Synthesis and toxicological study of chitosan-pirul (Schinus molle L.) essential oil nanoparticles on Aspergillus flavus.

In recent years, the study of essential oils as antifungal alternatives and their encapsulation to increase their properties for greater effects has been tested. In this work, nanoparticles of chitosan-Schinus molle L. essential oil (CS-PEO-Np) with a size of 260 ± 31.1 nm were obtained by ionic gelation and evaluated in some growth phases of Aspergillus flavus, a toxigenic fungus. At a concentration of 250 µg/mL of CS-PEO-Np, the A. flavus mycelial growth was inhibited at 97.1% with respect to control, at 96 h of incubation; the germination and viability of spores were inhibited at 74.8 and 40%, respectively, after exposure to 500 µg/mL of these nanomaterials, at 12 h of incubation. The fluorescence images of stained spores with DAPI showed the affectations caused by nanoparticles in the cell membrane, vacuoles and vacuolar content, cell wall, and nucleic acids. For both nanoparticles, CS-Np and CS-PEO-Np, no mutagenic effect was observed in Salmonella Typhimurium; also, the phytotoxic assay showed low-to-moderate toxicity toward seeds, which was dependent on the nanoparticle's concentration. The acute toxicity of CS-PEO-Np to A. salina nauplii was considered low in comparison to CS-Np (control), which indicates that the incorporation of Schinus molle essential oil into nanoparticles of chitosan is a strategy to reduce the toxicity commonly associated with nanostructured materials. The nanoparticulated systems of CS-PEO-Np represent an effective and non-toxic alternative for the control of toxigenic fungi such as A. flavus by delaying the initial growth stage.

Preparation and Characterization of Poly(lactic acid) Membranes and Films Coated with Polyaniline for Potential Use in Environmental Remediation.

This research outlines the fabrication of polymeric membranes and films of poly(lactic acid) (PLA), prepared via electrospinning and extrusion, respectively. These materials were subsequently coated with polyaniline (PANi) by using the in situ chemical polymerization technique. Scanning electron microscopy micrographs revealed that the best coatings were achieved when 3 and 30 min of contact time with the monomeric solution were used for the membrane and film, respectively. Additionally, Fourier transform infrared spectra, thermogravimetric studies, and contact angle measurements demonstrated proper interaction between PLA and PANi. The findings of these studies suggest that PLA membranes and films can serve as suitable substrates for the deposition of PANi, and the composite materials hold potential for use in environmental remediation applications.

Effect of a Prolonged-Release System of Urea on Nitrogen Losses and Microbial Population Changes in Two Types of Agricultural Soil.

Urea is the nitrogen-containing fertilizer most used in agricultural fields; however, the nutrient given by the urea is lost into the environment. The aim of this research was to determine the effect of two soil textures by applying a prolonged-release system of urea (PRSU) on the N losses. This research shows an important decrease of the nitrate and ammonium losses from 24.91 to 87.94%. Also, the microbiological population increases after the application of the PRSU. It was concluded that both soil textures presented the same loss-reduction pattern, where the N from the nitrates and ammonium was reduced in the leachates, increasing the quality of the soil and the microbial population in both soil textures after the PRSU application.

Active and Intelligent Packaging: A Review of the Possible Application of Cyclodextrins in Food Storage and Safety Indicators.

Natural cyclodextrins (CDs) can be formed by 6, 7, or 8 glucose molecules (α-, ß-, and γ-, respectively) linked in a ring, creating a cone shape. Its interior has an affinity for hydrophobic molecules, while the exterior is hydrophilic and can interact with water molecules. This feature has been used to develop active packaging applied to food, interacting with the product or its environment to improve one or more aspects of its quality or safety. It also provides monitoring information when food is optimal for consumption, as intelligent packaging is essential for the consumer and the merchant. Therefore, this review will focus on discerning which packaging is most appropriate for each situation, solubility and toxicological considerations, characterization techniques, effect on the guest properties, and other aspects related to forming the inclusion complex with bioactive molecules applied to packaging.

Nanoparticles of Betalain-Gelatin with Antioxidant Properties by Coaxial Electrospraying: Preparation and Characterization.

