Application of magnetic resonance imaging (MRI) technology in the characterization of microstructure and moisture content of young Moso bamboo.

Bamboo nodes play a key role in the hollow structure and the rapid growth of bamboo culm. Studying on the anatomical structure of bamboo is helpful to understand its growth mechanism. Taking the noninvasive, high-resolution and accurate technical advantages of magnetic resonance imaging (MRI), we conducted cross-sectional high-resolution MRI scanning on the tip of young Moso bamboo culm (removed shoot sheath) and extracted the gray value of the MRIs by using MATLAB software to explore the differences of water distribution in nodes, proximal nodes, and internodes. The results showed that numerous vascular bundles were repeatedly twisted and rotated horizontally at the nodal diaphragms and inner wall near the nodal diaphragms of the young bamboo, forming an intricate and highly connected network. The structure protected important tissues from mechanical stress by allocating axial loads, and enabled to laterally transport water and nutrients, which was an important basis for the rapid growth of Moso bamboo in relatively short term. The signal value (also known as brightness value) of MRIs indicated that water content of vascular bundles in young bamboo culm was much higher than that of surrounding parenchyma tissues. The mean value and standard deviation of water content between pixels of internodes were significantly higher than that of nodes, and the values of that in the proximal nodes were intermediate. The development of MRI would play a significant role in the studies of bamboo anatomy, physiology, and biochemistry.

The complete chloroplast genome sequence of Acidosasa gigantea (Bambusoideae: Arundinarieae): an ornamental bamboo species endemic to China.

We, at first, fully characterized the complete chloroplast genome of the woody bamboo Acidosasa gigantea using genome skimming and focused on comparative analyses among Acidosasa and Indosasa. This newly sequenced chloroplast genome (GenBank NO. MN917206) is a typical circular structure with 139,711 bp in length and comprises of an 83,295 bp large single-copy (LSC) region, a 12,824 bp small single-copy (SSC) region, and a pair of 21,796 bp inverted repeats (IRs). The GC content of A. gigantea is 38.9% and the sequences contained 132 unique genes were successfully annotated, including 39 tRNA genes, 8 rRNA genes, and 85 protein-coding genes. Phylogenetic analysis shows that A. gigantea is highly clustered in the Arundinaria clade (clade VI) of Arundinarieae, a sister of the clade of Acidosasa purpurea and was not clustered on the same branch as Indosasa sinica. Therefore, it is more accurate to classify A. gigantea into Acidosasa.

Internode morphometrics and allometry of Tonkin Cane Pseudosasa amabilis.

Pseudosasa amabilis (McClure) (Poales: Gramineae) is a typical bamboo species naturally distributed in large area of south China and famous for its culm strength. Although bamboos were found to share the same development rule, the detailed internode morphology of bamboo culm was actually not fully expressed. We explored internode morphology of P. amabilis using 11 different physical parameters in different dimensions (1-4). As Taylor's power law (TPL) is generally applicable to describe relationship between mean and variance of population density, here we used TPL to evaluate the differences between internodes, and further, the relationship between dimension and TPL. Results showed that length (L), hollow radius (HR), hollow area (HA), hollow cylinder volume (HCV), total cylinder volume (TCV), density (De), and weight (W) all presented positive skewed distribution in varying degrees. For the basic one-dimensional parameters, the 9th internode was the longest, the 7th the heaviest, while thickness (T) decreased with internodes. Diameter (D) decreased in general but with an inconspicuous local mode at the 5-6th internodes, potentially due to the rapid height growth. The longest (9th) internode was the "turning point" for T-D and HR-D relationships. Scatter plot changing trends of W to the one-dimensional parameters after the heaviest (7th) internode were reversed, indicating a deceleration of growth speed. TPL was not holding well in one-dimensional parameters (R2: 0.5413-0.8125), but keep increasing as the parameter's dimension increasing (R2 > 0.92 for two-dimensional, R2 > 0.97 for three-dimensional, and R2 > 0.99 for four-dimensional parameters.), suggesting an emergence mechanism of TPL related to both the physical dimensions of morphological measures and the allometric growth of bamboo. From the physical fundamental level, all existences are the expression of energy distribution in different dimensions, implying a more general rule that energy distribution holds better TPL in higher dimension level.

Determination of Trace Elements in the Melon of Indo-Pacific Humpback Dolphins (Sousa chinensis) with ICP-MS.

