RESUMEN
The application of two computer vision systems (CVS) was evaluated to predict primal and retail cut composition in youthful beef carcasses. Left carcass sides from a total of 634 animals were broken down into primal cuts, scanned using dual-energy x-ray absorptiometry for the prediction of tissue composition and fabricated into retail cuts. Cold carcass camera (CCC) images led to higher R2 values than hot carcass camera (HCC) images. The CVS coefficients of prediction for the primal cut weights ranged from 0.61 to 0.97. For the primal cut tissue composition predictions, R2 values ranged from 0.09 for Brisket HCC bone prediction to 0.82 for Chuck CCC fat prediction. Retail cut weight estimations had similar R2 values, ranging from 0.10 for IMPS 112 (Ribeye roll-denuded ribeye) to 0.99 for IMPS 113C (semi-boneless chuck) both using CCC. The results suggest the feasibility of CVS technologies to predict beef primal and retail cuts weights together with tissue composition, and yield percentages.
Asunto(s)
Composición Corporal , Carne , Bovinos , Animales , Absorciometría de Fotón , Huesos , Inteligencia ArtificialRESUMEN
This study evaluated whether different colour intensities of ribeye steaks from dark-cutting (B4 grade) beef carcasses (Dark-B4DK/Moderate-B4MD) were similar in appearance and eating quality to steaks from normal (N) carcasses of lower marbling grades (AA or A) as assessed by consumers. The B4MDAAA and B4DK/MDAA had similar raw appearance and eating quality to N carcasses with a one quality downgrade for marbling (P > 0.1), potentially supporting a B4MDAAA and B4DK/MDAA re-class to NAA and NA grades, respectively. Cooked B4DKAAA steaks had greater juiciness and tenderness acceptability (P < 0.01) and similar appearance, flavour and overall acceptability and purchase intent compared to NAA steaks (P > 0.1). However, consumers perceived greater marbling and lower colour acceptability (P < 0.01) in raw B4DKAAA compared to NAA steaks, lowering the purchase intent scores of B4DKAAA steaks (P < 0.01). These results suggest merit for continuing a B4DKAAA segregated grade, unless the superior eating quality of B4DKAAA could offset its poorer raw appearance through consumer education or modified atmosphere packaging.
Asunto(s)
Comportamiento del Consumidor , Carne , Animales , Bovinos , Canadá , Culinaria , GustoRESUMEN
This study used 1076 crossbred steers to evaluate the effects of calf-fed and yearling-fed beef production systems, implant strategies (with and without implants), and their interactions on the primal tissue composition (lean and fat components) of individual primal cuts using complete carcass dissection data. The results indicate that production system × implant interactions affected loin and rib primal weight percentages as well as marbling (p < 0.05) but did not affect the dissectible lean and fat contents of the individual primal cut (p > 0.05). Implants increased lean and decreased fat tissue contents of primal cut; however, the production system only affected lean content in the loin (p < 0.05) and fat content in the loin, round, and rib (p < 0.05). Redundancy analysis revealed a strong association between Angus breed percentage and marbling, as well as between Simmental breed percentage and multiple primal lean traits. Response surface regression models explained less variability in the tissue composition traits in calf-fed compared with yearling-fed animals, suggesting the need for further exploration using genomic studies.
RESUMEN
This study determined the potential of computer vision systems, namely the whole-side carcass camera (HCC) compared to the rib-eye camera (CCC) and dual energy X-ray absorptiometry (DXA) technology to predict primal and carcass composition of cull cows. The predictability (R2) of the HCC was similar to the CCC for total fat, but higher for lean (24.0%) and bone (61.6%). Subcutaneous fat (SQ), body cavity fat, and retail cut yield (RCY) estimations showed a difference of 6.2% between both CVS. The total lean meat yield (LMY) estimate was 22.4% better for CCC than for HCC. The combination of HCC and CCC resulted in a similar prediction of total fat, SQ, and intermuscular fat, and improved predictions of total lean and bone compared to HCC/CCC. Furthermore, a 25.3% improvement was observed for LMY and RCY estimations. DXA predictions showed improvements in R2 values of 26.0% and 25.6% compared to the HCC alone or the HCC + CCC combined, respectively. These results suggest the feasibility of using HCC for predicting primal and carcass composition. This is an important finding for slaughter systems, such as those used for mature cattle in North America that do not routinely knife rib carcasses, which prevents the use of CCC.
