RESUMEN
The biodegradability of poly (3-hydroxybutyrate) (PHB)-based food packaging material PHB/5GS/0.7MgO, developed by incorporating 5 wt% grapeseed oil (GS) and 0.7 wt% MgO nanoparticles using solution casting route, was investigated in soil and river water environments. For comparison, the biodegradability of neat PHB films and PHB-based films loaded only with 5 wt% GS (PHB/5GS) was also studied. Remarkably, all PHB-based films showed 100 % weight loss in soil within 25 days. In contrast, the weight loss of PHB, PHB/5GS, and PHB/5GS/MgO films in river water was 27, 24, and 20 %, respectively, in 120 days. Gradual reduction in average molecular weight and carbonyl index, alongside an increase in crystallinity, opacity, and the number of chain scissions per unit mass, was observed for various PHB-based films during their degradation in soil and river water. Overall, this study demonstrated high degradation efficiency of PHB-based food packaging material in soil than in river water.
Asunto(s)
Biodegradación Ambiental , Hidroxibutiratos , Nanocompuestos , Poliésteres , Ríos , Suelo , Nanocompuestos/química , Poliésteres/química , Poliésteres/metabolismo , Hidroxibutiratos/metabolismo , Hidroxibutiratos/química , Ríos/química , Suelo/química , Cinética , Embalaje de Alimentos/métodos , PolihidroxibutiratosRESUMEN
Minimally processed fruits are increasingly demanded in modern society, but the management of perishable waste pomaces (WPs) and the products' short shelf-life are still big issues. Here, a facile approach of reconstruing apple pomace (AP) into edible bio-nanocomposite coatings of fresh-cutting apple slices was successfully developed through alkaline demethylation followed by high-pressure homogenization. The fibrillation of AP fibers is largely improved by -COO- at a concentration of 1.23 mmol g-1, which is released through alkaline demethylation of pectin, instead of relying on intricated or costly cellulose modifications. The average width of AP nanofibers (AP-NFs) downsizes to 18 nm. By casting, AP-NFs fabricate homogeneous films with comparable transparency (56 % at 600 nm), superior mechanical strength (6.4 GPa of Young modulus and 81.7 MPa of strength) and oxygen barrier properties (79 mL µm m-2 day-1 bar-1), and non-toxicity. Moreover, the AP-NF coatings effectively extend shelf life of apple slices by inhibiting browning and respiration, and retain firmness. This research demonstrates a way to valorize WPs as edible coatings for fruit packaging.
RESUMEN
Food spoilage exacerbates global hunger and poverty, necessitating urgent advancements in food shelf life extension methodologies. However, balancing antibacterial efficacy for food preservation with human and environmental safety remains a significant challenge. Natural essential oils (EOs), known for their potent antibacterial and antioxidant properties, offer eco-friendly alternatives, yet their high volatility and instability limit practical applications. Herein, we conducted the encapsulation of EOs within biocompatible metal phenolic networks (MPNs) to create EOs@MPN nanocapsules. Subsequently, these nanocapsules were integrated into bio-nanocomposite films composed of natural soy protein isolate (SPI) and carboxymethyl cellulose (CMC). The resulting films exhibited robust mechanical properties (Tensile Strength >10 MPa) and significantly enhanced antioxidant activity (7-fold higher than pure films). Importantly, the synergistic combination of EOs and MPNs conferred enhanced antibacterial efficacy. Safety assessments confirmed the bio-nanocomposite films' high biodegradability (> 90 %) and negligible cytotoxicity, ensuring environmental sustainability and human health safety. In practical applications, the bio-nanocomposite films effectively delayed the surface browning of fresh-cut fruits for up to 48 h, demonstrating a pronounced synergistic antioxidative effect against oxidation. Moreover, tomatoes and blueberries packaged with the bio-nanocomposite films still maintained freshness for up to 12 days, offering promising strategies for extending the shelf life of perishable fruits. These findings underscore the potential of EOs@MPN-based bio-nanocomposite films as sustainable solutions for food preservation and highlight their practical viability in mitigating food spoilage and enhancing food security globally.
