The wingspan suspension approach: A modified semilunar technique for multiple areas of recession.

BACKGROUND: Gingival recession can be considered an undesirable condition that results in the exposure of the root surface. There are many techniques that can be employed to address gingival recession; however, they frequently involve a second surgical site. Other approaches have been introduced in the past to address this concern, and this case study discusses the use of a modified technique to achieve root coverage. METHODS: A patient presented to the periodontics clinic with concerns regarding gingival recession. A modification to the semilunar technique was employed to address the recession, whereas double sling sutures were utilized to maintain the coronal repositioning of the flap. RESULTS: Maxillary central incisors initially presented with 2-3 mm of facial recession and root coverage was achieved by use of a modified surgical semilunar approach. No rebound noted over a 6-month period, newly established gingival margin deemed clinically stable. CONCLUSIONS: This case study provides an alternative to addressing gingival recession in the maxillary anterior region, when <3 mm of recession is noted. Avoidance of a second surgical procedure and/or donor site is of particular benefit, as well as maintenance of the blood supply. KEY POINTS: Why is this case new information? There is insufficient evidence on the use of a modified wingspan incision design Phenotype modification with elimination of a second surgical site is most ideal for the patient. What are the keys to successful management of this case? Comprehensive diagnosis and proper case selection Meticulous flap management and adequate release to allow for repositioning without tension Appropriate use ofsuture and suturing technique. What are the primary limitations to success in this case? Thin periodontal phenotype Poor oral hygiene and plaque accumulation postoperatively Loss to follow-up.

Semi-customized three-dimensional ultra-fine titanium meshes in guided bone regeneration for implant therapy in severe alveolar bone defect: a case report.

This case report provides a detailed description of a simple and fast bone regeneration procedure using a semi-customized three-dimensional ultra-fine titanium mesh. A 50-year-old male with a severe vertical and horizontal bone defect in the anterior mandible underwent implant treatment in a staged approach. The autologous bone was combined with a xenograft, and the mixture was grafted to augment the bone defect and covered with semi-customized ultra-fine titanium meshes, which were selected among its various types according to size and configuration of the bone defect, directly connected and immobilized on the tenting screws with minimal shaping. In a postoperative 6 months re-entry surgery, the performed titanium meshes were removed, implants were placed, and a bone core biopsy was obtained that demonstrated satisfactory new bone formation. Finally, two months later, the definitive prosthesis was installed. This semi-customized ultra-fine titanium mesh could help an implant clinician obtain more predictable results in the guided bone regeneration (GBR).

A novel investigational preclinical model to assess fluence rate for dental oral craniofacial tissues.

OBJECTIVE: Photodynamic Therapy (PDT) and Photobiomodulation (PBM) are recognized for their potential in treating head and neck conditions. The heterogeneity of human tissue optical properties presents a challenge for effective dosimetry. The porcine mandible cadaver serves as an excellent model and has several similarities to human tissues of the dental oral craniofacial complex. This study aims to validate a novel modeling system that will help refine PDT and PBM dosimetry for the head and neck region. METHODS AND MATERIALS: Light transmission was analyzed through several tissue combinations at distances of 2 mm to 10 mm. Maximum light fluence rates (mW/cm2) were compared across tissue types to reveal the effects of tissue heterogeneity. RESULTS: The study revealed that light fluence is affected by tissue composition, with dentin/enamel showing reduced transmission and soft tissue regions exhibiting elevated values. The porcine model has proven to be efficient in mimicking human tissue responses to light, enabling the potential to optimize future protocols. CONCLUSION: The porcine mandible cadaver is a novel model to understand the complex interactions between light and tissue. This study provides a foundation for future investigations into dosimetry optimization for PDT and PBM.

Three-dimensional printing of the human lung pleural cavity model for PDT malignant mesothelioma.

OBJECTIVE: The primary aim was to investigate emerging 3D printing and optical acquisition technologies to refine and enhance photodynamic therapy (PDT) dosimetry in the management of malignant pleural mesothelioma (MPM). MATERIALS AND METHODS: A rigorous digital reconstruction of the pleural lung cavity was conducted utilizing 3D printing and optical scanning methodologies. These reconstructions were systematically assessed against CT-derived data to ascertain their accuracy in representing critical anatomic features and post-resection topographical variations. RESULTS: The resulting reconstructions excelled in their anatomical precision, proving instrumental translation for precise dosimetry calculations for PDT. Validation against CT data confirmed the utility of these models not only for enhancing therapeutic planning but also as critical tools for educational and calibration purposes. CONCLUSION: The research outlined a successful protocol for the precise calculation of light distribution within the complex environment of the pleural cavity, marking a substantive advance in the application of PDT for MPM. This work holds significant promise for individualizing patient care, minimizing collateral radiation exposure, and improving the overall efficiency of MPM treatments.

