ABSTRACT
Enhancing the velocity of the oxidation-reduction cycle is crucial for improving the catalytic efficiency of Fenton processes. Therefore, the development of an effective strategy for wastewater degradation at low temperatures is essential. In this context, we present the preparation of an NH2-MIL-88B (Fe)/CuInS2 S-scheme heterojunction. Specifically, CuInS2 nanoparticles are introduced onto the Ferro-organic skeleton, resulting in the exposure of a significant number of active surface sites. Furthermore, NH2-MIL-88B (Fe)/CuInS2 demonstrates an extended photoresponse into the long-wavelength region, which contributes to its excellent photothermal properties. Notably, the degradation rate of tetracycline in low-temperature aqueous environments reaches as high as 99.7â¯%, several times higher than that of the original sample. Additionally, the hydrogen production of NH2-MIL-88B (Fe)/CuInS2 is 2.23 times that of single NH2-MIL-88B (Fe) and 3.46 times that of single CuInS2. Moreover, the system exhibits good H2O2 evolution performance, forming an efficient photo-Fenton system. The charge transfer process in S-scheme heterojunction is confirmed using in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance. Both transient photoluminescence and photo electrochemical tests further validate the enhanced photoelectrochemical properties of the NH2-MIL-88B (Fe)/CuInS2 S-scheme heterojunction. The exceptional performance of this system can be attributed to the synergistic effects of the S-scheme heterojunction and the bimetallic codoped photo-Fenton system. This research presents a novel approach for the breakdown of low-temperature wastewater using an improved photocatalytic Fenton system.
ABSTRACT
The synthesis of the accurate composition and morphological/structural design of multielement semiconductor materials is considered an effective strategy for obtaining high-performance hybrid photocatalysts. Herein, sulfur vacancy (Vs)-bearing In2S3/CuInS2 microflower heterojunctions (denoted Vs-In2S3/CuInS2) were formed in situ using In2S3 microsphere template-directed synthesis and a metal ion exchange-mediated growth strategy. Photocatalysts with flower-like microspheres can be obtained using hydrothermally synthesized In2S3 microspheres as a template, followed by Ostwald ripening growth during the metal cation exchange of Cu+ and In3+. The optimal heterostructured Vs-In2S3/CuInS2 microflowers exhibited CO and CH4 evolution rates of 80.3 and 11.8 µmol g-1 h-1, respectively, under visible-light irradiation; these values are approximately 4 and 6.8 times higher than those reported for pristine In2S3, respectively. The enhanced photocatalytic performance of the Vs-In2S3/CuInS2 catalysts could be attributed to the synergistic effects of the following factors: (i) the constructed heterojunctions accelerate charge-carrier separation; (ii) the flower-like microspheres exhibit highly uniform morphologies and compositions, which enhance electron transport and light harvesting; and (iii) the vs. may trap excited electrons and, thus, inhibit charge-carrier recombination. This study not only confirms the feasibility of the design of heterostructures on demand, but also presents a simple and efficient strategy to engineer metal sulfide photocatalysts with enhanced photocatalytic performance.
ABSTRACT
Copper indium sulfide (CuInS2) exhibits strong visible light absorption and thus has the potential for good photocatalytic activity; however, rapid charge recombination limits its practical usage. An intriguing strategy to overcome this issue is to couple CuInS2 with another semiconductor to form a heterojunction, which can improve the charge carrier separation and, hence, enhance the photocatalytic activity. In this study, photocatalysts comprising CuInS2 with a secondary CuS phase (termed CuInxSy) and CuInxSy loaded with ZnS (termed ZnS@CuInxSy) were synthesized via a microwave-assisted method. Structural and morphological characterization revealed that the ZnS@CuInxSy photocatalyst comprised tetragonal CuInS2 containing a secondary phase of hexagonal CuS, coupled with hexagonal ZnS. The effective band gap energy of CuInxSy was widened from 2.23 to 2.71 as the ZnS loading increased from 0 to 30%. The coupling of CuInxSy with ZnS leads to long-lived charge carriers and efficient visible-light harvesting properties, which in turn lead to a remarkably high activity for the photocatalytic degradation of brilliant green (95.6% in 5 h) and conversion of 4-nitrophenol to 4-nitrophenolate ions (95.4% in 5 h). The active species involved in these photocatalytic processes were evaluated using suitable trapping agents. Based on the obtained results, photocatalytic mechanisms are proposed that emphasize the importance of h+, O2â¢-, and OH- in photocatalytic processes using ZnS@CuInxSy.