RESUMEN
Concerned about water treatment, it is of great importance to present new approaches for improving photocatalytic activity. Since photocatalysis is ubiquitous in almost all chemical manufacturing processes, the development of photocatalytic systems carries significance for our environment. In this regard, three different amounts of covalent organic frameworks decorated with titanium(IV) oxide nanoparticles (TiO2/COF hybrids) in Alginate-Carboxymethyl cellulose (Alg-CMC) blend matrix were prepared under ultrasound irradiation, which Citric acid and Calcium chloride acted as two green cross-linkages. Based on the physio-chemical analyses of these bio-nanocomposite (bio-NC) beads, the Alg-CMC blend polymer appeared to be the best candidate for a disparity of TiO2/COF hybrids. Not only did COF aid to increase the distribution of TiO2 nanoparticles, but it declined the bandgap energies. The resultant Alg-CMC/TiO2/COF (TiO2/COF = 15:6) bio-NC beads demonstrated efficient photodegradation activity towards Methyl violet (MV) under Ultraviolet light. The obtained results of scavenger studies indicated that superoxide radicals and electron agents played a major role in MV degradation. Further investigation confirmed that single oxygen addition and N-de-methylation could be two important pathways for the decomposition of MV by these bio-NC beads.
Asunto(s)
Alginatos , Carboximetilcelulosa de Sodio , Violeta de Genciana , Nanocompuestos , Fotólisis , Titanio , Rayos Ultravioleta , Titanio/química , Alginatos/química , Nanocompuestos/química , Carboximetilcelulosa de Sodio/química , Violeta de Genciana/química , Estructuras Metalorgánicas/química , Catálisis , MicroesferasRESUMEN
In the present work, we study different physicochemical properties related to LADME processes of volasertib, a Polo-like kinase 1 inhibitor in advanced clinical trials. Firstly, the protonation equilibria, the extent of ionization at the physiological pH and pKa values of this drug are studied combining spectroscopic techniques and computational calculations. Secondly, the binding process of volasertib to the human serum albumin (HSA) protein is analyzed by fluorescence spectroscopy. We report a high binding constant to HSA (Ka = 4.10 × 106 M-1) and their pharmacokinetic implications are discussed accordingly. The negative enthalpy and entropy (ΔH0 = -54.49 kJ/mol; ΔS0 = -58.90 J K-1 mol-1) determined for the binding process suggests the implication of hydrogen bonds and van der Waals interactions in the formation of the HSA-volasertib complex. Additionally, volasertib is encapsulated in an alginate/montmorillonite bionanocomposite as a proof of concept for an oral delivery nanocarrier. The physical properties of that nanocomposite as well as volasertib delivery kinetics are analyzed.
Asunto(s)
Alginatos , Bentonita , Nanocompuestos , Espectrometría de Fluorescencia , Humanos , Alginatos/química , Bentonita/química , Enlace de Hidrógeno , Concentración de Iones de Hidrógeno , Nanocompuestos/química , Unión Proteica , Pteridinas/química , Albúmina Sérica Humana/química , Albúmina Sérica Humana/metabolismo , TermodinámicaRESUMEN
In this study, a facile approach for simultaneous determination of dopamine (DA) and tryptophan (TRP) using a 3D goethite-spongin-modified carbon paste electrode is reported. The prepared electrode exhibited excellent electrochemical catalytic activity towards DA and TRP oxidation. The electrochemical sensing of the modified electrode was investigated using cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. Through differential pulse voltammetry analysis, two well-separated oxidation peaks were observed at 28 and 77 mV, corresponding to the oxidation of DA and TRP at the working electrode, with a large peak separation of up to 490 mV. DA and TRP were determined both individually and simultaneously in their dualistic mixture. As a result, the anodic peak currents and the concentrations of DA and TRP were found to exhibit linearity within the ranges of 4-246 µM for DA and 2 to 150 µM for TRP. The detection limits (S/N = 3) as low as 1.9 µM and 0.37 µM were achieved for DA and TRP, respectively. The proposed sensor was successfully applied to the simultaneous determination of DA and TRP in human urine samples with satisfactory recoveries (101% to 116%).