Maintaining tooth-implant distance following root amputation of a compromised adjacent tooth: A clinical case report.

BACKGROUND: Edentulous sites with limited horizontal tooth-implant distance pose a challenge to clinicians. This case report describes root amputation of an adjacent compromised molar to maintain an optimal tooth-implant distance METHODS AND RESULTS: A 41-year-old female was referred for extraction and implant placement to replace her left, maxillary second premolar (#13), which had been diagnosed with a vertical root fracture. Extraction and ridge preservation of #13 was completed without complication. The 4-month postsurgical clinical examination revealed a narrow mesial-distal distance (5.69 mm) of the edentulous space (#13), which was influenced by the degree of divergence of the mesial buccal root of tooth #14. Cone-beam computed tomography (CBCT) analysis verified a periapical lesion on the mesial-buccal root of tooth #14. The amputation of the endodontically compromised mesial-buccal root of #14 was treatment planned to provide space and facilitate placement of a standard diameter implant without compromising the implant or adjacent teeth. Crestal bone levels were verified and maintained at the 1 year postoperative follow-up. CONCLUSION: The findings of the case report demonstrate how root amputation of a compromised molar is an alternative solution for managing spatial limitations in contemporary implant dentistry. More studies are required to assess the reliability and long-term success of this approach. KEY POINTS: Why is this case new information? There is insufficient evidence on the long-term efficacy of narrow-diameter implants. Clinical treatment guidelines are not sufficiently available. This paper presents an alternative approach to managing a specific scenario where mesial-distance distance is limited using root amputation of an adjacent compromised tooth. What are the keys to successful management of this case? Comprehensive diagnosis and stringent case selection Multidisciplinary treatment planning Evidence-based decision making What are the primary limitations to success in this case? Very specific clinical application; adjacent compromised tooth Long-term follow up is required.

Risk factors associated with the survival of endodontically treated teeth: A retrospective chart review.

BACKGROUND: Studies on risk factors affecting tooth retention after endodontic treatment in dental school settings are limited. Understanding these factors is crucial for preserving teeth. The aim of this retrospective study was to evaluate patient- and tooth-level risk factors associated with the survival of endodontically treated teeth. METHODS: Electronic health records of patients who underwent endodontic treatment at the School of Dental Medicine at the University of Pennsylvania from 2017 through 2020 were analyzed. Patient-level factors included age, sex, American Society of Anesthesiologists Physical Status Classification, smoking history, diabetes status, and amoxicillin allergy. Tooth-level factors included position, presence of restorations, and periodontal conditions with preprosthetic treatments. RESULTS: The results of this study indicate that the patient-level factors significantly associated with tooth retention included age, sex, American Society of Anesthesiologists Physical Classification Status, and amoxicillin allergy. Tooth-level factors such as core buildup, full-coverage crown, healthy periodontium, and scaling and root planing were also associated with higher survival rates. Mandibular premolars had higher survival rates than mandibular molars. CONCLUSIONS: This investigation revealed that the tooth retention rate of endodontically treated teeth was 96.2% after initial root canal treatment, 92.4% for nonsurgical re-treatment, and 97.8% for surgical re-treatment. PRACTICAL IMPLICATIONS: The tooth retention of the endodontic treatment was associated with healthy periodontium, tooth structure, tooth position, tooth restoration, and the patient's overall health.

Facially Driven Digital Workflow for Maxillary and Mandibular Milled Implant- Retained Overdentures Using Two Different Unsplinted Attachment Systems: Case Report.