RESUMEN
This study evaluated the relationship among palatability attributes, volatile compounds, and fatty acid (FA) profiles in meat from barley, corn, and blended (50:50, barley and corn) grain-fed steers. Multiple correspondence analysis with three dimensions (Dim) explained 62.2% of the total variability among samples. The Dim 1 and 2 (53.3%) separated pure from blended grain-fed beef samples. Blended grain beef was linked to a number of volatiles including (E,E)-2,4-decadienal, hexanal, 1-octen-3-ol, and 2,3-octanedione. In addition, blended grain-fed beef was linked to fat-like and rancid flavors, stale-cardboard, metallic, cruciferous, and fat-like aroma descriptors, and negative categories for flavor intensity (FI), off-flavor, and tenderness. A possible combination of linoleic and linolenic acids in the blended diet, lower rumen pH, and incomplete biohydrogenation of blended grain-fed polyunsaturates could have increased (p ≤ 0.05) long-chain n-6 fatty acids (LCFA) in blended grain-fed beef, leading to more accumulation of FA oxidation products in the blended than in barley and corn grain-fed meat samples. The Dim 3 (8.9%) allowed corn separation from barley grain beef. Barley grain-fed beef was mainly linked to alkanes and beef positive FI, whereas corn grain-fed beef was associated with pyrazines, in addition to aldehydes related to n-6 LCFA oxidation.
RESUMEN
Evaluating RNA quality and transcriptomic profile of beef muscle over time post-mortem may provide insight into RNA degradation and underlying biological and functional mechanisms that accompany biochemical changes occurring post-mortem during transformation of muscle to meat. RNA was extracted from longissimus thoracis (LT) sampled from British Continental crossbred heifer carcasses (n = 7) stored at 4°C in an abattoir drip cooler at 5 time points post-mortem, i.e., 45 min (0 h), 6 h, 24 h, 48 h, and 72 h. Following RNA-Sequencing, processed reads were aligned to the ARS-UCD1.2 bovine genome assembly. Subsequent differential expression (DE) analysis identified from 51 to 1434 upregulated and 27 to 2256 downregulated DE genes at individual time points compared to time 0 h, showing a trend for increasing counts of both upregulated and downregulated genes over time. Gene ontology and biological pathway term enrichment analyses on sets of DE genes revealed several processes and their timelines of activation/deactivation that accompanied or were involved with muscle transformation to meat. Although the quality of RNA in refrigerated LT remained high for several days post-mortem, the expression levels of several known biomarker genes for meat quality began to change from 24 h onwards. Therefore, to ensure accuracy of predictions on meat quality traits based on the expression levels of those biomarker genes in refrigerated beef muscle tissue, it is crucial that those expression measurements be made on RNA sampled within 24 h post-mortem. The present study also highlighted the need for more research on the roles of mitochondrial genes and non-coding genes in orchestrating muscle tissue processes after death, and how pre-mortem immune status might influence post-mortem meat quality.
Asunto(s)
Carne/análisis , Músculos Paraespinales/química , ARN/genética , Transcriptoma/genética , Animales , Bovinos , Músculo Esquelético/química , Cambios Post Mortem , ARN/químicaRESUMEN
Consumption of red meat contributes to the intake of many essential nutrients in the human diet including protein, essential fatty acids, and several vitamins and trace minerals, with high iron content, particularly in meats with high myoglobin content. Demand for red meat continues to increase worldwide, particularly in developing countries where food nutrient density is a concern. Dietary and genetic manipulation of livestock can influence the nutritional value of meat products, providing opportunities to enhance the nutritional value of meat. Studies have demonstrated that changes in livestock nutrition and breeding strategies can alter the nutritional value of red meat. Traditional breeding strategies, such as genetic selection, have influenced multiple carcass and meat quality attributes relevant to the nutritional value of meat including muscle and fat deposition. However, limited studies have combined both genetic and nutritional approaches. Future studies aiming to manipulate the composition of fresh meat should aim to balance potential impacts on product quality and consumer perception. Furthermore, the rapidly emerging fields of phenomics, nutrigenomics, and integrative approaches, such as livestock precision farming and systems biology, may help better understand the opportunities to improve the nutritional value of meat under both experimental and commercial conditions.
