National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments.

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers.

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products.

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products.

The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

Effect of Brahman genetics on myofibrillar protein degradation, collagen crosslinking, and tenderness of the longissimus lumborum.

The objective of this study was to examine the effect of percent Brahman genetics on Warner-Bratzler shear force (WBSF), desmin and troponin-T (TnT) degradation, hydroxylysyl pyridinoline (HP) crosslink content, and perimysial collagen melting temperature. Steers ( = 131) produced in 2012 and 2013 were harvested at 1.27 cm of visual s.c. back fat thickness. Steers were divided into 4 genetic categories consisting of steers that contained 6/32 or less Brahman genetics, 12/32 Brahman genetics, 14/32 to 18/32 Brahman genetics, and 23/32 to 32/32 Brahman genetics. Twenty-four hours after harvest, a 7.62-cm piece of the longissimus lumborum beginning at the 13th rib was collected and aged for 14 d. Following aging, three 2.54-cm steaks were cut for WBSF, trained sensory panel, and laboratory analyses. Laboratory analyses steaks were used to determine protein degradation, HP crosslink analysis, and perimysial collagen melting temperature. Data were analyzed using a polynomial regression for unequally spaced treatments. As the percent Brahman genetics increased, WBSF increased (linear, = 0.01). As percent Brahman genetics increased, tenderness score decreased (less tender) and connective tissue score increased (more connective tissue; linear, = 0.01). As the percentage of Brahman genetics increased, the amount of degraded desmin (38 kDa) and TnT (34 and 30 kDa) decreased (linear, < 0.03) whereas the amount of immunoreactive 36 kDa TnT increased (linear, = 0.04). Percent Brahman genetics had no effect ( = 0.14) on HP crosslink content but did tend to increase ( = 0.07) perimysial collagen melting temperature as the percent Brahman increased. The percentage of Brahman genetic influence was positively correlated to WBSF ( = 0.25), 36 kDa immunoreactive TnT ( = 0.26), and perimysial collagen melting temperature ( = 0.25, = 0.01). Sensory panel tenderness ( = -0.44), juiciness ( = -0.26), and connective tissue scores ( = -0.63); 38 kDa degraded desmin ( = -0.34), 34 ( = -0.36) and 30 kDa degraded TnT ( = -0.29); and HP collagen crosslinks ( = -0.20) were negatively correlated to percent Brahman genetic influence ( < 0.03). Increasing Brahman genetic influence in steers negatively affects tenderness, partially through a reduction in degradation of desmin and TnT. Although HP collagen crosslinks are unaffected by Brahman genetics, a tendency for increased perimysium melting temperature indicates that other collagen-stabilizing crosslinks may be affected.

Enhancement of the Superconducting Gap by Nesting in CaKFe_{4}As_{4}: A New High Temperature Superconductor.

We use high resolution angle resolved photoemission spectroscopy and density functional theory with measured crystal structure parameters to study the electronic properties of CaKFe_{4}As_{4}. In contrast to the related CaFe_{2}As_{2} compounds, CaKFe_{4}As_{4} has a high T_{c} of 35 K at stochiometric composition. This presents a unique opportunity to study the properties of high temperature superconductivity in the iron arsenides in the absence of doping or substitution. The Fermi surface consists of several hole and electron pockets that have a range of diameters. We find that the values of the superconducting gap are nearly isotropic (within the explored portions of the Brillouin zone), but are significantly different for each of the Fermi surface (FS) sheets. Most importantly, we find that the momentum dependence of the gap magnitude plotted across the entire Brillouin zone displays a strong deviation from the simple cos(k_{x})cos(k_{y}) functional form of the gap function, proposed by the scenario of Cooper pairing driven by a short range antiferromagnetic exchange interaction. Instead, the maximum value of the gap is observed on FS sheets that are closest to the ideal nesting condition, in contrast to previous observations in other ferropnictides. These results provide strong support for the multiband character of superconductivity in CaKFe_{4}As_{4}, in which Cooper pairing forms on the electron and the hole bands interacting via a dominant interband repulsive interaction, enhanced by band nesting.

