[Feasibility of a novel type of complex anterior cervical fixation by using Mimics software].

OBJECTIVE: To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation -- anterior transpedicular screw fixation+zero notch internal fixation. METHODS: From January 2021 to September 2022, 50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning, including 27 males and 23 females, aged from 25 to 65 years old with an average of (46.0 ± 9.0) years old. The dicom format is exported and engraved into the CD, and use the mimics software to perform 3D reconstruction of each segment. A simulated screw is placed on the image according to the critical value of zero notch screw (head and tail angle 44°, internal angle 29°). The position of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation. RESULTS: For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position, with no instances of intersection with ATPS. For the lower zero notch screw, in C3-C4 and C4-C5, 4 out of 50 subjects are in the safe position in the three-dimensional images of cervical vertebrae, and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9) ° and (36.1±2.2) °, respectively. In C5-C6 and C6-C7 segments, no lower zero notch screws intersected with ATPS, and all screws are in safe positions. CONCLUSION: Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.

Measurement of anatomical parameters of anterior transpedicular root screw intervertebral fusion system of cervical spine.

OBJECTIVE: This study aims to investigate the feasibility of the anterior transpedicular root screw (ATPRS) intervertebral fusion system for the cervical spine and provide a basis for the design of the ATPRS intervertebral fusion system. METHODS: A total of 60 healthy adult cervical spine CT images examined from our hospital were selected, including 30 males and 30 females, with an average age of 39.6 ± 4.8 years. The image data was imported into Mimics 21.0 software in DICOM format for 3D model reconstruction. Simulated screw insertion was performed on both sides of the midline of the intervertebral space. The entry point (P1) was determined when the upper and lower screw paths did not overlap. When the screw was tangent to the medial edge of the Luschka joint, the insertion point was determined as the entry point (P2). Measurements were taken and recorded for the following parameters: distance from the screw entry point to the midline of the intervertebral space (DPM), the simulated screw length, inclination angle, cranial/caudal tilted angle, the anterior-posterior (AP) and mediolateral (ML) diameters of the cervical intervertebral space, the heights of the anterior, middle, and posterior edges of the cervical intervertebral space, and the curvature diameter of the lower end plate of the cervical vertebral body. Statistical analysis was performed on the measurement results. RESULTS: The screw entry area (P1P2) showed an increasing trend from C3-C7 in both male (2.92-6.08 mm) and female (2.32-5.12 mm) groups. There were statistical differences between men and women at the same level (P < 0.05). The average screw length of men and women was greater than 20 mm, and the upper and lower screw lengths showed an increasing trend from C3 to C7. In the area where screws could be inserted, the range of screw inclination was as follows: male group upper screw (47.73-66.76°), lower screw (48.05-65.35°); female group upper screw (49.15-65.66°) and lower screw (49.42-63.29°); The range of cranial/caudal tilted angle of the screw was as follows: male group upper screw (32.06-39.56°), lower screw (29.12-36.95°); female group upper screw (30.97-38.92°) and lower screw (27.29-37.20°). The anterior-posterior diameter and mediolateral diameter of the cervical intervertebral space showed an increasing trend from C3 to C7 in both male and female groups. The middle height (MH) of the cervical intervertebral space was greater than the anterior edge height (AH) and posterior edge height (PD), with statistical differences (P < 0.05). CONCLUSIONS: Through the study of CT images of the cervical spine, it was determined that the ATPRS intervertebral fusion system has a feasible area for screw insertion in the cervical intervertebral space.

[Minimally invasive direct lateral approach debridement, interbody bone grafting, and interbody fusion combined with posterior percutaneous pedicle screw fixation for lumbar spinal tuberculosis].