RESUMEN
Intramuscular Ehrlich Chromogen (EC) and pyridinoline (Pyr) concentrations in the gluteus medius (GM) and semitendinosus (ST) from crossbred Angus calf- (n = 14) and yearling-fed (n = 14) steer and mature cow (MC, n = 12) carcasses were related to collagen and intramuscular connective tissue (IMCT) thermal stability and peak Warner-Bratzler shear force (WBSF). In both muscles, Pyr density was greater in MC, while EC concentrations were comparable in calf- and yearling-fed steer muscles and lowest in MC muscles. Thermal denaturation temperature and enthalpy of IMCT were highest in both muscles when from MC, although only total collagen was correlated with WBSF in calf fed-yearling fed steer data. Results confirmed that EC concentration contributed to collagen thermal stability in steer muscles, but decreased it in MC muscles, while Pyr was consistently associated with collagen thermal stability.
Asunto(s)
Colágeno/análisis , Músculo Esquelético/química , Carne Roja/análisis , Aminoácidos/análisis , Animales , Bovinos , Compuestos Cromogénicos/análisis , Colágeno/química , Tejido Conectivo/química , Culinaria , Dieta/veterinaria , Femenino , Calidad de los Alimentos , Masculino , Resistencia al CorteRESUMEN
Dual energy X-ray absorptiometry (DXA) was evaluated for its accuracy in predicting total lean, fat and bone in beef carcass sides and primal cuts. Left carcass sides (nâ¯=â¯316) were broken down into primal cuts, scanned using DXA and then dissected to fat, lean and bone. The DXA estimates for bone, lean and fat from the primals (nâ¯=â¯237) were used to calibrate partial least squares regression (PLSR) models for predicting tissue weights. Models were validated using 79 additional carcass sides, which were broken into primals, scanned using DXA, and subsequently dissected to fat, lean and bone. Models were highly accurate for predicting tissue weights for the entire carcass side (lean R2â¯=â¯0.991, fat R2â¯=â¯0.985 and bone R2â¯=â¯0.941) and within most primal cuts. Results suggest DXA technology can be utilized to accurately predict carcass tissue composition for whole carcass sides and within most primals.
Asunto(s)
Absorciometría de Fotón/métodos , Tejido Adiposo , Huesos , Carne Roja/análisis , Animales , Composición Corporal , Bovinos , Análisis de los Mínimos Cuadrados , Masculino , Músculo EsqueléticoRESUMEN
Consumer demand for quality and healthfulness has led to a higher need for quality assurance in meat production. This requirement has increased interest in near-infrared (NIR) spectroscopy due to the ability for rapid, environmentally friendly, and noninvasive prediction of meat quality or authentication of added-value meat products. This review includes the principles of NIR spectroscopy, pre-processing methods, and multivariate analyses used for quantitative and qualitative purposes in the meat sector. Recent advances in portable NIR spectrometers that enable new online applications in the meat industry are shown and their performance evaluated. Discrepancies between published studies and potential sources of variability are discussed, and further research is encouraged to face the challenges of using NIRS technology in commercial applications, so that its full potential can be achieved.
Asunto(s)
Grasas de la Dieta/análisis , Productos de la Carne/análisis , Carne/análisis , Espectroscopía Infrarroja Corta , Animales , Bovinos , Pollos , Grasas de la Dieta/normas , Carne/normas , Productos de la Carne/normas , Sistemas Microelectromecánicos , Control de Calidad , Ovinos , Espectroscopía Infrarroja Corta/instrumentación , Espectroscopía Infrarroja Corta/métodos , PorcinosRESUMEN
Pork is the most widely eaten meat in the world, but typical feeding practices give it a high omega-6 (n-6) to omega-3 (n-3) fatty acid ratio and make it a poor source of n-3 fatty acids. Feeding pigs n-3 fatty acids can increase their contents in pork, and in countries where label claims are permitted, claims can be met with limited feeding of n-3 fatty acid enrich feedstuffs, provided contributions of both fat and muscle are included in pork servings. Pork enriched with n-3 fatty acids is, however, not widely available. Producing and marketing n-3 fatty acid enriched pork requires regulatory approval, development costs, quality control costs, may increase production costs, and enriched pork has to be tracked to retail and sold for a premium. Mandatory labelling of the n-6/n-3 ratio and the n-3 fatty acid content of pork may help drive production of n-3 fatty acid enriched pork, and open the door to population-based disease prevention polices (i.e., food tax to provide incentives to improve production practices). A shift from the status-quo, however, will require stronger signals along the value chain indicating production of n-3 fatty acid enriched pork is an industry priority.
