Nano-scale charge trapping memory based on two-dimensional conjugated microporous polymer.

There is a growing interest in new semiconductor nanostructures for future high-density high-performance flexible electronic devices. Two-dimensional conjugated microporous polymers (2D-CMPs) are promising candidates because of their inherent optoelectronic properties. Here, we are reporting a novel donor-acceptor type 2D-CMP based on Pyrene and Isoindigo (PI) for a potential nano-scale charge-trapping memory application. We exfoliated the PI polymer into ~ 2.5 nm thick nanoparticles (NPs) and fabricated a Metal-Insulator-Semiconductor (MIS) device with PI-NPs embedded in the insulator. Conductive AFM (cAFM) is used to examine the confinement mechanism as well as the local charge injection process, where ultrathin high-κ alumina supplied the energy barrier for confining the charge carrier transport. We have achieved a reproducible on-and-off state and a wide memory window (ΔV) of 1.5 V at a relatively small reading current. The device displays a low operation voltage (V < 1 V), with good retention (104 s), and endurance (103 cycles). Furthermore, a theoretical analysis is developed to affirm the measured charge carriers' transport and entrapment mechanisms through and within the fabricated MIS structures. The PI-NPs act as a nanoscale floating gate in the MIS-based memory with deep trapping sites for the charged carriers. Moreover, our results demonstrate that the synthesized 2D-CMP can be promising for future low-power high-density memory applications.

A Rational Design of Isoindigo-Based Conjugated Microporous n-Type Semiconductors for High Electron Mobility and Conductivity.

The development of n-type organic semiconductors has evolved significantly slower in comparison to that of p-type organic semiconductors mainly due to the lack of electron-deficient building blocks with stability and processability. However, to realize a variety of organic optoelectronic devices, high-performance n-type polymer semiconductors are essential. Herein, conjugated microporous polymers (CMPs) comprising isoindigo acceptor units linked to benzene or pyrene donor units (BI and PI) showing n-type semiconducting behavior are reported. In addition, considering the challenges of deposition of a continuous and homogeneous thin film of CMPs for accurate Hall measurements, a plasma-assisted fabrication technique is developed to yield uniform thin films. The fully conjugated 2D networks in PI- and BI-CMP films display high electron mobility of 6.6 and 3.5 cm2 V-1 s-1 , respectively. The higher carrier concentration in PI results in high conductivity (5.3 mS cm-1 ). Both experimental and computational studies are adequately combined to investigate structure-property relations for this intriguing class of materials in the context of organic electronics.

A review on the pesticides in coffee: Usage, health effects, detection, and mitigation.

Coffee is considered among the most popular beverages and is classified as the second most exported item worldwide. The presence of pesticides in this staple commodity is a challenge to import and export activities, in addition to the fact that pesticides are toxins of public health concern. Even if pesticides are applied properly and their residues are within the acceptable range, it is important to know the fate of these pesticides prior to their ingestion. A plethora of research has been done to optimize methods and thus to have valid procedures to test for the presence of pesticides in coffee. In this review, the analytical methods used in these articles to detect and quantify the pesticides in coffee beans, roasted coffee, and coffee infusion were identified. This review highlights as well the main factors that play a key role in having good separation, identification, and recovery of pesticide residues in the aforementioned items. In addition, the review explains the effect of pesticides on human health and the mitigation techniques for pesticide exposure.

Carcinogenic and neurotoxic risks of acrylamide consumed through bread, kaak, toast, and crackers among the Lebanese Population.

The present study deals with the assessment of acrylamide levels, dietary intake and toxicity associated with food products which constitute the main components of a Lebanese breakfast including bread, crackers, toast and kaak. Quantification of acrylamide levels was performed on a UPLC-MS/MS spectrometer and upon correlation with the results of a community survey, the carcinogenic and neurotoxic risks associated with the dietary intake of acrylamide were calculated. The average exposure to acrylamide from the investigated dietary products was found to be 5 times higher than the intake of 0.08 µg/kg-bw/day, as estimated by the NFCA (Norwegian Food Control Authority) and 3 times higher than the intake of 0.14 µg/kg-bw/day as set by the WHO (World Health Organization). MOEN and MOEC (Margin of Exposure for neurotoxic and carcinogenic risks) values ranged between 290 and 556, and between 449 and 861 respectively. Kaak, Crackers, and Toast appear to pose no neurotoxic or carcinogenic risk of concern among the entire population as well as the individual age groups. French bread and Lebanese bread pose different levels of carcinogenic risk among the entire population as well as various age groups. The results also indicate that 24% of children, 4% of young adults and 8% of adults are at both neurotoxic and carcinogenic risks.