Betalains are bioactive compounds with attractive antioxidant properties for the food industry, endowing them with potential application in food coatings to maintain quality and extend shelf life. However, they have low stability to factors such as light, temperature, and humidity. An alternative to protect bioactive compounds is nanoencapsulation; one of the most used techniques to produce an encapsulation is coaxial electrospraying. In this research, the preparation and characterization of gelatin-betalain nanoparticles were carried out using the coaxial electrospray technique. Betalains were extracted from pitaya (Stenocereus thurberi) and encapsulated in gelatin. The obtained material was evaluated by SEM, FTIR, TGA, and DSC techniques and for its antioxidant capacity. By SEM, nanoparticles with spherical and monodisperse morphologies were observed, with betalain concentrations of 1 and 3% w/v and average diameters of 864 and 832 µm, respectively. By FTIR, the interaction between betalain and gelatin was observed through amino groups and hydrogen bonds. Likewise, the antioxidant activity of the betalains was maintained at the time of encapsulation, increasing the antioxidant activity as the concentration increased. The results of the DPPH, ABTS, and total phenols methods were 645.4592 µM T/g, 832.8863 ± 0.0110 µM T/g, and 59.8642 ± 0.0279 mg GAE/g for coaxial nanoparticles with 3% betalains, respectively. Therefore, the coaxial electrospray technique was useful for obtaining nanoparticles with good antioxidant properties, and due to the origin of its components and since the use of toxic solvents is not necessary in the technique, the material obtained can be considered food grade with potential application as a coating on functional foods.

Antioxidant and Antimicrobial Effect of Biodegradable Films Containing Pitaya (Stenocereus thurberi) Extracts during the Refrigerated Storage of Fish.

This study focused on the quality loss inhibition of fish muscle during refrigerated storage. Two parallel experiments were carried out that were focused on the employment of pitaya (Stenocereus thurberi) extracts in biodegradable packing films. On the one hand, a pitaya-gelatin film was employed for hake (Merluccius merluccius) muscle storage. On the other hand, a pitaya-polylactic acid (PLA) film was used for Atlantic mackerel (Scomber scombrus) muscle storage. In both experiments, fish-packing systems were stored at 4 °C for 8 days. Quality loss was determined by lipid damage and microbial activity development. The presence of the pitaya extract led to an inhibitory effect (p < 0.05) on peroxide, fluorescent compound, and free fatty acid (FFA) values in the gelatin-hake system and to a lower (p < 0.05) formation of thiobarbituric acid reactive substances, fluorescent compounds, and FFAs in the PLA-mackerel system. Additionally, the inclusion of pitaya extracts in the packing films slowed down (p < 0.05) the growth of aerobes, anaerobes, psychrotrophs, and proteolytic bacteria in the case of the pitaya-gelatin films and of aerobes, anaerobes, and proteolytic bacteria in the case of pitaya-PLA films. The current preservative effects are explained on the basis of the preservative compound presence (betalains and phenolic compounds) in the pitaya extracts.

Effect of Ionic Liquids in the Elaboration of Nanofibers of Cellulose Bagasse from Agave tequilana Weber var. azul by Electrospinning Technique.

The objective of this paper was to report the effect of ionic liquids (ILs) in the elaboration of nanofibers of cellulose bagasse from Agave tequilana Weber var. azul by the electrospinning method. The ILs used were 1-butyl-3-methylimidazolium chloride (BMIMCl), and DMSO was added as co-solvent. To observe the effect of ILs, this solvent was compared with the organic solvent TriFluorAcetic acid (TFA). The nanofibers were characterized by transmission electron microscopy (TEM), X-ray, Fourier transform-infrared using attenuated total reflection (FTIR-ATR) spectroscopy, and thermogravimetric analysis (TGA). TEM showed different diameters (ranging from 35 to 76 nm) of cellulose nanofibers with ILs (CN ILs). According to X-ray diffraction, a notable decrease of the crystalline structure of cellulose treated with ILs was observed, while FTIR-ATR showed two bands that exhibit the physical interaction between cellulose nanofibers and ILs. TGA revealed that CN ILs exhibit enhanced thermal properties due to low or null cellulose crystallinity. CN ILs showed better characteristics in all analyses than nanofibers elaborated with TFA organic solvent. Therefore, CN ILs provide new alternatives for cellulose bagasse. Due to their small particle size, CN ILs could have several applications, including in food, pharmaceutical, textile, and material areas, among others.

Nanoencapsulation of Eggplant (Solanum melongena L.) Peel Extract in Electrospun Gelatin Nanofiber: Preparation, Characterization, and In Vitro Release.

