RESUMO
The Internet of Things (IoT) includes billions of sensors and actuators (which we refer to as IoT devices) that harvest data from the physical world and send it via the Internet to IoT applications to provide smart IoT services and products. Deploying, managing, and maintaining IoT devices for the exclusive use of an individual IoT application is inefficient and involves significant costs and effort that often outweigh the benefits. On the other hand, enabling large numbers of IoT applications to share available third-party IoT devices, which are deployed and maintained independently by a variety of IoT device providers, reduces IoT application development costs, time, and effort. To achieve a positive cost/benefit ratio, there is a need to support the sharing of third-party IoT devices globally by providing effective IoT device discovery, use, and pay between IoT applications and third-party IoT devices. A solution for global IoT device sharing must be the following: (1) scalable to support a vast number of third-party IoT devices, (2) interoperable to deal with the heterogeneity of IoT devices and their data, and (3) IoT-owned, i.e., not owned by a specific individual or organization. This paper surveys existing techniques that support discovering, using, and paying for third-party IoT devices. To ensure that this survey is comprehensive, this paper presents our methodology, which is inspired by Systematic Literature Network Analysis (SLNA), combining the Systematic Literature Review (SLR) methodology with Citation Network Analysis (CNA). Finally, this paper outlines the research gaps and directions for novel research to realize global IoT device sharing.
RESUMO
Line-of-sight (LOS) indoor optical wireless communications (OWC) enable a high data rate transmission while potentially suffering from optical channel obstructions. Additional LOS links using diversity techniques can tackle the received signal performance degradation, where channel gains often differ in multiple LOS channels. In this paper, a novel active transmitter detection scheme in spatial modulation (SM) is proposed to be incorporated with signal space diversity (SSD) technique to enable an increased OWC system throughput with an improved bit-error-rate (BER). This transmitter detection scheme is composed of a signal pre-distortion technique at the transmitter and a power-based statistical detection method at the receiver, which can address the problem of power-based transmitter detection in SM using carrierless amplitude and phase modulation waveforms with numerous signal levels. Experimental results show that, with the proposed transmitter detection scheme, SSD can be effectively provided with ~0.61 dB signal-to-noise-ratio (SNR) improvement. Additionally, an improved data rate ~7.5 Gbit/s is expected due to effective transmitter detection in SM. The SSD performances at different constellation rotation angles and under different channel gain distributions are also investigated, respectively. The proposed scheme provides a practical solution to implement power-based SM and thus aids the SSD realization for improving system performance.
RESUMO
In this paper, we propose a novel beam shaping technique based on orbital angular momentum (OAM) modes for indoor optical wireless communications (OWC). Furthermore, we investigate two spatial diversity techniques, namely repetition-coding (RC) and Alamouti-type orthogonal space-time-block-coding (STBC) for indoor OWC employing the new beam shaping technique. The performance of both diversity schemes is systematically analyzed and compared under different beam shaping techniques using different OAM modes with different power ratios of the modes. It is shown that both RC and STBC can improve the system performance and effective coverage and RC outperforms STBC in all the beam shaping techniques regardless of the power ratios of the different modes. In addition, to further understand the performance of RC and STBC schemes against the signal delays induced during OAM mode conversion, the system tolerance of the two schemes to the delay interval is investigated with different OAM mode-based beam shaping techniques. Numerical results show that higher resistance to the delay interval can be achieved in STBC scheme. The advantage is more obvious when employing OAM0 and OAM1 based beam shaping technique.
RESUMO
The Internet of Things (IoT) incorporates billions of IoT devices (e.g., sensors, cameras, wearables, smart phones, as well as other internet-connected machines in homes, vehicles, and industrial plants), and the number of such connected IoT devices is currently growing rapidly. This paper proposes a novel Autonomic Global IoT Device Discovery and Integration Service (which we refer to as aGIDDI) that permits IoT applications to find IoT devices that are owned and managed by other parties in IoT (which we refer to as IoT device providers), integrate them, and pay for using their data observations. aGIDDI incorporates a suite of interacting sub-services supporting IoT device description, query, integration, payment (via a pay-as-you-go payment model), and access control that utilise a special-purpose blockchain to manage all information needed for IoT applications to find, pay and use the IoT devices they need. The paper describes aGIDDI's novel protocol that allows any IoT application to discover and automatically integrate and pay for IoT devices and their data that are provided by other parties. The paper also presents aGIDDI's architecture and proof-of-concept implementation, as well as an experimental evaluation of the performance and scalability of aGIDDI in variety of IoT device integration and payment scenarios.