Magneto-structural transformations via a solid-state nudged elastic band method: Application to iron under pressure.

We extend the solid-state nudged elastic band method to handle a non-conserved order parameter, in particular, magnetization, that couples to volume and leads to many observed effects in magnetic systems. We apply this formalism to the well-studied magneto-volume collapse during the pressure-induced transformation in iron-from ferromagnetic body-centered cubic (bcc) austenite to hexagonal close-packed (hcp) martensite. We find a bcc-hcp equilibrium coexistence pressure of 8.4 GPa, with the transition-state enthalpy of 156 meV/Fe at this pressure. A discontinuity in magnetization and coherent stress occurs at the transition state, which has a form of a cusp on the potential-energy surface (yet all the atomic and cell degrees of freedom are continuous); the calculated pressure jump of 25 GPa is related to the observed 25 GPa spread in measured coexistence pressures arising from martensitic and coherency stresses in samples. Our results agree with experiments, but necessarily differ from those arising from drag and restricted parametrization methods having improperly constrained or uncontrolled degrees of freedom.

Effect of Brahman genetic influence on collagen enzymatic crosslinking gene expression and meat tenderness.

The objective of the study was to examine the effect of Brahman genetics on collagen enzymatic crosslinking gene expression and meat tenderness. Steers were randomly selected to represent a high percentage Brahman genetics (n = 13), Half-Blood genetics (n = 13), Brangus genetics (n = 13), and a high percentage Angus genetics (n = 13). Muscle samples from the Longissimus lumborum muscle were collected at weaning and harvest and reverse transcription quantitative PCR (qPCR) analysis was conducted to measure the mRNA expression of lysyl oxidase (LOX), bone morphogenetic protein 1 (BMP1), and cystatin C (CYS). Steaks from subject animals were collected at harvest, aged for 14 d and subjected to collagen analysis, Warner-Bratzler Shear Force (WBS) and trained sensory panel analysis (tenderness, juiciness, and connective tissue). Data indicated that Half-Blood and Brahman steers had greater (P<0.05) WBS values and tended to receive decreased (P < 0.06) panel tenderness scores than Angus and Brangus steers. Panelists tended to detect more connective tissue in Brahman and Half-Blood steaks when compared to Angus and Brangus steaks (P < 0.07). Crosslinking gene expression data revealed that at weaning Half-Blood steers had more (P < 0.05) mRNA expression of CYS and LOX than Angus and Brangus steers. At weaning and harvest, all genetic groups had similar mRNA expression of BMP1 (P > 0.10). At harvest, Brangus and Angus steers had greater LOX mRNA expression than Brahman cattle (P < 0.05). Pearson's correlation coefficients indicated that only weaning CYS mRNA expression was correlated to WBS, panel tenderness and connective tissue scores (P < 0.05). Expression of LOX was only correlated to these measures at harvest, and BMP1 was correlated to these traits at both time periods (P < 0.05). These results indicate that collagen crosslinking enzyme activity, as indicated by mRNA levels, early in an animal's life may account for some of the variation seen in steak tenderness due to Brahman genetic influence.

Shape-memory transformations of NiTi: minimum-energy pathways between austenite, martensites, and kinetically limited intermediate states.

NiTi is the most used shape-memory alloy; nonetheless, a lack of understanding remains regarding the associated structures and transitions, including their barriers. Using a generalized solid-state nudged elastic band method implemented via density-functional theory, we detail the structural transformations in NiTi relevant to shape memory: those between a body-centered orthorhombic (bco) ground state and a newly identified stable austenite ("glassy" B2-like) structure, including energy barriers (hysteresis) and intermediate structures (observed as a kinetically limited R phase), and between martensite variants (bco orientations). All results are in good agreement with available experiment. We contrast the austenite results to those from the often-assumed, but unstable B2. These high- and low-temperature structures and structural transformations provide much needed atomic-scale detail for transitions responsible for NiTi shape-memory effects.