This study describes the preparation and characterization of eggplant peel extract-loaded electrospun gelatin nanofiber and study of its in vitro release. Results obtained by scanning electron microscopy (SEM) and transmission electronic microscopy (TEM) micrograph revealed that eggplant peel extract-loaded electrospun gelatin nanofiber is in nanometric range with an average diameter 606.7 ± 184.5 and 643.6 ± 186.7 nm for 20 and 33.3 mg mL-1 of extract addition, respectively. Moreover, the incorporation of extract improved morphology by being smooth, homogeneous, and without account formation compared to nanofibers without extract (control). Fourier transform-infrared (FT-IR) spectra indicated that interaction exists between electrospun gelatin nanofiber and eggplant peel extract by hydrogen bond interactions, mainly. Electrospun gelatin nanofibers showed encapsulation efficiency greater than 90% of extract and a maximum release of 95 and 80% for the medium at pH 1.5 and 7.5, respectively. Therefore, the electrospinning technique is a good alternative for the conservation of bioactive compounds present in the eggplant peel through electrospun gelatin nanofiber.

Combination of Sorbitol and Glycerol, as Plasticizers, and Oxidized Starch Improves the Physicochemical Characteristics of Films for Food Preservation.

The aim of this work was to use glycerol (Gly) and sorbitol (Sor) as plasticizers with oxidized starch potato (OS) to produce biodegradable and environmentally friendly films, and to demonstrate the resulting physicochemical and functional viability without subtracting the organoleptic characteristics of the food. Analyses by water vapor permeability (WVP), attenuated total reflection Fourier transform infrared spectra (ATR-FTIR), scanning electron microscopy (SEM), tensile strength (TS), and transparency (UV) showed that the best film result was with 1.5 g of Gly and 2.0 g of Sor, conferred shine, elasticity 19.42 ± 6.20%, and mechanical support. The starch oxidized to 2.5%, contributing a greater transparency of 0.33 ± 0.12 and solubility of 78.90 ± 0.94%, as well as less permeability to water vapor 6.22 ± 0.38 gmm-2 d-1 kPa-1. The films obtained provide an alternative for use in food due to their organic compounds, excellent visual presentation, and barrier characteristics that maintain their integrity and, therefore, their functionality.

Sustainable-green synthesis of silver nanoparticles using safflower (Carthamus tinctorius L.) waste extract and its antibacterial activity.

Silver nanoparticles have high potential for application in food industry, as they have the ability to inhibit a wide range of bacteria of pathogenic and spoilage origin. They can be obtained from different methods classified in physical and chemical and which are aggressive with the environment since they produce toxic waste. Nowadays, environmentally friendly methods such as green synthesis can be used, through the use of agri-food waste. The use of these wastes is a more sustainable method, because it reduces the environmental pollution, at the same time that silver nanoparticles are obtained. The aim of the present study is the green synthesis of silver nanoparticles using safflower (Carthamus tinctorius L.) aqueous extract from waste and its antibacterial activity on Staphylococcus aureus (Gram positive) and Pseudomonas fluorescens (Gram negative). The analyses by TEM showed that the as-synthesized silver nanoparticles were uniform and spherical particles with an average diameter of 8.67 ± 4.7 nm and confirmed by SEM. The electron diffraction and TEM analyses showed the characteristic crystallinity of silver nanoparticles. FTIR spectroscopy confirmed that various functional groups were responsible for reducing and stabilizing during the biosynthesis process. Nanoparticles inhibited the growth of both types of bacteria from the lowest concentration evaluated (0.9 µg/mL). We conclude that silver nanoparticles synthesized in the present study have potential application as antibacterial agents in food and medicine industry.

A new design for obtaining of white zein micro- and nanoparticles powder: antisolvent-dialysis method.

The objective of this work was propose antisolvent-dialysis as a new, easy, one-step and reproducible method for obtaining white zein micro- and nanoparticles powder. Firstly, the study by SEM of white zein powder predicted micro- and nanoparticles with spherical morphology and average diameters of 243.2 ± 94.5 nm for nanoparticles and 0.74 ± 0.2 µm for microparticles. UV-Vis predicted lower absorbance of 250-500 nm for white zein powder compared to commercial yellow zein powder. FT-IR showed shifting of the main bands to the right, due to changes in particle-shaped microstructure that acquires white zein powder compared to yellow zein powder. In TGA white zein powder showed a decomposition range from 214 to 400 °C, while yellow zein powder from 240 to 400 °C. Therefore, antisolvent-dialysis is new method to obtain white zein micro- and nanoparticles with potential applications such as polymer matrix and white natural coloring.