Unsplinted attachment systems for implant overdentures offer various benefits for edentulous patients, including cost-effectiveness, enhanced cleansability, and less need for manual dexterity. This article describes a facially driven digital workflow for fabricating a maxillary implant overdenture retained by conometric-style attachments (Atlantis® Conus) with a palateless design opposing an implant overdenture retained by standard attachments (LOCATOR®). This procedure provides a predictable and accurate technique to digitally scan the master casts with wax rims for articulation and to guide the digital teeth design set-up for a predictable esthetic outcome. The removable prosthesis workflow involves virtual teeth set-up, a 3D-printed trial denture, a milled definitive prosthesis, and intraoral pick-up for both unsplinted attachment systems. The clinical and laboratory steps are described.

Laser-Assisted Minimally Invasive Nonsurgical Therapy in Treating Severely Periodontally Compromised Teeth: A Case Series.

Minimally invasive nonsurgical treatment (MINST) aims to remove an etiology with minimal damage to the healthy periodontium and provide the ideal healing environment. This case series introduces the novel protocol of laser-assisted MINST (LAMINST), combining minimally invasive surgery with a dental laser. A total of 25 patients (32 teeth) with advanced periodontal disease were enrolled and received periodontal treatment by following the LAMINST protocol. Probing depth (PD), recession, clinical attachment level (CAL), bleeding on probing (BOP), plaque presence, and site mobility were evaluated preoperatively and at 6 months. Based on the periodontal evaluations, all cases were diagnosed as stage III grade C periodontitis. Six months after LAMINST, the average PD reduction was 4.44 mm and CAL improved by 4.38 mm. Baseline mobility scores of 1 (6 teeth), 2 (9 teeth), and 3 (3 teeth) decreased to 1 (5 teeth) or 0 (13 teeth). The initial prognoses of 5 (hopeless; 15 teeth), 4 (questionable; 13 teeth), and 3 (poor; 4 teeth), improved to 4 (5 teeth), 3 (12 teeth), 2 (fair; 13 teeth), and 1 (good; 2 teeth). The number of BOP sites reduced from 179 to 12, and the number of plaque sites reduced from 173 to 9. All clinical parameters were improved after LAMINST. The application of LAMINST may overcome the traditional limitations of nonsurgical treatment, such as poor accessibility.

A Periodontal Perspective on the Successful Treatment of Recurrent Benign Gingival Lesions Affecting the Anterior Dentition: Two Case Reports.

Recurrent benign gingival lesions occurring in the anterior dentition are clinical dilemmas. While complete removal of such lesions is required to prevent recurrence, this can result in a poor esthetic outcome. Relative to this conundrum, this report discusses the diagnosis, psychologic management, and clinical treatment of two patients with recurring lesions on the facial gingiva of the mandibular and maxillary incisors, respectively. Patient A, a 55-year-old woman, presented with a recurrent peripheral ossifying fibroma (POF); Patient B, a 76-year-old man, presented with a recurrent pyogenic granuloma (PG). Both patients underwent multiple procedures and were ultimately treated without lesion recurrence. The efficacious surgical treatment of recurrent gingival lesions like POF and PG requires an aggressive approach involving lesion removal of the lesion as well as a 1.0- to 2.0-mm margin of normal tissue, underlying alveolar bone, and associated periodontal ligament (PDL). The rationale for this approach stresses the potential periodontal and esthetic ramifications that were considered. In summary, when recurrent benign gingival lesions are localized to the anterior part of the mouth, the approach to their surgical removal should be modified to minimize the extent of gingival recession and other potential esthetic issues.

Reliability of Cone Beam Computed Tomography in Predicting Implant Treatment Outcomes in Edentulous Patients.

Since the development of CBCT has been utilized in dentistry, the images of the CBCT can assist the surgeon to evaluate the anatomy carefully. Despite the value of radiology evaluation, implant procedures may require additional consideration rather than only evaluating the anatomical factors. The purpose of this study is to evaluate the predictability of using CBCT alone to plan for implant placement in edentulous patients digitally. CBCT images were analyzed by clinicians, measuring the maxillary and mandibular ridge heights and widths digitally of four predetermined implant sites in the maxillary and two selected implant sites in the mandibular arches of 91 patients planning for implant-supported overdenture. A total of 47 patients out of the 91 had completed implant placement on the edentulous ridge, contributing to 55 upper and/or lower arches (136 dental implants). Both predictabilities are low, implying that CBCT planning for implant placement on the edentulous ridge is not a good index and is insufficient to predict the surgical procedures as a solo method. The findings of this study indicate that digital planning by CBCT is insufficient to serve as an individual tool to predict implant procedures. Further information and evaluation must be considered for implant placement in the edentulous ridge.

