RESUMEN
The application of sequence-defined macromolecules in material science remains largely unexplored due to their challenging, low yielding and time-consuming synthesis. This work first describes a step-economical method for synthesizing unnatural sequence-defined oligoamides through fluorenylmethyloxycarbonyl chemistry. The use of a monodisperse soluble support enables homogeneous reactions at elevated temperature (up to 65 °C), leading to rapid coupling times (<10 min) and improved synthesis protocols. Moreover, a one-pot procedure for the two involved iterative steps is demonstrated via an intermediate quenching step, eliminating the need for in-between purification. The protocol is optimized using γ-aminobutyric acid (GABA) as initial amino acid, and the unique ability of the resulting oligomers to depolymerize, with the formation of cyclic γ-butyrolactame, is evidenced. Furthermore, in order to demonstrate the versatility of the present protocol, a library of 17 unnatural amino acid monomers is synthesized, starting from the readily available GABA-derivative 4-amino-2-hydroxybutanoic acid, and then used to create multifunctional tetramers. Notably, the obtained tetramers show higher thermal stability than a similar thiolactone-based sequence-defined macromolecule, which enables its exploration within a material context. To that end, a bidirectional growth approach is proposed as a greener alternative that reduces the number of synthetic steps to obtain telechelic sequence-defined oligoamides. The latter are finally used as macromers for the preparation of polymer networks. We expect this strategy to pave the way for the further exploration of sequence-defined macromolecules in material science.
RESUMEN
Antibody-recruiting molecules represent a novel class of therapeutic agents that mediate the recruitment of endogenous antibodies to target cells, leading to their elimination by the immune system. Compared to single-ligand copies, macromolecular scaffolds presenting multiple copies of an antibody-binding ligand offer advantages in terms of increased complex avidity. In this study, we describe the synthesis of sequence-defined macromolecules designed for antibody recruitment, utilising dinitrophenol (DNP) as a model antibody-recruiting motif. The use of discrete macromolecules gives access to varying the spacing between DNP motifs while maintaining the same chain length. This characteristic enables the investigation of structure-dependent binding interactions with anti-DNP antibodies. Through solid-phase thiolactone chemistry, we synthesised a series of oligomers with precisely localised DNP motifs along the backbone and a terminal biotin motif for surface immobilisation. Utilising biolayer interferometry analysis, we observed that oligomers with adjacent DNP motifs exhibited enhanced avidity for anti-DNP antibodies. Molecular modelling provided insights into the structures and dynamics of the various macromolecules, shedding light on the accessibility of the ligands to the antibodies. Overall, our findings highlight that the use of sequence-defined macromolecules can contribute to our understanding of structure-activity relationships and provide insights for the design of novel antibody-recruiting therapeutic agents.
RESUMEN
The storage of information in synthetic (macro)molecules provides an attractive alternative for current archival storage media, and the advancements made within this area have prompted the investigation of such molecules for numerous other applications (e.g., anti-counterfeiting tags, steganography). While different strategies have been described for storing information at the molecular level, this Perspective aims to provide a critical overview of the most prominent approaches that can be utilized for retrieving the encoded information. The major part will focus on the sequence determination of synthetic macromolecules, wherein information is stored by the precise arrangement of constituting monomers, with an emphasis on chemically aided strategies, (tandem) mass spectrometry, and nanopore sensing. In addition, recent progress in utilizing (mixtures of) small molecules for information storage will be discussed. Finally, the closing remarks aim to highlight which strategy we believe is the most suitable for a series of specific applications, and will also touch upon the future research avenues that can be pursued for reading (macro)molecular information.
Asunto(s)
Nanoporos , Lectura , Sustancias Macromoleculares , Espectrometría de Masas en Tándem , Almacenamiento y Recuperación de la InformaciónRESUMEN
The synthesis of sequence-defined, discrete star-shaped macromolecules is a major challenge due to the lack of straightforward and versatile approaches. Here, a robust strategy is proposed that allows not only the preparation of sequence-defined mikto-arm star-shaped macromolecules but also the synthesis of a series of unprecedented discrete, multifunctional complex architectures with molar masses above 11 kDa. The iterative approach reported makes use of readily available building blocks and results in asymmetrically branched macromolecules with high purity and yields, which is showcased with monodisperse mikto-arm three-, four-, and five-arm star-shaped structures that were all characterized via LC-MS, MALDI-ToF, and NMR. This effective strategy drastically improves upon synthetic abilities of polymer chemists by enabling simultaneously sequence definition, precision insertion of branching points, as well as the orthogonal end-group functionalization of complex polymeric architectures. The presented approach, which can be translated to different platforms such as peptides and peptoids, is therefore particularly interesting in biomedical applications for which multiple different functional moieties on a single discrete macromolecule are needed.