Biosorption of copper by immobilized biomass of Aspergillus australensis. Effect of metal on the viability, cellular components, polyhydroxyalkanoates production, and oxidative stress.

Heavy metals are toxic especially when they are introduced into the environment due to anthropogenic activities such as metallurgy, mining, and tanning. Removing these pollutants has become a worldwide concern since they cannot be degraded into nontoxic forms causing extended effects in the ecosystems. The use of an Aspergillus australensis was evaluated in order to remove Cu2+ from simulated wastewater. The fungus was isolated from river sludges contaminated with heavy metals and was first evaluated for the determination of Cu2+ tolerance levels. Microscopic fluorescence analysis was carried out to determine the effect of Cu2+ presence on the viability, cellular components, polyhydroxyalkanoates production, and oxidative stress of the fungus, as a response to the stress caused by exposure to metal. In order to achieve copper removal, the A. australensis biomass was produced using batch cultures, and the mycelium was immobilized on a textile media in order to compare the copper-removal efficiency of live or dead biomass. The optimal values of pH and temperature for biomass production were established by using a surface response analysis. Live immobilized biomass was capable of removing Cu2+ from 1.54 ± 0.19 to 2.66 ± 0.26 mg of copper/ g of dry biomass, while values of 1.93 ± 0.03 to 2.36 ± 0.29 mg of copper/g of dry biomass were observed when dead biomass was used. As was expected, copper removal using biomass varied depending on the pH and temperature used.

Effect of Ultrafiltration of Pitaya Extract (Stenocereus thurberi) on Its Phytochemical Content, Antioxidant Capacity, and UPLC-DAD-MS Profile.

Stenocereus thurberi is an endemic species in northwestern Mexico. It produces colorful fruits called pitayas that have an edible pulp. They have phytochemical compounds associated with biological activities. Ultrafiltration is a widely used method for the clarification of fruit juices and the recovery of phytochemicals. However, its effect has not been extensively studied in extracts. Therefore, the objective of this work is to study the effect of the ultrafiltration of pitaya extract (Stenocereus thurberi) on its phytochemical content, antioxidant capacity, and identification of phenolic compounds by UPLC-DAD-MS, providing greater knowledge about the pitaya. In this study, two extracts were analyzed, the unclarified extract (UE) and the clarified extract (CE). The antioxidant capacity was higher in the CE with 15.93 ± 0.42 mM TE/g, DPPH and 18.37 ± 0.016 mM TE/g, ABTS. The UPLC-MS analysis indicated the decrease in phenolic compounds in the CE and the presence of gallic acid and resorcinol, compounds that had not been identified in other species of Stenocereus spp. The correlation analysis indicated that all the phytochemicals present in the pitaya contribute significantly to the antioxidant capacity. The ultrafiltration process could be a viable option to improve the biological activity of the natural extracts.

Preparation and Characterization of Quercetin-Loaded Zein Nanoparticles by Electrospraying and Study of In Vitro Bioavailability.

Quercetin is a hydrophobic flavonoid with high antioxidant activity. However, for biological applications, the bioavailability of quercetin is low due to physiological barriers. For this reason, an alternative is the protection of quercetin in matrices of biopolymers as zein. The objective of this work was to prepare and characterize quercetin-loaded zein nanoparticles by electrospraying and its study of in vitro bioavailability. The physicochemical parameters such as viscosity, density, and electrical conductivity of zein solutions showed a dependence of the ethanol concentration. In addition, rheological parameters demonstrated that solutions of zein in aqueous ethanol present Newtonian behavior, rebounding in the formation of nanoparticles by electrospraying, providing spherical, homogeneous, and compact morphologies, mainly at a concentration of 80% (v/v) of ethanol and of 5% (w/v) of zein. The size and shape of quercetin-loaded zein nanoparticles were studied by transmission electron microscopy (TEM), observing that it was entrapped, distributed throughout the nanoparticle of zein. Analysis by Fourier transform-infrared (FT-IR) of zein nanoparticles loaded with quercetin revealed interactions via hydrogen bonds. The efficacy of zein nanoparticles to entrap quercetin was particularly high for all quercetin concentration evaluated in this work (87.9 ± 1.5% to 93.0 ± 2.6%). The in vitro gastrointestinal release of trapped quercetin after 240 min was 79.1%, while that for free quercetin was 99.2%. The in vitro bioavailability was higher for trapped quercetin (5.9%) compared to free quercetin (1.9%), than of gastrointestinal digestion. It is concluded, that the electrospraying technique made possible the obtention of quercitin-loaded zein nanoparticles increasing their bioavailability. PRACTICAL APPLICATION: This type of nanosystems can be used in the food and pharmaceutical industry. Quercetin-loaded zein nanoparticles for its improvement compared to free quercetin can be used to decrease the prevalence of chronic degenerative diseases by increasing of the bioavailability of quercetin in the bloodstream. Other application can be as an antioxidant system in functional foods or oils to increase shelf life.