OBJECTIVE: To investigate the clinical efficacy and superiority of direct lateral interbody fusion combined with posterior percutaneous screw fixation in the treatment of lumbar tuberculosis. METHODS: From June 2013 to August 2016, the clinical data of 83 patients with lumbar tuberculosis were retrospectively analyzed, including 55 males and 28 females, aged from 27 to 72 (49.5±13.5) years. These 83 patients were divided into two groups according to different operation methods, 35 cases in group A were treated with direct lateral interbody fusion combined with posterior percutaneous screw fixation;48 cases in group B were treated with anterior traditional extraperitoneal debridement combined with posterior internal fixation. After operation, regular quadruple antituberculosis drugs were continued for 18 months. The operation time, intraoperative blood loss, hospital stay, bone graft fusion time and complications were compared between the two groups. Visual analogue score (VAS) of lumbar pain, Oswestry Disability Index (ODI), sagittal Cobb angle, erythrocyte sedimentation rate (ESR) and C-reactive protein(CRP) values before and after operation were analyzed. RESULTS: The operation was successfully completed in both groups, and the operation mode was not changed during operation. The operation time, intraoperative blood loss and hospital stay were (149.4±13.3) min, (354.3±69.0) ml, (9.4±1.6) d in group A and(116.8±10.0) min, (721.9±172.3) ml, (11.8±1.7) d in group B, respectively, with significant difference between the two groups (P<0.05). The follow up time was (24.2±5.1) months in group A and (24.0±5.0) months in group B, there was no significant difference between two groups (P>0.05). At the follow-up of 4 months after operation, one patient in group A was found to have enlarged psoas major abscess on the contralateral side, and was cured after secondary operation. No sinus formation, cerebrospinal fluid leakage, internal fixation loosening, fracture or distal junction kyphosis were found during follow-up. The fusion time was (5.1±1.6) months in group A and (5.1± 1.7) months in group B, there was no significant difference between two groups (P>0.05). The VAS, ODI score, sagittal Cobb angle, ESR and CRP value of the lesion segment at the last follow-up of the two groups were significantly improved (P<0.05), but there was no significant difference between two groups (P>0.05). CONCLUSION: The two kinds of operation can obtain satisfactory clinical effect. Direct lateral interbody fusion combined with posterior percutaneous screw fixation can reduce intraoperative blood loss and hospital stay, which is conducive to early rehabilitation of patients.

[Effect of posterior osteotomy on the sagittal parameters of the spinopelvis in patients with lumbar degenerative kyphosis].

OBJECTIVE: To investigate the influence of posterior osteotomy on spinopelvic parameters in lumbar degenerative kyphosis (LDK) patients. METHODS: The clinical data of 21 patients with lumbar degenerative kyphosis who underwent osteotomy from January 2012 to December 2015 were retrospectively analyzed. There were 5 males and 16 females, aged from 55 to 76 years with an average of (66.24±5.13) years. All patients had taken preoperative and postoperative full length spinal X-ray, analyzing the spinopelvic parameters as thoracic kyphosis (TK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT) and sacral slope (SS). RESULTS: All operations were successful, the average operative time was 190 min (160 to 220 min) and intraoperative blood loss was 1 000 ml (800 to 1900 ml). Parameters of the patients between preoperative and period 1-year follow-up were as follows : preoperative TK increased from (31.67±21.13) ° to (34.67±11.60) °, LL corrected from (4.76±3.17) ° to (37.41±6.28) °, PT reduced from (33.94±5.01) ° to (20.12±5.36) °, and SS improved from (18.47±2.60) ° to (31.71±4.30) °, SVA restored from (13.24±3.60) cm to (2.82±1.33) cm. There were significant differences of spinopelvic parameters between preoperation and postoperation (P<0.05). CONCLUSION: Posterior osteotomy can effectively reconstruct the sagittal balance of spinopelvis in patients with lumbar degenerative kyphosis. The recovery of lumbar lordosis and sacral slope is closely related to the reconstruction of sagittal balance.

[Efficacy of bilateral sagittal cross percutaneous kyphoplasty for preventing recurrent fracture of the cemented vertebrae].

