Modified technique for sutured scleral fixated intraocular lens in a patient with post-traumatic aniridia and aphakia: a case report.

BACKGROUND: A modified surgical technique of sutured scleral fixated intraocular lens (SSF-IOL) was applied in a patient with post-traumatic aniridia and aphakia. CASE PRESENTATION: A 51-year-old man was referred to our clinic with decreased vision (finger count) in his right eye. This patient had previously undergone primary repair of the ruptured globe and pars plana vitrectomy to manage ocular trauma in the same eye. On presentation, the best corrected visual acuity in his right eye was 20/40. The slit lamp examination of his right eye revealed loss of total iris and lens. Corneal endothelial cell density was 1462 cells/mm2. Fundoscopic examination of the right eye revealed a retinal attachment. For IOL implantation, a rigid poly methyl methacrylate IOL was used with a 2-point scleral fixation performed using a polypropylene suture. One year postoperatively, the uncorrected distance visual acuity was 20/32, and the manifest refraction was - 0.5/-1.5 × 130 (20/20). Pentacam revealed that the astigmatism of the anterior corneal surface and the total cornea was 1.1 D (axis: 59.8°) and 1.0 D (axis: 35.6°), respectively. The horizontal (3°-183°) cross-section image displayed an IOL with a 1° tilt and 0.425 mm decentration. The patient reported no dysphotopsia or photophobia and was satisfied with the visual results. OPD-scan III revealed that higher-order aberrations in the right eye were slightly higher than those in the left eye. No suture-related or other serious complications were observed. CONCLUSION: The modified SSF-IOL technique can offer improved visual quality for patients with aniridia and aphakia by ensuring proper IOL positioning and reducing astigmatism.

Unveiling a Microexon Switch: Novel Regulation of the Activities of Sugar Assimilation and Plant-Cell-Wall-Degrading Xylanases and Cellulases by Xlr2 in Trichoderma virens.

Functional microexons have not previously been described in filamentous fungi. Here, we describe a novel mechanism of transcriptional regulation in Trichoderma requiring the inclusion of a microexon from the Xlr2 gene. In low-glucose environments, a long mRNA including the microexon encodes a protein with a GAL4-like DNA-binding domain (Xlr2-α), whereas in high-glucose environments, a short mRNA that is produced encodes a protein lacking this DNA-binding domain (Xlr2-ß). Interestingly, the protein isoforms differ in their impact on cellulase and xylanase activity. Deleting the Xlr2 gene reduced both xylanase and cellulase activity and growth on different carbon sources, such as carboxymethylcellulose, xylan, glucose, and arabinose. The overexpression of either Xlr2-α or Xlr2-ß in T. virens showed that the short isoform (Xlr2-ß) caused higher xylanase activity than the wild types or the long isoform (Xlr2-α). Conversely, cellulase activity did not increase when overexpressing Xlr2-ß but was increased with the overexpression of Xlr2-α. This is the first report of a novel transcriptional regulation mechanism of plant-cell-wall-degrading enzyme activity in T. virens. This involves the differential expression of a microexon from a gene encoding a transcriptional regulator.

Vacuum-Boosting Precise Synthetic Control of Highly Bright Solid-State Carbon Quantum Dots Enables Efficient Light Emitting Diodes.

Carbon quantum dots (C-dots) have emerged as efficient fluorescent materials for solid-state lighting devices. However, it is still a challenge to obtain highly bright solid-state C-dots because of the aggregation caused quenching. Compared to the encapsulation of as-prepared C-dots in matrices, one-step preparation of C-dots/matrix complex is a good method to obtain highly bright solid-state C-dots, which is still quite limited. Here, an efficient and controllable vacuum-boosting gradient heating approach is demonstrated for in situ synthesis of a stable and efficient C-dots/matrix complex. The addition of boric acid strongly bonded with urea, promoting the selectivity of the reaction between citric acid and urea. Benefiting from the high reaction selectivity and spatial-confinement growth of C-dots in porous matrices, in situ synthesize C-dots bonded can synthesized dominantly with a crosslinked octa-cyclic compound, biuret and cyanuric acid (triuret). The obtained C-dots/matrix complex exhibited bright green emission with a quantum yield as high as 90% and excellent thermal and photo stability. As a proof-of-concept, the as-prepared C-dots are used for the fabrication of white light-emitting diodes (LEDs) with a color rendering index of 84 and luminous efficiency of 88.14 lm W-1, showing great potential for applications in LEDs.