Metallated Isoindigo-Porphyrin Covalent Organic Framework Photocatalyst with a Narrow Band Gap for Efficient CO2 Conversion.

Photocatalytic CO2 reduction into formate (HCOO-) has been widely studied with semiconductor and molecule-based systems, but it is rarely investigated with covalent organic frameworks (COFs). Herein, we report a novel donor-acceptor COF named Co-PI-COF composed of isoindigo and metallated porphyrin subunits that exhibits high catalytic efficiency (∼50 µmol formate g-1 h-1) at low-power visible-light irradiation and in the absence of rare metal cocatalysts. Density functional theory calculations and experimental diffuse-reflectance measurements are used to explain the origin of catalytic efficiency and the particularly low band gap (0.56 eV) in this material. The mechanism of photocatalysis is also studied experimentally and is found to involve electron transfer from the sacrificial agent to the excited Co-PI-COF. The observed high-efficiency conversion could be ascribed to the enhanced CO2 adsorption on the coordinatively unsaturated cobalt centers, the narrow band gap, and the efficient transfer of the charge originating from the postsynthetic metallation. It is anticipated that this study will pave the way toward the design of new simple and efficient catalysts for photocatalytic CO2 reduction into useful products.

Carcinogenic and neurotoxic risks of dietary acrylamide consumed through cereals among the Lebanese population.

The present study aims to determine the carcinogenic and neurotoxic risks associated with acrylamide intake from cereal products. Analysis on a UPLC-MS/MS spectrometer revealed that oat-based and mixed cereals contain the highest amount of acrylamide among cereal products with levels as high as 271 and 348 µg/kg, respectively. Children were shown to exhibit both carcinogenic and neurotoxic risks regardless of the type of cereal product consumed. For adults above 50 years of age, only consumers of oat-based cereal products seem to exhibit carcinogenic and neurotoxic risks. To avoid a carcinogenic and neurotoxic risk among the Lebanese population, we propose that food processors set the maximum tolerable concentration for acrylamide in cereal products at 94.8 µg/kg product, a value which is threefolds lower than the average acrylamide levels found in this study. Alternatively, and unreasonably, the average Lebanese population and children among the Lebanese population may choose to cut down on cereal consumption by 1.7- and 7.2-folds respectively, should they want to avoid a health hazard as a result of acrylamide intake. The industry should also respond by optimizing the production process in a way to reduce acrylamide levels in cereals.

Synthesis, characterization and third-order nonlinear optical properties of a dodecaruthenium organometallic dendrimer with a zinc(ii) tetraphenylporphyrin core.

A new Zn(ii) porphyrin-based dendrimer (52) containing twelve Ru(ii) alkynyl fragments, has been prepared following a convergent approach in two steps from 5,10,15,20-tetra(4-ethynylphenyl)porphyrinatozinc(ii) (6). The cubic nonlinear optical (NLO) properties of 52 and other derivatives of 6 have been measured by third-harmonic generation (THG) at 1907 nm and by Z-scan over the spectral range 500-1700 nm, revealing the remarkable NLO response of 52 in the near-IR range. These results highlight the beneficial role of the extended "cross fourchée"-like polymetallic structure of 52 on its third-order NLO properties.

Carcinogenic and neurotoxic risks of acrylamide consumed through caffeinated beverages among the lebanese population.