RESUMO
In this paper, we propose a scalable approach toward all-printed high-performance metal oxide thin-film transistors (TFTs), using a high-resolution electrohydrodynamic (EHD) printing process. Direct EHD micropatterning of metal oxide TFTs is based on diverse precursor solutions to form semiconducting materials (In2O3, In-Ga-ZnO (IGZO)), conductive metal oxide (Sn-doped In2O3 (ITO)), as well as aluminum oxide (Al2O3) gate dielectric at low temperatures. The fully printed TFT devices exhibit excellent electron transport characteristics (average electron mobilities of up to 117 cm2 V-1 s-1), negligible hysteresis, excellent uniformity, and stable operation at low-operating voltage. Furthermore, integrated logic gates such as NOT and NAND have been printed and demonstrated. All-printed logic with individual gating and symmetric input/output behavior, which is crucial for large-scale integration, is also demonstrated. The devices and fabrication process described in this paper enable high-performance and high-reliability transparent electronics.
RESUMO
Idealized passive dynamic walkers (PDW) exhibit limit cycle stability at steady state. Yet in reality, uncertainty in ground interaction forces result in variability in limit cycles even for a simple walker known as the Rimless Wheel (RW) on seemingly even slopes. This class of walkers is called metastable walkers in that they usually walk in a stable limit cycle, though guaranteed to eventually fail. Thus, control action is only needed if a failure state (i.e. RW stopping down the ramp) is imminent. Therefore, efficiency of estimating the time to reach a failure state is key to develop a minimal intervention controller to inject just enough energy to overcome a failure state when required. Current methods use what is known as a Mean First Passage Time (MFPT) from current state (rotary speed of RW at the most recent leg collision) to an arbitrary state deemed to be a failure in the future. The frequently used Markov chain based MFPT prediction requires an absorbing state, which in this case is a collision where the RW comes to a stop without an escape. Here, we propose a novel method to estimate an MFPT from current state to an arbitrary state which is not necessarily an absorbing state. This provides freedom to a controller to adaptively take action when deemed necessary. We demonstrate the proposed MFPT predictions in a minimal intervention controller for a RW. Our results show that the proposed method is useful in controllers for walkers showing up to 44.1% increase of time-to-fail compared to a PID based closed-loop controller.
Assuntos
Modelos Teóricos , Andadores , Cadeias de Markov , Método de Monte CarloRESUMO
We propose and experimentally demonstrate a non-orthogonal multiple access (NOMA) enabled 60 GHz radio-over-fiber (RoF) fronthaul system with coordinated base stations, improving the data rate and coverage of 60 GHz RoF systems. First, coordinated multipoint transmission using space-time block coding (STBC) is adopted in fronthaul, achieving 1.3 dB improvement in receiver sensitivity compared to two fronthaul links' transmission without STBC. Second, multi-cell coordination in RoF fronthaul is presented, where a multi-level code (MLC)-based NOMA scheme is employed. A sum rate of 6 Gbps for three users is achieved along 10 km fronthaul transmission and 1.24 m wireless transmission. The experimental results show that the valid power allocation ratio range improves from 3.5≤R≤4.2 in conventional superposition code-based NOMA fronthaul to 3≤R≤5 in our proposed coordinated MLC-NOMA fronthaul link.
RESUMO
Beam-steering-based optical wireless technologies are being widely investigated due to the capability of providing high-speed wireless connectivity in indoor applications. However, high-speed indoor optical wireless systems are traditionally realized with discrete bulky components, significantly limiting their practical applications. In this Letter, we demonstrate an infrared optical wireless communication system employing a miniaturized silicon integrated photonic circuit for beam steering for the first time. Experimental results show that up to 12.5 Gb/s optical wireless communication can be achieved with error-free performance over a free-space range of 140 cm, and limited mobility of users can be realized. The experimental results of this Letter open the way for realizing integrated high-speed optical wireless communications.
RESUMO
In this paper, we report a novel mechanism to simultaneously provide secure connections for multiple users in indoor optical wireless communication systems by employing the time-slot coding scheme together with chaotic phase sequence. The chaotic phase sequence is generated according to the logistic map and applied to each symbol to secure the transmission. Proof-of-concept experiments are carried out for multiple system capacities based on both 4-QAM and 16-QAM modulation formats, i.e. 1.25 Gb/s, 2 Gb/s and 2.5 Gb/s for 4-QAM, and 2.5 Gb/s, 3.33 Gb/s and 4 Gb/s for 16-QAM. Experimental results show that in all cases the added chaotic phase does not degrade the legitimate user's signal quality while the illegal user cannot detect the signal without the key.