OBJECTIVE: To explore the efficacy of bilateral sagittal cross percutaneous kyphoplasty(PKP) for preventing recurrent fracture of the cemented vertebrae. METHODS: From January 2017 to June 2017, 85 patients with single-segment osteoporotic vertebral compression fractures(OVCFs) were treated by bilateral sagittal cross PKP(cross group). There were 35 males and 50 females with an average age of (70.1±8.3) years old in cross group. Another 85 patients with single-segment OVCFs were treated by traditional PKP (traditional group). There were 37 males and 48 females with an average age of (73.3±9.5) years old in traditional group. The cement distribution condition, recurrent fracture of the cemented vertebrae, the anterior vertebral body height and sagittal Cobb angle, visual analogue scale(VAS) were observed in two groups. RESULTS: All patients underwent operation successfully. The follow-up time were (11.8±4.5) months in cross group and (12.1±3.7) months in traditional group. In cross group, all patients' bone cement touched the upper and lower endplates of the vertebral body while 67 cases (78.8%) in traditional group did with significant difference between two groups (P<0.05). No patient in cross group suffered recurrent fracture of the cemented vertebrae while 10 cases (11.8%) in traditional group did with significant difference between two groups(P<0.05). The anterior vertebral body height, sagittal Cobb angle and VAS in both groups were obvious improved at 2 days after operation (P<0.05) and there were no significant difference between two groups at 2 days after operation and the final follow-up(P>0.05). CONCLUSIONS: Bilateral sagittal cross PKP was a simple, safe and effective technique which can make bone cement distribute in the fractured vertebral body and contact the upper and lower endplates of the vertebral body, thus preventing the recurrent fracture of the cemented vertebrae.

[Digital modeling and analysis of the applicability of backward rotation method in lumbar kyphoplasty with unilateral puncture].

OBJECTIVE: The 3D model of lumbar spine was established by using Mimics software. To observe the applicability and needling parameters of lumbar vertebral kyphoplasty with unilateral puncture by backward rotation method using simulated puncture. METHODS: Twenty-four patients (12 males and 12 females) with osteoporotic thoracic fracture in the first time and no signs of lumbar misalignment and bone destruction were scanned by spiral CT on the lumbar spine. The original DICOM file was modeled in 3D with Mimics software, and the vertebral bodies were separated. After being imported into 3-matic software, the posterior wall of the vertebral body was restrained for standardized measurement. A sketch perpendicular to the mid-section of the pedicle and the posterior wall of the vertebral body was drawn. The simulated puncture was performed on the sketch. The angle and distance parameters of the range of motion of the puncture needle were recorded, and the puncture needle was recorded at the top. The crossing points of the anterior, middle and posterior zones of the tangential line of the vertebral body were located at the high extraversion angle, and the results were compared and analyzed. RESULTS: All the data in the left and right sides had no significantly differences(P>0.05). Data of different segments in different gender were significantly differences(P<0.05). The maximal extraversion angle in lumbar spine increased gradually from (33.41±1.31) degree to (56.53±4.71) degree in males, as same as in females from(28.58±2.55) to (53.86±2.68) degree. There was no crossing point in area A, 3.3% of males and 26.67% of females in area B, rest in area C. The distribution areas on gender showed statistically significance (P<0.05). CONCLUSIONS: Backward rotation method can theoretically meet the requirements of puncture point for vertebral compression fracture, especially for males and lower lumbar spine. The determination of the maximum inclination angle is of guiding significance to the backward rotation method.

[French door segmented laminectomy decompression for severe cervical ossification of posterior longitudinal ligament complicated with spinal cord injury].

