An integrative review of Açaí (Euterpe oleracea and Euterpe precatoria): Traditional uses, phytochemical composition, market trends, and emerging applications.

The increasing trade and popularity of açaí prompt this review. Therefore, it is imperative to provide an overview of the fruit's characteristics and the available data on its marketing, research, and products derived from its pulp and seeds to comprehend the current state of the açaí industry. Concerning food applications, it was observed that there is still room for developing processes that effectively preserve the bioactive compounds of the fruit while also being economically feasible, which presents an opportunity for future research. A notable research trend has been focused on utilizing the fruit's seeds, a byproduct of açaí processing, which is still considered a significant technological challenge. Furthermore, the studies compiled in this review attest to the industry's considerable progress and ongoing efforts to demonstrate the various properties of açaí, driving the sector's exponential growth in Brazil and worldwide.

Biochar production from microalgae: a new sustainable approach to wastewater treatment based on a circular economy.

The generation of wastewater due to human activities are the main responsible for environmental problems. These problems are caused by the large amount of organic and inorganic pollutants related to the presence of pesticides, metals, pathogens, drugs and dyes. The photosynthetic treatment of effluents emerges as a sustainable and low-cost alternative for developing wastewater treatment systems based on a circular economy. Chemical compounds present in wastewater can be recovered and reused as a source of nutrients in microalgae cultivation to produce value-added bioproducts. The microalgal biomass produced in the cultivation with effluents has the potential to produce biochar. Biochar is carbon-rich charcoal that can be obtained by converting microalgae biomass through thermal decomposition of organic raw material under limited oxygen supply conditions. Pyrolysis, torrefaction, and hydrothermal carbonization are processes used for biochar synthesis. The application of microalgal biochar as an adsorbent material to remove several compounds present in effluents is an effective and fast treatment. This effectiveness is usually related to the unique physicochemical characteristics of the biochar, such as the presence of functional groups, ion exchange capacity, thermal stability, and high surface area, volume, and pore area. In addition, biochar can be reused in the adsorption process or applied in agriculture for soil correction. In this context, this review article describes the production, characterization, and use of microalgae biochar through a sustainable approach to wastewater treatment, emphasizing its potential in the circular economy. In addition, the article approaches the potential of microalgal biochar as an adsorbent material and its reuse after the adsorption of contaminants, as well as highlights the challenges and future perspectives on this topic.

Use of exogenous substrate in Chlorella cultivation: Strategy for biomass and polyhydroxybutyrate production.

The aim of this study was to investigate the influence of exogenous carbon supplementation and nitrogen source reduction on Chlorella fusca LEB 111 growth, biomass composition, and polyhydroxybutyrate accumulation. First, assays were performed with 50 % and 25 % reduced nitrogen source concentrations (NaNO3). In the second stage, the influence of culture supplementation with 10, 20, and 30 mg L-1 D-xylose, associated with 50 and 25 % reductions in NaNO3, was evaluated. The experiments conducted with a 25 % reduction in NaNO3 and supplementation with 10 mg L-1 D-xylose resulted in a positive effect on the biomass productivity of C. fusca LEB 111, with production as high as 354.4 mg L-1 d-1. The maximum concentration of PHB extracted from C. fusca LEB 111 was 3.7 % (w w-1) and was obtained when the microalgae were cultivated with a 25 % of reduction in NaNO3 and supplementation of D-xylose at 20 mg L-1. Therefore, this study brings new perspectives regarding reducing the use of nutritional sources and using exogenous carbon sources in using microalgae to produce molecules of high biotechnological potential.

Cost Reduction in the Production of Spirulina Biomass and Biomolecules from Indole-3-Acetic Acid Supplementation in Different Growth Phases.