Optimization of pullulan production by Aureobasidium pullulans using semi-solid-state fermentation and artificial neural networks: Characterization and antibacterial activity of pullulan impregnated with Ag-TiO2 nanocomposite.

This study presents a novel and efficient approach for pullulan production using artificial neural networks (ANNs) to optimize semi-solid-state fermentation (S-SSF) on faba bean biomass (FBB). This method achieved a record-breaking pullulan yield of 36.81 mg/g within 10.82 days, significantly exceeding previous results. Furthermore, the study goes beyond yield optimization by characterizing the purified pullulan, revealing its unique properties including thermal stability, amorphous structure, and antioxidant activity. Energy-dispersive X-ray spectroscopy and scanning electron microscopy confirmed its chemical composition and distinct morphology. This research introduces a groundbreaking combination of ANNs and comprehensive characterization, paving the way for sustainable and cost-effective pullulan production on FBB under S-SSF conditions. Additionally, the study demonstrates the successful integration of pullulan with Ag@TiO2 nanoparticles during synthesis using Fusarium oxysporum. This novel approach significantly enhances the stability and efficacy of the nanoparticles by modifying their surface properties, leading to remarkably improved antibacterial activity against various human pathogens. These findings showcase the low-cost production medium, and extensive potential of pullulan not only for its intrinsic properties but also for its ability to significantly improve the performance of nanomaterials. This breakthrough opens doors to diverse applications in various fields.

SISTER OF FCA physically associates with SKB1 to regulate flowering time in Arabidopsis thaliana.

BACKGROUND: Proper flowering time is important for the growth and development of plants, and both too early and too late flowering impose strong negative influences on plant adaptation and seed yield. Thus, it is vitally important to study the mechanism underlying flowering time control in plants. In a previous study by the authors, genome-wide association analysis was used to screen the candidate gene SISTER OF FCA (SSF) that regulates FLOWERING LOCUS C (FLC), a central gene encoding a flowering suppressor in Arabidopsis thaliana. RESULTS: SSF physically interacts with Protein arginine methyltransferase 5 (PRMT5, SKB1). Subcellular co-localization analysis showed that SSF and SKB1 interact in the nucleus. Genetically, SSF and SKB1 exist in the same regulatory pathway that controls FLC expression. Furthermore, RNA-sequencing analysis showed that both SSF and SKB1 regulate certain common pathways. CONCLUSIONS: This study shows that PRMT5 interacts with SSF, thus controlling FLC expression and facilitating flowering time control.

Extracellular enzymes producing yeasts study: cost-effective production of α-amylase by a newly isolated thermophilic yeast Geotrichum candidum PO27.

Enzymes are biocatalysts mainly used for their industrial potential in various applications. The present study aims to understand the enzyme production for biotechnological interest from a local yeast strain. From 100 isolates obtained from various biotopes, 78 strains were selected for their enzymatic heritage. Screening of α-amylase, lipase/esterase, and cellulase activities by rapid plate detection methods was carried out and the PO27 yeast was selected for its high capacity to produce α-amylase. In addition, this yeast strain exhibited good lipolytic and esterolytic activities, as well as low cellulase activity. A sequence analysis of the D1/D2 region of the 26S ribosomal RNA (26S rRNA) and a study of morphological characteristics identified the PO27 strain as Geotrichum candidum. The production of α-amylase has been studied in solid medium fermentation using various natural substrates without any supplementation such as olive pomace, potato peels, leftover bread, and mastic cake. G. candidum PO27 showed an improved production of α-amylase with olive pomace, thus reaching approximately 180.71 U/g. To evaluate the ability of this isolate to produce α-amylase in submerged fermentation, multiple concentrations of olive pomace substrate were tested. The best activity of submerged fermentation was statistically compared to the solid-state fermentation result in order to select the appropriate fermentation type. A high significant difference was found to rank the 6% olive pomace medium as the best substrate concentration with 34.395 U/mL of α-amylase activity. This work showed that the new isolate Geotrichum candidum PO27 has a better potential to produce α-amylase at a low cost in solid-state fermentation compared to submerged fermentation. Optimization conditions for PO27 α-amylase production through solid-state fermentation were achieved using a one factor at a time (OFAT) approach. The findings revealed that a high temperature (60 °C), an acidic pH, malt extract, and soluble starch were the highly significant medium components for enhancing α- amylase production. The use of olive pomace waste by Geotrichum candidum PO27 is expected to be effective in producing an industrially useful α-amylase.