Asunto(s)
Peptoides , Polímeros , Sustancias Macromoleculares/química , Espectrometría de Masas , Péptidos , Polímeros/químicaRESUMEN
In the last decade, the field of sequence-defined polymers and related ultraprecise, monodisperse synthetic macromolecules has grown exponentially. In the early stage, mainly articles or reviews dedicated to the development of synthetic routes toward their preparation have been published. Nowadays, those synthetic methodologies, combined with the elucidation of the structure-property relationships, allow envisioning many promising applications. Consequently, in the past 3 years, application-oriented papers based on discrete synthetic macromolecules emerged. Hence, material science applications such as macromolecular data storage and encryption, self-assembly of discrete structures and foldamers have been the object of many fascinating studies. Moreover, in the area of life sciences, such structures have also been the focus of numerous research studies. Here, it is aimed to highlight these recent applications and to give the reader a critical overview of the future trends in this area of research.
RESUMEN
Sequence-encoded oligo(thioether urethane)s with two different coding monomers per backbone unit were prepared via a solid phase, two-step iterative protocol based on thiolactone chemistry. The first step of the synthetic cycle consists of the thiolactone ring opening with a primary amine, whereby the in situ released thiol is immediately reacted with an epoxide. In the second step, the thiolactone group is reinstalled to initiate the next cycle. This strategy allows to introduce two different coding monomers per synthetic cycle, rendering the resulting macromolecules especially attractive in the area of (macro)molecular data storage because of their increased data storage capacity. Subsequently, the efficiency of the herein reported synthesis route and the applicability of the dual-encoded sequence-defined macromolecules as a potential data storage platform have been demonstrated by unraveling the exact monomer order using tandem mass spectrometry techniques.
Asunto(s)
Compuestos de Sulfhidrilo , Uretano , Compuestos Epoxi , Resinas Epoxi , Almacenamiento y Recuperación de la Información , Sustancias Macromoleculares/química , Compuestos de Sulfhidrilo/química , Uretano/químicaRESUMEN
Dynamic sequence-defined oligomers carrying a chemically written pin code are obtained through a strategy combining multicomponent reactions with the thermoreversible addition of 1,2,4-triazoline-3,5-diones (TADs) to indole substrates. The precision oligomers are specifically designed to be encrypted upon heating as a result of the random reshuffling of the TAD-indole covalent bonds within the backbone, thereby resulting in the scrambling of the encoded information. The encrypted pin code can eventually be decrypted following a second heating step that enables the macromolecular pin code to be deciphered using 1D electrospray ionization-mass spectrometry (ESI-MS). The herein introduced concept of encryption/decryption represents a key advancement compared with current strategies that typically use uncontrolled degradation to erase and tandem mass spectrometry (MS/MS) to analyze, decipher, and read-out chemically encrypted information. Additionally, the synthesized macromolecules are coated onto a high-value polymer material, which demonstrates their potential application as coded product tags for anti-counterfeiting purposes.
RESUMEN
An automated, iterative protocol for the synthesis of multifunctional, sequence-defined oligo-urethane-amides using thiolactone chemistry is reported. Here, sequenced functionalization of the backbone is easily introduced using commercially available primary amines. The chemistry is carried out on solid phase using different supports for better optimization of the synthetic protocol and in order to demonstrate the versatility of the approach. This technique is very effective for iterative synthesis and solid-phase chemistry and enables the exploration of full automation of this approach using a robotic peptide synthesizer. As a result, this automated protocol allows for the synthesis of a sequence-defined nonamer of high purity.
Asunto(s)
Amidas/síntesis química , Automatización , Lactonas/química , Compuestos de Sulfhidrilo/química , Uretano/síntesis química , Amidas/química , Estructura Molecular , Uretano/químicaRESUMEN
Multivalent glycomaterials show high affinity toward lectins but are often nonselective as they lack the precise 3-D presentation found in native glycans. Here, thiolactone chemistry is exploited to enable the synthesis of glycopolymers with both a primary binding (galactose) and a variable secondary binding unit in close proximity to each other on the linker. These polymers are used to target the Cholera toxin B subunit, CTxB, inspired by its native branched glycan target, GM-1. The secondary, nonbinding unit was shown to dramatically modulate affinity and selectivity toward the Cholera toxin. These increasingly complex glycopolymers, assembled using accessible chemistry, can help breach the synthetic/biological divide to obtain future glycomimetics.
