Breads formulated with avocado pulp powder as a fat substitute: Quality parameters and in vitro inhibition activities.

The aim of the current study was to evaluate the influence of increasing contents (5%-25%) of avocado pulp powder (APP) produced by foam-mat drying (FMD) as a substitute for hydrogenated vegetable fat in bread on its nutritional composition, physical properties, α-amylase, α-glucosidase, and lipase inhibition, total phenolic content, antioxidant activity, color, structure, and x-ray diffraction patterns. The increase in the APP content decreased the values of lipids, carbohydrates, energy, firmness, and specific volume of breads. The inhibition of lipase activity showed a pronounced increase, while the total phenolic content and antioxidant activity were significantly elevated. The color parameters a* and b* were higher in the breads with added APP. The crystalline structure transitioned from type A to type V with 15% APP incorporation. Taken together, these results suggest that APP has potential to act as a healthier substitute for saturated fats in breads, paving the way to develop creative and innovative solutions for the functionalization of bakery food products.

Maltodextrin as a Drying Adjuvant in the Lyophilization of Tropical Red Fruit Blend.

Guava, pitanga and acerola are known for their vitamin content and high levels of bioactive compounds. Thus, the preparation of combinations of these fruits comprises a blend with high nutraceutical potential, yielding a strong and attractive pigmentation material. In this study, the influence of different proportions of maltodextrin on the lyophilization of a blend of guava, acerola and pitanga was evaluated considering not only the physicochemical, physical and colorimetric parameters but also the bioactive compounds in the obtained powders. The blend was formulated from the mixture and homogenization of the three pulps in a ratio of 1:1:1 (m/m), then maltodextrin was added to the blend, resulting in four formulations: blend without adjuvant (BL0), and the others containing 10% (BL10), 20% (BL20) and 30% (BL30) maltodextrin. The formulations were lyophilized and disintegrated to obtain powders. The powders were characterized in terms of water content, water activity, pH, total titratable acidity, ash, total and reducing sugars, ascorbic acid, total phenolic content, flavonoids, anthocyanins, carotenoids, lycopene, color parameters, Hausner factor, Carr index, angle of repose, solubility, wettability and porosity. All evaluated powders showed high levels of bioactive compounds and the increase in maltodextrin concentration promoted positive effects, such as reductions in water content, water activity and porosity and improved flow, cohesiveness and solubility characteristics.

Foliar Applications of Salicylic Acid on Boosting Salt Stress Tolerance in Sour Passion Fruit in Two Cropping Cycles.

Brazil stands out as the largest producer of sour passion fruit; however, the water available for irrigation is mostly saline, which can limit its cultivation. This study was carried out with the objective of evaluating the effects of salicylic acid in the induction of tolerance in sour passion fruit to salt stress. The assay was conducted in a protected environment, using a completely randomized design in a split-plot scheme, with the levels of electrical conductivity of the irrigation water (0.8, 1.6, 2.4, 3.2, and 4.0 dS m-1) considering the plots and concentrations of salicylic acid (0, 1.2, 2.4, and 3.6 mM) the subplots, with three replications. The physiological indices, production components, and postharvest quality of sour passion fruit were negatively affected by the increase in the electrical conductivity of irrigation water, and the effects of salt stress were intensified in the second cycle. In the first cycle, the foliar application of salicylic acid at concentrations between 1.0 and 1.4 mM partially reduced the harmful effects of salt stress on the relative water content of leaves, electrolyte leakage, gas exchange, and synthesis of photosynthetic pigments, in addition to promoting an increase in the yield and quality parameters of sour passion fruit.

Tropical Red Fruit Blend Foam Mat Drying: Effect of Combination of Additives and Drying Temperatures.

Foam mat drying is a widely used technique for liquid products because it has a number of advantages; however, for an efficient process, the choice of additives and temperatures is extremely important. The objective of this study was to evaluate the effect of additives and drying temperatures on the powders obtained from the blend of tropical red fruits, such as acerola, guava, and pitanga. The foam formulations were prepared by mixing the pulps of the three fruits in equal proportions (1:1:1), all added with 6% albumin and 1% stabilizing agent: E1, gum Arabic; E2, guar gum; E3, gelatin. The combinations were subjected to beating, and subsequently, they were dried in an oven with forced air circulation at four temperatures (50 to 80 °C), with a mat thickness of 0.5 cm. The obtained powders showed low levels of water and water activity and high levels of bioactive compounds, colors with a predominance of yellow, intermediate cohesiveness, poor fluidity, and solubility above 50%. The best temperature for obtaining the powders was 60 °C. The formulation that produced the best results for the production of the tropical red fruit blend powder was the combination of albumin and gelatin.