The Indo-Pacific humpback dolphins (Sousa chinensis) with long life-span are top predators in marine ecosystem -and they could accumulate heavy metals and persistent organic pollutants in their tissues, while the melon is a unique lipid-rich structure within the cetacean forehead that functions in the transmission of echolocation signals. To explore the baseline levels and the main characteristics of the components, the concentrations of vanadium (V), nickel (Ni), chromium (Cr), manganese (Mn), copper (Cu), arsenic (As), zinc (Zn), mercury (Hg), selenium (Se), cadmium (Cd) and lead (Pb) were determined in the melon of the Indo-Pacific humpback dolphins with inductively coupled plasma mass spectrometry (ICP-MS). The results showed that this method was quite suitable for the determination of trace elements in the melon of Indo-Pacific humpback dolphins with highly accuracy and precision, and the trace elements in melon existed individual differences. The average contents were in the order of Zn>As>Cu>Mn>Se>Hg>Cr>Ni>V>Pb>Cd. It is worth noting that the within (1.158 µg·g-1 ww), non-essential toxic trace element may cause toxic effect on the dolphins. Spearman correlation analysis showed positively significant correlations between As, Cd, Hg and body length, indicating that the concentrations of As, Cd, Hg may increase with age. Moreover, Cr and Ni were positively correlated (p<0.05), a significant negative correlation was observed between Mn and As (p<0.01), indicating that there are certain correlation among elements. In addition, the principal component analysis results showed that V, Mn, Ni, Se, Cu, Hg are the main characteristics of trace elements for melon. This study presents a reliable method for determination of the trace element analysis in cetacean melon, and this is the first study that reports the trance elements in the melon of the Indo-Pacific humpback dolphins in PRE that could provide reasonable and effective information for its conservation work.

Comparison of dwarf bamboos (Indocalamus sp.) leaf parameters to determine relationship between spatial density of plants and total leaf area per plant.

The relationship between spatial density and size of plants is an important topic in plant ecology. The self-thinning rule suggests a -3/2 power between average biomass and density or a -1/2 power between stand yield and density. However, the self-thinning rule based on total leaf area per plant and density of plants has been neglected presumably because of the lack of a method that can accurately estimate the total leaf area per plant. We aimed to find the relationship between spatial density of plants and total leaf area per plant. We also attempted to provide a novel model for accurately describing the leaf shape of bamboos. We proposed a simplified Gielis equation with only two parameters to describe the leaf shape of bamboos one model parameter represented the overall ratio of leaf width to leaf length. Using this method, we compared some leaf parameters (leaf shape, number of leaves per plant, ratio of total leaf weight to aboveground weight per plant, and total leaf area per plant) of four bamboo species of genus Indocalamus Nakai (I. pedalis (Keng) P.C. Keng, I. pumilus Q.H. Dai and C.F. Keng, I. barbatus McClure, and I. victorialis P.C. Keng). We also explored the possible correlation between spatial density and total leaf area per plant using log-linear regression. We found that the simplified Gielis equation fit the leaf shape of four bamboo species very well. Although all these four species belonged to the same genus, there were still significant differences in leaf shape. Significant differences also existed in leaf area per plant, ratio of leaf weight to aboveground weight per plant, and leaf length. In addition, we found that the total leaf area per plant decreased with increased spatial density. Therefore, we directly demonstrated the self-thinning rule to improve light interception.

[Determination of Trace Elements in Marine Cetaceans by ICP-MS and Health Risk Assessment].

The liver, kidney and muscle samples from seven cetaceans were digested by microwave digestion, and trace elements amounts of V, Cd, Cu, Zn, As, Cr, Ni, Mn, Se, Hg and Pb were determined by inductively coupled plasma mass spectrometry (ICP-MS), and the health risk assessment for Zn, Cu, Cd, Hg, Se in the liver was conducted. The results of international lobster hepatopancreas standard (TORT-2) showed acceptable agreement with the certified values, and the relative standard deviation (RSD) of eleven kinds of trace elements were less than 3.54%, showing that the method is suitable for the determination of trace elements in cetaceans. The experimental results indicated that different tissues and organs of the dolphins had different trace elements, presenting the tissue specificity. There is a certain inter-species difference among different dolphins about the bioaccumulation ability of the trace elements. The distribution of trace elements in whales presented a certain regularity: the contents of most elements in liver, kidney were much higher than the contents of muscle tissues, Cu, Mn, Hg, Se, and Zn exhibit the higher concentrations in liver, while Cd was mainly accumulated in kidney. And according to the health risk assessment in liver, the exceeding standardrate of selenium and copper in seven kinds of whales was 100%, suggesting that these whales were suffering the contamination of trace elements. The experimental results is instructive to the study of trace elements in cetaceans, while this is the first report for the concentrations in organs of Striped dolphin, Bottlenose dolphin, Fraser's Dolphin and Risso's dolphin in China, it may provide us valuable data for the conservation of cetaceans.

