RESUMO
Low temperature ionic conducting materials such as OH- and H+ ionic conductors are important electrolytes for electrochemical devices. Here we show the discovery of mixed OH-/H+ conduction in ceramic materials. SrZr0.8Y0.2O3-δ exhibits a high ionic conductivity of approximately 0.01 S cm-1 at 90 °C in both water and wet air, which has been demonstrated by direct ammonia fuel cells. Neutron diffraction confirms the presence of OD bonds in the lattice of deuterated SrZr0.8Y0.2O3-δ. The OH- ionic conduction of CaZr0.8Y0.2O3-δ in water was demonstrated by electrolysis of both H218O and D2O. The ionic conductivity of CaZr0.8Y0.2O3-δ in 6 M KOH solution is around 0.1 S cm-1 at 90 °C, 100 times higher than that in pure water, indicating increased OH- ionic conductivity with a higher concentration of feed OH- ions. Density functional theory calculations suggest the diffusion of OH- ions relies on oxygen vacancies and temporarily formed hydrogen bonds. This opens a window to discovering new ceramic ionic conducting materials for near ambient temperature fuel cells, electrolysers and other electrochemical devices.
RESUMO
Layered tetrahedral network melilite is a promising structural family of fast ion conductors that exhibits the flexibility required to accommodate interstitial oxide anions, leading to excellent ionic transport properties at moderate temperatures. Here, we present a combined experimental and computational magic angle spinning (MAS) nuclear magnetic resonance (NMR) approach which aims at elucidating the local configurational disorder and oxide ion diffusion mechanism in a key member of this structural family possessing the La1.54Sr0.46Ga3O7.27 composition. 17O and 71Ga MAS NMR spectra display complex spectral line shapes that could be accurately predicted using a computational ensemble-based approach to model site disorder across multiple cationic and anionic sites, thereby enabling the assignment of bridging/nonbridging oxygens and the identification of distinct gallium coordination environments. The 17O and 71Ga MAS NMR spectra of La1.54Sr0.46Ga3O7.27 display additional features not observed for the parent LaSrGa3O7 phase which are attributed to interstitial oxide ions incorporated upon cation doping and stabilized by the formation of five-coordinate Ga centers conferring framework flexibility. 17O high-temperature (HT) MAS NMR experiments capture exchange within the bridging oxygens at 130 °C and reveal coalescence of all oxygen signals in La1.54Sr0.46Ga3O7.27 at approximately 300 °C, indicative of the participation of both interstitial and framework oxide ions in the transport process. These results further supported by the coalescence of the 71Ga resonances in the 71Ga HT MAS NMR spectra of La1.54Sr0.46Ga3O7.27 unequivocally provide evidence of the conduction mechanism in this melilite phase and highlight the potential of MAS NMR spectroscopy to enhance the understanding of ionic motion in solid electrolytes.
RESUMO
Plant biomass plays an increasingly important role in the circular bioeconomy, replacing non-renewable fossil resources. Genetic engineering of this lignocellulosic biomass could benefit biorefinery transformation chains by lowering economic and technological barriers to industrial processing. However, previous efforts have mostly targeted the major constituents of woody biomass: cellulose, hemicellulose and lignin. Here we report the engineering of wood structure through the introduction of callose, a polysaccharide novel to most secondary cell walls. Our multiscale analysis of genetically engineered poplar trees shows that callose deposition modulates cell wall porosity, water and lignin contents and increases the lignin-cellulose distance, ultimately resulting in substantially decreased biomass recalcitrance. We provide a model of the wood cell wall nano-architecture engineered to accommodate the hydrated callose inclusions. Ectopic polymer introduction into biomass manifests in new physico-chemical properties and offers new avenues when considering lignocellulose engineering.