The present study aims to quantify acrylamide in caffeinated beverages including American coffee, Lebanese coffee, espresso, instant coffee and hot chocolate, and to determine their carcinogenic and neurotoxic risks. A survey was carried for this purpose whereby 78% of the Lebanese population was found to consume at least one type of caffeinated beverages. Gas Chromatography Mass Spectrometry analysis revealed that the average acrylamide level in caffeinated beverages is 29,176 µg/kg sample. The daily consumption of acrylamide from Lebanese coffee (10.9 µg/kg-bw/day), hot chocolate (1.2 µg/kg-bw/day) and Espresso (7.4 µg/kg-bw/day) was found to be higher than the risk intake for carcinogenicity and neurotoxicity as set by World Health Organization (WHO; 0.3-2 µg/kg-bw/day) at both the mean (average consumers) and high (high consumers) dietary exposures. On the other hand, American coffee (0.37 µg/kg-bw/day) was shown to pose no carcinogenic or neurotoxic risks among the Lebanese community for consumers with a mean dietary exposure. The study shows alarming results that call for regulating the caffeinated product industry by setting legislations and standard protocols for product preparation in order to limit the acrylamide content and protect consumers. In order to avoid carcinogenic and neurotoxic risks, we propose that WHO/FAO set acrylamide levels in caffeinated beverages to 7000 µg acrylamide/kg sample, a value which is 4-folds lower than the average acrylamide levels of 29,176 µg/kg sample found in caffeinated beverages sold in the Lebanese market. Alternatively, consumers of caffeinated products, especially Lebanese coffee and espresso, would have to lower their daily consumption to 0.3-0.4 cups/day.

Ruthenium Carbon-Rich Complexes as Redox Switchable Metal Coupling Units.

With the help of EPR spectroscopy, we show that the diamagnetic [Ru(dppe)2(-C≡C-R)2] system sets up a magnetic coupling between two organic radicals R, i.e., two nitronyl nitroxide or two verdazyl units, which is stronger than that of related platinum organometallic systems. Surprisingly, further oxidation of the ruthenium redox-active metal coupling unit (MCU), which introduces an additional spin unit on the carbon-rich part, leads to the switching off of this interaction. On the contrary, in simpler complexes bearing only one of the organic radical ligands [C6H5-C≡C-Ru(dppe)2-C≡C-R], one-electron oxidation of the transition metal unit generates an interaction between the two spin carriers of comparable magnitude to that observed in the above corresponding neutral systems.

New donor-acceptor conjugates based on a trifluorenylporphyrin linked to a redox-switchable ruthenium unit.

Reactions of the 16-electron ruthenium complex [Ru(dppe)2Cl][PF6] with metal-free and zinc ethynylphenyltrifluorenylporphyrins and respectively, gave the new dyads and with ethynylruthenium group as a potential electron donor and the porphyrin as a potential electron acceptor. The redox properties of the porphyrins were investigated by cyclic voltammetry and UV spectroelectrochemistry (SEC), which reveal that the monocation and monoanion of metal-free porphyrin are stable under these conditions whereas the formation of the corresponding radical cation or anion of the zinc porphyrin was accompanied by partial decomplexation of the zinc ion. Oxidations of the dyads and gave stable radical cations as probed using IR, NIR and UV SEC methods. These cations show similar NIR and IR bands to those reported for the known 17-electron [Ru(dppe)2(C[triple bond, length as m-dash]CPh)Cl](+) radical cation. Remarkably, the dyad has four stable redox states +2/+1/0/-1 where the second oxidation and first reduction processes take place at the porphyrin unit. Simulated absorption spectra on at optimised geometries obtained by TD-DFT computations with the CAM-B3LYP functional are shown to be in very good agreement with the observed UV absorption spectra of . The spectra of and their oxidised and reduced species were interpreted with the aid of the TD-DFT data. Fluorescence measurements reveal that the dyads and are only weakly emitting compared to and , indicative of quenching of the porphyrinic singlet excited state by the ruthenium centre.

A hybrid ruthenium alkynyl/zinc porphyrin "Cross Fourchée" with large cubic NLO properties.

A new Zn(ii) porphyrin-cored ruthenium alkynyl dendrimer (2) containing twelve Ru(κ(2)-dppe)2 bis-alkynyl fragments has been prepared in two steps from 5,10,15,20-tetra(4-ethynylphenyl)porphyrinatozinc(ii) and shown to be highly active for third-harmonic generation (THG) at 1907 nm.