[Hand hygiene and pandemic. Controversies]. / Higiene de manos y pandemia. Controversias.

During the COVID-19 pandemic, the world's healthcare systems were extremely strained. Intensive care units were stretched to capacity and healthcare facilities were forced to set up spaces to care for critically ill patients. Professionals were required to work in strenuous conditions, completely disrupting their work routines.In this scenario, hand hygiene and the use of gloves by healthcare professionals became a critical point of transmission risk.The results of the ENVIN study in 2020 and 2021, corresponding to the pandemic period, showed worrying data on the increase in infection rates, with rates rising by 250% at the worst moments of the pandemic. This suggested that excessive risk situations were occurring for the patient. Any preventive strategy must place correct hand hygiene and proper use of gloves among its priority objectives. For this reason, the Project Zero Advisory Board made a series of adaptations and recommendations based on available evidence and expert opinion related to hand hygiene and glove use during the pandemic situation to promote best practice in extreme situations. This article reviews the key aspects of hand hygiene as part of the WHO safety strategy, the main barriers to compliance and the main adaptations proposed by the Advisory Board of the Zero projects.

Pilot study for low-cost model validation in laparoscopic pediatric pyeloplasty simulation. / Estudio piloto para la validación de un modelo de bajo coste en la simulación de la pieloplastia laparoscópica pediátrica.

OBJECTIVE: To describe the creation of an original 3D-printed liquid latex model designed for laparoscopic pyeloplasty (LP) simulation in infants, and to assess its usefulness. MATERIALS AND METHODS: A 3D model of a dilated pelvis and a ureter with ureteropelvic junction obstruction (UPJO) was designed. It was covered in liquid latex, which allowed flexible models to be achieved in order to conduct pyeloplasty in a pelvitrainer. The total price of each model was 6 euros. A nearly-experimental, non-randomized, blind study was carried out, while measuring operating times and OSATS (Objective Structured Assessment of Technical Skills) scores. Following simulation completion, a survey based on Likert scale was conducted to assess overall appearance, texture, usefulness, and probability of recommending the model for regular training. RESULTS: 8 pediatric surgeons spent a median of 71.5 minutes (range: 50-86), and rated the model with a median 20.1/30 (range: 17-24) OSATS score. The model received a 4.25 (range: 3-5) score in terms of overall appearance, a 4.37 (range: 3-5) score in terms of texture, a 4.5 (range: 4-5) score in terms of usefulness, and a 4.6 (range: 4-5) score in terms of probability of recommending the model for regular training. CONCLUSIONS: Our liquid latex model for laparoscopic pyeloplasty simulation is feasible, with favorable preliminary results. Its usefulness in laparoscopic pyeloplasty training is promising.

OBJETIVOS: Describir la creación de un modelo original de látex líquido diseñado para la simulación de la pieloplastia laparoscópica (PL) en lactantes, construido a partir de una impresión tridimensional (3D), y valorar su utilidad. MATERIAL Y METODOS: Se diseñó un modelo 3D de una pelvis dilatada y un uréter con estenosis pieloureteral (EPU), que fue recubierto por látex líquido obteniendo modelos flexibles para realizar la pieloplastia en un pelvitrainer. El precio total de cada modelo fue de 6 euros. Se realizó un estudio cuasiexperimental, ciego y no aleatorizado, midiendo el tiempo quirúrgico y la puntuación OSATS (Objective Structured Assessment of Technical Skills). Tras completar la simulación, se realizó una encuesta utilizando la escala de Likert, en la cual se valoró el aspecto general, la textura, la utilidad del modelo y el grado de recomendación en el entrenamiento habitual. RESULTADOS: 8 cirujanos pediátricos dedicaron una mediana de 71,5 minutos (R 50-86), y puntuaron una mediana de 20,1/30 (R 17-24) en la escala OSATS. El modelo obtuvo una valoración de 4,25 (R3-5) en aspecto general, 4,37 (R3-5) en textura, 4,5 (R 4-5) en utilidad y 4,6 (R 4-5) en recomendación para incorporar al entrenamiento habitual. CONCLUSIONES: El uso de nuestro modelo de látex líquido para la simulación de la pielopalstia laparoscópica es factible y los resultados preliminares han sido favorables. Su utilidad como herramienta en el entrenamiento de la pieloplastia laparoscópica es prometedora.