Assuntos
Lignina , Madeira , Biomassa , CeluloseRESUMO
Encapsulation of molecules into mesoporous silica carriers continues to attract considerable interest in the area of drug delivery and crystal engineering. Here, MCM-41, SBA-15 and MCF silica matrices were used to encapsulate fluconazole (FLU), a pharmaceutically relevant molecule with known conformational flexibility, using the melting method. The composites have been characterized using 1H, 13C and 19F NMR spectroscopy, nitrogen adsorption, PXRD and thermal analysis (DSC, TGA). Drug loading up to 50 wt% allowed us to probe the crystallization process and to detect different local environments of confined FLU molecules. 19F NMR spectroscopy enabled us to detect the gradual pore filling of silica with FLU and differentiate the amorphous domains and surface species. The use of the complementary structural and thermal techniques enabled us to monitor crystallization of the metastable FLU form II in MCF. Using 1H and 19F NMR spectroscopy we observed pore-size dependent reversible dehydration/hydration behaviour in the MCM and SBA composites. As water content has considerable importance in understanding of physicochemical stability and shelf-life of pharmaceutical formulations, experimental evidence of the effect of API-water-carrier interactions on the API adsorption mechanism on silica surface is highlighted.
Assuntos
Fluconazol , Água , Cristalização , Água/química , Dióxido de Silício/química , Espectroscopia de Ressonância Magnética/métodos , PorosidadeRESUMO
Post-acquisition correction of NMR spectra is an important part of NMR spectroscopy that enables refined NMR spectra to be obtained, clean from undesirable out-phasing, broadening and noising. We describe analytical and numerical mathematical methods for post-acquisition correction of NMR spectra distorted by static and dynamic magnetic field inhomogeneity caused by imperfections of main superconducting coils and the cold head operation, typical for cryogen-free magnets. For the dynamic inhomogeneity, we apply a variant of the general reference deconvolution method, complemented with our mathematical analysis of spectral parameters. For the static inhomogeneity, we apply the method of a delayed Fourier transform, also supported with our analytical calculations. We verify our approach by correction processing of high-field experimental liquid-state 1H NMR spectra of water and ethanol as well as solid-state 13C MAS NMR spectra of adamantane and obtain good results for both static and dynamic field distortions. This work complements our previous work on instrumental suppression of dynamic distortions caused by the cold head operation. The results presented contribute well to the general field of processing NMR spectra and serve towards a more extensive use of cryogen-free magnets in high-resolution NMR spectroscopy.
RESUMO
Phase transitions in crystalline molecular solids have important implications in the fundamental understanding of materials properties and in the development of materials applications. Herein, we report the solid-state phase transition behavior of 1-iodoadamantane (1-IA) investigated using a multi-technique strategy [synchrotron powder X-ray diffraction (XRD), single-crystal XRD, solid-state NMR, and differential scanning calorimetry (DSC)], which reveals complex phase transition behavior on cooling from ambient temperature to ca. 123 K and on subsequent heating to the melting temperature (348 K). Starting from the known phase of 1-IA at ambient temperature (phase A), three low-temperature phases are identified (phases B, C, and D); the crystal structures of phases B and C are reported, together with a re-determination of the structure of phase A. Remarkably, single-crystal XRD shows that some individual crystals of phase A transform to phase B, while other crystals of phase A transform instead to phase C. Results (from powder XRD and DSC) on cooling a powder sample of phase A are fully consistent with this behavior while also revealing an additional transformation pathway from phase A to phase D. Thus, on cooling, a powder sample of phase A transforms partially to phase C (at 229 K), partially to phase D (at 226 K) and partially to phase B (at 211 K). During the cooling process, each of the phases B, C, and D is formed directly from phase A, and no transformations are observed between phases B, C, and D. On heating the resulting triphasic powder sample of phases B, C, and D from 123 K, phase B transforms to phase D (at 211 K), followed by the transformation of phase D to phase C (at 255 K), and finally, phase C transforms to phase A (at 284 K). From these observations, it is apparent that different crystals of phase A, which are ostensibly identical at the level of information revealed by XRD, must actually differ in other aspects that significantly influence their low-temperature phase transition pathways. This unusual behavior will stimulate future studies to gain deeper insights into the specific properties that control the phase transition pathways in individual crystals of this material.
RESUMO
We show that the temporal magnetic field distortion generated by the Cold Head operation can be removed and high quality Solid-State Magic Angle Spinning NMR results can be obtained with a cryogen-free magnet. The compact design of the cryogen-free magnets allows for the probe to be inserted either from the bottom (as in most NMR systems) or, more conveniently, from the top. The magnetic field settling time can be made as short as an hour after a field ramp. Therefore, a single cryogen-free magnet can be used at different fixed fields. The magnetic field can be changed every day without compromising the measurement resolution.