RESUMEN
Polyampholytes with precisely alternating cationic and anionic functional groups were prepared using sustainable thiolactone building blocks in a simple one-pot procedure at room temperature and in water. Ring opening of the N-maleamic acid-functionalized homocysteine thiolactone monomer enabled the introduction of different functional groups into the polymer chain, which contributed to both ionic and hydrogen bonding interactions. The resulting polyampholytes exhibited various isoelectric points while maintaining high solubility in water under different pH and ionic strengths, which expands their potential applications. Finally, it is shown that the upper critical solution temperature (UCST) of these alternating polyampholytes in water/ethanol (30/70% vol) solutions can be tuned as a function of the content of ionic and hydroxyl groups.
RESUMEN
Copolymers containing water-soluble poly(ethylene glycol) (PEG) side chains and precisely controlled functional microstructures were synthesized by sequence-controlled copolymerization of donor and acceptor comonomers, that is, styrene derivatives and N-substituted maleimides. Two routes were compared for the preparation of these structures: a)â the direct use of a PEG-styrene macromonomer as a donor comonomer, and b)â the use of an alkyne-functionalized styrenic comonomer, which was PEGylated by copper-catalyzed alkyne-azide cycloaddition after polymerization. The latter method was found to be the most versatile and enabled the synthesis of high-precision copolymers. For example, PEGylated copolymers containing precisely positioned fluorescent (e.g. pyrene), switchable (e.g. azobenzene), and reactive functionalities (e.g. an activated ester) were prepared.
RESUMEN
Star polymers based on ß-cyclodextrin were synthesized by a ''click-chemistry'' process and characterized by NMR, SEC and BLM. The resulting triazole functional groups create, at a specific pH range, electrostatic hindrance between pores inserted in lipid bilayers, preventing their aggregation, allowing formation of well-defined isolated unitary pores and mimicking biological natural channels.
Asunto(s)
Materiales Biomiméticos/química , Canales Iónicos/química , Triazoles/química , beta-Ciclodextrinas/química , Biomimética , Química Clic , Membrana Dobles de Lípidos/química , Electricidad EstáticaRESUMEN
Anionic polymerization initiated by cyclodextrins suffers from a poor solubility of those derivatives in standard polymerization solvents. The possibility to perform ethylene oxide polymerization initiated by monofunctional initiators (allyl alcohol, 2-methoxyethanol) by living ring opening polymerization in DMF, a good solvent for any CD derivative, was demonstrated by SEC, (1)H and (13)C NMR analyses. The study was extended to the use of native CD as initiator, leading to the synthesis of ill-defined structures, explained by the reactivity scale of the various hydroxyl functions. Two selectively modified CD derivatives are then used to synthesize a new family of star-shaped poly(ethylene oxide) polymers with CD core, having 14 or 21 arms. The polymerization was found to be living and DOSY experiments confirmed the well-defined structures for the synthesized star-polymers.
Asunto(s)
Dimetilformamida/química , Óxido de Etileno/química , Polietilenglicoles/síntesis química , Solventes/química , beta-Ciclodextrinas/química , Conformación de Carbohidratos , Catálisis , Cinética , Luz , Espectroscopía de Resonancia Magnética , Polietilenglicoles/química , Polimerizacion , Dispersión de Radiación , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Well-defined cleavable or non-cleavable soluble polystyrene supports were prepared by atom transfer radical polymerization and utilized for the iterative synthesis of functional hexapeptides. This approach allowed rapid and efficient liquid phase synthesis of peptide-polymer conjugates.
Asunto(s)
Oligopéptidos/química , Polímeros/química , Secuencia de Aminoácidos , Polimerizacion , Poliestirenos/químicaRESUMEN
Fundamental polymer science is undergoing a profound transformation. As a result of recent progress in macromolecular chemistry and physics, synthetic polymer chains are becoming much more than just the modest building blocks of traditional 'plastics'. Promising options for controlling the primary and secondary structures of synthetic polymers have been proposed and, therefore, similarly to biopolymers, synthetic macromolecules may now be exploited as discrete objects with carefully engineered structures and functions. Although it is not possible today to reach the high level of complexity found in biomaterials, these new chemical possibilities open interesting avenues for applications in microelectronics, photovoltaics, catalysis and biotechnology. Here, we describe in detail these recent advances in macromolecular science and emphasize the possible emergence of technologies based on single-chain devices.