FIL SSF intraocular lens opacification after gas tamponade: A case series.

PURPOSE: To report three cases of postoperative opacification of sutureless scleral-fixed hydrophilic intraocular lens (FIL SSF IOL, Soleko, Italy) after gas tamponade. Two cases occurred after pars plana vitrectomy and one case after Descemet membrane endothelial keratoplasty. CASE REPORT: Two diabetic patients underwent a FIL SSF IOL implantation after posterior capsular rupture during cataract surgery. Rhegmatogenous retinal detachment (RRD) was observed in one patient during the initial surgery. A second patient developed a RRD five months after surgery. Both RRDs were treated with pars plana vitrectomy and perfluoroethane (C2F6) gas tamponade. A few days after the surgery, C2F6 was observed in the anterior chamber of both patients. Two months after gas tamponade, opacification of the anterior surface of the IOL was observed. The third patient was a 74-year-old woman, who underwent a combined Descemet membrane endothelial keratoplasty (DMEK) and FIL SSF IOL implantation. Two rebubblings with sulfur hexafluoride (SF6) retreatments were required due to corneal graft detachment. One month later, an opacification of the anterior surface of the IOL was observed. Explantation with implantation of iris-claw IOL was decided, which resulted in an improvement of BVCA. Analysis of the IOL showed a positive Von Kossa staining, indicating calcification of the IOL. We performed a review of all the cases of FIL SSF IOL implantation in our centers. The overall rate of FIL SSF IOL opacification was 2.1% (3/140). Amongst patients treated with gas tamponade, the rate of opacification was 27.3% (3/11). Although FIL SSF IOL implantation appears to be an effective option for the treatment of aphakia, caution should be exercised regarding the risk of opacification following gas tamponade, especially since these patients are at risk of retinal detachment.

The Effect of including a Mixed-Enzyme Product in Broiler Diets on Performance, Metabolizable Energy, Phosphorus and Calcium Retention.

The importance of enzymes in the poultry industry is ever increasing because they help to extract as many nutrients as possible from the raw material available and reduce environmental impacts. Therefore, an experiment was conducted to examine the effect of a natural enzyme complex (ASC) on diets low in AME, Ca and P. Male Ross 308 broilers (n = 900) were fed one of four diets: (1) positive control (PC) with no enzyme added (AME 12.55 MJ/kg, AVPhos 4.8 g/kg and AVCal 9.6 g/kg); (2) negative control (NC) with no enzyme added and reduced AME, Ca and P (AME 12.18 MJ/kg, AVPhos 3.3 g/kg, AVCal 8.1 g/kg); (3) negative control plus ASC at 200 g/t; and (4) negative control plus ASC at 400 g/t. Broiler performance, digesta viscosity, tibia mineralization and mineral content were analyzed at d 21. Between d 18 and 20, excreted DM, GE, total nitrogen, Ca, and P were analyzed. ASC at 200 g/t and 400 g/t improved the FCR (p = 0.0014) significantly when compared with that of the NC. There were no significant differences in BW or FI between the treatments. Birds fed ASC at 200 g/t and 400 g/t had significantly improved digesta viscosity (p < 0.0001) compared with that of the PC and NC birds and had significantly higher excreted DM digestibility (p < 0.01) than the NC and the PC birds with 400 g/t ASC. ASC inclusion significantly improved P retention (p < 0.0001) compared to that in the PC. Ca retention was significantly increased by 400 g/t ASC compared to that in the PC and NC (p < 0.001). AME was significantly higher (p < 0.0001) for all treatments compared to that in the NC. There were no significant differences between treatments for any of the bone measurements. This study showed that feeding with ASC can support the performance of broilers when fed a diet formulated to have reduced Ca, P and AME, with the greatest results being seen with a higher level of ASC inclusion.

