Crystal structure of Staphylococcus aureus tyrosyl-tRNA synthetase in complex with a class of potent and specific inhibitors.

SB-219383 and its analogues are a class of potent and specific inhibitors of bacterial tyrosyl-tRNA synthetases. Crystal structures of these inhibitors have been solved in complex with the tyrosyl-tRNA synthetase from Staphylococcus aureus, the bacterium that is largely responsible for hospital-acquired infections. The full-length enzyme yielded crystals that diffracted to 2.8 A resolution, but a truncated version of the enzyme allowed the resolution to be extended to 2.2 A. These inhibitors not only occupy the known substrate binding sites in unique ways, but also reveal a butyl binding pocket. It was reported that the Bacillus stearothermophilus TyrRS T51P mutant has much increased catalytic activity. The S. aureus enzyme happens to have a proline at position 51. Therefore, our structures may contribute to the understanding of the catalytic mechanism and provide the structural basis for designing novel antimicrobial agents.

1,4-Disubstituted imidazoles are potential antibacterial agents functioning as inhibitors of enoyl acyl carrier protein reductase (FabI).

1,4-Disubstituted imidazole inhibitors of Staphylococcus aureus and Escherichia coli enoyl acyl carrier protein reductase (FabI) have been identified. Crystal structure data shows the inhibitor 1 bound in the enzyme active site of E. coli FabI.

Inhibitors of bacterial enoyl acyl carrier protein reductase (FabI): 2,9-disubstituted 1,2,3,4-tetrahydropyrido[3,4-b]indoles as potential antibacterial agents.

An SAR study of a screening lead has led to the identification of 2,9-disubstituted 1,2,3,4-tetrahydropyrido[3,4-b]indoles as inhibitors of Staphylococcus aureus enoyl acyl carrier protein reductase (FabI).

Azepanone-based inhibitors of human and rat cathepsin K.

The synthesis, in vitro activities, and pharmacokinetics of a series of azepanone-based inhibitors of the cysteine protease cathepsin K (EC 3.4.22.38) are described. These compounds show improved configurational stability of the C-4 diastereomeric center relative to the previously published five- and six-membered ring ketone-based inhibitor series. Studies in this series have led to the identification of 20, a potent, selective inhibitor of human cathepsin K (K(i) = 0.16 nM) as well as 24, a potent inhibitor of both human (K(i) = 0.0048 nM) and rat (K(i,app) = 4.8 nM) cathepsin K. Small-molecule X-ray crystallographic analysis of 20 established the C-4 S stereochemistry as being critical for potent inhibition and that unbound 20 adopted the expected equatorial conformation for the C-4 substituent. Molecular modeling studies predicted the higher energy axial orientation at C-4 of 20 when bound within the active site of cathepsin K, a feature subsequently confirmed by X-ray crystallography. Pharmacokinetic studies in the rat show 20 to be 42% orally bioavailable. Comparison of the transport of the cyclic and acyclic analogues through CaCo-2 cells suggests that oral bioavailability of the acyclic derivatives is limited by a P-glycoprotein-mediated efflux mechanism. It is concluded that the introduction of a conformational constraint has served the dual purpose of increasing inhibitor potency by locking in a bioactive conformation as well as locking out available conformations which may serve as substrates for enzyme systems that limit oral bioavailability.

Cyclic ketone inhibitors of the cysteine protease cathepsin K.

Cathepsin K (EC 3.4.22.38), a cysteine protease of the papain superfamily, is predominantly expressed in osteoclasts and has been postulated as a target for the treatment of osteoporosis. Crystallographic and structure--activity studies on a series of acyclic ketone-based inhibitors of cathepsin K have led to the design and identification of two series of cyclic ketone inhibitors. The mode of binding for four of these cyclic and acyclic inhibitors to cathepsin K is discussed and compared. All of the structures are consistent with addition of the active site thiol to the ketone of the inhibitors with the formation of a hemithioketal. Cocrystallization of the C-3 diastereomeric 3-amidotetrahydrofuran-4-one analogue 16 with cathepsin K showed the inhibitor to occupy the unprimed side of the active site with the 3S diastereomer preferred. This C-3 stereochemical preference is in contrast to the X-ray cocrystal structures of the 3-amidopyrrolidin-4-one inhibitors 29 and 33 which show these inhibitors to prefer binding of the 3R diastereomer. The 3-amidopyrrolidin-4-one inhibitors were bound in the active site of the enzyme in two alternate directions. Epimerization issues associated with the labile alpha-amino ketone diastereomeric center contained within these inhibitor classes has proven to limit their utility despite promising pharmacokinetics displayed in both series of compounds.

