post-cement (PC) and mixed. The PBS data were analysed by One way ANOVA for the specific obturation method effects. Repeated ANOVA was used for the specific effects of the root levels on PBS in different obturation methods. RESULTS: At all three root levels, more continuous hybrid layers and denser resin tags were found in the NC and AC than the CC group. The AC and NC groups' PBS was significantly higher than the CC group at the apical 1/3 (p = 0.002 and p = 0.001) and coronal 1/3 (p = 0.016 and p = 0.041). The PBS in the CC group at the middle 1/3 was significantly higher than the apical 1/3 (p = 0.022). DC failure mode was most commonly found in the CC group, while PC failure mode was found most frequently in the NC and AC groups. CONCLUSIONS: The apical coating obturation method significantly increased PBS over the conventional coating method, potentially reducing fiber post dislodgement. However, this study was only preliminary. Clinical studies are required to confirm the results.
Asunto(s)
Recubrimiento Dental Adhesivo , Materiales de Obturación del Conducto Radicular , Humanos , Materiales de Obturación del Conducto Radicular/farmacología , Gutapercha , Recubrimiento Dental Adhesivo/métodos , Cementos de Ionómero Vítreo , Cementos de Resina/química , Dentina , Ensayo de Materiales , Cavidad Pulpar , Obturación del Conducto Radicular/métodosRESUMEN
AIM: The purpose of the current study was to evaluate the impact of three various mouthwashes on the effectiveness of fluoride dentifrices in preventing enamel erosion. MATERIALS AND METHODS: A total of 120 sound intact human premolar teeth which were extracted for orthodontic treatment were selected for the study. A 3 × 3 mm window section was positioned in the middle of the coronal surface of the tooth in order to define the study area. Each sample was placed in a solution of 1% citric acid (pH 3.5) for 10 minutes in order to produce an eroded surface. All samples were divided into two main groups (60 samples each) as follows: Group A for sodium fluoride dentifrices and group B for stannous fluoride dentifrices, again it is subdivided into: CHX: Chlohex ADS®, EO: Listerine®, CPC: Colgate® Plax (20 samples in each subgroup). After that, samples underwent the pH cycling model for 5 days. Samples were examined for surface loss using a scanning electron microscope. RESULTS: In sodium fluoride dentifrices group, before intervention, the surface loss was 3.12 ± 1.03 in CHX group, 3.08 ± 1.20 in EO group, and 3.09 ± 0.96 in CPC group. After intervention, the less surface loss found with CHX group (2.18 ± 0.84), followed by CPC (2.34 ± 0.74) and EO group (2.46 ± 0.97). In stannous fluoride dentifrices group, before intervention, the surface loss in CHX group was 3.26 ± 1.19, in EO group, it was 3.18 ± 1.31, and in CPC group, it was 3.22 ± 1.06. After intervention, the less surface loss found with CHX: group (1.90 ± 0.54), followed by CPC (2.24 ± 0.28) and EO group (2.38 ± 0.20). CONCLUSION: The present study concluded that the fluoride dentifrices' preventive effects against tooth surface loss were unaffected by a different mouthwashes with varying compositions and major constituents. In terms of erosion, fluoridated toothpaste containing stannous fluoride was found to provide better surface loss protection than sodium fluoride. CLINICAL SIGNIFICANCE: Primary prevention and the eradication of contributing causes are the greatest strategies for preventing erosion. Simultaneously, antibacterial agent in the mouthwashes may help in enhancing the effect of fluoride in the enamel, owing to their high affinity for teeth structures. Therefore, in addition to cause-related treatment, further efforts to reduce tooth tissue loss are also necessary.
