Development of Electrochromic Devices, Based on Polymeric Gel, for Energy Saving Applications.

In this work, the implementation of an electrochromic device (10 cm × 10 cm in size) for energy saving applications has been presented. As electrochromic system has been used with an electrochromic solution (ECsol) made by ethyl viologen diperchlorate [EV(ClO4)2], 1,1'-diethyl ferrocene (DEFc) and propylene carbonate (PC), as solvent. The final system has been obtained by mixing the ECsol, described above, with a polymeric system made by Bisphenol-A glycerolate (1 glycerol/phenol) diacrylate (BPA) and 2,2-Dimethoxy-2-phenylacetophenone (Irgacure 651) in a weight percentage equal to 60:40% w/w, respectively. Lithography has been used to make a spacer pattern with a thickness of about 15-20 µm between the two substrates. Micro-Raman spectroscopy confirmed the presence of the EV•+ as justified by the blue color of the electrochromic device in the ON state. Electrochemical and optical properties of the electrochromic device have been studied. The device shows reversible electrochromic behavior as confirmed by cyclic color variation due to the reduction and oxidation process of the EV2+/EV•+ couple. The electrochromic device shows a variation of the % transmittance in the visible region at 400 nm of 59.6% in the OFF state and 0.48% at 3.0 V. At 606 nm the transmittance in the bleached state is 84.58% in the OFF state and then decreases to 1.01% when it is fully colored at 3.0 V. In the NIR region at 890 nm, the device shows a transmittance of 74.3% in the OFF state and 23.7% at 3.0 V while at 1165 nm the values of the transmittance changed from 83.21% in the OFF state to 1.58% in the ON state at 3.0 V. The electrochromic device shows high values of CCR% and exhibits excellent values of CE in both visible and near-infrared regions when switched between OFF/ON states. In the NIR region at 890 nm, electrochromic devices can be used for the energy-saving of buildings with a promising CE of 120.9 cm2/C and 420.1 cm2/C at 1165 nm.

Effects of curcumin in the interaction with cardiolipin-containg lipid monolayers and bilayers.

Curcumin, a plant polyphenol extracted from the Chinese herb turmeric, has gained widespread attention in recent years because of its multifunctional properties as antioxidant, antinflammatory, antimicrobial, and anticancer agent. Effects of the molecule on mitochondrial membranes properties have also been evidenced. In this work, the interaction of curcumin with models of mitochondrial membranes composed of dimyristoylphosphatidylcholine (DMPC) or mixtures of DMPC and 4 mol% tetramyristoylcardiolipin (TMCL) has been investigated by using biophysical techniques. Spectrophotometry and fluorescence allowed to determine the association constant and the binding energy of curcumin with pure DMPC and mixed DMPC/TMCL aqueous bilayers. The molecular organization of pure DMPC and cardiolipin-containing Langmuir monolayers at the air-water interface were investigated and the morphology of the monolayers transferred into mica substrates were characterized through atomic force microscopy (AFM). It is found that curcumin associates at the polar/apolar interface of the lipid bilayers and the binding is favored in the presence of cardiolipin. At 2 mol%, curcumin is well miscible with lipid monolayers, particularly with mixed DMPC/TMCL ones, where compact terraces formation characterized by a reduction of the surface roughness is observed in the AFM topographic images. At 10 mol%, curcumin perturbs the stability of DMPC monolayers and morphologically are evident terraces surrounded by cur aggregates. In the presence of TMCL, very few curcumin aggregates and larger compact terraces are observed. The overall results indicate that cardiolipin augments the incorporation of curcumin in model membranes highlighting the mutual interplay cardiolipin-curcumin in mitochondrial membranes.

Sunset Yellow Confined in Curved Geometry: A Microfluidic Approach.

The behavior of lyotropic chromonic liquid crystals (LCLCs) in confined environments is an interesting research field that still awaits exploration, with multiple key variables to be uncovered and understood. Microfluidics is a highly versatile technique that allows us to confine LCLCs in micrometric spheres. As microscale networks offer distinct interplays between the surface effects, geometric confinement, and viscosity parameters, rich and unique interactions emerging at the LCLC-microfluidic channel interfaces are expected. Here, we report on the behavior of pure and chiral doped nematic Sunset Yellow (SSY) chromonic microdroplets produced through a microfluidic flow-focusing device. The continuous production of SSY microdroplets with controllable size gives the possibility to systematically study their topological textures as the function of their diameters. Indeed, doped SSY microdroplets produced via microfluidics, show topologies that are typical of common chiral thermotropic liquid crystals. Furthermore, few droplets exhibit a peculiar texture never observed for chiral chromonic liquid crystals. Finally, the achieved precise control of the produced LCLC microdroplets is a crucial step for technological applications in biosensing and anticounterfeiting.