Refined structures of beta-ketoacyl-acyl carrier protein synthase III.

beta-Ketoacyl-acyl carrier protein synthase III (FabH) is a condensing enzyme that plays central roles in fatty acid biosynthesis. Three-dimensional structures of E. coli FabH in the presence and absence of ligands have been refined to 1.46 A resolution. The structures of improved accuracy revealed detailed interactions involved in ligand binding. These structures also provided new insights into the FabH mechanism, e.g. the possible role of a water or hydroxyl anion in Cys112 deprotonation. A structure of the apo enzyme uncovered large conformational changes in the active site, exemplified by the disordering of four essential loops (84-86, 146-152, 185-217 and 305-307) and the movement of catalytic residues (Cys112 and His244). The disordering of the loops leads to greater than 50 % reduction in the FabH dimer interface, suggesting a dynamic nature for an unusually large portion of the dimer interface. The existence of a large solvent-accessible channel in the dimer interface as well as two cis-peptides (cis-Pro88 and cis-Phe308) in two of the disordered loops may explain the observed structural instabilities.

Structure-based combinatorial library design: discovery of non-peptidic inhibitors of caspases 3 and 8.

Structure-based design of a combinatorial array was carried out in order to identify non-peptidic thiomethylketone inhibitors of caspases 3 and 8. Five compounds from the designed array were active against caspase 3, and two were active against caspase 8. A 2.5-A resolution co-crystal structure of caspase 3 and a thiomethylketone array member is reported. The structure-based design strategy has proved useful for identifying caspase inhibitors.

Crystallization of Escherichia coli beta-ketoacyl-ACP synthase III and the use of a dry flash-cooling technique for data collection.

beta-Ketoacyl-acyl carrier protein (ACP) synthase III (FabH) is a condensing enzyme active in the fatty-acid biosynthesis pathway of bacteria. The enzymes of this pathway provide a set of targets for the discovery of previously unknown antibiotics. FabH from Escherichia coli has been crystallized in two crystal forms using the sitting-drop vapor-diffusion technique. The first form crystallized in the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 63.1, b = 65.1, c = 166.5 A; the second form crystallized in the tetragonal space group P4(1)2(1)2, with unit-cell parameters a = b = 72.7, c = 99.8 A. A flash-cooling technique using no cryoprotectant was utilized in obtaining data from the second type of crystals.

Potent and selective nonpeptide inhibitors of caspases 3 and 7 inhibit apoptosis and maintain cell functionality.

Caspases have been strongly implicated to play an essential role in apoptosis. A critical question regarding the role(s) of these proteases is whether selective inhibition of an effector caspase(s) will prevent cell death. We have identified potent and selective non-peptide inhibitors of the effector caspases 3 and 7. The inhibition of apoptosis and maintenance of cell functionality with a caspase 3/7-selective inhibitor is demonstrated for the first time, and suggests that targeting these two caspases alone is sufficient for blocking apoptosis. Furthermore, an x-ray co-crystal structure of the complex between recombinant human caspase 3 and an isatin sulfonamide inhibitor has been solved to 2.8-A resolution. In contrast to previously reported peptide-based caspase inhibitors, the isatin sulfonamides derive their selectivity for caspases 3 and 7 by interacting primarily with the S(2) subsite, and do not bind in the caspase primary aspartic acid binding pocket (S(1)). These inhibitors blocked apoptosis in murine bone marrow neutrophils and human chondrocytes. Furthermore, in camptothecin-induced chondrocyte apoptosis, cell functionality as measured by type II collagen promoter activity is maintained, an activity considered essential for cartilage homeostasis. These data suggest that inhibiting chondrocyte cell death with a caspase 3/7-selective inhibitor may provide a novel therapeutic approach for the prevention and treatment of osteoarthritis, or other disease states characterized by excessive apoptosis.

Crystal structure of the IMP-1 metallo beta-lactamase from Pseudomonas aeruginosa and its complex with a mercaptocarboxylate inhibitor: binding determinants of a potent, broad-spectrum inhibitor.