Thermoalkalophilic polygalacturonase from a novel Glutamicibacter sp.: Bioprospecting, strain improvement, statistical optimization and applications.

The current research discusses a multidimensional bioprocess development, that includes bioprospecting, strain improvement, media optimisation, and applications of the extracted enzyme. A potent alkalophilic polygalacturonase (PG) producing bacterial strain was isolated and identified as a novel Glutamicibacter sp. Furthermore, strain improvement by UV and chemical mutagenesis not only improved the enzyme (PGmut) production but also enhanced its temperature optima from 37 °C to 50 °C. The use of solid substrate fermentation, followed bystatistical optimisation through PB and RSM, substantially increasedPGmut production. A 10-fold increase in enzyme production (632 U/gm) was observed when sugarcane bagasse with a pH of 10.5, 66.8 % moisture, and an inoculum size of 10.15 % was used. The model's accuracy was supported by p-value (p < 0.0001), and an R2 of 0.9940. A pilot-scale experiment, demonstrated ≈ 62,229 U/100 gm PG activity. Additionally, the enzyme's efficacy in demucilization of coffee beans, and bioscouring of jute fibre indicated that it is a valuable biocatalyst.

Solid-State Fermentation Improves Tobacco Leaves Quality via the Screened Bacillus subtilis of Simultaneously Degrading Starch and Protein Ability.

The process of tobacco aging plays a significant role in enhancing the smoking experience by improving the flavor and quality of tobacco leaves. During natural aging, the metabolic activity of the microbes on the surface of tobacco leaves will be greatly changed. Besides, starch and protein are two of the main macromolecular compounds causing the poor smoking quality of tobacco leaves which to be degraded for better tobacco quality. In this study, a bacterium with the simultaneously degrading ability of starch (degradation rate of 33.87%) and protein (degradation rate of 20%) has been screened out from high-class tobacco leaf and then inoculated into low-class tobacco leaf by solid-state fermentation for quality improvement. The changes in components related to carbon and nitrogen showed that the strain had an obvious effect on the quality improvement of tobacco leaves. After that, GC-MS analyses displayed the volatile flavor compounds which become rich and the flavor has been improved. It has been proved that inoculation solid-state fermentation by dominant strain could improve tobacco quality, as well as instead of the traditional natural aging process which greatly shortens the aging process. The work also offers a helpful strategy for solid-state products for deep fermentation.

FIL SSF intraocular lens opacification after pars plana vitrectomy with gas tamponade for traumatic lens luxation and retinal detachment: a case report and literature review.

BACKGROUND: To report a case of sutureless scleral-fixated hydrophilic intraocular lens (FIL SSF IOL, Soleko, Italy) opacification following pars plana vitrectomy surgery using sulfur hexafluoride (SF6) for traumatic lens luxation associated with retinal detachment. CASE PRESENTATION: A 77-year-old woman was referred to our emergency department after blunt trauma in her right eye. At the ophthalmic evaluation, visual acuity was hand movement, biomicroscopy showed pseudoexfoliation syndrome and a traumatic lens luxation in the vitreous chamber. The patient underwent pars plana vitrectomy, subluxated cataract explantation, and FIL SSF IOL implant. During surgery, an inferior retinal detachment was encountered, requiring 20% SF6 gas tamponade. No adverse events were encountered. One month postoperatively, visual acuity (BCVA) improved to 0,3 logMAR. At the 3-month follow-up, the patient presented with BCVA of 0,5 logMAR, and biomicroscopy showed a minimal IOL opacification. Six months postoperatively, BCVA decreased to 1.0 logMAR, and diffuse, IOL opacification was noted at slit lamp examination. The patient refused any other surgical intervention for IOL exchange. CONCLUSIONS: Although hydrophilic IOL opacification gas related is known, to the best of our knowledge, this is the first case reported in the literature of FIL SSF IOL opacification after pars plana vitrectomy with gas tamponade for retinal detachment.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry.

