RESUMO
We have systematically investigated the effects of hydrogen annealing on Ni- and Al-contacted carbon nanotube field-effect transistors (CNTFETs), whose work functions have not been affected by hydrogen annealing. Measured results show that the electronic properties of single-walled carbon nanotubes are modified by hydrogen adsorption. The Ni-contacted CNTFETs, which initially showed metallic behavior, changed their p-FET behavior with a high on-current over 10 µA after hydrogen annealing. The on-current of the as-made p-FETs is much improved after hydrogen annealing. The Al-contacted CNTFETs, which initially showed metallic behavior, showed unipolar p-FET behavior after hydrogen annealing. We analyzed the energy band diagrams of the CNTFETs to explain experimental results, finding that the electron affinity and the bandgap of single-walled carbon nanotubes changed after hydrogen annealing. These results are consistent with previously reported ab initio calculations.
RESUMO
We present a complete biosensing system that comprises a Thin Film Transistor (TFT)-based nanoribbon biosensor and a low noise, high-performance bioinstrumentation platform, capable of detecting sub-30 mpH unit changes, validated by an enzymatic biochemical reaction. The nanoribbon biosensor was fabricated top-down with an ultra-thin (15 nm) polysilicon semiconducting channel that offers excellent sensitivity to surface potential changes. The sensor is coupled to an integrated circuit (IC), which combines dual switched-capacitor integrators with high precision analog-to-digital converters (ADCs). Throughout this work, we employed both conventional pH buffer measurements as well as urea-urease enzymatic reactions for benchmarking the overall performance of the system. The measured results from the urea-urease reaction demonstrate that the system can detect urea in concentrations as low as 25 µM, which translates to a change of 27 mpH, according to our initial pH characterisation measurements. The attained accuracy and resolution of our system as well as its low-cost manufacturability, high processing speed and portability make it a competitive solution for applications requiring rapid and accurate results at remote locations; a necessity for Point-of-Care (POC) diagnostic platforms.
Assuntos
Nanotubos de Carbono , Técnicas Biossensoriais , Sistemas Automatizados de Assistência Junto ao Leito , Transistores Eletrônicos , Ureia , UreaseRESUMO
A low cost thin-film transistor (TFT) nanoribbon (NR) sensor has been developed for rapid real-time detection of DNA amplification using an isothermal Recombinase Polymerase Amplification (RPA) method. The semiconductor chip measures DNA amplification through a pH change, rather than via fluorescence. The utility of the method was demonstrated by amplifying CTX-M and NDM, two genes that confer bacterial resistance to cephalosporins and carbapenems, respectively. It is shown that this approach provides extremely fast and sensitive detection. It can detect <10 copies of the gene in genomic DNA extracted from E. coli or K. pneumoniae clinical isolates within a few minutes. A differential readout system was developed to minimize the effect of primer-dimer amplification on the assay. The simple device has the potential for low cost, portable and real-time nucleic acid analysis as a Point of Care device.
Assuntos
Técnicas Biossensoriais/instrumentação , DNA Bacteriano/genética , Escherichia coli/genética , Genes Bacterianos , Klebsiella pneumoniae/genética , Técnicas de Amplificação de Ácido Nucleico/instrumentação , Transistores Eletrônicos , DNA Bacteriano/análise , Farmacorresistência Bacteriana , Desenho de Equipamento , Infecções por Escherichia coli/microbiologia , Humanos , Infecções por Klebsiella/microbiologia , SemicondutoresRESUMO
We describe a low cost thin-film transistor (TFT) nanoribbon sensor for detection of the inflammatory biomarker C-reactive protein (CRP) in human serum via a miniature bead-based enzyme-linked immunosorbent assay (ELISA). The TFT nanoribbon sensor measures the reaction products from the ELISA via pH changes. The bead-based ELISA decouples the protein functionalization steps from the sensor surface, increasing the signal and simplifying the assay. The ability to directly sense proteins in human serum in this way overcomes the Debye length limitation associated with nanowire and nanoribbon biosensors. Compared to classically fabricated nanowires, the TFT nanoribbon sensors are simple, extremely easy to fabricate, and should therefore be much cheaper to manufacture. TFT nanoribbon sensors, configured to measure pH, were used for quantitative detection of CRP spiked into human serum at concentrations as low as 0.2 ng/mL, which is 10â¯000 times lower than needed for diagnostic purposes, providing the potential for applications that require very high sensitivity.