Metallo beta-lactamase enzymes confer antibiotic resistance to bacteria by catalyzing the hydrolysis of beta-lactam antibiotics. This relatively new form of resistance is spreading unchallenged as there is a current lack of potent and selective inhibitors of metallo beta-lactamases. Reported here are the crystal structures of the native IMP-1 metallo beta-lactamase from Pseudomonas aeruginosa and its complex with a mercaptocarboxylate inhibitor, 2-[5-(1-tetrazolylmethyl)thien-3-yl]-N-[2-(mercaptomethyl)-4 -(phenylb utyrylglycine)]. The structures were determined by molecular replacement, and refined to 3.1 A (native) and 2.0 A (complex) resolution. Binding of the inhibitor in the active site induces a conformational change that results in closing of the flap and transforms the active site groove into a tunnel-shaped cavity enclosing 83% of the solvent accessible surface area of the inhibitor. The inhibitor binds in the active site through interactions with residues that are conserved among metallo beta-lactamases; the inhibitor's carboxylate group interacts with Lys161, and the main chain amide nitrogen of Asn167. In the "oxyanion hole", the amide carbonyl oxygen of the inhibitor interacts through a water molecule with the side chain of Asn167, the inhibitor's thiolate bridges the two Zn(II) ions in the active site displacing the bridging water, and the phenylbutyryl side chain binds in a hydrophobic pocket (S1) at the base of the flap. The flap is displaced 2.9 A compared to the unbound structure, allowing Trp28 to interact edge-to-face with the inhibitor's thiophene ring. The similarities between this inhibitor and the beta-lactam substrates suggest a mode of substrate binding and the role of the conserved residues in the active site. It appears that the metallo beta-lactamases bind their substrates by establishing a subset of binding interactions near the catalytic center with conserved characteristic chemical groups of the beta-lactam substrates. These interactions are complemented by additional nonspecific binding between the more variable groups in the substrates and the flexible flap. This unique mode of binding of the mercaptocarboxylate inhibitor in the enzyme active site provides a binding model for metallo beta-lactamase inhibition with utility for future drug design.

Expression, purification, and crystallization of the Escherichia coli selenomethionyl beta-ketoacyl-acyl carrier protein synthase III.

Bacterial beta-ketoacyl-acyl carrier protein (ACP) synthase III (KAS III, also called FabH) catalyzes the condensation and transacylation of acetyl-CoA with malonyl-ACP. In order to understand the mode of enzyme/substrate interaction and design small molecule inhibitors, we have expressed, purified, and crystallized a selenomethionyl-derivative of E. coli KAS III. Several lines of evidence confirmed that purified selenomethionyl KAS III was homogenous, stably folded, and enzymatically active. Dynamic light scattering, size exclusion chromatography, and mass spectrometry results indicated that selenomethionyl KAS III is a noncovalent homodimer. Diffraction quality crystals of selenomethionyl KAS III/acetyl-CoA complex, which grew overnight to a size of 0.2 mm(3), belonged to the tetragonal space group P4(1)2(1)2.

Crystal structure of beta-ketoacyl-acyl carrier protein synthase III. A key condensing enzyme in bacterial fatty acid biosynthesis.

Beta-ketoacyl-acyl carrier protein synthase III (FabH), the most divergent member of the family of condensing enzymes, is a key catalyst in bacterial fatty acid biosynthesis and a promising target for novel antibiotics. We report here the crystal structures of FabH determined in the presence and absence of acetyl-CoA. These structures display a fold that is common for condensing enzymes. The observed acetylation of Cys(112) proves its catalytic role and clearly defines the primer binding pocket. Modeling based on a bound CoA molecule suggests catalytic roles for His(244) and Asn(274). The structures provide the molecular basis for FabH substrate specificity and reaction mechanism and are important for structure-based design of novel antibiotics.

Molecular basis for triclosan activity involves a flipping loop in the active site.

The crystal structure of the Escherichia coli enoyl reductase-NAD+-triclosan complex has been determined at 2.5 A resolution. The Ile192-Ser198 loop is either disordered or in an open conformation in the previously reported structures of the enzyme. This loop adopts a closed conformation in our structure, forming van der Waals interactions with the inhibitor and hydrogen bonds with the bound NAD+ cofactor. The opening and closing of this flipping loop is likely an important factor in substrate or ligand recognition. The closed conformation of the loop appears to be a critical feature for the enhanced binding potency of triclosan, and a key component in future structure-based inhibitor design.

Cooperative structural dynamics and a novel fidelity mechanism in histidyl-tRNA synthetases.

The crystal structure of the Staphylococcus aureus histidyl-tRNA synthetase apoprotein has been determined at 2.7 A resolution. Several important loops in the active site either become disordered or adopt very different conformations compared to their ligand-bound states. These include the histidine A motif (Arg257-Tyr262) that is essential for substrate recognition, a loop (Gly52-Lys62) that seems to control the communication between the histidine and ATP binding sites, the motif 2 loop (Glu114-Arg120) that binds ATP, and the insertion domain that is likely to bind tRNA. These ligand-induced structural changes are supported by fluorescence experiments, which also suggest highly cooperative dynamics. A dynamic and cooperative active site is most likely necessary for the proper functioning of the histidyl-tRNA synthetase, and suggests a novel mechanism for improving charging fidelity.

Potent dipeptidylketone inhibitors of the cysteine protease cathepsin K.