Assuntos
Campos Magnéticos , Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética/métodos , ImãsRESUMO
We report the modulation of reactivity of nitrogen dioxide (NO2 ) in a charged metal-organic framework (MOF) material, MFM-305-CH3 in which unbound N-centres are methylated and the cationic charge counter-balanced by Cl- ions in the pores. Uptake of NO2 into MFM-305-CH3 leads to reaction between NO2 and Cl- to give nitrosyl chloride (NOCl) and NO3 - anions. A high dynamic uptake of 6.58â mmol g-1 at 298â K is observed for MFM-305-CH3 as measured using a flow of 500â ppm NO2 in He. In contrast, the analogous neutral material, MFM-305, shows a much lower uptake of 2.38â mmol g-1 . The binding domains and reactivity of adsorbed NO2 molecules within MFM-305-CH3 and MFM-305 have been probed using in situ synchrotron X-ray diffraction, inelastic neutron scattering and by electron paramagnetic resonance, high-field solid-state nuclear magnetic resonance and UV/Vis spectroscopies. The design of charged porous sorbents provides a new platform to control the reactivity of corrosive air pollutants.
RESUMO
The production of conjugated C4-C5 dienes from biomass can enable the sustainable synthesis of many important polymers and liquid fuels. Here, we report the first example of bimetallic (Nb, Al)-atomically doped mesoporous silica, denoted as AlNb-MCM-41, which affords quantitative conversion of 2-methyltetrahydrofuran (2-MTHF) to pentadienes with a high selectivity of 91 %. The incorporation of AlIII and NbV sites into the framework of AlNb-MCM-41 has effectively tuned the nature and distribution of Lewis and Brønsted acid sites within the structure. Operando X-ray absorption, diffuse reflectance infrared and solid-state NMR spectroscopy collectively reveal the molecular mechanism of the conversion of adsorbed 2-MTHF over AlNb-MCM-41. Specifically, the atomically-dispersed NbV sites play an important role in binding 2-MTHF to drive the conversion. Overall, this study highlights the potential of hetero-atomic mesoporous solids for the manufacture of renewable materials.
Assuntos
Alcadienos , Nióbio , Nióbio/química , Alumínio , CatáliseRESUMO
Solid titanium phosphate, TiP, materials hold great promise for wastewater treatment for removal of metal ions and complexes. A series of TiP materials, synthesised at mild conditions and short reaction times, have been structurally characterised using solid-state X-ray absorption spectroscopy, phosphorus and titanium K edge XANES and EXAFS, and 31P and 47/49Ti NMR spectroscopy. The titanium K edge EXAFS data of α-Ti(HPO4)2·H2O (α-TiP) revealed octahedral coordination of oxygens around titanium. Repeated washing of primary ß-/γ-TiP with hydrochloric acid results in formation of a weakly ordered solid, TiO(OH)(H2PO4)·H2O, TiP1-H. The structure of TiP1-H is shown by Ti EXAFS to be a titanyl compound, containing a short TiîO bond. The analogous data for linked titanium phosphate compounds (LTP) disclosed that inter-linkage occurs between α-TiP and titanyl phosphate units, supported by 31P-31P NOESY NMR data. 47/49Ti NMR and Ti pre-edge XANES show evidence of two different titanium environments in LTP, one very similar to that observed in TiP1-H and a second more symmetric octahedral environment. Data are discussed in terms of induced acidic hydrolyses of titanium(IV) and phosphate counterpart during washings with hydrochloric acid and water. A straightforward relation between synthesis parameters/post synthetic treatment and structural re-arrangement in the materials is established.
RESUMO
Escherichia coli is a Gram-negative bacterium that colonises the human intestine and virulent strains can cause severe diarrhoeal and extraintestinal diseases. The protein SslE is secreted by a range of pathogenic and commensal E. coli strains. It can degrade mucins in the intestine, promotes biofilm maturation and it is a major determinant of infection in virulent strains, although how it carries out these functions is not well understood. Here, we examine SslE from the commensal E. coli Waksman and BL21 (DE3) strains and the enterotoxigenic H10407 and enteropathogenic E2348/69 strains. We reveal that SslE has a unique and dynamic structure in solution and in response to acidification within mature biofilms it can form a unique aggregate with amyloid-like properties. Furthermore, we show that both SslE monomers and aggregates bind DNA in vitro and co-localise with extracellular DNA (eDNA) in mature biofilms, and SslE aggregates may also associate with cellulose under certain conditions. Our results suggest that interactions between SslE and eDNA are important for biofilm maturation in many E. coli strains and SslE may also be a factor that drives biofilm formation in other SslE-secreting bacteria.