OBJECTIVE: To evaluate the clinical effects of French door segmented laminectomy decompression for severe cervical OPLL complicated with spinal cord injury. METHODS: The clinical data of 38 patients with serious cervical OPLL complicated with spinal cord injury were retrospectively analyzed and these patients were treated with French door segmented laminectomy decompression and internal fixation from June 2012 to June 2014. There were 25 males and 13 females, aged from 42 to 78 years with an average of 58.2 years. Of them, 35 cases suffered from aggravating neurological symptoms with a definite precipitating factor. Spinal cord injury was related to minor injury of the neck, such as hyperextension of the neck in 3 cases. Preoperative Japanese Orthopaedic Score (JOA) was 8.1±1.7 and Neck Disability Index (NDI) was 19.8±4.4. Preoperative CT scans showed the range of OPLL was more than three segments. The spinal canal was occupied 50% to 85% with an average of 70.7%. RESULTS: All the patients were followed up for 10 to 24 months with an average of 15.6 months. The operative time was 90 to 150 min with an average of 120 min and blood loss was 300 to 800 ml with an average of (480±80) ml. At final follow-up, NDI and JOA were 7.5±2.5 and 13.5±2.0, respectively, and they were obviously improved compared with preoperation. Preoperative cervical Cobb angle was (8.10±2.70)° and at final follow-up was (15.60±1.80)°, and there was significant difference between preoperative and postoperative (P<0.05). Deep infection occurred in 1 case, epidural hematoma in 1 case, C5 nerve root palsy in 3 cases, and axial symptom in 8 cases after operation. No serious complications, such as vertebral artery injury, cerebrospinal fluid leakage, deterioration of neurological dysfunction, or internal fixation failure was found. CONCLUSIONS: French door segmented laminectomy decompression is safe and feasible for severe cervical OPLL complicated with spinal cord injury, and it is worth to be popularized in future.

Two new triterpenoid saponins obtained by microbial hydrolysis with Alternaria alternata AS 3.6872.

Compound 1, a triterpenoid saponin from Ardisia gigantifolia Stapf showing potential anti-tumour activity, was hydrolysed into two deglycosyl derivatives (2 and 3) by Alternaria alternata AS 3.6872. Both these derivatives are new compounds. Their structures were elucidated on the basis of 1D, 2D NMR, HR-ESI-MS and optical rotation spectral data. Compounds 1-3 were evaluated for their cytotoxicity against human hepatocellular carcinoma and normal liver cells by Cell Counting Kit 8 colorimetric assay.

Biotransformation on the triterpenoid saponin of Ardisia gigantifolia by Aspergillus avenaceus AS 3.4454.

Compound 1, a triterpenoid saponin from Ardisia gigantifolia Stapf. showing potential anti-tumor activity, was transformed into three derivatives (2-4) by Aspergillus avenaceus 3.4454. Among them, compounds 2 and 3 are new compounds. Their structures were elucidated on the basis of 1D NMR, 2D NMR, HR-ESI-MS, and optical rotation data. Compounds 1-3 were evaluated for their cytotoxicity against human hepatocellular carcinoma and normal liver cells by cell counting kit 8 colorimetric assay. Compound 3 displayed better cytotoxicity against Bel-7402 and HepG2 cell lines and much weaker cytotoxicity against normal liver L02 cell than that of positive control (epirubicin hydrochloride).

[Treatment of flexion-distraction thoracolumbar fractures by postural reduction with instrumental reduction].

OBJECTIVE: To study the curative effect of postural reduction with instrumental reduction in treatment of flexion-distraction thoracolumbar fractures. METHODS: A retrospective study was performed on 43 patients with single thoracolumbar flexion-distraction fractures admitted from August 2009 to August 2011, included 28 males and 15 females with an average age of 44 years old (34 to 56 years old). All patients were treated with postural reduction with instrumental reduction. The kyphosis (Cobb angle) recovery of injured vertebral height and complication were analyzed. The visual analogue scale(VAS) and com-plications were followed up and recorded. RESULTS: There was no difference in recovery of injured vertebral posterior height among preoperative, 1 week and 1 year after operation (P > 0.05). There were significantly difference in kyphosis (Cobb angle) and recovery of injured vertebral anterior height between preoperative and postoperative at 1 week (P < 0.05). There was no difference in kyphosis (Cobb angle) and recovery of injured vertebral anterior height between 1 week and 1 year after operation (P > 0.05). VAS significantly improved from preoperative (7.2 +/- 1.2) to (0.8 +/- 0.7) at 1 year after operation (t = 18.47, P < 0.001). CONCLUSION: Postural reduction with instrumental reduction is effective for thoracolumbar flexion-distraction fractures and it is beneficial to the recovery of vertebral height and saggital alignment.

Function-preserving reduction and fixation of unstable Jefferson fractures using a C1 posterior limited construct.