ABSTRACT
Fluorescent nanoparticles known as quantum dots (QDs) have unique properties that make them useful in biomedicine. Specifically, CdSe/ZnS QDs, while good at fluorescing, show toxicity. Due to this, safer alternatives have been developed. This study uses a tetrazolium dye (XTT) viability assay, reactive oxygen species (ROS) fluorescent imaging, and apoptosis to investigate the effect of QD alternatives InP/ZnS, CuInS2/ZnS, and nitrogen-doped carbon dots (NCDs) in liver cells. The liver is a possible destination for the accumulation of QDs, making it an appropriate model for testing. A cancerous liver cell line known as HepG2 and an immortalized liver cell line known as THLE-2 were used. At a nanomolar range of 10-150, HepG2 cells demonstrated no reduced cell viability after 24 h. The XTT viability assay demonstrated that CdSe/ZnS and CuInS2/ZnS show reduced cell viability in THLE-2 cells with concentrations between 50 and 150 nM. Furthermore, CdSe/ZnS- and CuInS2/ZnS-treated THLE-2 cells generated ROS as early as 6 h after treatment and elevated apoptosis after 24 h. To further corroborate our results, apoptosis assays revealed an increased percentage of cells in the early stages of apoptosis for CdSe/ZnS-treated (52%) and CuInS2/ZnS-treated (38%) THLE-2. RNA transcriptomics revealed heavy downregulation of cell adhesion pathways such as wnt, cadherin, and integrin in all QDs except NCDs. In conclusion, NCDs show the least toxicity toward these two liver cell lines. While demonstrating less toxicity than CdSe/ZnS, the metallic QDs (InP/ZnS and CuInS2/ZnS) still demonstrate potential concerns in liver cells. This study serves to explore the toxicity of QD alternatives and better understand their cellular interactions.
ABSTRACT
Polypyrrole-coated CuInS2 (CuInS2@PPy) composite was prepared through the chemical vapor transport method and subsequent in situ polymerized coating strategy. In this unique nanoarchitecture, the PPy coating layer plays a crucial role in improving the conductivity of the composite, suppressing the volume change of CuInS2, and maintaining the structural integrity of electrode material upon cycling. In addition, the electrochemical reaction mechanism and kinetics of CuInS2@PPy were investigated in-depth. Benefitting from the synergism of its combinational intercalation-conversion-intercalation reaction mechanism and the high conductivity of the PPy coating layer, CuInS2@PPy electrode exhibits superior rate capability and cycling stability for sodium-ion batteries, with a capacity of 404.8 mA h g-1 at 4 A g-1 over 2500 cycles.
ABSTRACT
Effective charge separation and migration pose a critical challenge in the field of solar-driven hydrogen production. In this work, a Z-scheme structured CuInS2/ZnIn2S4 heterojunction was successfully fabricated through a two-step hydrothermal synthesis method to significantly enhance the efficiency of solar-to-hydrogen energy conversion. Structural characterization revealed that the lattice-matched CuInS2/ZnIn2S4 heterojunction exhibits an enlarged interfacial contact area, which facilitates the transfer and separation of photogenerated charges. Microscopic analysis indicated that the CuInS2/ZnIn2S4 composite material has a tightly interwoven interface and a morphology resembling small sugar cubes. Photoelectrochemical spectroscopy analysis demonstrated that the heterojunction structure effectively enhances visible light absorption and charge separation efficiency, leading to an improvement in photocatalytic activity. Hydrogen production experimental data indicated that the CuInS2/ZnIn2S4 heterojunction photocatalyst prepared with a CuInS2 content of 20 wt% exhibits the highest hydrogen evolution rate, reaching 284.9 µmol·g-1·h-1. Moreover, this photocatalyst maintains robust photocatalytic stability even after three consecutive usage cycles. This study demonstrated that the Z-scheme CuInS2/ZnIn2S4 heterojunction photocatalyst exhibits enhanced hydrogen evolution efficiency, offering an effective structural design for harnessing solar energy to obtain hydrogen fuel. Therefore, this heterojunction photocatalyst is a promising candidate for practical applications in solar hydrogen production.