Toxicological Assessment of Cross-Linked Beads of Chitosan-Alginate and Aspergillus australensis Biomass, with Efficiency as Biosorbent for Copper Removal.

Sorbent materials of biological origin are considered as an alternative to the use of traditional methods in order to remove heavy metals. Interest in using these materials has increased over the past years due to their low cost and friendliness to the environment. The objective of this study was to synthesize and characterize cross-linked beads made of chitosan, alginate, and mycelium of a copper-tolerant strain of Aspergillus australensis. The acute toxicity of the biocomposite beads was assessed using brine shrimp Artemia salina nauplii and the phytotoxicity was determined using lettuce (Lactuca sativa) and chili pepper 'Anaheim' (Capsicum annuum) seeds. The biosorption capacity for copper removal in simulated wastewater was also evaluated. Results showed that the biosorbent obtained had a maximal adsorption of 26.1 mg of Cu2+ per g of biocomposite, and removal efficiency was around 79%. The toxicity of simulated residual water after treatment with the biocomposite showed low toxicity toward seeds, which was highly dependent on the residual copper concentration. The toxicity of the biocomposite beads to A. salina was considered medium depending on the amount of the biocomposite, which was attributed to low pH. Biocomposite shows promise as biosorbent for the removal process of heavy metals.

Gallic Acid-Loaded Zein Nanoparticles by Electrospraying Process.

Currently, electrospraying is a novel process for obtaining the nanoparticles from biopolymers. Zein nanoparticles have been obtained by this method and used to protect both hydrophilic and hydrophobic antioxidant molecules from environmental factors. The objective of this work was to prepare and characterize gallic acid-loaded zein nanoparticles obtained by the electrospraying process to provide protection to gallic acid from environmental factors. Thus, it was related to the concentration of gallic acid in physicochemical and rheological properties of the electrosprayed solution, and also to equipment parameters, such as voltage, flow rate, and distance of the collector in morphology, and particle size. The physicochemical properties showed a relationship in the formation of a Taylor cone, in which at a low concentration of gallic acid (1% w/v), low viscosity (0.00464 ± 0.00001 Pa·s), and density (0.886 ± 0.00002 g/cm3 ), as well as high electrical conductivity (369 ± 4.3 µs/cm), forms a stable cone-jet mode. The rheological properties and the Power Law model of the gallic acid-zein electrosprayed solution demonstrated Newtonian behavior (n = 1). The morphology and size of the particle were dependent on the concentration of gallic acid. Electrosprayed parameters with high voltage (15 kV), low flow rate (0.1 mL/hr), and short distance (10 cm) exhibited a smaller diameter and spherical morphology. FT-IR showed interaction in the gallic acid-loaded zein nanoparticle by hydrogen bonds. Therefore, the electrospraying process is a feasible technique for obtaining gallic acid-loaded zein nanoparticles and providing potential protection to gallic acid from environmental factors.

Evaluation of Antioxidant Capacity, Protective Effect on Human Erythrocytes and Phenolic Compound Identification in Two Varieties of Plum Fruit (Spondias spp.) by UPLC-MS.

