Single electron reduction of NHC-CO2-borane compounds.

The carbon dioxide radical anion [CO2˙-] is a highly reactive species of fundamental and synthetic interest. However, the direct one-electron reduction of CO2 to generate [CO2˙-] occurs at very negative reduction potentials, which is often a limiting factor for applications. Here, we show that NHC-CO2-BR3 species - generated from the Frustrated Lewis Pair (FLP)-type activation of CO2 by N-heterocyclic carbenes (NHCs) and boranes (BR3) - undergo single electron reduction at a less negative potential than free CO2. A net gain of more than one volt was notably measured with a CAAC-CO2-B(C6F5)3 adduct, which was chemically reduced to afford [CAAC-CO2-B(C6F5)3˙-]. This room temperature stable radical anion was characterized by EPR spectroscopy and by single-crystal X-ray diffraction analysis. Of particular interest, DFT calculations showed that, thanks to the electron withdrawing properties of the Lewis acid, significant unpaired spin density is localised on the carbon atom of the CO2 moiety. Finally, these species were shown to exhibit analogous reactivity to the carbon dioxide radical anion [CO2˙-] toward DMPO. This work demonstrates the advantage provided by FLP systems in the generation and stabilization of [CO2˙-]-like species.

Doubly Base-Stabilized Diborane(4) and Borato-Boronium Species and Their Chemistry with Chalcogens.

In an effort to isolate diborane(4) derivatives, we have developed an efficient and uncatalyzed approach using [BH3·THF] and the mercaptopyridine ligand. Thermolysis of 2-mercaptopyridine, in the presence of [BH3·THF], afforded a doubly base-stabilized diborane(4) species 1, [HB(µ-C5H4NS)]2, along with the formation of its isomeric species 2, [HB(µ-C5H4NS)]2, albeit in less yield. Based on the coordination of the boron with the mercaptopyridine ligand in 2 and its spectroscopic data, compound 2 has been designated as a borato-boronium species, in which the anionic borate and cationic boronium units are covalently bonded to each other. Furthermore, we have demonstrated the oxidative insertion of chalcogen atoms (S and Se) through the B-B bond of the base-stabilized diborane(4), 1, that yielded chalcogenido-diboron species, 3(S) and 4(Se).

Group IV Complexes with Sterically Congested N-Aryl-adamantylcarbamidate Ligands.

Metalation of N-(2,6-dibenzhydryl-4-tolyl)adamantane-1-carboxamide (1, Ar*N(H)-C(O)-Ad) with M(NMe2)4 (M = Ti, Zr, Hf) yields amidate complexes Ar*N=C(Ad)-O-Ti(NMe2)3 (2) as well as bis(amidate) compounds (Ar*N=C(Ad)-O)2M(NMe2)2 (M = Zr (3), Hf (4)). In 2, the amidate ligand acts as a monodentate base via the oxygen atom with the Ti center in a slightly distorted tetrahedral environment. The steric requirement of the amidate ligand stabilizes the small coordination number of four of the Ti atom. In congeners 3 and 4, two bidentate amidate ligands exist in the coordination spheres, leading to hexacoordinate group IV metal atoms. The small bite angles of the Zr- and Hf-bound amidate ligands lead to severe distortion of the octahedral environments of the Zr and Hf centers. Titanium compound 2 is an unsuitable choice to catalyze hydrofunctionalization of alkynes with amines and phosphane oxides and despite the significantly smaller pKa value of the carboxylic amide, formation of carboxamide 1 is the dominant reaction upon addition of amines or phosphane oxides to release intramolecular steric strain introduced by the very bulky adamantylamidato ligand.

Synthesis and Coordination of a Bisphosphine-[NHC-borane] Compound: A Ligand Framework for Bimetallic Structure Featuring a Boron-Bridging Moiety.