Smelling Peppers and Pout Submitted to Convective Drying: Mathematical Modeling, Thermodynamic Properties and Proximal Composition.

Pepper (Capsicum spp.) is among the oldest and most cultivated crops on the planet. Its fruits are widely used as natural condiments in the food industry for their color, flavor, and pungency properties. Peppers have abundant production; on the other hand, their fruits are perishable, deteriorating within a few days after harvesting. Therefore, they need adequate conservation methods to increase their useful life. This study aimed to mathematically model the drying kinetics of smelling peppers (Capsicum chinense) and pout peppers (Capsicum chinense Jacq.) to obtain the thermodynamic properties involved in the process and to determine the influence of drying on the proximal composition of these peppers. Whole peppers, containing the seeds, were dried in an oven with forced air circulation, at temperatures of 50, 60, 70, and 80 °C, with an air speed of 1.0 m/s. Ten models were adjusted to the experimental data, but the Midilli model was the one that provided the best values of coefficient of determination and lowest values of the mean squared deviation and chi-square value in most of the temperatures under study. The effective diffusivities were well represented by an Arrhenius equation, appearing in the order of 10-10 m2·s-1 for both materials under study, since the activation energy of the smelling pepper was 31.01 kJ·mol-1 and was 30.11 kJ·mol-1 in the pout pepper, respectively. Thermodynamic properties in both processes of drying the peppers pointed to a non-spontaneous process, with positive values of enthalpy and Gibbs free energy and negative values of entropy. Regarding the influence of drying on the proximal composition, it was observed that, with the increase in temperature, there was a decrease in the water content and the concentration of macronutrients (lipids, proteins, and carbohydrates), providing an increase in the energy value. The powders obtained in the study were presented as an alternative for the technological and industrial use of peppers, favoring obtaining a new condiment, rich in bioactives, providing the market with a new option of powdered product that can be consumed directly and even adopted by the industry as a raw material in the preparation of mixed seasonings and in the formulation of various food products.

Physicochemical Aspects, Bioactive Compounds, Phenolic Profile and In Vitro Antioxidant Activity of Tropical Red Fruits and Their Blend.

The combination of fruit pulps from different species, in addition to multiplying the offer of flavors, aromas and textures, favors the nutritional spectrum and the diversity of bioactive principles. The objective was to evaluate and compare the physicochemical characteristics, bioactive compounds, profile of phenolic compounds and in vitro antioxidant activity of pulps of three species of tropical red fruits (acerola, guava and pitanga) and of the blend produced from the combination. The pulps showed significant values of bioactive compounds, with emphasis on acerola, which had the highest levels in all parameters, except for lycopene, with the highest content in pitanga pulp. Nineteen phenolic compounds were identified, being phenolic acids, flavanols, anthocyanin and stilbene; of these, eighteen were quantified in acerola, nine in guava, twelve in pitanga and fourteen in the blend. The blend combined positive characteristics conferred by the individual pulps, with low pH favorable for conservation, high levels of total soluble solids and sugars, greater diversity of phenolic compounds and antioxidant activity close to that of acerola pulp. Pearson's correlation between antioxidant activity and ascorbic acid content, total phenolic compounds, flavonoids, anthocyanins and carotenoids for the samples were positive, indicating their use as a source of bioactive compounds.

Use of Inverse Method to Determine Thermophysical Properties of Minimally Processed Carrots during Chilling under Natural Convection.