Cathepsin K (EC 3.4.22.38) is a cysteine protease of the papain superfamily which is selectively expressed within the osteoclast. Several lines of evidence have pointed to the fact that this protease may play an important role in the degradation of the bone matrix. Potent and selective inhibitors of cathepsin K could be important therapeutic agents for the control of excessive bone resorption. Recently a series of peptide aldehydes have been shown to be potent inhibitors of cathepsin K. In an effort to design more selective and metabolically stable inhibitors of cathepsin K, a series of electronically attenuated alkoxymethylketones and thiomethylketones inhibitors have been synthesized. The X-ray co-crystal structure of one of these analogues in complex with cathepsin K shows the inhibitor binding in the primed side of the enzyme active site with a covalent interaction between the active site cysteine 25 and the carbonyl carbon of the inhibitor.

The crystal structure of human procathepsin K.

Cathepsin K is a cysteine protease present in human osteoclasts that plays an important role in bone resorption. Cathepsin K is synthesized as an inactive proenzyme and activated under conditions of low pH. Autoproteolytic processing of the N-terminal 99 amino acid propeptide produces the active, mature form of cathepsin K. It is presumed that the activation of procathepsin K in vivo occurs in the bone resorption pit, which has a low-pH environment. We have determined the structure of human procathepsin K at 2.8 A resolution. The structure of the mature enzyme domain within procathepsin K is virtually identical to that of mature cathepsin K. The fold of the propeptide of procathepsin K is similar to that observed in procathepsins B and L despite differences in length and sequence. A portion of the propeptide occupies the active site cleft of cathepsin K. Hydrophobic interactions, salt bridges, and hydrogen-bonding interactions are observed in the structure of the propeptide and between the propeptide and the mature enzyme of procathepsin K. These interactions suggest an explanation for the stability of the proenzyme. The structure of procathepsin K contributes to an understanding of the molecular basis of inhibition by the propeptide portion of the molecule and activation of this important member of the cysteine protease family.

Use of papain as a model for the structure-based design of cathepsin K inhibitors: crystal structures of two papain-inhibitor complexes demonstrate binding to S'-subsites.

Papain has been used as a surrogate enzyme in a drug design effort to obtain potent and selective inhibitors of cathepsin K, a new member of the papain superfamily of cysteine proteases that is selectively and highly expressed in osteoclasts and is implicated in bone resorption. Here we report the crystal structures of two papain-inhibitor complexes and the rational design of novel cathepsin K inhibitors. Unlike previously known crystal structures of papain-inhibitor complexes, our papain structures show ligand binding extending deep within the S'-subsites. The two inhibitor complexes, carbobenzyloxyleucinyl-leucinyl-leucinal and carbobenzyloxy-L-leucinyl-L-leucinyl methoxymethyl ketone, were refined to 2.2- and 2.5-A resolution with R-factors of 0.190 and 0. 217, respectively. The S'-subsite interactions with the inhibitors are dominated by an aromatic-aromatic stacking and an oxygen-aromatic ring edge interaction. The knowledge of S'-subsite interactions led to a design strategy for an inhibitor spanning both subsites and yielded a novel, symmetric inhibitor selective for cathepsin K. Simultaneous exploitation of both S- and S'-sites provides a general strategy for the design of cysteine protease inhibitors having high specificity to their target enzymes.

Structure-based design of cathepsin K inhibitors containing a benzyloxy-substituted benzoyl peptidomimetic.

Peptidomimetic cathepsin K inhibitors have been designed using binding models which were based on the X-ray crystal structure of an amino acid-based, active site-spanning inhibitor complexed with cathepsin K. These inhibitors, which contain a benzyloxybenzoyl group in place of a Cbz-leucine moiety, maintained good inhibitory potency relative to the amino acid-based inhibitor, and the binding models were found to be very predictive of relative inhibitor potency. The binding mode of one of the inhibitors was confirmed by X-ray crystallography, and the crystallographically determined structure is in close qualitative agreement with the initial binding model. These results strengthen the validity of a strategy involving iterative cycles of structure-based design, inhibitor synthesis and evaluation, and crystallographic structure determination for the discovery of peptidomimetic inhibitors.

Active site cavity of herpesvirus proteases revealed by the crystal structure of herpes simplex virus protease/inhibitor complex.

Human herpes simplex virus type 1 (HSV-1) and type 2 (HSV-2) are responsible for herpes labialis (cold sores) and genital herpes, respectively. They encode a serine protease that is required for viral replication, and represent a viable target for therapeutic intervention. Here, we report the crystal structures of HSV-1 and HSV-2 proteases, the latter in the presence and absence of the covalently bound transition state analog inhibitor diisopropyl phosphate (DIP). The HSV-1 and HSV-2 protease structures show a fold that is neither like chymotrypsin nor like subtilisin, and has been seen only in the recently determined cytomegalovirus (CMV) and varicella-zoster virus (VZV) protease structures. HSV-1 and HSV-2 proteases share high sequence homology and have almost identical three-dimensional structures. However, structural differences are observed with the less homologous CMV protease, offering a structural basis for herpes virus protease ligand specificity. The bound inhibitor identifies the oxyanion hole of these enzymes and defines the active site cavity.