We report herein the synthesis of a bisphosphine-[NHC-BH3] compound and its coordination toward gold. The ligand is shown to support a bimetallic structure bisphosphine-[NHC-BH3](AuCl)2. The abstraction of one chloride from the gold metal center triggers the activation of a BH3 fragment, leading to the reductive elimination of H2 and the formation of a dicationic Au42+ complex featuring Au centers at the +0.5 oxidation state, via a (µ-H)Au2 intermediate, characterized in situ at 183 K. The reactivity of Au4 with thiophenol led to the reoxidation of the gold metal centers to a (µ-S(Ph))Au2 complex. In the different complexes, borane fragment was shown to bridge the Au2 core via weak interaction with [BH], [BCl], and [BH2] moieties.

A Masked Form of an O-Borylated Breslow Intermediate for the Diastereoselective FLP-Type Activation of Aldehydes.

Breslow intermediates are very often elusive species whose application in frustrated Lewis pair (FLP) chemistry is unprecedented. Described herein is the use of a masked form of an O-borylated Breslow (OBB) intermediate that performs FLP-type activation of the carbonyl function of five different benzaldehyde derivatives with complete diastereoselectivity. The resulting compounds are characterised in solution by NMR spectroscopy (compounds 4-8) and in solid state by X-ray diffraction analysis (compounds 4-6). A combined kinetic and theoretical investigation reveals the associative nature of the rate determining step and suggests that the OBB intermediate part is never released during the whole process.

Synthesis and characterisation of a very low-coordinate diferrous [2Fe-2S]0 unit.

Here we present the synthesis of a unique diferrous [2Fe-2S]0 complex with only three-coordinate iron ions via reduction of a four-coordinate diferric [2Fe-2S]2+ complex with concomitant ligand loss. The obtained compounds were thoroughly examined for their properties (e.g. by 57Fe Mössbauer spectroscopy and magnetic susceptibility measurements). Facile cleavage of the [2Fe-2S] rhombus, commonly seen as rather stable, by CS2 is also shown.

Enantioselective Reductive Oligomerization of Carbon Dioxide into l-Erythrulose via a Chemoenzymatic Catalysis.

A cell-free enantioselective transformation of the carbon atom of CO2 has never been reported. In the urgent context of transforming CO2 into products of high value, the enantiocontrolled synthesis of chiral compounds from CO2 would be highly desirable. Using an original hybrid chemoenzymatic catalytic process, we report herein the reductive oligomerization of CO2 into C3 (dihydroxyacetone, DHA) and C4 (l-erythrulose) carbohydrates, with perfect enantioselectivity of the latter chiral product. This was achieved with the key intermediacy of formaldehyde. CO2 is first reduced selectively by 4e- by an iron-catalyzed hydroboration reaction, leading to the isolation and complete characterization of a new bis(boryl)acetal compound derived from dimesitylborane. In an aqueous buffer solution at 30 °C, this compound readily releases formaldehyde, which is then involved in selective enzymatic transformations, giving rise either (i) to DHA using a formolase (FLS) catalysis or (ii) to l-erythrulose with a cascade reaction combining FLS and d-fructose-6-phosphate aldolase (FSA) A129S variant. Finally, the nature of the synthesized products is noteworthy, since carbohydrates are of high interest for the chemical and pharmaceutical industries. The present results prove that the cell-free de novo synthesis of carbohydrates from CO2 as a sustainable carbon source is a possible alternative pathway in addition to the intensely studied biomass extraction and de novo syntheses from fossil resources.

Borane-catalysed dinitrogen borylation by 1,3-B-H bond addition.