Asunto(s)
Dentífricos , Enfermedades Dentales , Erosión de los Dientes , Humanos , Fluoruros/uso terapéutico , Fluoruro de Sodio/farmacología , Fluoruro de Sodio/uso terapéutico , Antisépticos Bucales/farmacología , Antisépticos Bucales/uso terapéutico , Dentífricos/uso terapéutico , Dentífricos/química , Fluoruros de Estaño/farmacología , Fluoruros de Estaño/uso terapéutico , Erosión de los Dientes/prevención & control , Esmalte DentalRESUMEN
AIM: The present study aimed to evaluate the efficacy of chitosan scaffold combined with calcium silicate cements in the management of internal resorption with perforation. MATERIALS AND METHODS: Internal resorption cavities were simulated in 20 human permanent maxillary incisors that were then divided into two groups: group I - biodentine and group II - chitosan scaffold combined with biodentine. The samples were evaluated for the mineralization activity at the end of the 7th day and 14th day using scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis. The data were recorded, tabulated, and then statistically analyzed. RESULTS: From the SEM-EDX analysis, the mean score of calcium and phosphorus ion uptake by the material was obtained. Statistical analysis by nonparametric Mann-Whitney test showed that there was statistically significant difference in calcium ion uptake at the end of the 7th day (p = 0.016) and at the end of 14th day (p = 0.043) between the group biodentine and group chitosan scaffold combined with biodentine (p < 0.05). CONCLUSION: In this present study, the use of chitosan scaffolds combined with biodentine showed a statistically significant difference in the mineralization activity when compared with pure biodentine. These scaffolded biomaterials exhibited greater potential for mineralization in vitro which can be efficiently used for the management of teeth with internal resorption with perforation. Further clinical trials are required for the understanding of their behavior in real-world scenarios. CLINICAL SIGNIFICANCE: Calcium silicate cements have often exhibited defective hard tissue barrier formation and hence there is a pressing need to search for newer biomaterials that can overcome these shortcomings. Scaffolded biomaterials provide a controlled microcellular environment for bioactivity, and they were found to be efficient in the remineralization of tooth structure. The present study findings indicate that these chitosan scaffolds can be efficiently used in combination with calcium silicate cements for the management of internal resorption with perforation to enhance the treatment outcome.
Asunto(s)
Calcio , Quitosano , Humanos , Calcio/análisis , Quitosano/uso terapéutico , Óxidos/química , Compuestos de Calcio/uso terapéutico , Compuestos de Calcio/química , Silicatos/uso terapéutico , Silicatos/química , Materiales Biocompatibles , Combinación de MedicamentosRESUMEN
Scanning electron microscopy (SEM) is used to observe the surface structure of an object by irradiating an electron beam onto the sample and detecting the reflected and emitted electrons. Because of its large depth of focus, SEM can provide the three-dimensional structure of small surfaces that cannot be observed using an optical microscope. Furthermore, the cross-sectional structure of the tissue can be observed by freeze-cracking. Observing the ultrastructure of organisms that contain large amounts of water in their bodies while maintaining high resolution is challenging; however, this has recently become possible. Here, we explain the fixation and freeze-cracking method for mouse brain samples.
Asunto(s)
Electrones , Técnicas Histológicas , Animales , Ratones , Microscopía Electrónica de Rastreo , Estudios Transversales , EncéfaloRESUMEN
Context: Cytotoxicity and adaptability are among the highly imperative tests that should be performed on a novel endodontic material to ensure its successful implementation in endodontic treatment. Aims: Assess a recently introduced bioceramic root canal sealer CeramoSeal with TotalFill BC and AH plus sealers regarding the cytotoxicity and adaptability. Materials and Methods: Five sealer discs were prepared for each sealer and their extracts were cultured in 96-well plates containing human fibroblasts for 24 h. After their incubation, MTT solution was added to each well plate using an enzyme-linked immunosorbent assay plate reader was implemented to calculate the percentage of viable cells. Thirty mandibular single-rooted premolars were prepared using the Edge Endo rotary system, teeth were divided into three groups (n = 10) based on the sealer type: Group 1 CeramoSeal, Group 2 Totalfill, and Group 3 AH plus sealer. Teeth were sectioned longitudinally and viewed under a scanning electron microscope where the region with the gaps was identified and quantified as a percentage of the root canal's overall area. Statistical Analysis: One-way ANOVA test was used for cytotoxicity, while Kruskal-Wallis and Friedman's tests were used for adaptability. Results: Ceramoseal statistically significantly showed the lowest viability, at high concentrations AH plus showed the highest cell viability, while at lower concentration Totalfill BC sealer showed the highest cell viability percentage. The gap percentages were statistically significantly higher in Ceramoseal group, there was no statistically significant difference between AH Plus and Totalfill groups. Conclusions: Ceramoseal sealer exhibited the lowest viability and highest gap percentage compared to the other sealers.