RESUMEN
Some of conventional wastewater disinfectants can have a harmful influence on the environment as well as human health. The aim of this investigation was synthesis and characterizes ecofriendly pectin/hydroxyethyl cellulose (HEC)/clay and pectin/HEC/clay incorporated with titanium dioxide nanoparticles (TiO2NPs) and use the prepared bionanocomposite as microbial disinfectants for real wastewater. Pectin/HEC/clay and pectin/HEC/clay/TiO2 bionanocomposite were characterized by various methods including X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Mechanical properties and water vapor permeability (WVP) were carried out. The results of SEM showed that, the prepared bionanocomposite had a smooth surface. Additionally, TiO2 nanoparticles to the pectin/HEC/clay composites may lead to changes in the FTIR spectrum. The intensity of XRD peaks indicated that, TiO2NPs was small size crystallite. TGA illustrated that pectin has moderate thermal stability, while HEC generally exhibits good thermal stability. The TEM showed that, TiO2 nanoparticles have diameters <25 nm. On the other hand, antimicrobial activities of pectin/HEC/clay against Escherichia coli (E. coli), Staphylococcus aureus and Candida albicans have been enhanced by adding TiO2NPs. The minimum inhibitory concentration (MIC) of pectin/HEC/clay/TiO2 against E. coli was 200 mg/mL. Moreover, complete eradication of E. coli, Salmonella and Candida spp. from real wastewater was observed by using pectin/HEC/clay/TiO2 bionanocomposite. Finally, it can be concluded that, the synthesized bionanocomposite is environmentally friendly and considered an excellent disinfectant matter for removal of the microbial pathogens from wastewater to safely reuse.
Asunto(s)
Celulosa , Arcilla , Nanocompuestos , Pectinas , Titanio , Purificación del Agua , Titanio/química , Celulosa/química , Celulosa/análogos & derivados , Nanocompuestos/química , Pectinas/química , Arcilla/química , Purificación del Agua/métodos , Aguas Residuales/química , Aguas Residuales/microbiología , Escherichia coli/efectos de los fármacos , Staphylococcus aureus/efectos de los fármacos , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos X , VaporRESUMEN
The elimination of pesticides from polluted water is critical due to their harmful environmental and biological impacts. Recently, there has been interest in utilizing natural polymer-based adsorbents as an eco-friendly approach to eliminate or reduce the levels of water pollutants. In this work, we synthesized an antimicrobial and magnetic bionanocomposite consisting of carboxymethyl gond katira-grafted- poly(3-aminobenzoic acid) with iron oxide and zinc oxide NPs (CMT-g-P3ABA/ZnO/Fe3O4) through an in situ polymerization reaction and examined for its ability to adsorb the pesticide acetamiprid (AP). The bionanocomposite was characterized using several analytical techniques, including spectroscopy; XRD presented the crystalline structure of ZnO/Fe3O4 in the CMT-g-P3ABA amorphous matrix. The ZnO/Fe3O4 partially aggregated formation and exhibited polyhedral crystal shapes was depicted by electron microscopy images, vibrating sample magnetometer (45.06 emu/g), porosimetry (5.52 m2/g), and thermal (Chair yield of approximately 43.83 %) and elemental analyses. Under various conditions, including solution pH (4-9), adsorbent dosage (0.005-0.025 g), time of contact (10-30 min), and pesticide preliminary concentration (200-400 mg/L) in 10 mL of the solution. Based on this research, Adsorption data were perfectly fitted by the Freundlich isotherm model with RAP2= 0.99038, while the pseudo-second-order (PSO) model well-explained adsorption kinetics with RAP2= 0.99847. AP adsorption to the CMT-g-P3ABA/ZnO/Fe3O4 bionanocomposite was successful due to hydrophobic interactions, hydrogen bonding, and π-π stacking. Furthermore, adsorption-desorption experiments demonstrated that the bionanocomposite could be regenerated after three reuse cycles without considerable loss of pesticide removal performance. The bionanocomposite also exhibited promising antimicrobial activity in contradiction to test bacteria.