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

HighlightsBiosurfactants are important biotechnological products with unique superior potentials over their synthetic counterparts.Physiological roles of biosurfactants in survival of the producing microorganisms under unfavorable conditions.Classification of biosurfactants.Biosurfactant types produced by yeasts, fungi and bacteria.Production efficiency optimization of biosurfactants.Utilization of agro-industrial wastes as economic renewable substrates for biosurfactants production.Production of biosurfactants by solid-state and submerged fermentation industries.Potential applications of biosurfactants in environment.Glycolipid biosurfactants efficiently control pathogens causing their membrane disruption.Potential application of biosurfactants in the oil industry.Natural surfactants are novel capping and stabilizing agents for nanoparticles synthesis.

Enhancement in Bacterial Cellulolytic Enzyme Production Using Acid-Pretreated Banana Peel Waste: A Comparative Evaluation.

Banana peel waste is one of the major contributors in the issue raised from solid waste, however, it can be valorized effectively due to high content of cellulose and hemicellulose. Significant conversion of banana waste includes cellulolytic enzymes and bioenergy production. In the present study, bacterial cellulase was produced using raw banana peel and ripe banana peel under SSF. Additionally, impact of acid pretreatment was investigated as one of strategy to improve cellulolytic enzyme production. A comparative evaluation of raw and ripe banana peels showed that ripe banana peels showed better enzyme production after pretreatment with 0.5% dilute HCl acid. In the series of enhancement of the enzyme production, temperature and pH of the SSF medium were also investigated, and found temperature 35 °C and pH 6.0 were optimum to produce maximum 3.5-U/ml FPA, 39-U/ml BGL, and 54-U/ml EG in 18-h SSF incubation. The study presented eco-friendly waste management to produce industrial enzyme for its promising application in waste valorization and biorefinery area.

Screening of Chitinolytic Microfungi and Optimization of Parameters for Hyperproduction of Chitinase Through Solid-State Fermentation Technique.

This study is intended for the production of chitinase enzyme from locally isolated fungal strains. Out of 10 isolated fungal strains from district Gujrat, Punjab, Pakistan, Aspergillus terreus SB3 (accession number ON738571) was found with maximum chitinolytic potential (80.8 U/mL/min). By applying central composite design (CCD) through response surface methodology (RSM) under solid-state fermentation (SSF), eight nutritional and physical parameters were optimized. Among these, temperature, substrate concentration, and pH were found as significant factors toward chitinase production in the first phase. Moisture and nitrogen source were found as significant factors during second phase of chitinase production. The effect of incubation period, inoculum size, and magnesium source was observed as non-significant. The chitinase activity was successfully enhanced more than 2 folds up to 198.5 U/mL/min at optimized conditions of 35 °C temperature, 4.5 pH, 20 g substrate concentration, 4-day incubation period, 55% moisture content, 4.5 mL inoculum size, 0.25 g ammonium sulfate, and 0.30 g magnesium sulfate using RSM design. It was also found that Ganoderma lucidum (bracket fungus) has more potential to be used for the production of chitinase compared to fish scales. The present study exhibited Aspergillus terreus SB3 (ON738571) as a potential indigenous strain capable for hyperproduction of chitinase through cheap fermentation technology that might be employed for the eradication of chitin-based sea waste to remove the marine pollution.

Root vertical spatial stress: A method for enhancing rhizosphere effect of plants in subsurface flow constructed wetland.