The aim of this study was to determine the thermophysical properties and process parameters of cylindrical carrot pieces during their chilling. For this, the temperature of the central point of the product, initially at 19.9 °C, was recorded during chilling under natural convection, with the refrigerator air temperature maintained at 3.5 °C. A solver was created for the two-dimensional analytical solution of the heat conduction equation in cylindrical coordinates. This solver and the experimental data set were coupled to the LS Optimizer (V. 7.2) optimization software to simultaneously determine not only the values of thermal diffusivity (α) and heat transfer coefficient (hH), but also the uncertainties of these values. These values were consistent with those reported in the literature for carrots; in this study, the precision of these values and the confidence level of the results (95.4%) were also presented. Furthermore, the Biot numbers were greater than 0.1 and less than 40, indicating that the mathematical model presented in this study can be used to simultaneously estimate α and hH. A simulation of the chilling kinetics using the values obtained for α and hH showed good agreement with the experimental results, with a root mean square error RMSE = 9.651 × 10-3 and a chi-square χ2 = 4.378 × 10-3.

Optimization of Extraction Method of Anthocyanins from Red Cabbage.

Among the vegetables that stand out for their high concentration of anthocyanins, red cabbage appears as one of the most-used sources of these pigments in food production and it is considered a suitable raw material for the extraction of natural dye. Therefore, the objective was to carry out the production of natural extracts from red cabbage, under different conditions, varying the solvent, type of pre-treatment, pH range, and processing temperature during the concentration of the extracts. The anthocyanins were extracted from red cabbage using the following solvents: distilled water, 25% ethyl alcohol, and 70% ethyl alcohol. The raw material was divided into two groups, the first was subjected to a drying pre-treatment at 70 °C for 1 h and for the second group, the extraction was performed with the raw material in natura. Two pH ranges of 4.0 and 6.0 and extraction temperatures of 25 °C and 75 °C were used in the extracts, resulting in 24 formulations. The extracts obtained were analyzed for colorimetric parameters and anthocyanins. The results of anthocyanins show that the methodology that uses 25% alcohol, pH 4.0, and processing temperature of 25 °C produces a reddish extract and better results in the extraction, presenting average values of 191.37 mg/100 g of anthocyanins, being 74% higher compared to the highest values obtained in the other extracts where the same raw material was used and the solvents differed.

Influence of Dehydration Temperature on Obtaining Chia and Okra Powder Mucilage.

Gum and mucilage from seeds and fruits are objects of study because they have characteristics of high viscosity at low concentrations and gelling properties, which are useful characteristics for modifying the texture and stabilizing products in the food industry. Chia and okra have high concentrations of polysaccharide gums in their composition, which makes them an interesting target for use in the composition of foods that require the use of texture enhancers and stabilizers. The present study investigated the influence of dehydration temperature on the characteristics of chia and okra powder mucilage obtained at different temperatures. The mucilages were extracted using an aqueous process and dehydrated in an air circulation oven at 50, 60, and 70 °C until hydroscopic equilibrium. Then, the powdered chia mucilage (CM) and okra mucilage (OM) were analyzed for chemical and physicochemical characteristics, bioactive compounds, antioxidant activity, and physical properties. It was found that powdered mucilage had low water content and water activity, with CM standing out in terms of ash, pectin, and starch content and OM, along with higher averages of proteins, sugars, total phenolic compounds, anthocyanins, flavonoids, and antioxidant activity. As for the physical parameters, CM stood out in relation to greater solubility and lower hygroscopicity, whereas OM presented higher wettability rates. Both powdered mucilages were classified as having good fluidity and cohesiveness from low to intermediate. In relation to the dehydration temperature, the best mucilage properties were verified at 70 °C. The study revealed that mucilages have good functional properties offering great potential as raw material for industry.

The Temperature Influence on Drying Kinetics and Physico-Chemical Properties of Pomegranate Peels and Seeds.

Pomegranate is a fruit desirable for its nutritional and medicinal properties which has a great industrial potential that is yet under-explored. Notable for its integral use, the peels are used in medicinal infusions and the seeds consumed without restrictions. In this sense, the objective of this work is to determine the drying kinetics of pomegranate peels and seeds in a hot air circulation oven, at temperatures of 50, 60, and 70 °C, adjust mathematical models to experimental data, determine the effective diffusivities and thermodynamic properties of the process and the physicochemical characteristics of peels and seeds of fresh pomegranates and in their flours. Twelve models were used to adjust the drying kinetics, obtaining better results with the Diffusion Approximation model, Verma, and modified Henderson and Pabis. The effective diffusivities were well represented by an Arrhenius equation, with activation energies of 31.39 kJ/mol for seeds and 10.60 kJ/mol for peels. In the drying process, the seeds showed higher values of enthalpy, entropy, and Gibbs free energy concerning peels. Pomegranate peel and seed flours have proximal composition and distinct physicochemical characteristics, with high fiber, carbohydrate, and energy content. In addition, peel flours stand out for their mineral content, and seed flours do for their lipid and protein content.