RESUMO
The indoor user localization function is in high demand for high-speed wireless communications, navigations and smart-home applications. The optical wireless technology has been used to localize end users in indoor environments. However, its accuracy is typically very limited, due to the ambient light, which is relatively strong. In this paper, a novel high-localization-accuracy optical wireless based indoor localization system, based on the use of the mechanism that estimates background light intensity, is proposed. Both theoretical studies and demonstration experiments are carried out. Experimental results show that the accuracy of the proposed optical wireless indoor localization system is independent on the localization light strength, and that an average localization error as small as 2.5 cm is attained, which is 80% better than the accuracy of previously reported optical wireless indoor localization systems.
RESUMO
This letter proposes what we believe is a novel time-slot coding (TSC) scheme to provide optical wireless communications to multiple users simultaneously with limited multiuser interference. We studied the proposed TSC experimentally and our results show that the code alignment tolerance, due to imperfect timing during the code generation process in practice, is 90.2%, 91.8%, and 93.1% with 4-QAM modulation at the received optical power of -22 dBm, -20 dBm, and -18 dBm, respectively. Furthermore, we also demonstrated a proof-of-concept experiment for simultaneous wireless connectivity for up to five users at multiple gross data rates (0.5 Gbps, 1 Gb/s, 1.6 Gb/s, 2 Gb/s, and 2.5 Gb/s).
RESUMO
Solid-state nanopores are promising candidates for next generation DNA and protein sequencing. However, once fabricated, such devices lack tuneability, which greatly restricts their biosensing capabilities. Here we propose a new class of solid-state graphene-based nanopore devices that exhibit a unique capability of self-tuneability, which is used to control their conductance, tuning it to levels comparable to the changes caused by the translocation of a single biomolecule, and hence, enabling high detection sensitivities. Our presented quantum simulation results suggest that the smallest amino acid, glycine, when present in water and in an aqueous saline solution can be detected with high sensitivity, up to a 90% change in conductance. Our results also suggest that passivating the device with nitrogen, making it an n-type device, greatly enhances its sensitivity, and makes it highly sensitive to not only the translocation of a single biomolecule, but more interestingly to intramolecular electrostatics within the biomolecule. Sensitive detection of the carboxyl group within the glycine molecule, which carries a charge equivalent to a single electron, is achieved with a conductance change that reaches as high as 99% when present in an aqueous saline solution. The presented findings suggest that tuneable graphene nanopores, with their capability of probing intramolecular electrostatics, could pave the way towards a new generation of single biomolecule detection devices.
Assuntos
Grafite , Nanoporos , Eletricidade Estática , Elétrons , Glicina/análiseRESUMO
Silicene is an exciting two-dimensional material that shares many of graphene's electronic properties, but differs in its structural buckling. This buckling allows opening a bandgap in silicene through the application of a perpendicular electric field. Here we show that this buckling also enables highly effective modulation of silicene's conductance by means of an in-plane electric field applied through silicene side gates, which can be realized concurrently within the same silicene monolayer. We illustrate this by using silicene to implement Self-Switching Diodes (SSDs), which are two-dimensional field effect nanorectifiers realized within a single silicene monolayer. Our quantum simulation results show that the atomically-thin silicene SSDs, with sub-10 nm dimensions, achieve a current rectification ratio that exceeds 200, without the need for doping, representing a 30 fold enhancement over graphene SSDs. We attribute this enhancement to a bandgap opening due to the in-plane electric field, as a consequence of silicene's buckling. Our results suggest that silicene is a promising material for the realization of planar field effect devices.
RESUMO
In this Letter, we propose a novel indoor localization system based on optical wireless technology. By using the same architecture as the high-speed full-duplex indoor optical wireless communication system, the "search and scan" process, and the added transmission power and beam footprint information in the "search and scan" message, indoor localization functionality is achieved. Proof-of-concept experiments are carried out, and results show that an average error of <15 cm is achieved with a localization beam size of 1 m. In addition, the major localization-accuracy-limiting factors are analyzed both theoretically and experimentally. When incorporated with the optical wireless communication system, high-speed indoor wireless personal area networks can be achieved.