Effect of the Combination of Gold Nanoparticles and Polyelectrolyte Layers on SERS Measurements.

In this study, polyelectrolyte (PE) layers are deposited on substrates made by glass covered with an array of gold nanoparticles (GNPs). In particular, the samples studied have 0 PE layers (GGPE0), 3 PE layers (GGPE3), 11 PE layers (GGPE11), and 21 PE layers (GGPE21). All samples have been studied by micro-Raman spectroscopy. An acetic acid solution (10% v/v) has been used as a standard solution in order to investigate the SERS effect induced by different numbers of PE layers in each sample. The Surface Enhancement Raman Spectroscopy (SERS) effect correlating to the number of PE layers deposited on the samples has been shown. This effect is explained in terms of an increase in the interaction between the photon of the laser source and the plasmonic band of the GNPs due to a change of the permittivity of the surrounding medium around the GNPs. The trends of the ratios of the intensities of the Raman bands of the acetic acid solution (acetic acid and water molecules) on the band at 1098 cm-1 ascribed to the substrates increase, and the number of PE layers increases.

Plasticizers and Salt Concentrations Effects on Polymer Gel Electrolytes Based on Poly (Methyl Methacrylate) for Electrochemical Applications.

This work describes the electrochemical properties of a type of PMMA-based gel polymer electrolytes (GPEs). The gel polymer electrolyte systems at a concentration of (20:80) % w/w were prepared from poly (methyl methacrylate), lithium perchlorate LiClO4 and single plasticizer propylene carbonate (PMMA-Li-PC) and a mixture of plasticizers made by propylene carbonate and ethylene carbonate in molar ratio 1:1, (PMMA-Li-PC-EC). Different salt concentrations (0.1 M, 0.5 M, 1 M, 2 M) were studied. The effect of different plasticizers (single and mixed) on the properties of gel polymer electrolytes were considered. The variation of conductivity versus salt concentration, thermal properties using DSC and TGA, anodic stability and FTIR spectroscopy were used in this study. The maximum ionic conductivity of σ = 0.031 S/cm were obtained for PMMA-Li-PC-EC with a salt concentration equal to 1 M. Ion-pairing phenomena and all ion associations were observed between lithium cations, plasticizers and host polymers through FTIR spectroscopy. The anodic stability of the PMMA-based gel polymer electrolytes was recorded up to 4 V. The glass temperatures of these electrolytes were estimated. We found they were dependent on the plasticization effect of plasticizers on the polymer chains and the increase of the salt concentration. Unexpectedly, it was determined that an unreacted PMMA monomer was present in the system, which appears to enhance ion conduction. The presence and possibly the addition of a monomer may be a technique for increasing ion conduction in other gel systems that warrants further study.

New Zinc-Based Active Chitosan Films: Physicochemical Characterization, Antioxidant, and Antimicrobial Properties.

The improvement of the antioxidant and antimicrobial activities of chitosan (CS) films can be realized by incorporating transition metal complexes as active components. In this context, bioactive films were prepared by embedding a newly synthesized acylpyrazolonate Zn(II) complex, [Zn(QPhtBu)2(MeOH)2], into the eco-friendly biopolymer CS matrix. Homogeneous, amorphous, flexible, and transparent CS@Znn films were obtained through the solvent casting method in dilute acidic solution, using different weight ratios of the Zn(II) complex to CS and characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR), Raman, and scanning electron microscopy (SEM) techniques. The X-ray single-crystal analysis of [Zn(QPhtBu)2(MeOH)2] and the evaluation of its intermolecular interactions with a protonated glucosamine fragment through hydrogen bond propensity (HBP) calculations are reported. The effects of the different contents of the [Zn(QPhtBu)2(MeOH)2] complex on the CS biological proprieties have been evaluated, proving that the new CS@Znn films show an improved antioxidant activity, tested according to the DPPH method, with respect to pure CS, related to the concentration of the incorporated Zn(II) complex. Finally, the CS@Znn films were tried out as antimicrobial agents, showing an increase in antimicrobial activity against Gram-positive bacteria (Staphylococcus aureus) with respect to pure CS, when detected by the agar disk-diffusion method.

Low Cost and Easy Validation Anticounterfeiting Plasmonic Tags Based on Thin Films of Metal and Dielectric.