Mathematical Models to Describe the Foam Mat Drying Process of Cumbeba Pulp (Tacinga inamoena) and Product Quality.

The present study investigated the mathematical modeling foam-mat drying kinetics of cumbeba pulp and the effect of drying conditions on the color and contents of ascorbic acid, flavonoids, and phenolic compounds of the powder pulps obtained. Foam-mat drying was carried out in a forced air circulation oven at temperatures of 50, 60, and 70 °C, testing foam-mat thicknesses of 0.5, 1.0, and 1.5 cm. The increase in the water removal rate is a result of the increase in air temperature and the decrease in the thickness of the foam layer. Among the empirical and semi-empirical mathematical models, the Midilli model was the one that best represented the drying curves in all conditions evaluated. Effective water diffusivity ranged from 1.037 × 10-9 to 6.103 × 10-9 m2 s-1, with activation energy of 25.212, 33.397, and 36.609 kJ mol-1 for foam thicknesses of 0.5, 1.0, and 1.5 cm, respectively. Cumbeba powders showed light orangish colors and, as the drying temperature increased from 50 to 70 °C, for all thicknesses, the lightness value (L*) decreased and the values of redness (+a*) and yellowness (+b*) increased. Foam-mat drying at higher temperatures (60 and 70 °C) improved the retention of ascorbic acid and flavonoids, but reduced the content of phenolic compounds, while the increase in thickness, especially for flavonoids and phenolic compounds, caused reduction in their contents. The foam-mat drying method allowed obtaining a good-quality cumbeba pulp powder.

Morphological, biochemical and histological effects of aqueous extracts of peanut (Arachis hypogaea) on swiss mice in different diets.

PURPOSE: To evaluate the morphological, biochemical, and histological effects of aqueous extracts of peanut (skinless and added to 1% skin) in Swiss mice submitted to a high-fat diet. METHODS: Forty male Swiss mice were divided into four groups (n=10 per group): GI) normocaloric diet; GII) high-fat diet; GIII) high-fat diet + 0.5 mL of peanut extract; GIV) high-fat diet + 0.5 mL of peanut extract + 1% peanut skin. The animals were weighed weekly and euthanized after 12 weeks for histopathological and biochemical analyses. The study was approved by the Animal Use Ethics Committee. RESULTS: The animals in the GIV group had higher body weight when compared to the other ones. Increase in total cholesterol in GIII, increase in blood glucose in groups GII, GIII and GIV, decrease in serum low-density lipoprotein (LDL) concentration in groups GI and GIV and increase in serum concentration of C-reactive protein in GII were seen. The presence of vacuolar fat deposits was found in animal livers from GII. CONCLUSIONS: The extracts improved the plasma concentrations of animals that received a high-fat diet, including preventing morphological damage to liver tissue. These benefits were enhanced by the association of peanut shells with the extract.

Opuntia ficus-indica is an excellent eco-friendly biosorbent for the removal of chromium in leather industry effluents.

In Brazil, the leather industry is an important economic segment moving around U$ 3 billions of dollars a year. However, high amounts of water are requested to transform skin animals into leather, causing high wastewater amounts to be consequently produced. A major problem is attached to the presence of chromium in the wastewater from the tanning process. Chromium is a heavy metal potentially toxic both to the environment and to the human health. In order to control the levels of chrome dumped into the environment, Brazilian agencies require the treatment of effluents by the generating source. Thus, this study aimed to develop an alternative method to the removal of chromium in wastewater from the leather industry using the Opuntia ficus-indica biomass as eco-friendly biosorbent. Crude waste samples were collected in a tannery stabilization pond for chromium quantification and further treatments. The powdered Opuntia ficus-indica was obtained from species collected in Pernambuco, Brazil, and its physical parameters and pHPCZ were characterized. Adsorptions studies and acute toxicity were also carried out. The biomass remaining after the sorption was analyzed through scanning electron microscopy and Fourier-transform infrared spectroscopy. The chromium content was above the limit allowed by the Brazilian regulatory agency. In sorption studies, biomass was able to remove 74.8% and 84.88% of Cr (III) using 2.0 g and 4.0 g of biomass, respectively. The surface of biomass is very favorable to biosorption and the chemical bindings among oxygen atoms present in the chemical components of this biomass and the heavy metal was confirmed through infrared spectrum. This study proved that Opuntia ficus-indica is effectively biosorbent to chromium, promising and with low costs for the leather industry, able to reduce its ecotoxicity as proven by chemical and biological assays.

