An Optimal Integral Controller for Adaptive Optics Systems.

Integral controllers are commonly employed in astronomical adaptive optics. This work presents a novel tuning procedure for integral controllers in adaptive optics systems which relies on information about the measured disturbances. This tuning procedure consists of two main steps. First, it models and identifies measured disturbances as continuous-time-damped oscillators using Whittles´s likelihood and the wavefront sensor output signal. Second, it determines the integral controller gain of the adaptive optics system by minimizing the output variance. The effectiveness of this proposed method is evaluated through theoretical examples and numerical simulations conducted using the Object-Oriented Matlab Adaptive Optics toolbox. The simulation results demonstrate that this approach accurately estimates the disturbance model and can reduce the output variance. Our proposal results in improved performance and better astronomical images even in challenging atmospheric conditions. These findings significantly contribute to adaptive optics system operations in astronomical observatories and establish our procedure as a promising tool for fine-tuning integral controllers in astronomical adaptive optics systems.

Estimation of Soluble Solids for Stone Fruit Varieties Based on Near-Infrared Spectra Using Machine Learning Techniques.

The quality control for fruit maturity inspection is a key issue in fruit packaging and international trade. The quantification of Soluble Solids (SS) in fruits gives a good approximation of the total sugar concentration at the ripe stage, and on the other hand, SS alone or in combination with acidity is highly related to the acceptability of the fruit by consumers. The non-destructive analysis based on Visible (VIS) and Near-Infrared (NIR) spectroscopy has become a popular technique for the assessment of fruit quality. To improve the accuracy of fruit maturity inspection, VIS−NIR spectra models based on machine learning techniques are proposed for the non-destructive evaluation of soluble solids in considering a range of variations associated with varieties of stones fruit species (peach, nectarine, and plum). In this work, we propose a novel approach based on a Convolutional Neural Network (CNN) for the classification of the fruits into species and then a Feedforward Neural Network (FNN) to extract the information of VIS−NIR spectra to estimate the SS content of the fruit associated to several varieties. A classification accuracy of 98.9% was obtained for the CNN classification model and a correlation coefficient of Rc>0.7109 for the SS estimation of the FNN models was obtained. The results reported show the potential of this method for a fast and on-line classification of fruits and estimation of SS concentration.

On the Uncertainty Identification for Linear Dynamic Systems Using Stochastic Embedding Approach with Gaussian Mixture Models.

In control and monitoring of manufacturing processes, it is key to understand model uncertainty in order to achieve the required levels of consistency, quality, and economy, among others. In aerospace applications, models need to be very precise and able to describe the entire dynamics of an aircraft. In addition, the complexity of modern real systems has turned deterministic models impractical, since they cannot adequately represent the behavior of disturbances in sensors and actuators, and tool and machine wear, to name a few. Thus, it is necessary to deal with model uncertainties in the dynamics of the plant by incorporating a stochastic behavior. These uncertainties could also affect the effectiveness of fault diagnosis methodologies used to increment the safety and reliability in real-world systems. Determining suitable dynamic system models of real processes is essential to obtain effective process control strategies and accurate fault detection and diagnosis methodologies that deliver good performance. In this paper, a maximum likelihood estimation algorithm for the uncertainty modeling in linear dynamic systems is developed utilizing a stochastic embedding approach. In this approach, system uncertainties are accounted for as a stochastic error term in a transfer function. In this paper, we model the error-model probability density function as a finite Gaussian mixture model. For the estimation of the nominal model and the probability density function of the parameters of the error-model, we develop an iterative algorithm based on the Expectation-Maximization algorithm using the data from independent experiments. The benefits of our proposal are illustrated via numerical simulations.

Disturbance Modelling for Minimum Variance Control in Adaptive Optics Systems Using Wavefront Sensor Sampled-Data.

Modern large telescopes are built based on the effectiveness of adaptive optics systems in mitigating the detrimental effects of wavefront distortions on astronomical images. In astronomical adaptive optics systems, the main sources of wavefront distortions are atmospheric turbulence and mechanical vibrations that are induced by the wind or the instrumentation systems, such as fans and cooling pumps. The mitigation of wavefront distortions is typically attained via a control law that is based on an adequate and accurate model. In this paper, we develop a modelling technique based on continuous-time damped-oscillators and on the Whittle's likelihood method to estimate the parameters of disturbance models from wavefront sensor time-domain sampled-data. On the other hand, when the model is not accurate, the performance of the minimum variance controller is affected. We show that our modelling and identification techniques not only allow for more accurate estimates, but also for better minimum variance control performance. We illustrate the benefits of our proposal via numerical simulations.

A data augmentation approach for a class of statistical inference problems.

We present an algorithm for a class of statistical inference problems. The main idea is to reformulate the inference problem as an optimization procedure, based on the generation of surrogate (auxiliary) functions. This approach is motivated by the MM algorithm, combined with the systematic and iterative structure of the Expectation-Maximization algorithm. The resulting algorithm can deal with hidden variables in Maximum Likelihood and Maximum a Posteriori estimation problems, Instrumental Variables, Regularized Optimization and Constrained Optimization problems. The advantage of the proposed algorithm is to provide a systematic procedure to build surrogate functions for a class of problems where hidden variables are usually involved. Numerical examples show the benefits of the proposed approach.

Minimum variance control for mitigation of vibrations in adaptive optics systems.

In this paper, we address the design of a minimum variance controller (MVC) for the mitigation of vibrations in modern telescope adaptive optics (AO) systems. It is widely accepted that a main source of non-turbulent perturbations is the mechanical resonance induced by the wind or the instrumentation systems, such as fans and cooling pumps. To adequately mitigate vibrations, the application of frequency-based controllers has been considered in the past decade. In this work, we express the system model in terms of the tracking of a zero-input signal via the MVC. We show that the MVC is an equivalent representation of the linear quadratic Gaussian (LQG) controller for the AO system. We also show that by developing the MVC, we can obtain different expressions, in terms of transfer functions, that offer insights into the behavior and expected performance of the controller in the frequency domain. In addition, we analyze the impact of the accuracy of the system and perturbations model on the mitigation of vibrations.

Beam shaping for laser-based adaptive optics in astronomy.

The availability and performance of laser-based adaptive optics (AO) systems are strongly dependent on the power and quality of the laser beam before being projected to the sky. Frequent and time-consuming alignment procedures are usually required in the laser systems with free-space optics to optimize the beam. Despite these procedures, significant distortions of the laser beam have been observed during the first two years of operation of the Gemini South multi-conjugate adaptive optics system (GeMS). A beam shaping concept with two deformable mirrors is investigated in order to provide automated optimization of the laser quality for astronomical AO. This study aims at demonstrating the correction of quasi-static aberrations of the laser, in both amplitude and phase, testing a prototype of this two-deformable mirror concept on GeMS. The paper presents the results of the preparatory study before the experimental phase. An algorithm to control amplitude and phase correction, based on phase retrieval techniques, is presented with a novel unwrapping method. Its performance is assessed via numerical simulations, using aberrations measured at GeMS as reference. The results predict effective amplitude and phase correction of the laser distortions with about 120 actuators per mirror and a separation of 1.4 m between the mirrors. The spot size is estimated to be reduced by up to 15% thanks to the correction. In terms of AO noise level, this has the same benefit as increasing the photon flux by 40%.