ABSTRACT
In this paper, the S-scheme/Schottky heterojunction photocatalyst (CuInS2/Bi/Bi2MoO6, CIS/Bi/BMO) was successfully constructed via a facile in-situ solvothermal method, aimed at enhancing its photocatalytic performance. The results of the study on the photocatalytic degradation of diclofenac sodium (DCF) under simulated solar light irradiation revealed that the as-prepared composite exhibited remarkable catalytic efficiency in comparison to the pristine Bi2MoO6 and CuInS2. The plasmonic bismuth (Bi) was formed during the solvothermal process. Subsequently, CuInS2 and Bi were grown on the surface of Bi2MoO6 leading to forming CIS/BMO S-scheme heterojunction, along with a Schottky junction between Bi and Bi2MoO6. The use of ethylene glycol as a support was the main reason for the significant improvement in photocatalytic efficiency in the degradation of DCF. Moreover, the probable photocatalytic mechanisms for the degradation of DCF had been proposed based on the active species quenching experiments. The eleven degradation products were detected by HPLC-MS, and the degradation reaction pathway of DCF was deduced. Additionally, the CIS/Bi/BMO photocatalyst exhibited a consistently high removal rate after four cycles. This study proposes a new strategy for designing efficient S-scheme/Schottky heterojunction photocatalysts for solar energy conversion.
Subject(s)
Bismuth , Copper , Diclofenac , Photolysis , Bismuth/chemistry , Diclofenac/chemistry , Catalysis , Copper/chemistry , Water Pollutants, Chemical/chemistry , Molybdenum/chemistry , Indium/chemistry , Photochemical ProcessesABSTRACT
The application of covalent organic frameworks (COFs) for the photocatalytic reduction of CO2 is mostly limited by severe charge recombination and low sunlight utilization. Herein, a triazine-based COF with an electron-rich and large π-conjugated system (TCOF) was employed as a building block and integrated with CuInS2 (CIS) to construct a noble-metal-free and high-efficiency photocatalyst for CO2 reduction. The in situ growth of CIS nanosheets on TCOF creates a p-n heterojunction, named CIS@TCOF. Compared with TCOF, the CIS@TCOF heterostructure exhibits a dramatically boosted photocatalytic performance in the reduction of CO2. The produced HCOOH yield over 10 wt % CIS@TCOF can be up to 171.2 µmol g-1 h-1 under visible light irradiation with good reproducibility, which is about 3 times as high as that over TCOF. Further in-depth studies indicate that the introduction of CIS not only enhances the visible light utilization but also restrains the recombination of photogenerated electron-hole pairs efficiently and facilitates the photoinduced charge transfer via the p-n heterojunction system due to the unique structural and compositional features. This research shows the great potential of COFs as efficient photocatalytic carbon fixation materials and provides a versatile route to construct semiconductor-COF heterostructures for photocatalysis.
ABSTRACT
Sensitive and quantitative detection of prostate-specific antigen (PSA) has been determined to be indispensable for clinical diagnostics of prostate cancer, whereas such detection is quite challenging due to the extremely low concentration of biomarkers in human serum samples. In this study, a photoelectrochemical (PEC) sensor was effectively developed for the high-sensitivity analysis of prostate-specific antigen (PSA) using a signal amplification method utilizing sensitized carbon quantum dots (CQDs). In this experiment, cadmium sulfide quantum dots were employed as the substrate materials, and indium copper sulfide quantum dots were loaded on their surfaces. Moreover, the efficient matching of energy levels in these two materials contributed to the generation of photocurrents. The aforementioned heterojunction semiconductor QDs were thus combined with CQDs to produce CQDs on their surfaces. As a result of the presence of CQDs, the ability of heterojunction materials to absorb light was remarkably enhanced, increasing the photocurrent by over ten times. Consequently, in this study, CQDs were combined with PEC sensors, and the developed PEC biosensors exhibited excellent optical performance, sensitivity, repeatability, and stability. The results obtained from the analysis of actual samples were satisfactory and have promising application prospects.