The borylation of ligated dinitrogen by 1,3-B-H bond addition over a W-N[triple bond, length as m-dash]N unit using various hydroboranes has been examined. In a previous study, we have shown that Piers' borane (1) reacted with the tungsten dinitrogen complex 2 to afford a boryldiazenido-hydrido-tungsten species. The ease and mildness of this reaction have encouraged us to extend its scope, with the working hypothesis that 1 could potentially catalyse the 1,3-B-H bond addition of other hydroboranes. Under productive reaction conditions, dicyclohexylborane (HBCy2) and diisopinocampheylborane (HBIpc2) underwent retro-hydroboration to give cyclohexylborane (H2BCy) or isopinocampheylborane (H2BIpc), respectively; these monoalkylboranes act as N2-borylating agents in the presence of a catalytic amount of 1. Under similar conditions, 9-borabicyclononane (9-BBN) slowly adds over the W-N[triple bond, length as m-dash]N unit without rearrangement to a monoalkylborane. Catecholborane (HBcat) undergoes the 1,3-B-H bond addition without the need for a catalyst. We were not able to build more than one covalent B-N bond between the terminal N of the N2 ligand and the boron reagent with this methodology.

Quasilinear 3d-metal(i) complexes [KM(N(Dipp)SiR3)2] (M = Cr-Co) - structural diversity, solution state behaviour and reactivity.

The synthesis and characterization of neutral quasilinear 3d-metal(i) complexes of chromium to cobalt of the type [KM(N(Dipp)SiMe3)2] (Dipp = 2,6-di-iso-propylphenyl) are reported. In solid state these metal(i) complexes either occur as isolated molecules (Co) or are part of a potassium ion linked 1D-coordination polymer (Cr-Fe). In solution the potassium cation is either ligated within the ligand sphere of the metal silylamide or is separated from the complex depending on the solvent. For iron, we showcase that it is possible to use sodium or lithium metal for the reduction of the metal(ii) precursor. However, in these cases the resulting iron(i) complexes can only be isolated upon cation separation using an appropriate crown-ether. Further, the neutral metal(i) complexes are used to introduce NBu4+ as an organic cation in the case of cobalt and iron. The impact of the intramolecular cation complexation was further demonstrated upon reaction with diphenyl acetylene which leads to bond formation processes and redox disproportionation instead of η2-alkyne complex formation.

Cooperative B-H and Si-H Bond Activations by κ2-N,S-Chelated Ruthenium Borate Complexes.

Cooperative E-H (E = B, Si) bond activations employing κ2-N,S-chelated ruthenium borate species, [PPh3{κ2-N,S-(NS2C7H4)}Ru{κ3-H,S,S'-H2B(NC7H4S2)2}], (1) are established. Treatment of 1 with BH3·SMe2 yielded the six-membered ruthenaheterocycle [PPh3{κ2-S,H-(BH3NS2C7H4)}Ru{κ3-H,S,S'-H2B(C7H4NS2)2}] (2) formed by a hemilabile ring opening of a Ru-N bond and capturing of a BH3 unit coordinated in an "end-on" fashion. On the other hand, the bulky borane H2BMes shows different reactivity with 1 that led to the formation of the two dihydroborate complexes [{κ3-S,H,H-(NBH2Mes)(S2C7H4)}Ru{κ3-H,S,S'-H2B(C7H4NS2)2}] (3) and [PPh3{κ3-S,H,H-(NBH2Mes)(S2C7H4)}Ru(κ2-N,S-C7H4NS2)] (4), in which H2BMes has been inserted into the Ru-N bond of the initial κ2-N,S-chelated ligand. In an attempt to directly activate hydrosilanes by 1, reactions were carried out with H2SiPh2 that yielded two isomeric five-membered ruthenium silyl complexes, namely [PPh3{κ2-S,Si-(NSiPh2)(S2C7H4)}Ru{κ3-H,S,S'-H2B(C7H4NS2)2}] (5a,b), and the hydridotrisilyl complex [Ru(H){κ2-S,Si-(SiPh2NC7H4S2}3] (6). These complexes were generated by Si-H bond activation with the release of H2 and the formation of N-Si and Ru-Si bonds. When the reaction of 1 was carried out in the presence of PhSiH3, the reaction only produced the analogous complexes [PPh3{κ2-S,Si-(NSiPhH)(S2C7H4)}Ru{κ3-H,S,S'-H2B(C7H4NS2)2}] (5a',b'). Density functional theory (DFT) calculations have been used to probe the bonding modes of boranes/silane with the ruthenium center.