RESUMEN
The eggshell is the outermost covering of an egg that provides physical and chemical protection. It is a major source of calcium and minerals for the growing embryo during incubation. The egg industry suffers from a considerable economic loss due to poor eggshell quality. Therefore, developing an accurate and precise method of determining eggshell quality is crucial in improving eggshells in subsequent generations of breeding stock. Hence, this study aimed to develop a method to accurately and precisely determine 1) eggshell thickness using a scanning electron microscope (SEM) and 2) eggshell mineral components using an SEM-Energy Dispersive Spectrometry (EDS) system. Four types of table eggs (N = 48; 12 eggs/group): Cage-Free Organic from the US Mainland (CFO-M) and Hawaii (CFO-H), Caged Non-Organic from the US Mainland (CNO-M), and Hawaii (CNO-H) were sourced from the grocery store. Approximately 0.5 mm2 pieces of eggshells from the equator region of the egg were taken and processed for visualization under the SEM. Three distinct layers of eggshell were identified under SEM: the outermost cuticle, the middle palisade, and the innermost mammillary region. The results showed that CFO-H eggs have a greater eggshell thickness (380.43 ± 2.69 µm) and effective thickness (306.28 ± 4.15 µm). Similarly, the mammillary knob count was denser in CNO-H eggs (186 ± 23.02 knobs/0.5 mm2). Calcium (97.36 ± 0.17%) was the highest among minerals in lower palisades (LP). The magnesium concentration was lowest in the LP region, whereas the phosphorus concentration was highest in the upper palisades. Our study established a scientific method to assess the eggshell quality and biochemical characteristics of eggs through SEM and EDS. This method can be used as a marker for selecting superior parent stock to improve eggshell quality in subsequent generations of breeding stock.
Asunto(s)
Calcio , Cáscara de Huevo , Animales , Microscopía Electrónica de Rastreo/veterinaria , Pollos , Óvulo , Calcio de la Dieta , MineralesRESUMEN
For a plastic syringe, a stopper at the end of plunger is usually made of polydimethylsiloxane (PDMS, and co-ingredients). To reduce friction and prevent leakage between the stopper and barrel, short chain polymer of liquid PDMS is also used as lubricant. Consequently, an injection process can release solid PDMS debris from the stopper and barrel, and liquid PDMS droplets from the lubricant, both of which are confirmed herein as solid and liquid micro(nano)plastics. From molecular spectrum perspective to directly visualise those micro(nano)plastics, Raman imaging was employed to analyse hundreds-to-thousands of spectra (hyper spectrum or hyperspectral matrix) and significantly enhance signal-to-noise ratio. From morphology perspective to provide high resolution of image, scanning electron microscopy (SEM) was engaged to cross-check with Raman images and increase assignment / quantification certainty. The weak Raman imaging signal of nanoplastics was extracted using image deconvolution algorithm to remove the background noise and average the signal variation. To increase the result's representativeness and avoid quantification bias, multiple syringes were tested and multiple areas were randomly scanned toward statistical results. It was estimated that thousands of microplastics and millions of nanoplastics of solid/liquid PDMS might be injected when using a plastic syringe of 1 mL. Overall, Raman imaging (along with algorithm and SEM) can be helpful for further research on micro(nano)plastics, and it should be cautious to use plastic syringe due to the increasing concern on the emerging contamination of not only solid but also liquid micro(nano)plastics.