Asunto(s)
Antibacterianos , Neonicotinoides , Contaminantes Químicos del Agua , Purificación del Agua , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Adsorción , Purificación del Agua/métodos , Antibacterianos/química , Antibacterianos/farmacología , Neonicotinoides/química , Cinética , Nanocompuestos/química , Óxido de Zinc/químicaRESUMEN
Bionanocomposite films of three biopolymers including chitosan, gelatin, and pectin incorporated with rosemary essential oil (REO) were developed and characterized in terms of their physical, structural, mechanical, morphological, antioxidant, and antimicrobial properties. Incorporation of REO showed an increased hydrophobic nature thus, improved water vapor transmission rate (WVTR), tensile strength (TS), elongation-at-break (EAB), and thermal stability significantly (P ≤ 0.05) as compared to the control films. The addition of REO leads to more opaque films with relatively increased microstructural heterogeneity, resulting in an increase in film opacity. Fourier transform infrared spectroscopy (FTIR) and particle size revealed that REO incorporation exhibits high physicochemical stability in chitosan, gelatin, and pectin bionanocomposite films. Incorporation of REO exhibited the highest inhibitory activity against the tested pathogenic strains (Bacillus subtilis and Escherichia coli). Furthermore, the addition of REO increased the inhibitory activity of films against ABTS and DPPH free radicals. Therefore, chitosan, gelatin, and pectin-based bionanocomposite films containing REO as food packaging could act as a potential barrier to extending food shelf life.
Asunto(s)
Antioxidantes , Quitosano , Embalaje de Alimentos , Gelatina , Nanocompuestos , Aceites Volátiles , Pectinas , Quitosano/química , Pectinas/química , Gelatina/química , Aceites Volátiles/química , Aceites Volátiles/farmacología , Nanocompuestos/química , Antioxidantes/química , Antioxidantes/farmacología , Embalaje de Alimentos/métodos , Resistencia a la Tracción , Vapor , Bacillus subtilis/efectos de los fármacos , Antibacterianos/química , Antibacterianos/farmacología , Escherichia coli/efectos de los fármacos , Antiinfecciosos/química , Antiinfecciosos/farmacología , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Listeria monocytogenes is a concerning foodborne pathogen incriminated in soft cheese and meat-related outbreaks, highlighting the significance of applying alternative techniques to control its growth in food. In the current study, eco-friendly zinc oxide nanoparticles (ZnO-NPs) were synthesized using Rosmarinus officinalis, Punica granatum, and Origanum marjoram extracts individually. The antimicrobial efficacy of the prepared ZnO-NPs against L. monocytogenes was assessed using the agar well diffusion technique. Data indicated that ZnO-NPs prepared using Origanum marjoram were the most effective; therefore, they were used for the preparation of gelatin-based bionanocomposite coatings. Furthermore, the antimicrobial efficacy of the prepared gelatin-based bionanocomposite coatings containing eco-friendly ZnO-NPs was evaluated against L. monocytogenes in Talaga cheese (an Egyptian soft cheese) and camel meat during refrigerated storage at 4 ± 1 oC. Talaga cheese and camel meat were inoculated with L. monocytogenes, then coated with gelatin (G), gelatin with ZnO-NPs 1% (G/ZnO-NPs 1%), and gelatin with ZnO-NPs 2% (G/ZnO-NPs 2%). Microbiological examination showed that the G/ZnO-NPs 2% coating reduced L. monocytogenes count in the coated Talaga cheese and camel meat by 2.76 ± 0.19 and 2.36 ± 0.51 log CFU/g, respectively, by the end of the storage period. Moreover, G/ZnO-NPs coatings controlled pH changes, reduced water losses, and improved the sensory characteristics of Talaga cheese and camel meat, thereby extending their shelf life. The obtained results from this study indicate that the application of gelatin/ZnO-NPs 2% bionanocomposite coating could be used in the food industry to control L. monocytogenes growth, improve quality, and extend the shelf life of Talaga cheese and camel meat.