Utilization of Cumbeba (Tacinga inamoena) Residue: Drying Kinetics and Effect of Process Conditions on Antioxidant Bioactive Compounds.

The residue generated from the processing of Tacinga inamoena (cumbeba) fruit pulp represents a large amount of material that is discarded without proper application. Despite that, it is a raw material that is source of ascorbic acid, carotenoids and phenolic compounds, which are valued in nutraceutical diets for allegedly combating free radicals generated in metabolism. This research paper presents a study focused on the mathematical modeling of drying kinetics and the effect of the process on the level of bioactive of cumbeba residue. The experiments of cumbeba residue drying (untreated or whole residue (WR), crushed residue (CR) and residue in the form of foam (FR)) were carried out in a fixed-bed dryer at four air temperatures (50, 60, 70 and 80 °C). Effective water diffusivity (Deff) was determined by the inverse method and its dependence on temperature was described by an Arrhenius-type equation. It was observed that, regardless of the type of pretreatment, the increase in air temperature resulted in higher rate of water removal. The Midilli model showed better simulation of cumbeba residue drying kinetics than the other models tested within the experimental temperature range studied. Effective water diffusivity (Deff) ranged from 6.4890 to 11.1900 × 10-6 m2/s, 2.9285 to 12.754 × 10-9 m2/s and 1.5393 × 10-8 to 12.4270 × 10-6 m2/s with activation energy of 22.3078, 46.7115 and 58.0736 kJ/mol within the temperature range of 50-80 °C obtained for the whole cumbeba, crushed cumbeba and cumbeba residue in the form of foam, respectively. In relation to bioactive compounds, it was observed that for a fixed temperature the whole residue had higher retention of bioactive compounds, especially phenolic compounds, whereas the crushed residue and the residue in the form of foam had intermediate and lower levels, respectively. This study provides evidence that cumbeba residue in its whole form can be used for the recovery of natural antioxidant bioactive compounds, mainly phenolic compounds, with the possibility of application in the food and pharmaceutical industries.

Morphological, biochemical and histological effects of aqueous extracts of peanut (Arachis hypogaea) on swiss mice in different diets

ABSTRACT Purpose: To evaluate the morphological, biochemical, and histological effects of aqueous extracts of peanut (skinless and added to 1% skin) in Swiss mice submitted to a high-fat diet. Methods: Forty male Swiss mice were divided into four groups (n=10 per group): GI) normocaloric diet; GII) high-fat diet; GIII) high-fat diet + 0.5 mL of peanut extract; GIV) high-fat diet + 0.5 mL of peanut extract + 1% peanut skin. The animals were weighed weekly and euthanized after 12 weeks for histopathological and biochemical analyses. The study was approved by the Animal Use Ethics Committee. Results: The animals in the GIV group had higher body weight when compared to the other ones. Increase in total cholesterol in GIII, increase in blood glucose in groups GII, GIII and GIV, decrease in serum low-density lipoprotein (LDL) concentration in groups GI and GIV and increase in serum concentration of C-reactive protein in GII were seen. The presence of vacuolar fat deposits was found in animal livers from GII. Conclusions: The extracts improved the plasma concentrations of animals that received a high-fat diet, including preventing morphological damage to liver tissue. These benefits were enhanced by the association of peanut shells with the extract.

Optimization of the Effects of Different Temperatures and Compositions of Filmogenic Solution on Lactobacillus Salivarius Using Predictive Mathematical Models.