RESUMEN
Aim: The current study's aim was to evaluate the potential of various fluoride varnishes to remineralize artificial enamel lesions on primary teeth. Materials and Methods: For the study, 90 deciduous molar teeth that were implicated for extraction were taken. A window region with a size of 3 × 3 mm was located in the middle of the tooth's coronal surface. The remaining portion was given a coat of nail polish and given time to dry. A demineralizing solution was used to create the artificial enamel lesion. The samples were randomized into three experimental groups at random, with 30 samples in each group. Group 1: Application of Clinpro White Varnish, Group 2: Application of Duraphat Varnish, and Group 3: Application of MI Varnish. After 14 days, samples from each group were examined under scanning electron microscopy at a magnification of 1000× to determine whether remineralization had occurred. Microhardness was also determined using a microhardness tester. Result: Before the intervention, the mean demineralized enamel lesion in the Clinpro White Varnish group was 134.44 ± 0.04, in the Duraphat Varnish group was 133.76 ± 0.12, and in the MI Varnish group was 133.89 ± 0.08. After intervention, the maximum remineralized area was found in the MI Varnish group (82.74 ± 0.18) followed by the Clinpro White Varnish group (101.43 ± 0.16) and the Duraphat Varnish group (104.11 ± 0.10). After the intervention, there was a statistically significant difference found between the groups. After the intervention, the maximum microhardness mean value improved in the MI Varnish group (257.03 ± 1.09 to 261.18 ± 1.20) followed by Clinpro White Varnish (258.78 ± 1.64 to 260.10 ± 1.22) and Duraphat Varnish group (255.24 ± 1.51 to 258.02 ± 0.89). Conclusion: According to the findings of the current investigation, all of the varnishes utilized in this in vitro experiment are capable of correcting early enamel defects on primary teeth. However, MI Varnish group was very effective compared to the Clinpro White Varnish group and the Duraphat Varnish group.
RESUMEN
A trichobothrium is a complex sensory organ, which usually consists of a long, slender mechanoreceptive seta (trich), which is situated in a cuplike depression in the cuticle (bothrium). Nabidae (Hemiptera: Heteroptera: Cimicomorpha), also called damsel bugs, are a relatively small family within which two subfamilies, Nabinae and Prostemmatinae, are distinguished. Trichobothria are present in the number of one to seven pairs located laterally on the scutellum of adult representatives of Prostemmatinae. This feature is commonly used to distinguish this subfamily from Nabinae. Trichobothria are also found on the abdominal tergites of Prostemmatinae nymphs. Similar sensilla have been observed in adult representatives of Nabinae, but their homology has not yet been confirmed. During morphological studies on Nabidae, conducted using scanning electron microscopy, we noticed sensilla resembling trichobothria on the heads of these insects. This discovery prompted us to examine the presence of these structures in damsel bugs more carefully. Imagines of fifteen species of both subfamilies were analysed using a scanning electron microscope. The results present data on the distribution and micromorphology of the trichobothria in damsel bugs. A pair of dorsal and ventral cephalic trichobothria were observed in all of the examined species of subfamily Nabinae. These sensilla were not found on the heads of Prostemmatinae. The results of studies on scutellar trichobothria confirmed the previously known data regarding their occurrence in Prostemmatinae. Moreover, our research showed the presence of these sensory structures in all of the examined Nabinae species: one pair of trichobothria in Arachnocorini, Carthasini, Gorpini and Nabini, and two pairs in Stenonabini. The presence of abdominal trichobothria was shown in Nabini and Stenonabini. In the remaining studied tribes of Nabinae and in the subfamily Prostemmatinae, the presence of structures that could undoubtedly be considered abdominal trichobothria was not found.
Asunto(s)
Heterópteros , Microscopía Electrónica de Rastreo , Sensilos , Animales , Heterópteros/anatomía & histología , Heterópteros/ultraestructura , Sensilos/ultraestructura , Femenino , Masculino , Ninfa/ultraestructura , Ninfa/anatomía & histologíaRESUMEN
The aim of this study was to assess the surface and tissue quality of keratinized mucosa grafts (KMG) obtained using the conventional scalpel and mucotome techniques. This was an experimental in vitro/ex vivo study involving six porcine hemi-mandibles. Specimens were harvested using both the mucotome and conventional scalpel techniques, with randomization determining the choice of technique for tissue removal. The specimens were prepared following predefined laboratory protocols and subsequently subjected to optical microscopy for evaluating epithelial and connective tissue and scanning electron microscopy for topographical and 3D profilometry analysis. Tissues harvested using the mucotome exhibited a linear base and uniform thickness, along with the presence of submucosa and fibrous connective tissue, all of which are ideal for graft success. Differences in the surface characteristics of specimens obtained through the two techniques were observed during a comparative analysis of images obtained through both microscopy types. KMG obtained using the mucotome technique displayed greater uniformity and reduced undesirable cell presence compared to the scalpel technique, thereby enhancing the likelihood of success in soft tissue graft surgical procedures. This study provides valuable insights to oral healthcare professionals and may contribute to future research aimed at achieving more successful surgeries, shorter postoperative recovery times, reduced discomfort, and an overall more positive patient experience.