Multilevel anticounterfeiting Physical Unclonable Function (PUF) tags based on thin film of silver (Ag), Zinc Oxide (ZnO) and PolyVinylPyrrolidone (PVP), are experimentally demonstrated and validated. We exploit the low adhesion of silver to glass and consequent degradation during ZnO deposition to induce morphological randomness. Several photographs of the tag surfaces have been collected with different illumination conditions and using two smartphones of diverse brand. The photos were analyzed using an image recognition algorithm revealing low common minutiae for different tags. Moreover, the optical response reveals peculiar spectra due to labels of plasmonic nature. The proposed systems can be easily fabricated on large areas and represent a cost-effective solution for practical protection of objects.

Spherical Confinement of Chromonics: Effects of a Chiral Aminoacid.

Induced or spontaneous chirality in natural systems is an intriguing issue. In recent years, a lot of attention has been focused on chirality of chromonic liquid crystals, a class of materials that is able to self-assemble in columnar structures. However, the mechanism involved in the arising of chirality in these materials, that starts at the molecular level and controls the supramolecular structure, is poorly understood; however, it is certainly affected by ionic strength. In this work we present the results obtained doping Cromolyn, a chromonic material, with a strong helical-twisting-power peptide, and confining it in a spherical geometry. We demonstrate, by means of optical polarized microscopy and structural analysis, that both the geometrical constraint and the presence of the chiral dopant enhance the chiral effect; we also demonstrate that they favor the rise of a highly ordered helical superstructure, that may be optimized upon adding an ionic dye to the system. Finally, we report a procedure for the preparation of free-standing polymeric films, embedding and preserving the microspheres, and paving the way for the creation of biocompatible and eco-friendly optical devices to be used in the sensor and anticounterfeiting fields.

Hybrid Plasmonic/Photonic Nanoscale Strategy for Multilevel Anticounterfeit Labels.

Innovative goods authentication strategies are of fundamental importance considering the increasing counterfeiting levels. Such a task has been effectively addressed with the so-called physical unclonable functions (PUFs), being physical properties of a system that characterize it univocally. PUFs are commonly implemented by exploiting naturally occurring non-idealities in clean-room fabrication processes. The broad availability of classic paradigm PUFs, however, makes them vulnerable. Here, we propose a hybrid plasmonic/photonic multilayered structure working as a three-level strong PUF. Our approach leverages on the combination of a functional nanostructured surface, a resonant response, and a unique chromatic signature all together in one single device. The structure consists of a resonant cavity, where the top mirror is replaced with a layer of plasmonic Ag nanoislands. The naturally random spatial distribution of clusters and nanoparticles formed by this deposition technique constitutes the manufacturer-resistant nanoscale morphological fingerprint of the proposed PUF. The presence of Ag nanoislands allows us to tailor the interplay between the photonic and plasmonic modes to achieve two additional security levels. The first one is constituted by the chromatic response and broad iridescence of our structures, while the second by their rich spectral response, accessible even through a common smartphone light-emitting diode. We demonstrate that the proposed architectures could also be used as an irreversible and quantitative temperature exposure label. The proposed PUFs are inexpensive, chip-to-wafer-size scalable, and can be deposited over a variety of substrates. They also hold a great promise as an encryption framework envisioning morpho-cryptography applications.

Gi Protein Modulation of the Potassium Channel TASK-2 Mediates Vesicle Osmotic Swelling to Facilitate the Fusion of Aquaporin-2 Water Channel Containing Vesicles.

Vesicle fusion is a fundamental cell biological process similar from yeasts to humans. For secretory vesicles, swelling is considered a step required for the expulsion of intravesicular content. Here this concept is revisited providing evidence that it may instead represent a general mechanism. We report the first example that non-secretory vesicles, committed to insert the Aquaporin-2 water channel into the plasma membrane, swell and this phenomenon is required for fusion to plasma membrane. Through an interdisciplinary approach, using atomic force microscope (AFM), a fluorescence-based assay of vesicle volume changes and NMR spectroscopy to measure water self-diffusion coefficient, we provide evidence that Gi protein modulation of potassium channel TASK-2 localized in AQP2 vesicles, is required for vesicle swelling. Estimated intravesicular K⁺ concentration in AQP2 vesicles, as measured by inductively coupled plasma mass spectrometry, was 5.3 mM, demonstrating the existence of an inwardly K⁺ chemical gradient likely generating an osmotic gradient causing vesicle swelling upon TASK-2 gating. Of note, abrogation of K⁺ gradient significantly impaired fusion between vesicles and plasma membrane. We conclude that vesicle swelling is a potentially important prerequisite for vesicle fusion to the plasma membrane and may be required also for other non-secretory vesicles, depicting a general mechanism for vesicle fusion.