The depth of the substrate of subsurface flow (SSF) constructed wetlands (CWs) is closely related to their cost and operation stability. To explore the physiological regulation mechanism of wetland plants and pollutant removal potential of SSF CWs under "vertical spatial stress of roots" (by greatly reducing the depth of the substrate in SSF CWs to limit the vertical growth space of roots, VSSR), the physiological response and wetland purification effect of a 0.1 m Canna indica L. CW under VSSR were studied compared with conventional SSF CWs (0.6 m, 1.2 m). The results demonstrated that VSSR significantly enhanced the dissolved oxygen (DO) concentration (p < 0.05) within the SSF CWs, with the DO in 0.1 m CW remaining stable at over 3 mg/L. Under the same hydraulic retention time (HRT), VSSR significantly improved the removal effect of pollutants (p < 0.05). The removal rates of COD, NH4+-N, and total phosphorus (TP) remained above 87%, and the mean removal rates of total nitrogen (TN) reached 91.71%. VSSR promoted the morphological adaptation mechanisms of plants, such as significantly increased root-shoot ratio (p < 0.05), changed biomass allocation. Plants could maintain the stability of the photosynthetic mechanism by changing the distribution of light energy. The results of microbial community function prediction demonstrated that aerobic denitrification was the main mechanism of N transformation in the 0.1 m CW under VSSR. VSSR could induce the high root activity of plants, augment the concentration of root exudates, enhance the redox environment of the plant rhizosphere, further foster the enrichment of aerobic denitrifying bacteria, and strengthen the absorption efficiency of wetland plants and substrate, thus achieving an efficient pollutant removal capacity. Studies showed that VSSR was an effective means to enhance the rhizosphere effect of plants and pollutant removal in SSF CWs.

Bacterial cellulase production via co-fermentation of paddy straw and Litchi waste and its stability assessment in the presence of ZnMg mixed-phase hydroxide-based nanocomposite derived from Litchi chinensis seeds.

Co-fermentation via co-cultured bacterial microorganisms to develop enzymes in solid-state fermentation (SSF) is a promising approach. This strategy is imperative in a series of sustainable and effective approaches due to superior microbial growth and the use of a combination of inexpensive feedstocks for enzyme production wherein mutually participating enzyme-producing microbial communities are employed. Moreover, the addition of nanomaterials to this technique may aid in its prominent advantage of enhancing enzyme production. This strategy may be able to decrease the overall cost of the bioprocessing to produce enzymes by further implementing biogenic, route-derived nanomaterials as catalysts. Therefore, the present study attempts to explore endoglucanase (EG) production using a bacterial coculture system by employing two different bacterial strains, namely, Bacillus subtilis and Serratia marcescens under SSF in the presence of a ZnMg hydroxide-based nanocomposite as a nanocatalyst. The nanocatalyst based on ZnMg hydroxide has been prepared via green synthesis using Litchi waste seed, while SSF for EG production has been conducted using cofermentation of litchi seed (Ls) and paddy straw (Ps) waste. Under an optimized substrate concentration ratio of 5:6 Ps:Ls and in the presence of 2.0 mg of nanocatalyst, the cocultured bacterial system produced 1.6 IU/mL of EG enzyme, which was ~1.33 fold higher as compared to the control. Additionally, the same enzyme showed its stability for 135 min in the presence of 1.0 mg of nanocatalyst at 38 °C. The nanocatalyst has been synthesized using the green method, wherein waste litchi seed is used as a reducing agent, and the nanocatalyst could be employed to improve the production and functional stability of crude enzymes. The findings of the present study may have significant application in lignocellulosic-based biorefinaries and cellulosic waste management.

Instant Controlled Pressure-Drop (DIC) for Volatile Compound Extraction and Bioethanol Production from Empty Aleppo Pinecones and Eucalyptus Chips: Process Optimization and Statistical Modeling.

Several plant species contain volatile compounds extracted as "essential oils" through different technologies. After essential oil extraction, the residual solid is a lignocellulosic solid waste. This work proposes the instant controlled pressure-drop (DIC) technology to autovaporize volatile compounds and modify the lignocellulosic matrix. Indeed, DIC technology is a thermomechanical process based on short-time/high-temperature and pressure pretreatment. It enhances the saccharification and fermentation process (SSF) for bioethanol production. A 3-variable design of experiments optimized the DIC processing parameters to reach 100% efficiency (EE) of volatile compound extraction using response surface methodology (RSM). Eucalyptus chips presented 50 volatile identified compounds after 7 min of DIC treatment. 1,8-Cineole, ß-phellandrene, aromadendrene, eudesmol, and spathulenol are the most important volatile compounds. The empty Aleppo pinecones delivered 32 volatile compounds in 5 min of DIC treatment, the most important of which were caryophyllene, nortricyclene, verbenol, and camphor. After the autovaporization extraction stage, solid fraction residues were hydrolyzed and fermented in the same stirred bioreactor, using SSF strategy for 72 h at 37 °C. The highest bioethanol yields reached 73.9% and 54.82% (g per 100 g DM) from eucalyptus chip and empty Aleppo pinecone, respectively.