Estudio piloto para la validación de unmodelo de bajo coste en la simulación de la pieloplastia laparoscópica pediátrica / Pilot study for low-cost model validation in laparoscopic pediatric pyeloplasty simulation

Objetivos: Describir la creación de un modelo original de látex líquido diseñado para la simulación de la pieloplastia laparoscópica (PL) en lactantes, construido a partir de una impresión tridimensional (3D), y valorar su utilidad. Material y métodos: Se diseñó un modelo 3D de una pelvis dilataday un uréter con estenosis pieloureteral (EPU), que fue recubierto por látex líquido obteniendo modelos flexibles para realizar la pieloplastia en un pelvitrainer. El precio total de cada modelo fue de 6 euros. Se realizó un estudio cuasiexperimental, ciego y no aleatorizado, midiendo el tiempo quirúrgico y la puntuación OSATS (Objective Structured Assessment of Technical Skills). Tras completar la simulación, se realizó una encuesta utilizando la escala de Likert, en la cual se valoró el aspecto general, la textura, la utilidad del modelo y el grado de recomendación en el entrenamiento habitual. Resultados: Ocho cirujanos pediátricos dedicaron una mediana de71,5 minutos (R 50-86), y puntuaron una mediana de 20,1/30 (R 17-24)en la escala OSATS. El modelo obtuvo una valoración de 4,25 (R3-5) en aspecto general, 4,37 (R3-5) en textura, 4,5 (R 4-5) en utilidad y 4,6(R 4-5) en recomendación para incorporar al entrenamiento habitual. Conclusiones: El uso de nuestro modelo de látex líquido para lasimulación de la pielopalstia laparoscópica es factible y los resultados preliminares han sido favorables. Su utilidad como herramienta en el entrenamiento de la pieloplastia laparoscópica es prometedora.(AU)

Objective: To describe the creation of an original 3D-printed liquid latex model designed for laparoscopic pyeloplasty (LP) simulation in infants, and to assess its usefulness. Materials and methods: A 3D model of a dilated pelvis and a ureter with ureteropelvic junction obstruction (UPJO) was designed. It was covered in liquid latex, which allowed flexible models to be achieved in order to conduct pyeloplasty in a pelvitrainer. The total price of each model was 6 euros. A nearly-experimental, non-randomized, blind study was carried out, while measuring operating times and OSATS (Objective Structured Assessment of Technical Skills) scores. Following simulation completion, a survey based on Likert scale was conducted to assess overall appearance, texture, usefulness, and probability of recommending the model for regular training. Results.: 8 pediatric surgeons spent a median of 71.5 minutes (range: 50-86), and rated the model with a median 20.1/30 (range: 17-24) OSATS score. The model received a 4.25 (range: 3-5) score in terms of overall appearance, a 4.37 (range: 3-5) score in terms of texture, a 4.5 (range: 4-5) score in terms of usefulness, and a 4.6 (range: 4-5) score in terms of probability of recommending the model for regular training. Conclusions: Our liquid latex model for laparoscopic pyeloplasty simulation is feasible, with favorable preliminary results. Its usefulness in laparoscopic pyeloplasty training is promising.(AU)

KrCl and XeCl excilamps and LP-Hg lamp for UV and UV/H2O2 decolourization of dyes in water.

In the present study, the decolourization efficiencies of LP-Hg lamp, XeCl and KrCl excilamps at the same power density were compared for the decolourization of dyes in water by UV and UV/H2O2 processes in a batch reactor. Laboratory prototypes of XeCl and KrCl excilamps and a commercial LP-Hg lamp were studied as UV sources. Methylene Blue and Eliamine Blue dyes were used as model pollutants. The effect of the initial concentrations of dye and H2O2 in the TOC removal and kinetic parameters were also studied. The ratio of dye decolourization to the electric power consumption of the KrCl excilamp and LP-Hg lamp for the decolourization of Methylene Blue and Eliamine Blue were evaluated. As a result, the KrCl excilamp showed significantly higher decolourization efficiencies than LP-Hg lamp and XeCl excilamp, but the dye removal rate was significantly slower for Methylene Blue than for Eliamine Blue with this lamp. The KrCl lamp can be an alternative to conventional LP-Hg lamp for the decolourization of dyes by photodegradation, but it depends on the type of dye treated. The addition of H2O2 in a concentration between 0.05 and 0.09%v/v increases significantly the efficiency of the decolourization of Methylene Blue, and further increase does not lead to a higher increase in conversion. The experimental data were fitted to the one phase decay kinetic model with good agreement and the kinetic parameters were reported.