Asunto(s)
Camelus , Queso , Almacenamiento de Alimentos , Gelatina , Listeria monocytogenes , Nanocompuestos , Óxido de Zinc , Listeria monocytogenes/efectos de los fármacos , Listeria monocytogenes/crecimiento & desarrollo , Óxido de Zinc/farmacología , Óxido de Zinc/química , Queso/microbiología , Gelatina/química , Gelatina/farmacología , Animales , Nanocompuestos/química , Conservación de Alimentos/métodos , Carne/microbiología , Microbiología de Alimentos , Nanopartículas/química , Antibacterianos/farmacología , Antibacterianos/química , Granada (Fruta)/química , Contaminación de Alimentos/prevención & control , Contaminación de Alimentos/análisis , Rosmarinus/química , Refrigeración , Extractos Vegetales/farmacología , Extractos Vegetales/químicaRESUMEN
Chitosan (CS)-based bio-nanocomposite food packaging films were prepared via solvent-casting method by incorporating a unique combination of additives and fillers, including polyvinyl alcohol (PVA), glycerol, Tween 80, castor oil (CO), and nano titanium dioxide (TiO2) in various proportions to enhance film properties. For a comprehensive analysis of the synthesized films, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), tensile testing, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and UV-vis spectrophotometry were employed. Furthermore, the antimicrobial efficacy of the films against S. aureus, E. coli, and A. niger was examined to assess their potential to preserve food from foodborne pathogens. The results claimed that the inclusion of castor oil and TiO2 nanoparticles considerably improved antimicrobial properties, UV-vis light barrier properties, thermal stability, optical transparency, and mechanical strength of the films, while reducing their water solubility, moisture content, water vapor and oxygen permeability. Based on the overall analysis, CS/PVA/CO/TiO2-0.3 film can be selected as the optimal one for practical applications. Furthermore, the practical application of the optimum film was evaluated using white bread as a model food product. The modified film successfully extended the shelf life of bread to 10â¯days, surpassing the performance of commercial LDPE packaging (6â¯days), and showed promising attributes for applications in the food packaging sector. These films exhibit superior antimicrobial properties, improved mechanical strength, and extended shelf life for food products, marking a sustainable and efficient alternative to conventional plastic packaging in both scientific research and industrial applications.
Asunto(s)
Pan , Quitosano , Embalaje de Alimentos , Nanocompuestos , Titanio , Titanio/química , Quitosano/química , Nanocompuestos/química , Embalaje de Alimentos/métodos , Pan/análisis , Nanopartículas/química , Conservación de Alimentos/métodos , Permeabilidad , Termogravimetría , Resistencia a la Tracción , Antibacterianos/química , Antibacterianos/farmacología , Escherichia coli/efectos de los fármacos , Difracción de Rayos XRESUMEN
We conducted a series of experimental investigations to generate laser-stimulated millimeter bubbles (MBs) around silver nanoparticles (AgNPs) and thoroughly examined the mechanism of bubble formation within this nanocomposite system. One crucial aspect we explored was the lifetime and kinetics of these bubbles, given that bubbles generated by plasmonic nanoparticles are known to be transient with short durations. Surprisingly, our findings revealed that the achieved lifetime of these MBs extended beyond seven days. This impressive longevity far surpasses what has been reported in the existing literature. Further analysis of the experimental data uncovered a significant correlation between bubble volume and its lifetime. Smaller bubbles demonstrated longer lifetimes compared to larger ones, which provided valuable insights for future applications. The experimental results not only confirmed the validity of our model and simulations but also highlighted essential characteristics, including extended lifetime, matching absorption coefficients, adherence to physical boundary conditions, and agreement with simulated system parameters. Notably, we generated these MBs around functionalized AgNPs in a biocompatible nanocomposite medium by utilizing low-power light excitation. By readily binding potent cancer drugs to AgNPs through simple physical mixing, these medications can be securely encapsulated within bubbles and precisely guided to targeted locations within the human body. This capability to deliver drugs directly to the tumor site, while minimizing contact with healthy tissues, can lead to improved treatment outcomes and reduced side effects, significantly enhancing the quality of life for cancer patients.