Ceramic Dental Implants: A Systematic Review and Meta-analysis.

Purpose: To evaluate the performance of one- and two-piece ceramic implants regarding implant survival and success and patient satisfaction. Materials and Methods: This review followed the PRISMA 2020 guidelines using PICO format and analyzed clinical studies of partially or completely edentulous patients. The electronic search was conducted in PubMed/MEDLINE using Medical Subject Headings (MeSH) keywords related to dental zirconia ceramic implants, and 1,029 records were received for detailed screening. The data obtained from the literature were analyzed by single-arm, weighted meta-analyses using a random-effects model. Forest plots were used to synthesize pooled means and 95% CI for the change in marginal bone level (MBL) for short-term (1 year), mid-term (2 to 5 years), and long-term (over 5 years) follow-up time intervals. Results: Among the 155 included studies, the case reports, review articles, and preclinical studies were analyzed for background information. A meta-analysis was performed for 11 studies for one-piece implants. The results indicated that the MBL change after 1 year was 0.94 ± 0.11 mm, with a lower bound of 0.72 and an upper bound of 1.16. For the mid term, the MBL was 1.2 ± 0.14 mm with a lower bound of 0.92 and an upper bound of 1.48. For the long term, the MBL change was 1.24 ± 0.16 mm with a lower bound of 0.92 and an upper bound of 1.56. Conclusion: Based on this literature review, one-piece ceramic implants achieve osseointegration similar to titanium implants, with a stable MBL or a slight bone gain after an individual initial design depending on crestal remodeling. The risk of implant fracture is low for current commercially available implants. Immediate loading or temporization of the implants does not interfere with the course of osseointegration. Scientific evidence for two-piece implants is rare.

Validating Homogeneity for a Novel 3-Dimensional Tissue Phantom Modeling System of the Human Maxilla.

Silicon phantom models have been utilized to calculate light fluence in patients being treated with Photodynamic Therapy (PDT). This application can be utilized for other non-ionizing wavelength therapies such as Photobiomodulation (PBM). We have developed a novel protocol to validate homogeneity for 3-dimensional silicon phantom models of the human maxilla. Accurately quantifying the light profiles of human tissue can accommodate for varying optical properties that occur between subjects. More importantly, this can help optimize light fluence dosimetry calculations to achieve intended results. Silicon models of identical composition were fabricated into two different shapes: 1 flat-planar cylindrical shaped model, 2) non-flat planar (3-dimensional) mold of the human maxilla. Fabricating homogenous silicon phantom models continues to be a challenge as micro-bubbles can contaminate the compound during the curing process. Integrating both proprietary CBCT and handheld surface acquisition imaging devices confirmed our results to be within 0.5mm of accuracy. This protocol was specifically used to cross-reference and validate homogeneity at various depths of penetration. These results present the first known successful validation of identical silicon tissue phantoms with a flat-planar surface vs. a non-flat 3D planar surface. This proof-of-concept phantom validation protocol is sensitive to the specific variations of 3-dimensional surfaces and can be applied to a workflow used to capture accurate light fluence calculations in the clinical setting.

PDT Light Fluence Phantom Modeling of the Human Pleural Cavity: A Proof-of-Concept Pre-Clinical Study.

We have developed a novel scanning protocol for a life-sized human phantom model using handheld three-dimensional (3D) surface acquisition devices. This technology will be utilized to develop light fluence modeling of the internal pleural cavity space during Photodynamic Therapy (PDT) of malignant mesothelioma. The external aspect of the chest cavity phantom was prefabricated of a hardened synthetic polymer resembling ordinary human anatomy (pleural cavity space) and the internal aspect remained hollow without any characterizations. Both surfaces were layered with non-reflective adhesive paper to create non-uniformed surface topographies. These surface characteristics were established in randomized X-Y-Z coordinates ranging in dimensions from 1-15mm. This protocol utilized the handheld Occipital Scanner and the MEDIT i700. The Occipital device required a minimum scanner-to-surface distance of 24cm and the MEDIT device 1cm respectively. The external and internal aspects of the phantom model were successfully scanned acquiring digital measurements in actual value and converted into a digital image file. The initial surface rendering was acquired by the Occipital device and applied with proprietary software to guide the MEDIT device to fill voided areas. This protocol is accompanied by a visualization tool that allows for real-time inspection of surface acquisition in 2D and 3D. This scanning protocol can be utilized to scan the pleural cavity for real-time guidance for light fluence modeling during PDT, which will be expanded to ongoing clinical trials.