[Hospital admission and mortality causes of HIV patients in a third level hospital]. / Diagnóstico al alta y causas de mortalidad de pacientes VIH+ ingresados en un hospital de tercer nivel.

OBJECTIVE: The aim of this study is to describe the HIV population admitted to a tertiary level hospital and analyze hospital admission and mortality causes during hospitalization. METHODS: Observational, retrospective study carried out in a third level Hospital. Inclusion criteria: Patients ≥18 years with a prescription of ART and diagnosis of HIV known or discovered during admission. It was accepted hospital ward discharge diagnose as hospitalization causes. Clinical, analytical outcomes as well as causes of mortality were collected. RESULTS: Among 162 hospitalized HIV infected, 128 met the inclusion criteria, 8 of those were diagnosed as naive HIV patients. 79.7% were male; Age 50.29 ± 9.81 years. The main reasons for hospital admissions (38.3%) were certain infectious and parasitic diseases (ICD-10 Classification) and more specifically human immunodeficiency virus [HIV] disease represented 24,1% of whole hospitalizations. Mortality rates of ≥18 years HIV patients that were admitted to hospital during 2016-2017 were the 13.52%. The main causes of death were certain infectious and parasitic diseases followed by malignancies. CONCLUSIONS: Our results emphasize the need of intensifying the HIV early diagnosis as well as Pneumocystis jirovecii primary prophylaxis. Insist on ART adherence from infectology follow-up appointment and pharmacy care consultations, educate clinics on ART treatment prescription during hospital admission as well as requesting viral and CD4 lymphocytes loads to every HIV admitted patients.

Capillary electrophoresis and mutational images of hemoglobin sendagi [Β42 (CD1) PHE → VAL; HBB: C.127T→G].

We report two cases of hemoglobin Sendagi in a Romanian family residing in Spain: a four-year-old boy and his mother, who had been previously diagnosed with another type of congenital hemolytic anemia and had undergone splenectomy in her country during childhood. The unstable hemoglobin variant, hemoglobin Sendagi, is characterized by decreased oxygen affinity caused by replacement of one of the critical amino acid residues, phenylalanine beta 42 (CD1) of the beta-chain, with valine in the heme pocket, resulting in methemoglobin formation. As a result of migratory movements in Europe, new disease-causing hemoglobin variants are emerging in our country. Here, capillary electrophoresis enabled the identification of the variant and a molecular study was used to establish an accurate diagnosis.

Effectiveness of 12 week ledipasvir/sofosbuvir and predictors of treatment failure in patients with hepatitis C.

OBJECTIVE: The efficacy of ledipasvir/sofosbuvir (LDV/SOF) have been demonstrated in randomized controlled trials, however,there is an unmet need for real-world effectiveness data. It is important to gather data regarding potential predictors of treatment failure with (LDV/SOF). Predictors of sustained virologic response (SVR) to all-oral HCV regimens can inform nuanced treatment decisions. The objectives of this study were to evaluate the effectiveness of LDV/SOF, SVR12 as main endpoint and SVR24 as second endpoint, and identify predictors of treatment failure. METHODS: Retrospective and observational study carried out from April 2015 to January 2016. Inclusion criteria: patients with HCV infection treated with LDV/SOF for 12 weeks during study period. The patients that were treated during 24 weeks were excluded as well as those treated with peg-interferon. Binary logistic regression was used to predict what variable was associated with treatment failure. RESULTS: A total of 122 patients were analyzed achieving SVR12 91.80% (112/122) of them. The patients with HCV genotype (GT) 1a or GT1b or GT4 achieved SVR12. Only one pre-treated non-cirrhotic HCV GT1 patients relapsed to treatment. The lowest SVR12 were obtained for GT3, 43.75%, (7/16). Everybody that got SVR12 achieved SVR24. None of the variables analyzed significantly influenced the SVR12, except GT (p=0.001). Almost all the relapses occurred in GT3. CONCLUSIONS: LDV/SOF combination has been very effective to treat GT1 and GT4 infected patients, however, has constituted a suboptimal therapeutic option for those patients infected with GT3, regardless of the rest of the variables analyzed.