Survey of transportation procedures, management practices, and health assessment related to quality, quantity, and value for market beef and dairy cows and bulls.

This survey consisted of data collected from 23 beef harvest plants to document transportation procedures, management practices, and health assessments of market beef and dairy cows and bulls (about n ≅ 7,000 animals). Gooseneck/bumper-pulled trailers were used more often to transport dairy cattle than beef cattle to market whereas tractor-trailers were used more often to transport beef cattle than dairy cattle. All loads (n = 103) met the American Meat Institute Foundation guidelines for spacing. Loads where more than 3% of the cattle slipped during unloading were observed in 27.3% of beef loads and 29.0% of the dairy loads. Beef loads had numerically greater usage of electrical prods (32.4%) versus dairy loads (15.4%) during unloading and were more likely to have a variety of driving aids used more aggressively on them. Fewer cattle had horns, brands, and mud/manure contamination on hides than in the previous survey in 1999. The predominant hide color for beef cows was black (44.2%) whereas the predominant color for dairy cows was the Holstein pattern (92.9%). Fewer cattle displayed evidence of bovine ocular neoplasia (2.9%) than in previous surveys in 1994 (8.5%) and 1999 (4.3%). Knots on live cattle were found less in the round (0.5%) and more in the shoulder region (4.6%) than in 1999 (1.4% and 0.4%, respectively). Dairy cows were more frequently lame in 2007 (48.7%) than 1999 (39.2%) whereas beef cows had numerically less lameness (16.3% vs. 26.6%, respectively). Most beef cows (62.3%) and dairy cows (68.9%) received midpoint body condition scores (3, 4, and 5 for beef; 2 and 3 for dairy). Beef cows had higher numerical percentages of no defects present (72.0%) versus dairy cows (63.0%) when evaluated for a variety of reproductive, health, or management conditions. Continued improvements in several key factors related to transportation, management, and health were observed in this survey, which could result in increased value in market beef and dairy cows and bulls.

National Beef Tenderness Survey-2010: Warner-Bratzler shear force values and sensory panel ratings for beef steaks from United States retail and food service establishments.

The tenderness and palatability of retail and food service beef steaks from across the United States (12 cities for retail, 5 cities for food service) were evaluated using Warner-Bratzler shear (WBS) and consumer sensory panels. Subprimal postfabrication storage or aging times at retail establishments averaged 20.5 d with a range of 1 to 358 d, whereas postfabrication times at the food service level revealed an average time of 28.1 d with a range of 9 to 67 d. Approximately 64% of retail steaks were labeled with a packer/processor or store brand. For retail, top blade had among the lowest (P < 0.05) WBS values, whereas steaks from the round had the greatest (P < 0.05) values. There were no differences (P > 0.05) in WBS values between moist-heat and dry-heat cookery methods for the top round and bottom round steaks or between enhanced (contained salt or phosphate solution) or nonenhanced steaks. Food service top loin and rib eye steaks had the lowest (P < 0.05) WBS values compared with top sirloin steaks. Retail top blade steaks and food service top loin steaks received among the greatest (P < 0.05) consumer sensory panel ratings compared with the other steaks evaluated. Prime food service rib eye steaks received the greatest ratings (P < 0.05) for overall like, like tenderness, tenderness level, like juiciness, and juiciness level, whereas ungraded rib eye steaks received the lowest ratings (P < 0.05) for like tenderness and tenderness level. The WBS values for food service steaks were greater (P < 0.05) for the Select and ungraded groups compared with the Prime, Top Choice, and Low Choice groups. The WBS values and sensory ratings were comparable to the last survey, signifying that no recent or substantive changes in tenderness have occurred.

Effects of transition metal substitutions on the incommensurability and spin fluctuations in BaFe2As2 by elastic and inelastic neutron scattering.