STUDY DESIGN: This is a retrospective, clinical, and radiologic study of posterior reduction and fusion of the C1 arch in the treatment of unstable Jefferson fractures. OBJECTIVE: The aim of the study was to describe a new motion-preserving surgical technique in the treatment of unstable Jefferson fracture. SUMMARY OF BACKGROUND DATA: The management of unstable Jefferson fractures remains controversial. The majority of C1 fractures can be effectively treated nonoperatively with external immobilization unless there is an injury to the transverse atlantal ligament (TAL). Conservative treatment usually involves immobilization for a long time in Halo vest, whereas surgical intervention generally involves C1-C2 fusion, eliminating the range of motion of the upper cervical spine. We propose a novel method for the treatment of unstable Jefferson fractures without restricting the range of motion. METHODS: A retrospective review of 12 patients with unstable C1 fractures between April 2008 and October 2011 was performed. They were treated by inserting bilateral posterior C1 pedicle screws or lateral mass screws interconnected by a transversal rod to achieve internal fixation. There were 8 men and 4 women, with an average age of 35.6 years (range, 20-60 y). Presenting symptoms included neck pain, stiffness, and decreased range of motion but none had neurological injury. Seven patients had bilateral posterior arch fractures associated with unilateral anterior arch fractures (posterior 3/4 Jefferson fracture, Landells type II), and 5 had unilateral anterior and posterior arch fractures (half-ring Jefferson fracture, Landells type II). Seven patients had intact TAL, and 5 patients had fractures and avulsion of the attachment of TAL (Dickman type II). RESULTS: A total of 24 screws were inserted. Five cases had screws placed in the lateral mass: 3 because of posterior arch breakage, and 2 because the height of the posterior arch at the entry point was <4 mm. The remaining 7 cases had pedicle screw fixation. One patient had venous plexus injury during exposure of lower margin of the posterior arch; however, successful hemostasis was achieved with Gelfoam. Postoperative x-ray and computed tomography scan showed partial breach of the transverse foramen caused by a screw in 1 case, and breach of the inner cortex of the pedicle caused by screw displacement in 1 case; however, no spinal cord injury or vertebral artery injury was found. The remaining screws were in good position. Patients were followed up for 6-40 months (average, 22 mo). All cases had recovery of range of motion of the cervical spine to the preinjury level by 3-6 months after surgery, with resolution of pain. At 6 months follow-up, plain radiographs and computed tomography scans revealed satisfactory cervical alignment, no implant failure, and satisfactory bony fusion of the fractures; no C1-C2 instability was observed on the flexion-extension radiographs. CONCLUSIONS: C1 posterior limited construct is a valid technique and a feasible method for treating unstable Jefferson fractures, which allows preservation of the function of the craniocervical junction, without significant morbidity.

Accuracy and complications associated with the freehand C-1 lateral mass screw fixation technique: a radiographic and clinical assessment.

OBJECT: The aims of this study were to evaluate a large series of posterior C-1 lateral mass screws (LMSs) to determine accuracy based on CT scanning findings and to assess the perioperative complication rate related to errant screw placement. METHODS: Accuracy of screw placement was evaluated using postoperative CT scans obtained in 196 patients with atlantoaxial instability. Radiographic analysis included measurement of preoperative and postoperative CT scans to evaluate relevant anatomy and classify accuracy of instrumentation placement. Screws were graded using the following definitions: Type I, screw threads completely within the bone (ideal); Type II, less than half the diameter of the screw violates the surrounding cortex (safe); and Type III, clear violation of transverse foramen or spinal canal (unacceptable). RESULTS: A total of 390 C-1 LMSs were placed, but 32 screws (8.2%) were excluded from accuracy measurements because of a lack of postoperative CT scans; patients in these cases were still included in the assessment of potential clinical complications based on clinical records. Of the 358 evaluable screws with postoperative CT scanning, 85.5% of screws (Type I) were rated as being in the ideal position, 11.7% of screws (Type II) were rated as occupying a safe position, and 10 screws (2.8%) were unacceptable (Type III). Overall, 97.2% of screws were rated Type I or II. Of the 10 screws that were unacceptable on postoperative CT scans, there were no known associated neurological or vertebral artery (VA) injuries. Seven unacceptable screws erred medially into the spinal canal, and 2 patients underwent revision surgery for medial screws. In 2 patients, unilateral C-1 LMSs penetrated the C-1 anterior cortex by approximately 4 mm. Neither patient with anterior C-1 penetration had evidence of internal carotid artery or hypoglossal nerve injury. Computed tomography scanning showed partial entry of C-1 LMSs into the VA foramen of C-1 in 10 cases; no occlusion, associated aneurysm, or fistula of the VA was found. Two patients complained of postoperative occipital neuralgia. This was transient in one patient and resolved by 2 months after surgery. The second patient developed persistent neuralgia, which remained 2 years after surgery, necessitating referral to the pain service. CONCLUSIONS: The technique for freehand C-1 LMS fixation appears to be safe and effective without intraoperative fluoroscopy guidance. Preoperative planning and determination of the ideal screw insertion point, the ideal trajectory, and screw length are the most important considerations. In addition, fewer malpositioned screws were inserted as the study progressed, suggesting a learning curve to the technique.