Microwave and ultrasound pre-treatments to enhance anthocyanins extraction from different wine lees.

Wine lees are rich in anthocyanins (AC), natural colorants with health promoting properties. The extraction kinetics of AC from different wine lees in conventional solid-liquid extraction were studied for the first time. The influence of parameters such as temperature, solid-liquid ratio (RS-L) and type of solvent (hydro-alcoholic mixtures) was also studied. Furthermore, microwaves (MW) and ultrasounds (US) were used as pre-treatments (a prior step to the conventional extraction) in order to increase AC yield. Maximum extraction yield (2.78 mgMALVIDIN-EQUIVALENTS/gDRY-LEES) was achieved after 15 min at 25 °C, with a RS-L of 1/10 (g/mL) and with a 50%vol. ethanol mixture. When MW were used AC extraction yield was doubled (6.20 mgMALVIDIN-EQUIVALENTS/gDRY-LEES) and the required time to achieve a constant yield was reduced (from 15 min to 90 s). Meanwhile, US only shortened extraction time in less proportion (from 15 to 5 min). Putative identification of main extract compounds was performed by LC/MS-MS.

Hollow organosilica beads as reference particles for optical detection of extracellular vesicles.

Essentials Standardization of extracellular vesicle (EV) measurements by flow cytometry needs improvement. Hollow organosilica beads were prepared, characterized, and tested as reference particles. Light scattering properties of hollow beads resemble that of platelet-derived EVs. Hollow beads are ideal reference particles to standardize scatter flow cytometry research on EVs. SUMMARY: Background The concentration of extracellular vesicles (EVs) in body fluids is a promising biomarker for disease, and flow cytometry remains the clinically most applicable method to identify the cellular origin of single EVs in suspension. To compare concentration measurements of EVs between flow cytometers, solid polystyrene reference beads and EVs were distributed in the first ISTH-organized interlaboratory comparison studies. The beads were used to set size gates based on light scatter, and the concentration of EVs was measured within the size gates. However, polystyrene beads lead to false size determination of EVs, owing to the mismatch in refractive index between beads and EVs. Moreover, polystyrene beads gate different EV sizes on different flow cytometers. Objective To prepare, characterize and test hollow organosilica beads (HOBs) as reference beads to set EV size gates in flow cytometry investigations. Methods HOBs were prepared with a hard template sol-gel method, and extensively characterized for morphology, size, and colloidal stability. The applicability of HOBs as reference particles was investigated by flow cytometry with HOBs and platelet-derived EVs. Results HOBs proved to be monodisperse with a homogeneous shell thickness. Two-angle light-scattering measurements by flow cytometry confirmed that HOBs have light-scattering properties similar to those of platelet-derived EVs. Conclusions Because the structure and light-scattering properties HOBs resemble those of EVs, HOBs with a given size will gate EVs of the same size. Therefore, HOBs are ideal reference beads with which to standardize optical measurements of the EV concentration within a predefined size range.

[Appropriateness of antimicrobial prescriptions in the emergency department of a tertiary hospital]. / Adecuación de las prescripciones antimicrobianas realizadas en el área de urgencias de un hospital de tercer nivel.

OBJECTIVE: Antibiotics are widely prescribed in the Emergency Department (ED), representing 26-62% of outpatient antibiotic prescriptions. Around 40% of antibiotic prescriptions in hospitalized patients are inappropriate or unnecessary. The aim of the study was to assess the appropriateness of antibiotic prescriptions according to local empirical antibiotic treatment guidelines, in the ED of a tertiary hospital. METHODS: Observational, retrospective study including patients attending the ED in November 2016, with an antibiotic prescription, excluding those from residents. RESULTS: A total of 676 patients were included, 57.1% women, mean age 47.4 ± 21.2 years. Patient's diagnoses were 27.2% urinary tract infections (UTI), 24.1% lower respiratory tract infections, 15.4% skin and soft tissue infections (SSTI), 13.8% upper respiratory tract infections, 11.8% oral infections, 2.7% genital/sexually transmitted infections, 1.6% gastrointestinal infections, 0.3% ocular infections and 3.1% other. The most prescribed antibiotic families were: 44.1% penicillins, 21.3% fluoroquinolones. The most prescribed antibiotics were: fosfomycin trometamol in UTI (32.1%), levofloxacin in lower respiratory tract (46.2%) and amoxicillin/clavulanate in oral infections (71.6%), SSTI (62.5%) and upper respiratory tract (46.6%). In 56.8% (384) of the prescriptions antibiotics were indicated. An appropriated antibiotic was selected in 62% (238) of the prescriptions. Appropriated dosage and duration were selected in 82.8% (197) and 45.4% (108) of the prescriptions, respectively. CONCLUSIONS: Appropriateness of antibiotic prescriptions was low, mainly due to an overuse of antibiotics when not indicated, broad spectrum and incorrect treatment duration. These data reinforce the need to enhance adherence to local empirical antibiotic treatment guidelines by developing an antimicrobial stewardship program in the ED.