Assuntos
Infecções por Escherichia coli , Proteínas de Escherichia coli , Biofilmes , Escherichia coli/fisiologia , Infecções por Escherichia coli/microbiologia , Proteínas de Escherichia coli/genética , Proteínas de Escherichia coli/metabolismo , Humanos , IntestinosRESUMO
We report the solid-state structural properties of alloxazine, a tricyclic ring system found in many biologically important molecules, with structure determination carried out directly from powder X-ray diffraction (XRD) data. As the crystal structures containing the alloxazine and isoalloxazine tautomers both give a high-quality fit to the powder XRD data in Rietveld refinement, other techniques are required to establish the tautomeric form in the solid state. In particular, high-resolution solid-state 15N NMR data support the presence of the alloxazine tautomer, based on comparison between isotropic chemical shifts in the experimental 15N NMR spectrum and the corresponding values calculated for the crystal structures containing the alloxazine and isoalloxazine tautomers. Furthermore, periodic DFT-D calculations at the PBE0-MBD level indicate that the crystal structure containing the alloxazine tautomer has significantly lower energy. We also report computational investigations of the interconversion between the tautomeric forms in the crystal structure via proton transfer along two intermolecular N-H···N hydrogen bonds; DFT-D calculations at the PBE0-MBD level indicate that the tautomeric interconversion is associated with a lower energy transition state for a mechanism involving concerted (rather than sequential) proton transfer along the two hydrogen bonds. However, based on the relative energies of the crystal structures containing the alloxazine and isoalloxazine tautomers, it is estimated that under conditions of thermal equilibrium at ambient temperature, more than 99.9% of the molecules in the crystal structure will exist as the alloxazine tautomer.
RESUMO
The production of conjugated C4-C5 dienes from biomass can enable the sustainable synthesis of many important polymers and liquid fuels. Here, we report the first example of bimetallic (Nb, Al)-atomically doped mesoporous silica, denoted as AlNb-MCM-41, which affords quantitative conversion of 2-methyltetrahydrofuran (2-MTHF) to pentadienes with a high selectivity of 91 %. The incorporation of AlIII and NbV sites into the framework of AlNb-MCM-41 has effectively tuned the nature and distribution of Lewis and Brønsted acid sites within the structure. Operando X-ray absorption, diffuse reflectance infrared and solid-state NMR spectroscopy collectively reveal the molecular mechanism of the conversion of adsorbed 2-MTHF over AlNb-MCM-41. Specifically, the atomically-dispersed NbV sites play an important role in binding 2-MTHF to drive the conversion. Overall, this study highlights the potential of hetero-atomic mesoporous solids for the manufacture of renewable materials.
RESUMO
The bioavailability of insoluble crystalline active pharmaceutical ingredients (APIs) can be enhanced by formulation as amorphous solid dispersions (ASDs). One of the key factors of ASD stabilization is the formation of drug-polymer interactions at the molecular level. Here, we used a range of multidimensional and multinuclear nuclear magnetic resonance (NMR) experiments to identify these interactions in amorphous acetaminophen (paracetamol)/hydroxypropylmethylcellulose acetyl succinate (HPMC-AS) ASDs at various drug loadings. At low drug loading (<20 wt %), we showed that 1H-13C through-space heteronuclear correlation experiments identify proximity between aromatic protons in acetaminophen with cellulose backbone protons in HPMC-AS. We also show that 14N-1H heteronuclear multiple quantum coherence (HMQC) experiments are a powerful approach in probing spatial interactions in amorphous materials and establish the presence of hydrogen bonds (H-bond) between the amide nitrogen of acetaminophen with the cellulose ring methyl protons in these ASDs. In contrast, at higher drug loading (40 wt %), no acetaminophen/HPMC-AS spatial proximity was identified and domains of recrystallization of amorphous acetaminophen into its crystalline form I, the most thermodynamically stable polymorph, and form II are identified. These results provide atomic scale understanding of the interactions in the acetaminophen/HPMC-AS ASD occurring via H-bond interactions.