Synthesis and reactivity of phosphine borohydride compounds.

Four lithium phosphine borohydride compounds featuring phenyl and naphthyl linkers have been synthesized. In-depth NMR analysis affords evidence for non-bonded through space P-B coupling. Reactivity towards CO2 leads to LiH transfer and to the quantitative formation of the corresponding ambiphilic phosphine-borane products.

NH3 formation from N2 and H2 mediated by molecular tri-iron complexes.

Living systems carry out the reduction of N2 to ammonia (NH3) through a series of protonation and electron transfer steps under ambient conditions using the enzyme nitrogenase. In the chemical industry, the Haber-Bosch process hydrogenates N2 but requires high temperatures and pressures. Both processes rely on iron-based catalysts, but molecular iron complexes that promote the formation of NH3 on addition of H2 to N2 have remained difficult to devise. Here, we isolate the tri(iron)bis(nitrido) complex [(Cp'Fe)3(µ3-N)2] (in which Cp' = η5-1,2,4-(Me3C)3C5H2), which is prepared by reduction of [Cp'Fe(µ-I)]2 under an N2 atmosphere and comprises three iron centres bridged by two µ3-nitrido ligands. In solution, this complex reacts with H2 at ambient temperature (22 °C) and low pressure (1 or 4 bar) to form NH3. In the solid state, it is converted into the tri(iron)bis(imido) species, [(Cp'Fe)3(µ3-NH)2], by addition of H2 (10 bar) through an unusual solid-gas, single-crystal-to-single-crystal transformation. In solution, [(Cp'Fe)3(µ3-NH)2] further reacts with H2 or H+ to form NH3.

Versatile CO2 Transformations into Complex Products: A One-pot Two-step Strategy.

CO2 transformations using a one-pot two-step method are presented herein. The purpose of the method is to give access to a variety of value-added products and notably to generate chiral carbon centers. The crucial first step consists in the selective double hydroboration of CO2 catalyzed by an iron hydride complex. The product obtained with this 4 e- reduction is a rare bis(boryl)acetal, compound 1, which is subjected in situ to three different reactions in a second step. The first reaction concerns a condensation reaction with (diisopropyl)phenylamine affording the corresponding imine 2. In the second and third reaction, intermediate 1 reacts with triazol-5-ylidene (Enders' carbene) to afford compounds 3 or 4, depending on the reaction conditions. In both compounds, C-C bonds are formed, and chiral centers are generated from CO2 as the only source of carbon. Compound 4 exhibits two chiral centers obtained in a diastereoselective manner in a formose-type mechanism. We proved that the remaining boryl fragment plays a key role in this unprecedented stereocontrol. The interest of the method stands on the reactive and versatile nature of 1, giving rise to various complex molecules from a single intermediate. The complexity of a two-step method is compensated by the overall short reaction time (2 h for the larger reaction time), and mild reaction conditions (25 °C to 80 °C and 1 to 3 atm of CO2).

Ising-type Magnetic Anisotropy and Slow Relaxation of the Magnetization in Four-Coordinate Amido-Pyridine FeII Complexes.

A family of four-coordinate FeII complexes formed with N,N'-chelating amido-pyridine ligands was synthesized, and their magnetic properties were investigated. These distorted tetrahedral complexes exhibit significant magnetic anisotropy with zero-field splitting parameter D ranging between -17 and -12 cm-1. Ab initio calculations enabled identification of the structural factors that control the nature of the magnetic anisotropy and the rationalization of the variation of D in these complexes. It is shown that a reduced N-Fe-N angle involving the chelating nitrogen atoms of the ligands is at the origin of the negative D value and that the torsion between the two N-Fe-N planes imposed by steric hindrances further increases the |D| value. Field-induced slow relaxation of magnetization was observed for the three compounds, and a single-molecule magnet behavior with an energy barrier for magnetization flipping (Ueff) of 27 cm-1 could be evidenced for one of them.