Subject(s)
Biosensing Techniques , Quantum Dots , Male , Humans , Carbon , Prostate-Specific Antigen/analysis , Semiconductors , Biosensing Techniques/methods , Electrochemical Techniques/methods , Limit of Detection , Immunoassay/methodsABSTRACT
The efficient and ecofriendly removal of pharmaceutical antibiotics and heavy metal Cr(VI) from water sources is a crucial challenge in current environmental management. Photocatalysis presents a viable environmentally friendly solution for eliminating organic contaminants and heavy-metal ions. In this study, a novel S-scheme CuInS2/ZnIn2S4 (CIS/ZIS) heterojunction was developed using a one-pot solvothermal method. The optimized CIS/ZIS heterojunction exhibited considerably improved photocatalytic activity for the removal of antibiotics and Cr(VI), achieving over 90% removal for both tetracycline hydrochloride (TC) (20 mg/L) and Cr(VI) (20 mg/L) under visible light irradiation. The study also delved into the effect of coexisting inorganic anions and assessed the cyclic stability of the composite photocatalysts. This enhancement mechanism can be delineated into three key elements. First, the incorporation of the narrow-gap semiconductor CuInS2 effectively augmented the photoabsorption capacity. Second, the inclusion of ZnIn2S4 caused an increase in surface active sites. Most importantly, the internal electric field at the interface between CuInS2 and ZnIn2S4 expedited the separation of photogenerated carriers. Furthermore, the results revealed that superoxide radical and photogenerated holes are the primary active substance responsible for TC removal, while photogenerated electrons play a central role in the photoreduction of Cr(VI). To gain insights into the transport pathways of photogenerated carriers, we conducted experiments with nitrotetrazolium blue chloride (NBT) and photodeposited gold. This study offers an innovative approach to enhancing the photocatalytic performance of ternary In-based materials by constructing S-scheme heterojunctions.
Subject(s)
Anti-Bacterial Agents , Chromium , Electricity , ElectronsABSTRACT
BACKGROUND: The spectral dual-mode response towards analyte has been attracted much attention, benefiting from the higher detection accuracy of such strategy in comparison to single signal readout. However, the currently reported dual-mode sensors for acid phosphatase (ACP) activity are still limited, and most of them more or less exist some deficiencies, such as complicated construction procedure, high-cost, poor biocompatibility, aggregation-caused quenching and limited emission capacity. RESULTS: Herein, we employed Fe3+ functionalized CuInS2/ZnS quantum dots (CIS/ZnS QDs) as nanosensor to develop a novel fluorometric and colorimetric dual-mode assay for ACP activity, combing with ACP-triggered hydrolysis of ascorbic acid 2-phosphate (AAP) into ascorbic acid (AA). The Fe3+ binding to CIS/ZnS QDs can be reduced into Fe2+ during the determination, resulting in the dramatically weakened photoinduced electron transfer (PET) effect and the disappearance of competition absorption. Thus, a highly sensitive ACP assay in the range of 0.22-12.5 U L-1 through fluorescence "turn-on" mode has been achieved with a detection of limit (LOD) of 0.064 U L-1. Meanwhile, the ACP activity can also be quantified by spectrophotometry based on the chromogenic reaction of the formed Fe2+ with 1,10-phenanthroline (Phen). Moreover, the designed nanosensor with good biocompatibility was successfully applied to image and monitor the ACP levels in living cells. SIGNIFICANCE: We believe that the proposed method has remarkable advantages and potential application for ACP assay in terms of the high accuracy, simplicity, low cost, as well as its adequate sensitivity.
Subject(s)
Quantum Dots , Colorimetry , Fluorometry , Spectrophotometry , Biological AssayABSTRACT
Bacterial infections, viral infections and autoimmune diseases pose a considerable threat to human health. Procalcitonin (PCT) has emerged as a biomarker for the detection of these diseases. To ensure accurate and reliable results, we propose a dual-mode approach that incorporates self-validation and self-correction mechanisms. Herein, we develop a dual-mode self-powered photoelectrochemical (PEC) and colorimetric sensor to determine PCT. The self-powered PEC sensor was constructed with a photoanode of spherical nanoflower-MoS2/Cu2ZnSnS4/Bi2S3 material and a photocathode of CuInS2 material. Ni4Cu2 bimetallic hollow nanospheres (BHNs) possess superoxide dismutase and catalase performance, which facilitate superoxide anion radical (·O2-) and H2O2 circulating generation, promoting the separation of photogenerated electrons and holes to amplify photocurrent signal. Thus Ni4Cu2 BHNs is used as a marker material for PEC sensor. Meanwhile, in colorimetric mode, Ni4Cu2 BHNs converts blue oxTMB to a colourless TMB for colorimetric detection of PCT. Based on this principle, dual-mode determination of PCT with high sensitivity is achieved. The dual-mode method not only demonstrates outstanding properties and practicability, but also presents an effective, highly efficient and reliable method for detecting PCT.