Plant-based meat analogue of soy proteins by the multi-strain solid-state mixing fermentation.

In order to mitigate or reduce global environmental concerns, health issues, sustainability and animal welfare issues, artificial meat presents a potential solution to consumers' demand for meat. In this study, strains such as Rhodotorula mucilaginosa and Monascus purpureus that can produce meat-like pigments were first identified and used in soy protein plant-base fermentation, where fermentation parameters as well as inoculum size were determined to simulate plant-base meat analogue (PBMA). Meanwhile, the resemblance between the fermented soy products and the fresh meat was examined in terms of color, texture, and flavor characteristics. Furthermore, the addition of Lactiplantibacillus plantarum can perform reassortment and fermentation simultaneously to improve the quality of soy fermentation products in terms of texture and flavor. The results offer a novel way to produce PBMA and also shed light on future research into plant-based meat-like products with the appropriate meat characteristics.

High bioethanol titer and yield from phosphoric acid plus hydrogen peroxide pretreated paper mulberry wood through optimization of simultaneous saccharification and fermentation.

The optimization of key simultaneous saccharification and fermentation (SSF) parameters for bioethanol production from phosphoric acid plus hydrogen peroxide pretreated paper mulberry wood was carried out under two isothermal scenarios; the yeast optimum and trade-off temperatures of 35 and 38 °C, respectively. The optimal conditions established for SSF at 35 °C (solid loading: 16%; enzyme dosage: 9.8 mg protein/g glucan; and yeast concentration: 6.5 g/L) achieved high ethanol titer and yield of 77.34 g/L and 84.60% (0.432 g/g), respectively. These corresponded to 1.2 and 1.3-folds increases, compared to the results of the optimal SSF at a relatively higher temperature of 38 °C. The information from this study would prove beneficial in reducing process energy demands to some extent, while also helping to achieve high levels of both ethanol concentration and yield that are desired in cellulosic ethanol production.

Diversity and characteristics of commercial Red Sea fish species based on fish market survey: informing management to reduce the risk of overfishing.

In small-scale fisheries (SSFs), where the sampling of many small boats and landing sites sometimes is not practical, fish market surveys represent an alternative way to obtain key fisheries data. This study analyses the diversity and characteristics of commercial Red Sea fish species landed in the Egyptian coast, including family, species-specific abundance, biomass, size and price by surveying the largest local fish market on the Egyptian Red Sea coast, over the course of a year (July 2021-June 2022) to also reflect any seasonality of these variables. Based on 53 survey visits, a total of 131,795 fish individuals, belonging to 111 species, and 22 families, were identified, recorded and measured. The analysis focused on the 60 most abundant species (104,420 individuals, 15 families). The surveys revealed that the most abundant families were Serranidae, Lethrinidae and Scaridae. Carangidae also was one of the most important families in terms of biomass. The most abundant species were Lethrinus mahsena, Sargocentron spiniferum and Lethrinus nebulosus. About 60% of revenue comes from the four families Serranidae, Lethrinidae, Scaridae and Lutjanidae. In terms of prices, the most expensive categories were species belonging to Serranidae, Lethrinidae and Lutjanidae families, such as Plectropomus pessuliferus marisrubri, Argyrops spinifer, L. nebulosus and Variola louti. The overall mean prices were higher in spring and summer months likely due to tourism flows. The mean size of many species, including the most valuable and abundant ones, is below the length of maturity. These results provide important benchmarks for monitoring future changes and shed important insights for fisheries management. Co-organised Dutch auctions would provide reliable data when combined with a strict monitoring effort to avoid any sale of the catch outside these official auctions. Other monitoring tools and methods are also recommended in the discussion.