It is well known that intake of probiotic brings health benefits. Lactic bacteria with probiotic potential have aroused the interest of the industry in developing food products that incorporate such benefits. However, incorporating probiotic bacteria into food is a challenge for the industry, given the sensitivity of probiotic cultures to process conditions. Therefore, the objective of this study is to evaluate gelatin- and inulin-based filmogenic solutions as a potential vehicle for incorporating probiotics into food products and to model the fermentation kinetics. L. salivarius (Lactobacillus salivarius) growth in filmogenic solutions was analyzed under the influence of a variety gelatin concentrations (1.0-3.0%) and inulin concentrations (4.0-6.0%) and fermented under the effect of different temperatures (25-45 °C). A full 23 factorial plan with three replicates at the central point was used to optimize the process. The impacts of process conditions on cell development are fundamental to optimize the process and make it applicable by the industry. The present study showed that the optimal conditions for the development of probiotic cells in filmogenic solutions are a combination of 1.0% gelatin with 4.0% inulin and fermentation temperature of 45 °C. It was observed that the maximum cell growth occurred in an estimated time of about 4 h of fermentation. L. salivarius cell production and substrate consumption during the fermentation of the filmogenic solution were well simulated by a model proposed in this article, with coefficients of determination of 0.981 (cell growth) and 0.991 (substrate consumption).

Obtaining anthocyanin from jambolan fruit: Kinetics, extraction rate, and prediction of process time for different agitation frequencies.

In the literature, in general, the kinetics of bioactive compounds extraction from a solid-liquid system is described by diffusion models and by the Peleg model. In this study, four experiments on the kinetics of anthocyanin extraction from jambolan fruit, at different agitation frequencies of the medium (0, 50, 100, and 150 rpm), are described by various empirical models with up to two fit parameters. According to the statistical indicators, the best model to describe the kinetic processes was Page's, which was also used to determine the extraction rates (all decreasing) and estimate the process times for each agitation frequency. The extraction time for the 150 rpm frequency is approximately six times shorter than that for 0 rpm. Thus, the 150 rpm frequency can be recommended for industrial applications, as the process time is an important variable in the production cost.

Caracterização físico-química, microbiológica e sensorial de geleias de umbu-cajá elaboradas com e sem a adição de sacarose / Physical-chemical, microbiological and sensory characterization of jams made from umbu-caja prepared with and without the sucrose addition

Neste trabalho foram desenvolvidas geleias convencionais e dietéticas de umbu-cajá e as características físico-químicas, microbiológicas e sensoriais dos produtos foram avaliadas. No processamento das geleias convencionais foram utilizadas polpa de umbu-cajá, sacarose comercial e pectina de alto teor de metoxilação (ATM). Nas geleias dietéticas, a sacarose e a pectina ATM foram substituídas por aspartame e pectina de baixo teor de metoxilação (BTM). As formulações foram concentradas em tacho aberto até obter o teor de sólidos solúveis totais de ~63 °Brix (produto convencional) e de ~12,5 °Brix (geleia dietética), e então envasilhadas em recipientes de vidro. As geleias foram submetidas a análises microbiológicas e, posteriormente, aos testes de aceitação (cor, aparência, aroma, consistência, sabor, doçura, impressão global), além da intenção de compra. As geleias apresentaram conformidade com os padrões microbiológicos estabelecidos pela legislação.As amostras adicionadas de sacarose obtiveram escores compreendidos entre 7,15 (doçura) e 8,25 (cor).As geleias isentas de sacarose tiveram escores que variaram de 4,93 (doçura) a 7,08 (aroma), e em apenas um atributo sensorial obtiveram nota superior a 7,0. Dentre as geleias avaliadas, as convencionais demonstraram as maiores frequências de aceitação (> 80 %) e intenção de compra (> 75 %), que indicam o potencial destes produtos para futura industrialização e comercialização.