Subject(s)
Biosensing Techniques , Nanospheres , Humans , Nanospheres/chemistry , Procalcitonin , Molybdenum/chemistry , Hydrogen Peroxide , Colorimetry , Electrochemical Techniques/methods , Biosensing Techniques/methods , Limit of DetectionABSTRACT
A photoelectrochemical (PEC) immunosensor was designed based on MgIn2S4-decorated inorganic halide perovskite CsPbBr3 combined with the signal polarity conversion strategy for neuron-specific enolase (NSE) detection. CsPbBr3 was applied as the basic photoactive material owing to its excellent optical and electronic properties, which provide a good PEC performance for sensor construction. In order to improve the stability of this perovskite, the three-dimensional flower-like MgIn2S4 with a desirable direct band gap was applied to enhance the PEC response. Also, the excellent structure of MgIn2S4 provides large surface-active sites for CsPbBr3 loaded. For enhancing the detection sensitivity of PEC immunosensor, p-type CuInS2 was used as a signal probe which fixed on detection antibody (Ab2). When the target NSE was present, the photogenerated electrons produced by CuInS2 were transferred to the test solution, and the polarity of PEC signal changes. Based on the above photosensitive materials and signal conversion strategy, the proposed PEC immunosensor showed favorable detection performance, and the linear detection range is 0.0001 ~ 100 ng/mL with a 38 fg/mL of detection limit. The proposed strategy improved the adhibition of CsPbBr3 in the analytical chemistry field as well as provided a reference method for other protein detections.
Subject(s)
Biosensing Techniques , Immunoassay , Phosphopyruvate Hydratase , AntibodiesABSTRACT
A sensitive signal-on photoelectrochemical aptasensor for antibiotic determination was constructed based on the energy level matching between ferrocene and CuInS2. P-type CuInS2 microflower was complexed with reduced graphene oxide (CuInS2/rGO) to get photocathode current with good photoelectric conversion efficiency and stability. Then, hairpin DNA (HP) was covalently bonded to the electrode surface. A triple helix DNA (THMS) was used as a molecular switch. After the specific recognition between target and THMS in homogeneous solution, ferrocene labeled probe (Fc-T2) was released. Finally, Fc-T2 was captured by the HP, which leaded the obvious increase of photocurrent for the energy level matching between ferrocene and CuInS2. The increase of the photocurrent signal was proportional to the concentration of target amoxicillin (AMOX), the linear range was 100 fM-100 nM with detection limit of 19.57 fM. Meanwhile, the method has been successfully applied for milk and lake water samples analysis with satisfactory results.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Ferrous Compounds , Anti-Bacterial Agents , Amoxicillin , Biosensing Techniques/methods , Metallocenes/chemistry , Electrochemical Techniques/methods , DNA/chemistry , Aptamers, Nucleotide/chemistry , Limit of DetectionABSTRACT
Electrochemically converting CO2 back into fuels and chemicals is promising in alleviating the greenhouse effect worldwide. Various high-efficiency catalysts have been achieved, yet the unsatisfied structural stability under CO2 electrolysis conditions restricts their practical application. Herein, a sub-5 nm sized CuInS2 quantum dots (CIS-QDs) based electrocatalyst for converting CO2 into CO are developed. Taking advantage of the stable MâCh (metal-chalcogenide) covalent bonds, and unique p-block metal properties, the as-prepared catalyst exhibits excellent structural stability under large overpotentials and can achieve a high CO Faradaic efficiency (FE) of 86% (total CO2 reduction FE of 89%) at -0.65 V versus reversible hydrogen electrode with long-term durability of 40 h and outstanding current densities of 10.6 mA cm-2 simultaneously. Furthermore, detailed electrochemical analyses revealed that the excellent performance of the as-prepared catalysts shall be attributed to the high-density active sites and fast charge transfer brought by the ultrasmall size of CIS-QDs. This work provides insights into the design of high-density and stable catalytic sites for developing high-performance electrocatalysts.
ABSTRACT
We present the results of a temperature-dependent photoluminescence (PL) spectroscopy study on CuInS2 quantum dots (QDs). In order to elucidate the influence of QD size on PL temperature dependence, size-selective precipitation was used to obtain several nanoparticle fractions. Additionally, the nanoparticles' morphology and chemical composition were studied using transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The obtained QDs showed luminescence in the visible-near infrared range. The PL energy, linewidth, and intensity were studied within an 11-300 K interval. For all fractions, a temperature decrease led to a shift in the emission maximum to higher energies and pronounced growth of the PL intensity down to 75-100 K. It was found that for large particle fractions, the PL intensity started to decrease, with temperature decreasing below 75 K, while the PL intensity of small nanoparticles remained stable.