Homoleptic Two-Coordinate Silylamido Complexes of Chromium(I), Manganese(I), and Cobalt(I).

Anionic two-coordinate complexes of first-row transition-metal(I) centres are rare molecules that are expected to reveal new magnetic properties and reactivity. Recently, we demonstrated that a N(SiMe3)2(-) ligand set, which is unable to prevent dimerisation or extraneous ligand coordination at the +2 oxidation state of iron, was nonetheless able to stabilise anionic two-coordinate Fe(I) complexes even in the presence of a Lewis base. We now report analogous Cr(I) and Co(I) complexes with exclusively this amido ligand and the isolation of a [Mn(I){N(SiMe3)2}2]2(2-) dimer that features a Mn-Mn bond. Additionally, by increasing the steric hindrance of the ligand set, the two-coordinate complex [Mn(I){N(Dipp)(SiMe3)}2](-) was isolated (Dipp=2,6-iPr2-C6H3). Characterisation of these compounds by using X-ray crystallography, NMR spectroscopy, and magnetic susceptibility measurements is provided along with ligand-field analysis based on CASSCF/NEVPT2 ab initio calculations.

Iron-Catalyzed Reduction of CO2 into Methylene: Formation of C-N, C-O, and C-C Bonds.

We report herein the use of the (dihydrido)iron catalyst, Fe(H)2(dmpe)2, for the selective reduction of CO2 into either bis(boryl)acetal or methoxyborane depending on the hydroborane used as a reductant. In a one-pot two-step procedure, the in situ generated bis(boryl)acetal was shown to be a reactive and versatile source of methylene to create new C-N but also C-O and C-C bonds.

Iron-catalyzed C-H borylation of arenes.

Well-defined iron bis(diphosphine) complexes are active catalysts for the dehydrogenative C-H borylation of aromatic and heteroaromatic derivatives with pinacolborane. The corresponding borylated compounds were isolated in moderate to good yields (25-73%) with a 5 mol% catalyst loading under UV irradiation (350 nm) at room temperature. Stoichiometric reactivity studies and isolation of an original trans-hydrido(boryl)iron complex, Fe(H)(Bpin)(dmpe)2, allowed us to propose a mechanism showing the role of some key catalytic species.

Two-coordinate iron(I) complex [Fe{N(SiMe3)2}2](-) : synthesis, properties, and redox activity.

First-row two-coordinate complexes are attracting much interest. Herein, we report the high-yield isolation of the linear two-coordinate iron(I) complex salt [K(L)][Fe{N(SiMe3 )2 }2 ] (L=18-crown-6 or crypt-222) through the reduction of either [Fe{N(SiMe3 )2 }2 ] or its three-coordinate phosphine adduct [Fe{N(SiMe3 )2 }2 (PCy3 )]. Detailed characterization is gained through X-ray diffraction, variable-temperature NMR spectroscopy, and magnetic susceptibility studies. One- and two-electron oxidation through reaction with I2 is further found to afford the corresponding iodo iron(II) and diiodo iron(III) complexes.

Ruthenium-catalyzed reduction of carbon dioxide to formaldehyde.

Functionalization of CO2 is a challenging goal and precedents exist for the generation of HCOOH, CO, CH3OH, and CH4 in mild conditions. In this series, CH2O, a very reactive molecule, remains an elementary C1 building block to be observed. Herein we report the direct observation of free formaldehyde from the borane reduction of CO2 catalyzed by a polyhydride ruthenium complex. Guided by mechanistic studies, we disclose the selective trapping of formaldehyde by in situ condensation with a primary amine into the corresponding imine in very mild conditions. Subsequent hydrolysis into amine and a formalin solution demonstrates for the first time that CO2 can be used as a C1 feedstock to produce formaldehyde.