[Clinical application of centerpiece titanium plate fixation in open door laminoplasty].

OBJECTIVE: To explore the clinical application of Centerpiece titanium plate fixation in open door laminoplasty. METHODS: From January 2009 to December 2010,25 patients with cervical spinal stenosis were treated by open door laminoplasty with Centerpiece titanium plate fixation. There were 16 males and 9 females,with a mean age of (57.2 +/- 6.7) years (ranged, 44 to75 years). There were multilevel cervical myelopathy in 8 cases, posterior longitudinal ligament ossification in 12 cases and congenital cervical spinal stenosis in 5 cases. According to Japanese Orthopedic Association (JOA) score to evaluate nerve function and calculate improvement rate. X-ray and CT were used to evaluate postoperative spinal canal enlargement and bone fusion at the hinge side. The sagittal diameter of C5 spinal canal on the lateral X-ray was measured before operation and 6 months after operation respectively, and the expansion rate of spinal canal was calculated [(postoperative sagittal diameter-preoperative sagittal diameter)/(preoperative sagittal diameter) x 100%]. RESULTS: The operative time and intraoperative blood loss were respectively (165.5 +/- 35.6) min and (325.0 +/- 75.1) ml. All patients were followed up from 6 to 18 months with an average of (7.3 +/- 3.8) months. The JOA score increased from 9.3 +/- 1.1 before operation to 14.7 +/- 2.1 at 6 months after operation (t = 4.12, P < 0.05), and the improvement rate was (64.5 +/- 10.2)%. Radiographic data showed spinal canal enlarged perfectly, bone fusion at hinge side and no cervical spinal stenosis was found. The sagittal diameter of C5 spinal canal improved from (9.0 +/- 1.5) mm before operation to (14.3 +/- 2.0) mm at 6 months after operation (t = 7.61, P < 0.05), and the expansion rate was (67.6 +/- 11.8)%. CONCLUSION: Clinical application of Centerpiece titanium plate fixation in open door laminoplasty is safe and effective. While vertebral plate is elevated to obtain instantly stability, at the same time, the integrity of spinal canal is also recovered.

Biomechanical study of the atlantoaxial joint after artificial atlanto-odontoid joint arthroplasty.

OBJECTIVE: To investigate the stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint (AAOJ) arthroplasty by comparing with a conventional method. METHODS: After anterior decompression, 24 human cadaveric spinal specimens of C0-C3 were randomly divided into two groups: Group A receiving artificial AAOJ arthroplasty; Group B experiencing anterior transarticular screw (ATAS) fixation. Two groups underwent flexibility test in intact and instrumented states. Rotational angle of the C0-C3 segments was measured to study the immediate stability and function of anterior decompression with AAOJ arthroplasty compared with the intact state and ATAS fixation. RESULTS: Compared with the intact state, anterior decompression with AAOJ arthroplasty resulted in a significant decrease in the range of motion (ROM) and neutral zone (NZ) during flexion, extension and lateral bending (P less than 0.05); however, with regard to axial rotation, there was no significant difference in ROM and NZ (P larger than 0.05). Compared with anterior decompression with ATAS fixation, anterior decompression with AAOJ arthroplasty during flexion, extension and lateral bending, significant difference was found in ROM and NZ (P larger than 0.05); however, as for axial rotation, there was a significant increase in ROM and NZ (P less than 0.05). CONCLUSION: The self-designed AAOJ has an excellent biomechanical performance, which can restore excellent instant stability and preserve the movement of the atlantoaxial joint.