Temperature-tunable lasing from dye-doped chiral microdroplets encapsulated in a thin polymeric film.

In the last decade, much interest has grown around the possibility to use liquid-crystal droplets as optical microcavities and lasers. In particular, 3D laser emission from dye-doped cholesteric liquid crystals confined inside microdroplets paves the way for many applications in the field of sensors or tunable photonics. Several techniques can be used to obtain small microresonators as, for example, dispersing a liquid crystal inside an immiscible isotropic fluid to create an emulsion. Recently, the possibility to obtain a thin free-standing film starting from an emulsion having a mixture of water and polyvinyl alcohol as isotropic matrix has been reported. After the water evaporation, a polymeric film in which the microdroplets are encapsulated has been obtained. Bragg-type laser emission has been recorded from the emulsion as well as from the thin film. Here, we report on the possibility to tune the laser emission as a function of temperature. Using a chiral dopant with temperature dependent solubility, the emitted laser wavelength can be tuned in a range of 40 nm by a temperature variation of 18 °C. The proposed device can have applications in the field of sensors and for the development of anti-counterfeiting labels.

Mixed emulsion of liquid crystal microresonators: towards white laser systems.

Microdroplet systems have attracted great interest because of their wide range of applications, easiness in processing and handling, feasibility in developing miniaturized devices with high performances and large flexibility. In this study, a stable emulsion based on different dye-doped chiral liquid crystal droplets has been engineered in order to achieve simultaneous omnidirectional lasing at different wavelengths. To obtain the mixed emulsion of dye doped Bragg onion-type microresonators the twofold action, as a surfactant and a droplet stabilizer, of the polyvinyl alcohol dissolved in water has been exploited. Multiple wavelengths lasing in all directions around the mixed emulsion is demonstrated. By water evaporation, a plastic sheet including different types of chiral droplets is also obtained, retaining all the emission characteristic of the precursor emulsion. A relevant feature is the large flexibility of the preparation method that enables an easy and full control of the lasing spectrum addressing white laser systems. However, the simplicity of the procedure based on a single-step process as well as the high stability of the mixed emulsion is a relevant result, envisaging strong potentiality for developing easy and friendly technologies useful in the field of identification, sensing, imaging, coating and lab-on-a-chip architectures.

Rewritable Optical Storage with a Spiropyran Doped Liquid Crystal Polymer Film.

Rewritable optical storage has been obtained in a spiropyran doped liquid crystal polymer films. Pictures can be recorded on films upon irradiation with UV light passing through a grayscale mask and they can be rapidly erased using visible light. Films present improved photosensitivity and optical contrast, good resistance to photofatigue, and high spatial resolution. These photochromic films work as a multifunctional, dynamic photosensitive material with a real-time image recording feature.

Detection of Gold Nanoparticles Aggregation Growth Induced by Nucleic Acid through Laser Scanning Confocal Microscopy.

The gold nanoparticle (GNP) aggregation growth induced by deoxyribonucleic acid (DNA) is studied by laser scanning confocal and environmental scanning electron microscopies. As in the investigated case the direct light scattering analysis is not suitable, we observe the behavior of the fluorescence produced by a dye and we detect the aggregation by the shift and the broadening of the fluorescence peak. Results of laser scanning confocal microscopy images and the fluorescence emission spectra from lambda scan mode suggest, in fact, that the intruding of the hydrophobic moiety of the probe within the cationic surfactants bilayer film coating GNPs results in a Förster resonance energy transfer. The environmental scanning electron microscopy images show that DNA molecules act as template to assemble GNPs into three-dimensional structures which are reminiscent of the DNA helix. This study is useful to design better nanobiotechnological devices using GNPs and DNA.

Endothelial-like nitric oxide synthase immunolocalization by using gold nanoparticles and dyes.

Immunofluorescence is a biological technique that allows displaying the localization of the target molecule through a fluorescent microscope. We used a combination of gold nanoparticles and the fluorescein isothiocianate, FITC, as optical contrast agents for laser scanning confocal microscopy imaging to localize the endothelial-like nitric oxide synthase in skeletal muscle cells in a three-dimensional tissue phantom at the depth of 4µm. The FITC detected fluorescence intensity from gold-nanoparticles-labelled cells was brighter than the emission intensity from unlabelled cells.

Ultraviolet A: Visible spectral absorbance of the human cornea after transepithelial soaking with dextran-enriched and dextran-free riboflavin 0.1% ophthalmic solutions.