RESUMO
In this Letter, we propose and experimentally demonstrate a free-space based reconfigurable card-to-card optical interconnect architecture with 16-carrierless-amplitude-phase modulation. Experimental results show that up to 120 Gb/s (3×40 Gb/s) flexible interconnection can be achieved for up to 30 cm distance with a worst-case receiver sensitivity of -9.70 dBm.
RESUMO
We present an asymmetrically-gated Graphene Self-Switching Diode (G-SSD) as a new negative differential resistance (NDR) device, and study its transport properties using nonequilibrium Green's function (NEGF) formalism and the Extended Huckel (EH) method. The device exhibits a new NDR mechanism, in which a very small quantum tunnelling current is used to control a much-larger channel conduction current, resulting in a very pronounced NDR effect. This NDR effect occurs at low bias voltages, below 1 V, and results in a very high current peak in the µA range and a high peak-to-valley current ratio (PVCR) of 40. The device has an atomically-thin structure with sub-10 nm dimensions, and does not require any doping or external gating. These results suggest that the device has promising potential in applications such as high frequency oscillators, memory devices, and fast switches.
RESUMO
Graphene normally behaves as a semimetal because it lacks a bandgap, but when it is patterned into nanoribbons a bandgap can be introduced. By varying the width of these nanoribbons this band gap can be tuned from semiconducting to metallic. This property allows metallic and semiconducting regions within a single Graphene monolayer, which can be used in realising two-dimensional (2D) planar Metal-Insulator-Semiconductor field effect devices. Based on this concept, we present a new class of nano-scale planar devices named Graphene Self-Switching MISFEDs (Metal-Insulator-Semiconductor Field-Effect Diodes), in which Graphene is used as the metal and the semiconductor concurrently. The presented devices exhibit excellent current-voltage characteristics while occupying an ultra-small area with sub-10â nm dimensions and an ultimate thinness of a single atom. Quantum mechanical simulation results, based on the Extended Huckel method and Nonequilibrium Green's Function Formalism, show that a Graphene Self-Switching MISFED with a channel as short as 5â nm can achieve forward-to-reverse current rectification ratios exceeding 5000.
RESUMO
In this paper, we propose and experimentally demonstrate a free-space based high-speed reconfigurable card-to-card optical interconnect architecture with broadcast capability, which is required for control functionalities and efficient parallel computing applications. Experimental results show that 10 Gb/s data can be broadcast to all receiving channels for up to 30 cm with a worst-case receiver sensitivity better than -12.20 dBm. In addition, arbitrary multicasting with the same architecture is also investigated. 10 Gb/s reconfigurable point-to-point link and multicast channels are simultaneously demonstrated with a measured receiver sensitivity power penalty of ~1.3 dB due to crosstalk.
RESUMO
In this paper, we experimentally demonstrate a high-speed free-space reconfigurable card-to-card optical interconnect architecture employing MEMS-based steering mirror arrays for simple and efficient link selection. A printed-circuit-board (PCB) based interconnect module is developed and 3 × 10 Gb/s reconfigurable card-to-card optical interconnect with a bit-error-rate (BER) of ~10(-6) for up to 30 cm is realized using a 250 µm pitch-size micro-lens array. In addition, due to the usage of MEMS steering-mirrors, larger lenses can be employed at the receiver side for collecting stronger optical signal power to increase the achievable interconnect range or to improve the BER performance. Experimental results show that with 1-mm diameter lenses the interconnect distance can exceed 80 cm.
Assuntos
Eletrônica/instrumentação , Lentes , Iluminação/instrumentação , Sistemas Microeletromecânicos/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
In this paper, a high-speed reconfigurable card-to-card optical interconnect architecture based on hybrid free-space and multi-mode fiber (MMF) propagation is proposed. The use of free-space signal transmission provides flexibility and reconfigurability and the MMF extends the achievable interconnection range. A printed-circuit-board (PCB) based integrated optical interconnect module is designed and developed and proof-of-concept demonstration experiments are carried out. Results show that 3 × 10 Gb/s reconfigurable optical interconnect is realized with ~12 cm free-space propagation and a 10 m MMF length. In addition, since air turbulence due to high temperature of electronic components and heat dissipation fans always exists in typical interconnect environments and it normally results in system performance degradation, its impact on the proposed reconfigurable optical interconnect scheme is also experimentally investigated. Results indicate that even with comparatively strong air turbulence, 3 × 10 Gb/s optical interconnects with flexibility can still be achieved and the power penalty is <0.7 dB.