Assuntos
Técnicas Biossensoriais , Proteína C-Reativa/análise , Ensaio de Imunoadsorção Enzimática , Nanotubos de Carbono/economia , Técnicas Biossensoriais/economia , Técnicas Biossensoriais/instrumentação , Ensaio de Imunoadsorção Enzimática/economia , Ensaio de Imunoadsorção Enzimática/instrumentação , Humanos , Nanotubos de Carbono/químicaRESUMO
Silicon nanowires are label-free sensors that allow real-time measurements. They are economical and pave the road for point-of-care applications but require complex readout and skilled personnel. We propose a new model and technique for sensing nanowire sensors using alternating currents (AC) to capture both magnitude and phase information from the sensor. This approach combines the advantages of complex impedance spectroscopy with the noise reduction performances of lock-in techniques. Experimental results show how modifications of the sensors with different surface chemistries lead to the same direct-current (DC) response but can be discerned using the AC approach.
Assuntos
Técnicas Biossensoriais , Eletricidade , Nanofios/química , Algoritmos , Impedância Elétrica , Microfluídica , Modelos Teóricos , Silício/químicaRESUMO
In this work, we investigate sensor design approaches for eliminating the effects of parasitic resistance in nanowire and nanoribbon biosensors. Measurements of pH with polysilicon nanoribbon biosensors are used to demonstrate a reduction in sensitivity as the sensor length is reduced. The sensitivity (normalised conductance change) is reduced from 11% to 5.5% for a pH change from 9 to 3 as the sensing window length is reduced from 51 to 11 µm. These results are interpreted using a simple empirical model, which is also used to demonstrate how the sensitivity degradation can be alleviated by a suitable choice of sensor window length. Furthermore, a differential sensor design is proposed that eliminates the detrimental effects of parasitic resistance. Measurements on the differential sensor give a sensitivity of 15%, which is in good agreement with the predicted maximum sensitivity obtained from modeling.
RESUMO
This paper studies the effect of atomic layer deposition (ALD) temperature on the performance of top-down ZnO nanowire transistors. Electrical characteristics are presented for 10-µm ZnO nanowire field-effect transistors (FETs) and for deposition temperatures in the range 120°C to 210°C. Well-behaved transistor output characteristics are obtained for all deposition temperatures. It is shown that the maximum field-effect mobility occurs for an ALD temperature of 190°C. This maximum field-effect mobility corresponds with a maximum Hall effect bulk mobility and with a ZnO film that is stoichiometric. The optimized transistors have a field-effect mobility of 10 cm(2)/V.s, which is approximately ten times higher than can typically be achieved in thin-film amorphous silicon transistors. Furthermore, simulations indicate that the drain current and field-effect mobility extraction are limited by the contact resistance. When the effects of contact resistance are de-embedded, a field-effect mobility of 129 cm(2)/V.s is obtained. This excellent result demonstrates the promise of top-down ZnO nanowire technology for a wide variety of applications such as high-performance thin-film electronics, flexible electronics, and biosensing.
RESUMO
Polysilicon nanowire biosensors have been fabricated using a top-down process and were used to determine the binding constant of two inflammatory biomarkers. A very low cost nanofabrication process was developed, based on simple and mature photolithography, thin film technology, and plasma etching, enabling an easy route to mass manufacture. Antibody-functionalized nanowire sensors were used to detect the proteins interleukin-8 (IL-8) and tumor necrosis factor-alpha (TNF-α) over a wide range of concentrations, demonstrating excellent sensitivity and selectivity, exemplified by a detection sensitivity of 10 fM in the presence of a 100,000-fold excess of a nontarget protein. Nanowire titration curves gave antibody-antigen dissociation constants in good agreement with low-salt enzyme-linked immunosorbent assays (ELISAs). This fabrication process produces high-quality nanowires that are suitable for low-cost mass production, providing a realistic route to the realization of disposable nanoelectronic point-of-care (PoC) devices.
Assuntos
Técnicas Biossensoriais/instrumentação , Membranas Artificiais , Nanofios/química , Polímeros/química , Silício/química , Reações Antígeno-Anticorpo , Biomarcadores/análise , Cristalização , Ensaio de Imunoadsorção Enzimática , Inflamação , Interleucina-8/análise , Interleucina-8/imunologia , Polímeros/síntese química , Propriedades de Superfície , Fator de Necrose Tumoral alfa/análise , Fator de Necrose Tumoral alfa/imunologiaRESUMO
Hybridization of single-walled carbon nanotubes with plasmonic metamaterials leads to photonic media with an exceptionally strong ultrafast nonlinearity. This behavior is underpinned by strong coupling of the nanotube excitonic response to the weakly radiating Fano-type resonant plasmonic modes that can be tailored by metamaterial design.