Synthetic promoters consisting of defined cis-acting elements link multiple signaling pathways to probenazole-inducible system.

Probenazole (3-allyloxy-1,2-benzisothiazole-1,1-dioxide, PBZ), the active component of Oryzemate, could induce systemic acquired resistance (SAR) in plants through the induction of salicylic acid (SA) biosynthesis. As a widely used chemical inducer, PBZ is a good prospect for establishing a new chemical-inducible system. We first designed artificially synthetic promoters with tandem copies of a single type of cis-element (SARE, JERE, GCC, GST1, HSRE, and W-box) that could mediate the expression of the ß-glucuronidase (GUS) reporter gene in plants upon PBZ treatment. Then we combined different types of elements in order to improve inducibility in the PBZ-inducible system. On the other hand, we were surprised to find that the cis-elements, which are responsive to jasmonic acid (JA) and ethylene, also responded to PBZ, implying that SA, JA, and ethylene pathways also would play important roles in PBZ's action. Further analysis demonstrated that PBZ also induced early events of innate immunity via a signaling pathway in which Ca(2+) influx and mitogen-activated protein kinase (MAPK) activity were involved. We constructed synthesized artificial promoters to establish a PBZ chemical-inducible system, and preliminarily explored SA, JA, ethylene, calcium, and MAPK signaling pathways via PBZ-inducible system, which could provide an insight for in-depth study.

Development of polymorphic microsatellite markers for Phyllostachys edulis (Poaceae), an important bamboo species in China.

PREMISE OF THE STUDY: Polymorphic microsatellite markers were developed for Phyllostachys edulis (Poaceae), an ecologically and economically important bamboo species in China, to evaluate the genetic diversity and population genetic structure of P. edulis and other Phyllostachys species. • METHODS AND RESULTS: Twenty microsatellite markers were developed and their polymorphisms were tested on 71 samples from three geographically disparate populations. Each locus exhibited between two and 10 alleles with an average of five alleles. Excluding monomorphic loci, observed and expected heterozygosity ranged from zero to one and from 0.041 to 0.676, respectively. • CONCLUSIONS: These 20 polymorphic microsatellite loci will be useful for studies on the molecular ecology, population genetics, and conservation of P. edulis.

[Several changes of Indocalamus leaf active ingredients contents].

In this paper, the leaves of Indocalamus herklotsii, Indocalamus decorus, and Indocalamus latifolius were collected from Nanjing in different seasons to study the seasonal changes of the total flavonoids, tea polyphenols, and soluble sugar contents in the leaves. There existed significant differences in the test active ingredients contents among the leaves of the three Indocalamus species. The leaf total flavonoids content of the three Indocalamus species in different seasons ranged in 1.7%-2.7%, being the highest for I. herklotsii and I. decorus in spring and for I. latifolius in winter. The leaf tea polyphenols content varied from 5.5% to 7.6%; and the leaf soluble sugar content was 1.0%-8.5%, with the maximum in spring. Within the three months after leaf unfolding, the active ingredients contents in I. herklotsii and I. decorus leaves increased with leaf age. The optimal period for harvesting Indocalamus leaves was from December to next March. Among the three Indocalamus species, I. latifolius had the highest contents of the three active ingredients in leaves, suggesting that I. latifolius had greater potential value in the utilization of its leaf active ingredients than the other two species.

Effect of polymerization degree of calcium polyphosphate on its microstructure and in vitro degradation performance.

Preparation, characterization and in vitro study of a series of calcium polyphosphate (CPP) with different polymerization degree were reported. A series of CPP with different polymerization degree were prepared by controlling calcining time. Average polymerization degree was analyzed by liquid state 31P nuclear magnetic resonance (NMR). The microstructure was observed by scanning electric microscope (SEM). X-ray diffraction (XRD) analysis was used to demonstrate that polymerization degree would not affect the crystal system and space group of CPP. The results showed that polymerization degree increased with the increase of calcining time. Degradation studies were performed during 32 days in physiological saline solution (aqueous solution, 0.9 wt.%NaCl) to assess the effect of polymerization degree on the degradation velocity of the samples. It was also shown that the degradation velocity of CPP (polymerization degree=13) doubles than another two samples (polymerization degree=9,19). The results in the present study may be able to provide some fundamental data for controlling CPP degradation.

New instrument for tribocharge measurement due to single particle impacts.