PURPOSE: To evaluate the stromal concentration of 2 commercially available transepithelial riboflavin 0.1% solutions in human donor corneas with the use of spectrophotometry. SETTING: University of Calabria, Rende, Italy. DESIGN: Experimental study. METHODS: The absorbance spectra of 12 corneal tissues were measured in the 330 to 700 nm wavelength range using a purpose-designed spectrophotometry setup before and after transepithelial corneal soaking with a 15% dextran-enriched riboflavin 0.1% solution (n = 6) or a hypotonic dextran-free riboflavin 0.1% solution (n = 6). Both ophthalmic solutions contained ethylenediaminetetraacetic acid and trometamol as enhancers. In addition, 4 deepithelialized corneal tissues underwent stromal soaking with a 20% dextran-enriched riboflavin 0.1% solution and were used as controls. All the riboflavin solutions were applied topically for 30 minutes. The stromal concentration of riboflavin was quantified by analysis of absorbance spectra of the cornea collected before and after application of each solution. RESULTS: The mean stromal riboflavin concentration was 0.012% ± 0.003% (SD), 0.0005% ± 0.0003% (P < .001), and 0.004% ± 0.001% (P < .01) in tissues soaked with 20% dextran-enriched, 15% dextran-enriched, and hypotonic dextran-free solutions, respectively. The difference of stromal riboflavin concentration between the 2 transepithelial solutions was statistically significant (P < .01). CONCLUSIONS: Dextran-enriched solutions required complete corneal deepithelialization to permit effective stromal soaking with riboflavin. Nevertheless, riboflavin in hypotonic dextran-free solution with enhancers permeates across stroma through an intact epithelium. FINANCIAL DISCLOSURE: No author has a financial or proprietary interest in any material or method mentioned.

Light-controllable linear dichroism in nematics.

We report a method to obtain a light-controllable dichroism. The main effect is achieved using spiropyran-doped (SP-doped) nematic liquid crystal mixtures. SP molecules exhibit a high solubility in the liquid crystal host, which can vary between 1% and 4% in weight, without destroying the liquid crystalline phase. Due to their elongated shape, SP molecules are oriented along the nematic liquid crystal director. The obtained linear dichroism was measured to be 1.08 with a dichroic ratio of 7.12. Further, a two-direction linear dichroism was obtained by adding a dichroic dye to the mixture. The angle between the two dichroic axes was found to be 11°. Two-direction linear dichroism is also light controllable and can be switched back to one-direction dichroism.

Electrically controllable multicolor cholesteric laser.

A new strategy to obtain multicolor lasing from cholesteric liquid crystals is presented. A four layer cell is prepared with three different cholesteric layers and a layer containing a photoluminescent dye. The three cholesteric mixtures are prepared so that their photonic band gaps are partially overlapped. Through this combination, two laser lines are obtained in the same spot under the pumping beam irradiation. Eventually, one of the laser lines can be switched off if an electric field is applied to the first or the last cholesteric layer.

Interaction of ultraviolet light with the cornea: clinical implications for corneal crosslinking.

UNLABELLED: Understanding ultraviolet (UV) interaction with the human corneal tissue is of interest among corneal specialists given the widespread application of corneal crosslinking. This article reviews the current knowledge of light interaction with the cornea in the UV wavelength range. It also uses a novel experimental study to illustrate the role of 2 important corneal properties that have not yet been clarified: the epithelial contribution to overall UVA corneal absorbance and the regional anisotropy of UVA light transmittance. Finally, it presents the most recent insights into how different methods of UVA light irradiation and corneal soaking with riboflavin influence the outcome of corneal crosslinking. FINANCIAL DISCLOSURE: No author has a financial or proprietary interest in any material or method mentioned.

Visual micro-thermometers for nanoparticles photo-thermal conversion.

We present a method to calibrate the light to heat conversion in an aqueous fluid containing nanoparticles. Accurate control of light and heat is of dramatic importance in many fields of science and metal nanoparticles have acquired an increased importance as means to address heat in very small areas when irradiated with an intense light. The proposed method enables to measure the temperature in the environment surrounding nanoparticles, as a function of the exposure time to laser radiation, exploiting the properties of thermochromic cholesteric liquid crystals. This method overcomes the problems of miscibility of nanoparticles in liquid crystals, provides temperature reading at the microscale, since the cholesteric liquid crystal is confined in microdroplets, and it is sensitive to a temperature variation, 28°C-49°C, suitable for biological applications.