The spin fluctuation spectra from nonsuperconducting Cu-substituted, and superconducting Co-substituted, BaFe(2)As(2) are compared quantitatively by inelastic neutron scattering measurements and are found to be indistinguishable. Whereas diffraction studies show the appearance of incommensurate spin-density wave order in Co and Ni substituted samples, the magnetic phase diagram for Cu substitution does not display incommensurate order, demonstrating that simple electron counting based on rigid-band concepts is invalid. These results, supported by theoretical calculations, suggest that substitutional impurity effects in the Fe plane play a significant role in controlling magnetism and the appearance of superconductivity, with Cu distinguished by enhanced impurity scattering and split-band behavior.

Genomic-polygenic evaluation of Angus-Brahman multibreed cattle for feed efficiency and postweaning growth using the Illumina 3K chip.

The objectives of this study were to determine the fraction of additive genetic variance explained by the SNP from the Illumina Bovine3K chip; to compare the ranking of animals evaluated with genomic-polygenic, genomic, and polygenic models; and to assess trends in predicted values from these 3 models for residual feed intake (RFI), daily feed intake (DFI), feed conversion ratio (FCR), and postweaning BW gain (PWG) in a multibreed Angus-Brahman cattle population under subtropical conditions. Data consisted of phenotypes and genotypes from 620 bulls, steers, and heifers ranging from 100% Angus to 100% Brahman. Phenotypes were collected in a GrowSafe automated feeding facility (GrowSafe Systems, Ltd., Airdrie, Alberta, Canada) from 2006 to 2010. Variance components were estimated using single-trait genomic-polygenic mixed models with option VCE (Markov chain Monte Carlo) of the program GS3. Fixed effects were contemporary group (year-pen), age of dam, sex of calf, age of calf, Brahman fraction of calf, and heterozygosity of calf. Random effects were additive SNP, animal polygenic, and residual effects. Genomic predictions were computed using a model without polygenic effects and polygenic predictions with a model that excluded additive SNP effects. Heritabilities were 0.20 for RFI, 0.31 for DFI, 0.21 for FCR, and 0.36 for PWG. The fraction of the additive genetic variance explained by SNP in the Illumina 3K chip was 15% for RFI, 11% for DFI, 25% for FCR, and 15% for PWG. These fractions will likely differ in other multibreed populations. Rank correlations between genomic-polygenic and polygenic predictions were high (0.95 to 0.99; P < 0.0001), whereas those between genomic-polygenic and genomic predictions were low (0.65 to 0.74; P < 0.0001). Genomic-polygenic, genomic, and polygenic predictions for all traits tended to decrease as Brahman fraction increased, indicating that calves with greater Brahman fraction were more efficient but grew more slowly than calves with greater Angus fraction. Predicted SNP values were small for all traits, and those above and below 0.2 SNP SD were in multiple chromosomes, supporting the contention that quantitative traits are determined by large numbers of alleles with small effects located throughout the genome.

Genetic effects on carcass quantity, quality, and palatability traits in straightbred and crossbred Romosinuano steers.

The objectives of this work were to estimate heterosis and breed genetic effects for carcass quantity, quality, and palatability traits of steers (Bos spp.) produced from matings of Romosinuano, Brahman, and Angus cattle. Steers (n = 464) were weaned at 7 mo of age and transported to the Southern Great Plains where they grazed winter wheat for 6 mo and were then fed a finishing diet until serial slaughter after different days on feed (average 130 d). Carcass quality and quantity traits were measured; steaks (aged 7 d) were obtained for palatability evaluation. Heterosis was detected for BW, HCW, dressing percentage, LM area, and yield grade for all pairs of breeds. Generally, Romosinuano-Angus heterosis estimates were smallest, Romosinuano-Brahman estimates were intermediate, and Brahman-Angus heterosis estimates were largest. The direct Romosinuano effect was to decrease (P < 0.05) BW (-67 ± 16 kg), HCW (-48 ± 10 kg), dressing percentage (-1.4 ± 0.5 units), 12th rib fat thickness (-5.2 ± 0.8 mm), and yield grade (-0.9 ± 0.1), and to increase LM area per 100 kg HCW (3.6 ± 0.3 cm(2)/100 kg). Significant Brahman direct effects were detected for BW (34 ± 17 kg), HCW (29 ± 10 kg), dressing percentage (1.6 ± 0.6 %), LM area per 100 kg HCW (-3.3 ± 0.4 cm(2)/100 kg), and yield grade (0.6 ± 0.1). Significant Angus direct effects were to increase 12th rib fat thickness (3.8 ± 1 mm). Among sire breed means, Romosinuano had reduced (P = 0.002) marbling score (393 ± 9) than Angus, but greater mean sensory tenderness scores (5.8 ± 0.1), and reduced percentage Standard carcasses (10 ± 2%) than Brahman (P < 0.002). Angus sire breed means for marbling score (475 ± 10), overall tenderness (5.8 ± 0.1), and percentage Choice carcasses (75 ± 5%) were greater (P < 0.05) than Brahman sire breed means (360 ± 11, 5.4 ± 0.1, 31 ± 5%). From consideration only of characteristics of the end product of beef production, Romosinuano did not provide a clearly superior alternative to Brahman for U.S. producers, as they had some quality and palatability advantages relative to Brahman, but at lighter HCW.