Despite the great potential for the industrial application of microalgae, production costs are still too high to make them a competitive raw material for commodities. Therefore, studying more efficient cultivation strategies in biomass production and economic viability is necessary. In this sense, this work aimed to reduce the production costs of biomass and biomolecules using phytohormone indole-3-acetic acid in different phases of Spirulina sp. LEB 18 cultivation. The experiments were conducted on bench scale indoor for 30 days. In each couple of experiments, the phytohormone was added on different days. The supplementation of indole-3-acetic acid on half of the growth deceleration phase of the microalga showed a cost reduction of 27%, 34%, and 75% for biomass, proteins, and carbohydrates, respectively. In addition, the strategy increased the final biomass concentration and carbohydrate content at 31.2 and 33.8%, respectively, compared to the condition without phytohormone. This study is the starting point for implementing phytohormone supplementation in industrial microalgal cultures.

Renewal of nanofibers in Chlorella fusca microalgae cultivation to increase CO2 fixation.

This study explored strategies to increase the CO2 fixation ability of microalgae by renewing polymeric nanofibers in cultures of Chlorella fusca LEB 111. Nanofibers composed of 10% (w v-1) polyacrylonitrile (PAN)/dimethylformamide (DMF) containing 4% (w v-1) iron oxide nanoparticles (NPsFe2O3) were added to photobioreactors. The nanomaterial was renewed in the test cultures as follows: renewal only on day 7; renewal only on day 15; or renewal on both days 7 and 15 (i.e., double renewal). The highest biomass concentration (2.53 g L-1) and CO2 biofixation rate (141.5 mg L-1 d-1) were obtained by cultivating with double renewal, resulting in values 21.6% and 23% higher, respectively, than those obtained by cultivation without renewal. The application of nanofiber renewal in the cultivation of C. fusca LEB 111 shows the potential to increase CO2 biofixation, which may contribute to reducing the atmospheric concentrations of this main greenhouse gas intensifier.

Polyhydroxybutyrate production and increased macromolecule content in Chlamydomonas reinhardtii cultivated with xylose and reduced nitrogen levels.

The aim of the current study was to evaluate the production of macromolecules such as polyhydroxybutyrate under pentose supplementation and reduced nitrogen levels in Chlamydomonas reinhardtii. Two batches of experiments were carried out: (1) reduction in the nitrogen (NH4Cl) concentration to 6 and 4 g L-1 and (2) supplementation of 10, 20 and 30 mg L-1 D-xylose together with a reduction in the NH4Cl concentration (6 and 4 g L-1). The addition of 20 mg L-1 D-xylose together with 6 g L-1 NH4Cl resulted in polyhydroxybutyrate production (206.0 mg L-1). The reduction of 8 to 6 g L-1 NH4Cl did not trigger a reduction in the production of either proteins (68.3% w w-1) or carbohydrates (23.3% w w-1) in the cells. The current study demonstrated that nutritional modifications, which until now have been unexplored in C. reinhardtii, triggered the production of macromolecules (polymers, carbohydrates and proteins) with high biotechnological potential.

Development of a colorimetric pH indicator using nanofibers containing Spirulina sp. LEB 18.

A colorimetric pH indicator was developed using nanofibers of poly(lactic acid) (PLA) and polyethylene oxide (PEO) combined with biomass of the microalga Spirulina sp. LEB 18. This study evaluates the potential use of microalgal biomass encapsulated in polymer nanofibers to develop a colorimetric pH indicator. Nanofibers containing the biomass were exposed to solutions with different pH values (pH 1-10), and color variations were measured using a colorimeter. The wettability analysis of the nanofibers showed hydrophilicity (zero angle with water), which allows ions to interact with the biomass, indicating a fast color response as a function of pH. When subjected to pH variations, indicators containing 1, 2 or 3% (w v-1) of biomass provided ΔΕ values >12, indicating an absolute difference in color. Therefore, this innovative material has the potential to be applied as a intelligent indicator to verify food quality through a visual signal of the product condition.

Role of light emitting diode (LED) wavelengths on increase of protein productivity and free amino acid profile of Spirulina sp. cultures.