This study aimed at developing the conventional and dietary jams made from umbu-caja, and their physical-chemical, microbiological and sensory characteristics were evaluated. Umbu-caja pulp, commercial sucrose and high methoxylated pectin (HMP) were used for processing the conventional jams. For preparing the dietary jams, the sucrose and pectin HMP were replaced by aspartame and low methoxylation pectin (LMP). The formulations were concentrated in an open pan until achieving the soluble solids content of ~63 oBrix (conventional jam) and of ~12.5 °Brix (dietary formulation), and then they were poured into glass jars. The microbiological assays, the acceptance tests (color, appearance, aroma, consistency, taste, sweetness, overall impression), and the purchase intent were performed for analyzing the processed jams. The both products were within the microbiological standards established by legislation. The sucrose-containing samples presented scores ranging from 7.15 (sweetness) to 8.25 (color). The sucrose-free jams showed scores ranging from 4.93 (sweetness) to 7.08 (aroma), and in only one sensory attribute achieved a score higher than 7.0. The conventional jams showed the highest frequency of acceptance (> 80 %) and in purchase intent (> 75 %), indicating a potential for future industrialization and commercialization.

Influência das variáveis de processo nas características físicas e químicas de geleias de umbu-cajá / Influence of process variables in physical and chemical characteristics of umbu-cajá jellies

A indústria de alimentos busca alternativas para agregar valor econômico e nutricional a produtos relativamente conhecidos como as geleias. Uma alternativa é a utilização de frutos exóticos, a exemplo do umbu-cajá. Objetivou-se com o estudo avaliar os efeitos de diferentes concentrações de açúcar e pectina nas características físicas e químicas de geleias de umbu-cajá. As geleias foram elaboradas com polpa diluída com água na proporção de 6:4. Foi utilizado o planejamento fatorial 22 com 2 experimentos no ponto central, resultando em 6 experimentos com variação das porcentagens de açúcar (50, 55 e 60%) e pectina (0,5; 1,0 e 1,5%). As formulações foram aquecidas e concentradas em tacho aberto até atingir teor de sólidos solúveis totais de aproximadamente 63 °Brix. As geleias apresentaram elevadas porcentagens de rendimento (81,13 a 96,17%), sendo que as amostras formuladas com a 60% de açúcar apresentaram os maiores valores. O açúcar foi o fator que mais influenciou nos parâmetros físicos e químicos analisados, principalmente nos parâmetros de teor de umidade, cinzas, carboidratos, açucares redutores, açucares não redutores, acidez, pH e intensidade de vermelho. Já a pectina apresentou maior efeito nos parâmetros de cor (luminosidade e intensidade de amarelo) e textura (firmeza, adesividade e extrusão). Apenas os modelos ajustados as dados experimentais de rendimento, açucares não redutores, acidez, ratio, intensidade de vermelho e extrusão foram significativos, sendo que, os ajustados aos dados de açucares não redutores e ratio além de serem significativos também foram preditivos revelando os maiores valores de coeficiente de determinação. As geleias de umbu-cajá apresentam-se como uma alternativa para o excedente de produção no pico da safra no nordeste do Brasil, além de ser um produto que apresentara uma composição física, química e nutricional bem variada.

The food industry seeks alternatives to add economic value and nutritional products for the known as jellies. An alternative is to use exotic fruits such as the umbu-cajá. The objective of the study was to evaluate the effects of different concentrations of sugar and pectin in the physical and chemical characteristics of umbu-cajá jellies. The jellies were prepared with pulp diluted with water at a ratio of 6:4. Was utilized factorial planning was used with 22 with 2 experiments at the center point, resulting in 6 experiments with varying percentages of sugar (50, 55 and 60%) and pectin (0.5, 1.0 and 1.5%). The formulations were heated and concentrated in open pan until it reaches total soluble solids content of about 63 °Brix. The jellies showed high percentages of income (from 81.13 to 96.17%), and the samples formulated with 60% sugar had the highest values. Sugar was the factor that most influenced the physical and chemical parameters analyzed mainly on the parameters of moisture content, ash, carbohydrates, reducing sugars, non-reducing sugars, acidity, pH and intensity of red. Already the pectin had more effect on color parameters (luminosity and intensity of yellow) and texture (firmness, adhesiveness and extrusion). Only the experimental data models adjusted to yield, non-reducing sugars, acidity, ratio, intensity for red and extrusion were significant, and the adjusted data for non-reducing sugars and ratio as well as being significant predictors were also revealing the highest values coefficient of determination. The jelly umbucajá present themselves as an alternative to excess production during peak season as well as being a product that presented a physical composition, chemical and nutritional well varied.