Carcass and meat palatability breed differences and heterosis effects in an Angus-Brahman multibreed population.

Additive genetic Angus-Brahman differences, heterosis effects, and least squares means for six carcass and six meat palatability traits were estimated using data from 1367 steers from the Angus-Brahman multibreed herd of the University of Florida collected from 1989 to 2009. Brahman carcasses had higher dressing percent (P<0.0001), lower marbling (P<0.0001), smaller ribeye area (P<0.0001), and less fat over the ribeye (P<0.0001) than Angus carcasses. Brahman beef was less tender (P<0.0001), had more connective tissue (P<0.0001), and it was less juicy (P<0.001) than Angus beef. Heterosis increased hot carcass weight (P<0.0001), dressing percent (P<0.017), ribeye area (P<0.0001), fat over the ribeye (P<0.0001), and kidney, pelvic, and heart fat (P<0.01) in Angus-Brahman crossbred steers. Results indicated that crossbred animals with up to 50% Brahman showed limited negative impact on meat quality while maximizing meat yield due to heterosis.

Chemically mediated quantum criticality in NbFe2.

Laves-phase Nb(1+c)Fe(2-c) is a rare itinerant intermetallic compound exhibiting magnetic quantum criticality at c(cr)∼1.5%Nb excess; its origin, and how alloying mediates it, remains an enigma. For NbFe(2), we show that an unconventional band critical point above the Fermi level E(F) explains most observations and that chemical alloying mediates access to this unconventional band critical point by an increase in E(F) with decreasing electrons (increasing %Nb), counter to rigid-band concepts. We calculate that E(F) enters the unconventional band critical point region for c(cr) > 1.5%Nb and by 1.74%Nb there is no Nb site-occupation preference between symmetry-distinct Fe sites, i.e., no electron-hopping disorder, making resistivity near constant as observed. At larger Nb (Fe) excess, the ferromagnetic Stoner criterion is satisfied.

Effect of ractopamine-HCl supplementation for 28 days on carcass characteristics, muscle fiber morphometrics, and whole muscle yields of six distinct muscles of the loin and round.

This study evaluated the effects of ractopamine-HCl (RAC) supplementation on carcass characteristics, muscle fiber morphometrics, and tenderness. Thirty-four steers (2 groups, 4 replicates) were fed RAC or carrier for 28 days prior to harvest. Seventy-two hours postmortem, the Longissimus lumborum (LL), Gracilis (GRA), Vastus lateralis (VL), Rectus femoris (RF), Semimembranosus (SM), and Adductor (ADD) were dissected from each carcass. Commodity weight, denuded weight, and muscle dimensions were collected. RAC supplementation tended to affect dressing percentage (P=0.15) and muscle firmness (P<0.15), and significantly affected lean maturity (P<0.05) and marbling score (P<0.05). With the exception of the LL and GRA (P<0.05), RAC had no effect on muscle dimensions. RAC did not influence the tenderness of vacuum-packaged, aged steaks as measured by Warner-Bratzler shear force. Muscle fiber size within the six muscles was unchanged (P>0.05) by RAC. Thus, RAC improves carcass parameters without a negative impact on tenderness.