RESUMEN
BACKGROUND: Identification of genetic variants that are associated with fatty acid composition in beef will enhance our understanding of host genetic influence on the trait and also allow for more effective improvement of beef fatty acid profiles through genomic selection and marker-assisted diet management. In this study, 81 and 83 fatty acid traits were measured in subcutaneous adipose (SQ) and longissimus lumborum muscle (LL), respectively, from 1366 purebred and crossbred beef steers and heifers that were genotyped on the Illumina BovineSNP50 Beadchip. The objective was to conduct genome-wide association studies (GWAS) for the fatty acid traits and to evaluate the accuracy of genomic prediction for fatty acid composition using genomic best linear unbiased prediction (GBLUP) and Bayesian methods. RESULTS: In total, 302 and 360 significant SNPs spanning all autosomal chromosomes were identified to be associated with fatty acid composition in SQ and LL tissues, respectively. Proportions of total genetic variance explained by individual significant SNPs ranged from 0.03 to 11.06% in SQ, and from 0.005 to 24.28% in the LL muscle. Markers with relatively large effects were located near fatty acid synthase (FASN), stearoyl-CoA desaturase (SCD), and thyroid hormone responsive (THRSP) genes. For the majority of the fatty acid traits studied, the accuracy of genomic prediction was relatively low (<0.40). Relatively high accuracies (> = 0.50) were achieved for 10:0, 12:0, 14:0, 15:0, 16:0, 9c-14:1, 12c-16:1, 13c-18:1, and health index (HI) in LL, and for 12:0, 14:0, 15:0, 10 t,12c-18:2, and 11 t,13c + 11c,13 t-18:2 in SQ. The Bayesian method performed similarly as GBLUP for most of the traits but substantially better for traits that were affected by SNPs of large effects as identified by GWAS. CONCLUSIONS: Fatty acid composition in beef is influenced by a few host genes with major effects and many genes of smaller effects. With the current training population size and marker density, genomic prediction has the potential to predict the breeding values of fatty acid composition in beef cattle at a moderate to relatively high accuracy for fatty acids that have moderate to high heritability.
Asunto(s)
Músculos de la Espalda/química , Bovinos/genética , Ácidos Grasos/análisis , Carne Roja/análisis , Animales , Femenino , Estudio de Asociación del Genoma Completo , Masculino , Polimorfismo de Nucleótido SimpleRESUMEN
Since 1950, links between intake of saturated fatty acids and heart disease have led to recommendations to limit consumption of saturated fatty acid-rich foods, including beef. Over this time, changes in food consumption patterns in several countries including Canada and the USA have not led to improvements in health. Instead, the incidence of obesity, type II diabetes and associated diseases have reached epidemic proportions owing in part to replacement of dietary fat with refined carbohydrates. Despite the content of saturated fatty acids in beef, it is also rich in heart healthy cis-monounsaturated fatty acids, and can be an important source of long-chain omega-3 (n-3) fatty acids in populations where little or no oily fish is consumed. Beef also contains polyunsaturated fatty acid biohydrogenation products, including vaccenic and rumenic acids, which have been shown to have anticarcinogenic and hypolipidemic properties in cell culture and animal models. Beef can be enriched with these beneficial fatty acids through manipulation of beef cattle diets, which is now more important than ever because of increasing public understanding of the relationships between diet and health. The present review examines recommendations for beef in human diets, the need to recognize the complex nature of beef fat, how cattle diets and management can alter the fatty acid composition of beef, and to what extent content claims are currently possible for beef fatty acids.