ABSTRACT
Hydrogen production, catalytic organic synthesis, carbon dioxide reduction, environmental purification, and other major fields have all adopted photocatalytic technologies due to their eco-friendliness, ease of use, and reliance on sunlight as the driving force. Photocatalyst is the key component of photocatalytic technology. Thus, it is of utmost importance to produce highly efficient, stable, visible-light-responsive photocatalysts. CIS stands out among other visible-light-response photocatalysts for its advantageous combination of easy synthesis, non-toxicity, high stability, and suitable band structure. In this study, we took a brief glance at the synthesis techniques for CIS after providing a quick introduction to the fundamental semiconductor features, including the crystal and band structures of CIS. Then, we discussed the ways doping, heterojunction creation, p-n heterojunction, type-II heterojunction, and Z-scheme may be used to modify CIS's performance. Subsequently, the applications of CIS towards pollutant degradation, CO2 reduction, water splitting, and other toxic pollutants remediation are reviewed in detail. Finally, several remaining problems with CIS-based photocatalysts are highlighted, along with future potential for constructing more superior photocatalysts.
Subject(s)
Environmental Pollutants , Environmental Restoration and Remediation , Catalysis , Light , TechnologyABSTRACT
Ternary CuInS2 quantum dots (QDs) with photoluminescence that is tunable from the visible to the near-infrared (NIR) region are promising light-emitters for consumer electronics due to the absence of toxic elements such as Pb, Cd, or As. Despite the compelling performance of visible-light-emitting CuInS2 QDs, reports on NIR emission remain limited, with modest efficiencies at wavelengths beyond 900 nm. In this work, the facile synthesis of NIR-emitting CuInS2 /ZnS QDs is reported. A combination of two sulfur precursors w as used in the synthesis, comprising 1-dodecanethiol (DDT) and hexamethyldisilathiane (HMDS). The reactive HMDS facilitates faster nucleation and leads to a higher density of emissive Cu-deficiency sites. The resulting QDs exhibit high photoluminescence quantum efficiency (PLQE) of 65% at a long emission wavelength of 920 nm. Using these QDs, NIR light-emitting diodes (LED) are fabricated, which attain an external quantum efficiency (EQE) of 8.2%. This efficiency is comparable to the best reported PbS and InAs QD LEDs, and the emission wavelength exceeds that of lead iodide perovskites. This work thus marks one of the first reports of efficient NIR LEDs based on environmentally benign CuInS2 QDs and may open up promising new applications in consumer electronic products.
Subject(s)
Quantum Dots , Electronics , Light , SulfidesABSTRACT
Heavy metals (HMs) often coexist with organic pollutants (OPs) in real surface water. Is it possible to find a general way that the removal of one from these two pollutants will promote the elimination of another pollutant? Herein, the bi-directional promotion effects (BPEs) on synchronous removal of Cr(VI) (i.e., hexavalent chromium) and OPs were achieved by a SnNb2O6/CuInS2 S-scheme heterojunction. Specifically, the apparent rate constants are 0.161 min-1 [(Cr(VI)] and 0.019 min-1 [Tetracycline hydrochloride (TCH)] in coexisting Cr(VI)/TCH system (which are 3.74 and 1.58 times, respectively, compared to the mono-pollutant system), indicating OPs indeed can act as hole scavengers (electron donors) to consume plenty of photoinduced holes and enable more photoexcited electrons to attend to Cr(VI) photoreduction. More significantly, OPs (i.e., TCH, atrazine and 4-chlorophenol) with different molecular structures possess different adiabatic ionization potentials (AIPs), in an inversely linear relationship with BPEs, i.e., the lower AIP value is, the higher electron-donating ability is, the better BPEs present. Finally, TCH and its degradation intermediates toxicity was forecasted via quantitative structure-activity relationship, demonstrating the toxicity decrease of TCH during the photocatalytic process. This work provides a general strategy for simultaneous removal of contaminants, contributing to wastewater purification.
ABSTRACT
The commercial application of colloidal semiconductor nanocrystals has been realized owing to the development of composite film technology. Here, we demonstrated the fabrication of green and red emissive CuInS2 nanocrystals embedded polymer composite films of equal thickness by using a precise solution casting method. The impacts of polymer molecular weight on the dispersibility of CuInS2 nanocrystals were then systematically studied through evaluating the decrease in transmittance and red shift of emission wavelength. The composite films made from PMMA of small molecular weights exhibited higher transmittance. Applications of these green and red emissive composite films as color converters in remote-type light-emitting devices were further demonstrated.