Asunto(s)
Antineoplásicos , Nanopartículas del Metal , Humanos , Calidad de Vida , Plata , Estado de SaludRESUMEN
This study emphasizes the potential of biomass-derived nanoparticles such as nanocellulose (NC), nanohemicellulose (NHC), and nanolignin (NL) as reinforcements in chitosan (C) films to produce a higher barrier active packaging film. The incorporation of NC, NHC, and NL (1.5%) significantly improves the mechanical, water, and UV barrier properties of the chitosan film (P < 0.0001). Additionally, NHC and NL reinforcement significantly enhance antioxidant and antimicrobial activity. The physicochemical, sensory, and microbiological properties of fresh meat packed in chitosan films with 1.5% nanoparticles, as well as a commercial LDPE film, were assessed when stored at 4 °C for up to 18 days. C-NHC and C-NL packaging films preserved the quality of meat until the 18th day, whereas the meat packed in the LDPE film spoiled entirely on the sixth day. In conclusion, chitosan films with biomass-derived nanoparticles could be an excellent packaging material for highly perishable food, such as fresh meat, with an extended shelf life. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05896-9.
RESUMEN
Chronic wounds represent silent epidemic affecting a large portion of the world population, especially the elders; in this context, the development of advanced bioactive dressings is imperative to accelerate wound healing process, while contrasting or preventing infections. The aim of the present work was to provide a deep characterization of the functional and biopharmaceutical properties of a sustainable thin and flexible films, composed of whey proteins alone (WPI) and added with nanostructured zinc oxide (WPZ) and intended for the management of chronic wounds. The potential of whey proteins-based films as wound dressings has been confirmed by their wettability, hydration properties, elastic behavior upon hydration, biodegradation propensity and, when added with nanostructured zinc oxide, antibacterial efficacy against both Gram-positive and Gram-negative pathogens, i.e. Staphylococcus aureus and Escherichia coli. In-vitro experiments, performed on normal human dermal fibroblasts, confirmed film cytocompatibility, also revealing the possible role of Zn2+ ions in promoting fibroblast proliferation. Finally, in-vivo studies on rat model confirmed film suitability to act as wound dressing, since able to ensure a regular healing process while providing effective protection from infections. In particular, both films WPI and WPZ are responsible for the formation in the wound bed of a continuous collagen layer similar to that of healthy skin.
Asunto(s)
Productos Biológicos , Óxido de Zinc , Humanos , Ratas , Animales , Anciano , Óxido de Zinc/farmacología , Proteína de Suero de Leche/farmacología , Antibacterianos/farmacología , ColágenoRESUMEN
The aim of this work is to characterize and evaluate the retention of Cu2+ and Ni2+ from single and binary systems by alginate-Moroccan clay bio-composite with the utilization of calcium chloride as a cross-linking agent, using the ionotropic gelation method. The bio-nanocomposite was characterized by using a variety of techniques (SEM, EDX, XRD, and pHPZC). The efficiency of the adsorbent was investigated under different experimental conditions by varying parameters such as pH, initial concentration, and contact time. To demonstrate the adsorption kinetics, various kinetic models were tried and assessed, including pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models. The research results show that the adsorption process of Cu2+ and Ni2+ metal ions follows a pseudo-second-order kinetic model, and the corresponding rate constants were identified. To evaluate the parameters related to the adsorption process in both single and binary systems, different mathematical models of isotherms, such as Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich, were investigated. The correlation coefficients obtained showed that the most suitable isotherm for describing this adsorption process is the Langmuir model. The process is considered to be physical and endothermic, as suggested by the positive values of ΔH° and ΔS°, indicating increased randomness at the solid/liquid interface during Cu2+ and Ni2+ adsorption. Furthermore, the spontaneity of the process is confirmed by the negative values of ∆G°. The bio-nanocomposite beads demonstrated a maximum adsorption capacity of 370.37 mg/g for Ni2+ and 454.54 mg/g for Cu2+ in the single system. In the binary system, the maximum adsorption capacities were observed to be 357.14 mg/g for Ni2+ and 370.37 mg/g for Cu2+. There is significant evidence for the use of alginate-Moroccan clay bio-nanocomposite as a cost-effective alternative adsorbent for the efficient removal of metal ions in single and binary systems.