Direct-acting antiviral agents in patients with hepatitis C genotype 1-4 infections in a tertiary hospital.

OBJECTIVE: Hepatitis C virus (HCV) infection is a major cause of chronic liver disease. Six different genotypes (GT) of HCV (genotypes 1-6) have been identified. The genotype is clinically relevant since the majority of current direct antiviral agents (DAA´s) do not have pangenotypic efficacy. The purpose of this study was to describe the clinical characteristics of real world patients and evaluate the effectiveness of different treatment regimens. METHODS: Retrospective and observational study carried out in a third level hospital. Study period: January 2015-January 2016. Inclusion criteria: HCV patients of any genotype treated with either DAAs ± rivabirin (RBV) or DAAs + RBV + pegilated interferon (Peg-IFN) regimens for 12 weeks. Exclusion criteria: patients without adequate clinical or analytical information available for further analysis. Patients treated for 24 weeks were excluded. The main endpoint was sustained virologic response 12 weeks after the end of treatment (SVR12), and secondary endpoint was SVR24. RESULTS: A total of 515 patients were included (aged 55.52±8.97 years). GT1: patients treated with simeprevir + sofosbuvir (SIM + SOF), ledipavir (LDV)/SOF and paritaprevir/ritonavir/ombitasvir + dasabuvir (PTV/r/OBV + DSV) ± RBV had a SVR12 of 93.59% (190/203), 98.82% (N=84/85), 94.28% (66/70), respectively. Regarding daclatasvir (DCV) + SOF and SIM + DCV, everybody (19/19) and 87.5% (7/8) got SVR12, respectively. GT2: 71.42% (N=10/14) of patients achieved SVR12, concretely, SOF + RBV had a SVR12 75% (N=6/8). GT3: 43.75% (N=7/16), 90% (N=9/10) and 95% (N=19/20) of patients treated with LDV/SOF, LDV/SOF + RBV and SOF + DCV obtained SVR12, respectively. GT4: patients treated with LDV/SOF, SIM + SOF and PTV/r/OBV ± RBV had a SVR12 rate of 100% (21/21), 91.67% (22/24) and 92% (23/25), respectively. All patients that got SVR12 achieved SVR24. CONCLUSIONS: Our study confirmed the efficacy data reported in clinical trials in a cohort of patients with GT1-4 and a wide range of basal characteristics.

Phenolic characterization of aging wine lees: Correlation with antioxidant activities.

Aging wine lees are water-wastes produced during the wine aging inside wood barrels that can be considered as alternative sources of bioactive compounds. Phenolic characterization and antioxidant activity (AA) measurements of wines lees solid-liquid extracts have been undertaken on a dry extract (DE) basis. Solvents with different polarities (water, methanol, ethanol, two hydroalcoholic mixtures and acetone) were used. Total phenolic (TPC) and total flavonoid contents (TFC) were determined. The mixture of 75:25(v/v) EtOH:H2O showed the highest values with 254 mgGAE/gDE and 146 mgCATE/gDE respectively. HORAC, HOSC and FRAP were used to determine the AA of the extracts being also highest for the mixture of 75:25(v/v) EtOH:H2O (4690 µmolCAE/gDE, 4527 µmolTE/gDE and 2197 µmolTE/gDE, respectively). For ORAC method, methanol extract showed the best value with 2771 µmolTE/gDE. Correlations between TPC, TFC, phenolic compounds and AA were determined. Most relevant compounds contributing to AA were identified using data from mass spectrometry, being mainly anthocyanins.