Photobiomodulation in dental extraction therapy: Postsurgical pain reduction and wound healing.

BACKGROUND: This scoping review and analysis were designed to assess the amount of time spent delivering photobiomodulation (PBM) light therapy after dental extraction to improve postoperative pain and wound healing. TYPES OF STUDIES REVIEWED: The scoping review was performed according to the Cochrane Collaboration and Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria. Publications were specific for human randomized controlled clinical trials, PBM after dental extraction therapy, and related clinical outcomes. Online databases searched included PubMed, Embase, Scopus, and Web of Science. Analyses were conducted to analyze the prescribed intervals of time (seconds) per application of PBM. RESULTS: Of the 632 studies initially identified, 22 studies fulfilled the inclusion criteria. Postoperative pain and PBM were reported in 20 articles for 24 treatment groups, with treatment times ranging from 17 through 900 seconds and wavelengths from 550 through 1,064 nm. Clinical wound healing outcomes were reported in 6 articles for 7 groups with treatment times ranging from 30 through 120 seconds and wavelengths from 660 through 808 nm. PBM therapy was not associated with adverse events. CONCLUSIONS AND PRACTICAL IMPLICATIONS: There is future potential to integrate PBM after dental extraction therapy to improve postoperative pain and clinical wound healing. The amount of time spent delivering PBM will vary by wavelength and the type of device. Further investigation is needed to translate PBM therapy into human clinical care.

Improving Titanium Implant Stability with Photobiomodulation: A Review and Meta-Analysis of Irradiation Parameters.

Objective: This analysis was designed to present a summary of available evidence that will inform practice and guide future research for photobiomodulation (PBM) after titanium implant placement procedures. Materials and methods: A systematic review was performed according to the Cochrane Collaboration and in line with Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) criteria. Two investigators screened the titles and abstracts, and reviewed articles for risk of bias. Online databases searched included PubMed, Embase, Scopus, and Web of Science. Terms were specific to the effects of PBM on dental implant stability. Results: Eight hundred fifty-six studies were identified, and 15 studies fulfilled the inclusion criteria. Light sources included both laser and light emitting diode (LED) devices. Wavelengths ranged from 618 to 1064 nm. The meta-analysis concluded that all 15 published studies were able to safely apply PBM near dental implants without adverse events. Laser and LED wavelengths that reported significant results included 618, 626, 830, 940 (2 × ), and 1064 nm. Conclusions: The use of adjunctive PBM can be safely prescribed after surgical placement of titanium implants. Six groups reported statistical significance for improving implant stability (four laser diode, two LED) in wavelengths ranging from 618 to 1064 nm. The amount of time spent delivering PBM was not a variable that differentiated whether a study reported significant results.

Implants placed in an alveolar ridge with a sloped configuration. A 3-year prospective multicenter study.

AIM: The aim of the present study was to evaluate soft and hard tissue alterations around implants with a modified marginal portion placed in a healed, sloped ridge over 3 years of follow-up. MATERIAL AND METHODS: 65 patients with a single recipient implant site in an alveolar ridge with a lingual-buccal sloped configuration were recruited. Implants with a modified geometry in the marginal portion were installed in such a way that the sloped part of the device was located at the buccal and most apical position of the osteotomy preparation. Crowns were placed 21 weeks after implant placement. Radiologic examinations were performed at implant installation and at 1 and 3 years of follow-up. Bleeding on probing (BoP), probing pocket depth (PPD), and clinical attachment level (CAL; from the crown margin) were recorded at the insertion of the prosthesis and after 1 and 3 years. RESULTS: 57 patients with 57 implant-supported restorations attended the 3 years follow-up examination. The radiographic analysis revealed a mean marginal bone loss of 0.57 mm during the 3 years period. While the average bone loss between 1 and 3 years amounted to 0.30 mm, approximately 50% of the implants showed no bone loss during this period. The results from the clinical examinations showed a CAL gain of 0.11 ± 0.85 mm between baseline and 3 years of follow-up. About 65% of the implants showed no loss of attachment between 1 and 3 years. BoP and PPD ≥5 mm were identified at <10% of implants at the 3 years examination. CONCLUSION: Hard and soft tissues formed around dental implants that were designed to match the morphology of an alveolar ridge with a lingual-buccal sloped configuration remained stable over 3 years.