RESUMEN
This research investigates the application of an innovative bio-nanocomposite, Fenugreek seed mucilage/silicon carbide (FSM/SiC), as an exceptionally effective adsorbent for eliminating cadmium ions from aqueous solutions. Optimization of fenugreek mucilage extraction involved ultrasonic methods, establishing ideal conditions with a solid-to-solvent ratio of 1:55, 50 °C temperature, 37 kHz frequency, 100 % power, and 30 min processing time. Comprehensive characterization through FTIR spectroscopy, XRD, imaging, DLS, and SEM confirmed the preservation of crucial adsorption-related characteristics. Enhanced adsorption efficiency was achieved by systematically adjusting pH, temperature, adsorbent concentration, pollutant concentration, and contact time, identifying optimal conditions at pH 6, 0.03 g adsorbent dosage, 35 min contact time, and 30 mg/L initial cadmium concentration at 30 °C. Adsorption kinetics followed a pseudo-second-order model, while the Langmuir isotherm fit suggested monolayered adsorption. Thermodynamic analysis indicated exothermic and spontaneous Cd2+ ion adsorption onto FSM/SiC. Remarkably, FSM/SiC demonstrated exceptional regeneration potential, positioning it as a promising solution for water decontamination and environmental remediation. This research showcases FSM/SiC's potential with a maximum adsorption capacity of 41.6 mg/g for cadmium ions, highlighting its significance in addressing cadmium contamination.
Asunto(s)
Nanocompuestos , Extractos Vegetales , Trigonella , Contaminantes Químicos del Agua , Cadmio/química , Termodinámica , Agua/química , Iones , Adsorción , Cinética , Concentración de Iones de Hidrógeno , Contaminantes Químicos del Agua/químicaRESUMEN
A novel and efficient bionanocomposite was synthesized by incorporating SnO into chitosan (Ch) and a room-temperature ionic liquid (RTIL). The bionanocomposite was synthesized in benzoyl pyridinium chloride [BzPy]Cl to maintain the unique properties of SnO, chitosan, and the ionic liquid. Adsorption and photodegradation processes were applied to evaluate the bionanocomposite for removing azo and anthraquinone dyes and textile wastewater. SnO/[BzPy]Cl and SnO/[BzPy]Cl/Ch samples were prepared and characterized using various techniques, including FT-IR, SEM, XRD, EDAX, XPS, DSC, TGA, nitrogen adsorption/desorption isotherm, and DRS analysis. SEM analysis revealed a hierarchical roughened rose flower-like morphology for the biocomposite. The band gap energies of SnO/[BzPy]Cl and SnO/[BzPy]Cl/chitosan were found to be 3.9 and 3.3 eV, respectively, indicating a reduction in the band gap energy with the introduction of [BzPy]Cl and chitosan. SnO/[BzPy]Cl/Ch showed high removal rates (92-95 %) for Fast Red, Blue 15, Red 120, Blue 94, Yellow 160, and Acid Orange 7 dyes. The adsorption kinetics followed a pseudo-second-order model. In addition, the effect of different photodegradation parameters such as solution pH, dye concentrations, contact time, and amount of photocatalyst, was studied. Given the optimal results obtained in removing azo and anthraquinone dyes, the SnO/[BzPy]Cl/Ch nanocomposite was used as an efficient nanocomposite for removing dyes from textile wastewater. The highest removal efficiency was found to be 95.8 %, obtained under ultraviolet and visible light. Furthermore, BOD and COD reduction analysis showed significant reductions, indicating the excellent performance of the photocatalyst.