Short-term clinical observation of the Dynesys neutralization system for the treatment of degenerative disease of the lumbar vertebrae.

OBJECTIVE: To explore the safety and short-term efficacy of the posterior approach of the Dynesys dynamic neutralization system for degenerative disease of the lumbar vertebrae. METHODS: From March 2008 to March 2010, 32 cases of degenerative lumbar vertebral disease, 19 men and 13 women, (mean age 58 ± 5.2, range, 43-78 years), were treated with posterior laminectomy and Dynesys internal fixation. All patients had a history of over 3 months waist or leg pain that had not been relieved by conservative treatment. There were 10 cases of single lumbar intervertebral disc protrusion, 14 of degenerative lumbar spinal stenosis, 5 of degenerative lumbar isthmic spondylolisthesis, and 3 of recurrent lumbar disc protrusion after surgery. A visual analogue score (VAS) was used for pain assessment, and the Oswestry disability index (ODI) for functional evaluation of clinical outcomes. RESULTS: All patients were followed up for 6-23 months (mean, 16.4 ± 5.5 months). Forty-one segments in 32 patients were stabilized; 23 cases (71.9%) underwent single-segmental stabilization, and 9 (28.1%) two-segmental stabilization. VAS of leg pain, root and low back pain was significantly improved postoperatively. The ODI improved from preoperative 69% ± 12.6% to postoperative 28% ± 15.7% (P < 0.001). On the stabilized segment and adjacent segments above and below, the range of movement showed no statistical difference; no loosening of screws, cord and polyester spacer occurred. CONCLUSION: The Dynesys dynamic neutralization system combined with decompression can achieve satisfactory short-term clinical results in lumbar degenerative disease. This procedure system not only reduces back and leg pain, but also preserves the mobility of fixed segments, minimizes tissue injury and avoids taking bone for spinal fusion.

Feasibility study on posterior laminar screw fixation techniques in the axis.

OBJECTIVE: To get morphologic parameters of Chinese adults through observation and measurement on axial laminas, to evaluate the feasibility of placing axial laminar screws and to introduce the technique. METHODS: Relative parameters of 28 sets of fresh Chinese adults'axial specimens, including distance from the superior and inferior entry points of axial laminar screws to the superior margins of axial laminas, superior, middle, inferior thickness and height of the axial laminas, length and angle of the axial laminar screw trajectories, distance from the entry points of axial laminar screws to the transverse foramen and central points of the inferior articular process, were measured with a digital caliper and a goniometer. Data were statistically analyzed. RESULTS: Averagely, distance from the superior and inferior entry points of axial laminar screws to the superior margins of axial laminas was 5 mm and 9 mm, superior, middle, inferior thickness and the height of the axial laminas were 3.2 mm, 6.7 mm, 5.5 mm and 12.8 mm respectively, and the length of the superior and inferior axial laminar screw trajectories was 26.2 mm and 25.5 mm, respectively. CONCLUSIONS: It is feasible and reliable to apply posterior laminar screw fixation techniques to the axes of Chinese adults. Also the C2 laminar screw fixation technique can be taken as a supplementary to conventional posterior screw fixations of C2.

Posterior cervical spine arthrodesis incorporating C2 laminar screw fixation in the treatment of cervical spine injury.