Assuntos
Acetaminofen/farmacocinética , Derivados da Hipromelose/química , Acetaminofen/química , Disponibilidade Biológica , Química Farmacêutica , Excipientes/química , Ligação de Hidrogênio , Espectroscopia de Ressonância Magnética , Solubilidade , Ácido Succínico/químicaRESUMO
Heteronuclear multiple-quantum coherence (HMQC) pulse sequences for establishing heteronuclear correlation in solid-state nuclear magnetic resonance (NMR) between 35 Cl and 1 H nuclei in chloride salts under fast (60 kHz) magic-angle spinning (MAS) and at high magnetic field (a 1 H Larmor frequency of 850 MHz) are investigated. Specifically, recoupling of the 35 Cl-1 H dipolar interaction using rotary resonance recoupling with phase inversion every rotor period or the symmetry-based SR42 1 pulse sequences are compared. In our implementation of the population transfer (PT) dipolar (D) HMQC experiment, the satellite transitions of the 35 Cl nuclei are saturated with an off-resonance WURST sweep, at a low nutation frequency, over the second spinning sideband, whereby the WURST pulse must be of the same duration as the recoupling time. Numerical simulations of the 35 Cl-1 H MAS D-HMQC experiment performed separately for each crystallite orientation in a powder provide insight into the orientation dependence of changes in the second-order quadrupolar-broadened 35 Cl MAS NMR lineshape under the application of dipolar recoupling. Two-dimensional 35 Cl-1 H PT-D-HMQC MAS NMR spectra are presented for the amino acids glycine·HCl and l-tyrosine·HCl and the pharmaceuticals cimetidine·HCl, amitriptyline·HCl and lidocaine·HCl·H2 O. Experimentally observed 35 Cl lineshapes are compared with those simulated for 35 Cl chemical shift and quadrupolar parameters as calculated using the gauge-including projector-augmented wave (GIPAW) method: the calculated quadrupolar product (PQ ) values exceed those measured experimentally by a factor of between 1.3 and 1.9.
Assuntos
Ressonância Magnética Nuclear Biomolecular , Preparações Farmacêuticas/química , Cloro , Prótons , Sais/químicaRESUMO
In this work, for the first time, we present the X-ray diffraction crystal structure and spectral properties of a new, room-temperature polymorph of teriflunomide (TFM), CSD code 1969989. As revealed by DSC, the low-temperature TFM polymorph recently reported by Gunnam et al. undergoes a reversible thermal transition at -40 °C. This reversible process is related to a change in Z' value, from 2 to 1, as observed by variable-temperature 1H-13C cross-polarization (CP) magic-angle spinning (MAS) solid-state NMR, while the crystallographic system is preserved (triclinic). Two-dimensional 13C-1H and 1H-1H double-quantum MAS NMR spectra are consistent with the new room-temperature structure, including comparison with GIPAW (gauge-including projector augmented waves) calculated NMR chemical shifts. A crystal structure prediction procedure found both experimental teriflunomide polymorphs in the energetic global minimum region. Differences between the polymorphs are seen for the torsional angle describing the orientation of the phenyl ring relative to the planarity of the TFM molecule. In the low-temperature structure, there are two torsion angles of 4.5 and 31.9° for the two Z' = 2 molecules, while in the room-temperature structure, there is disorder that is modeled with â¼50% occupancy between torsion angles of -7.8 and 28.6°. These observations are consistent with a broad energy minimum as revealed by DFT calculations. PISEMA solid-state NMR experiments show a reduction in the C-H dipolar coupling in comparison to the static limit for the aromatic CH moieties of 75% and 51% at 20 and 40 °C, respectively, that is indicative of ring flips at the higher temperature. Our study shows the power of combining experiments, namely DSC, X-ray diffraction, and MAS NMR, with DFT calculations and CSP to probe and understand the solid-state landscape, and in particular the role of dynamics, for pharmaceutical molecules.
RESUMO
In recent years, there has been increasing interest in developing cost-efficient, fast, and user-friendly 17 O enrichment protocols to help to understand the structure and reactivity of materials by using 17 Oâ NMR spectroscopy. Here, we show for the first time how ball milling (BM) can be used to selectively and efficiently enrich the surface of fumed silica, which is widely used at industrial scale. Short milling times (up to 15â min) allowed modulation of the enrichment level (up to ca. 5 %) without significantly changing the nature of the material. High-precision 17 O compositions were measured at different milling times by using large-geometry secondary-ion mass spectrometry (LG-SIMS). High-resolution 17 Oâ NMR analyses (including at 35.2â T) allowed clear identification of the signals from siloxane (Si-O-Si) and silanols (Si-OH), while DNP analyses, performed by using direct 17 O polarization and indirect 17 O{1 H}â CP excitation, agreed with selective labeling of the surface. Information on the distribution of Si-OH environments at the surface was obtained from 2D 1 H-17 O D-HMQC correlations. Finally, the surface-labeled silica was reacted with titania and using 17 O DNP, their common interface was probed and Si-O-Ti bonds identified.