LEDs have specific wavelengths that can positively influence the production of microalga biomass and biomolecules of interest. Filling the gaps in the literature, this study evaluated the effect of different LED wavelengths and photoperiods on protein productivities and free amino acid (FAA) profile of Spirulina sp. LEB 18 cultures. The best protein productivity results were obtained in red and green LED cultures using integral and partial photoperiods, respectively. In these experiments, protein productivities increased 2 and 1.6 times, respectively, compared to the control culture using fluorescent light. Green LEDs in partial photoperiod provided also the highest concentrations of essential and non-essential FAA, about 1.8 and 2.3 times higher, respectively, than control cultures. LEDs showed to be a promising sustainable light source for increasing protein productivity and FAA concentration in Spirulina sp. LEB 18 cultures.

Progress in the physicochemical treatment of microalgae biomass for value-added product recovery.

Interest in microalgae-derived products is growing, mostly due to their unique characteristics and range of industrial applications. To obtain different products, one must employ specific pretreatments that retain the properties of the biologically active compounds extracted from microalgae biomass; thus, new extraction techniques require frequent upgrades. Due to increased interest in economically viable and ecologically friendly processes, new extraction methods that can be incorporated into microalgae biorefinery systems have become the main focus of research. Therefore, this review aims to address the potential applications, future prospects, and economic scenario of the new physicochemical treatments used in the extraction of bioactive microalgae compounds.

Brackish Groundwater from Brazilian Backlands in Spirulina Cultures: Potential of Carbohydrate and Polyunsaturated Fatty Acid Production.

The composition of brackish groundwater from Brazilian backlands contains important elements necessary for metabolism in microalgae. This study evaluated the use of 100% brackish groundwater with different amounts of Zarrouk nutrients for Spirulina sp. LEB 18 cultivation. The growth parameters and biomass composition, including the concentrations of proteins, carbohydrates, ash, lipids, and fatty acids, were evaluated. The best growth parameter results were obtained in the assay using 100% brackish groundwater and only 25% of Zarrouk nutrients, which were equal to those obtained for the control culture. The concentrations of carbohydrates and polyunsaturated fatty acids were increased by as much as 4- and 3.3-fold, respectively, when brackish groundwater was used in the cultures. The lipid profile demonstrated that the biomass had the potential for use in biodiesel production. The use of brackish groundwater is a sustainable, economical way to obtain high-quality biomass for different applications during Spirulina sp. LEB 18 cultivation.

Microalgae starch: A promising raw material for the bioethanol production.

Ethanol is currently the most successful biofuel and can be produced from microalgal biomass (third-generation). Ethanol from microalgal biomass has advantages because it does not use arable land and reduces environmental impacts through the sequestration of CO2 from the atmosphere. In this way, micro and macroalgal starch, which is structurally similar to that from higher plants can be considered a promise raw material for the production of bioethanol. Thus, strategies can be used to intensify the carbohydrate concentration in the microalgal biomass enabling the production of third-generation bioethanol. The microalgae biomass can be destined to biorefineries so that the residual biomass generated from the extraction processes is used for the production of high value-added products. Therefore, the process will have an impact on reducing the production costs and the generation of waste. In this context, this review aims to bring concepts and perspectives on the production of third-generation bioethanol, demonstrating the microalgal biomass potential as a carbon source to produce bioethanol and supply part of the world energy demand. The main factors that influence the microalgal cultivation and fermentation process, as well as the processes of transformation of biomass into the easily fermentable substrate are also discussed.

Operational and economic aspects of Spirulina-based biorefinery.

Microalgae biorefinery systems have been extensively studied from the perspective of resources, energy expenditure, biofuel production potential, and high-added value products. The genus Spirulina (Arthrospira) stands out among the microalgae of commercial importance. It accounts for over 30% of biomass produced globally because of high protein concentration and, carotenoid and phycocyanin content. Spirulina cultivation can be used to reduce greenhouse gases and for effluent treatment. Furthermore, its cellular morphology facilitates biomass recovery, which contributes to the process cost reduction. Spirulina biomass is widely applicable in food, feed, cosmetics, biofertilizers, biofuels, and biomaterials. A feasibility analysis of Spirulina biorefinery would provide specific information for the decision-making for the improvement of the Spirulina production process. In that context, this review aimed to present a parameter assessment to contribute to the economic viability of Spirulina production in a biorefinery system.