Asunto(s)
Mandíbula , Mucosa Bucal , Animales , Porcinos , Mucosa Bucal/trasplante , Mucosa Bucal/citología , Mandíbula/cirugía , Queratinas/metabolismo , Microscopía Electrónica de Rastreo , Recolección de Tejidos y Órganos/métodosRESUMEN
This study investigates the distribution, morphology, and potential functions of antennal sensilla in various wasp species, including Dolichovespula flora, D. intermedia, Vespula structor, Vl. vulgaris, Provespa barthelemyi, Vespa bicolor, V. ducalis, V. mocsaryana, and V. velutina var. nigothorax. The study thoroughly analyzes the antennal structure of these species, representing all four genera of the yellow-jacket and hornet subfamily Vespinae. Using scanning electron microscopy (SEM), the study identifies a total of nineteen types of sensilla, including sensilla trichodea (ST-I, ST-II, ST-III), sensilla campaniform (SCF-I, SCF-II, SCF-III), pit organs (SCO-I, SCO-II, and SA), sensilla placodea (SP-I, SP-II), sensilla chaetica (SCH-I, SCH-II), sensilla basiconica (SB-I, SB-II), sensilla agmon (SAG-I, SAG-II), and sensilla coelocapitular (SCA). Additionally, tyloids were observed in the males of seven species, except for Vl. structor and Vl. vulgaris. The study provides insights into these sensilla types' morphology, abundance, and distribution. It discusses the variations in sensilla morphology among different species and the presence of gender-specific sensilla. This study provides new data about the morphology and distribution patterns of sensilla and tyloid.
RESUMEN
Forcipomyia (Lasiohelea) (Meigen, Diptera: Ceratopogonidae) penguin sp. nov. is described and illustrated based on male specimens from China. It is characterized by the approximately rectangular aedeagus, which is longitudinally split in the middle, with the apices slightly bending to the outside, making it into the shape of a hook; bilobed aedeagus is very closely connected. The description is provided using scanning electron microscopes, light microscopes, and camera lucida drawing. The specimens were collected from woods near a pond in Liping County, Guizhou Province. We provide both keys to male and female of Forcipomyia (Lasiohelea) taiwana species group in China.
Asunto(s)
Ceratopogonidae , Masculino , Femenino , Animales , ChinaRESUMEN
Cotesia gregalis Yang et Wei (Hymenoptera: Braconidae) is a gregarious koinobiont endoparasitic wasp attacking the larvae of fall webworm, Hyphantria cunea, an important invasive insect pest in China. To better understand the parasitic wasps' mating and parasitic behaviors, we examined the morphology of the antennae of adult C. gregalis, as well as the type, number, and distribution of antennal sensilla, via scanning electron microscopy. The antennae of female and male C. gregalis are filiform and comprise a scape, pedicel, and 16 flagellomeres. The female antennae are significantly shorter than those of male. A total of nine morphological types of antennal sensilla (mechanoreceptor and chemoreceptor) are presented in both sexes, including four mechanoreceptors (sensilla chaetica [two subtypes], sensilla trichodea and Böhm bristles); five chemoreceptors (sensilla basiconica [two subtypes], sensilla placodea, sensilla styloconica, and sensilla coelocapitula). There is no difference in the type and distribution of antennal sensilla between males and females, but the number and length of some antennal sensilla show sexual dimorphism. The functional morphology of the sensilla of C. gregalis is discussed by comparison with other parasitic wasps. These findings provide foundation for further research on the chemical communication and host localization mechanisms of C. gregalis. RESEARCH HIGHLIGHTS: The first report of morphology and distribution pattern of the antennal sensilla in C. gregalis is discussed. A total of seven main types and nine antennal sensilla subtypes are observed in male and female C. gregalis. The type and distribution of antennal sensilla in males and females are identical; however, the number and length of certain antennal sensilla show sexual dimorphism.