RESUMEN
In this study, Hydroxyapatite nanoparticles (HANPs), derived from eggshell waste, were employed to reinforce chitosan biopolymer-based films through the solvent-casting method. The impact of varying HANPs content (1%, 3%, 5%, and 10 wt %) in bionanocomposites was investigated. The influence of HANPs addition on the final film properties was comprehensively analyzed using Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), mechanical (tensile) testing, and Water Vapor Permeability (WVP). The morphological aspects of bionanocomposites and the dispersion of nanoparticles within the matrix were studied using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD). The structural changes in the films were probed using Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) techniques. Results indicated that the addition of 1% and 3% of HANPs exhibited a higher glass transition temperature and improved thermal stability in bionanocomposites. Films with 3% HANPs content exhibited a notable increase in tensile strength, showing a 61.54% increase, while films with 1% HANPs content displayed a 52% reduction in WVP compared to pristine chitosan films. These findings underscore the significant potential of chitosan-hydroxyapatite bionanocomposite films for applications in food packaging applications.
Asunto(s)
Quitosano , Nanopartículas , Animales , Quitosano/química , Durapatita , Cáscara de Huevo , Resistencia a la Tracción , Nanopartículas/químicaRESUMEN
Probiotics have recently received significant attention due to their various benefits, such as the modulation of gut flora, reduction of blood sugar and insulin resistance, prevention and treatment of digestive disorders, and strengthening of the immune system. One of the major issues concerning probiotics is the maintenance of their viability in the presence of digestive conditions and extended shelf life during storage. To address this concern, numerous techniques have been explored to achieve success. Among these methods, the microencapsulation of probiotics has been proposed as the most effective way to overcome this challenge. The combination of nanomaterials with biopolymer coating is considered a novel approach to improve its viability and effective delivery. The use of polysaccharides and proteins-based bionanocomposites for microencapsulation of probiotics has emerged as an efficient and promising approach for maintaining cell viability and targeted delivery. This review article aims to investigate the use of different bionanocomposites in microencapsulation of probiotics and their effect on cell survival in long-term storage and harsh conditions in the gastrointestinal tract.
Asunto(s)
Probióticos , Viabilidad Microbiana , Polisacáridos/farmacología , Tracto GastrointestinalRESUMEN
Shellac bio-coatings can enhance to improve quality and storage stability of fresh egg qualities with improved shell strength therefore minimizing the reduction the egg losses. Shellac bio-chitosan at 3 concentrations (1 %, 4 % and 8 % w/w) and shellac-1 % montmorillonite nanocomposites were applied as biocoatings to improve storage stability. Shellac-8 % (SH-8 %) coated eggs exhibited the lowest weight loss (1.28 %), significantly. The weight loss of shellac 1 % + MMT and 4 % shellac (SH-4 %) coated eggs was similar each other and had lower weight loss than 1 % shellac (SH-1 %). The Haugh Unit (HU) of eggs with SH-8 % (63.75) had the significantly the highest HU. The SH-4 % (60.24) and SH-1 %/MMT-1 % (58.04) were similar, and the control was the lowest one. The albumin pH of SH-8 % (9.15) coated exhibited a significantly lower than SH-4 % (9.21) and SH-1 %/MMT-1 % (9.24), while the control (9.39) was the highest value at end of storage. For the shellac coated group, total soluble values of albumen reached 12.87 (initial) to 16.331 (SH-1 %), 15.96 (SH-4 %), 15.60 (SH-8 %) and 16.15 (SH-%1-MMT-1 %) at the end of storage. The RWC and foam stability of SH-8 %, SH-4 % and SH-1 % MMT-1 % were similar and higher than 1 % SH and uncoated egg samples. The rheology behaviors were maintained with increasing shellac concentration through the storage. SH-8 % biocoatings were very most effective in filling and sealing the porous in the eggshell and protecting the storage stability and enhancing the strength of the eggshell. Shellac bio-coatings acted as a tiny layer for an effective protective barrier to gas permeability for enhancing the storage stability of the fresh eggs. Higher shellac concentrations (4 and 8 %) and 1 %-MMT were enhanced the storage stability and can be vital solutions for improving shell strength, so it decreases breakage rates.