Microalgae biosynthesis of silver nanoparticles for application in the control of agricultural pathogens.

The occurrence of diseases in cultivars has caused significant losses in global food production. The advancement of nanobiotechnology makes it possible to obtain new products to be used in the control of pathogens in cultivars. Silver nanoparticles can be synthesized by microalgae and are widely known for their antimicrobial activity. In addition, the biomass produced in microalgal culture for the biosynthesis of the nanoparticles also demonstrates antimicrobial properties, as it can increase the antibacterial and antifungal potential of the silver nanoparticles. In this context, this article addresses the use of microalgae to biosynthesize silver nanoparticles simultaneously with biomass production. In addition, we demonstrate the antimicrobial potential of these nanomaterials, as well as of the microalgal biomass produced in biosynthesis, to use in the control of pathogens in agriculture.

Innovative pH sensors developed from ultrafine fibers containing açaí (Euterpe oleracea) extract.

This work describes the development of ultrafine fibers with açaí (Euterpe oleracea Mart.) extract (AE) for use as pH sensors with potential applications in the food industry. The fibers were produced by electrospinning with polymeric solutions composed of 7% (w v-1) polycaprolactone, 2% (w v-1) polyethylene oxide and 3% (w v-1) AE solubilized in chloroform and methanol (3:1). The mean diameter of the fibers was 1635 ±â€¯277 nm, with hydrophilic characteristics (contact angle < 90°), a melting point of 58 °C and a maximum degradation temperature of 408 °C. The total color difference (ΔΕ) of the colorimetric response was greater than 5, corresponding to the human ability for color differentiation. This new material can be used as a pH sensor for foods such as pork and fish to ensure quality and safety for the consumer, who can visually check the condition of the products.

Green alga cultivation with nanofibers as physical adsorbents of carbon dioxide: Evaluation of gas biofixation and macromolecule production.

The objective of this study was to evaluate the biofixation and production of biocompounds by Chlorella fusca LEB 111 cultivated with different concentrations of carbon dioxide (CO2) adsorbent nanofibers in their free form or retained. Cultures were grown in 15% (v v-1) CO2 with 0.1, 0.3 and 0.5 g L-1 nanofibers developed with 10% (w v-1) polyacrylonitrile (PAN)/dimethylformamide (DMF), with or without nanoparticles; retained or not. The addition of 0.1 g L-1 nanofibers with nanoparticles in their free form to the cultures promoted the accumulation of approximately 3 times more carbon in the medium (46.6 mg L-1), a 45% higher biofixation rate (89.2 mg L-1 d-1) and increased carbohydrate production by approximately 2.3% (w w-1) of that observed in cultures grown without nanofibers. Therefore, nanofibers showed promising potential as physical adsorbents of CO2 in the cultivation to increase gas fixation and promote the synthesis of macromolecules.

Biological CO2 mitigation by microalgae: technological trends, future prospects and challenges.

The increase in the CO2 concentration in the Earth's atmosphere has been a topic of worldwide concern since anthropogenic emissions of greenhouse gases began increasing considerably during the industrial period. The effects of these mass emissions are probably the main cause of global warming, which has been observed over recent decades. Among the various techniques of CO2 capture, microalgal biofixation by photosynthesis is considered a promising technology due to the efficiency of these microorganisms in converting this gas into organic compounds through its use as a nutrient in the culture medium. Over the years, several research centers have developed studies on this subject, which have focused on mainly the development of bioreactors, the growth conditions that increase the efficiency of the process and the production of biomass with applicability in several areas. The biological mitigation of CO2 by microalgae has many advantages, including reductions in the concentration of an industrially sourced greenhouse gas and the energy or food obtained from the produced photosynthetic biomass. This versatility allows for the cultivation of economically useful biomass while reducing the environmental impacts of industrial facilities. In this context, this mini-review aims to discuss new technologies and strategies along with the main challenges and future prospects in the field and the ecological and economic impacts of CO2 biofixation by microalgae.