During particulate solid processing, particle-particle and particle-wall collisions can generate electrostatic charges. This may lead to a variety of problems ranging from fire and explosion hazards to segregation, caking, and blocking. A fundamental understanding of the particle charging in such situations is therefore essential. For this purpose we have developed a new device that can measure charge transfer due to impact between a single particle and a metal plate. The device consists of an impact test system and two sets of Faraday cage and preamplifier for charge measurement. With current amplifiers, high-resolution measurements of particle charges of approximately 1 and 10 fC have been achieved before and after the impact, respectively. The device allows charge measurements of single particles with a size as small as approximately 100 microm impacting on the target at different incident angles with a velocity up to about 80 m/s. Further analyses of the charge transfer as a function of particle initial charge define an equilibrium charge, i.e., an initial charge level prior to impact for which no net charge transfer would occur as a result of impact.

Triboelectrification of pharmaceutical powders by particle impact.

Pharmaceutical powders are very prone to electrostatic charging by colliding and sliding contacts with walls and other particles. In pharmaceutical formulation processes, particle charging is often a nuisance and can cause problems in the manufacture of products, such as affecting powder flow, and reducing fill and dose uniformity. For a fundamental understanding of the powder triboelectrification, it is essential to study charge transfer due to a single contact of a particle with a target plane under well-defined physical, mechanical and electrical conditions. In this study, charge transfer due to a single impact of a particle against a stainless steel target was measured for alpha-lactose monohydrate, aspirin, sugar granules and ethylcellulose. The amount of transferred charge is expressed as a function of impact velocity and impact angle as well as the initial charge. The maximum contact area during impact between a particle and a target plane is estimated by an elastic-plastic deformation model. It is found that the transferred charge is a linear function of the contact area. For a given material, there is an initial particle charge for which no charge transfer occurs due to impact. This is found to be independent of impact velocity and angle, and is hence viewed as a characteristic property, which is related to the contact potential difference and tribo-electric series of the sample powders.

[Study on spectral behavior of trimethoxyphenylflurone with cadmium in microemulsion].

In the present paper, the spectral behavior of cadmium with trimethoxyphenylflurone (TM-PF) in microemulsion was studied. In the buffer medium of borax-NaOH at pH 10.40, cadmium (II) reacts with TM-PF to form a stable 1:2 complex. Its apparent molar absorptivity is 6.10 x 10(4) L x mol(-1) x cm(-1) at 560 nm. Beer's law is obeyed in the range of 0-0.60 microg x mL(-1). The coexistent metal ions can be separated, and cadmium can be enriched by sulfhydryl dextrane gel (SDG), greatly improving the selectivity and sensibility of the system. The method possesses high sensitivity as well as h igh selectivity, and can be used to determine trace amount of cadmium in environmental samples successfully.

Development of a novel approach towards predicting the milling behaviour of pharmaceutical powders.

A novel approach has been developed for evaluating the milling behaviour of pharmaceutical powders based on their material and mechanical properties obtained by single particle impact testing. Milling behaviour of two widely used pharmaceutical excipients, namely microcrystalline cellulose and alpha-lactose monohydrate has been analysed in an oscillatory single ball mill. It is found that the milling behaviour of these two powders can be described by analogy with a first-order rate process except for alphaLM at 18Hz of milling frequency. At the same time, single particle impact testing has been used to infer the material properties that are related to breakage. The milling rate of these powders is found to correlate well with the parameter representing the material properties including the particle size, density, hardness and critical stress intensity factor. This provides the basis for a novel approach towards analyzing the milling behaviour of a material based on a simple and reliable approach.

[Phylogeny of the genus Arundinaria based on nucleotide sequences of nrDNA ITS region].

The sequences of nrDNA regions of 17 species and Phyllostachys edulis (outgroup) sampled, which are of represent and type species for different taxa in the genus Arundinaria,were analyzed by PCR amplification and direct DNA sequencing. The phylogenetic trees generated from maximum parsimony analysis showed that the sampled bamboos were naturally monophletic, appearing that these species of the bamboos belong to the genus Arundinaria. The internal transcribed spacers (ITS) data indicated that the species were divided into two branches, one including A. oleosa, A. hsienchuensis, A. chino, A. amara, A. yixingensis, A. amabilis, A. fortunei, and A. pygmaea, the other including A. graminea, A. fargesii, A. faberi, A. hupehensis, Pseudosasa japonica cv. Tsutsumiana, P. japonica, Brachystachyum densiflorum, A. oedogonata, and A. sulcata. The result also showed that there was close relationship between A. graminea and A. fargesii, Pseudosasa japonica cv. Tsutsumiana and P. japonica, A. sulcata, Brachystachyum densiflorum and A. oedogonata, (99%, 100% and 82% boot-strap support respectively). Moreover, there was very close relationship between A. amabilis and A. hsienchuensis, indicating that A. amabilis belongs to the genus Arundinaria. It was shown in the phylogenetic tree that A. pygmaea and A. fortunei had close relationship, and were a sister branch to the bamboos of Pleioblastus.