Plum edible part was used to obtained extracts by during a 4 h maceration process using three different solvents (ethanol, methanol and water) for the determination of total phenols and flavonoids, antioxidant capacity by (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), 2,2-diphenyl-1-picrylhydrazyl (DPPH) and hemolysis inhibition in human blood assays. Subsequently, phenolic compounds were identified using ultra-performance liquid chromatography (UPLC-MS). The results indicated that the ethanolic extract of plum fruit being a good source of phenolic (12⁻18 mg GAE/g FW) and flavonoids (2.3⁻2.5 mg QE/g FW) content in both varieties of plum. Also, the fruits proved a good source of antioxidants as measured by DPPH and ABTS; likewise, plum aqueous extracts showed the highest protective effect on human erythrocytes with 74.34 and 64.62% for yellow and red plum, respectively. A total of 23 bioactive compounds were identified by UPLC-MS, including gallic acid, rutin, resorcinol, chlorogenic acid, catechin, and ellagic acid, and the antioxidant capacity can be attributed to these species. The edible part of plum contains compounds of biological interest, suggesting that this fruit has antioxidant potential that can be exploited for various technologies.

Zein-polysaccharide nanoparticles as matrices for antioxidant compounds: A strategy for prevention of chronic degenerative diseases.

Oxidative Stress (OS) produces the formation of free radicals and other reactive oxygen and nitrogen species that are intimately involved in many diseases, especially Chronic Degenerative Diseases (CDD) such as cancer, diabetes, cardiovascular diseases, and obesity, among others. Thus, reactive compounds need to be quenched by antioxidants. The problems of these compounds include that they are susceptible to degradation, have low bioavailability, and can lose their bioactivity in the gastroIntestinal tract. Therefore, an alternative is encapsulation. Zein is a protein used in nanotechnology as a polymer matrix because it can encapsulate different compounds such as antioxidants to provide stability and control of the release. The disadvantage of zein as a delivery vehicle is that it is limited by the low stability of aggregation when suspended in water, in addition to the conditions of acid pH or that higher ionic strength tends to destabilize. To reduce these limitations, the incorporation of polysaccharides as a second polymer matrix can provide stability in zein nanoparticles. In this review, we discuss OS as a source of CDD, the role of antioxidants in the prevention of these diseases, and the preparation, characterization, and application of antioxidant-zein-polysaccharide particles as delivery systems as well as possible mechanisms to control CDD.

Nanofibers of cellulose bagasse from Agave tequilana Weber var. azul by electrospinning: preparation and characterization.

In this study, cellulose of bagasse from Agave tequilana Weber var. azul was extracted to elaborate nanofibers by the electrospinning technique. Fiber characterization was performed using Transmission Electron Microscopy (TEM), x-ray, Fournier Transform-InfraRed (FT-IR) spectroscopy, and thermal analysis by Differential Scanning Calorimetry-Thermogravimetric Analysis (DSC-TGA). Different diameters (ranging from 54.57 ±â€¯0.02 to 171 ±â€¯0.01 nm) of nanofibers were obtained. Cellulose nanofibers were analyzed by means of x-ray diffraction, where we observed a total loss of crystallinity in comparison with the cellulose, while FT-IR spectroscopy revealed that the hemicellulose and lignin present in the agave bagasse were removed. Thermal analysis showed that nanofibers exhibit enhanced thermal properties, and the zeta potential value (-32.5 mV) demonstrated moderate stability in the sample. In conclusion, the nanofibers obtained provide other alternatives-of-use for this agro-industrial residue and could have potential in various industrial applications, among these encapsulation of bioactive compounds and reinforcing material, to mention a few.

Functionalization of chitosan by a free radical reaction: Characterization, antioxidant and antibacterial potential.

Chitosan was functionalized with epigallocatechin gallate (EGCG) by a free radical-induced grafting procedure, which was carried out by a redox pair (ascorbic acid/hydrogen peroxide) as the radical initiator. The successful preparation of EGCG grafted-chitosan was verified by spectroscopic (UV, FTIR and XPS) and thermal (DSC and TGA) analyses. The degree of grafting of phenolic compounds onto the chitosan was determined by the Folin-Ciocalteu procedure. Additionally, the biological activities (antioxidant and antibacterial) of pure EGCG, blank chitosan and EGCG grafted-chitosan were evaluated. The spectroscopic and thermal results indicate chitosan functionalization with EGCG; the EGCG content was 25.8mg/g of EGCG grafted-chitosan. The antibacterial activity of the EGCG grafted-chitosan was increased compared to pure EGCG or blank chitosan against S. aureus and Pseudomonas sp. (p<0.05). Additionally, EGCG grafted-chitosan showed higher antioxidant activity than blank chitosan. These results indicate that EGCG grafted-chitosan might be useful in active food packaging.