Microalgae as source of polyhydroxyalkanoates (PHAs) - A review.

Polyhydroxyalkanoates (PHA) are biopolymers synthesized by different microorganisms and considered substitute powers for petroleum-based plastics because they have similar mechanical properties as synthetic polymers, can be processed in a similar way and are fully biodegradable. Currently commercial PHAs are produced in fermenters using bacteria and large amounts of organic carbon sources and salts in the culture media, accounting for approximately 50% of the total production costs. A greater commercial application of the PHA is limited to a decrease in the cost of production. Several studies suggest that microalgae are a type of microorganisms that can be used to obtain PHAs at a lower cost because they have minimum nutrient requirements for growth and are photoautotrophic in nature, i.e. they use light and CO2 as their main sources of energy. Thus, this work aims to provide a review on the production of PHAs of different microalgae, focusing on the properties and composition of biopolymers, verifying the potential of using these bioplastics instead of petroleum based plastics. Studies of stimulation PHA synthesis by microalgae are still considered incipient. Still, it is clear that microalgae have the potential to produce biopolymers with lower cost and can play a vital role in the environment.

Potential of microalgae as biopesticides to contribute to sustainable agriculture and environmental development.

The loss of yields from agricultural production due to the presence of pests has been treated over the years with synthetic pesticides, but the use of these substances negatively affects the environment and presents health risks for consumers and animals. The development of agroecological systems using biopesticides represents a safe alternative that contributes to the reduction of agrochemical use and sustainable agriculture. Microalgae are able to biosynthesize a number of metabolites with potential biopesticidal action and can be considered potential biological agents for the control of harmful organisms to soils and plants. The present work aims to provide a critical perspective on the consequences of using synthetic pesticides, offering as an alternative the biopesticides obtained from microalgal biomass, which can be used together with the implementation of environmentally friendly agricultural systems.

Potential of Chlorella fusca LEB 111 cultivated with thermoelectric fly ashes, carbon dioxide and reduced supply of nitrogen to produce macromolecules.

Fly ashes present several minerals that along with carbon dioxide (CO2) represent a promising nutrient source and an alternative to reduce environmental problems. Thus, the objective of this study was to investigate if CO2, thermoelectric fly ashes and reduction in nitrogen supply alters the production of macromolecules in Chlorella fusca LEB 111. For this purpose, 1.5 or 0.75 g L-1 of NaNO3, injection of 10% (v v-1) of CO2 as well as 0, 40 and 120 ppm of fly ashes were studied. The protein content was not impaired in cultivations with 0.75 g L-1 of NaNO3 since nitrogen was not fully consumed. Nevertheless, this cultivation strategy increased carbohydrate content by up to 25%, which could be fermented to produce bioethanol. Therefore, Chlorella fusca presented not only potential for CO2 biofixation and assimilation of nutrients from fly ashes but also for enhancement of carbohydrates accumulation when the nitrogen supply was reduced.

Enhancement of the carbohydrate content in Spirulina by applying CO2, thermoelectric fly ashes and reduced nitrogen supply.

This study focused on evaluating whether the injection of CO2, which is associated with the use of thermoelectric fly ashes and a reduced supply of nitrogen, affects the production of intracellular carbohydrates from Spirulina. For this purpose, the addition of 0.25 g L-1 of NaNO3, along with a 10% (v v-1) of CO2 injection, a flow rate of 0.3 vvm for 1 or 5 min, as well as 0, 120 and 160 ppm of fly ashes, was studied. The assays with 120 ppm of fly ashes presented the best kinetic parameters and CO2 biofixation rate, regardless of the CO2 injection time. Meanwhile, the experiments with 120 and 160 ppm of fly ash and CO2 injection for 1 min presented 63.3 and 61.0% (w w-1) of carbohydrates, respectively. Thus, this study represents an important strategy to increase the accumulation of carbohydrates in Spirulina, with potential application in the production of bioethanol.