RESUMEN
In order to determine optimum oven cooking procedures for lean beef, the effects of searing at 232 or 260°C for 0, 10, 20 or 30 min, and roasting at 160 or 135°C on semimembranosus (SM) and longissimus lumborum (LL) muscles were evaluated. In addition, the optimum determined cooking method (oven-seared for 10 min at 232°C and roasted at 135°C) was applied to SM roasts varying in weight from 0.5 to 2.5 kg. Mainly, SM muscles seared for 0 or 10 min at 232°C followed by roast at 135°C had lower cooking loss, higher external browning color, more uniform internal color, and were more tender and flavorful (P < 0.05). Roast weights ≥1 kg had lesser cooking loss, more uniform internal color and tender compared to 0.5 kg (P < 0.05). Consequently, roasting at low temperature without searing is the recommended oven cooking procedure; with best response from muscle roast weight ≥1 kg.
RESUMEN
RATIONALE: The traditional methods for analysis of malonaldehyde (MDA), such as the thiobarbituric acid (TBA) assay, require strong acidity at high temperature for derivatization and lack specificity in analysis. Stir bar sorptive extraction (SBSE) coupled with thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS) with in situ derivatization using pentafluorophenylhydrazine (PFPH) under mild conditions is an emerging technique for MDA analysis. METHODS: MDA in meat was derivatized with PFPH at pH ~4 for 1 h at room temperature, forming a relative stable derivative of MDA-PFPH. The derivative of MDA-PFPH was simultaneously extracted using SBSE. Then, MDA-PFPH was thermally released and quantitatively analyzed by GC/MS in selected ion monitoring (SIM) mode. RESULTS: The method of SBSE-TD-GC/MS for MDA analysis with in situ derivatization was optimized and validated with good linearity, specificity and limit of detection/quantification (LOD/LOQ). The method was successfully applied for analysis of MDA in raw and cooked meat (pork). CONCLUSIONS: The SBSE-TD-GC/MS method was suitable to monitor and analyze MDA in meat samples at trace levels. The simple, sensitive and solvent-less method with moderated in situ derivatization can be applied for analysis of MDA in a wide variety of foods and biological samples.
Asunto(s)
Fraccionamiento Químico/métodos , Cromatografía de Gases y Espectrometría de Masas/métodos , Malondialdehído/análisis , Carne/análisis , Animales , Culinaria , Análisis de los Alimentos/métodos , Hidrazinas , Límite de Detección , Modelos Lineales , Reproducibilidad de los Resultados , PorcinosRESUMEN
BACKGROUND: Hamburger is the most consumed beef product in North America, but lacks in nutritional appeal due to its high fat content and high proportion of saturated fatty acids (SFA). Objectives of the present study were to improve the FA profiles of hamburgers made with perirenal fat (PRF) and subcutaneous fat (SCF) when feeding steers different diets along with examining differences in sensory attributes and oxidative stability. Diets included a control diet containing 70:30 red clover silage: barley based concentrate, a diet containing sunflower-seed (SS) substituted for barley, and diets containing SS with 15% wheat dried distillers' grain with solubles (DDGS-15) or 30% DDGS (DDGS-30). Hamburgers were made from triceps brachii and either PRF or SCF (80:20 w/w). RESULTS: Perirenal fat versus SCF hamburgers FA had 14.3% more (P <0.05) 18:0, 11.8% less cis (c)9-18:1 (P <0.05), and 1.82% more total trans (t)-18:1 mainly in the form of t11-18:1. During sensory evaluation, PRF versus SCF hamburgers had greater (P <0.05) mouth coating, but the difference was less than one panel unit. Examining effects of steer diet within PRF hamburgers, feeding the SS compared to the control diet increased (P <0.05) t-18:1 by 2.89% mainly in the form of t11-18:1, feeding DGGS-15 diet led to no further changes (P >0.05), but feeding DDGS-30 diet reduced the proportions of (P <0.05) of t-18:1 chiefly t11-18:1. Feeding SS and DDGS diets had small but significant (P <0.05) effects on hamburger sensory attributes and oxidative stability. CONCLUSIONS: Feeding high-forage diets including SS and 15% DDGS, and taking advantage of the FA heterogeneity between fat depots offers an opportunity to differentially enhance beef hamburgers with 18:2n-6 biohydrogenation products (i.e., t11-18:1) with potential human health benefits without compromising their sensory attributes and oxidative stability during retail display.