OBJECTIVE: To investigate the clinical application and efficacy of an internal fixation technique incorporating C(2) laminar screws for upper cervical spine injury. METHODS: Using a posterior cervical approach, incorporating C(2) laminar screw fixation and bone grafting were performed on 20 patients with cervical spine injury. There were 12 male and 8 female patients, with a mean age of 45.6 years (range, 32-71 years). All patients were evaluated by X-ray, computed tomography (CT) and magnetic resonance imaging (MRI). RESULTS: The patients were followed up for 11-35 months (mean, 15 months), and bony union was achieved in all patients. There were no spinal cord or vertebral artery injuries during surgery, and only two instances of vein clump injury, in both of which the bleeding was controlled successfully. Postoperative CT scans showed that all the C(2) laminar screws had been placed properly, and were not encroaching on the spinal canal. No spinal instability, evidence of hardware failure or screw loosening was found during the follow-up period in any patient. CONCLUSION: Crossing C(2) laminar screw internal fixation technique is simple, and is not limited by the position of the vertebral artery in the body of C(2). The laminar screw method avoids arterial injuries and also can be used as a salvage method after previous misinsertion. As all relevant structures are directly visualized during C(2) laminar screw placement, this kind of technique may be applicable to a large number of patients.

Biomechanical evaluation of stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint arthroplasty.

OBJECTIVE: To investigate the stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint (AAOJ) arthroplasty. METHOD: Ten sets of AAOJ implanted in bony specimens from 10 adults were used to test the pull-out strength of the atlas-axis components with a MTS858 Mini Bionix machine. Another twelve human cadaveric specimens including C(0)-C(4) were used to evaluate the three-dimensional movements of C(1)-C(2) under five different conditions in sequence, that is, the complete specimen, anterior decompression, posterior transarticular screws fixation, AAOJ arthroplasty and fatigue test. RESULT: There were significant differences between atlas and axis components in the maximum pull-out strength and trajectory length, however the yield length was not significantly different. The maximum pull-out strength of the atlas and axis was positively correlated with trajectory length (r(1)= 0.880, P < 0.05) and yield length (r(2)= 0.606, P < 0.05), respectively. After AAOJ arthroplasty, the range of movement (ROM) with respect to rotation and the neutral zone of the atlantoaxial joint were close to normal (P > 0.05), but the ROM in flexion-extension and lateral bending was significantly smaller compared with the specimens which underwent anterior decompression (P < 0.05). No abrasion and abnormal mobilization were observed after 2000 cycles of flexion, extension, lateral bending and axial rotation in the fatigue test. CONCLUSIONS: The self-designed AAOJ has excellent biomechanical performance, and AAOJ arthroplasty can restore excellent instant stability and preserve the movement of the atlantoaxial joint.

[Clinical analysis of one-stage posterior-anterior operative approach in treating lower cervical spine fracture and dislocation].

OBJECTIVE: To investigate the clinical effects of one-stage posterior-anterior decompression and internal fixation for the treatment of the severe fractures and dislocations combined with the spinal cord injuries of the lower cervical spine. METHODS: From August 2005 to August 2009, 48 patients (male 28 and female 20, aged from 28 to 62 years with a mean of 39.6 years) with severe fractures and dislocations of lower cervical spine were treated by reduction and internal fixation with one-stage combined cervical anterior plating and posterior lateral mass screws and rod or plate systems. Frankel grade A was in 8 cases, grade B in 16 cases, grade C in 20 cases, and grade D in 4 cases before operation. Firstly, the posterior approach was carried out. After inserting the mass screws, decompression and reduction were performed, and the rod or plate systems were embedded. After grafting, the skull traction was removed and initiated the anterior reduction, intervertebral decompression, auto-graft and cervical spine auto-locking plate fixation. The stability and fusion rate of the injured segments were evaluated on the regular postoperative X-ray film. The function of the spinal cord was assessed with Frankle classification. RESULTS: All patients were followed up, ranged from 6 to 28 months with an average of 12 months. Solid fusion obtained in the postoperative 6 months. Frankel grade C was in 28 cases, grade D in 14 cases, grade E in 6 cases after operation. There was no complications related to internal fixation breakage, loosening or displacement. There was no vascular and esophagus complications during the operation. CONCLUSION: One-stage combined anterior-posterior decompression and internal fixation in treating severe fracture and dislocations of lower cervical spine could restore the cervical curvature, and obtain good reduction and complete decompression, and gain postoperative immediate stability. This technique is benefit to the patients for the functional recovery of the spinal cord.