Recent advances in the study of structural materials compatibility with hydrogen.

Hydrogen is a ubiquitous element that enters materials from many different sources. It almost always has a deleterious effect on mechanical properties. In non-hydride-forming systems, research to date has identified hydrogen-enhanced localized plasticity and hydrogen-induced decohesion as two viable mechanisms for embrittlement. However, a fracture prediction methodology that associates macroscopic parameters with the degradation mechanisms at the microscale has not been established, as of yet. In this article, we report recent work on modeling and simulation of hydrogen-induced crack initiation and growth. Our goal is to develop methodologies to relate characteristics of the degradation mechanisms from microscopic observations and first-principles calculations with macroscopic indices of embrittlement. The approach we use involves finite element analysis of the coupled hydrogen transport problem with hydrogen-assisted elastoplastic deformation, thermodynamic theories of decohesion, and ab initio density functional theory calculations of the hydrogen effect on grain boundaries.

Surface geometry of C(60) on Ag(111).

The geometry of adsorbed C(60) influences its collective properties. We report the first dynamical low-energy electron diffraction study to determine the geometry of a C(60) monolayer, Ag(111)-(2 square root of 3 x 2 square root of 3) 30 degrees -C(60), and related density functional theory calculations. The stable monolayer has C(60) molecules in vacancies that result from the displacement of surface atoms. C(60) bonds with hexagons down, with their mirror planes parallel to that of the substrate. The results indicate that vacancy structures are the rule rather than the exception for C(60) monolayers on close-packed metal surfaces.

Effect of breed composition on phenotypic residual feed intake and growth in Angus, Brahman, and Angus x Brahman crossbred cattle.

The influence of additive and nonadditive genetic effects and temperament on 4 postweaning feed intake and growth traits was evaluated in a group of 581 bull, heifer, and steer calves born in 3 Florida herds in 2006 and 2007. Calves had breed compositions ranging from 100% Angus (A) to 100% Brahman (B). They were randomly allocated to 24 pens each year by herd (Brooksville, Gainesville, Marianna, FL), sire group (A, 3/4 A 1/4 B, Brangus, 1/2 A 1/2 B, 1/4 A 3/4 B, and B), and sex (bull, heifer, and steer) in a GrowSafe automated feeding facility at Marianna. Calves were fed a concentrate diet during the 21-d adjustment and the 70-d trial periods. Individual feed intakes were recorded daily, and BW, chute scores, and exit velocities were recorded every 2 wk. Traits were phenotypic daily residual feed intake (RFI), mean daily feed intake (DFI), mean daily feed conversion ratio (FCR), and postweaning BW gain. Phenotypic RFI was computed as the difference between actual and expected feed intakes. Calves were assigned to 3 RFI groups: high (RFI greater than 0.9 kg of DM/d), low (RFI less than -0.9 kg of DM/d), and medium (RFI between mean +/- 0.9 kg of DM/d; SD = 1.8 kg of DM/d). The mixed model included the fixed effects of contemporary group (herd-year-pen), RFI group (except when trait was RFI), age of dam, sex of calf, age of calf, B fraction of calf, heterozygosity of calf, mean chute score, and mean exit velocity. Brahman fraction and heterozygosity of calf were nested within sex of calf for RFI and within RFI group for DFI, FCR, and postweaning BW gain. Random effects were sire and residual. Feed efficiency tended to improve (decreased RFI) as the B fraction increased. However, calves required larger amounts of feed per kilogram of BW gain (larger FCR) as the B fraction increased. Postweaning BW gain tended to decrease as the B fraction increased. Temperament traits were unimportant for all traits except exit velocity for DFI, suggesting perhaps a lack of variation for temperament traits in this herd, or that calves became accustomed to the level of handling pre- and postweaning, thus decreasing behavioral differences among them.