RESUMEN
BACKGROUND: The current study evaluated the subcutaneous fatty acid (FA) composition of calf- and yearling-fed steers with or without growth promoting implants. Crossbred steers (n = 112; 267 ± 5.0 kg) of the same contemporary group were allocated to one of four production system and implant strategy based treatments in a completely randomized design with a 2 × 2 factorial arrangement of treatments. RESULTS: There were no interactions (P > 0.05) between production systems and growth promoting implants for the total and individual subcutaneous FA. Yearling as opposed to calf finishing reduced (P < 0.05) subcutaneous proportions of C20:3n-6, trans (t)12-18:1, C14:0, several minor cis-monounsaturated FA (c-MUFA; c9-14:1, c11-16:1, c11-18:1, c12-18:1, c13-18:1, c9-20:1 and c11-20:1), and increased (P < 0 .05) subcutaneous proportions of t11c15-18:2, total and individual branched-chain FA. Subcutaneous fat from steers implanted with growth promotants had higher (P < 0.05) proportions of total polyunsaturated FA (PUFA), total n-6 PUFA, C18:2n-6 and individual t-18:1 isomers (t6 to t10) compared to non-implanted steers. CONCLUSIONS: Overall, current findings show that production systems and growth promotants led to only minor differences in subcutaneous FA composition of beef steers.
RESUMEN
Pork is traditionally low in docosahexanoic acid (DHA, C22:6n-3) and deficient in omega-3 fats for a balanced human diet. DHA as triglycerides was commercially prepared from the microalgae Schizochytrium and injected into fresh pork loins. Treatments of a mixed brine control (CON), 3.1% sunflower oil in mixed brine (SF) and a 3.1% DHA oil in mixed brine (DHA) were injected into pork loins at 10 mL/100 g and grilled at 205°C. After cooking, the CON and SF pork loins contained 0.03 to 0.05 mg DHA/g of pork and the DHA injected loins contained approximately 1.46 mg DHA/g. This also changed the fatty acid profile of omega-6: omega-3 from, 5 to 1 in the CON pork, to a ratio of 1.7 to 1 in DHA pork. The appearance, odor, oxidation rates and sensory taste, as judged by a trained panel, determined the DHA injected meat to be, 'slightly desirable' and gave lower 'off flavour' scores, relative to the CON and SF injected pork. Pork can be fortified with DHA oil to 146 mg/100 g serving, which would meet half the recommended daily omega 3 fatty acid requirements for adult humans and would be desirable in taste.
RESUMEN
Research indicates the fibre angle of the longissimus muscle can vary, depending upon location within a steak and throughout the muscle. Instead of using the original fixed 45 ° or 90 ° cutting angle for testing shear force, a variable angle cutting box can be adjusted so the angles of the knives correspond to the fibre angle of each sample. Within 2 min after cooking to an internal temperature of 71 °C on an open-hearth grill set at 210 °C, a 1 cm by 5 cm core is cut from the steak, parallel to muscle fibre direction, using 2 knife blades set 1 cm apart. This warm core is then subjected to the Slice Shear Force protocol (SSF) to evaluate meat texture. The use of the variable angle cutting box and the SSF protocol provides an accurate representation of the maximal shear force, as the slice and muscle fibres are consistently parallel. Therefore, the variable angle cutting box, in conjunction with the SSF protocol, can be used as a high-throughput technique to accurately evaluate meat tenderness in different locations of the longissimus muscle and, potentially, in other muscles.
Asunto(s)
Análisis de los Alimentos/instrumentación , Carne/normas , Animales , Bovinos , Análisis de los Alimentos/métodos , Músculo Esquelético/química , Resistencia al CorteRESUMEN
Colour stability is a very important parameter for meat retail display, as appearance of the product is the deciding factor for consumers at time of purchase. This study investigated the possibility of extending appearance shelf-life through the combined use of packaging method (overwrapping - OVER, modified atmosphere - MAP, vacuum skin packaging - VSP and a combination of modified atmosphere and vacuum skin packaging - MAPVSP) and antioxidants (vitamin E enriched beef). Retail attributes (appearance, lean colour, % surface discolouration), as well as colour space analysis of images for red, green and blue parameters were measured over 18days. MAPVSP provided the most desirable retail appearance during the first 4days of retail display, while VSP-HB had the best colour stability. Overall, packaging type was more influential than α-tocopherol levels on meat colour stability, although α-tocopherol levels (>4µgg(-1) meat) had a protective effect when using high oxygen packaging methods.