Evaluation of Long-Term Efficacy of Forced Erupted Teeth for Restorative Purposes: A Clinical Retrospective Study.

This retrospective study evaluated the long-term stability of teeth that were orthodontically treated with forced eruption for restorative purposes. A total of 25 participants with a total of 36 orthodontically extruded teeth were included in the study. The measured clinical parameters included (1) pre- and posttreatment radiographs, (2) activation time, (3) retention time, (4) total treatment time, (5) additional treatment required to restore the teeth, and (6) pre- and postsurgical complications. The results show a 96.0% survival rate for force-erupted teeth, with a 4.0% failure rate due to nonrestorable caries. When more than 1.0 mm of extrusion was completed, there was a statistically significantly higher chance that the tooth required additional surgeries (P < .05). Complications during treatment were higher in clinicians without orthodontic training (43.0%) vs clinicians with orthodontic training (10.0%). Forced eruption for prosthetic treatment and implant site development is a viable treatment option and is successful in the long-term.

Periodontal and Implant Radiology.

Dental radiography can be used to detect alveolar bone levels around periodontal and peri-implant structures. Periodontal radiographic images can assess alveolar bone height, periodontal ligament, furcation involvement, and evidence of bone destruction. Peri-implant radiographic images can assess the alveolar bone height in relation to the implant structure. As an adjunct to patient care, radiography can aid in the diagnosis of non-health.

A novel digital approach for fixed full-mouth implant-supported rehabilitations: A case report.

Successful rehabilitation of a patient's entire dentition with implant-supported fixed prostheses requires restoration of function, esthetics and comfort. To achieve this goal, the clinician and laboratory technician must work in concert with one another to navigate the multiple steps from the patient's initial evaluation to delivery of the final prostheses. Key to this is the ability of the clinician to provide the technician with detailed information regarding the patient's extra- and intraoral characteristics in a manner that can be easily and accurately transferred to the lab bench where it then serves as the foundation for reconstruction of the dentition. In recent years, the impressive evolution of digital technology in dentistry has dramatically facilitated this complex process. The aim of this case report is to illustrate how digital profiles of a patient's facial and intraoral features can be merged with one another and used to generate artificial teeth and gingival tissue of a full mouth implant supported rehabilitation via computer-aided design and computer-aided manufacturing (CAD/CAM) technology to successfully rehabilitate a patient that initially presented with a terminal dentition. Key words:Facial scan, Zirconia, Implant-supported rehabilitation, Implant-supported prosthesis, Fixed prosthesis, Oral rehabilitation.

Healed Edentulous Sites: Suitability for Dental Implant Placement, Need for Secondary Procedures, and Contemporary Implant Designs.

PURPOSE: The purpose of this retrospective computed tomography study was to evaluate bone availability for dental implant placement, frequency of bone augmentation procedures, frequency of anatomical structures that compromise implant placement, and frequency of implant dimensions, and to determine which edentulous sites would benefit from the use of a sloped implant versus a traditional flat design. MATERIALS AND METHODS: Recorded parameters included the width of the ridge, the buccal and lingual/palatal alveolar bone height in reference to different anatomical landmarks, determination of implant placement, selection of an implant with a flat or sloped top, and need for a secondary bone augmentation procedure. RESULTS: One thousand three hundred seventy edentulous sites were evaluated in 216 patients. Implants could be placed in 60.6% of the total sites, where the coronal portion would be sloped in 59% of sites and conventionally flat in 41%; 39.4% of sites were not adequate for implant placement, where 56.5% needed additional guided bone regeneration procedures and 43.5% required sinus augmentation procedures. The inferior alveolar canal was the most frequent anatomical structure limiting size and/or placement. CONCLUSION: The study indicates that implants can be placed in slightly over half of edentulous sites without a secondary grafting procedure. The possibility of dental implant placement varied according to the volume and morphology of alveolar bone and related anatomical structures. This decreased from anterior to posterior in both arches. The sloped implant design was beneficial. In addition, the sloped implant design resulted in the placement of a longer implant.