RESUMO
43 Ca nuclear magnetic resonance (NMR) spectroscopy has been extensively applied to the detailed study of octacalcium phosphate (OCP), Ca8 (HPO4 )2 (PO4 )4 .5H2 O, and hybrid derivatives involving intercalated metabolic acids (viz., citrate, succinate, formate, and adipate). Such phases are of importance in the development of a better understanding of bone structure. High-resolution 43 Ca magic angle spinning (MAS) experiments, including double-rotation (DOR) 43 Ca NMR, as well as 43 Ca{1 H} rotational echo DOR (REDOR) and 31 P{43 Ca} REAPDOR NMR spectra, were recorded on a 43 Ca-labeled OCP phase at very high magnetic field (20 T), and complemented by ab initio calculations of NMR parameters using the Gauge-Including Projector Augmented Wave-density functional theory (GIPAW-DFT) method. This enabled a partial assignment of the eight inequivalent Ca2+ sites of OCP. Natural-abundance 43 Ca MAS NMR spectra were then recorded for the hybrid organic-inorganic derivatives, revealing changes in the 43 Ca lineshape. In the case of the citrate derivative, these could be interpreted on the basis of computational models of the structure. Overall, this study highlights the advantages of combining high-resolution 43 Ca NMR experiments and computational modeling for studying complex hybrid biomaterials.
RESUMO
The spectroscopic study of pathological calcifications (including kidney stones) is extremely rich and helps to improve the understanding of the physical and chemical processes associated with their formation. While Fourier transform infrared (FTIR) imaging and optical/electron microscopies are routine techniques in hospitals, there has been a dearth of solid-state NMR studies introduced into this area of medical research, probably due to the scarcity of this analytical technique in hospital facilities. This work introduces effective multinuclear and multidimensional solid-state NMR methodologies to study the complex chemical and structural properties characterizing kidney stone composition. As a basis for comparison, three hydrates (n=1, 2 and 3) of calcium oxalate are examined along with nine representative kidney stones. The multinuclear magic angle spinning (MAS) NMR approach adopted investigates the 1H, 13C, 31P and 31P nuclei, with the 1H and 13C MAS NMR data able to be readily deconvoluted into the constituent elements associated with the different oxalates and organics present. For the first time, the full interpretation of highly resolved 1H NMR spectra is presented for the three hydrates, based on the structure and local dynamics. The corresponding 31P MAS NMR data indicates the presence of low-level inorganic phosphate species; however, the complexity of these data make the precise identification of the phases difficult to assign. This work provides physicians, urologists and nephrologists with additional avenues of spectroscopic investigation to interrogate this complex medical dilemma that requires real, multitechnique approaches to generate effective outcomes.
RESUMO
Understanding the fine details of the self-assembly of building blocks into complex hierarchical structures represents a major challenge en route to the design and preparation of soft-matter materials with specific properties. Enzymatically synthesised cellodextrins are known to have limited water solubility beyond DP9, a point at which they self-assemble into particles resembling the antiparallel celluloseâ II crystalline packing. We have prepared and characterised a series of site-selectively fluorinated cellodextrins with different degrees of fluorination and substitution patterns by chemoenzymatic synthesis. Bearing in mind the potential disruption of the hydrogen-bond network of celluloseâ II, we have prepared and characterised a multiply 6-fluorinated cellodextrin. In addition, a series of single site-selectively fluorinated cellodextrins was synthesised to assess the structural impact upon the addition of one fluorine atom per chain. The structural characterisation of these materials at different length scales, combining advanced NMR spectroscopy and microscopy methods, showed that a 6-fluorinated donor substrate yielded multiply 6-fluorinated cellodextrin chains that assembled into particles presenting morphological and crystallinity features, and intermolecular interactions, that are unprecedented for cellulose-like materials.