Asunto(s)
Sustancias Macromoleculares/química , Polímeros/químicaRESUMEN
Homopolymers of N-acryloyl glycinamide were prepared by reversible addition-fragmentation chain transfer polymerization in water. The formed macromolecules exhibit strong polymer-polymer interactions in aqueous milieu and therefore form thermoreversible physical hydrogels in pure water, physiological buffer or cell medium.
Asunto(s)
Glicina/análogos & derivados , Hidrogeles/química , Polímeros/síntesis química , Agua/química , Glicina/química , Estructura Molecular , Polímeros/química , TemperaturaRESUMEN
Monodisperse sequence-defined oligomers have been synthesized in solution in the absence of protecting groups. These structures have been prepared stepwise using two consecutive chemoselective reactions: 1,3-dipolar cycloaddition of terminal alkynes and azides and amidification of carboxylic acids with primary amines. These oligomers were efficiently constructed on either a conventional solid support (commercial Wang resin) or tailor-made soluble polystyrene supports synthesized by atom-transfer radical polymerization. The latter approach was found to be very versatile. Indeed, well-defined soluble macromolecular supports allowed not only the synthesis and cleavage of defined oligomers (i.e., sacrificial support) but also the preparation of noncleavable block copolymers containing sequence-defined segments.
Asunto(s)
Alquinos/química , Aminas/química , Azidas/química , Ácidos Carboxílicos/química , Polímeros/síntesis química , Ciclización , Estructura Molecular , Polímeros/química , Poliestirenos/química , Soluciones/síntesis química , Soluciones/químicaRESUMEN
Novel biocompatible thermogels have been synthesized and characterized. The hydrogelators were synthesized by atom transfer radical copolymerization of 2-(2-methoxyethoxy)ethyl methacrylate (MEO(2)MA) and oligo(ethylene glycol) methyl ether methacrylate (OEGMA(475), M(n)=475 g mol(-1) or OEGMA(300), M(n)=300 g mol(-1)) in the presence of a 4-arm star poly(ethylene glycol) (PEG) macroinitiator. The formed macromolecules possess a permanently hydrophilic PEG core and thermoresponsive P(MEO(2)MA-co-OEGMA) outer-blocks. These star-block architectures exhibit an inverse thermogelation behavior in aqueous medium. Typically, above their lower critical solution temperature (LCST), the thermoresponsive P(MEO(2)MA-co-OEGMA) precipitate, thus forming physical crosslinks, which are stabilized in water by hydrophilic PEG bridges. This thermo-induced sol-gel transition can be adjusted within a near-physiological range of temperature by simply varying the composition of the thermoresponsive segments. Moreover, these novel hydrogelators formed free-standing gels in various buffer solutions (e.g., PBS, Tris, MOPS, bicine and HEPES) and in cell culture media. In saline solutions, a weak salting-out effect was observed. However, other components of physiological media (e.g., buffering agents, amino acids, vitamins, proteins) did not hinder the thermogelation process. Hence, these novel thermogels appear as highly attractive candidates for applications in biosciences.
Asunto(s)
Medios de Cultivo , Geles/química , Polietilenglicoles/química , Materiales Biocompatibles , Tampones (Química) , Cromatografía en Gel , Diseño de Fármacos , Electroquímica , Espectroscopía de Resonancia Magnética , Solubilidad , Termodinámica , ViscosidadRESUMEN
The control over comonomer sequences is barely studied in macromolecular science nowadays. This is an astonishing situation, taking into account that sequence-defined polymers such as nucleic acids and proteins are key components of the living world. In fact, fascinating biological machines such as enzymes, transport proteins, cytochromes or sensory receptors would certainly not exist if evolution had not favored chemical pathways for controlling chirality and sequences. Thus, it seems obvious that synthetic polymers with controlled monomer sequences have an enormous role to play in the materials science of the next centuries. The goal of this tutorial review is to shed light on this highly important but embryonic field of research. Both biological and synthetic mechanisms for controlling sequences in polymerization processes are critically discussed herein. This state-of-the-art overview may serve as a source of inspiration for the development of new generations of synthetic macromolecules.